INNO-MIB: View SNMP OID List / Download MIB

VENDOR: INNOVAPHONE GMBH


 Home MIB: INNO-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, IF-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 innovaphone 1.3.6.1.4.1.6666
           isdn 1.3.6.1.4.1.6666.1
               l2Table 1.3.6.1.4.1.6666.1.1 no-access
ISDN layer2 table
                   l2Entry 1.3.6.1.4.1.6666.1.1.1 no-access
Layer 2 Entry
                       l2Label 1.3.6.1.4.1.6666.1.1.1.1 displaystring read-only
Name of this Layer 2 instance
                       l2State 1.3.6.1.4.1.6666.1.1.1.2 integer read-only
Indication whether the LAPD layer is active Enumeration: 'down': 1, 'up': 2.
                       l2Mode 1.3.6.1.4.1.6666.1.1.1.3 integer read-only
Interface mode, either NT or TE Enumeration: 'te': 1, 'nt': 2.
                       l1Label 1.3.6.1.4.1.6666.1.1.1.4 displaystring read-only
Name of Layer 1 (physical) instance this Layer 2 instance is working on
               l1PriTable 1.3.6.1.4.1.6666.1.2 no-access
Layer1 table (primary rate interface)
                   l1PriEntry 1.3.6.1.4.1.6666.1.2.1 no-access
Layer 1 Entry (primary rate interface)
                       l1PriLabel 1.3.6.1.4.1.6666.1.2.1.1 displaystring read-only
Name of this Layer 1 instance
                       l1PriState 1.3.6.1.4.1.6666.1.2.1.2 integer read-only
Indication whether the physical layer is active Enumeration: 'down': 1, 'up': 2.
                       l1PriErrCrc4 1.3.6.1.4.1.6666.1.2.1.3 counter read-only
The CRC4 check of a received submultiframe failed.
                       l1PriErrRemAlarmInd 1.3.6.1.4.1.6666.1.2.1.4 counter read-only
Remote Alarm
                       l1PriErrSigLoss 1.3.6.1.4.1.6666.1.2.1.5 counter read-only
Loss of signal
                       l1PriErrAlarmInd 1.3.6.1.4.1.6666.1.2.1.6 counter read-only
Alarm Indication Signal
                       l1PriErrFrameAlignmentTOut 1.3.6.1.4.1.6666.1.2.1.7 counter read-only
Receive Time Out 400 msec
                       l1PriErrFrameAlignmentLoss 1.3.6.1.4.1.6666.1.2.1.8 counter read-only
Loss of Frame Alignment
                       l1PriErrSlip 1.3.6.1.4.1.6666.1.2.1.9 counter read-only
Receive SLIP detected
                       l1PriTest 1.3.6.1.4.1.6666.1.2.1.10 integer read-write
Triggers,resets some hardware alarm counters Enumeration: 'simAlarm': 1, 'resetAlarms': 2, 'noTest': 0.
               l1BriTable 1.3.6.1.4.1.6666.1.3 no-access
Layer1 table (basic rate interface)
                   l1BriEntry 1.3.6.1.4.1.6666.1.3.1 no-access
Layer 1 Entry (basic rate rate interface)
                       l1BriLabel 1.3.6.1.4.1.6666.1.3.1.1 displaystring read-only
Name of this Layer 1 instance
                       l1BriState 1.3.6.1.4.1.6666.1.3.1.2 integer read-only
Indication whether the physical layer is active Enumeration: 'down': 1, 'up': 2.
               l3Table 1.3.6.1.4.1.6666.1.4 no-access
Layer3 table
                   l3Entry 1.3.6.1.4.1.6666.1.4.1 no-access
Layer 3 Entry
                       l3Label 1.3.6.1.4.1.6666.1.4.1.1 displaystring read-only
Name of this Layer 3 instance
                       l3Protocol 1.3.6.1.4.1.6666.1.4.1.2 integer read-only
The Isdn signalling protocol on this interface Enumeration: 'qsig': 23, 'none': 0, 'other': 1, 'etsi': 3.
