IEEE8021-SRP-MIB: View SNMP OID List / Download MIB

VENDOR: INTERNET-STANDARD


 Home MIB: IEEE8021-SRP-MIB
Download as:   
SNMPv2-CONF, IEEE8021-FQTSS-MIB, SNMPv2-TC, SNMPv2-SMI, IEEE8021-TC-MIB, BRIDGE-MIB, IEEE8021-BRIDGE-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 ieee8021SrpMib 1.3.111.2.802.1.1.19
The Bridge MIB module for managing devices that support the IEEE Std 802.1Q Stream Reservation Protocol. Unless otherwise indicated, the references in this MIB module are to IEEE Std 802.1Q-2014. Copyright (C) IEEE (2014). This version of this MIB module is part of IEEE802.1Q; see the draft itself for full legal notices.
       ieee8021SrpNotifications 1.3.111.2.802.1.1.19.0
       ieee8021SrpObjects 1.3.111.2.802.1.1.19.1
           ieee8021SrpConfiguration 1.3.111.2.802.1.1.19.1.1
               ieee8021SrpBridgeBaseTable 1.3.111.2.802.1.1.19.1.1.1 no-access
A table for SRP main control and status information. All writeable objects in this table must be persistent over power up restart/reboot. These objects augment the ieee8021BridgeBasePortTable.
                   ieee8021SrpBridgeBaseEntry 1.3.111.2.802.1.1.19.1.1.1.1 no-access
SRP control and status information for a Bridge.
                       ieee8021SrpBridgeBaseMsrpEnabledStatus 1.3.111.2.802.1.1.19.1.1.1.1.1 truthvalue read-only
The administrative status requested by management for MSRP. The value true(1) indicates that MSRP should be enabled on this device, in all VLANs, on all ports for which it has not been specifically disabled. When false(2), MSRP is disabled, in all VLANs and on all ports, and all MSRP frames will be forwarded transparently. This objects affects both Applicant and Registrar state machines. A transition from false(2) to true(1) will cause a reset of all MSRP state machines on all ports. This object may be modified while the corresponding instance of ieee8021BridgeBaseRowStatus is active(1). The value of this object MUST be retained across reinitializations of the management system.
                       ieee8021SrpBridgeBaseMsrpTalkerPruning 1.3.111.2.802.1.1.19.1.1.1.1.2 truthvalue read-only
The value of the talkerPruning parameter which controls the propagation of Talker declarations. The value true(1) indicates that Talker attributes are only declared on ports that have the Stream destination_address registered in the MMRP MAC Address Registration Entries. When false(2), Talker attribute are declared on all egress ports in the active topology. The value of this object MUST be retained across reinitializations of the management system.
                       ieee8021SrpBridgeBaseMsrpMaxFanInPorts 1.3.111.2.802.1.1.19.1.1.1.1.3 unsigned32 read-only
The value of the msrpMaxFanInPorts parameter which limits the total number of ports on a Bridge that are allowed to establish reservations for inbound Streams. A value of zero (0) indicates no fan-in limit is being specified and calculations involving fan-in will only be limited by the number of MSRP enabled ports. The value of this object MUST be retained across reinitializations of the management system.
                       ieee8021SrpBridgeBaseMsrpLatencyMaxFrameSize 1.3.111.2.802.1.1.19.1.1.1.1.4 unsigned32 read-only
The value of msrpLatencyMaxFrameSize parameter which is used in the calculation of the maximum latency through a Bridge. The maximum size is defined to be 2000 octets by default, but may be set to a smaller or larger value dependent on the particular Bridge configuration. This parameter does not imply any type of policing of frame size, it is only used in the latency calculations. The value of this object MUST be retained across reinitializations of the management system.
               ieee8021SrpBridgePortTable 1.3.111.2.802.1.1.19.1.1.2 no-access
A table for SRP control and status information about every Bridge Port. Augments the ieee8021BridgeBasePortTable.
                   ieee8021SrpBridgePortEntry 1.3.111.2.802.1.1.19.1.1.2.1 no-access
SRP control and status information for a Bridge Port.
