HWMUSA-SHDSL-CPE-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HWMUSA-SHDSL-CPE-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 musa 1.3.6.1.4.1.2011.2.6
     ias 1.3.6.1.4.1.2011.2.6.7
         hwIasService 1.3.6.1.4.1.2011.2.6.7.4
             hwMusaShdsl 1.3.6.1.4.1.2011.2.6.7.4.4
                 hwShdslCPE 1.3.6.1.4.1.2011.2.6.7.4.4.2
                     hwShdslCPECommon 1.3.6.1.4.1.2011.2.6.7.4.4.2.1
                         umCommonInventoryTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1 no-access
A table containing common inventory information.
                             umCommonInventoryEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1 no-access
An entry in umCommonInventoryTable.
                                 umCommonInventoryModel 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.1 integer read-only
This variable indicates the model number.
                                 umCommonInventorySwVer 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.2 displaystring read-only
This variable indicates the software version. format: a.bcd (a, b, c, d: 0 ~ 9)
                                 umCommonInventoryHwVer 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.3 displaystring read-only
This variable indicates the hardware version. format: a.bcd (a, b, c, d: 0 ~ 9)
                                 umCommonInventoryDevName 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.1.1.4 displaystring read-write
This variable indicates the device name.
                         umCommonConfigTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2 no-access
A table containing common config information.
                             umCommonConfigEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1 no-access
An entry in umCommonConfigTable.
                                 umCommonConfigDate 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1.1 displaystring read-write
This variable is used to define date information of the device. The format is MM/DD/YYYY. MM means month, DD is day, and YYYY stands for year. The range is from 01/01/1990 to 12/31/2100.
                                 umCommonConfigTime 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.2.1.2 displaystring read-write
This variable is used to define time information of the device. The format is HH:MM:SS. HH means hour, MM is to indicate minute and SS is for second.
                         umCommonActionTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3 no-access
A table containing actions to CPE.
                             umCommonActionEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1 no-access
An entry in umCommonActionTable.
                                 umCommonActionDbSave 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1.1 integer read-write
This variable is to initiate the VCDB command. 1: save Enumeration: 'save': 1.
                                 umCommonActionWarmStart 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.3.1.2 integer read-write
This value is to restart the device. TRUE (1): warm start Enumeration: 'restart': 1.
                         umCommonSnmpConfigTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4 no-access
A table containing SNMP configuration information.
                             umCommonSnmpConfigEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1 no-access
An entry in umCommonSnmpConfigTable.
                                 umCommonSnmpConfigIpAddress 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.1 ipaddress read-only
This variable is to indicate IP address of the device.
                                 umCommonSnmpConfigIpSubnetMask 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.2 ipaddress read-only
This variable is to define the subnet mask of the IP address of the device.
                                 umCommonSnmpConfigIpGatewayIp 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.3 ipaddress read-only
This variable is to define the gateway IP address of the device.
                                 umCommonSnmpConfigTrapIpAddress1 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.4 ipaddress read-only
This variable is to define the IP address where the manager receives trap.
                                 umCommonSnmpConfigTrapIpPortNum1 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.5 integer read-only
This variable is to define the UDP port number where the manager receives trap. The possible values are: 162 (default) 62000 62001 62002
                                 umCommonSnmpConfigTrapIpAddress2 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.6 ipaddress read-only
This variable is to define the IP address where the manager receives trap.
                                 umCommonSnmpConfigTrapIpPortNum2 1.3.6.1.4.1.2011.2.6.7.4.4.2.1.4.1.7 integer read-only
This variable is to define the UDP port number where the manager receives trap. The possible values are: 162 (default) 62000 62001 62002
                     hwShdslCPESdsl 1.3.6.1.4.1.2011.2.6.7.4.4.2.2
                         umSdslConfigTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1 no-access
A table containing Sdsl configuration information.
                             umSdslConfigEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1 no-access
An entry in umSdslConfigTable.
                                 umSdslConfigNEType 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.1 integer read-only
This variable is to set this STU-C or STU-R configuration. (0): STU-C (LT mode) (1): STU-R (NT mode)
                                 umSdslConfigRateAdaptive 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.2 integer read-write
This variable is to enable/disable the rate adaptive configuration. (0): Fixed (1): Adaptive
                                 umSdslConfigDataRate 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.3 integer read-only
This variable is to set data rate (N*64k) of Sdsl. If Rate Adaptive is TRUE, the value is invalid till Rate Adaptive is FALSE.
