IRM3-MIB: View SNMP OID List / Download MIB

VENDOR: ENTERASYS NETWORKS INC.


 Home MIB: IRM3-MIB
Download as:   
IRM-OIDS, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 device 1.3.6.1.4.1.52.1.2.1.1
     deviceMMACType 1.3.6.1.4.1.52.1.2.1.1.2 integer read-only
Indicates the type of MMAC. Enumeration: 'mMAC8': 2, 'unknown': 1, 'mMAC5': 3, 'mINIMMAC': 5, 'mMAC3': 4, 'm8Shunting': 14, 'm3Shunt': 7, 'mMAC3Shunting': 11, 'nonFNB': 10, 'mRXI': 6, 'm5Shunt': 8, 'm8FNB': 9, 'mMAC5Shunting': 12, 'mMAC8Shunting': 13.
     deviceSlots 1.3.6.1.4.1.52.1.2.1.1.3 integer read-only
Number of available device slots in this device, including the IRM slot.
     deviceOccupiedSlots 1.3.6.1.4.1.52.1.2.1.1.4 integer read-only
The slots that contain MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 3 indicates that there are boards in the IRM slot and the first MIM slot.
     devicePortsOn 1.3.6.1.4.1.52.1.2.1.1.5 integer read-only
The number of operating ports on the device.
     deviceTotalPorts 1.3.6.1.4.1.52.1.2.1.1.6 integer read-only
The total number of repeater ports on the MMAC.
     deviceTotalPkts 1.3.6.1.4.1.52.1.2.1.1.7 counter read-only
The number of packets detected on all ports of this device.
     deviceTotalErrors 1.3.6.1.4.1.52.1.2.1.1.8 counter read-only
The sum of all of the errors listed including alignment, CRC, runts, giants, and out of window collisions.
     deviceTransmitColls 1.3.6.1.4.1.52.1.2.1.1.9 counter read-only
The number of transmit collisions detected by this MMAC.
     deviceRecColls 1.3.6.1.4.1.52.1.2.1.1.10 counter read-only
The number of receive collisions detected by this MMAC.
     deviceAlignErrs 1.3.6.1.4.1.52.1.2.1.1.11 counter read-only
The number of packets with alignment errors detected.
     deviceCRCErrs 1.3.6.1.4.1.52.1.2.1.1.12 counter read-only
The number of packets with bad CRC detected.
     deviceRunts 1.3.6.1.4.1.52.1.2.1.1.13 counter read-only
The number of runt frames detected by this device.
     deviceOOWColls 1.3.6.1.4.1.52.1.2.1.1.14 counter read-only
The number of out-of-window collisions detected by this device.
     deviceNoResources 1.3.6.1.4.1.52.1.2.1.1.15 counter read-only
The number of No resource condtions detected by this device.
     deviceRecBytes 1.3.6.1.4.1.52.1.2.1.1.16 counter read-only
The number of bytes detected on the network.
     deviceGiantFrames 1.3.6.1.4.1.52.1.2.1.1.17 counter read-only
The number of packets longer than 1518 bytes.
     deviceRestart 1.3.6.1.4.1.52.1.2.1.1.18 integer read-write
If this object is set to 1 the device is restarted.
     deviceResetCounters 1.3.6.1.4.1.52.1.2.1.1.19 integer read-write
If this object is set to 1, all of the devices counters are reset to 0.
     deviceRedundantCts 1.3.6.1.4.1.52.1.2.1.1.20 integer read-only
The number of redundant circuits available for use.
     deviceDiscover 1.3.6.1.4.1.52.1.2.1.1.21 integer read-write
When this variable is set to 1 The following events occur: (1) The device sends a LINK-UP trap (2) The device sends a proprietary packet that will cause all other Cabeltron devices on that local network to send a LINK-UP trap.
     deviceTimeBase 1.3.6.1.4.1.52.1.2.1.1.24 integer read-write
The number of seconds used as the interval for performing all of the rate alarm checks. The minimum is 10 secs.
     deviceResetRedundancy 1.3.6.1.4.1.52.1.2.1.1.25 integer read-write
Setting this object to a 1 will reset redundancy for the entire box.
     deviceSrcAddrAgingTime 1.3.6.1.4.1.52.1.2.1.1.26 integer read-write
The number of minutes that a source address is not detected before it is removed from the source address table.
     deviceSrcAddrTraps 1.3.6.1.4.1.52.1.2.1.1.27 integer read-write
Controls sending of source address related traps. Enumeration: 'trapsOn': 2, 'trapsOff': 1.
     deviceSrcAddrLocked 1.3.6.1.4.1.52.1.2.1.1.28 integer read-write
If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off. Enumeration: 'lockOn': 2, 'lockOff': 1.
     deviceEtherOccupiedSlots 1.3.6.1.4.1.52.1.2.1.1.29 integer read-only
The slots that contain Ethernet MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is an Ethernet board in the first MIM slot.
     deviceTROccupiedSlots 1.3.6.1.4.1.52.1.2.1.1.30 integer read-only
The slots that contain managable Token Ring MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is a managable Token Ring board in the first MIM slot.
     deviceFDDIOccupiedSlots 1.3.6.1.4.1.52.1.2.1.1.31 integer read-only
The slots that contain FDDI MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is an FDDI board in the first MIM slot.
