HUAWEI-OSPFV3-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-OSPFV3-MIB
Download as:   
SNMPv2-CONF, IF-MIB, OSPF-MIB, SNMPv2-SMI, HUAWEI-MIB, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwOspfv3 1.3.6.1.4.1.2011.5.25.147
The MIB module for OSPF version 3. Copyright (C) The Internet Society (2006). This version of this MIB module is part of RFC draft-ietf-ospf-ospfv3-mib-11; see the RFC itself for full legal notices.
         hwOspfv3Notifications 1.3.6.1.4.1.2011.5.25.147.0
             hwOspfv3VirtIfStateChange 1.3.6.1.4.1.2011.5.25.147.0.1
An ospfv3VirtIfStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual interface. This notification should be generated when the interface state regresses (e.g., goes from Point-to-Point to Down) or progresses to a terminal state (i.e., Point-to-Point).
             hwOspfv3NbrStateChange 1.3.6.1.4.1.2011.5.25.147.0.2
An ospfv3NbrStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 neighbor. This notification should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., 2-Way or Full). When an neighbor transitions from or to Full on non-broadcast multi-access and broadcast networks, the notification should be generated by the designated router. A designated router transitioning to Down will be noted by ospfIfStateChange.
             hwOspfv3VirtNbrStateChange 1.3.6.1.4.1.2011.5.25.147.0.3
An ospfv3VirtNbrStateChange notification signifies that there has been a change in the state of an OSPFv3 virtual neighbor. This notification should be generated when the neighbor state regresses (e.g., goes from Attempt or Full to 1-Way or Down) or progresses to a terminal state (e.g., Full).
             hwOspfv3IfConfigError 1.3.6.1.4.1.2011.5.25.147.0.4
An ospfv3IfConfigError notification signifies that a packet has been received on a non-virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a notification only if it prevents an adjacency from forming.
             hwOspfv3VirtIfConfigError 1.3.6.1.4.1.2011.5.25.147.0.5
An ospfv3VirtIfConfigError notification signifies that a packet has been received on a virtual interface from a router whose configuration parameters conflict with this router's configuration parameters. Note that the event optionMismatch should cause a notification only if it prevents an adjacency from forming.
             hwOspfv3IfRxBadPacket 1.3.6.1.4.1.2011.5.25.147.0.6
An ospfv3IfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a non-virtual interface.
             hwOspfv3VirtIfRxBadPacket 1.3.6.1.4.1.2011.5.25.147.0.7
An ospfv3VirtIfRxBadPacket notification signifies that an OSPFv3 packet that cannot be parsed has been received on a virtual interface.
             hwOspfv3IfStateChange 1.3.6.1.4.1.2011.5.25.147.0.8
An ospfv3IfStateChange notification signifies that there has been a change in the state of a non-virtual OSPFv3 interface. This notification should be generated when the interface state regresses (e.g., goes from Dr to Down) or progresses to a terminal state (i.e., Point-to-Point, DR Other, Dr, or Backup).
             hwOspfv3RestartStatusChange 1.3.6.1.4.1.2011.5.25.147.0.9
An ospfv3RestartStatusChange notification signifies that there has been a change in the graceful restart state for the router. This notification should be generated when the router restart status changes.
             hwOspfv3NbrRestartHelperStatusChange 1.3.6.1.4.1.2011.5.25.147.0.10
An ospfv3NbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the neighbor. This notification should be generated when the neighbor restart helper status transitions for a neighbor.
             hwOspfv3VirtNbrRestartHelperStatusChange 1.3.6.1.4.1.2011.5.25.147.0.11
An ospfv3VirtNbrRestartHelperStatusChange notification signifies that there has been a change in the graceful restart helper state for the virtual neighbor. This notification should be generated when the virtual neighbor restart helper status transitions for a virtual neighbor.