                                 umSdslResetPerformance 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.4 integer read-write
This value is to reset performance register. 1: reset all current performance data 2: reset current ES 3: reset current SES 4: reset current UAS 5: reset all history performance data 6: reset history ES 7: reset history SES 8: reset history UAS
                                 umSdslTimeElapsed 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.5 integer read-only
The number of seconds that have elapsed since the beginning of the current error-measurement period.
                                 umSdslValidIntervals 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.1.1.6 integer read-only
The number of previous intervals for which valid data was collected. The value will be 96 unless the interface was brought on-line within the last 24 hours, in which case the value will be the number of complete 15 minute intervals the since interface has been online.
                         umSdslThresholdTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2 no-access
A table containing MSDSL configuration information.
                             umSdslThresholdEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1 no-access
An entry in umSdslThresholdTable.
                                 umSdslThreshold15mES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.1 gauge32 read-write
This variable defines the 15-minute threshold of ES.
                                 umSdslThreshold15mSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.2 gauge32 read-write
This variable defines the 15-minute threshold of SES.
                                 umSdslThreshold15mUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.3 gauge32 read-write
This variable defines the 15-minute threshold of UAS.
                                 umSdslThreshold24hES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.4 gauge32 read-write
This variable defines the 24-hour threshold of ES.
                                 umSdslThreshold24hSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.5 gauge32 read-write
This variable defines the 24-hour threshold of SES.
                                 umSdslThreshold24hUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.6 gauge32 read-write
This variable defines the 24-hour threshold of UAS.
                                 umSdslThresholdSNRMargin 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.7 gauge32 read-write
This variable indicates the SNR margin threshold of the Sdsl line. 1~15: valid value
                                 umSdslThresholdLoopAttenuation 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.2.1.8 gauge32 read-write
This variable indicates the Loop Attenuation threshold of the Sdsl line. 1~127:
                         umSdslPmCurrentTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3 no-access
The Sdsl PM Current table.
                             umSdslPmCurrentEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1 no-access
An entry in the Sdsl Pm Current table.
                                 umSdslPmCurrentES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.1 gauge32 read-only
The number of Errored Seconds encountered by an Sdsl during the current interval.
                                 umSdslPmCurrentSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.2 gauge32 read-only
The number of Severely Errored Seconds encountered by an Sdsl during the current interval.
                                 umSdslPmCurrentUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.3.1.3 gauge32 read-only
The number of Unavailable Seconds encountered by an Sdsl during the current interval.
                         umSdslPmIntervalTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4 no-access
The Sdsl Interval table.
                             umSdslPmIntervalEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1 no-access
An entry in the Sdsl Interval table.
                                 umSdslPmIntervalIndex 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.1 integer no-access
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval.
                                 umSdslPmIntervalES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.2 gauge32 read-only
The number of Errored Seconds encountered by an Sdsl in one interval.
                                 umSdslPmIntervalSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.3 gauge32 read-only
The number of Severely Errored Seconds encountered by an Sdsl in one interval.
                                 umSdslPmIntervalUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.4.1.4 gauge32 read-only
The number of Unavailable Seconds encountered by an Sdsl in one interval.
                         umSdslPmCurrentDayTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5 no-access
The Sdsl PM Current Day table. (0:00AM ~ the last completed quarter)
                             umSdslPmCurrentDayEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1 no-access
An entry in the Sdsl Pm Current Day table.
                                 umSdslPmCurrentDayES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.1 gauge32 read-only
The number of Errored Seconds encountered by an Sdsl during the Current Day.
                                 umSdslPmCurrentDaySES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.2 gauge32 read-only
The number of Severely Errored Seconds encountered by an Sdsl during the Current Day.
                                 umSdslPmCurrentDayUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.5.1.3 gauge32 read-only
The number of Unavailable Seconds encountered by an Sdsl during the Current Day.
                         umSdslPmDayTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6 no-access
The SDSL Pm Day table.
                             umSdslPmDayEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1 no-access
An entry in the Sdsl Pm Day table.
                                 umSdslPmDayIndex 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.1 integer no-access
A number between 1 and 7, where 1 is the most recently completed day and 7 is the least recently completed day.
                                 umSdslPmDayES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.2 gauge32 read-only
The number of Errored Seconds encountered by an Sdsl in one day.
                                 umSdslPmDaySES 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.3 gauge32 read-only
The number of Severely Errored Seconds encountered by an Sdsl in one day.
