HUAWEI-WLAN-AP-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
| Home | MIB: HUAWEI-WLAN-AP-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| hwWlanAp | 1.3.6.1.4.1.2011.6.139.13 |
V1.73, update the value of hwApPowerInsufficientTrap, hwApPowerInsufficientResumeTrap, hwWlanAPPoeWorkmode, hwWlanAPPoeWorkmode, hwWlanIDIndexedAPPoeWorkmode, hwWlanIDIndexedAPPoeExpectedWorkmode |
||
| hwWlanApTrapInfo | 1.3.6.1.4.1.2011.6.139.13.1 | |||
| hwWlanApTrap | 1.3.6.1.4.1.2011.6.139.13.1.1 | |||
| hwApFaultTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.1 |
The object indicates an AP communication fault alarm. |
||
| hwApNormalTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.2 |
This object indicates an AP communication fault clear alarm. |
||
| hwApPingResultTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.3 |
This object indicates an AP ping result alarm. |
||
| hwApConfigCommitTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.4 |
This object indicates that the configuration of an AP is successfully committed. |
||
| hwUnAuthorizedApRecordExistTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.5 |
This object indicates that unauthorized AP alarms exist. |
||
| hwUnAuthorizedApRecordClearTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.6 |
This object indicates that unauthorized AP alarms are cleared. |
||
| hwApCpuOverloadTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.7 |
This object indicates that the CPU usage of an AP exceeds the upper threshold. |
||
| hwApCpuOverloadRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.8 |
This object indicates that an AP's CPU usage restores to the allowed range. |
||
| hwApMemoryOverloadTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.9 |
This object indicates that the memory usage of an AP exceeds the upper threshold. |
||
| hwApMemoryOverloadRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.10 |
This object indicates that the memory usage of an AP restores to the allowed range. |
||
| hwApStaFullTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.11 |
This object indicates that new STAs cannot associate with an AP. |
||
| hwApStaFullRecoverTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.12 |
This object indicates that new STAs can associate with an AP. |
||
| hwAcDevicesSwitchTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.13 |
This object that an active/standby AC switchover occurs. |
||
| hwDyingGaspTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.14 |
This object indicates a dying gasp alarm. |
||
| hwApFaultTrapFat | 1.3.6.1.4.1.2011.6.139.13.1.1.15 |
Description. |
||
| hwApNormalTrapFat | 1.3.6.1.4.1.2011.6.139.13.1.1.16 |
Description. |
||
| hwApTemperatureTooLowTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.17 |
This object indicates that the temperature is too low. |
||
| hwApTemperatureTooLowRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.18 |
This object indicates that the temperature restores to the normal range. |
||
| hwApTemperatureTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.19 |
This object indicates that the temperature is too high. |
||
| hwApTemperatureTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.20 |
This object indicates that the temperature restores to the normal range. |
||
| hwApOpticalRxPowerTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.21 |
This object indicates that the receive power of an AP's optical module is too high. |
||
| hwApOpticalRxPowerTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.22 |
This object indicates that the receive power of an AP's optical module restores to the normal range. |
||
| hwApOpticalRxPowerTooLowTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.23 |
This object indicates that the receive power of an AP's optical module is too low. |
||
| hwApOpticalRxPowerTooLowRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.24 |
This object indicates that the receive power of an AP's optical module restores to the normal range. |
||
| hwApOpticalTemperatureTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.25 |
This object indicates that the temperature of an AP's optical module is too high. |
||
| hwApOpticalTemperatureTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.26 |
This object indicates that the temperature of an AP's optical module restores to the normal range. |
||
| hwApOpticalTemperatureTooLowTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.27 |
This object indicates that the temperature of an AP's optical module is too low. |
||
| hwApOpticalTemperatureTooLowRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.28 |
This object indicates that the temperature of an AP's optical module restores to the normal range. |
||
| hwApNotSupportCountryCodeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.29 |
This object indicates that the country code is not supported. |
||
| hwApColdBootTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.30 |
This object indicates a cold restart alarm. |
||
| hwApColdBootRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.31 |
This object indicates a cold restart clear alarm. |
||
| hwApHotBootTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.32 |
This object indicates a hot restart alarm. |
||
| hwApHotBootRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.33 |
This object indicates a hot restart clear alarm. |
||
| hwApCRCTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.34 |
This object indicates a CRC error alarm. |
||
| hwApCRCTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.35 |
This object indicates that CRC error alarms are cleared. |
||
| hwApConflictApNameTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.36 |
This object indicates an alarm of AP name conflict. |
||
| hwApLicenseTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.37 |
This object indicates an AP license resource exhaustion alarm. |
||
| hwApFmeaIICFaultTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.38 |
This object indicates an FMEA IIC fault alarm. |
||
| hwApFmeaIICFaultRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.39 |
This object indicates that the FMEA IIC fault alarm is cleared. |
||
| hwApFmeaPHYFaultTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.40 |
This object indicates an FMEA PHY fault alarm. |
||
| hwApFmeaPHYFaultRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.41 |
This object indicates that the FMEA PHY fault alarm is cleared. |
||
| hwApFmeaFaultTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.42 |
This object indicates an FMEA fault alarm. |
||
| hwApFmeaFaultRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.43 |
This object indicates that the FMEA fault alarm is cleared. |
||
| hwApOpticalInsertTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.44 |
This object indicates an alarm that is generated when an optical module is installed. |
||
| hwApOpticalRemoveTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.45 |
This object indicates an alarm generated due to installation of an optical module is cleared. |
||
| hwApReceivedInvalidArpNewTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.46 |
This object indicates that invalid ARP packets are received. |
||
| hwApVersionMismatchTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.47 |
This object indicates that the AP version and the AC version do not match. |
||
| hwRadioUploadRemoteCaptureFileTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.48 |
This object indicates the alarm on the remote capture result upload result. |
||
| hwMPJoinedOnEthernetTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.49 |
This object indicates the alarm when an MP goes online through an Ethernet interface. |
||
| hwMPJoinedOnEthernetRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.50 |
This object indicates the alarm when an MP that went online through an Ethernet interface goes online through an air interface. |
||
| hwMPPJoinedOnAirTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.51 |
This object indicates the alarm when an MPP changes to an MP and goes online through an air interface. |
||
| hwMPPJoinedOnAirRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.52 |
This object indicates the alarm when an MPP that went online through an air interface goes online through an Ethernet interface. |
||
| hwApOpticalTxPowerTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.53 |
This object indicates an alarm for high transmit power of the AP's optical module. |
||
| hwApOpticalTxPowerTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.54 |
This object indicates a clear alarm for transmit power recovery of the AP's optical module. |
||
| hwApOpticalTxPowerTooLowTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.55 |
This object indicates an alarm for low transmit power of the AP's optical module. |
||
| hwApOpticalTxPowerTooLowRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.56 |
This object indicates a clear alarm for transmit power recovery of the AP's optical module. |
||
| hwApOnLineNumExceedCardSpecTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.57 |
This object indicates the number of online APs on the card has exceeded the maximum value. |
||
| hwApFanInvalidTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.58 |
This object indicates a complete failure of a fan. |
||
| hwApFanInvalidRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.59 |
This object indicates that the complete failure of a fan has been rectified. |
||
| hwApStorageDevRemoveTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.60 |
This object indicates that the storage card is removed. |
||
| hwApStorageDevInsertTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.61 |
This object indicates that the storage card is installed. |
||
| hwApPoePowerOffTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.62 |
This object indicates that a port is powered off. |
||
| hwApPoePowerOnTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.63 |
This object indicates that a port is powered on. |
||
| hwApPoePdConnectedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.64 |
This object indicates that a port detects a PD connected to it. |
||
| hwApPoePdDisconnectedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.65 |
This object indicates that a port detects disconnection of the attached PD. |
||
| hwApPoePdClassOvercurrentTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.66 |
This object indicates that a port detects a PD whose current exceeds the threshold of the corresponding class. |
||
| hwApPoePdPriorityDifferentTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.67 |
This object indicates that the priority configured on a port is different from the PD priority. |
||
| hwApPoePowerOverUtilizationThresholdTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.68 |