             hwOspfv3NssaTranslatorStatusChange 1.3.6.1.4.1.2011.5.25.147.0.12
An ospfv3NssaTranslatorStatusChange notification indicates that there has been a change in the router's ability to translate OSPFv3 NSSA LSAs into OSPFv3 External LSAs. This notification should be generated when the Translator Status transitions from or to any defined status on a per area basis.
             hwOspfv3LastAuthKeyExpiry 1.3.6.1.4.1.2011.5.25.147.0.13
An hwOspfv3LastAuthKeyExpiry notification indicates that the last key associated with an interface has expired. When this notification is received, either the lifetime of the key should be extended or a new key should be configured.
             hwOspfv3AuthSequenceNumWrap 1.3.6.1.4.1.2011.5.25.147.0.14
An hwOspfv3AuthSequenceNumWrap notification indicates that the 64-bit authentication sequence number has wrapped. When this notification is received, all the keys must be reset to avoid the possibility of replay attacks.
             hwOspfv3IntraAreaRouterIdConflictRecovered 1.3.6.1.4.1.2011.5.25.147.0.15
The object is used to monitor router ID conflict recovery in an intra area.
         hwOspfv3Objects 1.3.6.1.4.1.2011.5.25.147.1
             hwOspfv3GeneralGroup 1.3.6.1.4.1.2011.5.25.147.1.1
                 hwOspfv3RouterId 1.3.6.1.4.1.2011.5.25.147.1.1.1 hwospfv3routeridtc read-write
A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router.
                 hwOspfv3AdminStatus 1.3.6.1.4.1.2011.5.25.147.1.1.2 status read-write
The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interfaces.
                 hwOspfv3VersionNumber 1.3.6.1.4.1.2011.5.25.147.1.1.3 integer read-only
The version number of OSPF for IPv6 is 3. Enumeration: 'version3': 3.
                 hwOspfv3AreaBdrRtrStatus 1.3.6.1.4.1.2011.5.25.147.1.1.4 truthvalue read-only
A flag to note whether this router is an area border router.
                 hwOspfv3AsBdrRtrStatus 1.3.6.1.4.1.2011.5.25.147.1.1.5 truthvalue read-write
A flag to note whether this router is configured as an Autonomous System border router.
                 hwOspfv3AsScopeLsaCount 1.3.6.1.4.1.2011.5.25.147.1.1.6 gauge32 read-only
The number of AS-Scope (e.g. AS-External) link state advertisements in the link state database.
                 hwOspfv3AsScopeLsaCksumSum 1.3.6.1.4.1.2011.5.25.147.1.1.7 unsigned32 read-only
The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers.
                 hwOspfv3OriginateNewLsas 1.3.6.1.4.1.2011.5.25.147.1.1.8 counter32 read-only
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
                 hwOspfv3RxNewLsas 1.3.6.1.4.1.2011.5.25.147.1.1.9 counter32 read-only
The number of link state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements.
                 hwOspfv3ExtLsaCount 1.3.6.1.4.1.2011.5.25.147.1.1.10 gauge32 read-only
The number of AS-Scope External(LS type 0x4005) link state advertisements in the link state database
                 hwOspfv3ExtAreaLsdbLimit 1.3.6.1.4.1.2011.5.25.147.1.1.11 integer32 read-write
The maximum number of non-default AS-external-LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfv3ExtAreaLsdbLimit, the router enters Overflow state. The router never holds more than ospfv3ExtAreaLsdbLimit non-default AS-external-LSAs in its database. Ospfv3ExtAreaLsdbLimit MUST be set identically in all routers attached to the OSPFv3 backbone and/or any regular OSPFv3 area. (i.e., OSPFv3 stub areas and NSSAs are excluded).
                 hwOspfv3RestartSupport 1.3.6.1.4.1.2011.5.25.147.1.1.12 integer read-write
The router's support for OSPFv3 Graceful restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts. Enumeration: 'plannedAndUnplanned': 3, 'none': 1, 'plannedOnly': 2.