                                 umSdslPmDayUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.6.1.4 gauge32 read-only
The number of Unavailable Seconds encountered by an Sdsl in one day.
                         umSdslTestTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7 no-access
A table containing SHDSL testing function.
                             umSdslTestEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1 no-access
An entry in umSdslTestTable.
                                 umSdslTestLoopback 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.1 integer read-write
This value is to set loopback. 0: Release 2: Loopback toward Network
                                 umSdslTestPattern 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.2 integer read-write
This variable is used to set test pattern. 1: 511 2: 2047 3: PRBS Support Eoc Version 1.02 (23/04/2002)
                                 umSdslTestPeriod 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.3 integer read-write
This variable is used to get/set test period in second. A value of 0 means non-stop testing.
                                 umSdslTestStart 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.4 truthvalue read-write
This value is to start or stop testing(only local). TRUE (1): Start FALSE (2): Stop
                                 umSdslTestInsertOneBitError 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.5 truthvalue read-write
This variable is used to initiate pause test pattern. This is used in error insertion application. (1) Insert error rate(rate= 10E-1)
                                 umSdslTestElapsedTime 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.6 integer read-only
This variable is to indicate elapsed time of testing in second.
                                 umSdslTestErrCount 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.7 displaystring read-only
This variable is to indicate error count of testing.
                                 umSdslTestErrRate 1.3.6.1.4.1.2011.2.6.7.4.4.2.2.7.1.8 displaystring read-only
This variable is to indicate error rate of testing, which is 'a.bcx10E(-d)', a, b, c: 0..9, d: 1..9.
                     hwShdslCPEV35 1.3.6.1.4.1.2011.2.6.7.4.4.2.3
                         umSdslV35ConfigTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1 no-access
The config table contains Ne config items.
                             umSdslV35ConfigEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1 no-access
An entry in the config table
                                 umSdslV35ConfigCurrentDataRate 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.1 integer read-only
This variable is to get current data rate (N*64k) of Sdsl V35.
                                 umSdslV35ConfigCurrentTimingSrc 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.2 integer read-only
This variable is to get the current timing source of the system. 0: internal 1: from loop (SDSL) 2: from DTE (V.35)
                                 umSdslV35ConfigTimingSrc 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.1.1.3 integer read-write
This variable is to get/set the setted timing source of the system. 0: internal 1: from loop (SDSL) 2: from DTE (V.35)
                         umSdslV35DTETable 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2 no-access
The alarm table contains DTE.
                             umSdslV35DTEEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1 no-access
An entry in the alarm table
                                 umSdslV35DTEStatus 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.1 integer read-only
The variable represents which port reports the DTE Status. (bit) 0 : RTS 1 : CTS 2 : DCD 3 : DSR
                                 umSdslV35DTERTS 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.2 integer read-write
The variable represents which port reports the RTS Config Status. 0 : RTS from DTE 1 : RTS Permanent On
                                 umSdslV35TailFunc 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.2.1.3 integer read-write
The variable represents tail function switch. 0 : Tail off 1 : Tail on
                         umSdslV35LoopbackTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3 no-access
The V35 Loopback Table.
                             umSdslV35LoopbackEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3.1 no-access
An entry in the Sdsl Testing table.
                                 umSdslV35Loopback 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.3.1.1 integer read-write
This value is to set loopback. 0: Release 1: Toward DTE Loop 2: Toward Network Loop 3: Initial in-band Loop (V.54)
                         umSdslV35AlarmTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4 no-access
The alarm table contains alarm event history.
                             umSdslV35AlarmEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1 no-access
An entry in the alarm table
                                 umSdslV35ClearAlarmHistory 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1.1 truthvalue read-write
The variable initiate the clear alarm history action(Set 1).
                                 umSdslV35AlarmStatus 1.3.6.1.4.1.2011.2.6.7.4.4.2.3.4.1.2 integer read-only
The variable initiate the current alarm status. (bit) bit0: Loss of SDSL synchronization word (LOSW) bit1: (SDSL) ES exceed day threshold bit2: (SDSL) ES exceed quarter threshold bit3: (SDSL) SES exceed day threshold bit4: (SDSL) SES exceed quarter threshold bit5: (SDSL) UAS exceed day threshold bit6: (SDSL) UAS exceed quarter threshold bit7: (SDSL) SNR exceed threshold bit8: (SDSL) Loop Attuattion exceed threshold bit9~31: Reserved DataType = 72
                     hwCPET1E1 1.3.6.1.4.1.2011.2.6.7.4.4.2.4
                         umLiuTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1 no-access
The LIU table. The LIU attributes regarding configuration and performance are defined in RFC1406.