This object indicates that the load power of a PoE slot exceeds the upper limit. |
||
| hwApPoePowerOverUtilizationThresholdRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.69 |
This object indicates that the load power of a PoE slot has fallen below the upper limit. |
||
| hwApSTPAutoShutdownTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.70 |
This object indicates that STP detected a loop and shut down the port based on configuration. |
||
| hwApSTPAutoShutdownRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.71 |
This object indicates that the shutdown port has recovered. |
||
| hwApOpticalInvalidTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.72 |
This object indicates that the optical transceiver does not work normally. |
||
| hwApOpticalInvalidRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.73 |
This object indicates that the optical transceiver has restored. |
||
| hwApVapStaFullTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.74 |
This object indicates that new STAs cannot associate with an VAP. |
||
| hwVapStaFullRecoverTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.75 |
This object indicates that new STAs can associate with an VAP. |
||
| hwWlanBLELowPowerTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.76 |
This object indicates that the battery power of a BLE device is lower than the specified low power alarm threshold. |
||
| hwWlanBLELowPowerRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.77 |
This object indicates that the low power alarm of a BLE device has been cleared. |
||
| hwWlanBLEOfflineTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.78 |
This object indicates that a BLE device gets offline. |
||
| hwWlanBLEOfflineRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.79 |
This object indicates that an offline alarm of a BLE device has been cleared. |
||
| hwWlanBLEFaultyTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.80 |
This object indicates that an AP's built-in Bluetooth module is faulty. |
||
| hwWlanBLEFaultyRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.81 |
This object indicates that the fault on an AP's built-in Bluetooth module fault alarm is cleared. |
||
| hwAPIoTCardInsertTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.82 |
This object indicates that an IoT card is inserted. |
||
| hwAPIoTCardRemoveTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.83 |
This object indicates that an IoT card is removed. |
||
| hwAPIoTServerStartFailTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.84 |
This object indicates that the server module on an AP for receiving data from the IoT card fails to start. |
||
| hwAPIoTServerStartFailResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.85 |
This object indicates that the server used by the IoT card is successfully recovered. |
||
| hwWlanApSubFirmwareMismatchTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.86 |
This object indicates the mismatch alarm for the sub-firmware version on the AP. |
||
| hwApSpecificConfigChangedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.87 |
Description. |
||
| hwApConfigInconsistWithActualTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.88 |
This alarm is generated when a the AP config is inconsistent with the actual attribute. |
||
| hwWlanBLEDetachedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.89 |
This object indicates an alarm showing that a Bluetooth tag is detached. |
||
| hwWlanBLEDetachedRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.90 |
This object indicates an alarm showing that a Bluetooth tag is re-attached. |
||
| hwWlanCableSnrNormalTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.91 |
This alarm is generated when the AP's current network cable quality is good. |
||
| hwWlanCableSnrAbnormalTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.92 |
This alarm is generated when the AP's current network cable quality is poor, causing packet loss risks. |
||
| hwWlanCableSnrDetectNotSupportTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.93 |
This alarm is generated when the AP's port is Down, resulting in a failure to detect the network cable quality. |
||
| hwApPowerInsufficientTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.94 |
This alarm is generated when the AP power supply is insufficient. |
||
| hwApPowerInsufficientResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.95 |
This alarm is generated when the AP power supply insufficient resume. |
||
| hwPortVlanSecureMacTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.96 |
This alarm is generated when the AP's port receive illegal MAC. |
||
| hwApMcBcPktNumExceedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.97 |
This alarm is generated when the AP broadcast and multicast packets over threshold. |
||
| hwApMcBcPktNumExceedRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.98 |
This alarm is generated when the AP broadcast and multicast packets over threshold restore. |
||
| hwApTypeMismatchTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.99 |
This object indicates that the AP version and the AC version do not match. |
||
| hwApSoftGreDownTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.100 |
This alarm is generated when the softgre tunnel down. |
||
| hwApSoftGreDownTrapRestore | 1.3.6.1.4.1.2011.6.139.13.1.1.101 |
This alarm is generated when the softgre tunnel up. |
||
| hwApVersionNotRecommendedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.102 |
The AP version is not recommended for the current AC. |
||
| hwApVersionNotRecommendedTrapRestore | 1.3.6.1.4.1.2011.6.139.13.1.1.103 |
AP-version-not-recommended alarm restore |
||
| hwApDiskOverloadTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.104 |
The Disk usage of an AP exceeds the upper threshold. |
||
| hwApDiskOverloadRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.105 |
The Disk usage of an AP restores to the allowed range. |
||
| hwApPowerLimitedTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.106 |
This alarm is generated when the AP works in Limited mode due to insufficient power supply. |
||
| hwApPowerLimitedResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.107 |
This alarm is generated when the AP resumes from the Limited mode. |
||
| hwAPIPConflictTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.108 |
The IP address of the AP conflicts with that of the gateway or another AP. |
||
| hwApNumReachMaxTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.109 |
This alarm is generated when the number of online APs reaches the maximum specifications. |
||
| hwApNumReachMaxResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.110 |
This alarm is generated when the number of online APs is less than the maximum specifications. |
||
| hwApNumReachWarningTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.111 |
The number of online APs reaches 80% of the maximum specifications. |
||
| hwApNumReachWarningResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.112 |
The number of online APs is less than 80% of the maximum specifications. |
||
| hwAPIotCardConnectServerTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.113 |
This alarm is generated when an IOT card of the AP is connected to the server. |
||
| hwAPIotCardDisconnectServerTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.114 |
This alarm is generated when an IOT card of the AP is disconnected from the server. |
||
| hwAPIotCardTypeMatchTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.115 |
This alarm is generated when an IOT card of the AP is match with configuration. |
||
| hwAPIotCardTypeMismatchTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.116 |
This alarm is generated when an IOT card of the AP is mismatch with configuration. |
||
| hwAPFanRemoveTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.117 |
This alarm is generated when the fan of the AP is removed. |
||
| hwAPFanInsertTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.118 |
This alarm is generated when the fan of the AP is inserted. |
||
| hwAPPowerRemoveTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.119 |
This alarm is generated when the power of the AP is removed. |
||
| hwAPPowerInsertTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.120 |
This alarm is generated when the power of the AP is inserted. |
||
| hwAPPowerFailTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.121 |
This alarm is generated when the power of the AP is faulty. |
||
| hwAPPowerFailResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.122 |
This alarm is generated when the power of the AP resume from failure. |
||
| hwAPPowerInvalidTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.123 |
This alarm is generated when the AP power is invalid for some reason. |
||
| hwAPPowerInvalidResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.124 |
This alarm is generated when the AP power resume from invalid situation. |
||
| hwApExistNeedReconnectTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.125 |
This alarm is generated when some APs need to be reconnected. |
||
| hwApExistNeedReconnectResumeTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.126 |
This alarm is generated when no AP needs to be reconnected. |
||
| hwApOpticalVoltageTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.127 |
This object indicates that the Voltage of an AP's optical module is too High. |
||
| hwApOpticalVoltageTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.128 |
This object indicates that the Voltage of an AP's optical module restores to the normal range. |
||
| hwApOpticalVoltageTooLowTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.129 |
This object indicates that the Voltage of an AP's optical module is too low. |
||
| hwApOpticalVoltageTooLowRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.130 |
This object indicates that the Voltage of an AP's optical module restores to the normal range. |
||
| hwApOpticalCurrentTooHighTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.131 |
This object indicates that the Current of an AP's optical module is too high. |
||
| hwApOpticalCurrentTooHighRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.132 |
This object indicates that the Current of an AP's optical module restores to the normal range. |
||
| hwApOpticalCurrentTooLowTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.133 |
This object indicates that Current of an AP's optical module is too low. |
||
| hwApOpticalCurrentTooLowRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.134 |
This object indicates that the Current of an AP's optical module restores to the normal range. |
||
| hwApLoopbackDetectTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.135 |