     deviceRestoreDefaults 1.3.6.1.4.1.52.1.2.1.1.32 integer read-write
If this object is set to 1 the factory defaults are restored. This, however, does not affect the device's IP address.
     deviceActiveUsers 1.3.6.1.4.1.52.1.2.1.1.33 integer read-only
The number of active users seen by this device.
     deviceOSIFrames 1.3.6.1.4.1.52.1.2.1.1.34 counter read-only
The number of frames with OSI protocol seen by this device.
     deviceNovellFrames 1.3.6.1.4.1.52.1.2.1.1.35 counter read-only
The number of frames with NOVELL protocol seen by this device.
     deviceBanyanFrames 1.3.6.1.4.1.52.1.2.1.1.36 counter read-only
The number of frames with BANYAN protocol seen by this device.
     deviceDECNetFrames 1.3.6.1.4.1.52.1.2.1.1.37 counter read-only
The number of frames with DECNET protocol seen by this device.
     deviceXNSFrames 1.3.6.1.4.1.52.1.2.1.1.38 counter read-only
The number of frames with XNS protocol seen by this device.
     deviceIPFrames 1.3.6.1.4.1.52.1.2.1.1.39 counter read-only
The number of frames with TCPIP protocol seen by this device.
     deviceCtronFrames 1.3.6.1.4.1.52.1.2.1.1.40 counter read-only
The number of frames with Cabletron protocol seen by this device.
     deviceAppletalkFrames 1.3.6.1.4.1.52.1.2.1.1.41 counter read-only
The number of frames with Appletalk protocol seen by this device.
     deviceOtherFrames 1.3.6.1.4.1.52.1.2.1.1.42 counter read-only
The number of frames seen by this device, that do not fall into any of the previously listed protocol catagories.
     device64To127Frames 1.3.6.1.4.1.52.1.2.1.1.43 counter read-only
The number of frames seen by this device, with frame sizes between 64 and 127 bytes.
     device128To255Frames 1.3.6.1.4.1.52.1.2.1.1.44 counter read-only
The number of frames seen by this device, with frame sizes between 128 and 255 bytes.
     device256To511Frames 1.3.6.1.4.1.52.1.2.1.1.45 counter read-only
The number of frames seen by this device, with frame sizes between 256 and 511 bytes.
     device512To1023Frames 1.3.6.1.4.1.52.1.2.1.1.46 counter read-only
The number of frames seen by this device, with frame sizes between 512 and 1023 bytes.
     device1024To1518Frames 1.3.6.1.4.1.52.1.2.1.1.47 counter read-only
The number of frames seen by this device, with frame sizes between 1024 and 1518 bytes.
     deviceBroadPkts 1.3.6.1.4.1.52.1.2.1.1.48 counter read-only
The sum of broadcast packets detected on all ports of this device.
     deviceMultPkts 1.3.6.1.4.1.52.1.2.1.1.49 counter read-only
The sum of multicast packets detected on all ports of this device.
     deviceThdPartyOccupiedSlots 1.3.6.1.4.1.52.1.2.1.1.51 integer read-only
The slots that contain Third Party MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is a Third Party board in the first MIM slot.
     deviceImimOccupiedSlots 1.3.6.1.4.1.52.1.2.1.1.52 integer read-only
The slots that contain Cabletron Intelligent MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is an Intelligent board in the first MIM slot.
     deviceLinkTraps 1.3.6.1.4.1.52.1.2.1.1.54 integer read-write
Controls sending of link related traps. Enumeration: 'trapsOn': 2, 'trapsOff': 1.
     ctIPDefaultFrameType 1.3.6.1.4.1.52.1.2.1.1.56 integer read-write
Defines the default frame type that will be used by the device. A device will understand both frame types and will respond based upon the framing type that is learned for the given address. This object defines the type of framing that will be used if no framing is known, for example ARP requests. Setting a value of 8022snap(2) will result in framing 802.3 - 802.2 - IP packets being generated by default. Setting a value of ethernet(1) will result in framing ethernet IP packets by default. Enumeration: 'snap8022': 2, 'ethernet': 1.
     deviceSrcAddrType 1.3.6.1.4.1.52.1.2.1.1.57 integer read-write
Selects the hashing algorithm of source addresses, DEC or IP Enumeration: 'ipHash': 1, 'decHash': 2.
 board 1.3.6.1.4.1.52.1.2.1.2
 port 1.3.6.1.4.1.52.1.2.1.3
 sourceAddr 1.3.6.1.4.1.52.1.2.1.7
     sourceAddrBoard 1.3.6.1.4.1.52.1.2.1.7.1 integer read-only
The board number of the port that the supplied source address has been found on.
     sourceAddrPort 1.3.6.1.4.1.52.1.2.1.7.2 integer read-only
The port number of the port that the supplied source address has been found on.
 redundancy 1.3.6.1.4.1.52.1.2.1.8
     redundancyPollInterval 1.3.6.1.4.1.52.1.2.1.8.1 integer read-write
The number of seconds between polls for redundancy.
     redundancyTestTod 1.3.6.1.4.1.52.1.2.1.8.2 octet string read-write
The time of day at which the redundant circuits should be tested.
     redundancyPerformTest 1.3.6.1.4.1.52.1.2.1.8.3 integer read-write
Test the redundant circuit. Enumeration: 'performTest': 1.
     redundancyCircuitName 1.3.6.1.4.1.52.1.2.1.8.4 octet string read-write
The name of the indicated circuit.