                             umLiuEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1 no-access
An entry in the LIU table.
                                 umLiuE1Transparent 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.1 integer read-write
This value gets/sets the E1 Transparency. Disable(0), Enable (1)
                                 umLiuLineDrive 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.2 integer read-write
This variable is to define the value of line drive. 75_Ohm(0), 120_Ohm(1) Enumeration: 'drive-75-Ohm': 0, 'drive-120-Ohm': 1.
                                 umLiuIdleCodeword 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.3 integer read-write
This variable represents the value of idle code word. But the write-operation is preserved for future use. If you take write-operation, will be returned.
                                 umLiuE1SlotMap 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.4 integer read-write
This table defines the corresponding customer equipment interface for each time slot of network interface. Each bit represents one time slot. '1' stands for occupied. The leftmost bit represents time slot 31, and rightmost bit represents time slot 0.
                                 umLiuResetPerformance 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.1.1.5 integer read-write
This value is to reset performance register for this port. 1: reset all current performance data 2: reset current LCV 3: reset current PCV 4: reset current ES 5: reset current SES 6: reset current SEFS 7: reset current UAS 8: reset current CSS 9: reset current DM 10: reset current CS 11: reset current FBE 51: reset all history performance data 52: reset history LCV 53: reset history PCV 54: reset history ES 55: reset history SES 56: reset history SEFS 57: reset history UAS 58: reset history CSS 59: reset history DM 60: reset history CS 61: reset history FBE
                         umLiuTestTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2 no-access
The LIU table. The LIU attributes regarding configuration and performance are defined in RFC1406.
                             umLiuTestEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1 no-access
An entry in the LIU Test table.
                                 umLiuLoopbackConfig 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.1 integer read-write
This value is to set LIU loopback. 0: release 1: payload loopback 2: line loopback 3: local loopback Enumeration: 'release': 0, 'payload-loopback': 1, 'local-loopback': 3, 'line-loopback': 2.
                                 umLiuLoopbackStatus 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.2 integer read-only
This value is to indicate the LIU loopback status. 0: released 1: payload loopback 2: line loopback 3: local loopback Enumeration: 'release': 0, 'payload-loopback': 1, 'local-loopback': 3, 'line-loopback': 2.
                                 umLiuTestPattern 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.3 integer read-write
This variable is used to set test pattern. 1: 2E15-1_PRBS 3: 2047 Enumeration: 'pattern-2E15-1-PRBS': 1, 'pattern-2047': 3.
                                 umLiuTestPeriod 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.4 integer read-write
This variable is used to set test period in second. A value of 0 means non-stop testing.
                                 umLiuTestStart 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.5 truthvalue read-write
This value is to start or stop testing. 1: Start 2: Stop
                                 umLiuInsertedErrorRate 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.6 integer read-write
This value is used to set inserted error rate. Inserted error rate = 1*10E(-n), where n is the set value. Set 0 to stop insertting errors.
                                 umLiuElapsedTime 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.7 integer read-only
This variable is to indicate elapsed time of testing.
                                 umLiuTestErrCount 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.8 displaystring read-only
This variable is to indicate error count of testing.
                                 umLiuTestErrRate 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.2.1.9 displaystring read-only
This variable is to indicate error rate of testing, which is 'a.bcx10E(-d)', a, b, c: 0..9, d: 1..9.
                         umLiuThresholdTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3 no-access
The Performance threshold table.
                             umLiuThresholdEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1 no-access
An entry in Performance threshold table.
                                 umLiuThreshold15mLCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.1 gauge32 read-write
This variable defines the threshold of LCV. This variable is valid for near end UM.
                                 umLiuThreshold15mPCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.2 gauge32 read-write
This variable defines the threshold of PCV.
                                 umLiuThreshold15mES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.3 gauge32 read-write
This variable defines the threshold of ES.
                                 umLiuThreshold15mSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.4 gauge32 read-write
This variable defines the threshold of SES.
                                 umLiuThreshold15mSEFS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.5 gauge32 read-write
This variable defines the threshold of SEFS.
                                 umLiuThreshold15mUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.6 gauge32 read-write
This variable defines the threshold of UAS.