This object indicates that the wired port detected a loop and blocked itself. |
||
| hwApLoopbackDetectRestoreTrap | 1.3.6.1.4.1.2011.6.139.13.1.1.136 |
This object indicates that the blocked port has recovered. |
||
| hwWlanApTrapObjects | 1.3.6.1.4.1.2011.6.139.13.1.2 | |||
| hwWlanApActualType | 1.3.6.1.4.1.2011.6.139.13.1.2.1 | octet string | read-only |
AP type. |
| hwWlanApCpuOccupancyRate | 1.3.6.1.4.1.2011.6.139.13.1.2.2 | integer32 | read-only |
AP CPU usage. |
| hwWlanApMemoryOccupancyRate | 1.3.6.1.4.1.2011.6.139.13.1.2.3 | integer32 | read-only |
AP memory usage. |
| hwWlanApPermitStaNum | 1.3.6.1.4.1.2011.6.139.13.1.2.4 | integer32 | read-only |
The number of STAs allowed to associate with an AP. |
| hwWlanStaAuthFailCause | 1.3.6.1.4.1.2011.6.139.13.1.2.5 | integer32 | read-only |
The cause of the STA authentication failure. |
| hwWlanAcSystemSwitchType | 1.3.6.1.4.1.2011.6.139.13.1.2.6 | integer32 | read-only |
The active/standby switchover type. |
| hwWlanApOpticalRxPower | 1.3.6.1.4.1.2011.6.139.13.1.2.7 | integer32 | read-only |
Receive power of an AP's optical module. |
| hwWlanApOpticalTemperature | 1.3.6.1.4.1.2011.6.139.13.1.2.8 | integer32 | read-only |
The temperature of an AP's optical module. |
| hwWlanApCfgCountryCode | 1.3.6.1.4.1.2011.6.139.13.1.2.9 | octet string | read-only |
Country code. |
| hwWlanApArpAttackSrcMac | 1.3.6.1.4.1.2011.6.139.13.1.2.10 | macaddress | read-only |
Description. |
| hwWlanApArpAttackDstMac | 1.3.6.1.4.1.2011.6.139.13.1.2.11 | macaddress | read-only |
Description. |
| hwWlanApArpAttackSrcIP | 1.3.6.1.4.1.2011.6.139.13.1.2.12 | ipaddress | read-only |
Description. |
| hwWlanApArpCfgRateThreshold | 1.3.6.1.4.1.2011.6.139.13.1.2.13 | integer32 | read-only |
Description. |
| hwWlanApArpActualRate | 1.3.6.1.4.1.2011.6.139.13.1.2.14 | integer32 | read-only |
Description. |
| hwWlanApNotifyRadioId | 1.3.6.1.4.1.2011.6.139.13.1.2.15 | integer32 | read-only |
Radio ID used to report alarms. |
| hwWlanApNotifyOrRestoreTemperature | 1.3.6.1.4.1.2011.6.139.13.1.2.16 | integer32 | read-only |
AP temperature. |
| hwWlanOccurTime | 1.3.6.1.4.1.2011.6.139.13.1.2.17 | octet string | read-only |
Occurrence time. |
| hwWlanApBootNotifyName | 1.3.6.1.4.1.2011.6.139.13.1.2.18 | octet string | read-only |
AP restart alarm name. |
| hwWlanApFaultTimes | 1.3.6.1.4.1.2011.6.139.13.1.2.19 | integer32 | read-only |
The number of AP failures. |
| hwWlanApUnAuthorizedApRecordNumber | 1.3.6.1.4.1.2011.6.139.13.1.2.20 | integer32 | read-only |
This object indicates that unauthorized AP alarms exist. |
| hwWlanCrcErrActual | 1.3.6.1.4.1.2011.6.139.13.1.2.21 | unsigned32 | read-only |
CRC error alarm threshold value.The unit is 1/10000. |
| hwWlanCrcThreshold | 1.3.6.1.4.1.2011.6.139.13.1.2.22 | unsigned32 | read-only |
Description. |
| hwWlanApNotifyWlanId | 1.3.6.1.4.1.2011.6.139.13.1.2.23 | integer32 | read-only |
WLAN ID used to report alarms. |
| hwWlanApLicenseInfo | 1.3.6.1.4.1.2011.6.139.13.1.2.24 | octet string | read-only |
License information of APs. |
| hwWlanCrcPortType | 1.3.6.1.4.1.2011.6.139.13.1.2.25 | octet string | read-only |
CRC port type. |
| hwWlanCrcPortID | 1.3.6.1.4.1.2011.6.139.13.1.2.26 | integer32 | read-only |
CRC port number. |
| hwWlanApArpAttackDropNum | 1.3.6.1.4.1.2011.6.139.13.1.2.27 | integer32 | read-only |
The number of packets discarded due to ARP attacks. |
| hwWlanApFaultID | 1.3.6.1.4.1.2011.6.139.13.1.2.28 | integer32 | read-only |
This object indicates an FMEA fault alarm. |
| hwWlanApIfIndex | 1.3.6.1.4.1.2011.6.139.13.1.2.29 | integer32 | read-only |
AP interface index. |
| hwWlanApFaultInfo | 1.3.6.1.4.1.2011.6.139.13.1.2.30 | octet string | read-only |
AP fault description. |
| hwWlanApSoftWareVersion | 1.3.6.1.4.1.2011.6.139.13.1.2.31 | octet string | read-only |
AP software version. |
| hwRadioUploadRemoteCaptureResult | 1.3.6.1.4.1.2011.6.139.13.1.2.32 | octet string | read-only |
Remote capture result. |
| hwWlanApRadioID | 1.3.6.1.4.1.2011.6.139.13.1.2.33 | integer32 | read-only |
Radio ID. |
| hwWlanApCpuOverloadDescInfo | 1.3.6.1.4.1.2011.6.139.13.1.2.34 | octet string | read-only |
The high AP CPU usage. |
| hwWlanApOpticalTxPower | 1.3.6.1.4.1.2011.6.139.13.1.2.35 | integer32 | read-only |
Transmit power of the AP's optical module. |
| hwWlanSlotNum | 1.3.6.1.4.1.2011.6.139.13.1.2.36 | octet string | read-only |
Description. |
| hwApPoePdPriority | 1.3.6.1.4.1.2011.6.139.13.1.2.37 | integer | no-access |
This object identifies the PD priority.The default value is low. Enumeration: 'high': 2, 'critical': 1, 'low': 3. |
| hwApPoePortPriority | 1.3.6.1.4.1.2011.6.139.13.1.2.38 | integer | no-access |
This object identifies the priority of an interface.The default value is low. Enumeration: 'high': 2, 'critical': 1, 'low': 3. |
| hwApPoeCurConsumPower | 1.3.6.1.4.1.2011.6.139.13.1.2.39 | integer32 | no-access |
This object identifies the current consuming power. |
| hwApPoeConsumPowerThreshold | 1.3.6.1.4.1.2011.6.139.13.1.2.40 | integer32 | no-access |
This object identifies the threshold of consuming power. |
| hwApFanIndex | 1.3.6.1.4.1.2011.6.139.13.1.2.41 | integer32 | no-access |
This object identifies the id of fan. |
| hwApEntityPhysicalName | 1.3.6.1.4.1.2011.6.139.13.1.2.42 | octet string | no-access |
This object identifies the phisical name of entity name. |
| hwApStorageIndex | 1.3.6.1.4.1.2011.6.139.13.1.2.43 | integer32 | no-access |
This object identifies the id of Storage. |
| hwApStorageName | 1.3.6.1.4.1.2011.6.139.13.1.2.44 | octet string | no-access |
This object identifies the name of Storage. |
| hwWlanApOpticalFaultID | 1.3.6.1.4.1.2011.6.139.13.1.2.45 | integer32 | no-access |
This object identifies the error corde of the optical transceiver fault. |
| hwWlanApWlanID | 1.3.6.1.4.1.2011.6.139.13.1.2.46 | macaddress | read-only |
This object identifies the Wlan Id of the Vap that has the max number of stations. |
| hwWlanBLEMacAddr | 1.3.6.1.4.1.2011.6.139.13.1.2.47 | macaddress | read-only |
MAC address of a BLE device. |
| hwWlanApUdp | 1.3.6.1.4.1.2011.6.139.13.1.2.48 | integer32 | no-access |
UDP port number. |
| hwSubFirmwareName | 1.3.6.1.4.1.2011.6.139.13.1.2.49 | octet string | no-access |
AP's sub-firmware name. |
| hwSubFirmware | 1.3.6.1.4.1.2011.6.139.13.1.2.50 | integer32 | no-access |
AP's sub-firmware number. |
| hwRealVersion | 1.3.6.1.4.1.2011.6.139.13.1.2.51 | octet string | no-access |
Actual version of the AP's sub-firmware. |
| hwExpectVersion | 1.3.6.1.4.1.2011.6.139.13.1.2.52 | octet string | no-access |
Expected version of the AP's sub-firmware. |
| hwWlanApIotCardId | 1.3.6.1.4.1.2011.6.139.13.1.2.53 | integer32 | no-access |
Number of the slot on an AP where an IoT card is installed. |
| hwPowerOffReason | 1.3.6.1.4.1.2011.6.139.13.1.2.54 | octet string | no-access |
This object identifies the reason of power off. |
| hwApSpecificChangeConfig | 1.3.6.1.4.1.2011.6.139.13.1.2.55 | octet string | no-access |
This object identifies the config of change. |
| hwApSpecificChangeReason | 1.3.6.1.4.1.2011.6.139.13.1.2.56 | octet string | no-access |
This object identifies the reason of change config. |
| hwApInconsisitConfig | 1.3.6.1.4.1.2011.6.139.13.1.2.57 | octet string | no-access |
This object identifies the inconsistent config. |
| hwApConfigInconsisitReason | 1.3.6.1.4.1.2011.6.139.13.1.2.58 | octet string | no-access |
This object identifies the reason of inconsistent config. |
| hwApPowerWorkMode | 1.3.6.1.4.1.2011.6.139.13.1.2.59 | octet string | no-access |
This object identifies the current power work mode of AP. |
| hwApExpectPowerWorkMode | 1.3.6.1.4.1.2011.6.139.13.1.2.60 | octet string | no-access |
This object identifies the expect power work mode of AP. |
| hwWlanIllegalMac | 1.3.6.1.4.1.2011.6.139.13.1.2.61 | macaddress | no-access |
This object identifies the illegal mac. |
| hwApVlanId | 1.3.6.1.4.1.2011.6.139.13.1.2.62 | integer32 | no-access |
This object identifies the vlan id. |
| hwWlanApIfName | 1.3.6.1.4.1.2011.6.139.13.1.2.63 | octet string | no-access |
This object identifies the IfName. |
| hwWlanApConfigType | 1.3.6.1.4.1.2011.6.139.13.1.2.64 | octet string | no-access |
This object identifies the type of ap config. |
| hwAPDiskThresholdWarning | 1.3.6.1.4.1.2011.6.139.13.1.2.65 | integer32 | read-only |
The Disk usage threshold of an AP. |
| hwAPDiskThresholdCurrent | 1.3.6.1.4.1.2011.6.139.13.1.2.66 | integer32 | read-only |
The current Disk usage of an AP. |
| hwAPConflictIPAddress | 1.3.6.1.4.1.2011.6.139.13.1.2.67 | octet string | read-only |
The IP address of the ap conflicts with that of the gateway or another AP. |
| hwAPMaxNum | 1.3.6.1.4.1.2011.6.139.13.1.2.68 | integer32 | read-only |
The maximum specifications of APs. |
| hwWlanApIotCardType | 1.3.6.1.4.1.2011.6.139.13.1.2.69 | octet string | no-access |
This object indicates the IOT card type. |
| hwApPowerId | 1.3.6.1.4.1.2011.6.139.13.1.2.70 | integer32 | read-only |
This object indicates the power ID of the AP. |
| hwApPowerFaultId | 1.3.6.1.4.1.2011.6.139.13.1.2.71 | integer32 | read-only |
This object indicates the AP power fault ID. |
| hwApPowerFaultReason | 1.3.6.1.4.1.2011.6.139.13.1.2.72 | octet string | no-access |
This object indicates the AP power fault reason. |
| hwWlanApTemperatureType | 1.3.6.1.4.1.2011.6.139.13.1.2.73 | octet string | no-access |
This object indicates the AP temperature type. |
| hwWlanApOpticalVoltage | 1.3.6.1.4.1.2011.6.139.13.1.2.74 | integer32 | read-only |
Voltage of an AP's optical module. |
| hwWlanApOpticalCurrent | 1.3.6.1.4.1.2011.6.139.13.1.2.75 | integer32 | read-only |
Current of an AP's optical module. |
| hwWlanApPowerInsufficientImpact | 1.3.6.1.4.1.2011.6.139.13.1.2.76 | octet string | no-access |
This object indicates the impact of AP power insufficient. |
| hwWlanApTypeObjects | 1.3.6.1.4.1.2011.6.139.13.2 | |||
| hwWlanApTypeTable | 1.3.6.1.4.1.2011.6.139.13.2.1 | no-access |
This table is used to query attributes based on AP types and restart APs based on AP types. |
|
| 1.3.6.1.4.1.2011.6.139.13.2.1.1 | no-access |
The index of this table is hwWlanApType. |
||
| hwWlanApType | 1.3.6.1.4.1.2011.6.139.13.2.1.1.1 | octet string | read-only |
This object indicates the AP type name. It is the index of the table. |
| hwWlanApTypeDesc | 1.3.6.1.4.1.2011.6.139.13.2.1.1.2 | octet string | read-only |
This object indicates description of an AP type. |
| hwWlanApTypeWiredPortNum | 1.3.6.1.4.1.2011.6.139.13.2.1.1.3 | integer32 | read-only |
This object indicates the number of wired ports on APs of a certain type. |
| hwWlanApTypeRadioNum | 1.3.6.1.4.1.2011.6.139.13.2.1.1.4 | integer32 | read-only |
This object indicates the number of radios on APs of a certain type. |
| hwWlanApTypeMaxStaNum | 1.3.6.1.4.1.2011.6.139.13.2.1.1.5 | integer32 | read-only |
This object indicates the maximum number of access STAs on an AP of a certain type. |
