ISDN-OPT-MIB: View SNMP OID List / Download MIB

VENDOR: CODEX


 Home MIB: ISDN-OPT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 codex 1.3.6.1.4.1.449
         cdxProductSpecific 1.3.6.1.4.1.449.2
             cdx6500 1.3.6.1.4.1.449.2.1
                 cdx6500Configuration 1.3.6.1.4.1.449.2.1.2
                     cdx6500CfgGeneralGroup 1.3.6.1.4.1.449.2.1.2.2
                         isgIsdnCfgGroup 1.3.6.1.4.1.449.2.1.2.2.19
                               isgVGIsdnCfgChanTable 1.3.6.1.4.1.449.2.1.2.2.19.1 no-access
This table contains ISDN Channel Configuration parameters.
                                   isgVGIsdnCfgChanTableEntry 1.3.6.1.4.1.449.2.1.2.2.19.1.1 no-access
An ISDN Channel Configuration Table Entry.
                                       isgVGIsdnCfgEntryNum 1.3.6.1.4.1.449.2.1.2.2.19.1.1.1 integer read-only
This indicates the Channel Configuration Table Entry Number.
                                       isgVGIsdnCfgChanType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.2 integer read-only
ISDN Channel Type. Enumeration: 'isdn2B': 5, 'isdnNone': 1, 'isdnB': 6, 'isdnD': 2, 'isdnB2': 4, 'isdnB1': 3.
                                       isgVGIsdnCfgDChanPort 1.3.6.1.4.1.449.2.1.2.2.19.1.1.3 integer read-write
The associated port for the ISDN D-channel. dchanzero : Both B channels have access type Permanent. No D Channel data. dchanone : Packet Data on D-channel (Port 1 Type = X25) or B-channel access type is Switched type. dchanfour : Packet Data on D-Channel (Port 4 Type = X25). nc : Skipped during configuration. Enumeration: 'dchanone': 2, 'dchanfour': 5, 'dchanzero': 1, 'nc': 100.
                                       isgVGIsdnCfgSwitchType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.4 integer read-write
Specifies switch type for the central office. bri1tr6Stype : German National ISDN. bri5essStype : AT&T switch briDms100Stype : DMS 100. briKddStype : Japanese International Access ISDN. briEtsiStype : Euro ISDB BRI (NET3). briNi1Stype : National ISDN version 1. briNttStype : Japanese National ISDN. briTs013Stype : Australian National ISDN. briVnStype : France National ISDN. Enumeration: 'briNttStype': 13, 'briKddStype': 8, 'briNi1Stype': 11, 'bri5essStype': 3, 'briDms100Stype': 6, 'briEtsiStype': 9, 'briVnStype': 15, 'briTs013Stype': 14, 'bri1tr6Stype': 2.
                                       isgVGIsdnCfgDChanTEI 1.3.6.1.4.1.449.2.1.2.2.19.1.1.5 integer read-write
The Terminal Endpoint Identifier value is provided by the service provider. The range for TEI is 0..63, 127, 255. If the Switch Type is configured as DMS-1, the possible range for TEI selection will be limited to 1..63. If TEI is configured to 255, the next valid TEI will be used and if TEI is configured to 127, automatic TEI negotiation will take place.
                                       isgVGIsdnCfgDPckTraffic 1.3.6.1.4.1.449.2.1.2.2.19.1.1.6 integer read-write
enable : Signalling and X.25 data over the D Channel. disable : Only signalling data over the D Channel. Enumeration: 'enable': 2, 'disable': 1.
                                       isgVGIsdnCfgDChanDN 1.3.6.1.4.1.449.2.1.2.2.19.1.1.7 displaystring read-write
Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider.
                                       isgVGIsdnCfgDSPID 1.3.6.1.4.1.449.2.1.2.2.19.1.1.8 displaystring read-write
The Service Profile ID identifies the service profile and is provided by the ISDN service provider.
                                       isgVGIsdnCfgFirstBChanPort 1.3.6.1.4.1.449.2.1.2.2.19.1.1.9 integer read-write
0 : No call or TEI activity for the following objects prefixed by `isgVGIsdnCfgFirst' 1-3 : The associated port whose traffic will be on the ISDN B-channel which has the call and TEI objects prefixed by `isgVGIsdnCfgFirst'.
