INTEL-CSU-HW-MIB: View SNMP OID List / Download MIB

VENDOR: INTEL CORPORATION


 Home MIB: INTEL-CSU-HW-MIB
Download as:   

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 csudsu 1.3.6.1.4.1.343.6.36
       csu 1.3.6.1.4.1.343.6.36.1
           csuInfoTable 1.3.6.1.4.1.343.6.36.1.1 no-access
The CSU Information table.
               csuInfoEntry 1.3.6.1.4.1.343.6.36.1.1.1 no-access
An entry in the CSU Information table.
                   csuInfoLineIndex 1.3.6.1.4.1.343.6.36.1.1.1.1 integer read-only
The index value which uniquely identifies the CSU interface to which this entry is applicable.
                   csuAlarm 1.3.6.1.4.1.343.6.36.1.1.1.2 integer read-only
The currently active alarm condition, if any. Red alarm corresponds to a Loss Of Signal (LOS), and most commonly occurs when the cable is unplugged or broken. Blue alarm indicates that the local equipment is properly connected but that the carrier CSU is sending a unique data pattern, indicating that it has lost its remote data source. Yellow alarm indicates that the local equipment is receiving a valid signal, but this signal indicates that the carrier CSU cannot frmae to a signal from us. This is normal for up to 30 seconds after connection, but if it persists indicates that there is a break in the T1 connection in the direction toward the carrier. Out Of Framing is any other condition severe enough that the local CSU cannot lock onto the signal from the carrier CSU. This may be because of mismatched configurations. Likely candidates are Line Coding and Framing Format. If these are correctly set at both ends, the line should be tested by the T1 service provider. Enumeration: 'csuAlarmNone': 1, 'csuAlarmYELLOW': 8, 'csuAlarmRED': 2, 'csuAlarmOUTOFFRAMING': 16, 'csuAlarmBLUE': 4.
                   csuReceiveLevel 1.3.6.1.4.1.343.6.36.1.1.1.3 integer read-only
The currently detected signal strength. 1:+2 to -7.5db 2:-7.5 to -15db 3:-15 to -22.5db 4: < -22.5 db Enumeration: 'csuReceiveLevelLessThanMinus22Point5': 4, 'csuReceiveLevelMinus7Point5ToMinus15': 2, 'csuReceiveLevelMinus15ToMinus22point5': 3, 'csuReceiveLevelPlus2ToMinus7Point5': 1.
                   csuLoopbackState 1.3.6.1.4.1.343.6.36.1.1.1.4 integer read-only
This variable identifies the current active loopback, if any. Enumeration: 'csuLoopbackNone': 1, 'csuLoopbackLocalPayload': 2, 'csuLoopbackLocalLine': 3, 'csuLoopbackRemoteChannel': 7, 'csuLoopbackRemotePayload': 5, 'csuLoopbackLocalChannel': 4, 'csuLoopbackRemoteLine': 6.
                   csuLossofsynchronization 1.3.6.1.4.1.343.6.36.1.1.1.5 counter read-only
A count of the number of seconds during which a Loss of synchronization has been triggered
                   csuChangeofFrameAlignment 1.3.6.1.4.1.343.6.36.1.1.1.6 counter read-only
A count of the number of times that there has been a change of Frame Alignment
                   csuEightZeroDetect 1.3.6.1.4.1.343.6.36.1.1.1.7 counter read-only
A count of the number of times that a string of 8 contiguous zeros has been detected
                   csuSixteenZeroDetect 1.3.6.1.4.1.343.6.36.1.1.1.8 counter read-only
A count of the number of times that a string of 16 contiguous zeros has been detected
                   csuSeverelyErroredFramingEvent 1.3.6.1.4.1.343.6.36.1.1.1.9 counter read-only
A count of number of severely Severely Errored Framing Events
                   csuB8ZSCodeWordDetect 1.3.6.1.4.1.343.6.36.1.1.1.10 counter read-only
A count of the number of times that a B8ZS Code Word has been detected
                   csuFrameBitError 1.3.6.1.4.1.343.6.36.1.1.1.11 counter read-only
A count of Frame Bit Errors
                   csuReceivePulseDensityViolation 1.3.6.1.4.1.343.6.36.1.1.1.12 counter read-only
A count of Receive Pulse Density Violations
                   csuTransmitPulseDensityViolation 1.3.6.1.4.1.343.6.36.1.1.1.13 counter read-only
A count of Transmit Pulse Density Violations
                   csuJitterAttenuatorLimitTrip 1.3.6.1.4.1.343.6.36.1.1.1.14 counter read-only
A count of Jitter Attenuator Limit Trips
                   csuLossofReceiveClock 1.3.6.1.4.1.343.6.36.1.1.1.15 counter read-only
Loss of Receive Clock
                   csuFramerReceiveCarrierLoss 1.3.6.1.4.1.343.6.36.1.1.1.16 counter read-only
A count of the number of times that a Framer Receive Carrier Loss has ocurred. Because a Framer Receive Carrier Loss is an LOS indicator, this also counts the number of times that the Red alam state has been entered.
