HUAWEI-SECURITY-IPSEC-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
| Home | MIB: HUAWEI-SECURITY-IPSEC-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| huawei | 1.3.6.1.4.1.2011 | |||
| huaweiUtility | 1.3.6.1.4.1.2011.6 | |||
| hwSecurity | 1.3.6.1.4.1.2011.6.122 | |||
| hwIpsec | 1.3.6.1.4.1.2011.6.122.26 |
V1.00 The IPSec mib is for Eudemon and USG product series. |
||
| hwIPSecGlobalStats | 1.3.6.1.4.1.2011.6.122.26.1 | |||
| hwIPSecGlobalTotal | 1.3.6.1.4.1.2011.6.122.26.1.1 | gauge32 | read-only |
Total number of IPSec tunnels. |
| hwIPSecGlobalPacketInput | 1.3.6.1.4.1.2011.6.122.26.1.2 | counter64 | read-only |
Number of received security packets. |
| hwIPSecGlobalPacketOutput | 1.3.6.1.4.1.2011.6.122.26.1.3 | counter64 | read-only |
Number of sent security packets. |
| hwIPSecGlobalByteInput | 1.3.6.1.4.1.2011.6.122.26.1.4 | counter64 | read-only |
Number of bytes of received security packets. |
| hwIPSecGlobalByteOutput | 1.3.6.1.4.1.2011.6.122.26.1.5 | counter64 | read-only |
Number of bytes of sent security packets. |
| hwIPSecGlobalDroppedPacketInput | 1.3.6.1.4.1.2011.6.122.26.1.6 | counter64 | read-only |
Number of discarded packets that are received. |
| hwIPSecGlobalDroppedPacketOutput | 1.3.6.1.4.1.2011.6.122.26.1.7 | counter64 | read-only |
Number of discarded packets that are sent. |
| hwIPSecGlobalEncIntactPacket | 1.3.6.1.4.1.2011.6.122.26.1.8 | counter64 | read-only |
Number of packets that do not need to be fragmented. |
| hwIPSecGlobalEncPacketFirstSlice | 1.3.6.1.4.1.2011.6.122.26.1.9 | counter64 | read-only |
Number of initial packets to be encrypted. |
| hwIPSecGlobalEncPacketAfterSlice | 1.3.6.1.4.1.2011.6.122.26.1.10 | counter64 | read-only |
Number of follow-up packets to be encrypted. |
| hwIPSecGlobalDecPacketReassFirstSlice | 1.3.6.1.4.1.2011.6.122.26.1.11 | counter64 | read-only |
Number of initial packets that are fragmented and assembled. |
| hwIPSecGlobalDecPacketReassAfterSlice | 1.3.6.1.4.1.2011.6.122.26.1.12 | counter64 | read-only |
Number of follow-up packets that are fragmented and assembled. |
| hwIPSecGlobalDecPacketReassLenErr | 1.3.6.1.4.1.2011.6.122.26.1.13 | counter64 | read-only |
Number of packets with incorrect length during reassembling. |
| hwIPSecGlobalPacketHeaderWrong | 1.3.6.1.4.1.2011.6.122.26.1.14 | counter64 | read-only |
Number of discarded packets caused by the packet header error. |
| hwIPSecGlobalMemoryApplyFail | 1.3.6.1.4.1.2011.6.122.26.1.15 | counter64 | read-only |
Number of discarded packets caused by memory applying failure. |
| hwIPSecGlobalCannotFindSA | 1.3.6.1.4.1.2011.6.122.26.1.16 | counter64 | read-only |
Number of discarded packets caused by no matched security associations. |
| hwIPSecGlobalWrongSA | 1.3.6.1.4.1.2011.6.122.26.1.17 | counter64 | read-only |