| hwWlanApTypeReset | 1.3.6.1.4.1.2011.6.139.13.2.1.1.6 | integer32 | read-write |
This object indicates that APs are restarted based on the AP type. |
| hwWlanApTypeExternalAntenna | 1.3.6.1.4.1.2011.6.139.13.2.1.1.7 | integer | read-only |
This object indicates the attribute of support external antenna on an AP of a certain type. Enumeration: 'support': 2, 'notSupport': 1. |
| hwWlanApTypeID | 1.3.6.1.4.1.2011.6.139.13.2.1.1.8 | integer32 | read-write |
AP type ID. |
| hwWlanApTypeOperate | 1.3.6.1.4.1.2011.6.139.13.2.1.1.9 | integer | read-write |
This object indicates the row status. Enumeration: 'add': 1, 'delete': 2. |
| hwWlanApTypeConfigurationMethod | 1.3.6.1.4.1.2011.6.139.13.2.1.1.10 | octet string | read-only |
AP type configuration method. |
| hwWlanApTypeAutoCreateMethod | 1.3.6.1.4.1.2011.6.139.13.2.1.1.11 | integer | read-write |
Automatic AP type generation method. Enumeration: 'createall': 3, 'createbyid': 1, 'createbytype': 2. |
| hwWlanApTypeRadioTable | 1.3.6.1.4.1.2011.6.139.13.2.2 | no-access |
This table is used to query radio-related attributes of APs of a certain type. |
|
| 1.3.6.1.4.1.2011.6.139.13.2.2.1 | no-access |
The indexes of this table are hwWlanApType and hwWlanApTypeRadioIndex. |
||
| hwWlanApTypeRadioIndex | 1.3.6.1.4.1.2011.6.139.13.2.2.1.1 | integer32 | no-access |
This object indicates the radio index of APs of a certain type. |
| hwWlanApTypeRadioType | 1.3.6.1.4.1.2011.6.139.13.2.2.1.2 | integer | read-only |
This object indicates the radio type of APs of a certain type. Enumeration: 'wlan80211bgnax': 10, 'wlan80211abgn': 7, 'wlan80211ac': 8, 'wlan80211anac': 9, 'wlan80211g': 3, 'wlan80211an': 5, 'wlan80211b': 2, 'wlan80211a': 1, 'wlan80211anacax': 11, 'wlan80211ax': 12, 'wlan80211bgn': 6, 'wlan80211bg': 4. |
| hwWlanRadioMaxSpatialStreamsNum | 1.3.6.1.4.1.2011.6.139.13.2.2.1.3 | unsigned32 | read-only |
This object indicates the maximum number of spatial streams of an AP radio. |
| hwWlanApTypeRadioAntennaGain | 1.3.6.1.4.1.2011.6.139.13.2.2.1.4 | integer32 | read-only |
This object indicates that the antenna gain is configured according to the radio ID. |
| hwWlanApTypeRadioMaxVAPNum | 1.3.6.1.4.1.2011.6.139.13.2.2.1.5 | unsigned32 | read-only |
This object indicates the maximum number of VAPs that a radio supports. |
| hwWlanApTypeWiredPortTable | 1.3.6.1.4.1.2011.6.139.13.2.3 | no-access |
This table is used to query wired interface attributes of APs of a certain type. |
|
| 1.3.6.1.4.1.2011.6.139.13.2.3.1 | no-access |
The indexes of this table are hwWlanApType and hwWlanApTypeWiredPortIndex. |
||
| hwWlanApTypeWiredPortIndex | 1.3.6.1.4.1.2011.6.139.13.2.3.1.1 | integer32 | no-access |
This object indicates the index of an AP's wired interface. Numbering rule: port-index = port-type * 100 + port-number. For example, the indexes of a wall plate AP's GE0, eth0, and eth1 are 200 (2 * 100 + 0 = 200), 100 (1 * 100 + 0 = 100), and 101 (1 * 100 + 1 = 101) respectively. |
| hwWlanApTypeWiredPortType | 1.3.6.1.4.1.2011.6.139.13.2.3.1.2 | integer | read-only |
This object indicates the type of an AP's wired interface. Enumeration: 'adsl2plus': 5, 'gpon': 3, 'xge': 8, 'ethTrunk': 6, 'ge': 2, 'multige': 7, 'fe': 1, 'epon': 4. |
| hwWlanApTypeWiredPortName | 1.3.6.1.4.1.2011.6.139.13.2.3.1.3 | octet string | read-only |
This object indicates the name of a wired interface on APs of a certain type, for example, ethernet 0, ethernet 1, gigabit-ethernet 0, and eth-trunk 0. |
| hwWlanApTypeUndefinedTable | 1.3.6.1.4.1.2011.6.139.13.2.4 | no-access |
This table is used to operate the undefined AP type record reported by an AP. |
|
| 1.3.6.1.4.1.2011.6.139.13.2.4.1 | no-access |
The indexes of this table is hwWlanApTypeUndefined. |
||
| hwWlanApTypeUndefined | 1.3.6.1.4.1.2011.6.139.13.2.4.1.1 | octet string | read-only |
Name of an undefined AP type. |
| hwWlanApTypeIDUndefined | 1.3.6.1.4.1.2011.6.139.13.2.4.1.2 | integer32 | read-only |
ID of an undefined AP type. |
| hwWlanApTypeUndefinedReportApMac | 1.3.6.1.4.1.2011.6.139.13.2.4.1.3 | macaddress | read-only |
MAC address of the AP that reports an undefined AP type. |
| hwWlanApTypeUndefinedReportTime | 1.3.6.1.4.1.2011.6.139.13.2.4.1.4 | octet string | read-only |
Time when an undefined AP type is reported. |
| hwWlanApTypeUndefinedOperate | 1.3.6.1.4.1.2011.6.139.13.2.4.1.5 | integer | read-write |
This object indicates the row status.. Enumeration: 'delete': 1. |
| hwWlanApTypeAttributesAbnormalCheckTable | 1.3.6.1.4.1.2011.6.139.13.2.5 | no-access |
This table is used to query exceptions in verifying type attributes reported by an AP. |
|
| 1.3.6.1.4.1.2011.6.139.13.2.5.1 | no-access |
The indexes of this table is hwWlanApTypeAttributesAbnormalCheck. |
||
| hwWlanApTypeAttributesAbnormalCheck | 1.3.6.1.4.1.2011.6.139.13.2.5.1.1 | octet string | read-only |
This object indicates the name of an AP type whose attributes fail to be verified. |
| hwWlanApTypeIDAttributesAbnormalCheck | 1.3.6.1.4.1.2011.6.139.13.2.5.1.2 | integer32 | read-only |
This object indicates the ID of an AP type whose attributes fail to be verified. |
| hwWlanApTypeAttributesAbnormalCheckResult | 1.3.6.1.4.1.2011.6.139.13.2.5.1.3 | integer | read-only |
Abnormal check result of reporting AP type attributes. Enumeration: 'fail': 2, 'risk': 1. |
| hwWlanApTypeAttributesAbnormalCheckReason | 1.3.6.1.4.1.2011.6.139.13.2.5.1.4 | integer | read-only |
Reason for the abnormal check result of reporting AP type attributes. Enumeration: 'rangeconflict': 1, 'lostattributes': 2. |
| hwWlanApObjects | 1.3.6.1.4.1.2011.6.139.13.3 | |||
| hwWlanApPing | 1.3.6.1.4.1.2011.6.139.13.3.1 | |||
| hwWlanApPingApMac | 1.3.6.1.4.1.2011.6.139.13.3.1.1 | macaddress | read-write |
This object specifies the MAC address in an AP ping operation. If the AP ID and MAC address are specified concurrently, the AP is pinged based on the MAC address. |
| hwWlanApPingAddress | 1.3.6.1.4.1.2011.6.139.13.3.1.2 | octet string | read-write |
This object indicates the domain name or IP address of the destination host. |
| hwWlanApPingCount | 1.3.6.1.4.1.2011.6.139.13.3.1.3 | integer32 | read-write |
This object indicates the number of times ICMP ECHO-REQUEST packets are sent.Default value: 4. |
| hwWlanApPingPacketSize | 1.3.6.1.4.1.2011.6.139.13.3.1.4 | integer32 | read-write |
This object indicates the length of an ECHO-REQUE. |
| hwWlanApPingWaitTime | 1.3.6.1.4.1.2011.6.139.13.3.1.5 | integer32 | read-write |
This object indicates the time to wait before sending the next ICMP Request packet.Unit: ms Default value: 2000. |
| hwWlanApPingTimeOut | 1.3.6.1.4.1.2011.6.139.13.3.1.6 | integer32 | read-write |
This object indicates the timeout period for an ECHO-RESPONSE after an ECHO-REQUEST is sent.Unit: ms Default value: 2000. |
| hwWlanApPingResultSuccessCount | 1.3.6.1.4.1.2011.6.139.13.3.1.7 | integer32 | read-only |
This object indicates the number of successful AP ping operations. Only the result of the latest AP ping operation is kept. |
| hwWlanApPingResultFailureCount | 1.3.6.1.4.1.2011.6.139.13.3.1.8 | integer32 | read-only |
This object indicates the number of AP ping operation failures. Only the result of the latest AP ping operation is kept. |
| hwWlanApPingResultAveResponseTime | 1.3.6.1.4.1.2011.6.139.13.3.1.9 | integer32 | read-only |
This object indicates the average response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms. |
| hwWlanApPingResultMinResponseTime | 1.3.6.1.4.1.2011.6.139.13.3.1.10 | integer32 | read-only |
This object indicates the minimum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms. |
| hwWlanApPingResultMaxResponseTime | 1.3.6.1.4.1.2011.6.139.13.3.1.11 | integer32 | read-only |
This object indicates the maximum response time for an AP ping operation. Only the result of the latest AP ping operation is kept.Unit: ms. |
| hwWlanApPingResultFlag | 1.3.6.1.4.1.2011.6.139.13.3.1.12 | integer | read-only |
This object indicates the result of the AP ping operation. Enumeration: 'true': 2, 'false': 1. |
| hwWlanUnauthedApRecordTable | 1.3.6.1.4.1.2011.6.139.13.3.2 | no-access |
This table describes rogue AP records. Rogue APs are those whose MAC addresses and SNs are not in the whitelist and not confirmed after being discovered by the AC. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.2.1 | no-access |
The index of this table is hwWlanUnauthedApRecordIndex. |
||
| hwWlanUnauthedApRecordIndex | 1.3.6.1.4.1.2011.6.139.13.3.2.1.1 | integer32 | no-access |
This object indicates the index of a rogue AP record. |
| hwWlanUnauthedApType | 1.3.6.1.4.1.2011.6.139.13.3.2.1.2 | octet string | read-only |
This object indicates the type of a rogue AP. |
| hwWlanUnauthedApMacAddress | 1.3.6.1.4.1.2011.6.139.13.3.2.1.3 | macaddress | read-only |
This object indicates the type of a rogue AP. |
| hwWlanUnauthedApSn | 1.3.6.1.4.1.2011.6.139.13.3.2.1.4 | octet string | read-only |
This object indicates the SN of a rogue AP. |
| hwWlanUnauthedApIpAddress | 1.3.6.1.4.1.2011.6.139.13.3.2.1.5 | ipaddress | read-only |
This object indicates the IP address of a rogue AP. |
| hwWlanUnauthedApRecordTime | 1.3.6.1.4.1.2011.6.139.13.3.2.1.6 | dateandtime | read-only |
This object indicates the time when a rogue AP is recorded. |
| hwWlanUnauthedAPIPv6Address | 1.3.6.1.4.1.2011.6.139.13.3.2.1.7 | octet string | read-only |
This object indicates the IPv6 address of a rogue AP. |
| hwWlanApTable | 1.3.6.1.4.1.2011.6.139.13.3.3 | no-access |
This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.3.1 | no-access |
The index of this table is hwWlanApMac. |
||
| hwWlanApMac | 1.3.6.1.4.1.2011.6.139.13.3.3.1.1 | macaddress | no-access |
This object indicates the MAC address of an AP. |
| hwWlanApSn | 1.3.6.1.4.1.2011.6.139.13.3.3.1.2 | octet string | read-write |
This object indicates the sequence number (SN) of an AP. |
| hwWlanApTypeInfo | 1.3.6.1.4.1.2011.6.139.13.3.3.1.3 | octet string | read-only |
This object indicates the AP type. |
| hwWlanApName | 1.3.6.1.4.1.2011.6.139.13.3.3.1.4 | octet string | read-write |
This object indicates the AP name. |
| hwWlanApGroup | 1.3.6.1.4.1.2011.6.139.13.3.3.1.5 | octet string | read-write |
This object indicates the group to which an AP belongs. |
| hwWlanApRunState | 1.3.6.1.4.1.2011.6.139.13.3.3.1.6 | integer | read-only |
This object indicates the AP state. Enumeration: 'verMismatch': 12, 'countryCodeMismatch': 15, 'committing': 9, 'normal': 8, 'standby': 11, 'fault': 4, 'typeNotMatch': 3, 'nameConflicted': 13, 'commitFailed': 10, 'idle': 1, 'invalid': 14, 'download': 7, 'configFailed': 6, 'config': 5, 'autofind': 2. |
| hwWlanApSoftwareVersion | 1.3.6.1.4.1.2011.6.139.13.3.3.1.7 | octet string | read-only |
This object indicates the AP software version. |
| hwWlanApHardwareVersion | 1.3.6.1.4.1.2011.6.139.13.3.3.1.8 | octet string | read-only |