     redundancyRetryCount 1.3.6.1.4.1.52.1.2.1.8.5 integer read-write
The number of unanswered polls allowed for the indicated circuit before the current connection is declared bad.
     redundancyNumBPs 1.3.6.1.4.1.52.1.2.1.8.6 integer read-only
The number of board/port combinations associated with the indicated circuit.
     redundancyCircuitBoard 1.3.6.1.4.1.52.1.2.1.8.7 integer read-only
The boards associated with the indicated circuit.
     redundancyCircuitPort 1.3.6.1.4.1.52.1.2.1.8.8 integer read-only
The ports associated with the indicated circuit.
     redundancyCircuitTypes 1.3.6.1.4.1.52.1.2.1.8.9 integer read-only
The type of each port associated with the indicated circuit.
     redundancyCircuitNumAddr 1.3.6.1.4.1.52.1.2.1.8.10 integer read-only
The number of addresses associated with the indicated circuit.
     redundancyCircuitMACAddrAdd 1.3.6.1.4.1.52.1.2.1.8.11 ipaddress read-write
Adds this ethernet address to the polling list for the indicated circuit.
     redundancyCircuitMACAddrDel 1.3.6.1.4.1.52.1.2.1.8.12 ipaddress read-write
Removes this ethernet address from the polling list for the indicated circuit.
     redundancyCircuitMACAddrDisp 1.3.6.1.4.1.52.1.2.1.8.13 ipaddress read-only
The ethernet addresses associated with the indicated circuit, accessed by index.
     redundancyCircuitEnable 1.3.6.1.4.1.52.1.2.1.8.14 integer read-write
Enables and disables the indicated circuit. Enumeration: 'enable': 2, 'disable': 1.
     redundancyCircuitReset 1.3.6.1.4.1.52.1.2.1.8.15 integer read-write
Reset the indicated circuit. Return all of the associated board and ports to NOT-USED, remove associated addresses from the polling list, reset the circuit name and retry count to default values. Enumeration: 'reset': 1.
 alarm 1.3.6.1.4.1.52.1.2.1.9
     devAlrm 1.3.6.1.4.1.52.1.2.1.9.1
         devTraffic 1.3.6.1.4.1.52.1.2.1.9.1.1
             devTrafficEnable 1.3.6.1.4.1.52.1.2.1.9.1.1.1 integer read-write
Enable the sending of device level traffic traps. Enumeration: 'enable': 2, 'disable': 1.
             devTrafficThreshold 1.3.6.1.4.1.52.1.2.1.9.1.1.2 integer read-write
The threshold of packets within the Devicetimebase that will cause a traffic alarm.
         devColls 1.3.6.1.4.1.52.1.2.1.9.1.2
             devCollsEnable 1.3.6.1.4.1.52.1.2.1.9.1.2.1 integer read-write
Enable the sending of device level collision alarms. Enumeration: 'enable': 2, 'disable': 1.
             devCollsThreshold 1.3.6.1.4.1.52.1.2.1.9.1.2.2 integer read-write
This object represents the number of collisions per good packet measured by the device that will generate an alarm.
         devError 1.3.6.1.4.1.52.1.2.1.9.1.3
             devErrorEnable 1.3.6.1.4.1.52.1.2.1.9.1.3.1 integer read-write
Enable the sending of device level error alarms. Enumeration: 'enable': 2, 'disable': 1.
             devErrorThreshold 1.3.6.1.4.1.52.1.2.1.9.1.3.2 integer read-write
This object represents the percentage of errors per good packet that will generate an alarm.
             devErrorSource 1.3.6.1.4.1.52.1.2.1.9.1.3.3 integer read-write
The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRCErrors - Bit 0 - Least Significant Bit runts - Bit 1 OOWColls - Bit 2 alignErrs - Bit 3 NoResource - Bit 4 Giants - Bit 5
         devBroad 1.3.6.1.4.1.52.1.2.1.9.1.4
             devBroadEnable 1.3.6.1.4.1.52.1.2.1.9.1.4.1 integer read-write
Enable the sending of device level broadcast traps. Enumeration: 'enable': 2, 'disable': 1.
             devBroadThreshold 1.3.6.1.4.1.52.1.2.1.9.1.4.2 integer read-write
The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm.
     bdAlrm 1.3.6.1.4.1.52.1.2.1.9.2
         bdTraffic 1.3.6.1.4.1.52.1.2.1.9.2.1
             bdTrafficEnable 1.3.6.1.4.1.52.1.2.1.9.2.1.1 integer read-write
Enable the sending of board level traffic traps for this board. Enumeration: 'enable': 2, 'disable': 1.
             bdTrafficThreshold 1.3.6.1.4.1.52.1.2.1.9.2.1.2 integer read-write
The threshold of packets within the Devicetimebase that will cause a traffic alarm.
             bdTrafficBdDisable 1.3.6.1.4.1.52.1.2.1.9.2.1.3 integer read-write
Permit a board to be disabled on a traffic threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
         bdColls 1.3.6.1.4.1.52.1.2.1.9.2.2
             bdCollsEnable 1.3.6.1.4.1.52.1.2.1.9.2.2.1 integer read-write
Enable the sending of board level collision alarms. Enumeration: 'enable': 2, 'disable': 1.