                       l3NumBchan 1.3.6.1.4.1.6666.1.4.1.3 integer read-only
Number of B-channels available
                       l3NumBchanActive 1.3.6.1.4.1.6666.1.4.1.4 gauge read-only
Number of B-channels currently active. May also be understood as number of calls currently active on this interface.
                       l3CallsBoot 1.3.6.1.4.1.6666.1.4.1.5 counter read-only
Accumulated Number of Calls on this interface since last Boot
           gateway 1.3.6.1.4.1.6666.2
               gatekeeper 1.3.6.1.4.1.6666.2.1
                   voiceIfTable 1.3.6.1.4.1.6666.2.1.1 no-access
Voice Interfaces Table. Features either physical interfaces or aliases.
                       voiceIfEntry 1.3.6.1.4.1.6666.2.1.1.1 no-access
Voice Interfaces Entry.Features either physical interfaces or aliases.
                           voiceIfGwName 1.3.6.1.4.1.6666.2.1.1.1.1 displaystring read-only
Only of interest for aliases to show at which GWxx an alias has been/will be registered
                           voiceIfType 1.3.6.1.4.1.6666.2.1.1.1.2 integer read-only
The type of the interface Enumeration: 'gw': 4, 'gk': 3, 'ep': 2, 'unkown': 0, 'if': 1.
                           voiceIfAddr 1.3.6.1.4.1.6666.2.1.1.1.3 ipaddress read-only
ip address, only of interest if interface state is up
                           voiceIfState 1.3.6.1.4.1.6666.2.1.1.1.4 integer read-only
Interface state Enumeration: 'down': 0, 'up': 1.
                           voiceIfNumber 1.3.6.1.4.1.6666.2.1.1.1.5 displaystring read-only
The E.164 number registered by this interface
                           voiceIfName 1.3.6.1.4.1.6666.2.1.1.1.6 displaystring read-only
The H.323 Name registered by this interface
                           voiceIfProduct 1.3.6.1.4.1.6666.2.1.1.1.7 displaystring read-only
If available the description of the registering product
                           voiceIfIndex 1.3.6.1.4.1.6666.2.1.1.1.8 integer read-only
Increasing index of an interface, utilized as first suboid of entry index.
                           voiceIfAliasIndex 1.3.6.1.4.1.6666.2.1.1.1.9 integer read-only
If interface is an alias, this is the increasing index of alias at an interface. Otherwise -1 will be returned. Utilized as second suboid of entry index.
           trapDummyGroup 1.3.6.1.4.1.6666.3
               trapDisplayStringParm 1.3.6.1.4.1.6666.3.1 displaystring read-only
This variable doesn't exist. Its purpose is to be syntactically referenced as a variable within a trap.
               trapIntegerParm 1.3.6.1.4.1.6666.3.2 integer read-only
This variable doesn't exist. Its purpose is to be syntactically referenced as a variable within a trap.
               trapGaugeParm 1.3.6.1.4.1.6666.3.3 gauge read-only
This variable doesn't exist. Its purpose is to be syntactically referenced as a variable within a trap.
             innoColdStart 1.3.6.1.4.1.66660.0
An unexpected restart happened.
             innoWarmStart 1.3.6.1.4.1.66660.1
The device has been reset administratively.
             innoLinkDown 1.3.6.1.4.1.66660.2
An interface link went down (PPP).
             innoLinkUp 1.3.6.1.4.1.66660.3
An interface link went up.
             innoAuthenticationFailure 1.3.6.1.4.1.66660.4
An Snmp PDU with a wrong community string has been received.
             innoIsdnFailure 1.3.6.1.4.1.66660.5
Obsoleted: This SNMP trap is no longer necessary. Meanwhile it is covered more consistently by innoDiagAlarm and innoDiagAlarmClear. Removed from on v9hf16.
             innoDiagAlarm 1.3.6.1.4.1.66660.6
This trap corresponds to an alarm under Administration/Diagnostics/Alarms
             innoDiagAlarmClear 1.3.6.1.4.1.66660.7
This trap corresponds to an alarm clearing under Administration/Diagnostics/Alarms