IPV4-OSPF-MIB: View SNMP OID List / Download MIB

VENDOR: ARROWPOINT COMMUNICATIONS INC.


 Home MIB: IPV4-OSPF-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, APENT-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 apIpv4OspfMib 1.3.6.1.4.1.2467.1.9.3.2.1
This MIB module describes the ArrowPoint enterprise MIB support for the Routing Information Protocol
 apIpv4OspfRedistributeLocal 1.3.6.1.4.1.2467.1.9.3.2.2 integer read-write
If enabled, local (direct) routes will be advertised by OSPF. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4OspfLocalType 1.3.6.1.4.1.2467.1.9.3.2.3 integer read-write
If local routes are advertised by OSPF, this is the ASE type to use when advertising the routes. Enumeration: 'aseType2': 2, 'aseType1': 1.
 apIpv4OspfLocalMetric 1.3.6.1.4.1.2467.1.9.3.2.4 integer read-write
If local routes are advertised by OSPF, this is the metric to use when advertising the routes.
 apIpv4OspfLocalTag 1.3.6.1.4.1.2467.1.9.3.2.5 integer32 read-write
If local routes are advertised by OSPF, this is the tag value to use when advertising the routes.
 apIpv4OspfRedistributeStatic 1.3.6.1.4.1.2467.1.9.3.2.6 integer read-write
If enabled, static routes will be advertised by OSPF. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4OspfStaticType 1.3.6.1.4.1.2467.1.9.3.2.7 integer read-write
If static routes are advertised by OSPF, this is the ASE type to use when advertising the routes. Enumeration: 'aseType2': 2, 'aseType1': 1.
 apIpv4OspfStaticMetric 1.3.6.1.4.1.2467.1.9.3.2.8 integer read-write
If static routes are advertised by OSPF, this is the metric to use when advertising the routes.
 apIpv4OspfStaticTag 1.3.6.1.4.1.2467.1.9.3.2.9 integer32 read-write
If static routes are advertised by OSPF, this is the tag value to use when advertising the routes.
 apIpv4OspfRedistributeRip 1.3.6.1.4.1.2467.1.9.3.2.10 integer read-write
If enabled, RIP routes will be advertised by OSPF. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4OspfRipType 1.3.6.1.4.1.2467.1.9.3.2.11 integer read-write
If RIP routes are advertised by OSPF, this is the ASE type to use when advertising the routes. Enumeration: 'aseType2': 2, 'aseType1': 1.
 apIpv4OspfRipMetric 1.3.6.1.4.1.2467.1.9.3.2.12 integer read-write
If RIP routes are advertised by OSPF, this is the metric to use when advertising the routes. If zero is specified, the RIP metric will be used.
 apIpv4OspfRipTag 1.3.6.1.4.1.2467.1.9.3.2.13 integer32 read-write
If RIP routes are advertised by OSPF, this is the tag value to use when advertising the routes.
 apIpv4OspfOriginateDefault 1.3.6.1.4.1.2467.1.9.3.2.14 integer read-write
If enabled, an ASE will be generated for the default route. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4OspfDefaultType 1.3.6.1.4.1.2467.1.9.3.2.15 integer read-write
If a default ASE is originated by OSPF, this is the ASE type to use when advertising the route. Enumeration: 'aseType2': 2, 'aseType1': 1.
 apIpv4OspfDefaultMetric 1.3.6.1.4.1.2467.1.9.3.2.16 integer read-write
If a default ASE is originated by OSPF, this is the metric to use when advertising the route.
 apIpv4OspfDefaultTag 1.3.6.1.4.1.2467.1.9.3.2.17 integer32 read-write
If a default ASE is originated by OSPF, this is the tag value to use when advertising the route.
 apIpv4OspfRedistributeFirewall 1.3.6.1.4.1.2467.1.9.3.2.18 integer read-write
If enabled, firewall routes will be advertised by OSPF. Enumeration: 'enable': 1, 'disable': 2.