             bdCollsThreshold 1.3.6.1.4.1.52.1.2.1.9.2.2.2 integer read-write
This object represents the number of collisions per good packet measured by the board that will generate an alarm.
             bdCollsBdDisable 1.3.6.1.4.1.52.1.2.1.9.2.2.3 integer read-write
Permit a board to be disabled on a collision threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
         bdError 1.3.6.1.4.1.52.1.2.1.9.2.3
             bdErrorEnable 1.3.6.1.4.1.52.1.2.1.9.2.3.1 integer read-write
Enable the sending of board level error alarms. Enumeration: 'enable': 2, 'disable': 1.
             bdErrorThreshold 1.3.6.1.4.1.52.1.2.1.9.2.3.2 integer read-write
This object represents the percentage of errors per good packet that will generate an alarm.
             bdErrorSource 1.3.6.1.4.1.52.1.2.1.9.2.3.3 integer read-write
The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRCErrors - Bit 0 Least Significant Bit runts - Bit 1 OOWColls - Bit 2 alignErrs - Bit 3 NoResource - Bit 4 Giants - Bit 5
             bdErrorBdDisable 1.3.6.1.4.1.52.1.2.1.9.2.3.4 integer read-write
Permit a board to be disabled on an error threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
         bdBroad 1.3.6.1.4.1.52.1.2.1.9.2.4
             bdBroadEnable 1.3.6.1.4.1.52.1.2.1.9.2.4.1 integer read-write
Enable the sending of board level broadcast traps for this board. Enumeration: 'enable': 2, 'disable': 1.
             bdBroadThreshold 1.3.6.1.4.1.52.1.2.1.9.2.4.2 integer read-write
The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm.
             bdBroadDisable 1.3.6.1.4.1.52.1.2.1.9.2.4.3 integer read-write
Permit a board to be disabled on a broadcast threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
     portAlrm 1.3.6.1.4.1.52.1.2.1.9.3
         portTraffic 1.3.6.1.4.1.52.1.2.1.9.3.1
             portTrafficEnable 1.3.6.1.4.1.52.1.2.1.9.3.1.1 integer read-write
Enable the sending of port level traffic traps for this port. Enumeration: 'enable': 2, 'disable': 1.
             portTrafficThreshold 1.3.6.1.4.1.52.1.2.1.9.3.1.2 integer read-write
The threshold of packets within the Devicetimebase that will cause a traffic alarm.
             portTrafficPortDisable 1.3.6.1.4.1.52.1.2.1.9.3.1.3 integer read-write
Permit a port to be disabled on a traffic threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
         portColls 1.3.6.1.4.1.52.1.2.1.9.3.2
             portCollsEnable 1.3.6.1.4.1.52.1.2.1.9.3.2.1 integer read-write
Enable the sending of port level collsion alarms. Enumeration: 'enable': 2, 'disable': 1.
             portCollsThreshold 1.3.6.1.4.1.52.1.2.1.9.3.2.2 integer read-write
This object represents the number of collisions per good packet measured by the port that will generate an alarm.
             portCollsPortDisable 1.3.6.1.4.1.52.1.2.1.9.3.2.3 integer read-write
Permit a port to be disabled on a collision threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
         portError 1.3.6.1.4.1.52.1.2.1.9.3.3
             portErrorEnable 1.3.6.1.4.1.52.1.2.1.9.3.3.1 integer read-write
Enable the sending of port level error alarms. Enumeration: 'enable': 2, 'disable': 1.
             portErrorThreshold 1.3.6.1.4.1.52.1.2.1.9.3.3.2 integer read-write
This object represents the percentage of errors per good packet that will generate an alarm.
             portErrorSource 1.3.6.1.4.1.52.1.2.1.9.3.3.3 integer read-write
The type of error used for the error alarm. The integer is a bit encoded version of which errors to include in the error sum. The bits are encoded as follows: CRCErrors - Bit 0 - Least Significant Bit runts - Bit 1 OOWColls - Bit 2 alignErrs - Bit 3 NoResource - Bit 4 Giants - Bit 5
             portErrorPortDisable 1.3.6.1.4.1.52.1.2.1.9.3.3.4 integer read-write
Permit a port to be disabled on an error threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
         portBroad 1.3.6.1.4.1.52.1.2.1.9.3.4
             portBroadEnable 1.3.6.1.4.1.52.1.2.1.9.3.4.1 integer read-write
Enable the sending of port level broadcast alarms. Enumeration: 'enable': 2, 'disable': 1.
             portBroadThreshold 1.3.6.1.4.1.52.1.2.1.9.3.4.2 integer read-write
The threshold of broadcast packets within the Devicetimebase that will cause a broadcast alarm.
             portBroadDisable 1.3.6.1.4.1.52.1.2.1.9.3.4.3 integer read-write
Permit a port to be disabled on a broadcast threshold alarm. Enumeration: 'enable': 2, 'disable': 1.
 deviceR2 1.3.6.1.4.1.52.1.2.2.1
     tokenRingD 1.3.6.1.4.1.52.1.2.2.1.3
         deviceTRPortsOn 1.3.6.1.4.1.52.1.2.2.1.3.1 integer read-only
This gives the number of Token Ring ports enabled on this device.
         deviceTRPorts 1.3.6.1.4.1.52.1.2.2.1.3.2 integer read-only
This gives the total number of Token Ring ports on this device.