                   csuLineCodeViolationCount 1.3.6.1.4.1.343.6.36.1.1.1.17 counter read-only
A count of Line Code Violations
                   csuPathCodeViolationCount 1.3.6.1.4.1.343.6.36.1.1.1.18 counter read-only
A count of Path Code Violations
                   csuMultiframesOutofSyncCount 1.3.6.1.4.1.343.6.36.1.1.1.19 counter read-only
A count of the number of Multiframes which have passed without being able to sucessfully reframe.
                   csuCRC6errors 1.3.6.1.4.1.343.6.36.1.1.1.20 counter read-only
A count of CRC6 errors
                   csuErrorRate 1.3.6.1.4.1.343.6.36.1.1.1.21 displaystring read-only
The CSU error rate. This variable describes a rate in scientific notation.
                   csuLinkState 1.3.6.1.4.1.343.6.36.1.1.1.22 integer read-only
The state of the protocol stack using the CSU Enumeration: 'csuLinkStateDown': 2, 'csuLinkStateUp': 1.
                   csuErrorsThisSecond 1.3.6.1.4.1.343.6.36.1.1.1.23 counter read-only
The number of physical bit errors detected in the last second
                   csuPercentEFS 1.3.6.1.4.1.343.6.36.1.1.1.24 integer read-only
The number of error free seconds as a percentage of the total available seconds
                   csuTXChannelPayload 1.3.6.1.4.1.343.6.36.1.1.1.25 displaystring read-only
Transmit channel payloads, channels 1 through 24
                   csuRXChannelPayload 1.3.6.1.4.1.343.6.36.1.1.1.26 displaystring read-only
Receive channel payloads, channels 1 through 24
                   csuDetectedChannelMap 1.3.6.1.4.1.343.6.36.1.1.1.27 displaystring read-only
The detected channel map. Each channel maps into one BYTE, starting with channel one in the first byte. A value of 0 indicates that channel activity has been detected ON, 1 indicates that the channel is detected OFF, and 2 that the channel state has not yet been determined.
                   csuYellowAlarmCount 1.3.6.1.4.1.343.6.36.1.1.1.28 counter read-only
A count of the number of Yellow alarms
                   csuAISDefects 1.3.6.1.4.1.343.6.36.1.1.1.29 counter read-only
A count of the number of AIS Defects
           csuConfigTable 1.3.6.1.4.1.343.6.36.1.2 no-access
The CSU Configuration table.
               csuConfigEntry 1.3.6.1.4.1.343.6.36.1.2.1 no-access
An entry in the CSU Configuration table.
                   csuConfigLineIndex 1.3.6.1.4.1.343.6.36.1.2.1.1 integer read-only
The index value which uniquely identifies the CSU interface to which this entry is applicable.
                   csuChannelBandwidth 1.3.6.1.4.1.343.6.36.1.2.1.2 integer read-only
Enumeration: 'csu64kbps': 1, 'csuAutoBandwidth': 3, 'csu56kbps': 2.
                   csuDataInversion 1.3.6.1.4.1.343.6.36.1.2.1.3 integer read-only
Enumeration: 'csuNotInverted': 1, 'csuAutoInverted': 3, 'csuInverted': 2.
                   csuDataCoding 1.3.6.1.4.1.343.6.36.1.2.1.4 integer read-only
Enumeration: 'csuNRZ': 1, 'csuNRZI': 2.
                   csuTimingMode 1.3.6.1.4.1.343.6.36.1.2.1.5 integer read-only
Enumeration: 'csuNetworkTiming': 1, 'csuLoopTiming': 2.