Number of discarded packets caused by incorrect security associations. |
| hwIPSecGlobalBadAuthentication | 1.3.6.1.4.1.2011.6.122.26.1.18 | counter64 | read-only |
Number of discarded packets caused by the authentication failure. |
| hwIPSecGlobalReplay | 1.3.6.1.4.1.2011.6.122.26.1.19 | counter64 | read-only |
Number of discarded packets caused by the packet replay. |
| hwIPSecGlobalPreRecheckErr | 1.3.6.1.4.1.2011.6.122.26.1.20 | counter64 | read-only |
Number of discarded packets caused by the pre-check failure. |
| hwIPSecGlobalPostRecheckErr | 1.3.6.1.4.1.2011.6.122.26.1.21 | counter64 | read-only |
Number of discarded packets caused by the post-check failure |
| hwIPSecGlobalExceedByteLimit | 1.3.6.1.4.1.2011.6.122.26.1.22 | counter64 | read-only |
Number of discarded packets caused by the exceeding of the byte limit. |
| hwIPSecGlobalExceedPacketLimit | 1.3.6.1.4.1.2011.6.122.26.1.23 | counter64 | read-only |
Number of discarded packets caused by the exceeding of the packet limit. |
| hwIPSecGlobalProcessIpv4Err | 1.3.6.1.4.1.2011.6.122.26.1.24 | counter64 | read-only |
Number of discarded packets caused by the plain-text forwarding failure. |
| hwIPSecGlobalFibSearchErr | 1.3.6.1.4.1.2011.6.122.26.1.25 | counter64 | read-only |
Number of discarded packets caused by the route check failure. |
| hwIPSecGlobalIKEInboundOK | 1.3.6.1.4.1.2011.6.122.26.1.26 | counter64 | read-only |
Number of received IKE negotiation packets that successfully enter the queue. |
| hwIPSecGlobalIKEInboundErr | 1.3.6.1.4.1.2011.6.122.26.1.27 | counter64 | read-only |
Number of received IKE negotiation packets that fail to enter the queue. |
| hwIPSecGlobalIKEOutboundOK | 1.3.6.1.4.1.2011.6.122.26.1.28 | counter64 | read-only |
Number of sent IKE negotiation packets that successfully enter the queue. |
| hwIPSecGlobalIKEOutboundErr | 1.3.6.1.4.1.2011.6.122.26.1.29 | counter64 | read-only |
Number of sent IKE negotiation packets that fail to enter the queue. |
| hwIPSecGlobalSoftExpr | 1.3.6.1.4.1.2011.6.122.26.1.30 | counter64 | read-only |
Soft timeout times. |
| hwIPSecGlobalHardExpr | 1.3.6.1.4.1.2011.6.122.26.1.31 | counter64 | read-only |
Hard timeout times. |
| hwIPSecGlobalDPDOper | 1.3.6.1.4.1.2011.6.122.26.1.32 | counter64 | read-only |
DPD operation and detection times. |
| hwIPSecGlobalModpCnt | 1.3.6.1.4.1.2011.6.122.26.1.33 | counter64 | read-only |
Modular exponentiation calculation. |
| hwIPSecGlobalSaeSucc | 1.3.6.1.4.1.2011.6.122.26.1.34 | counter64 | read-only |
SAE computing success. |
| hwIPSecGlobalSoftwareSucc | 1.3.6.1.4.1.2011.6.122.26.1.35 | counter64 | read-only |
Software computing success. |
| hwIPSecTunnelConfigTable | 1.3.6.1.4.1.2011.6.122.26.2 | no-access |
This table specifies the configuration attributes for Huawei IPSec tunnel. |
|
| 1.3.6.1.4.1.2011.6.122.26.2.1 | no-access |
Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring configuration parameters associated with an instance of IPSec tunnel. |
||
| hwIPSecIfIndex | 1.3.6.1.4.1.2011.6.122.26.2.1.1 | gauge32 | no-access |
Index of the router interface corresponding to the IPSec tunnel. |
| hwIPSecTunnelPolicyNum | 1.3.6.1.4.1.2011.6.122.26.2.1.2 | gauge32 | no-access |
ID of the ACL rule in the current IPSec policy. |
| hwIPSecTunnelIndex | 1.3.6.1.4.1.2011.6.122.26.2.1.3 | gauge32 | no-access |
Index of the IPSec tunnel. |
| hwIPSecTunnelRuleId | 1.3.6.1.4.1.2011.6.122.26.2.1.4 | gauge32 | read-only |
ID of the ACL rule in the current IPSec policy. |
| hwIPSecTunnelDstIP | 1.3.6.1.4.1.2011.6.122.26.2.1.5 | ipaddress | read-only |
Destination IP address of the tunnel (peer end). |
| hwIPSecTunnelInsideIP | 1.3.6.1.4.1.2011.6.122.26.2.1.6 | ipaddress | read-only |
Intranet IP address of the peer end during remote access. |
| hwIPSecTunnelRemotePort | 1.3.6.1.4.1.2011.6.122.26.2.1.7 | gauge32 | read-only |
Port number of the peer end of the tunnel. |
| hwIPSecTunnelCpuID | 1.3.6.1.4.1.2011.6.122.26.2.1.8 | gauge32 | read-only |
CPU ID of the tunnel. |
| hwIPSecTunnelEncapMode | 1.3.6.1.4.1.2011.6.122.26.2.1.9 | integer | read-only |
Encapsulation mode of the tunnel (tunneling mode or transmission mode). Enumeration: 'tunnel': 0, 'transport': 1. |
| hwIPSecTunnelNatTraver | 1.3.6.1.4.1.2011.6.122.26.2.1.10 | integer | read-only |
Whether the tunnel needs NAT traversal (If yes, the value is 1.). Enumeration: 'nat-traversal': 1, 'no-nat-traversal': 0. |
| hwIPSecTunnelFromIKEV2 | 1.3.6.1.4.1.2011.6.122.26.2.1.11 | integer | read-only |
Whether the tunnel adopts IKEv2 (If yes, the value is 1.). Enumeration: 'no-ikev2': 0, 'ikev2': 1. |
| hwIPSecTunnelEncryptMode | 1.3.6.1.4.1.2011.6.122.26.2.1.12 | gauge32 | read-only |
Encryption mode of the tunnel. |
| hwIPSecTunnelESPDigestMode | 1.3.6.1.4.1.2011.6.122.26.2.1.13 | gauge32 | read-only |
ESP check mode of the tunnel. |
| hwIPSecTunnelAHDigestMode | 1.3.6.1.4.1.2011.6.122.26.2.1.14 | gauge32 | read-only |
AH check mode of the tunnel. |
| hwIPSecTunnelProto | 1.3.6.1.4.1.2011.6.122.26.2.1.15 | gauge32 | read-only |
Protocol of the tunnel (ESP or AH, or both). |
| hwIPSecTunnelOutPortIndex | 1.3.6.1.4.1.2011.6.122.26.2.1.16 | gauge32 | read-only |
Index of the egress of the tunnel. |
| hwIPSecTunnelSrcPort | 1.3.6.1.4.1.2011.6.122.26.2.1.17 | gauge32 | read-only |
Indicates the source port number if NAT traversal is adopted. |
| hwIPSecTunnelDstPort | 1.3.6.1.4.1.2011.6.122.26.2.1.18 | gauge32 | read-only |
Indicates the destination port number if NAT traversal is adopted. |
| hwIPSecTunnelVrfIndex | 1.3.6.1.4.1.2011.6.122.26.2.1.19 | gauge32 | read-only |
VPN ID protected by the tunnel. |