         deviceTRRingPortsOn 1.3.6.1.4.1.52.1.2.2.1.3.3 integer read-only
This gives the number of Token Ring ring ports that are enabled.
         deviceTRRingPorts 1.3.6.1.4.1.52.1.2.2.1.3.4 integer read-only
This gives the total number of Token Ring ring ports on this device.
         deviceTRLans 1.3.6.1.4.1.52.1.2.2.1.3.5 integer read-only
This gives the number of Token Rings formed on this device.
         deviceTRBoards 1.3.6.1.4.1.52.1.2.2.1.3.6 integer read-only
This returns the number of Token Ring boards on the device.
         deviceTRBoardMap 1.3.6.1.4.1.52.1.2.2.1.3.7 integer read-only
The slots that contain Token Ring MIM boards. This field is bit encoded (eg. if a bit is set then that board is present). For example, a value of 2 indicates that there is a Token Ring board in the first MIM slot.
 networkR2 1.3.6.1.4.1.52.1.2.2.2
 boardR2 1.3.6.1.4.1.52.1.2.2.3
     commonB 1.3.6.1.4.1.52.1.2.2.3.1
         boardIndex 1.3.6.1.4.1.52.1.2.2.3.1.1 integer read-only
The slot number of this board.
         boardName 1.3.6.1.4.1.52.1.2.2.3.1.2 displaystring read-write
The name of the board. This field will only contain printable ASCII characters.
         boardType 1.3.6.1.4.1.52.1.2.2.3.1.3 integer read-only
The type of the MIM. (eg. FOT, TPT, etc). See appendix A for encoding.
         boardTotalPorts 1.3.6.1.4.1.52.1.2.2.3.1.4 integer read-only
Total number of ports supported on this board.
         boardStatus 1.3.6.1.4.1.52.1.2.2.3.1.5 integer read-write
The administrative status of this MIM. Enumeration: 'disabled': 1, 'enabled': 2.
         boardPortsOn 1.3.6.1.4.1.52.1.2.2.3.1.6 integer read-only
The number of operating ports on the board.
         boardOper 1.3.6.1.4.1.52.1.2.2.3.1.7 integer read-only
Returns a value indicating whether any of the enabled ports on the board are not operational, thereby placing the board in a non-operational state. Enumeration: 'notOperational': 2, 'operational': 1.
         boardActiveUsers 1.3.6.1.4.1.52.1.2.2.3.1.8 integer read-only
The number of active users seen on this board.
     ethernetB 1.3.6.1.4.1.52.1.2.2.3.2
         boardTotalPkts 1.3.6.1.4.1.52.1.2.2.3.2.1 counter read-only
The total number of packets this board has seen since the last reset.
         boardErrorPkts 1.3.6.1.4.1.52.1.2.2.3.2.2 counter read-only
The number of packets that have experienced an error.
         boardTransColls 1.3.6.1.4.1.52.1.2.2.3.2.3 counter read-only
The number of transmit collisions this board has detected.
         boardRecColls 1.3.6.1.4.1.52.1.2.2.3.2.4 counter read-only
The number of Receive mode collisions this board has detected.
         boardAlignErrs 1.3.6.1.4.1.52.1.2.2.3.2.5 counter read-only
The number of misaligned frames this board has detected.
         boardCRCErrs 1.3.6.1.4.1.52.1.2.2.3.2.6 counter read-only
The number of packets with bad CRC detected.
         boardRunts 1.3.6.1.4.1.52.1.2.2.3.2.7 counter read-only
The number of runt frames detected by this board.
         boardOOWColls 1.3.6.1.4.1.52.1.2.2.3.2.8 counter read-only
The number of out-of-window collisions detected by this board.
         boardNoResources 1.3.6.1.4.1.52.1.2.2.3.2.9 counter read-only
The number of times the no resources condition was detected for this board.
         boardRecBytes 1.3.6.1.4.1.52.1.2.2.3.2.10 counter read-only
The number of bytes detected on this board.
         boardGiants 1.3.6.1.4.1.52.1.2.2.3.2.11 counter read-only
The number of packets longer than 1518 bytes detected on this board.
         boardOSIFrames 1.3.6.1.4.1.52.1.2.2.3.2.12 counter read-only
The number of frames with OSI protocol seen by this board.
         boardNovellFrames 1.3.6.1.4.1.52.1.2.2.3.2.13 counter read-only
The number of frames with NOVELL protocol seen by this board.
         boardBanyanFrames 1.3.6.1.4.1.52.1.2.2.3.2.14 counter read-only
The number of frames with BANYAN protocol seen by this board.
         boardDECNetFrames 1.3.6.1.4.1.52.1.2.2.3.2.15 counter read-only
The number of frames with DECNET protocol seen by this board.
         boardXNSFrames 1.3.6.1.4.1.52.1.2.2.3.2.16 counter read-only
The number of frames with XNS protocol seen by this board.
         boardIPFrames 1.3.6.1.4.1.52.1.2.2.3.2.17 counter read-only
The number of frames with TCPIP protocol seen by this board.
         boardCtronFrames 1.3.6.1.4.1.52.1.2.2.3.2.18 counter read-only
The number of frames with Cabletron protocol seen by this board.
         boardAppletalkFrames 1.3.6.1.4.1.52.1.2.2.3.2.19 counter read-only
The number of frames with Appletalk protocol seen by this board.