                                       isgVGIsdnCfgFirstAccType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.10 integer read-write
perm : Dedicated (nailed-down) B-channel service. cmd : Dialed B-channel service: Circuit Mode. pmd : Dialed B-channel service: Packet Mode. cvl : Dialed B-channel service: Circuit Mode (Virtual Leased Line). dov : dialed B-channel service: Circuit Mode (Data over voice). Enumeration: 'pmd': 3, 'cvl': 4, 'cmd': 2, 'dov': 5, 'perm': 1.
                                       isgVGIsdnCfgFirstCallDisablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.11 displaystring read-only
The Call Disable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
                                       isgVGIsdnCfgFirstCallEnablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.12 displaystring read-only
The Call Enable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
                                       isgVGIsdnCfgFirstSPBU 1.3.6.1.4.1.449.2.1.2.2.19.1.1.13 integer read-write
This port is configured to carry Same Port Backup (SPBU) feature. This feature requires the corresponding Port's Connection Type be SIMP. Enumeration: 'enable': 2, 'disable': 1.
                                       isgVGIsdnCfgFirstSPBUOpt 1.3.6.1.4.1.449.2.1.2.2.19.1.1.14 displaystring read-write
Same Port Backup (SPBU) feature options This defines the switch back criteria for the backup ISDN line. NONE : No SPBU feature options. TIMEOUT : Based on a pre-configured timeout period. CALL : Based on the status of the Backup ISDN call. Any combination of the above can be specified by summing (e.g. TIMEOUT+CALL).
                                       isgVGIsdnCfgFirstSPBUTmOut 1.3.6.1.4.1.449.2.1.2.2.19.1.1.15 integer read-write
Same Port Backup (SPBU) Timeout Counter. This defines the ISDN call duration time before a return to the leased line is attempted. This parameter is valid when TIMEOUT option is selected. The timeout period is a 1 minute interval.
                                       isgVGIsdnCfgFirstRate 1.3.6.1.4.1.449.2.1.2.2.19.1.1.16 integer read-write
This parameter specifies the line speed for this channel. rate64k : No Adaptation rate128k : Bonded, no adaptation rate56k : Rate Adapted to 64K rate112k : Rate Adapted to 12D8K. Enumeration: 'rate128k': 2, 'rate64k': 1, 'rate56k': 3, 'rate112k': 4.
                                       isgVGIsdnCfgFirstTEI 1.3.6.1.4.1.449.2.1.2.2.19.1.1.17 integer read-write
The value for the TEI (Terminal Endpoint Identifier). is provided by the service provider. The range is 0..63, 127, 255. Select 127 for automatic TEI negotiation and 255 to use Packet D TEI.
                                       isgVGIsdnCfgFirstSPID 1.3.6.1.4.1.449.2.1.2.2.19.1.1.18 displaystring read-write
The Service Profile ID identifies the service profile and is provided by the ISDN service provider.
                                       isgVGIsdnCfgFirstDN 1.3.6.1.4.1.449.2.1.2.2.19.1.1.19 displaystring read-write
Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider.
                                       isgVGIsdnCfgFirstSubAddr 1.3.6.1.4.1.449.2.1.2.2.19.1.1.20 displaystring read-write
Outgoing call : This subaddress will be sent in the call setup message. Incoming call : This subaddress will be used for call verification if provided.
                                       isgVGIsdnCfgFirstOutDialNum1 1.3.6.1.4.1.449.2.1.2.2.19.1.1.21 displaystring read-write
The phone number to dial when establishing an ISDN outbound call.
                                       isgVGIsdnCfgFirstOutDialNum2 1.3.6.1.4.1.449.2.1.2.2.19.1.1.22 displaystring read-write
The phone number to dial if B1 Outbound Dial Number #1 is not available. Alternate attempts will be made between Number#1 and Number#2.
                                       isgVGIsdnCfgFirstDialRetryIntrvl 1.3.6.1.4.1.449.2.1.2.2.19.1.1.23 integer read-write
The Dial Retry Timer defines the time (1 second interval) between ISDN dial attempts. The range is 0, 15-3600. The timer will be disabled by a configuration of 0.
                                       isgVGIsdnCfgFirstNumCallRetries 1.3.6.1.4.1.449.2.1.2.2.19.1.1.24 integer read-write
The Dial Retry Counter specifies the number of times the ISDN will attempt calling at the Call Retry Interval. The value of 0 will allow unlimited number of attempts.