| hwIPSecTunnelIfVrfIndex | 1.3.6.1.4.1.2011.6.122.26.2.1.20 | gauge32 | read-only |
VPN ID of the sending interface of the tunnel. |
| hwIPSecTunnelSrcIP | 1.3.6.1.4.1.2011.6.122.26.2.1.21 | ipaddress | read-only |
Source IP address of the tunnel (local end). |
| hwIPSecTunnelSpeedLimitIn | 1.3.6.1.4.1.2011.6.122.26.2.1.22 | gauge32 | read-only |
Rate limiting pre-configured in the incoming direction. |
| hwIPSecTunnelSpeedLimitOut | 1.3.6.1.4.1.2011.6.122.26.2.1.23 | gauge32 | read-only |
Rate limiting pre-configured in the outgoing direction. |
| hwIPSecTunnelInitiator | 1.3.6.1.4.1.2011.6.122.26.2.1.24 | integer | read-only |
Initiator or responder of the IPSec tunnel. Enumeration: 'responder': 0, 'ikev1-initiator': 2, 'ikev2-initiator': 1. |
| hwIPSecTunnelLifeSize | 1.3.6.1.4.1.2011.6.122.26.2.1.25 | gauge32 | read-only |
Life cycle of the IPSec tunnel (in kbytes). |
| hwIPSecTunnelLifeTime | 1.3.6.1.4.1.2011.6.122.26.2.1.26 | gauge32 | read-only |
Life cycle of the IPSec tunnel (in seconds). |
| hwIPSecTunnelPolicyName | 1.3.6.1.4.1.2011.6.122.26.2.1.27 | octet string | read-only |
Security policy for the IPSec tunnel. |
| hwIPSecTunnelSaStatus | 1.3.6.1.4.1.2011.6.122.26.2.1.28 | integer | read-only |
Status of the SA. Enumeration: 'free': 0, 'ocuppied': 1. |
| hwIPSecTunnelStatsTable | 1.3.6.1.4.1.2011.6.122.26.3 | no-access |
This table specifies the status attributes for Huawei IPSec tunnel. |
|
| 1.3.6.1.4.1.2011.6.122.26.3.1 | no-access |
Each entry in the hwIPSecTunnelConfigTable holds a set of monitoring status parameters associated with an instance of IPSec tunnel. |
||
| hwIPSecTunnelSaIDIn | 1.3.6.1.4.1.2011.6.122.26.3.1.1 | gauge32 | read-only |
Index of the incoming IPSec tunnel. |
| hwIPSecTunnelSaIDOut | 1.3.6.1.4.1.2011.6.122.26.3.1.2 | gauge32 | read-only |
Index of the outgoing IPSec tunnel. |
| hwIPSecTunnelFlowSoftExpireIn | 1.3.6.1.4.1.2011.6.122.26.3.1.3 | gauge32 | read-only |
Incoming soft timeout traffic (in bytes). |
| hwIPSecTunnelFlowSoftExpireOut | 1.3.6.1.4.1.2011.6.122.26.3.1.4 | gauge32 | read-only |
Outgoing soft timeout traffic (in bytes). |
| hwIPSecTunnelFlowHardExpireIn | 1.3.6.1.4.1.2011.6.122.26.3.1.5 | gauge32 | read-only |
Incoming hard timeout traffic (in bytes). |
| hwIPSecTunnelFlowHardExpireOut | 1.3.6.1.4.1.2011.6.122.26.3.1.6 | gauge32 | read-only |
Outgoing hard timeout traffic (in bytes). |
| hwIPSecTunnelRemainTime | 1.3.6.1.4.1.2011.6.122.26.3.1.7 | gauge32 | read-only |
Remaining time of the IPSec tunnel (in seconds). |
| hwIPSecTunnelRemainSize | 1.3.6.1.4.1.2011.6.122.26.3.1.8 | gauge32 | read-only |
Remaining bytes of the IPSec tunnel (in kbytes). |
| hwIPSecTunnelSpiIn | 1.3.6.1.4.1.2011.6.122.26.3.1.9 | gauge32 | read-only |
Incoming SPI. |
| hwIPSecTunnelSpiOut | 1.3.6.1.4.1.2011.6.122.26.3.1.10 | gauge32 | read-only |
Outgoing SPI. |