         boardOtherFrames 1.3.6.1.4.1.52.1.2.2.3.2.20 counter read-only
The number of frames seen by this board, that do not fall into any of the previously listed protocol catagories.
         board64To127Frames 1.3.6.1.4.1.52.1.2.2.3.2.21 counter read-only
The number of frames seen by this board, with frame sizes between 64 and 127 bytes.
         board128To255Frames 1.3.6.1.4.1.52.1.2.2.3.2.22 counter read-only
The number of frames seen by this board, with frame sizes between 128 and 255 bytes.
         board256To511Frames 1.3.6.1.4.1.52.1.2.2.3.2.23 counter read-only
The number of frames seen by this board, with frame sizes between 256 and 511 bytes.
         board512To1023Frames 1.3.6.1.4.1.52.1.2.2.3.2.24 counter read-only
The number of frames seen by this board, with frame sizes between 512 and 1023 bytes.
         board1024To1518Frames 1.3.6.1.4.1.52.1.2.2.3.2.25 counter read-only
The number of frames seen by this board, with frame sizes between 1024 and 1518 bytes.
         boardBroadPkts 1.3.6.1.4.1.52.1.2.2.3.2.26 counter read-only
The sum of broadcast packets detected on all ports of this board.
         boardMultPkts 1.3.6.1.4.1.52.1.2.2.3.2.27 counter read-only
The sum of multicast packets detected on all ports of this board.
         boardSrcAddrLocked 1.3.6.1.4.1.52.1.2.2.3.2.31 integer read-write
If this is set to 2, any source addresses that are detected on station port that are not in the table will cause the port to be turned off. Enumeration: 'lockOn': 2, 'lockOff': 1.
     tokenRingB 1.3.6.1.4.1.52.1.2.2.3.3
         boardTotalRingPorts 1.3.6.1.4.1.52.1.2.2.3.3.1 integer read-only
The total number of ring ports on this board.
         boardTotalStationPorts 1.3.6.1.4.1.52.1.2.2.3.3.2 integer read-only
The total number of station ports on this board.
         boardModeStatus 1.3.6.1.4.1.52.1.2.2.3.3.3 integer read-write
This describes the mode of this board. autoMode means the board is using the hardware defaults. mgmtMode means the board is using setting by the user. Enumeration: 'autoMOde': 2, 'mgmtMode': 1.
         boardTotalRingPortsOn 1.3.6.1.4.1.52.1.2.2.3.3.4 integer read-only
The number of enabled ring ports on this board.
         boardTotalStationPortsOn 1.3.6.1.4.1.52.1.2.2.3.3.5 integer read-only
The number of enabled station ports on this board.
         boardSpeed 1.3.6.1.4.1.52.1.2.2.3.3.6 integer read-write
The speed of the board. The board will expect to receive data at this speed. Enumeration: 'sixteenMhz': 16, 'fourMHz': 4.
         ringSpeedFault 1.3.6.1.4.1.52.1.2.2.3.3.7 integer read-only
Data speed of station mismatches configuration speed of board. Board is automatically bypassed. Enumeration: 'noFaultDetected': 1, 'faultDetected': 2.
         boardSpeedFaultPort 1.3.6.1.4.1.52.1.2.2.3.3.8 integer read-only
This object indicates which ring speed detect circuit(s) caused the fault, if there was one. The return code indicates the location on the board feeding the speed detect circuit(s). Ring in means the circuit on the back-up path between the ring out port and the ring in port. FNB means the circuit between the ring in port and the FNB. NotApplicable means that a ring Speed Fault has not occurred. Since more than one circuit can cause the fault, the return code is the sum of the following values: 1 - FNB 2 - RingIn 4 - RingOut 8 - NotApplicable
         boardFirstRingPort 1.3.6.1.4.1.52.1.2.2.3.3.9 integer read-only
This object defines which port on the board is the first ring port. All ring port numbers will be consecutive. Using this in conjunction with BoardRingPorts, all ring port numbers can be determined.
         boardBypassRingPortState 1.3.6.1.4.1.52.1.2.2.3.3.10 integer read-write
This object sets and reports the state of the ring bypass relay on boards which contain a ring bypass relay. The ring bypass relay will separate only the ring ports from the FNB. The FNB only bypasses the station ports on these boards. The illegal value (3) will return an error status if set. Enumeration: 'on': 2, 'off': 1, 'illegal': 3.
     fDDIB 1.3.6.1.4.1.52.1.2.2.3.4
 portR2 1.3.6.1.4.1.52.1.2.2.4
     commonP 1.3.6.1.4.1.52.1.2.2.4.1
         portIndex 1.3.6.1.4.1.52.1.2.2.4.1.1 integer read-only
The slot number of this port.
         portMediaType 1.3.6.1.4.1.52.1.2.2.4.1.2 integer read-only
The type of the port. (eg. FOT, TPT, etc). Enumeration: 'fot': 5, 'laser': 6, 'aui': 2, 'tp': 3, 'utp': 8, 'stp': 7, 'tenbt': 4, 'bnc': 1, 'otherMedia': 10, 'fo': 9.
         portAdminState 1.3.6.1.4.1.52.1.2.2.4.1.3 integer read-write
The administrative status of this port. Enumeration: 'on': 2, 'off': 1.
         portSourceAddr 1.3.6.1.4.1.52.1.2.2.4.1.4 octet string read-only
A source address that has been seen on this port.
