INTEL-DIAG-MIB: View SNMP OID List / Download MIB
VENDOR: INTEL CORPORATION
| Home | MIB: INTEL-DIAG-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| diag | 1.3.6.1.4.1.343.6.4 | |||
| diagList | 1.3.6.1.4.1.343.6.4.1 | |||
| diagListNumberOfEntries | 1.3.6.1.4.1.343.6.4.1.1 | integer | read-write |
Number of entries in Diagnostics Table (Set value to 0 to delete all entries) |
| diagListNumberOfErrorEntries | 1.3.6.1.4.1.343.6.4.1.2 | integer | read-only |
Number of errors in Diagnostics Table |
| diagListLastUpdateTime | 1.3.6.1.4.1.343.6.4.1.3 | timeticks | read-only |
Time of last insertion in Diagnostics Table in timeticks since boot (reinserting an existing entry is not considered an update). |
| diagListTable | 1.3.6.1.4.1.343.6.4.1.4 | no-access |
Diagnostics Table |
|
| 1.3.6.1.4.1.343.6.4.1.4.1 | no-access | |||
| diagListIndex | 1.3.6.1.4.1.343.6.4.1.4.1.1 | integer | read-only |
Position in table. |
| diagListLevel | 1.3.6.1.4.1.343.6.4.1.4.1.2 | integer | read-only |
Error level. Enumeration: 'warning': 32, 'fatalError': 96, 'error': 64. |
| diagListCode | 1.3.6.1.4.1.343.6.4.1.4.1.3 | integer | read-only |
Number that uniquely identifies a specific situation. Set code to zero to delete the entry. |
| diagListIfindex | 1.3.6.1.4.1.343.6.4.1.4.1.4 | integer | read-only |
Interface index. |
| diagListTimeStamp | 1.3.6.1.4.1.343.6.4.1.4.1.5 | timeticks | read-only |
Time of (re)insertion in timeticks since boot. |
| diagListDescription | 1.3.6.1.4.1.343.6.4.1.4.1.6 | displaystring | read-only |
Description of the problem. |
| diagListAdvice | 1.3.6.1.4.1.343.6.4.1.4.1.7 | displaystring | read-only |
Advice |
| diagListAutoFixAvailable | 1.3.6.1.4.1.343.6.4.1.4.1.8 | integer | read-only |
no: This entry cannot be automatically fixed. yes: This entry can be automatically fixed. Enumeration: 'yes': 2, 'no': 1. |
| diagListAutoFixState | 1.3.6.1.4.1.343.6.4.1.4.1.9 | octet string | read-write |
When reading 0: State = idle(1), autoFixInProgress(3) When writing 0: State = startAutoFix(2) 1: Action 2-5: diagListCode (bigendian) 6-9: diagListIfindex (bigendian) diagListCode and diagListIfindex are used to verify that the correct entry is being fixed. |
| diagTest | 1.3.6.1.4.1.343.6.4.2 | |||
| diagTestTable | 1.3.6.1.4.1.343.6.4.2.1 | no-access | ||
| 1.3.6.1.4.1.343.6.4.2.1.1 | no-access | |||
| diagTestType | 1.3.6.1.4.1.343.6.4.2.1.1.1 | integer | read-only |
Test type |
| diagTestDescription | 1.3.6.1.4.1.343.6.4.2.1.1.2 | octet string | read-only |
Test description |
| diagTestStatus | 1.3.6.1.4.1.343.6.4.2.1.1.3 | integer | read-write |
Test status. Begin a test by setting the value to test(2) and then wait for it to go from testing(3) to ready(1). Enumeration: 'ready': 1, 'test': 2, 'testing': 3. |
| diagAutodetect | 1.3.6.1.4.1.343.6.4.3 | |||
| diagAutodetectTable | 1.3.6.1.4.1.343.6.4.3.1 | no-access |
Autodetection table |
|
| 1.3.6.1.4.1.343.6.4.3.1.1 | no-access | |||
| diagAutodetectType | 1.3.6.1.4.1.343.6.4.3.1.1.1 | integer | read-only |
A number that identifies the group of parameters being autodetected. Res2 is the concatenation of Res2a and Res2b. Possible value are 1: IPX net numbers and frame types on LAN. index = 1.plugno.0.0 result is in res2 with 5 bytes for each frame type in the form 0: protocol (1=TYPE, 2=802.2, 4=SNAP and 5=8023) 1-4: network number So the length of res2 is 5, 10, 15 or 20 depending on the number of frame types on the LAN. The best candidate is the first. 2: ISDN Switch connection. index = 2.plugno.0.0 result is in res1 res1 is 1: connection to switch res1 is 0: no connection to switch plugno=plug number 3: ISDN Local Number Test 4: ISDN Remote Number Test 5: ISDN Switch Type Test 6: ISDN SPID Detect 7: ISDN SPID Test 8: Frame Relay DLCMI and DLCI detection |
| diagAutodetectIndex1 | 1.3.6.1.4.1.343.6.4.3.1.1.2 | integer | read-only |
First index for autodetect situation (typically interface index). |
| diagAutodetectIndex2 | 1.3.6.1.4.1.343.6.4.3.1.1.3 | integer | read-only |
Second index for autodetect situation. |
| diagAutodetectIndex3 | 1.3.6.1.4.1.343.6.4.3.1.1.4 | integer | read-only |
Third index for autodetect situation. |
| diagAutodetectState | 1.3.6.1.4.1.343.6.4.3.1.1.5 | integer | read-write |
Autodetect state ready(1): Test has not been perfomed. startTest(2): Start test stopTest(3): Stop test (only supported for some types) testSucceeded(4): Test succeeded and the result can be found in Res1 and Res2. testFailed(5): Test failed testInProgress(6):Test is in progress. diagAutodetectDuration contains the approximate duration in seconds Typical state sequences after setting state to startTest(1) ->testInProgress(5)->testFailed(4) ->testInProgress(5)->testSucceeded(3) Enumeration: 'testInProgress': 6, 'stopTest': 3, 'testSucceeded': 4, 'startTest': 2, 'ready': 1, 'testFailed': 5. |
| diagAutodetectDuration | 1.3.6.1.4.1.343.6.4.3.1.1.6 | integer | read-only |
Average duration for autodetection (s). 0 means unknown. |
| diagAutodetectRes1 | 1.3.6.1.4.1.343.6.4.3.1.1.7 | counter | read-only |
Result of autodetection. Res1 contains valid information if the value of diagAutodetectState is testSucceeded(3). |
| diagAutodetectRes2a | 1.3.6.1.4.1.343.6.4.3.1.1.8 | octet string | read-only |
Result of autodetection. Res2 contains valid information if the value of diagAutodetectState is testSucceeded(3). |
| diagAutodetectRes2b | 1.3.6.1.4.1.343.6.4.3.1.1.9 | octet string | read-only |
If the result takes up more than 255 bytes of information the rest is put in this Res2b. |
| diagAutodetectPreInput | 1.3.6.1.4.1.343.6.4.3.1.1.10 | octet string | read-write |
Input for test which is set immediately before settting diagAutodetectState to startTest(1). |