| hwIPSecTunnelInSideSpiIn | 1.3.6.1.4.1.2011.6.122.26.3.1.11 | gauge32 | read-only |
SPI of the internal ESP header when both AH and ESP are adopted in the incoming direction. |
| hwIPSecTunnelInSideSpiOut | 1.3.6.1.4.1.2011.6.122.26.3.1.12 | gauge32 | read-only |
SPI of the internal ESP header when both AH and ESP are adopted in the outgoing direction. |
| hwIPSecTunnelESPSequenceNumberIn | 1.3.6.1.4.1.2011.6.122.26.3.1.13 | gauge32 | read-only |
Serial number of the incoming ESP protocol. |
| hwIPSecTunnelESPSequenceNumberOut | 1.3.6.1.4.1.2011.6.122.26.3.1.14 | gauge32 | read-only |
Serial number of the outgoing ESP protocol. |
| hwIPSecTunnellAHSequenceNumberIn | 1.3.6.1.4.1.2011.6.122.26.3.1.15 | gauge32 | read-only |
Serial number of the incoming AH protocol. |
| hwIPSecTunnellAHSequenceNumberOut | 1.3.6.1.4.1.2011.6.122.26.3.1.16 | gauge32 | read-only |
Serial number of the outgoing AH protocol. |
| hwIPSecTunnelMemApplyFail | 1.3.6.1.4.1.2011.6.122.26.3.1.17 | counter64 | read-only |
Number of discarded packets because packets to be encrypted are too long. |
| hwIPSecTunnelBadAuth | 1.3.6.1.4.1.2011.6.122.26.3.1.18 | counter64 | read-only |
Number of discarded packets caused by the authentication failure of received packets. |
| hwIPSecTunnelReplay | 1.3.6.1.4.1.2011.6.122.26.3.1.19 | counter64 | read-only |
Number of discarded packets caused by receiving replayed packets. |
| hwIPSecTunnelAfterReCheckErr | 1.3.6.1.4.1.2011.6.122.26.3.1.20 | counter64 | read-only |
Number of discarded packets caused by the decryption post-check failure. |
| hwIPSecTunnelPktDropByteLimitIn | 1.3.6.1.4.1.2011.6.122.26.3.1.21 | counter64 | read-only |
Number of discarded packets caused by the exceeding the byte limit in the incoming direction. |
| hwIPSecTunnelPktDropByteLimitOut | 1.3.6.1.4.1.2011.6.122.26.3.1.22 | counter64 | read-only |
Number of discarded packets caused by the exceeding of the byte limit in the outgoing direction. |
| hwIPSecTunnelFIBSearchErr | 1.3.6.1.4.1.2011.6.122.26.3.1.23 | counter64 | read-only |
Number of discarded packets caused by the route check failure. |
| hwIPSecSaStatisticTable | 1.3.6.1.4.1.2011.6.122.26.4 | no-access |
This table specifies the SA numbers of policies which have been bound with interfaces. |
|
| 1.3.6.1.4.1.2011.6.122.26.4.1 | no-access |
. |
||
| hwIPSecSaStatisticTunnelPolicyName | 1.3.6.1.4.1.2011.6.122.26.4.1.1 | octet string | read-only |
Security policy for the IPSec tunnel. |
| hwIPSecSaStatisticSaInCnt | 1.3.6.1.4.1.2011.6.122.26.4.1.2 | gauge32 | read-only |
Incoming SA number. |
| hwIPSecSaStatisticSaOutCnt | 1.3.6.1.4.1.2011.6.122.26.4.1.3 | gauge32 | read-only |
Outgoing SA number. |
| hwIPSecTrapObject | 1.3.6.1.4.1.2011.6.122.26.5 | |||
| hwIPSecTrapTunnelPolicyNum | 1.3.6.1.4.1.2011.6.122.26.5.1 | gauge32 | no-access |