                 hwOspfv3RestartInterval 1.3.6.1.4.1.2011.5.25.147.1.1.13 hwospfv3uptorefreshintervaltc read-write
Configured OSPFv3 Graceful restart timeout interval.
                 hwOspfv3RestartStatus 1.3.6.1.4.1.2011.5.25.147.1.1.14 integer read-only
The current status of OSPFv3 Graceful restart capability. Enumeration: 'unplannedRestart': 3, 'notRestarting': 1, 'plannedRestart': 2.
                 hwOspfv3RestartAge 1.3.6.1.4.1.2011.5.25.147.1.1.15 hwospfv3uptorefreshintervaltc read-only
Remaining time in current OSPFv3 Graceful restart interval.
                 hwOspfv3RestartExitRc 1.3.6.1.4.1.2011.5.25.147.1.1.16 integer read-only
Describes the outcome of the last attempt at a Graceful restart. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed successfully. timedOut:........the last restart timed out. topologyChanged:.the last restart was aborted due to a topology change. Enumeration: 'none': 1, 'timedOut': 4, 'completed': 3, 'inProgress': 2, 'topologyChanged': 5.
                 hwOspfv3NotificationEnable 1.3.6.1.4.1.2011.5.25.147.1.1.17 truthvalue read-write
If this object is set to true(1), then it enables the generation of OSPFv3 Notifications. If it is set to false(2), these notifications are not generated. Configured values MUST survive an agent reboot.
                 hwOspfv3ReferenceBandwidth 1.3.6.1.4.1.2011.5.25.147.1.1.18 unsigned32 read-write
Reference bandwidth in kilobits per second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS). This object is persistent, and when written, the entity SHOULD save the change to non-volatile storage.
             hwOspfv3AreaTable 1.3.6.1.4.1.2011.5.25.147.1.2 no-access
Information describing the configured parameters and cumulative statistics of the router's attached areas.
                 hwOspfv3AreaEntry 1.3.6.1.4.1.2011.5.25.147.1.2.1 no-access
Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
                     hwOspfv3AreaId 1.3.6.1.4.1.2011.5.25.147.1.2.1.1 hwospfv3areaidtc no-access
A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.
                     hwOspfv3AreaImportAsExtern 1.3.6.1.4.1.2011.5.25.147.1.2.1.2 integer read-only
Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as NSSA LSAs which have Area-scope Enumeration: 'importExternal': 1, 'importNoExternal': 2, 'importNssa': 3.
                     hwOspfv3AreaSpfRuns 1.3.6.1.4.1.2011.5.25.147.1.2.1.3 counter32 read-only
The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm.
                     hwOspfv3AreaBdrRtrCount 1.3.6.1.4.1.2011.5.25.147.1.2.1.4 gauge32 read-only
The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
                     hwOspfv3AreaAsBdrRtrCount 1.3.6.1.4.1.2011.5.25.147.1.2.1.5 gauge32 read-only
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
                     hwOspfv3AreaScopeLsaCount 1.3.6.1.4.1.2011.5.25.147.1.2.1.6 gauge32 read-only
The total number of Area-Scope link state advertisements in this area's link state database.
                     hwOspfv3AreaScopeLsaCksumSum 1.3.6.1.4.1.2011.5.25.147.1.2.1.7 unsigned32 read-only
The 32-bit unsigned sum of the Area-Scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state database of two routers.
                     hwOspfv3AreaSummary 1.3.6.1.4.1.2011.5.25.147.1.2.1.8 integer read-only
The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub or NSSA area. It will rely entirely on its default route. If it is sendAreaSummary, the router will both summarize and propagate Inter-Area LSAs. Enumeration: 'sendAreaSummary': 2, 'noAreaSummary': 1.
                     hwOspfv3AreaRowStatus 1.3.6.1.4.1.2011.5.25.147.1.2.1.9 rowstatus read-only
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
                     hwOspfv3AreaStubMetric 1.3.6.1.4.1.2011.5.25.147.1.2.1.10 bigmetric read-only
The metric value advertised for the default route into Stub and NSSA areas.