         portOper 1.3.6.1.4.1.52.1.2.2.4.1.5 integer read-only
Returns a value indicating whether this port is in an operational state. Enumeration: 'notOperational': 1, 'operational': 2.
         portActiveUsers 1.3.6.1.4.1.52.1.2.2.4.1.6 integer read-only
The number of active users seen on this port.
         portName 1.3.6.1.4.1.52.1.2.2.4.1.7 displaystring read-write
The name of the port. this field will only contain printable ASCII characters.
     ethernetP 1.3.6.1.4.1.52.1.2.2.4.2
         portTopologyType 1.3.6.1.4.1.52.1.2.2.4.2.1 integer read-only
The topological type of the port. Enumeration: 'trunk': 2, 'stations': 1.
         portLinkStatus 1.3.6.1.4.1.52.1.2.2.4.2.2 integer read-only
The state of the link signal for this port. Enumeration: 'linkSignalActive': 2, 'linkSignalInactive': 1, 'linkSignalNotSupported': 3.
         portStatus 1.3.6.1.4.1.52.1.2.2.4.2.3 integer read-only
The network state of this port. Enumeration: 'active': 1, 'segmented': 2.
         portTotalPkts 1.3.6.1.4.1.52.1.2.2.4.2.4 counter read-only
The total number of packets this port has seen since the last reset.
         portErrorPkts 1.3.6.1.4.1.52.1.2.2.4.2.5 counter read-only
The number of packets that have experienced an error.
         portXmitColls 1.3.6.1.4.1.52.1.2.2.4.2.6 counter read-only
The number of Transmit mode collisions this port has detected.
         portRecColls 1.3.6.1.4.1.52.1.2.2.4.2.7 counter read-only
The number of Receive mode collisions this port has detected.
         portAlignErrs 1.3.6.1.4.1.52.1.2.2.4.2.8 counter read-only
The number of misaligned frames this port has detected.
         portCRCErrs 1.3.6.1.4.1.52.1.2.2.4.2.9 counter read-only
The number of packets with bad CRC detected.
         portRunts 1.3.6.1.4.1.52.1.2.2.4.2.10 counter read-only
The number of runt frames detected by this port.
         portOOWColls 1.3.6.1.4.1.52.1.2.2.4.2.11 counter read-only
The number of out-of-window collisions detected by this port.
         portNoResorces 1.3.6.1.4.1.52.1.2.2.4.2.12 counter read-only
The number of times the no resource condition is detected on this port.
         portRecBytes 1.3.6.1.4.1.52.1.2.2.4.2.13 counter read-only
The number of bytes detected on the network.
         portGiants 1.3.6.1.4.1.52.1.2.2.4.2.14 counter read-only
The number of frames longer than 1518 bytes detected on this port.
         portRedundCrt 1.3.6.1.4.1.52.1.2.2.4.2.15 integer read-write
The redundant circuit with which this port is associated.
         portRedundType 1.3.6.1.4.1.52.1.2.2.4.2.16 integer read-write
The type of port this port is in the redundant circuit. The port must be associated with a redundant circuit first, using the object portRedundCrt. Enumeration: 'notUsed': 1, 'backup': 3, 'primary': 2.
         portRedundStatus 1.3.6.1.4.1.52.1.2.2.4.2.17 integer read-write
The current state of this port is in the redundant circuit. The port must be associated with a redundant circuit first, using the object portRedundCrt. Enumeration: 'active': 2, 'notUsed': 1, 'inactive': 3.
         portForceTrunkType 1.3.6.1.4.1.52.1.2.2.4.2.18 integer read-write
This variable forces a port to be a trunk port. Enumeration: 'forced': 2, 'notForced': 1.
         portOSIFrames 1.3.6.1.4.1.52.1.2.2.4.2.19 counter read-only
The number of frames with OSI protocol seen by this port.
         portNovellFrames 1.3.6.1.4.1.52.1.2.2.4.2.20 counter read-only
The number of frames with NOVELL protocol seen by this port.
         portBanyanFrames 1.3.6.1.4.1.52.1.2.2.4.2.21 counter read-only
The number of frames with BANYAN protocol seen by this port.
         portDECNetFrames 1.3.6.1.4.1.52.1.2.2.4.2.22 counter read-only
The number of frames with DECNET protocol seen by this port.
         portXNSFrames 1.3.6.1.4.1.52.1.2.2.4.2.23 counter read-only
The number of frames with XNS protocol seen by this port.
         portIPFrames 1.3.6.1.4.1.52.1.2.2.4.2.24 counter read-only
The number of frames with TCPIP protocol seen by this port.
         portCtronFrames 1.3.6.1.4.1.52.1.2.2.4.2.25 counter read-only
The number of frames with Cabletron protocol seen by this port.
         portAppletalkFrames 1.3.6.1.4.1.52.1.2.2.4.2.26 counter read-only
The number of frames with Appletalk protocol seen by this port.
         portOtherFrames 1.3.6.1.4.1.52.1.2.2.4.2.27 counter read-only
The number of frames seen by this port, that do not fall into any of the previously listed protocol catagories.
         port64To127Frames 1.3.6.1.4.1.52.1.2.2.4.2.28 counter read-only
The number of frames seen by this port, with frame sizes between 64 and 127 bytes.
         port128To255Frames 1.3.6.1.4.1.52.1.2.2.4.2.29 counter read-only
The number of frames seen by this port, with frame sizes between 128 and 255 bytes.