ID of the ACL rule in the current IPSec policy. |
| hwIPSecTrapIfIndex | 1.3.6.1.4.1.2011.6.122.26.5.2 | gauge32 | no-access |
Index of the router interface corresponding to the IPSec tunnel. |
| hwIPSecTrapTunnelPolicyName | 1.3.6.1.4.1.2011.6.122.26.5.3 | octet string | no-access |
Security policy for the IPSec tunnel. |
| hwIPSecNotifications | 1.3.6.1.4.1.2011.6.122.26.6 | |||
| hwIPSecTunnelStart | 1.3.6.1.4.1.2011.6.122.26.6.1 |
Send the message when the IPSec tunnel is established. |
||
| hwIPSecTunnelStop | 1.3.6.1.4.1.2011.6.122.26.6.2 |
Send the message when the IPSec tunnel is deleted. |
||
| hwIPSecPolicyAdd | 1.3.6.1.4.1.2011.6.122.26.6.3 |
Send the message when an IPSec policy is added. |
||
| hwIPSecPolicyDel | 1.3.6.1.4.1.2011.6.122.26.6.4 |
Send the message when an IPSec policy is deleted. |
||
| hwIPSecPolicyAttach | 1.3.6.1.4.1.2011.6.122.26.6.5 |
Send the message when an IPSec policy is applied to an interface. |
||
| hwIPSecPolicyDetach | 1.3.6.1.4.1.2011.6.122.26.6.6 |
Send the message when an IPSec policy is cancelled on an interface. |
||
| hwIPSecIKEReset | 1.3.6.1.4.1.2011.6.122.26.6.7 |
Send the message when an IKE SA is reset . |
||
| hwIPSecIPSecReset | 1.3.6.1.4.1.2011.6.122.26.6.8 |
Send the message when an IPSec SA is reset . |
||
| hwIPSecSaReachMax | 1.3.6.1.4.1.2011.6.122.26.6.9 |
Send the message when IPSec SA Number will Be Reach Max . |
||
| hwIPSecSaReachMaxAtOnce | 1.3.6.1.4.1.2011.6.122.26.6.10 |
Send the message when IPSec SA Number Reach Max At Once. |
||
| hwIKESaReachMax | 1.3.6.1.4.1.2011.6.122.26.6.11 |
Send the message when IKE SA Number will Be Reach Max . |
||
| hwIKESaReachMaxAtOnce | 1.3.6.1.4.1.2011.6.122.26.6.12 |
Send the message when IKE SA Number will Be Reach Max . |
||
| hwIPSecMibConformance | 1.3.6.1.4.1.2011.6.122.26.7 | |||
| hwIPSecMibCompliances | 1.3.6.1.4.1.2011.6.122.26.7.1 | |||
| hwIPSecMibCompliance | 1.3.6.1.4.1.2011.6.122.26.7.1.1 |
|
||
| hwIPSecMibGroups | 1.3.6.1.4.1.2011.6.122.26.7.2 | |||
| hwIPSecGlobalStatsGroup | 1.3.6.1.4.1.2011.6.122.26.7.2.1 |
This table specifies the global statistics information for Huawei IPSec tunnel. |
||
| hwIPSecTunnelConfigTableGroup | 1.3.6.1.4.1.2011.6.122.26.7.2.2 |
This table specifies the monitoring IPSec tunnel configuration attributes for Huawei IPSec tunnel. |
||
| hwIPSecTunnelStatsTableGroup | 1.3.6.1.4.1.2011.6.122.26.7.2.3 |
This table specifies the monitoring IPSec tunnel statistics attributes for Huawei IPSec tunnel. |
||
| hwIPSecSaStatisticTableGroup | 1.3.6.1.4.1.2011.6.122.26.7.2.4 |
This table specifies the SA numbers of policies which have been bound with interfaces. |
||
| hwIPSecTrapObjectGroup | 1.3.6.1.4.1.2011.6.122.26.7.2.5 |
IPSec trap objects. |
||
| hwIPSecNotificationsGroup | 1.3.6.1.4.1.2011.6.122.26.7.2.6 |
IPSec traps. |
||