Hub-facs-prvt: View SNMP OID List / Download MIB

VENDOR: FIBRONICS


 Home MIB: Hub-facs-prvt
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 private 1.3.6.1.4
     enterprises 1.3.6.1.4.1
         fibronics 1.3.6.1.4.1.22
               trap 1.3.6.1.4.1.22.3
                   traprun 1.3.6.1.4.1.22.3.1
                       rTrapAddrTbl 1.3.6.1.4.1.22.3.1.1 no-access
Table of managers to which traps must be sent. Up to 10 entries in table
                           rTrapAddrEntry 1.3.6.1.4.1.22.3.1.1.1 read-only
                               rTrapAddrAddr 1.3.6.1.4.1.22.3.1.1.1.1 ipaddress read-write
IP address of entity requesting event notification
                               rTrapAddrComm 1.3.6.1.4.1.22.3.1.1.1.2 octet string read-write
Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
                               rTrapAddrVer 1.3.6.1.4.1.22.3.1.1.1.3 integer read-write
Version number supported by destination node
                               rTrapAddrType 1.3.6.1.4.1.22.3.1.1.1.4 octet string read-write
Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - Enterprise Traps other than fmDiagGenericTrap
                               rTrapAddrState 1.3.6.1.4.1.22.3.1.1.1.5 integer read-write
Determines status of this entry Enumeration: 'active': 1, 'inactive': 2.
                               rTrapAddrFlag 1.3.6.1.4.1.22.3.1.1.1.6 integer read-write
If the entry is fixed, it can not be deleted because of aging Enumeration: 'fixed': 0, 'removable': 1.
                               rTrapAddrAge 1.3.6.1.4.1.22.3.1.1.1.7 integer read-only
Aging time of the entry (in sec)
                       rTrapLearning 1.3.6.1.4.1.22.3.1.2 integer read-only
Learn the addresses of the managers automatically. Enumeration: 'enable': 1, 'disable': 0.
                       rTrapAging 1.3.6.1.4.1.22.3.1.3 integer read-only
Time in sec. until we erase a trap entry
                   traperm 1.3.6.1.4.1.22.3.2
                       pTrapAddrTbl 1.3.6.1.4.1.22.3.2.1 no-access
Table of managers to which traps must be sent. Up to 10 entries in table
                           pTrapAddrEntry 1.3.6.1.4.1.22.3.2.1.1 read-write
                               pTrapAddrAddr 1.3.6.1.4.1.22.3.2.1.1.1 ipaddress read-write
IP address of entity requesting event notification
                               pTrapAddrComm 1.3.6.1.4.1.22.3.2.1.1.2 octet string read-write
Community name the receiving entity will expect. When reading the instance of this object the value has no meaning.
                               pTrapAddrVer 1.3.6.1.4.1.22.3.2.1.1.3 integer read-write
Version number supported by destination node
                               pTrapAddrType 1.3.6.1.4.1.22.3.2.1.1.4 octet string read-write
Type of event that should be reported to this address, bit 0 - authentication trap bit 1 - other SNMP traps bit 2 - Error Traps bit 3 - Diagnostic Traps bit 4 - Debug Traps bit 5 - all Enterprise Traps other than fmDiagGenericTrap
                               pTrapAddrState 1.3.6.1.4.1.22.3.2.1.1.5 integer read-write
Determines status of this entry Enumeration: 'active': 1, 'inactive': 2.
                       pTrapLearning 1.3.6.1.4.1.22.3.2.2 integer read-write
Learn the addresses of the managers automatically. Enumeration: 'enable': 1, 'disable': 0.
                       pTrapAging 1.3.6.1.4.1.22.3.2.3 integer read-write
Time in sec. until we erase a trap entry
                   trapvar 1.3.6.1.4.1.22.3.3
               fm800 1.3.6.1.4.1.22.51
                     fmsystem 1.3.6.1.4.1.22.51.1
                         fmsystemrun 1.3.6.1.4.1.22.51.1.1
                             fmSystemReset 1.3.6.1.4.1.22.51.1.1.4 integer read-write
Resetting the CARD. When reading the instance of this object the value has no meaning. cold reset is performed with selftest , while warm start is performed without selftest Enumeration: 'meaning-less-value': 127, 'cold-reset': 0, 'power-up': 2, 'warm-reset': 1.
                             fmSystemSelfTestLevel 1.3.6.1.4.1.22.51.1.1.5 integer read-write
Type of self test to be executed upon cold-reset Enumeration: 'none': 0, 'full': 2, 'partial': 1, 'extended': 3.
                             fmSystemIpAddr 1.3.6.1.4.1.22.51.1.1.7 ipaddress read-only
IP address of the agent
                             fmSystemIPNetMask 1.3.6.1.4.1.22.51.1.1.8 ipaddress read-only
IP Network Mask
                             fmSystemIPDefGway 1.3.6.1.4.1.22.51.1.1.9 ipaddress read-only
Default Gateway Address
                             fmSystemFileServer 1.3.6.1.4.1.22.51.1.1.10 ipaddress read-write
IP address to which a TFTP for boot is sent.
                             fmSystemBootFile 1.3.6.1.4.1.22.51.1.1.11 octet string read-only
Path and file name that is sent as a TFTP request
                             fmSystemDownLoad 1.3.6.1.4.1.22.51.1.1.13 integer read-write
Downloading the EDB. When reading the instance of this object the value has no meaning. Enumeration: 'download': 1, 'meaning-less-value': 127.