                                       isgVGIsdnCfgSecondChanPort 1.3.6.1.4.1.449.2.1.2.2.19.1.1.25 integer read-write
0 : No call or TEI activity for the following objects prefixed by `isgVGIsdnCfgSecond' 1-3 : The associated port whose traffic will be on the ISDN B-channel which has the call and TEI objects prefixed by `isgVGIsdnCfgSecond'.
                                       isgVGIsdnCfgSecondAccType 1.3.6.1.4.1.449.2.1.2.2.19.1.1.26 integer read-write
perm : Dedicated (nailed-down) B-channel service. cmd : Dialed B-channel service: Circuit Mode. pmd : Dialed B-channel service: Packet Mode. cvl : Dialed B-channel service: Circuit Mode (Virtual Leased Line). dov : dialed B-channel service: Circuit Mode (Data over voice). Enumeration: 'pmd': 3, 'cvl': 4, 'cmd': 2, 'dov': 5, 'perm': 1.
                                       isgVGIsdnCfgSecondCallDisablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.27 displaystring read-only
The Call Disable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
                                       isgVGIsdnCfgSecondCallEnablSTm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.28 displaystring read-only
The Call Enable Start Time indicates whether ISDN calls will/will-not be blocked. This field is blank or displayed in the format `HHMM'. blank : ISDN calls will not be blocked. HHMM : ISDN calls will be blocked starting at HH hour MM minutes.
                                       isgVGIsdnCfgSecondSPBU 1.3.6.1.4.1.449.2.1.2.2.19.1.1.29 integer read-write
This port is configured to carry Same Port Backup (SPBU) feature. This feature requires the corresponding Port's Connection Type be SIMP. Enumeration: 'enable': 2, 'disable': 1.
                                       isgVGIsdnCfgSecondSPBUOpt 1.3.6.1.4.1.449.2.1.2.2.19.1.1.30 displaystring read-write
Same Port Backup (SPBU) feature options This defines the switch back criteria for the backup ISDN line. NONE : No SPBU feature options. TIMEOUT : Based on a pre-configured timeout period. CALL : Based on the status of the Backup ISDN call. Any combination of the above can be specified by summing (e.g. TIMEOUT+CALL).
                                       isgVGIsdnCfgSecondSPBUTmOut 1.3.6.1.4.1.449.2.1.2.2.19.1.1.31 integer read-write
Same Port Backup (SPBU) Timeout Counter. This defines the ISDN call duration time before a return to the leased line is attempted. This parameter is valid when TIMEOUT option is selected.The timeout period is a 1 minute interval.
                                       isgVGIsdnCfgSecondRate 1.3.6.1.4.1.449.2.1.2.2.19.1.1.32 integer read-write
This parameter specifies the line speed for this channel. rate64k : No Adaptation rate56k : Rate Adapted to 64K. Enumeration: 'rate64k': 1, 'rate56k': 3.
                                       isgVGIsdnCfgSecondTEI 1.3.6.1.4.1.449.2.1.2.2.19.1.1.33 integer read-write
The value for the TEI (Terminal Endpoint Identifier). is provided by the service provider. The range is 0..63, 127, 255. Select 127 for automatic TEI negotiation and 255 to use TEI selected for B1.
                                       isgVGIsdnCfgSecondSPID 1.3.6.1.4.1.449.2.1.2.2.19.1.1.34 displaystring read-write
The Service Profile ID identifies the service profile and is provided by the ISDN service provider.
                                       isgVGIsdnCfgSecondDN 1.3.6.1.4.1.449.2.1.2.2.19.1.1.35 displaystring read-write
Local Subscriber Directory Number (DN) DN is provided by the ISDN service provider.
                                       isgVGIsdnCfgSecondSubAddr 1.3.6.1.4.1.449.2.1.2.2.19.1.1.36 displaystring read-write
Outgoing call : This subaddress will be sent in the call setup message. Incoming call : This subaddress will be used for call verification if provided.
                                       isgVGIsdnCfgSecondOutDialNum1 1.3.6.1.4.1.449.2.1.2.2.19.1.1.37 displaystring read-write
The phone number to dial when establishing an ISDN outbound call.