                                 umLiuThreshold15mCSS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.7 gauge32 read-write
This variable defines the threshold of CSS.
                                 umLiuThreshold15mDM 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.8 gauge32 read-write
This variable defines the threshold of DM.
                                 umLiuThreshold24hLCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.9 gauge32 read-write
This variable defines the threshold of LCV. This variable is valid for near end UM.
                                 umLiuThreshold24hPCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.10 gauge32 read-write
This variable defines the threshold of PCV.
                                 umLiuThreshold24hES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.11 gauge32 read-write
This variable defines the threshold of ES.
                                 umLiuThreshold24hSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.12 gauge32 read-write
This variable defines the threshold of SES.
                                 umLiuThreshold24hSEFS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.13 gauge32 read-write
This variable defines the threshold of SEFS.
                                 umLiuThreshold24hUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.14 gauge32 read-write
This variable defines the threshold of UAS.
                                 umLiuThreshold24hCSS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.15 gauge32 read-write
This variable defines the threshold of CSS.
                                 umLiuThreshold24hDM 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.3.1.16 gauge32 read-write
This variable defines the threshold of DM.
                         umLiuPmData 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4
                             umLiuPmCurrent15mTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1 no-access
The Liu PM Current table.
                                 umLiuPmCurrent15mEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1 no-access
An entry in the Liu Pm Current 15 minutes table.
                                     umLiuPmCurrent15mLCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.1 gauge32 read-only
The number of Line Code Violations encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mPCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.2 gauge32 read-only
The number of Path Coding Violations encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.3 gauge32 read-only
The number of Errored Seconds encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.4 gauge32 read-only
The number of Severely Errored Seconds encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mSEFS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.5 gauge32 read-only
The number of Severely Errored Framing Seconds encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.6 gauge32 read-only
The number of Unavailable Seconds encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mCSS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.7 gauge32 read-only
The number of Controlled Slip Seconds encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mDM 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.8 gauge32 read-only
The number of Degraded Minutes encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mCS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.9 gauge32 read-only
The number of Controlled Slip encountered by an LIU interface in the current quarter.
                                     umLiuPmCurrent15mFBE 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.1.1.10 gauge32 read-only
The number of Loss Of Frame encountered by an LIU interface in current quarter.
                             umLiuPm15mTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2 no-access
The Liu PM 15 minutes Interval table.
                                 umLiuPm15mEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1 no-access
An entry in the Liu Pm Interval table.
                                     umLiuPm15mIndex 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.1 integer no-access
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the least recently completed 15 minutes interval (assuming that all 96 intervals are valid).
                                     umLiuPm15mLCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.2 gauge32 read-only
The number of Line Code Violations encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mPCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.3 gauge32 read-only
The number of Path Coding Violations encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.4 gauge32 read-only
The number of Errored Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mSES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.5 gauge32 read-only
The number of Severely Errored Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mSEFS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.6 gauge32 read-only
The number of Severely Errored Framing Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.7 gauge32 read-only
The number of Unavailable Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mCSS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.8 gauge32 read-only
The number of Controlled Slip Seconds encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mDM 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.9 gauge32 read-only
The number of Degraded Minutes encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mCS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.10 gauge32 read-only
The number of Controlled Slip encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                                     umLiuPm15mFBE 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.2.1.11 gauge32 read-only
The number of Loss Of Frame encountered by a LIU interface in one of the previous 96, individual 15 minute, intervals.
                             umLiuPmCurrentDayTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3 no-access
The Liu PM Current Day table.
                                 umLiuPmCurrentDayEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1 no-access
An entry in the Liu Pm Current Day table.
                                     umLiuPmCurrentDayLCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.1 gauge32 read-only
The number of Line Code Violations encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayPCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.2 gauge32 read-only
The number of Path Coding Violations encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.3 gauge32 read-only
The number of Errored Seconds encountered by an LIU interface in current day.
                                     umLiuPmCurrentDaySES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.4 gauge32 read-only
The number of Severely Errored Seconds encountered by an LIU interface in current day.
                                     umLiuPmCurrentDaySEFS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.5 gauge32 read-only
The number of Severely Errored Framing Seconds encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.6 gauge32 read-only
The number of Unavailable Seconds encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayCSS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.7 gauge32 read-only
The number of Controlled Slip Seconds encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayDM 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.8 gauge32 read-only
The number of Degraded Minutes encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayCS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.9 gauge32 read-only
The number of Controlled Slip encountered by an LIU interface in current day.