                             fmSystemSlipIpAddr 1.3.6.1.4.1.22.51.1.1.14 ipaddress read-only
SLIP IP address. This is object is available only when slip interface exist
                             fmSystemSlipIPNetMask 1.3.6.1.4.1.22.51.1.1.15 ipaddress read-only
SLIP IP Network Mask This is object is available only when slip interface exist
                             fmSystemSlipBaudRate 1.3.6.1.4.1.22.51.1.1.16 integer read-only
SLIP Baud rate This is object is available only when slip interface exist Enumeration: 'baud1200': 0, 'baud19200': 4, 'baud2400': 1, 'baud4800': 2, 'baud9600': 3, 'baud38400': 5.
                             fmSystemSlipParity 1.3.6.1.4.1.22.51.1.1.17 integer read-only
SLIP Parity This is object is available only when slip interface exist Enumeration: 'even': 2, 'none': 0, 'odd': 1.
                             fmSystemSlipStopBits 1.3.6.1.4.1.22.51.1.1.18 integer read-only
SLIP Stop Bits This is object is available only when slip interface exist Enumeration: 'two': 1, 'one': 0.
                             fmSystemLastSourceIpAddr 1.3.6.1.4.1.22.51.1.1.20 ipaddress read-only
The source IP address, extracted from the last IP message
                             fmSystemLastDestinationIpAddr 1.3.6.1.4.1.22.51.1.1.21 ipaddress read-only
The destination IP address in the the last IP message. It may be either fmSystemIpAddr or fmSystemSlipIpAddr
                         fmsystemperm 1.3.6.1.4.1.22.51.1.2
                             pfmSystemIpAddr 1.3.6.1.4.1.22.51.1.2.7 ipaddress read-write
IP address of the agent
                             pfmSystemIPNetMask 1.3.6.1.4.1.22.51.1.2.8 ipaddress read-write
IP Network Mask
                             pfmSystemIPDefGway 1.3.6.1.4.1.22.51.1.2.9 ipaddress read-write
Default Gateway Address
                             pfmSystemFileServer 1.3.6.1.4.1.22.51.1.2.10 ipaddress read-write
IP address to which a TFTP for boot is sent.
                             pfmSystemBootFile 1.3.6.1.4.1.22.51.1.2.11 octet string read-write
Path and file name that is sent as a TFTP request
                             pfmSystemReadCommunity 1.3.6.1.4.1.22.51.1.2.13 octet string read-write
Community string for reading When reading the instance of this object the value has no meaning.
                             pfmSystemWriteCommunity 1.3.6.1.4.1.22.51.1.2.14 octet string read-write
Community string for writing When reading the instance of this object the value has no meaning.
                             pfmSystemSlipIpAddr 1.3.6.1.4.1.22.51.1.2.15 ipaddress read-write
SLIP IP address This is object is available only when slip interface exist
                             pfmSystemSlipIPNetMask 1.3.6.1.4.1.22.51.1.2.16 ipaddress read-write
SLIP IP Network Mask This is object is available only when slip interface exist
                             pfmSystemSlipBaudRate 1.3.6.1.4.1.22.51.1.2.17 integer read-write
SLIP Baud rate This is object is available only when slip interface exist Enumeration: 'baud1200': 0, 'baud19200': 4, 'baud2400': 1, 'baud4800': 2, 'baud9600': 3, 'baud38400': 5.
                             pfmSystemSlipParity 1.3.6.1.4.1.22.51.1.2.18 integer read-write
SLIP Parity This is object is available only when slip interface exist Enumeration: 'even': 2, 'none': 0, 'odd': 1.
                             pfmSystemSlipStopBits 1.3.6.1.4.1.22.51.1.2.19 integer read-write
SLIP Stop Bits This is object is available only when slip interface exist Enumeration: 'two': 1, 'one': 0.
                     fmdiag 1.3.6.1.4.1.22.51.5
                         fmDiagTrapInfo 1.3.6.1.4.1.22.51.5.2 displaystring read-only
Used for generic traps. The first word is the trap code. The rest of the string is the extra information. Contains CR and LF char.
                         fmDiagFaultTable 1.3.6.1.4.1.22.51.5.3 no-access
Table of fault reports from the agent
                             fmDiagFaultEntry 1.3.6.1.4.1.22.51.5.3.1 no-access
                                 fmDiagFaultIndex 1.3.6.1.4.1.22.51.5.3.1.1 integer read-only
The fault index in the fault table
                                 fmDiagFaultReport 1.3.6.1.4.1.22.51.5.3.1.2 displaystring read-only
Get the faults detected by the agent
                         fmDiagDebug 1.3.6.1.4.1.22.51.5.4 integer read-write
This object is for factory use only. Users must not write into this variable or improper operation can occur. Enumeration: 'normal-mode': 1, 'debug-mode': 2.
                         fmDiagDeleteFaults 1.3.6.1.4.1.22.51.5.5 integer read-write
setting this object to delete(2) causes the fault table in the e2 and it's ram image to be initialized, setting the object to no-delete(1) does not effect the fault table. when reading the object the value no-delete(1) will always be returned Enumeration: 'no-delete': 1, 'delete': 2.
                     fmdebug 1.3.6.1.4.1.22.51.6
                         fmDebugReadMem 1.3.6.1.4.1.22.51.6.1 octet string read-only
Reads the bytes from the memory
                         fmDebugReadEeprom 1.3.6.1.4.1.22.51.6.2 octet string read-only
Reads bytes from Eeprom
                       fmDiagGenericTrap 1.3.6.1.4.1.22.510.30
Generic Trap information
                       fmDiagDownloadTrap 1.3.6.1.4.1.22.510.31
This trap is send before starting downloading