                     hwOspfv3AreaNssaTranslatorRole 1.3.6.1.4.1.2011.5.25.147.1.2.1.11 integer read-only
Indicates an NSSA border router's policy to perform NSSA translation of NSSA-LSAs into AS-External-LSAs. Enumeration: 'always': 1, 'candidate': 2.
                     hwOspfv3AreaNssaTranslatorState 1.3.6.1.4.1.2011.5.25.147.1.2.1.12 integer read-only
Indicates if and how an NSSA border router is performing NSSA translation of NSSA-LSAs into AS-External-LSAs. When this object is set to 'enabled', the NSSA border router's ospfv3AreaNssaTranslatorRole has been set to 'always'. When this object is set to 'elected', a candidate NSSA border router is translating NSSA-LSAs into AS-External-LSAs. When this object is set to 'disabled', a candidate NSSA Border router is NOT translating NSSA-LSAs into AS-External-LSAs. Enumeration: 'disabled': 3, 'elected': 2, 'enabled': 1.
                     hwOspfv3AreaNssaTranslatorStabInterval 1.3.6.1.4.1.2011.5.25.147.1.2.1.13 unsigned32 read-only
The stability interval defined as the number of seconds after an elected translator determines its services are no longer required that it should continue to perform its translation duties.
                     hwOspfv3AreaNssaTranslatorEvents 1.3.6.1.4.1.2011.5.25.147.1.2.1.14 counter32 read-only
Indicates the number of Translator state changes that have occurred since the last start-up of the OSPFv3 routing process. Discontinuities in the value of this counter can occur at re-initialization of the management system and at other times as indicated by the value of ospfv3DiscontinuityTime.
             hwOspfv3AsLsdbTable 1.3.6.1.4.1.2011.5.25.147.1.3 no-access
The OSPFv3 Process's AS-Scope Link State Database.
                 hwOspfv3AsLsdbEntry 1.3.6.1.4.1.2011.5.25.147.1.3.1 no-access
A single AS-Scope Link State Advertisement.
                     hwOspfv3AsLsdbType 1.3.6.1.4.1.2011.5.25.147.1.3.1.1 unsigned32 no-access
The type of the link state advertisement. Each link state type has a separate advertisement format. AS-Scope LSAs not recognized by the router may be stored in the database.
                     hwOspfv3AsLsdbRouterId 1.3.6.1.4.1.2011.5.25.147.1.3.1.2 hwospfv3routeridtc no-access
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                     hwOspfv3AsLsdbLsId 1.3.6.1.4.1.2011.5.25.147.1.3.1.3 unsigned32 no-access
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
                     hwOspfv3AsLsdbSequence 1.3.6.1.4.1.2011.5.25.147.1.3.1.4 hwospfv3lsasequencetc read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                     hwOspfv3AsLsdbAge 1.3.6.1.4.1.2011.5.25.147.1.3.1.5 hwospfv3lsaagetc read-only
This field is the age of the link state advertisement in seconds.
                     hwOspfv3AsLsdbChecksum 1.3.6.1.4.1.2011.5.25.147.1.3.1.6 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                     hwOspfv3AsLsdbAdvertisement 1.3.6.1.4.1.2011.5.25.147.1.3.1.7 octet string read-only
The entire Link State Advertisement, including its header.
                     hwOspfv3AsLsdbTypeKnown 1.3.6.1.4.1.2011.5.25.147.1.3.1.8 truthvalue read-only
Indicates whether the LSA type is recognized by this Router.
             hwOspfv3AreaLsdbTable 1.3.6.1.4.1.2011.5.25.147.1.4 no-access
The OSPFv3 Process's Area-Scope Link State Database.
                 hwOspfv3AreaLsdbEntry 1.3.6.1.4.1.2011.5.25.147.1.4.1 no-access
A single Area-Scope Link State Advertisement.