                                     umLiuPmCurrentDayFBE 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.3.1.10 gauge32 read-only
The number of Loss Of Frame encountered by an LIU interface in current day.
                             umLiuPmDayTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4 no-access
The Liu PM Day table.
                                 umLiuPmDayEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1 no-access
An entry in the Liu Pm Day table.
                                     umLiuPmDayIndex 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.1 integer no-access
A number between 1 and 7, where 1 is PM data of the most recently completed day and 7 is PM data of the least completed recently day.
                                     umLiuPmDayLCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.2 gauge32 read-only
The number of Line Code Violations encountered by an LIU interface in one day.
                                     umLiuPmDayPCV 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.3 gauge32 read-only
The number of Path Coding Violations encountered by an LIU interface in one day.
                                     umLiuPmDayES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.4 gauge32 read-only
The number of Errored Seconds encountered by an LIU interface in one day.
                                     umLiuPmDaySES 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.5 gauge32 read-only
The number of Severely Errored Seconds encountered by an LIU interface in one day.
                                     umLiuPmDaySEFS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.6 gauge32 read-only
The number of Severely Errored Framing Seconds encountered by an LIU interface in one day.
                                     umLiuPmDayUAS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.7 gauge32 read-only
The number of Unavailable Seconds encountered by an LIU interface in one day.
                                     umLiuPmDayCSS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.8 gauge32 read-only
The number of Controlled Slip Seconds encountered by an LIU interface in one day.
                                     umLiuPmDayDM 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.9 gauge32 read-only
The number of Degraded Minutes encountered by an LIU interface in one day.
                                     umLiuPmDayCS 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.10 gauge32 read-only
The number of Controlled Slip encountered by an LIU interface in one day.
                                     umLiuPmDayFBE 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.4.4.1.11 gauge32 read-only
The number of Loss Of Frame by an LIU interface in one day.
                         umSdslE1T1AlarmTable 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5 no-access
The SDSL E1T1 alarm table.
                             umSdslE1T1AlarmEntry 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1 no-access
An entry in the SDSL alarm table.
                                 umSdslE1T1ClearAlarmHistory 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.1 truthvalue read-write
The variable initiate the clear alarm history action(Set 1).
                                 umSdslE1T1LocalAlarmStatus 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.2 unsigned32 read-only
The variable initiate the local current alarm status. (bit) 0: (E1T1) E1 LOS Failure (Loss of signal) 1: (E1T1) Loss of Frame Alignment 2: (E1T1) Loss of E1T1 Multiframe Alignment 3: (E1T1) AIS received 4: (E1T1) AIS received in TS16 5: (E1T1) RAI received 6: (E1T1) RAI received in TS16 7: (E1T1) Bit errors exceed error ratio 8: (E1T1) LCV exceed day threshold 9: (E1T1) LCV exceed quarter threshold 10: (E1T1) PCV exceed day threshold 11: (E1T1) PCV exceed quarter threshold 12: (E1T1) ES exceed day threshold 13: (E1T1) ES exceed quarter threshold 14: (E1T1) SES exceed day threshold 15: (E1T1) SES exceed quarter threshold 16: (E1T1) SEFS exceed day threshold 17: (E1T1) SEFS exceed quarter threshold 18: (E1T1) UAS exceed day threshold 19: (E1T1) UAS exceed quarter threshold 20: (E1T1) CSS exceed day threshold 21: (E1T1) CSS exceed quarter threshold 22: (E1T1) DM exceed day threshold 23: (E1T1) DM exceed quarter threshold 24~31 Reserved DataType 103
                                 umSdslE1T1SdslAlarmStatus 1.3.6.1.4.1.2011.2.6.7.4.4.2.4.5.1.3 unsigned32 read-only
The variable initiate the E1T1 SHDSL current alarm status. (bit) 0: (SDSL) LOSW Failure (Loss of SDSL synchronization word) 1: (SDSL) ES exceed day threshold 2: (SDSL) ES exceed quarter threshold 3: (SDSL) SES exceed day threshold 4: (SDSL) SES exceed quarter threshold 5: (SDSL) UAS exceed day threshold 6: (SDSL) UAS exceed quarter threshold 7: (SDSL) SNR exceed threshold 8: (SDSL) Loop Attuattion exceed threshold 9~31 Reserved DataType 103