This object indicates the AP hardware version. |
| hwWlanApCpuType | 1.3.6.1.4.1.2011.6.139.13.3.3.1.9 | octet string | read-only |
This object indicates the CPU type of an AP. |
| hwWlanApCpufrequency | 1.3.6.1.4.1.2011.6.139.13.3.3.1.10 | integer32 | read-only |
This object indicates the CPU frequency of an AP.Unit: MHz. |
| hwWlanApMemoryType | 1.3.6.1.4.1.2011.6.139.13.3.3.1.11 | octet string | read-only |
This object indicates the memory type of an AP. |
| hwWlanApDomain | 1.3.6.1.4.1.2011.6.139.13.3.3.1.12 | octet string | read-only |
This object indicates the AP domain. |
| hwWlanApIpAddress | 1.3.6.1.4.1.2011.6.139.13.3.3.1.13 | ipaddress | read-only |
This object indicates the IP address of an AP. |
| hwWlanApIpNetMask | 1.3.6.1.4.1.2011.6.139.13.3.3.1.14 | ipaddress | read-only |
This object indicates the IP address mask of an AP. |
| hwWlanApGatewayIp | 1.3.6.1.4.1.2011.6.139.13.3.3.1.15 | ipaddress | read-only |
This object indicates the gateway IP address of an AP. |
| hwWlanApMemorySize | 1.3.6.1.4.1.2011.6.139.13.3.3.1.16 | integer32 | read-only |
This object indicates the memory size of an AP.Unit: MB. |
| hwWlanApFlashSize | 1.3.6.1.4.1.2011.6.139.13.3.3.1.17 | integer32 | read-only |
This object indicates the flash memory size of an AP.Unit: MB. |
| hwWlanApRunTime | 1.3.6.1.4.1.2011.6.139.13.3.3.1.18 | unsigned32 | read-only |
This object indicates the running time of an AP.Unit: tick. |
| hwWlanApAdminOper | 1.3.6.1.4.1.2011.6.139.13.3.3.1.19 | integer | read-only |
This object indicates administrative status of an AP. Enumeration: 'reset': 1, 'manufacturerConfig': 3. |
| hwWlanApDNS | 1.3.6.1.4.1.2011.6.139.13.3.3.1.20 | ipaddress | read-only |
This object indicates the AP DNS. |
| hwWlanApOnlineTime | 1.3.6.1.4.1.2011.6.139.13.3.3.1.21 | unsigned32 | read-only |
This object indicates online duration of an AP. |
| hwWlanApSysSoftwareDesc | 1.3.6.1.4.1.2011.6.139.13.3.3.1.22 | octet string | read-only |
This object indicates system software description of an AP. |
| hwWlanApSysHardtwareDesc | 1.3.6.1.4.1.2011.6.139.13.3.3.1.23 | octet string | read-only |
This object indicates system hardware description of an AP. |
| hwWlanApSysManufacture | 1.3.6.1.4.1.2011.6.139.13.3.3.1.24 | octet string | read-only |
This object indicates the manufacturer of an AP. |
| hwWlanApSysSoftwareName | 1.3.6.1.4.1.2011.6.139.13.3.3.1.25 | octet string | read-only |
This object indicates software name of an AP. |
| hwWlanApSysSoftwareVendor | 1.3.6.1.4.1.2011.6.139.13.3.3.1.26 | octet string | read-only |
This object indicates the manufacturer of the AP software. |
| hwWlanApBomCode | 1.3.6.1.4.1.2011.6.139.13.3.3.1.27 | octet string | read-only |
This object indicates the BOM code. |
| hwWlanApIpv6Address | 1.3.6.1.4.1.2011.6.139.13.3.3.1.28 | octet string | read-only |
This object indicates the IPv6 address. |
| hwWlanApIpv6NetMask | 1.3.6.1.4.1.2011.6.139.13.3.3.1.29 | octet string | read-only |
This object indicates the IPv6 address mask. |
| hwWlanApGatewayIpv6 | 1.3.6.1.4.1.2011.6.139.13.3.3.1.30 | octet string | read-only |
This object indicates the IPv6 gateway. |
| hwWlanApIpv6DNS | 1.3.6.1.4.1.2011.6.139.13.3.3.1.31 | octet string | read-only |
This object indicates the IPv6 DNS. |
| hwWlanApProtectAcIPv6Addr | 1.3.6.1.4.1.2011.6.139.13.3.3.1.32 | octet string | read-only |
This object indicates the IPv6 address of the standby AC. |
| hwWlanApBootCountTotal | 1.3.6.1.4.1.2011.6.139.13.3.3.1.33 | integer32 | read-only |
This object indicates the total number of times an AP is restarted. |
| hwWlanApBootCountPowerOff | 1.3.6.1.4.1.2011.6.139.13.3.3.1.34 | integer32 | read-only |
This object indicates the number of times an AP is restarted due to a power failure. |
| hwWlanApBootCountClear | 1.3.6.1.4.1.2011.6.139.13.3.3.1.35 | rowstatus | read-only |
This object clears the AP restart count. |
| hwWlanApElectronicLabel | 1.3.6.1.4.1.2011.6.139.13.3.3.1.36 | octet string | read-only |
This object indicates the electronic label of an AP. |
| hwWlanApWiredPortNum | 1.3.6.1.4.1.2011.6.139.13.3.3.1.37 | integer32 | read-only |
This object indicates the total number of wired interfaces. |
| hwWlanApWiredPortMtu | 1.3.6.1.4.1.2011.6.139.13.3.3.1.38 | integer32 | read-only |
This object indicates the maximum transmit unit (MTU) of a wired interface. |
| hwWlanApWiredPortMac | 1.3.6.1.4.1.2011.6.139.13.3.3.1.39 | macaddress | read-only |
This object indicates the MAC address of a wired interface. |
| hwWlanApMemoryUseRate | 1.3.6.1.4.1.2011.6.139.13.3.3.1.40 | integer32 | read-only |
This object indicates the memory usage.Unit: %. |
| hwWlanApCpuUseRate | 1.3.6.1.4.1.2011.6.139.13.3.3.1.41 | integer32 | read-only |
This object indicates the CPU usage.Unit: %. |
| hwWlanApFlashFreeSize | 1.3.6.1.4.1.2011.6.139.13.3.3.1.42 | integer32 | read-only |
This object indicates available space in the flash memory.Unit: KB. |
| hwWlanApTemperature | 1.3.6.1.4.1.2011.6.139.13.3.3.1.43 | integer32 | read-only |
This object indicates the operating temperature. |
| hwWlanApOnlineUserNum | 1.3.6.1.4.1.2011.6.139.13.3.3.1.44 | integer32 | read-only |
This object indicates the number of online users. |
| hwWlanApDualBandAssoc5gStaNum | 1.3.6.1.4.1.2011.6.139.13.3.3.1.45 | unsigned32 | read-only |
This object indicates the number of dual-band terminals that access the 5 GHz radio. |
| hwWlanApDualBandStaNum | 1.3.6.1.4.1.2011.6.139.13.3.3.1.46 | unsigned32 | read-only |
This object indicates the number of STAs that support dual frequency bands. |
| hwWlanApStaOnlineFailRatio | 1.3.6.1.4.1.2011.6.139.13.3.3.1.47 | unsigned32 | read-only |
This object indicates STA online failure ratio on an AP. |
| hwWlanApStaOfflineRatio | 1.3.6.1.4.1.2011.6.139.13.3.3.1.48 | unsigned32 | read-only |
This object indicates STA offline ratio of an AP. |
| hwWlanApStickyClientRatio | 1.3.6.1.4.1.2011.6.139.13.3.3.1.49 | unsigned32 | read-only |
This object indicates the proportion of sticky STAs to all STAs. |
| hwWlanApUpEthPortSpeed | 1.3.6.1.4.1.2011.6.139.13.3.3.1.50 | integer | read-only |
This object indicates the rate of an upstream Ethernet interface. Enumeration: 'speed10000': 4, 'speed10': 1, 'speed100': 2, 'speed1000': 3. |
| hwWlanApUpEthPortSpeedMode | 1.3.6.1.4.1.2011.6.139.13.3.3.1.51 | integer | read-only |
This object indicates the rate mode of an upstream Ethernet interface. Enumeration: 'auto': 1, 'forced': 2. |
| hwWlanApUpEthPortDuplex | 1.3.6.1.4.1.2011.6.139.13.3.3.1.52 | integer | read-only |
This object indicates the duplex state of an upstream Ethernet interface. Enumeration: 'full': 2, 'half': 1. |
| hwWlanApUpEthPortDuplexMode | 1.3.6.1.4.1.2011.6.139.13.3.3.1.53 | integer | read-only |
This object indicates the duplex mode of an upstream Ethernet interface. Enumeration: 'auto': 1, 'forced': 2. |
| hwWlanApUpPortSpeed | 1.3.6.1.4.1.2011.6.139.13.3.3.1.54 | integer32 | read-only |
This object indicates the real-time rate of an upstream interface.Unit: Kbps. |
| hwWlanAPUpPortPER | 1.3.6.1.4.1.2011.6.139.13.3.3.1.55 | integer32 | read-only |
This object indicates the packet error rate of an upstream interface. |
| hwWlanEthportUpRate | 1.3.6.1.4.1.2011.6.139.13.3.3.1.56 | integer32 | read-only |
This object indicates the upstream rate of an Ethernet interface. |
| hwWlanEthportDownRate | 1.3.6.1.4.1.2011.6.139.13.3.3.1.57 | integer32 | read-only |
This object indicates the downstream rate of an Ethernet interface. |
| hwWlanApAirportUpTraffic | 1.3.6.1.4.1.2011.6.139.13.3.3.1.58 | octet string | read-only |
This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanApAirportDwTraffic | 1.3.6.1.4.1.2011.6.139.13.3.3.1.59 | octet string | read-only |
This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanApEthportDwTraffic | 1.3.6.1.4.1.2011.6.139.13.3.3.1.60 | octet string | read-only |
This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanApEthportUpTraffic | 1.3.6.1.4.1.2011.6.139.13.3.3.1.61 | octet string | read-only |
This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanApUpPortRecvPackets | 1.3.6.1.4.1.2011.6.139.13.3.3.1.62 | counter64 | read-only |
This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits. |
| hwWlanApUpPortSendPackets | 1.3.6.1.4.1.2011.6.139.13.3.3.1.63 | counter64 | read-only |
This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits. |
| hwWlanApRowstatus | 1.3.6.1.4.1.2011.6.139.13.3.3.1.64 | rowstatus | read-only |
This object indicates the row status. |
| hwWlanApUpPortRecvBytes | 1.3.6.1.4.1.2011.6.139.13.3.3.1.65 | counter64 | read-only |
This object indicates the total number of bytes received on an upstream interface. |
| hwWlanApUpPortSendBytes | 1.3.6.1.4.1.2011.6.139.13.3.3.1.66 | counter64 | read-only |
This object indicates the total number of bytes sent on an upstream interface. |
| hwWlanApId | 1.3.6.1.4.1.2011.6.139.13.3.3.1.67 | unsigned32 | read-only |
Ap ID. |
| hwWlanCentralApId | 1.3.6.1.4.1.2011.6.139.13.3.3.1.68 | unsigned32 | read-only |
This object indicates the central AP ID. |
| hwWlanCentralApMac | 1.3.6.1.4.1.2011.6.139.13.3.3.1.69 | macaddress | read-only |
This object indicates the MAC address of an central AP. |
| hwWlanCentralApName | 1.3.6.1.4.1.2011.6.139.13.3.3.1.70 | octet string | read-only |
This object indicates the central AP name. |
| hwWlanApSDCardSize | 1.3.6.1.4.1.2011.6.139.13.3.3.1.71 | integer32 | read-only |
This object indicates the SD card size of an AP.Unit: MB. |
| hwWlanAPLongitude | 1.3.6.1.4.1.2011.6.139.13.3.3.1.72 | octet string | read-only |
This object indicates the longitude of an AP. |
| hwWlanAPLatitude | 1.3.6.1.4.1.2011.6.139.13.3.3.1.73 | octet string | read-only |
This object indicates the latitude of an AP. |
| hwWlanApTotalOnlineTime | 1.3.6.1.4.1.2011.6.139.13.3.3.1.74 | unsigned32 | read-only |
This object indicates total online duration of an AP. |
| hwWlanApDiscoverTime | 1.3.6.1.4.1.2011.6.139.13.3.3.1.75 | unsigned32 | read-only |
This object indicates discover duration of an AP. |
| hwWlanAPPoeWorkmode | 1.3.6.1.4.1.2011.6.139.13.3.3.1.76 | integer | read-only |
This object indicates the work mode of POE. Enumeration: 'af': 1, 'invalid': 4, 'bt': 3, 'bt60': 5, 'at': 2, 'bt90': 6. |
| hwWlanAPPoeExpectedWorkmode | 1.3.6.1.4.1.2011.6.139.13.3.3.1.77 | integer | read-only |
This object indicates the expected work mode of POE. Enumeration: 'af': 1, 'invalid': 4, 'bt': 3, 'bt60': 5, 'at': 2, 'bt90': 6. |
| hwWlanAPStaOnlineFailStatistics | 1.3.6.1.4.1.2011.6.139.13.3.3.1.78 | octet string | read-only |
This object indicates the Statistics of station online fail. |
| hwWlanAPStaOfflineStatistics | 1.3.6.1.4.1.2011.6.139.13.3.3.1.79 | octet string | read-only |
This object indicates the Statistics of station offline fail. |
| hwWlanAPPowerSupplyState | 1.3.6.1.4.1.2011.6.139.13.3.3.1.80 | integer | read-only |