                       ieee8021SrpBridgePortMsrpEnabledStatus 1.3.111.2.802.1.1.19.1.1.2.1.1 truthvalue read-only
The administrative state of MSRP operation on this port. The value true(1) indicates that MSRP is enabled on this port in all VLANs as long as ieee8021BridgeMsrpEnabledStatus is also true(1). A value of false(2) indicates that MSRP is disabled on this port in all VLANs: any MSRP frames received will be silently discarded, and no MSRP registrations will be propagated from other ports. Setting this to a value of true(1) will be stored by the agent but will only take effect on the MSRP protocol operation if ieee8021BridgeMsrpEnabledStatus also indicates the value true(1). This object affects all MSRP Applicant and Registrar state machines on this port. A transition from false(2) to true(1) will cause a reset of all MSRP state machines on this port. The value of this object MUST be retained across reinitializations of the management system.
                       ieee8021SrpBridgePortMsrpFailedRegistrations 1.3.111.2.802.1.1.19.1.1.2.1.2 counter64 read-only
The total number of failed MSRP registrations, for any reason, in all VLANs, on this port. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
                       ieee8021SrpBridgePortMsrpLastPduOrigin 1.3.111.2.802.1.1.19.1.1.2.1.3 macaddress read-only
The Source MAC Address of the last MSRP message received on this port.
                       ieee8021SrpBridgePortSrPvid 1.3.111.2.802.1.1.19.1.1.2.1.4 ieee8021vlanindex read-only
The default VLAN ID that Streams are assigned to. Talkers learn this VID from the SRP Domain attribute and tag Streams accordingly. The value of this object MUST be retained across reinitializations of the management system.
           ieee8021SrpLatency 1.3.111.2.802.1.1.19.1.2
               ieee8021SrpLatencyTable 1.3.111.2.802.1.1.19.1.2.1 no-access
A table containing a set of latency measurement parameters for each traffic class.
                   ieee8021SrpLatencyEntry 1.3.111.2.802.1.1.19.1.2.1.1 no-access
A list of objects containing latency information for each traffic class. Rows in the table are automatically created for ports that are not an SRP domain boundary port (i.e. SRPdomainBoundaryPort is FALSE). See 35.1.4, 8.8.2, 12.22.3.
                       ieee8021SrpTrafficClass 1.3.111.2.802.1.1.19.1.2.1.1.1 ieee8021fqtsstrafficclassvalue no-access
The traffic class number associated with the row of the table. Rows in the table are automatically created for ports that are not an SRP domain boundary port (i.e. SRPdomainBoundaryPort is FALSE).
                       ieee8021SrpPortTcLatency 1.3.111.2.802.1.1.19.1.2.1.1.2 unsigned32 read-only
The value of the portTcMaxLatency parameter for the traffic class. This value is expressed in nano-seconds.
           ieee8021SrpStreams 1.3.111.2.802.1.1.19.1.3
               ieee8021SrpStreamTable 1.3.111.2.802.1.1.19.1.3.1 no-access
A table containing a set of characteristics for each registered Stream.
                   ieee8021SrpStreamEntry 1.3.111.2.802.1.1.19.1.3.1.1 no-access
A list of objects containing characteristics for each registered Stream. Rows in the table are automatically created for Streams registered on any port of a Bridge.
                       ieee8021SrpStreamId 1.3.111.2.802.1.1.19.1.3.1.1.1 ieee8021srpstreamidvalue no-access
The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP.
                       ieee8021SrpStreamDestinationAddress 1.3.111.2.802.1.1.19.1.3.1.1.2 macaddress read-only
The MAC destination address for the Stream described by this reservation.
                       ieee8021SrpStreamVlanId 1.3.111.2.802.1.1.19.1.3.1.1.3 ieee8021vlanindex read-only
The VLAN ID associated with the MSRP registration for this Stream.
                       ieee8021SrpStreamTspecMaxFrameSize 1.3.111.2.802.1.1.19.1.3.1.1.4 unsigned32 read-only
The maximum size frame that will be sent by a Talker for this Stream. This value is part of the Traffic Specification for the Stream.
                       ieee8021SrpStreamTspecMaxIntervalFrames 1.3.111.2.802.1.1.19.1.3.1.1.5 unsigned32 read-only
The maximum number of frame that will be sent during a class measurement interval (L.2). This value is part of the Traffic Specification for the Stream.
                       ieee8021SrpStreamDataFramePriority 1.3.111.2.802.1.1.19.1.3.1.1.6 ieee8021prioritycodepoint read-only
The Priority Code Point (PCP) value that the referenced Stream will be tagged with. This value is used to distinguish Class A and Class B traffic.