                     hwOspfv3AreaLsdbAreaId 1.3.6.1.4.1.2011.5.25.147.1.4.1.1 hwospfv3areaidtc no-access
The 32-bit identifier of the Area from which the LSA was received.
                     hwOspfv3AreaLsdbType 1.3.6.1.4.1.2011.5.25.147.1.4.1.2 unsigned32 no-access
The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs unrecognized by the router are also stored in this database.
                     hwOspfv3AreaLsdbRouterId 1.3.6.1.4.1.2011.5.25.147.1.4.1.3 hwospfv3routeridtc no-access
The 32-bit number that uniquely identifies the originating router in the Autonomous System.
                     hwOspfv3AreaLsdbLsId 1.3.6.1.4.1.2011.5.25.147.1.4.1.4 unsigned32 no-access
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
                     hwOspfv3AreaLsdbSequence 1.3.6.1.4.1.2011.5.25.147.1.4.1.5 hwospfv3lsasequencetc read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                     hwOspfv3AreaLsdbAge 1.3.6.1.4.1.2011.5.25.147.1.4.1.6 hwospfv3lsaagetc read-only
This field is the age of the link state advertisement in seconds.
                     hwOspfv3AreaLsdbChecksum 1.3.6.1.4.1.2011.5.25.147.1.4.1.7 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                     hwOspfv3AreaLsdbAdvertisement 1.3.6.1.4.1.2011.5.25.147.1.4.1.8 octet string read-only
The entire Link State Advertisement, including its header.
                     hwOspfv3AreaLsdbTypeKnown 1.3.6.1.4.1.2011.5.25.147.1.4.1.9 truthvalue read-only
Indicates whether the LSA type is recognized by this Router.
             hwOspfv3LinkLsdbTable 1.3.6.1.4.1.2011.5.25.147.1.5 no-access
The OSPFv3 Process's Link-Scope Link State Database.
                 hwOspfv3LinkLsdbEntry 1.3.6.1.4.1.2011.5.25.147.1.5.1 no-access
A single Link-Scope Link State Advertisement.
                     hwOspfv3LinkLsdbIfIndex 1.3.6.1.4.1.2011.5.25.147.1.5.1.1 interfaceindex no-access
The identifier of the link from which the LSA was received.
                     hwOspfv3LinkLsdbIfInstId 1.3.6.1.4.1.2011.5.25.147.1.5.1.2 hwospfv3ifinstidtc no-access
The identifier of the interface instance from which the LSA was received.
                     hwOspfv3LinkLsdbType 1.3.6.1.4.1.2011.5.25.147.1.5.1.3 unsigned32 no-access
The type of the link state advertisement. Each link state type has a separate advertisement format. Link-Scope LSAs unrecognized by the router are also stored in this database.
                     hwOspfv3LinkLsdbRouterId 1.3.6.1.4.1.2011.5.25.147.1.5.1.4 hwospfv3routeridtc no-access
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
                     hwOspfv3LinkLsdbLsId 1.3.6.1.4.1.2011.5.25.147.1.5.1.5 hwospfv3lsidtc no-access
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
                     hwOspfv3LinkLsdbSequence 1.3.6.1.4.1.2011.5.25.147.1.5.1.6 hwospfv3lsasequencetc read-only
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
                     hwOspfv3LinkLsdbAge 1.3.6.1.4.1.2011.5.25.147.1.5.1.7 hwospfv3lsaagetc read-only
This field is the age of the link state advertisement in seconds.
                     hwOspfv3LinkLsdbChecksum 1.3.6.1.4.1.2011.5.25.147.1.5.1.8 integer32 read-only
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for ISO connectionless datagrams; it is commonly referred to as the Fletcher checksum.
                     hwOspfv3LinkLsdbAdvertisement 1.3.6.1.4.1.2011.5.25.147.1.5.1.9 octet string read-only
The entire Link State Advertisement, including its header.