This object indicates the AP power supply state. In Limited state, some functions are limited. In Disabled state, all radios are off, and some WLAN functions are unavailable. Enumeration: 'disabled': 2, 'limited': 3, 'full': 1, 'invalid': 4. |
| hwWlanApDataLinkState | 1.3.6.1.4.1.2011.6.139.13.3.3.1.81 | integer | read-only |
This object indicates the state of an AP data link. Enumeration: 'down': 1, 'run': 2, 'noneed': 3. |
| hwWlanApEnvironmentTemperature | 1.3.6.1.4.1.2011.6.139.13.3.3.1.82 | integer32 | read-only |
This object indicates the ambient temperature. |
| hwWlanApCpuTemperature | 1.3.6.1.4.1.2011.6.139.13.3.3.1.83 | integer32 | read-only |
This object indicates the CPU temperature. |
| hwWlanApNpTemperature | 1.3.6.1.4.1.2011.6.139.13.3.3.1.84 | integer32 | read-only |
This object indicates the NP chip temperature. |
| hwWlanApWiredPortTable | 1.3.6.1.4.1.2011.6.139.13.3.4 | no-access |
This table describes AP wired interfaces and is used to query attributes of the wired interfaces. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.4.1 | no-access |
The index of this table is hwWlanApMac and hwWlanApWiredPortIndex. |
||
| hwWlanApWiredPortIndex | 1.3.6.1.4.1.2011.6.139.13.3.4.1.1 | integer32 | no-access |
This object indicates the index of an AP's wired interface. |
| hwWlanApWiredPortType | 1.3.6.1.4.1.2011.6.139.13.3.4.1.2 | integer | read-only |
This object indicates the type of an AP's wired interface. Enumeration: 'adsl2plus': 5, 'gpon': 3, 'xge': 8, 'ge': 2, 'multige': 7, 'fe': 1, 'trunk': 6, 'epon': 4. |
| hwWlanApWiredPortDesc | 1.3.6.1.4.1.2011.6.139.13.3.4.1.3 | octet string | read-only |
This object indicates description of an AP's wired interface. |
| hwWlanApWiredPortState | 1.3.6.1.4.1.2011.6.139.13.3.4.1.4 | integer | read-only |
This object indicates status of an AP's wired interface. Enumeration: 'adminshutdown': 3, 'unknown': -1, 'stpshutdown': 4, 'up': 2, 'down': 1, 'block': 5. |
| hwWlanApWiredPortSpeed | 1.3.6.1.4.1.2011.6.139.13.3.4.1.5 | integer32 | read-only |
This object indicates the rate of an AP's wired interface. |
| hwWlanApMultiWiredPortDuplex | 1.3.6.1.4.1.2011.6.139.13.3.4.1.6 | integer | read-only |
This object indicates the duplex state of an AP's wired interface. Enumeration: 'unknown': -1, 'full': 2, 'half': 1. |
| hwWlanApMultiWiredPortNegotiation | 1.3.6.1.4.1.2011.6.139.13.3.4.1.7 | integer | read-only |
This object indicates the auto-negotiation mode of an AP's wired interface. Enumeration: 'auto': 1, 'unknown': -1, 'forced': 2. |
| hwWlanApMultiWiredPortMode | 1.3.6.1.4.1.2011.6.139.13.3.4.1.8 | integer | read-only |
This object indicates the working mode of an AP's wired interface.Default value: null. Enumeration: 'middle': 3, 'null': 256, 'endpoint': 2, 'root': 1. |
| hwWlanApWiredPortApId | 1.3.6.1.4.1.2011.6.139.13.3.4.1.9 | unsigned32 | read-only |
This object indicates the AP ID. |
| hwWlanApWiredPortApName | 1.3.6.1.4.1.2011.6.139.13.3.4.1.10 | octet string | read-only |
This object indicates the AP name. |
| hwWlanApWiredPortTrunkID | 1.3.6.1.4.1.2011.6.139.13.3.4.1.11 | unsigned32 | read-only |
This object indicates the port trunk ID. |
| hwWlanApWiredPortTrunkActiveFlag | 1.3.6.1.4.1.2011.6.139.13.3.4.1.12 | integer | read-only |
This object indicates the port trunk active flag. Enumeration: 'enable': 2, 'disable': 1, 'invalid': 3. |
| hwWlanApWiredPortDot1xAuthState | 1.3.6.1.4.1.2011.6.139.13.3.4.1.13 | integer | read-only |
This object indicates the dot1x auth state. Enumeration: 'fail': 4, 'init': 1, 'authenticating': 2, 'invalid': 255, 'success': 3. |
| hwWlanApWiredPortStatTable | 1.3.6.1.4.1.2011.6.139.13.3.5 | no-access |
This table is used to query or clear statistics on AP wired interfaces. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.5.1 | no-access |
The indexes of this table are hwWlanApMac and hwWlanApWiredPortIndex. |
||
| hwWlanApWiredPortStatClear | 1.3.6.1.4.1.2011.6.139.13.3.5.1.1 | integer32 | read-write |
This object clears interface statistics. |
| hwWlanApWiredPortUpDwnTimes | 1.3.6.1.4.1.2011.6.139.13.3.5.1.2 | unsigned32 | read-only |
This object indicates the number of times an AP's wired interface alternates between Up and Down. |
| hwWlanApWiredPortInPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.3 | counter64 | read-only |
This object indicates the total number of frames received on an AP's wired interface. |
| hwWlanApWiredPortInUnicastPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.4 | counter64 | read-only |
This object indicates the number of unicast frames received on an AP's wired interface. |
| hwWlanApWiredPortInNonUnicastPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.5 | counter64 | read-only |
This object indicates the number of non-unicast frames received on an AP's wired interface. |
| hwWlanApWiredPortInBytes | 1.3.6.1.4.1.2011.6.139.13.3.5.1.6 | counter64 | read-only |
This object indicates the number of bytes received on an AP's wired interface. |
| hwWlanApWiredPortInErrorPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.7 | counter64 | read-only |
This object indicates the number of error frames received on an AP's wired interface. |
| hwWlanApWiredPortInDiscardPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.8 | counter64 | read-only |
This object indicates the number of dropped frames received on an AP's wired interface. |
| hwWlanApWiredPortOutPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.9 | counter64 | read-only |
This object indicates the total number of frames sent on an AP's wired interface. |
| hwWlanApWiredPortOutUnicastPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.10 | counter64 | read-only |
This object indicates the number of unicast frames sent on an AP's wired interface. |
| hwWlanApWiredPortOutNonUnicastPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.11 | counter64 | read-only |
This object indicates the number of non-unicast frames sent on an AP's wired interface. |
| hwWlanApWiredPortOutBytes | 1.3.6.1.4.1.2011.6.139.13.3.5.1.12 | counter64 | read-only |
This object indicates the number of bytes sent on an AP's wired interface. |
| hwWlanApWiredPortOutErrorsPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.13 | counter64 | read-only |
This object indicates the number of error packets sent on an AP's wired interface. |
| hwWlanApWiredPortOutDiscardPkts | 1.3.6.1.4.1.2011.6.139.13.3.5.1.14 | counter64 | read-only |
This object indicates the number of dropped packets sent on an AP's wired interface. |
| hwWlanApWiredPortLldpTable | 1.3.6.1.4.1.2011.6.139.13.3.6 | no-access |
This table is used to query LLDP neighbor information of a specified AP. No entry can be created, modified, or deleted in this table. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.6.1 | no-access |
The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, and hwWlanApWiredPortLldpRemIndex. |
||
| hwWlanApWiredPortLldpRemLocalPortNum | 1.3.6.1.4.1.2011.6.139.13.3.6.1.1 | integer32 | no-access |
This object indicates the local port number of the remote neighbor of the AP's wired interface. |
| hwWlanApWiredPortLldpRemIndex | 1.3.6.1.4.1.2011.6.139.13.3.6.1.2 | integer32 | no-access |
This object indicates the index of the remote neighbor interface of the AP's wired interface. |
| hwWlanApWiredPortLldpRemChassisIdSubtype | 1.3.6.1.4.1.2011.6.139.13.3.6.1.3 | integer32 | read-only |
This object indicates the subtype of the remote neighbor of the AP's wired interface. |
| hwWlanApWiredPortLldpRemChassisId | 1.3.6.1.4.1.2011.6.139.13.3.6.1.4 | octet string | read-only |
This object indicates the subtype ID of the remote neighbor of the AP's wired interface. |
| hwWlanApWiredPortLldpRemPortIdSubtype | 1.3.6.1.4.1.2011.6.139.13.3.6.1.5 | integer32 | read-only |
This object indicates the subtype of the remote neighbor interface of the AP's wired interface. |
| hwWlanApWiredPortLldpRemPortId | 1.3.6.1.4.1.2011.6.139.13.3.6.1.6 | octet string | read-only |
This object indicates the ID of the remote neighbor interface of the AP's wired interface. |
| hwWlanApWiredPortLldpRemPortDesc | 1.3.6.1.4.1.2011.6.139.13.3.6.1.7 | octet string | read-only |
This object indicates descriptions about the remote neighbor interface of the AP's wired interface. |
| hwWlanApWiredPortLldpRemSysName | 1.3.6.1.4.1.2011.6.139.13.3.6.1.8 | octet string | read-only |
This object indicates the system name of the remote neighbor of the AP's wired interface. |
| hwWlanApWiredPortLldpRemSysDesc | 1.3.6.1.4.1.2011.6.139.13.3.6.1.9 | octet string | read-only |
This object indicates system descriptions about the remote neighbor of the AP's wired interface. |
| hwWlanApWiredPortLldpRemSysCapSupported | 1.3.6.1.4.1.2011.6.139.13.3.6.1.10 | integer32 | read-only |
This object indicates whether the remote neighbor of the AP's wired interface supports the system capability. |
| hwWlanApWiredPortLldpRemSysCapEnabled | 1.3.6.1.4.1.2011.6.139.13.3.6.1.11 | integer32 | read-only |
This object enables the system capability of the remote neighbor of the AP's wired interface. |
| hwWlanApWiredPortLldpRemLocalApId | 1.3.6.1.4.1.2011.6.139.13.3.6.1.12 | integer32 | read-only |
This object indicates the AP ID. |
| hwWlanApWiredPortLldpRemManAddrTable | 1.3.6.1.4.1.2011.6.139.13.3.7 | no-access |
This table is used to query management addresses of LLDP neighbors of a specified AP. No entry can be created, modified, or deleted in this table. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.7.1 | no-access |
The indexes of this table are hwWlanApMac, hwWlanApWiredPortLldpRemLocalPortNum, hwWlanApWiredPortLldpRemIndex, hwWlanApWiredPortLldpRemManAddrSubtype, and hwWlanApWiredPortLldpRemManAddr. |
||
| hwWlanApWiredPortLldpRemManAddrSubtype | 1.3.6.1.4.1.2011.6.139.13.3.7.1.1 | integer32 | no-access |
This object indicates the This object indicates the remote management address subtype of the wired interface. |
| hwWlanApWiredPortLldpRemManAddr | 1.3.6.1.4.1.2011.6.139.13.3.7.1.2 | octet string | no-access |
This object indicates the remote management address of the wired interface. |
| hwWlanApWiredPortLldpRemManAddrIfSubtype | 1.3.6.1.4.1.2011.6.139.13.3.7.1.3 | integer32 | read-only |
This object indicates the interface subtype of the remote management address of the wired interface. |
| hwWlanApWiredPortLldpRemManAddrIfId | 1.3.6.1.4.1.2011.6.139.13.3.7.1.4 | integer32 | read-only |
This object indicates the interface ID of the remote management address of the wired interface. |
| hwWlanApWiredPortLldpRemManAddrOID | 1.3.6.1.4.1.2011.6.139.13.3.7.1.5 | octet string | read-only |
This object indicates the remote management address OID of the wired interface. |
| hwWlanApOnlineFailTable | 1.3.6.1.4.1.2011.6.139.13.3.8 | no-access |
This table is used to query or clear AP online failure records, including failure time and reason. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.8.1 | no-access |