                                       isgVGIsdnCfgSecondOutDialNum2 1.3.6.1.4.1.449.2.1.2.2.19.1.1.38 displaystring read-write
The phone number to dial if B1 Outbound Dial Number #1 is not available. Alternate attempts will be made between Number#1 and Number#2.
                                       isgVGIsdnCfgSecondDialRetryIntrvl 1.3.6.1.4.1.449.2.1.2.2.19.1.1.39 integer read-write
The Dial Retry Timer defines the time (1 second interval) between ISDN dial attempts. The range is 0, 15-3600. The timer will be disabled by a configuration of 0.
                                       isgVGIsdnCfgSecondNumCallRetries 1.3.6.1.4.1.449.2.1.2.2.19.1.1.40 integer read-write
The Dial Retry Counter specifies the number of times the ISDN will attempt calling at the Call Retry Interval. The value of 0 will allow unlimited number of attempts.
                                       isgVGIsdnCfgFirstPlainOldTelSet 1.3.6.1.4.1.449.2.1.2.2.19.1.1.41 displaystring read-write
none: No Telephone support required pots1: Plain Old Telephone Set 1 connected
                                       isgVGIsdnCfgFirstCallPerm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.42 displaystring read-write
out - Initiates Call only, does not accept call inc - Accepts Call only, does not send call to network
                                       isgVGIsdnCfgFirstChSelect 1.3.6.1.4.1.449.2.1.2.2.19.1.1.43 integer read-write
exclusive - implies channel requested will be fixed with the configured selection preferred - it will be up to the network to grant a channel for connection Enumeration: 'exclusive': 3, 'preferred': 1.
                                       isgVGIsdnCfgSecondPlainOldTelSet 1.3.6.1.4.1.449.2.1.2.2.19.1.1.44 displaystring read-write
none: No Telephone support required pots1: Plain Old Telephone Set 1 connected pots2: Plain Old Telephone Set 2 connected
                                       isgVGIsdnCfgSecondCallPerm 1.3.6.1.4.1.449.2.1.2.2.19.1.1.45 displaystring read-write
out - Initiates Call only, does not accept call inc - Accepts Call only, does not send call to network
                                       isgVGIsdnCfgSecondChSelect 1.3.6.1.4.1.449.2.1.2.2.19.1.1.46 integer read-write
exclusive - implies channel requested will be fixed with the configured selection preferred - it will be up to the network to grant a channel for connection Enumeration: 'exclusive': 3, 'preferred': 1.
                 cdx6500Statistics 1.3.6.1.4.1.449.2.1.3
                     cdx6500StatOtherStatsGroup 1.3.6.1.4.1.449.2.1.3.2
                         isgIsdnStatsGroup 1.3.6.1.4.1.449.2.1.3.2.9
                             isgVGIsdnStats 1.3.6.1.4.1.449.2.1.3.2.9.1
                                 isgVGIsdnCCStatsTbl 1.3.6.1.4.1.449.2.1.3.2.9.1.1 no-access
ISDN DSL Current Call Statistics Table.
                                     isgVGIsdnCCStatsTblEntry 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1 no-access
Current Call Statistics Table Entries.
                                         isgVGIsdnCCStatsDSLNum 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.1 integer read-only
Digital Service Loop Number.
                                         isgVGIsdnCCStatsChType 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.2 integer read-only
ISDN Channel Type. Enumeration: 'b2Channel': 3, 'dChannel': 1, 'b1Channel': 2.
                                         isgVGIsdnCCStatsSwtchType 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.3 integer read-only
Switch Type. bri1tr6Stype : German National ISDN. bri5essStype : AT&T switch briDms100Stype : DMS 100. briKddStype : Japanese International Access ISDN. briEtsiStype : Euro ISDB BRI (NET3). briNi1Stype : National ISDN version 1. briNttStype : Japanese National ISDN. briTs013Stype : Australian National ISDN. briVnStype : France National ISDN. unsupported : Unsupported Switch Type. Enumeration: 'briNttStype': 13, 'briKddStype': 8, 'briNi1Stype': 11, 'bri5essStype': 3, 'briDms100Stype': 6, 'briEtsiStype': 9, 'briVnStype': 15, 'briTs013Stype': 14, 'unsupported': 16, 'bri1tr6Stype': 2.
