IDKT-F2-MIB: View SNMP OID List / Download MIB

VENDOR: DKT


 Home MIB: IDKT-F2-MIB
Download as:   
SNMPv2-CONF, DKT-MIB, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 f2MIB 1.3.6.1.4.1.27304.15
DKT 797xx series MIB.
       f2SwitchEngine 1.3.6.1.4.1.27304.15.1
           f2IGMPSnooping 1.3.6.1.4.1.27304.15.1.1 integer read-write
Starts/stops IGMP snooping, input parameter 0 = stops IGMP snooping, 1 = starts IGMP snooping. Per Default IGMP snooping is disabled.
           f2MTU 1.3.6.1.4.1.27304.15.1.2 integer read-write
Set and get MTU. The following values are valid: 3072, 4096, 6144, 8960 (3k, 4k, 6k and 8960 bytes)
           f2FWDTable 1.3.6.1.4.1.27304.15.1.3 no-access
Get learned MAC addresses from LAN side of switch engine
               f2FWDMacAddressEntry 1.3.6.1.4.1.27304.15.1.3.1 no-access
Learned MAC address from LAN side of switch engine
                   f2FWDMacAddress 1.3.6.1.4.1.27304.15.1.3.1.1 macaddress read-only
MAC address from LAN
       f2Ports 1.3.6.1.4.1.27304.15.2
           f2CPUPort 1.3.6.1.4.1.27304.15.2.1
               f2CPUPortAutoNegotiation 1.3.6.1.4.1.27304.15.2.1.1 integer read-only
Displays auto negotiation state for the port.
               f2CPUPortSpeedMode 1.3.6.1.4.1.27304.15.2.1.2 octet string read-only
Displays the speed and duplex mode on the port.
               f2CPUPortLinkStatus 1.3.6.1.4.1.27304.15.2.1.3 integer read-only
Displays the Link status for the port
               f2CPUPortFlowControl 1.3.6.1.4.1.27304.15.2.1.4 integer read-only
Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control
               f2CPUPortEnable 1.3.6.1.4.1.27304.15.2.1.5 integer read-only
Status for CPU port. Always 1 for enabled.
           f2WANPort 1.3.6.1.4.1.27304.15.2.2
               f2WANPortAutoNegotiation 1.3.6.1.4.1.27304.15.2.2.1 integer read-only
Displays auto negotiation state for the port.
               f2WANPortSpeedMode 1.3.6.1.4.1.27304.15.2.2.2 octet string read-only
Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)
               f2WANPortLinkStatus 1.3.6.1.4.1.27304.15.2.2.3 integer read-only
Displays the Link status for the port
               f2WANPortFlowControl 1.3.6.1.4.1.27304.15.2.2.4 integer read-only
Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control
               f2WANPortEnable 1.3.6.1.4.1.27304.15.2.2.5 integer read-only
Status for WAN port. Always 1 for enabled.
           f2LAN1Port 1.3.6.1.4.1.27304.15.2.3
               f2LAN1PortAutoNegotiation 1.3.6.1.4.1.27304.15.2.3.1 integer read-only
Displays auto negotiation state for the port.
               f2LAN1PortSpeedMode 1.3.6.1.4.1.27304.15.2.3.2 octet string read-only
Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)
               f2LAN1PortLinkStatus 1.3.6.1.4.1.27304.15.2.3.3 integer read-only
Displays the Link status for the port
               f2LAN1PortFlowControl 1.3.6.1.4.1.27304.15.2.3.4 integer read-only
Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control
               f2LAN1PortEnable 1.3.6.1.4.1.27304.15.2.3.5 integer read-write
Enables/Disables LAN1 port. Set to 1 for Enabled set to 0 for Disabled.
           f2LAN2Port 1.3.6.1.4.1.27304.15.2.4
               f2LAN2PortAutoNegotiation 1.3.6.1.4.1.27304.15.2.4.1 integer read-only
Displays auto negotiation state for the port.
               f2LAN2PortSpeedMode 1.3.6.1.4.1.27304.15.2.4.2 octet string read-only
Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)
               f2LAN2PortLinkStatus 1.3.6.1.4.1.27304.15.2.4.3 integer read-only
Displays the Link status for the port
               f2LAN2PortFlowControl 1.3.6.1.4.1.27304.15.2.4.4 integer read-only
Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control
               f2LAN2PortEnable 1.3.6.1.4.1.27304.15.2.4.5 integer read-write
Enables/Disables LAN2 port. Set to 1 for Enabled set to 0 for Disabled.
           f2LAN3Port 1.3.6.1.4.1.27304.15.2.5
               f2LAN3PortAutoNegotiation 1.3.6.1.4.1.27304.15.2.5.1 integer read-only
Displays auto negotiation state for the port.
               f2LAN3PortSpeedMode 1.3.6.1.4.1.27304.15.2.5.2 octet string read-only
Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)
               f2LAN3PortLinkStatus 1.3.6.1.4.1.27304.15.2.5.3 integer read-only
Displays the Link status for the port
               f2LAN3PortFlowControl 1.3.6.1.4.1.27304.15.2.5.4 integer read-only
Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control
               f2LAN3PortEnable 1.3.6.1.4.1.27304.15.2.5.5 integer read-write
Enables/Disables LAN3 port. Set to 1 for Enabled set to 0 for Disabled.
           f2LAN4Port 1.3.6.1.4.1.27304.15.2.6
               f2LAN4PortAutoNegotiation 1.3.6.1.4.1.27304.15.2.6.1 integer read-only
Displays auto negotiation state for the port.
               f2LAN4PortSpeedMode 1.3.6.1.4.1.27304.15.2.6.2 octet string read-only
Displays the speed and duplex mode on the port. Valid values are (1000FD|1000HD|100FD|100HD)
               f2LAN4PortLinkStatus 1.3.6.1.4.1.27304.15.2.6.3 integer read-only
Displays the Link status for the port
               f2LAN4PortFlowControl 1.3.6.1.4.1.27304.15.2.6.4 integer read-only
Displays flow control status for the port. Values: 0: No flow control, 1: Rx flow control, 2: Tx flow control, 3: Rx and Tx flow control
               f2LAN4PortEnable 1.3.6.1.4.1.27304.15.2.6.5 integer read-write
Enables/Disables LAN4 port. Set to 1 for Enabled set to 0 for Disabled.
       f2ModuleGroup 1.3.6.1.4.1.27304.15.3
The objects are related to the DKT 797xx series module, MIB rev 09.