The index of this table is hwWlanApOnlineFailMac. |
||
| hwWlanApOnlineFailMac | 1.3.6.1.4.1.2011.6.139.13.3.8.1.1 | macaddress | no-access |
This object indicates the MAC address of the STA who fails to go online. |
| hwWlanApOnlineFailTime | 1.3.6.1.4.1.2011.6.139.13.3.8.1.2 | octet string | read-only |
This object indicates the latest time when the STA fails to go online. |
| hwWlanApOnlineFailReason | 1.3.6.1.4.1.2011.6.139.13.3.8.1.3 | octet string | read-only |
This object indicates the reason for the latest STA online failure. |
| hwWlanApOnlineFailRowStatus | 1.3.6.1.4.1.2011.6.139.13.3.8.1.4 | rowstatus | read-write |
This object indicates that online failure records of STAs are deleted based on MAC addresses. |
| hwWlanApOnlineFailInfo | 1.3.6.1.4.1.2011.6.139.13.3.8.1.5 | octet string | read-only |
This object indicates information about the last three online failures of an AP, including the failure time and reasons. |
| hwWlanApOfflineTable | 1.3.6.1.4.1.2011.6.139.13.3.9 | no-access |
This table is used to query or clear AP offline records, including offline time and reason. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.9.1 | no-access |
The index of this table is hwWlanApOfflineMac. |
||
| hwWlanApOfflineMac | 1.3.6.1.4.1.2011.6.139.13.3.9.1.1 | macaddress | no-access |
This object indicates the MAC address of an AP. |
| hwWlanApOfflineTime | 1.3.6.1.4.1.2011.6.139.13.3.9.1.2 | octet string | read-only |
This object indicates the AP offline time. |
| hwWlanApOfflineReason | 1.3.6.1.4.1.2011.6.139.13.3.9.1.3 | octet string | read-only |
This object indicates the AP offline reason. |
| hwWlanApOfflineRowStatus | 1.3.6.1.4.1.2011.6.139.13.3.9.1.4 | rowstatus | read-only |
This object clears AP offline records. |
| hwWlanApOfflineInfo | 1.3.6.1.4.1.2011.6.139.13.3.9.1.5 | octet string | read-only |
Description. |
| hwWlanIDIndexedApTable | 1.3.6.1.4.1.2011.6.139.13.3.10 | no-access |
This table is used to add, delete, modify, reset, or confirm APs. You can also use the table to query the configuration and restore factory settings of APs. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.10.1 | no-access |
The index of this table is hwWlanIDIndexedApId. |
||
| hwWlanIDIndexedApId | 1.3.6.1.4.1.2011.6.139.13.3.10.1.1 | unsigned32 | no-access |
Ap ID. |
| hwWlanIDIndexedApMac | 1.3.6.1.4.1.2011.6.139.13.3.10.1.2 | macaddress | read-write |
This object indicates the MAC address of an AP. |
| hwWlanIDIndexedApSn | 1.3.6.1.4.1.2011.6.139.13.3.10.1.3 | octet string | read-write |
This object indicates the sequence number (SN) of an AP. |
| hwWlanIDIndexedApTypeInfo | 1.3.6.1.4.1.2011.6.139.13.3.10.1.4 | octet string | read-write |
This object indicates the AP type. |
| hwWlanIDIndexedApName | 1.3.6.1.4.1.2011.6.139.13.3.10.1.5 | octet string | read-write |
This object indicates the AP name. |
| hwWlanIDIndexedApGroup | 1.3.6.1.4.1.2011.6.139.13.3.10.1.6 | octet string | read-write |
This object indicates the group to which an AP belongs. |
| hwWlanIDIndexedApRunState | 1.3.6.1.4.1.2011.6.139.13.3.10.1.7 | integer | read-only |
This object indicates the AP state. Enumeration: 'verMismatch': 12, 'countryCodeMismatch': 15, 'committing': 9, 'normal': 8, 'standby': 11, 'fault': 4, 'typeNotMatch': 3, 'nameConflicted': 13, 'commitFailed': 10, 'idle': 1, 'invalid': 14, 'download': 7, 'configFailed': 6, 'config': 5, 'autofind': 2. |
| hwWlanIDIndexedApSoftwareVersion | 1.3.6.1.4.1.2011.6.139.13.3.10.1.8 | octet string | read-only |
This object indicates the AP software version. |
| hwWlanIDIndexedApHardwareVersion | 1.3.6.1.4.1.2011.6.139.13.3.10.1.9 | octet string | read-only |
This object indicates the AP hardware version. |
| hwWlanIDIndexedApCpuType | 1.3.6.1.4.1.2011.6.139.13.3.10.1.10 | octet string | read-only |
This object indicates the CPU type of an AP. |
| hwWlanIDIndexedApCpufrequency | 1.3.6.1.4.1.2011.6.139.13.3.10.1.11 | integer32 | read-only |
This object indicates the CPU frequency of an AP.Unit: MHz. |
| hwWlanIDIndexedApMemoryType | 1.3.6.1.4.1.2011.6.139.13.3.10.1.12 | octet string | read-only |
This object indicates the memory type of an AP. |
| hwWlanIDIndexedApDomain | 1.3.6.1.4.1.2011.6.139.13.3.10.1.13 | octet string | read-only |
This object indicates the AP domain. |
| hwWlanIDIndexedApIpAddress | 1.3.6.1.4.1.2011.6.139.13.3.10.1.14 | ipaddress | read-only |
This object indicates the IP address of an AP. |
| hwWlanIDIndexedApIpNetMask | 1.3.6.1.4.1.2011.6.139.13.3.10.1.15 | ipaddress | read-only |
This object indicates the IP address mask of an AP. |
| hwWlanIDIndexedApGatewayIp | 1.3.6.1.4.1.2011.6.139.13.3.10.1.16 | ipaddress | read-only |
This object indicates the gateway IP address of an AP. |
| hwWlanIDIndexedApMemorySize | 1.3.6.1.4.1.2011.6.139.13.3.10.1.17 | integer32 | read-only |
This object indicates the memory size of an AP.Unit: MB. |
| hwWlanIDIndexedApFlashSize | 1.3.6.1.4.1.2011.6.139.13.3.10.1.18 | integer32 | read-only |
This object indicates the flash memory size of an AP.Unit: MB. |
| hwWlanIDIndexedApRunTime | 1.3.6.1.4.1.2011.6.139.13.3.10.1.19 | unsigned32 | read-only |
This object indicates the running time of an AP.Unit: tick. |
| hwWlanIDIndexedApAdminOper | 1.3.6.1.4.1.2011.6.139.13.3.10.1.20 | integer | read-only |
This object indicates administrative status of an AP. Enumeration: 'reset': 1, 'manufacturerConfig': 3. |
| hwWlanIDIndexedApDNS | 1.3.6.1.4.1.2011.6.139.13.3.10.1.21 | ipaddress | read-only |
This object indicates the AP DNS. |
| hwWlanIDIndexedApOnlineTime | 1.3.6.1.4.1.2011.6.139.13.3.10.1.22 | unsigned32 | read-only |
This object indicates online duration of an AP. |
| hwWlanIDIndexedApSysSoftwareDesc | 1.3.6.1.4.1.2011.6.139.13.3.10.1.23 | octet string | read-only |
This object indicates system software description of an AP. |
| hwWlanIDIndexedApSysHardtwareDesc | 1.3.6.1.4.1.2011.6.139.13.3.10.1.24 | octet string | read-only |
This object indicates system hardware description of an AP. |
| hwWlanIDIndexedApSysManufacture | 1.3.6.1.4.1.2011.6.139.13.3.10.1.25 | octet string | read-only |
This object indicates the manufacturer of an AP. |
| hwWlanIDIndexedApSysSoftwareName | 1.3.6.1.4.1.2011.6.139.13.3.10.1.26 | octet string | read-only |
This object indicates software name of an AP. |
| hwWlanIDIndexedApSysSoftwareVendor | 1.3.6.1.4.1.2011.6.139.13.3.10.1.27 | octet string | read-only |
This object indicates the manufacturer of the AP software. |
| hwWlanIDIndexedApBomCode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.28 | octet string | read-only |
This object indicates the BOM code. |
| hwWlanIDIndexedApIpv6Address | 1.3.6.1.4.1.2011.6.139.13.3.10.1.29 | octet string | read-only |
This object indicates the IPv6 address. |
| hwWlanIDIndexedApIpv6NetMask | 1.3.6.1.4.1.2011.6.139.13.3.10.1.30 | octet string | read-only |
This object indicates the IPv6 address mask. |
| hwWlanIDIndexedApGatewayIpv6 | 1.3.6.1.4.1.2011.6.139.13.3.10.1.31 | octet string | read-only |
This object indicates the IPv6 gateway. |
| hwWlanIDIndexedApIpv6DNS | 1.3.6.1.4.1.2011.6.139.13.3.10.1.32 | octet string | read-only |
This object indicates the IPv6 DNS. |
| hwWlanIDIndexedApProtectAcIPv6Addr | 1.3.6.1.4.1.2011.6.139.13.3.10.1.33 | octet string | read-only |
This object indicates the IPv6 address of the standby AC. |
| hwWlanIDIndexedApBootCountTotal | 1.3.6.1.4.1.2011.6.139.13.3.10.1.34 | integer32 | read-only |
This object indicates the total number of times an AP is restarted. |
| hwWlanIDIndexedApBootCountPowerOff | 1.3.6.1.4.1.2011.6.139.13.3.10.1.35 | integer32 | read-only |
This object indicates the number of times an AP is restarted due to a power failure. |
| hwWlanIDIndexedApBootCountClear | 1.3.6.1.4.1.2011.6.139.13.3.10.1.36 | rowstatus | read-only |
This object clears the AP restart count. |
| hwWlanIDIndexedApElectronicLabel | 1.3.6.1.4.1.2011.6.139.13.3.10.1.37 | octet string | read-only |
This object indicates the electronic label of an AP. |
| hwWlanIDIndexedApWiredPortNum | 1.3.6.1.4.1.2011.6.139.13.3.10.1.38 | integer32 | read-only |
This object indicates the total number of wired interfaces. |
| hwWlanIDIndexedApWiredPortMtu | 1.3.6.1.4.1.2011.6.139.13.3.10.1.39 | integer32 | read-only |
This object indicates the maximum transmit unit (MTU) of a wired interface. |
| hwWlanIDIndexedApWiredPortMac | 1.3.6.1.4.1.2011.6.139.13.3.10.1.40 | macaddress | read-only |
This object indicates the MAC address of a wired interface. |
| hwWlanIDIndexedApMemoryUseRate | 1.3.6.1.4.1.2011.6.139.13.3.10.1.41 | integer32 | read-only |
This object indicates the memory usage.Unit: %. |
| hwWlanIDIndexedApCpuUseRate | 1.3.6.1.4.1.2011.6.139.13.3.10.1.42 | integer32 | read-only |
This object indicates the CPU usage.Unit: %. |
| hwWlanIDIndexedApFlashFreeSize | 1.3.6.1.4.1.2011.6.139.13.3.10.1.43 | integer32 | read-only |
This object indicates available space in the flash memory.Unit: KB. |
| hwWlanIDIndexedApTemperature | 1.3.6.1.4.1.2011.6.139.13.3.10.1.44 | integer32 | read-only |
This object indicates the operating temperature. |
| hwWlanIDIndexedApOnlineUserNum | 1.3.6.1.4.1.2011.6.139.13.3.10.1.45 | integer32 | read-only |
This object indicates the number of online users. |
| hwWlanIDIndexedApDualBandAssoc5gStaNum | 1.3.6.1.4.1.2011.6.139.13.3.10.1.46 | unsigned32 | read-only |
This object indicates the number of dual-band terminals that access the 5 GHz radio. |
| hwWlanIDIndexedApDualBandStaNum | 1.3.6.1.4.1.2011.6.139.13.3.10.1.47 | unsigned32 | read-only |
This object indicates the number of STAs that support dual frequency bands. |
| hwWlanIDIndexedApStaOnlineFailRatio | 1.3.6.1.4.1.2011.6.139.13.3.10.1.48 | unsigned32 | read-only |
This object indicates STA online failure ratio on an AP. |
| hwWlanIDIndexedApStaOfflineRatio | 1.3.6.1.4.1.2011.6.139.13.3.10.1.49 | unsigned32 | read-only |
This object indicates STA offline ratio of an AP. |
| hwWlanIDIndexedApStickyClientRatio | 1.3.6.1.4.1.2011.6.139.13.3.10.1.50 | unsigned32 | read-only |
This object indicates the proportion of sticky STAs to all STAs. |
| hwWlanIDIndexedApUpEthPortSpeed | 1.3.6.1.4.1.2011.6.139.13.3.10.1.51 | integer | read-only |
This object indicates the rate of an upstream Ethernet interface. Enumeration: 'speed10000': 4, 'speed10': 1, 'speed100': 2, 'speed1000': 3. |
| hwWlanIDIndexedApUpEthPortSpeedMode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.52 | integer | read-only |
This object indicates the rate mode of an upstream Ethernet interface. Enumeration: 'auto': 1, 'forced': 2. |
| hwWlanIDIndexedApUpEthPortDuplex | 1.3.6.1.4.1.2011.6.139.13.3.10.1.53 | integer | read-only |
This object indicates the duplex state of an upstream Ethernet interface. Enumeration: 'full': 2, 'half': 1. |
| hwWlanIDIndexedApUpEthPortDuplexMode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.54 | integer | read-only |