                                         isgVGIsdnCCStatsL1State 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.4 integer read-only
Level1 State. l1Setup : Setup State. l1Active : Active State. l1Deactive : Inactive State. l1B1Loop : Loop Test State. l1B2Loop : Loop Test State. l1B1B2Loop : Loop Test State. l12BDLoop : Loop Test State. unknown : Loop Test State. Enumeration: 'l1Deactive': 3, 'l1Setup': 1, 'l1B1Loop': 4, 'unknown': 8, 'l1B1B2Loop': 6, 'l1B2Loop': 5, 'l1Active': 2, 'l12BDLoop': 7.
                                         isgVGIsdnCCStatsTEI 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.5 integer read-only
Terminal Endpoint Identifier.
                                         isgVGIsdnCCStatsCallgAddr 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.6 displaystring read-only
Current Call Statistics : Calling Address.
                                         isgVGIsdnCCStatsCalldAddr 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.7 displaystring read-only
Current Call Statistics : Called Address.
                                         isgVGIsdnCCStatsSubaddr 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.8 displaystring read-only
Current Call Statistics : Call Subaddress.
                                         isgVGIsdnCCStatsDirection 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.9 integer read-only
Current Call Statistics : Call Direction. noCall : Channel is idle. outgoing : Call is coming from Vanguard into the ISDN network. incoming : Call is coming into Vanguard from the ISDN Network. collision : A Call collision is detected. Enumeration: 'collision': 4, 'outgoing': 2, 'noCall': 1, 'incoming': 3.
                                         isgVGIsdnCCStatsAccType 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.10 integer read-only
Current Call Statistics : Channel Access Type. permanent : Permanent B is selected. cktMode : Dialed B-channel service: Circuit Mode. pktMode : Dialed B-channel service: Packet Mode. cvl : Dialed B-channel service: Circuit Mode (Virtual Leased Line). Enumeration: 'cktMode': 2, 'notApplicable': 5, 'cvl': 4, 'permanent': 1, 'pktMode': 3.
                                         isgVGIsdnCCStatsCallStatus 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.11 integer read-only
Current Call Statistics : Call Status. waitInit : FIT waiting for SPID registration. initFail : FIT's SPID registration has failed. termIdle : Terminal is currently idle (ready for calls). callInit : An outbound call setup is sent. discSent : A disconnect request is sent. hostProc : In Call Proc./Alert State. callConn : An outbound/inbound call is connected. notApplicable : Not applicable to this channel. This object is only applicable to B1/B2 Channels. Enumeration: 'callConn': 7, 'hostProc': 6, 'waitInit': 1, 'callInit': 4, 'discSent': 5, 'notApplicable': 8, 'termIdle': 3, 'initFail': 2.
                                         isgVGIsdnCCStatsLineSpeed 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.12 integer read-only
Current Call Statistics : Line Speed. rate64k : No Adaptation rate128k : Bonded, no adaptation rate56k : Rate Adapted to 64K rate112k : Rate Adapted to 12D8K. Enumeration: 'rate0k': 3, 'rate64k': 1, 'rate56k': 2.
                                         isgVGIsdnCCStatsPortConn 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.13 integer read-only
Current Call Statistics : Port number to carry this call.
                                         isgVGIsdnCCStatsCauseCode 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.14 integer read-only
Current Call Statistics : Cause Code sent/received in the Q.931 message.
                                         isgVGIsdnCCStatsCallStarted 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.15 displaystring read-only
Current Call Statistics : Call Start Time.
                                         isgVGIsdnCCStatsDChanStatus 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.16 integer read-only
enabled : D channel is enabled. disabled : D channel is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                                         isgVGIsdnCCStatsTrmStatus 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.17 integer read-only
fitWaitInit : Fully Initializing Terminal (FIT) is waiting for SPID registration. fitFailed : FIT registration failed, check alarm for cause. fitTimeout : SPID registration has timed out, waiting for retry. networkTimeout : Network is not responding to SPID registration sent. spidError : Network rejected SPID registration due to error in the ID. online : Terminal is ready for ISDN communication. Enumeration: 'fitFailed': 2, 'fitTimeout': 3, 'networkTimeout': 4, 'online': 6, 'spiDerror': 5, 'fitWaitInit': 1.
                                         isgVGIsdnCCStatsTrmTei 1.3.6.1.4.1.449.2.1.3.2.9.1.1.1.18 integer read-only
Terminal (B1/B2) TEI.
                                 isgVGIsdnCHStatsTbl 1.3.6.1.4.1.449.2.1.3.2.9.1.2 no-access
ISDN DSL Call History Table.