                     hwOspfv3LinkLsdbTypeKnown 1.3.6.1.4.1.2011.5.25.147.1.5.1.10 truthvalue read-only
Indicates whether the LSA type is recognized by this Router.
             hwOspfv3IfTable 1.3.6.1.4.1.2011.5.25.147.1.6 no-access
The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3.
                 hwOspfv3IfEntry 1.3.6.1.4.1.2011.5.25.147.1.6.1 no-access
The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3.
                     hwOspfv3IfIndex 1.3.6.1.4.1.2011.5.25.147.1.6.1.1 interfaceindex no-access
The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
                     hwOspfv3IfInstId 1.3.6.1.4.1.2011.5.25.147.1.6.1.2 hwospfv3ifinstidtc no-access
Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.
                     hwOspfv3IfAreaId 1.3.6.1.4.1.2011.5.25.147.1.6.1.3 hwospfv3areaidtc read-only
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.
                     hwOspfv3IfType 1.3.6.1.4.1.2011.5.25.147.1.6.1.4 integer read-only
The OSPFv3 interface type. Enumeration: 'pointToMultipoint': 5, 'loopback': 4, 'broadcast': 1, 'p2mpNonbroadcast': 6, 'nbma': 2, 'pointToPoint': 3.
                     hwOspfv3IfAdminStatus 1.3.6.1.4.1.2011.5.25.147.1.6.1.5 status read-only
The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3.
                     hwOspfv3IfRtrPriority 1.3.6.1.4.1.2011.5.25.147.1.6.1.6 designatedrouterpriority read-only
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event of a tie in this value, routers will use their Router ID as a tie breaker.
                     hwOspfv3IfTransitDelay 1.3.6.1.4.1.2011.5.25.147.1.6.1.7 hwospfv3uptorefreshintervaltc read-only
The estimated number of seconds it takes to transmit a link state update packet over this interface.
                     hwOspfv3IfRetransInterval 1.3.6.1.4.1.2011.5.25.147.1.6.1.8 hwospfv3uptorefreshintervaltc read-only
The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets.
                     hwOspfv3IfHelloInterval 1.3.6.1.4.1.2011.5.25.147.1.6.1.9 hwhellorange read-only
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
                     hwOspfv3IfRtrDeadInterval 1.3.6.1.4.1.2011.5.25.147.1.6.1.10 hwospfv3deadintrangetc read-only
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common network.
                     hwOspfv3IfState 1.3.6.1.4.1.2011.5.25.147.1.6.1.11 integer read-only
The OSPFv3 Interface State. Enumeration: 'otherDesignatedRouter': 7, 'backupDesignatedRouter': 6, 'loopback': 2, 'down': 1, 'designatedRouter': 5, 'waiting': 3, 'pointToPoint': 4.
                     hwOspfv3IfDesignatedRouter 1.3.6.1.4.1.2011.5.25.147.1.6.1.12 hwospfv3routeridtc read-only
The Router ID of the Designated Router.
                     hwOspfv3IfBackupDesignatedRouter 1.3.6.1.4.1.2011.5.25.147.1.6.1.13 hwospfv3routeridtc read-only
The Router ID of the Backup Designated Router.
                     hwOspfv3IfEvents 1.3.6.1.4.1.2011.5.25.147.1.6.1.14 counter32 read-only
The number of times this OSPFv3 interface has changed its state, or an error has occurred.
                     hwOspfv3IfRowStatus 1.3.6.1.4.1.2011.5.25.147.1.6.1.15 rowstatus read-only
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
                     hwOspfv3IfMetricValue 1.3.6.1.4.1.2011.5.25.147.1.6.1.16 metric read-only
The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the ospfv3ReferenceBandwidth object.
                     hwOspfv3IfLinkScopeLsaCount 1.3.6.1.4.1.2011.5.25.147.1.6.1.17 gauge32 read-only
The total number of Link-Scope link state advertisements in this link's link state database.
