IMDM-MIB: View SNMP OID List / Download MIB

VENDOR: UTSTARCOM INCORPORATED


 Home MIB: IMDM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 usr 1.3.6.1.4.1.429
         nas 1.3.6.1.4.1.429.1
             imdm 1.3.6.1.4.1.429.1.19
                   imdmCc 1.3.6.1.4.1.429.1.19.1
                       imdmCcTable 1.3.6.1.4.1.429.1.19.1.1 no-access
A table containing the call control parameters for each modem in the chassis.
                           imdmCcEntry 1.3.6.1.4.1.429.1.19.1.1.1 no-access
Call control parameters for an ISDN modem. These define the sequence of operation related to how a call is negotiated.
                               imdmCcIndex 1.3.6.1.4.1.429.1.19.1.1.1.1 integer read-only
The index which uniquely identifies the modem to which this entry is applicable. The value corresponds to the value of the index to the entity table in the chassis MIB that corresponds to the same modem.
                               imdmCcRateAdapV110 1.3.6.1.4.1.429.1.19.1.1.1.2 integer read-write
This object enables V110 rate adaption corresponds to S register S67 bit 0. Default = enable(2). Enumeration: 'enable': 2, 'disable': 1.
                               imdmCcFixedNtwkRate 1.3.6.1.4.1.429.1.19.1.1.1.3 integer read-write
This object sets the fixed network rate. This object correspond to S register S67 bit 1. Default = 1 Enumeration: 'forceNetworkRate': 2, 'notForced': 1.
                               imdmCcNetworkRate 1.3.6.1.4.1.429.1.19.1.1.1.4 integer read-write
This object sets the Network rate speed. This object corresponds to the modem S register S67 bit 2. Default = 1 Enumeration: 'kbps64': 2, 'kbps56': 1.
                               imdmCcBcLinkDly 1.3.6.1.4.1.429.1.19.1.1.1.5 integer read-write
This object enable a 45 - 65 second link delay. This object corresponds to the S register S67 bit 4. Default = 1 Enumeration: 'delay': 2, 'noDelay': 1.
                               imdmCcAnlgOvrDig 1.3.6.1.4.1.429.1.19.1.1.1.6 integer read-write
This object is used to set S register S68 bit 0 which, does not allow analog calls over digital data connection. Default = 1 Enumeration: 'enable': 1, 'disable': 2.
                               imdmCcAsyncPPP 1.3.6.1.4.1.429.1.19.1.1.1.7 integer read-write
This object is used to disable/enable async PPP/ sync PPP conversion. This object corresponds to S register S68 bit 2. Default = enable(1). Enumeration: 'enable': 1, 'disable': 2.
                               imdmCcX75 1.3.6.1.4.1.429.1.19.1.1.1.8 integer read-write
This object is used to disable/enable X75. This object corresponds to S register S68 bit 3. Default = 1 Enumeration: 'enable': 1, 'disable': 2.
                               imdmCcStarV2 1.3.6.1.4.1.429.1.19.1.1.1.9 integer read-write
This object is used to set the data mode of the modem and is equivalent to *V2 = x AT command. Default =1 Enumeration: 'v120rateAdapOnly': 2, 'autodetect': 1, 'x75': 7, 'asyncSyncPPPconv': 6, 'v110rateAdapOnly': 3, 'modemOrFaxOnly': 4, 'clearChannelSync': 5.
                               imdmCcStarU1 1.3.6.1.4.1.429.1.19.1.1.1.10 integer read-write
This object is used to set the originate HDLC protocols of the modem and is equivalent to *U1 = x AT command. Default =2 Enumeration: 'ppp': 4, 'none': 1, 'x75': 3, 'v120': 2.
                               imdmCcStarU2 1.3.6.1.4.1.429.1.19.1.1.1.11 integer read-write
This object is used to set the originate Non-HDLC protocols of the modem and is equivalent to *U2 = x AT command. Default =1 Enumeration: 'none': 1, 'v110': 2.
                               imdmCcStarU3 1.3.6.1.4.1.429.1.19.1.1.1.12 integer read-write
This object is used to set the originate Analog modem/fax data mode of the modem and is equivalent to *U3 = x AT command. Default =2 Enumeration: 'analogModemFax': 2, 'none': 1.
                               imdmCcV120 1.3.6.1.4.1.429.1.19.1.1.1.13 integer read-write
This Object is used to Enable/Disable V120. This Object corresponds to S register 68 bit 4 default=1 Enumeration: 'enable': 1, 'disable': 2.
                               imdmCcFrameSize 1.3.6.1.4.1.429.1.19.1.1.1.14 integer read-write
This Object is used to set the Frame size for X75. Default = 2048
                               imdmCcWindowSize 1.3.6.1.4.1.429.1.19.1.1.1.15 integer read-write
This Object is used to set the Window Size of X75 default=2
                   imdmLi 1.3.6.1.4.1.429.1.19.2
                       imdmLiTable 1.3.6.1.4.1.429.1.19.2.1 no-access
A list of configurable Line Interface objects for a modem. The number of table entries is given by modem Number.
                           imdmLiEntry 1.3.6.1.4.1.429.1.19.2.1.1 no-access
Objects which define the line interface characteristics for a particular modem.
                               imdmLiIndex 1.3.6.1.4.1.429.1.19.2.1.1.1 integer read-only
Index into the Line Interface table. This index is the value from the chassis mib entity relation table that is applicable for a particular modem.
                               imdmLiConnTypeToCo 1.3.6.1.4.1.429.1.19.2.1.1.2 integer read-write
This object is used to set the type of switch your telephone company Cental Office is using. This object coressponds with the *M AT modem command. Enumeration: 'multipoint': 2, 'pointToPoint': 1.
                               imdmLiDN 1.3.6.1.4.1.429.1.19.2.1.1.3 displaystring read-write
This object is to set the Directory Number (DN) that is assigned by the telephone company. This object corresponds to the *P AT modem command.
                               imdmLiSPID 1.3.6.1.4.1.429.1.19.2.1.1.4 displaystring read-write
This object is to set the Service Profile ID (SPID) that is assigned by the telephone company. This object corresponds to the *S AT modem command.
                               imdmLiTermEndPointID 1.3.6.1.4.1.429.1.19.2.1.1.5 integer read-write
This object is to set the Terminal Endpoint ID (TEI) that is assigned by the telephone company. This object corresponds to the *T AT modem command.
                               imdmLiProtTypeSw 1.3.6.1.4.1.429.1.19.2.1.1.6 integer read-write
This object is to set the Switch Protocol that the telephone company uses. This object corresponds to the *W AT modem command. Enumeration: 'nationalISDN1': 3, 'nationalISDN2': 4, 'aTT5ESSCustom': 1, 'northernTelecomDMS100': 2.