                   csuLineBuildOut 1.3.6.1.4.1.343.6.36.1.2.1.6 integer read-only
Line Build out values: to be interpreted as follows: csu0DB(1) 0 LBO 0 dB csu75DB(2) 1 LBO -7.5 dB csu15(3) 2 LBO -15 dB csu225(4) 3 LBO -22.5 dB csu0_133(5) 4 LBO 0 to 133 feet csu133_266(6) 5 LBO 133 to 266 feet csu266_399(7) 6 LBO 266 to 399 feet csu399_533(8) 7 LBO 399 to 533 feet csu533_655(9) 8 LBO 533 to 655 feet Enumeration: 'csu0to133': 5, 'csu399to533': 8, 'csu133to266': 6, 'csu266to399': 7, 'csu0DB': 1, 'csu225DB': 4, 'csu15DB': 3, 'csu75DB': 2, 'csu533to655': 9.
                   csuLineCode 1.3.6.1.4.1.343.6.36.1.2.1.7 integer read-only
Enumeration: 'csuAMI': 2, 'csuAutoLineCoding': 3, 'csuB8ZS': 1.
                   csuPulseDensityEnforcer 1.3.6.1.4.1.343.6.36.1.2.1.8 integer read-only
Enumeration: 'csuPDEnforceON': 2, 'csuPDEnforceOFF': 1.
                   csuFramingFormat 1.3.6.1.4.1.343.6.36.1.2.1.9 integer read-only
Enumeration: 'csuAutoFraming': 3, 'csuESF': 1, 'csuD4': 2.
                   csuJapaneseCRC6 1.3.6.1.4.1.343.6.36.1.2.1.10 integer read-only
Enumeration: 'csuAutoBandwidth': 3, 'csuJapanCRCDisable': 1, 'csuJapanCRCEnable': 2.
                   csuReceiverSensitivity 1.3.6.1.4.1.343.6.36.1.2.1.11 integer read-only
Enumeration: 'csuSensitivityExtended': 1, 'csuSensitivityNormal': 2.
                   csuFDLidleCode 1.3.6.1.4.1.343.6.36.1.2.1.12 integer read-only
Enumeration: 'csuFDLIdleIsFlags': 1, 'csuFdlIdleIsIdles': 2.
                   csuANSIPRMEnable 1.3.6.1.4.1.343.6.36.1.2.1.13 integer read-only
Enumeration: 'csuANSIPRMEnabled': 1, 'csuANSIPRMDisabled': 2.
                   csuANSIPRMaddress 1.3.6.1.4.1.343.6.36.1.2.1.14 integer read-only
Enumeration: 'csuANSIPrm0x38': 1, 'csuANSIPrm0x3a': 2.
                   csuATTresponseEnable 1.3.6.1.4.1.343.6.36.1.2.1.15 integer read-only
Enumeration: 'csuATTResponseEnabled': 1, 'csuATTResponseDisabled': 2.
                   csuATTresponseaddress 1.3.6.1.4.1.343.6.36.1.2.1.16 integer read-only
Enumeration: 'csuATTResponseCSU': 2, 'csuATTResponseDSU': 3, 'csuATTResponseBoth': 1.
                   csuAllocatedChannelMap 1.3.6.1.4.1.343.6.36.1.2.1.17 displaystring read-only
The allocated channel map. Each channel maps into one BYTE, starting with channel one in the first byte. A value indicates that channel is configured ON, and 1 indicates that the channel is configured OFF.
           csuFracTable 1.3.6.1.4.1.343.6.36.1.3 no-access
The CSU Fractional table.
               csuFracEntry 1.3.6.1.4.1.343.6.36.1.3.1 no-access
An entry in the CSU Fractional table.
                   csuFracLineIndex 1.3.6.1.4.1.343.6.36.1.3.1.1 integer read-only
The index value which uniquely identifies the DS1 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value a csuLineIndex object instance.
                   csuFracNumber 1.3.6.1.4.1.343.6.36.1.3.1.2 integer read-only
The channel number for this entry.
                   csuFracInUse 1.3.6.1.4.1.343.6.36.1.3.1.3 integer read-only
Indicates whether this channel has been configured as part of the fractional arrangement. Enumeration: 'csuChannelInUse': 1, 'csuChannelNotInUse': 2.
                   csuFracDetected 1.3.6.1.4.1.343.6.36.1.3.1.4 integer read-only
Indicates the result of channel autodetection. A value of InUse or NotInUse should match the setting of configuration for this channel Enumeration: 'csuChannelUnknown': 3, 'csuChannelInUse': 1, 'csuChannelNotInUse': 2.