This object indicates the duplex mode of an upstream Ethernet interface. Enumeration: 'auto': 1, 'forced': 2. |
| hwWlanIDIndexedApUpPortSpeed | 1.3.6.1.4.1.2011.6.139.13.3.10.1.55 | integer32 | read-only |
This object indicates the real-time rate of an upstream interface.Unit: Kbps. |
| hwWlanIDIndexedAPUpPortPER | 1.3.6.1.4.1.2011.6.139.13.3.10.1.56 | integer32 | read-only |
This object indicates the packet error rate of an upstream interface. |
| hwWlanIDIndexedEthportUpRate | 1.3.6.1.4.1.2011.6.139.13.3.10.1.57 | integer32 | read-only |
This object indicates the upstream rate of an Ethernet interface. |
| hwWlanIDIndexedEthportDownRate | 1.3.6.1.4.1.2011.6.139.13.3.10.1.58 | integer32 | read-only |
This object indicates the downstream rate of an Ethernet interface. |
| hwWlanIDIndexedApAirportUpTraffic | 1.3.6.1.4.1.2011.6.139.13.3.10.1.59 | octet string | read-only |
This object indicates the traffic volume on an upstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanIDIndexedApAirportDwTraffic | 1.3.6.1.4.1.2011.6.139.13.3.10.1.60 | octet string | read-only |
This object indicates the traffic volume on a downstream wireless interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanIDIndexedApEthportDwTraffic | 1.3.6.1.4.1.2011.6.139.13.3.10.1.61 | octet string | read-only |
This object indicates the traffic volume on a downstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanIDIndexedApEthportUpTraffic | 1.3.6.1.4.1.2011.6.139.13.3.10.1.62 | octet string | read-only |
This object indicates the traffic volume on an upstream wired interface.Unit: bytes. The value is reported in 64 bits. |
| hwWlanIDIndexedApUpPortRecvPackets | 1.3.6.1.4.1.2011.6.139.13.3.10.1.63 | counter64 | read-only |
This object indicates the total number of frames received on an upstream interface, which is extended to 64 bits. |
| hwWlanIDIndexedApUpPortSendPackets | 1.3.6.1.4.1.2011.6.139.13.3.10.1.64 | counter64 | read-only |
This object indicates the total number of frames sent on an upstream interface, which is extended to 64 bits. |
| hwWlanIDIndexedApUpPortRecvBytes | 1.3.6.1.4.1.2011.6.139.13.3.10.1.65 | counter64 | read-only |
This object indicates the total number of bytes received on an upstream interface. |
| hwWlanIDIndexedApUpPortSendBytes | 1.3.6.1.4.1.2011.6.139.13.3.10.1.66 | counter64 | read-only |
This object indicates the total number of bytes sent on an upstream interface. |
| hwWlanIDIndexedCentralApId | 1.3.6.1.4.1.2011.6.139.13.3.10.1.67 | unsigned32 | read-only |
This object indicates the central AP ID. |
| hwWlanIDIndexedCentralApMac | 1.3.6.1.4.1.2011.6.139.13.3.10.1.68 | macaddress | read-only |
This object indicates the MAC address of an central AP. |
| hwWlanIDIndexedCentralApName | 1.3.6.1.4.1.2011.6.139.13.3.10.1.69 | octet string | read-only |
This object indicates the central AP name. |
| hwWlanIDIndexedApRowstatus | 1.3.6.1.4.1.2011.6.139.13.3.10.1.70 | rowstatus | read-only |
This object indicates the row status. |
| hwWlanIDIndexedApSDCardSize | 1.3.6.1.4.1.2011.6.139.13.3.10.1.71 | integer32 | read-only |
This object indicates the SD card size of an AP.Unit: MB. |
| hwWlanIDIndexedAPLongitude | 1.3.6.1.4.1.2011.6.139.13.3.10.1.72 | octet string | read-only |
This object indicates the longitude of an AP. |
| hwWlanIDIndexedAPLatitude | 1.3.6.1.4.1.2011.6.139.13.3.10.1.73 | octet string | read-only |
This object indicates the latitude of an AP. |
| hwWlanIDIndexedAPUUIDString | 1.3.6.1.4.1.2011.6.139.13.3.10.1.74 | octet string | read-write |
This object indicates the UUID string value of an AP. |
| hwWlanIDIndexedAPUUIDHex | 1.3.6.1.4.1.2011.6.139.13.3.10.1.75 | octet string | read-write |
This object indicates the UUID Hex value of an AP. |
| hwWlanIDIndexedApChannelLoadMode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.76 | integer | read-only |
This object indicates channel lode mode. The default value is outdoor. Enumeration: 'outdoor': 2, 'indoor': 1, 'outToindoor': 3. |
| hwWlanIDIndexedAPPoeWorkmode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.77 | integer | read-only |
This object indicates the work mode of POE. Enumeration: 'af': 1, 'invalid': 4, 'bt': 3, 'bt60': 5, 'at': 2, 'bt90': 6. |
| hwWlanIDIndexedAPPoeExpectedWorkmode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.78 | integer | read-only |
This object indicates the expected work mode of POE. Enumeration: 'af': 1, 'invalid': 4, 'bt': 3, 'bt60': 5, 'at': 2, 'bt90': 6. |
| hwWlanIDIndexedApTotalOnlineTime | 1.3.6.1.4.1.2011.6.139.13.3.10.1.79 | unsigned32 | read-only |
This object indicates total online duration of an AP. |
| hwWlanIDIndexedApDiscoverTime | 1.3.6.1.4.1.2011.6.139.13.3.10.1.80 | unsigned32 | read-only |
This object indicates discover duration of an AP. |
| hwWlanIDIndexedApSiteCode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.81 | octet string | read-write |
This object indicates the Site code of an AP. |
| hwWlanIDIndexedApDomainName | 1.3.6.1.4.1.2011.6.139.13.3.10.1.82 | octet string | read-write |
This object indicates the Domain name of an AP. |
| hwWlanIDIndexedApBranchGroup | 1.3.6.1.4.1.2011.6.139.13.3.10.1.83 | octet string | read-write |
This object indicates the branch group name of an AP. |
| hwWlanIDIndexedApNatIpAddress | 1.3.6.1.4.1.2011.6.139.13.3.10.1.84 | ipaddress | read-only |
This object indicates the Nat IP address of an AP. |
| hwWlanIDIndexedApStaOnlineFailStatistics | 1.3.6.1.4.1.2011.6.139.13.3.10.1.85 | octet string | read-only |
This object indicates the Statistics of station online fail. |
| hwWlanIDIndexedApStaOfflineStatistics | 1.3.6.1.4.1.2011.6.139.13.3.10.1.86 | octet string | read-only |
This object indicates the Statistics of station offline fail. |
| hwWlanIDIndexedAPPowerSupplyState | 1.3.6.1.4.1.2011.6.139.13.3.10.1.87 | integer | read-only |
This object indicates the AP power supply state. In Limited state, some functions are limited. In Disabled state, all radios are off, and some WLAN functions are unavailable. Enumeration: 'disabled': 2, 'limited': 3, 'full': 1, 'invalid': 4. |
| hwWlanIDIndexedApMajorString | 1.3.6.1.4.1.2011.6.139.13.3.10.1.88 | octet string | read-write |
This object indicates the string type value of Major field in the BLE broadcast frame of an AP. |
| hwWlanIDIndexedApMajorHex | 1.3.6.1.4.1.2011.6.139.13.3.10.1.89 | octet string | read-write |
This object indicates the hex type value of Major field in the BLE broadcast frame of an AP. |
| hwWlanIDIndexedApMajorDecimal | 1.3.6.1.4.1.2011.6.139.13.3.10.1.90 | integer32 | read-write |
This object indicates the decimal type value of Major field in the BLE broadcast frame of an AP. The default value is -1. |
| hwWlanIDIndexedApMinorString | 1.3.6.1.4.1.2011.6.139.13.3.10.1.91 | octet string | read-write |
This object indicates the string type value of Minor field in the BLE broadcast frame of an AP. |
| hwWlanIDIndexedApMinorHex | 1.3.6.1.4.1.2011.6.139.13.3.10.1.92 | octet string | read-write |
This object indicates the hex type value of Minor field in the BLE broadcast frame of an AP. |
| hwWlanIDIndexedApMinorDecimal | 1.3.6.1.4.1.2011.6.139.13.3.10.1.93 | integer32 | read-write |
This object indicates the decimal type value of Minor field in the BLE broadcast frame of an AP. The default value is -1. |
| hwWlanIDIndexedApReferenceRSSI | 1.3.6.1.4.1.2011.6.139.13.3.10.1.94 | integer32 | read-write |
This object indicates the RSSI value of an AP. The default value is 0. |
| hwWlanIDIndexedApEnvironmentTemperature | 1.3.6.1.4.1.2011.6.139.13.3.10.1.95 | integer32 | read-only |
This object indicates the ambient temperature. |
| hwWlanIDIndexedApCpuTemperature | 1.3.6.1.4.1.2011.6.139.13.3.10.1.96 | integer32 | read-only |
This object indicates the CPU temperature. |
| hwWlanIDIndexedApNpTemperature | 1.3.6.1.4.1.2011.6.139.13.3.10.1.97 | integer32 | read-only |
This object indicates the NP chip temperature. |
| hwWlanIDIndexedApZoneName | 1.3.6.1.4.1.2011.6.139.13.3.10.1.98 | octet string | read-write |
This object indicates the AP zone name. |
| hwWlanIDIndexedApDataLinkState | 1.3.6.1.4.1.2011.6.139.13.3.10.1.99 | integer | read-only |
This object indicates the state of an AP data link. Enumeration: 'down': 1, 'run': 2, 'noneed': 3. |
| hwWlanIDIndexedApRtuStatus | 1.3.6.1.4.1.2011.6.139.13.3.10.1.100 | integer | read-only |
This object indicates the AP RTU status. Enumeration: 'downloading': 1, 'noLicenseOnAP': 7, 'invalidLicense': 4, 'notActive': 3, 'invalidStatus': 255, 'noLicenseOnAC': 8, 'notSupport': 6, 'active': 2, 'flashMemoryNotEnough': 5. |
| hwWlanIDIndexedApRadioMode | 1.3.6.1.4.1.2011.6.139.13.3.10.1.101 | integer | read-only |
This object indicates the actual radio switch-mode of AP. Enumeration: 'threeRadio': 4, 'twoRadioStandard': 1, 'twoRadioIndependentScan': 5, 'twoRadio2gEnhanced': 3, 'twoRadio5gEnhanced': 2, 'notSupport': 255. |
| hwWlanApOnlineFailReasonTable | 1.3.6.1.4.1.2011.6.139.13.3.11 | no-access |
This table is used to get AP online fail reason counts. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.11.1 | no-access |
This table is used to get AP online fail reason counts. |
||
| hwWlanApOnlineFailReasonIndex | 1.3.6.1.4.1.2011.6.139.13.3.11.1.1 | integer32 | no-access |
This object indicates the AP online fail reason index. |
| hwWlanApOnlineFailReasonDesc | 1.3.6.1.4.1.2011.6.139.13.3.11.1.2 | octet string | read-only |
This object indicates the AP online fail reason description. |
| hwWlanApOnlineFailReasonCount | 1.3.6.1.4.1.2011.6.139.13.3.11.1.3 | integer32 | read-only |
This object indicates the the AP online fail reason counts. |
| hwWlanApOfflineReasonTable | 1.3.6.1.4.1.2011.6.139.13.3.12 | no-access |
This table is used to get AP offline reason counts. |
|
| 1.3.6.1.4.1.2011.6.139.13.3.12.1 | no-access |
This table is used to get AP offline reason counts. |
||
| hwWlanApOfflineReasonIndex | 1.3.6.1.4.1.2011.6.139.13.3.12.1.1 | integer32 | no-access |
This object indicates the AP offline reason index. |
| hwWlanApOfflineReasonDesc | 1.3.6.1.4.1.2011.6.139.13.3.12.1.2 | octet string | read-only |
This object indicates the AP offline reason description. |
| hwWlanApOfflineReasonCount | 1.3.6.1.4.1.2011.6.139.13.3.12.1.3 | integer32 | read-only |
This object indicates the AP offline reason counts. |
| hwWlanAPConformance | 1.3.6.1.4.1.2011.6.139.13.4 | |||
| hwWlanAPCompliances | 1.3.6.1.4.1.2011.6.139.13.4.1 | |||
| hwWlanAPCompliance | 1.3.6.1.4.1.2011.6.139.13.4.1.1 |
Description. |
||
| hwWlanAPObjectGroups | 1.3.6.1.4.1.2011.6.139.13.4.2 | |||
| hwWlanApTrapGroup | 1.3.6.1.4.1.2011.6.139.13.4.2.1 |
Description. |
||
| hwWlanApTrapObjectsGroup | 1.3.6.1.4.1.2011.6.139.13.4.2.2 |
Description. |
||
| hwWlanApTypeGroup | 1.3.6.1.4.1.2011.6.139.13.4.2.3 |
Description. |
||
| hwWlanApInfoGroup | 1.3.6.1.4.1.2011.6.139.13.4.2.4 |
Description. |
||