                       ieee8021SrpStreamRank 1.3.111.2.802.1.1.19.1.3.1.1.7 ieee8021srpstreamrankvalue read-only
SRP supports emergency and non-emergency. Emergency traffic will interrupt non-emergency traffic if there is insufficient bandwidth or resources available for the emergency traffic.
           ieee8021SrpReservations 1.3.111.2.802.1.1.19.1.4
               ieee8021SrpReservationsTable 1.3.111.2.802.1.1.19.1.4.1 no-access
A table containing Stream attribute registrations per port.
                   ieee8021SrpReservationsEntry 1.3.111.2.802.1.1.19.1.4.1.1 no-access
A list of objects containing Stream attribute registrations per port. Rows in the table are automatically created for Streams registered on any port of a Bridge.
                       ieee8021SrpReservationStreamId 1.3.111.2.802.1.1.19.1.4.1.1.1 ieee8021srpstreamidvalue no-access
The Stream ID associated with the row of the table. Rows in the table are automatically created when Streams are registered via MSRP.
                       ieee8021SrpReservationDirection 1.3.111.2.802.1.1.19.1.4.1.1.2 ieee8021srpreservationdirectionvalue no-access
The source of this Stream registration, either Talker or Listener.
                       ieee8021SrpReservationDeclarationType 1.3.111.2.802.1.1.19.1.4.1.1.3 ieee8021srpreservationdeclarationtypevalue read-only
The type of Talker or Listener registration.
                       ieee8021SrpReservationAccumulatedLatency 1.3.111.2.802.1.1.19.1.4.1.1.4 unsigned32 read-only
The Accumulated Latency associated with the current registration. For Talker registrations this represents the accumulated latency from the Talker to the ingress port of this Bridge. For Listener registrations this represents the accumulated latency to the ingress port of the neighbor Bridge or end stations. This include the latency of the media attached to this egress port.
                       ieee8021SrpReservationFailureBridgeId 1.3.111.2.802.1.1.19.1.4.1.1.5 bridgeid read-only
The first Bridge that changes a Talker Advertise to a Talker Failed registration will report its Bridge Identification in this field. That single Bridge Identification is then propagated from Bridge to Bridge.
                       ieee8021SrpReservationFailureCode 1.3.111.2.802.1.1.19.1.4.1.1.6 ieee8021srpreservationfailurecodevalue read-only
The first Bridge that changes a Talker Advertise to a Talker Failed registration will report the Failure Code in this field. That single Failure Code is then propagated from Bridge to Bridge.
                       ieee8021SrpReservationDroppedStreamFrames 1.3.111.2.802.1.1.19.1.4.1.1.7 counter64 read-only
A count of the number of data stream frames that have been dropped for whatever reason. These are not MSRP frames, but the stream data frames that are carried by the MSRP Reservation. Discontinuities in the value of the counter can occur at re-initialization of the management system, and at other times as indicated by the value of ifCounterDiscontinuityTime object of the associated interface (if any).
                       ieee8021SrpReservationStreamAge 1.3.111.2.802.1.1.19.1.4.1.1.8 unsigned32 read-only
The number of seconds since the reservation was established on this port.
       ieee8021SrpConformance 1.3.111.2.802.1.1.19.2
           ieee8021SrpCompliances 1.3.111.2.802.1.1.19.2.1
               ieee8021SrpCompliance 1.3.111.2.802.1.1.19.2.1.1
The compliance statement for devices supporting Stream Reservation Protocol. Support of the objects defined in the IEEE8021-SRP MIB also requires support of the IEEE8021-BRIDGE-MIB; the provisions of 17.3.2 apply to implementations claiming support of the IEEE8021-SRP MIB.
           ieee8021SrpGroups 1.3.111.2.802.1.1.19.2.2
               ieee8021SrpConfigurationGroup 1.3.111.2.802.1.1.19.2.2.1
Objects that define configuration of SRP.
               ieee8021SrpLatencyGroup 1.3.111.2.802.1.1.19.2.2.2
Objects that define latency for SRP.
               ieee8021SrpStreamsGroup 1.3.111.2.802.1.1.19.2.2.3
Objects that define Streams for SRP.
               ieee8021SrpReservationsGroup 1.3.111.2.802.1.1.19.2.2.4
Objects that define Stream Reservations for SRP.