         port256To511Frames 1.3.6.1.4.1.52.1.2.2.4.2.30 counter read-only
The number of frames seen by this port, with frame sizes between 256 and 511 bytes.
         port512To1023Frames 1.3.6.1.4.1.52.1.2.2.4.2.31 counter read-only
The number of frames seen by this port, with frame sizes between 512 and 1023 bytes.
         port1024To1518Frames 1.3.6.1.4.1.52.1.2.2.4.2.32 counter read-only
The number of frames seen by this port, with frame sizes between 1024 and 1518 bytes.
         portBroadPkts 1.3.6.1.4.1.52.1.2.2.4.2.33 counter read-only
The sum of broadcast packets detected on this port.
         portMultPkts 1.3.6.1.4.1.52.1.2.2.4.2.34 counter read-only
The sum of multicast packets detected on this port.
         portSrcAddrLocked 1.3.6.1.4.1.52.1.2.2.4.2.38 integer read-write
If this is set to 2, any source addresses that are detected on station ports that are not in the table will cause the port to be turned off. Enumeration: 'lockOn': 2, 'lockOff': 1.
     tokenRingP 1.3.6.1.4.1.52.1.2.2.4.3
         stationP 1.3.6.1.4.1.52.1.2.2.4.3.1
             stationPortLinkStatus 1.3.6.1.4.1.52.1.2.2.4.3.1.1 integer read-only
When station is supplying phantom current the Link Signal is active. When there is no phantom current the Link Signal is inactive. Enumeration: 'linkSignalActive': 2, 'linkSignalInactive': 1.
             stationPortLinkStateTime 1.3.6.1.4.1.52.1.2.2.4.3.1.2 integer read-write
The amount of in seconds which have elapsed since the station port last changed state. Note: setting this to zero will clear the time.
         ringP 1.3.6.1.4.1.52.1.2.2.4.3.2
             ringPortLinkStatus 1.3.6.1.4.1.52.1.2.2.4.3.2.1 integer read-only
Reports the link state of a ring port. Enumeration: 'on': 2, 'off': 1.
             ringPortLinkStateTime 1.3.6.1.4.1.52.1.2.2.4.3.2.2 integer read-write
Reports the time (in seconds) since the ring port's link state changed.
         ringPort2 1.3.6.1.4.1.52.1.2.2.4.3.3
             commonRP 1.3.6.1.4.1.52.1.2.2.4.3.3.1
                 commonRPcapabilities 1.3.6.1.4.1.52.1.2.2.4.3.3.1.1 integer read-only
This object returns a code indicating that the queried ring port is nonautowrap, autowrap or selectable. Enumeration: 'selectable': 3, 'autowrap': 2, 'nonAutowrap': 1.
             autowrapRP 1.3.6.1.4.1.52.1.2.2.4.3.3.2
                 autowrapRPFaultStatus 1.3.6.1.4.1.52.1.2.2.4.3.3.2.1 integer read-only
This object reports the wire fault of an autowrappable ring port. Enumeration: 'faultUndetectable': 1, 'noFaultDetected': 2, 'faultDetected': 3.
                 autowrapRPFaultStateTime 1.3.6.1.4.1.52.1.2.2.4.3.3.2.2 integer read-write
This object reports the amount of time in time ticks since the ring port fault state last changed. Writing zero to this object resets the time. If a zero is read, it means either zero time ticks have passed or the ring port is nonautowrap.
                 autowrapRPSelectedType 1.3.6.1.4.1.52.1.2.2.4.3.3.2.3 integer read-write
This object indicates the media type of the indicated ring port on some boards. Some boards provide both STP and fiber optic ring ports. The unselectable value will return an error if set. A set of STP or FO for a non-selectable ring port will not do anything, i.e. the status of normal is returned. Enumeration: 'unselectable': 1, 'stp': 2, 'fo': 3.
                 autowrapRPPhantomCurrent 1.3.6.1.4.1.52.1.2.2.4.3.3.2.4 integer read-write
This object tells the board to turn on phantom current for the ring port and look for wire faults. NoPhantomAvailable will return an error if set. A set of activatePhantom or deactivatePhantom for a non-autowrap ring port will not do anything, i.e. the status of normal is returned. Enumeration: 'noPhantomAvailable': 1, 'deactivatePhantom': 3, 'activatePhantom': 2.
     fDDIP 1.3.6.1.4.1.52.1.2.2.4.4
 fNB 1.3.6.1.4.1.52.1.6.1.1
     connectedLeft 1.3.6.1.4.1.52.1.6.1.1.1 integer read-write
The Connected Left board (board n + 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY). Enumeration: 'faulted': 3, 'detached': 1, 'attached': 2.
     connectedRight 1.3.6.1.4.1.52.1.6.1.1.2 integer read-write
The Connected Right board (board n - 1) has the following states: Detached == 1 (Management (only management) detached, read/write). Attached == 2 (Management/AutoMode attached, read/write ). Faulted == 3 (Management/AutoMode tried to attach but failed READ ONLY). Enumeration: 'faulted': 3, 'detached': 1, 'attached': 2.
     boardBypassState 1.3.6.1.4.1.52.1.6.1.1.3 integer read-write
This object indicates that the board is in the bypassed state when it is ON. Bypassed means the board is NOT attached to the FNB. Enumeration: 'on': 2, 'off': 1.