IPV6-TUNNEL-MIB: View SNMP OID List / Download MIB

VENDOR: QUANTA COMPUTER INC.


 Home MIB: IPV6-TUNNEL-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, QUANTA-SWITCH-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ipv6Tunnel 1.3.6.1.4.1.7244.2.27
The Quanta Private MIB for IPV6 Tunnel
       agentTunnelIPV6Group 1.3.6.1.4.1.7244.2.27.1
           agentTunnelIPV6Table 1.3.6.1.4.1.7244.2.27.1.1 no-access
A summary table of the IPV6 tunnel instances
               agentTunnelIPV6Entry 1.3.6.1.4.1.7244.2.27.1.1.1 no-access
                   agentTunnelID 1.3.6.1.4.1.7244.2.27.1.1.1.1 integer32 no-access
The tunnel ID is associated with Internal Interface number which is generated when we create a tunnel, and is used to configure the tunnel.
                   agentTunnelIfIndex 1.3.6.1.4.1.7244.2.27.1.1.1.2 integer32 read-only
The external interface of the tunnel is associted with internal interface. The tunnel ID associated with Internal Interface number is generated when we create a tunnel, which is used to configure the tunnel.
                   agentTunnelMode 1.3.6.1.4.1.7244.2.27.1.1.1.3 integer read-only
Specifies the type of Tunnel either undefined, 6over4 or 6to4. The default value is undefined. It supports 6over4 which supports an assigned IPV6 address, an IPV4 address is not allowed. For this mode, the tunnel source and tunnel destination must be IPV4 address. For 6to4 tunnel, the tunnel source must be IPv4 address. Tunnel destination should not be set. The first 48-bits of the IPv4 address assigned to the 6to4 tunnel should be of the format 2002:sourceIpv4address. Enumeration: 'ip6over4': 2, 'undefined': 1, 'ip6to4': 3.
                   agentTunnelLocalIP4Addr 1.3.6.1.4.1.7244.2.27.1.1.1.4 inetaddressipv4 read-write
The address of the Local endpoint of the tunnel i.e. the source address used in the outer IP header. It is 0.0.0.0 if unknown or the tunnel is over IPv6.
                   agentTunnelRemoteIP4Addr 1.3.6.1.4.1.7244.2.27.1.1.1.5 inetaddressipv4 read-write
The address of the Remote endpoint of the tunnel i.e. the destination address used in the outer IP header. It is 0.0.0.0 if the tunnel is unknown or IPv6 address, or not a point to point link
                   agentTunnelLocalIfIndex 1.3.6.1.4.1.7244.2.27.1.1.1.6 integer32 read-write
Specifies the interface for IPv6 Tunnel Source
                   agentTunnelStatus 1.3.6.1.4.1.7244.2.27.1.1.1.7 rowstatus read-only
Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance
                   agentTunnelIcmpUnreachableMode 1.3.6.1.4.1.7244.2.27.1.1.1.8 integer read-only
Specifies the Mode of Sending ICMPv6 Unreachable messages on this tunnel interface. Enumeration: 'enable': 1, 'disable': 2.
           agentTunnelIPV6PrefixTable 1.3.6.1.4.1.7244.2.27.1.2 no-access
A table of the IPV6 prefixes associated with tunnel instances
               agentTunnelIPV6PrefixEntry 1.3.6.1.4.1.7244.2.27.1.2.1 no-access
                   agentTunnelIPV6PrefixPrefix 1.3.6.1.4.1.7244.2.27.1.2.1.1 ipv6addressprefix no-access
The prefix associated with the tunnel interface. The data type is used to model the IPV6 address. It is a binary string of 16 octects in network byte-order. It specifies the IP address of tunnel which will be in IPV6 Format, generated using internal interface number.
                   agentTunnelIPV6PrefixPrefixLen 1.3.6.1.4.1.7244.2.27.1.2.1.2 inetaddressprefixlength no-access
The length of the prefix (in bits).
                   agentTunnelIPV6PrefixStatus 1.3.6.1.4.1.7244.2.27.1.2.1.3 rowstatus read-only
Status of this instance.Row can be added or deleted by setting the value to createAndGo/destroy active(1) - this Tunnel instance is active createAndGo(4) - set to this value to create an instance destroy(6) - set to this value to delete an instance