 apIpv4OspfFirewallType 1.3.6.1.4.1.2467.1.9.3.2.19 integer read-write
If firewall routes are advertised by OSPF, this is the ASE type to use when advertising the routes. Enumeration: 'aseType2': 2, 'aseType1': 1.
 apIpv4OspfFirewallMetric 1.3.6.1.4.1.2467.1.9.3.2.20 integer read-write
If firewall routes are advertised by OSPF, this is the metric to use when advertising the routes.
 apIpv4OspfFirewallTag 1.3.6.1.4.1.2467.1.9.3.2.21 integer32 read-write
If firewall routes are advertised by OSPF, this is the tag value to use when advertising the routes.
 apIpv4OspfAdvRouteTable 1.3.6.1.4.1.2467.1.9.3.2.22 no-access
A list of routes that are advertised via all OSPF interfaces.
       apIpv4OspfAdvRouteEntry 1.3.6.1.4.1.2467.1.9.3.2.22.1 no-access
A single route to advertise via all OSPF interfaces.
           apIpv4OspfAdvRoutePrefix 1.3.6.1.4.1.2467.1.9.3.2.22.1.1 ipaddress read-only
The route prefix to be advertised.
           apIpv4OspfAdvRoutePrefixLen 1.3.6.1.4.1.2467.1.9.3.2.22.1.2 integer read-only
The network prefix length associated with this route.
           apIpv4OspfAdvRouteType 1.3.6.1.4.1.2467.1.9.3.2.22.1.3 integer read-only
this is the ASE type to use when advertising this route. Enumeration: 'aseType2': 2, 'aseType1': 1.
           apIpv4OspfAdvRouteMetric 1.3.6.1.4.1.2467.1.9.3.2.22.1.4 integer read-only
The metric to use when advertising this route.
           apIpv4OspfAdvRouteTag 1.3.6.1.4.1.2467.1.9.3.2.22.1.5 integer32 read-only
this is the tag value to use when advertising this route.
           apIpv4OspfAdvRouteStatus 1.3.6.1.4.1.2467.1.9.3.2.22.1.6 rowstatus read-only
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
 apIpv4OspfIfAdvRouteTable 1.3.6.1.4.1.2467.1.9.3.2.23 no-access
A list of routes that are advertised via a specific OSPF interface.
       apIpv4OspfIfAdvRouteEntry 1.3.6.1.4.1.2467.1.9.3.2.23.1 no-access
A single route to advertise via a specific OSPF interface.
           apIpv4OspfIfAdvRouteAddress 1.3.6.1.4.1.2467.1.9.3.2.23.1.1 ipaddress read-only
The address of the OSPF interface. If this is a valid unicast IP address, the interface is numbered. Otherwise, it indicates the ifIndex of an unnumbered interface.
           apIpv4OspfIfAdvRoutePrefix 1.3.6.1.4.1.2467.1.9.3.2.23.1.2 ipaddress read-only
The route prefix to be advertised.
           apIpv4OspfIfAdvRoutePrefixLen 1.3.6.1.4.1.2467.1.9.3.2.23.1.3 integer read-only
The network prefix length associated with this route.
           apIpv4OspfIfAdvRouteType 1.3.6.1.4.1.2467.1.9.3.2.23.1.4 integer read-only
this is the ASE type to use when advertising this route. Enumeration: 'aseType2': 2, 'aseType1': 1.
           apIpv4OspfIfAdvRouteMetric 1.3.6.1.4.1.2467.1.9.3.2.23.1.5 integer read-only
The metric to use when advertising this route.
           apIpv4OspfIfAdvRouteTag 1.3.6.1.4.1.2467.1.9.3.2.23.1.6 integer32 read-only
this is the tag value to use when advertising this route.
           apIpv4OspfIfAdvRouteStatus 1.3.6.1.4.1.2467.1.9.3.2.23.1.7 rowstatus read-only
This variable displays the status of the en- try. Setting it to 'invalid' has the effect of rendering it inoperative. The internal effect (row removal) is implementation dependent.
 apIpv4OspfEqualCostRoutes 1.3.6.1.4.1.2467.1.9.3.2.24 integer read-write
The maximum number of equal-cost routes OSPF can use.