                                     isgVGIsdnCHStatsTblEntry 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1 no-access
ISDN DSL Call History Table Entries.
                                         isgVGIsdnCHStatsDSLNum 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.1 integer read-only
Digital Service Loop Number.
                                         isgVGIsdnCHStatsChType 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.2 integer read-only
ISDN Channel Type. Enumeration: 'b2Channel': 2, 'b1Channel': 1.
                                         isgVGIsdnCHStatsSession 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.3 integer read-only
Call Session Number tracked. 0 : Most Recent call. 1 : Previous call. 2 : Oldest call.
                                         isgVGIsdnCHStatsNumCalld 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.4 displaystring read-only
If the call is outgoing, this is the phone number that has been called. If the call is incoming, this is the number that is calling (provided the line has subscribed to Caller ID Display.
                                         isgVGIsdnCHStatsDirection 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.5 integer read-only
Direction of the call. noCall : Channel is idle. outgoing : Call is coming from Vanguard into the ISDN network. incoming : Call is coming into Vanguard from the ISDN Network. collision : A Call collision is detected. Enumeration: 'collision': 4, 'outgoing': 2, 'noCall': 1, 'incoming': 3.
                                         isgVGIsdnCHStatsCauseCode 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.6 integer read-only
Cause Code sent/received in the Q.931 message.
                                         isgVGIsdnCHStatsLineSpeed 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.7 integer read-only
Line Speed for the call. rate64k : No Adaptation rate56k : Rate Adapted to 64K rate0k : Rate Adapted to 0K. Enumeration: 'rate0k': 3, 'rate64k': 1, 'rate56k': 2.
                                         isgVGIsdnCHStatsAsscPort 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.8 integer read-only
Associated Port number to carry this call.
                                         isgVGIsdnCHStatsStrtTm 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.9 displaystring read-only
Call Start Time.
                                         isgVGIsdnCHStatsEndTm 1.3.6.1.4.1.449.2.1.3.2.9.1.2.1.10 displaystring read-only
Call End Time.
                                 isgVGIsdnPRICCStatsTbl 1.3.6.1.4.1.449.2.1.3.2.9.1.3 no-access
ISDN PRI DSL Current Call Statistics Table.
                                     isgVGIsdnPRICCStatsTblEntry 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1 no-access
PRI Current Call Statistics Table Entries.
                                         isgVGIsdnPRICCStatsDSLNum 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.1 integer read-only
Digital Service Loop Number.
                                         isgVGIsdnPRICCStatsSwtchType 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.2 integer read-only
Switch Type. bri1tr6Stype : German National ISDN. priNi2Stype : National ISDN version 2. pri5essStype : AT&T switch priDms100Stype : DMS 100. priNttStype : Japanese National ISDN. priTs014Stype : Australian National ISDN. priEtsiStype : Euro ISDB BRI (NET3). priQsigMStype : Master Side QSIG PBX. priQsigSStype : Slave Side QSIG PBX. priT1QsigMStype : T1 Master Side QSIG PBX. priT1QsigSStype : T1 Slave Side QSIG PBX. unsupported : Unsupported Switch Type. Enumeration: 'priTs014Stype': 6, 'priEtsiStype': 7, 'priUnspecifiedStype': 1, 'unsupported': 12, 'priT1QsigSStype': 11, 'priNttStype': 5, 'pri5essStype': 3, 'priDms100Stype': 4, 'priNi2Stype': 2, 'priQsigSStype': 9, 'priT1QsigMStype': 10, 'priQsigMStype': 8.
                                         isgVGIsdnPRICCStatsDChannelState 1.3.6.1.4.1.449.2.1.3.2.9.1.3.1.3 integer read-only
D Channel Status. dChannelUp : D Channel Up. dChannelDown : D Channel Down. unknown : Loop Test State. Enumeration: 'unknown': 3, 'dChannelUp': 1, 'dChannelDown': 2.
                 cdx6500Controls 1.3.6.1.4.1.449.2.1.4
                     isgIsdnCtrlGroup 1.3.6.1.4.1.449.2.1.4.8
                         isgVGIsdnBootChannel 1.3.6.1.4.1.449.2.1.4.8.1 integer read-write
Boot the ISDN channels. Enumeration: 'boot': 1, 'noBoot': 2.