                     hwOspfv3IfLinkLsaCksumSum 1.3.6.1.4.1.2011.5.25.147.1.6.1.18 unsigned32 read-only
The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers.
                     hwOspfv3IfPollInterval 1.3.6.1.4.1.2011.5.25.147.1.6.1.19 unsigned32 read-only
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
                     hwOspfv3IfMulticastForwarding 1.3.6.1.4.1.2011.5.25.147.1.6.1.20 integer read-only
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point to point and NBMA interfaces, and setting ospfv3MulticastForwarding to 0 effectively disables all multicast forwarding. Enumeration: 'unicast': 3, 'multicast': 2, 'blocked': 1.
             hwOspfv3VirtIfTable 1.3.6.1.4.1.2011.5.25.147.1.7 no-access
Information about this router's virtual interfaces.
                 hwOspfv3VirtIfEntry 1.3.6.1.4.1.2011.5.25.147.1.7.1 no-access
Information about a single Virtual Interface.
                     hwOspfv3VirtIfAreaId 1.3.6.1.4.1.2011.5.25.147.1.7.1.1 hwospfv3areaidtc no-access
The Transit Area that the Virtual Link traverses. By definition, this is not Area 0
                     hwOspfv3VirtIfNeighbor 1.3.6.1.4.1.2011.5.25.147.1.7.1.2 hwospfv3routeridtc no-access
The Router ID of the Virtual Neighbor.
                     hwOspfv3VirtIfIndex 1.3.6.1.4.1.2011.5.25.147.1.7.1.3 interfaceindex read-only
The local interface index assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtual link and in the router's router-LSAs.
                     hwOspfv3VirtIfInstId 1.3.6.1.4.1.2011.5.25.147.1.7.1.4 hwospfv3ifinstidtc read-only
Specifies the interface instance ID to be used for the virtual interface. This ID has local link significance only.
                     hwOspfv3VirtIfTransitDelay 1.3.6.1.4.1.2011.5.25.147.1.7.1.5 hwospfv3uptorefreshintervaltc read-only
The estimated number of seconds it takes to transmit a link state update packet over this interface.
                     hwOspfv3VirtIfRetransInterval 1.3.6.1.4.1.2011.5.25.147.1.7.1.6 hwospfv3uptorefreshintervaltc read-only
The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. This value should be well over the expected round-trip time.
                     hwOspfv3VirtIfHelloInterval 1.3.6.1.4.1.2011.5.25.147.1.7.1.7 hellorange read-only
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
                     hwOspfv3VirtIfRtrDeadInterval 1.3.6.1.4.1.2011.5.25.147.1.7.1.8 hwospfv3deadintrangetc read-only
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
                     hwOspfv3VirtIfState 1.3.6.1.4.1.2011.5.25.147.1.7.1.9 integer read-only
OSPFv3 virtual interface states. The same encoding as the hwOspfv3IfTable is used. Enumeration: 'down': 1, 'pointToPoint': 4.
                     hwOspfv3VirtIfEvents 1.3.6.1.4.1.2011.5.25.147.1.7.1.10 counter32 read-only
The number of state changes or error events on this Virtual Link
                     hwOspfv3VirtIfRowStatus 1.3.6.1.4.1.2011.5.25.147.1.7.1.11 rowstatus read-only
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
                     hwOspfv3VirtIfLinkScopeLsaCount 1.3.6.1.4.1.2011.5.25.147.1.7.1.12 gauge32 read-only
The total number of Link-Scope link state advertisements in this virtual link's link state database.
                     hwOspfv3VirtIfLinkLsaCksumSum 1.3.6.1.4.1.2011.5.25.147.1.7.1.13 unsigned32 read-only
The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state database of two routers.
             hwOspfv3NbrTable 1.3.6.1.4.1.2011.5.25.147.1.8 no-access
A table of non-virtual neighbor information.
                 hwOspfv3NbrEntry 1.3.6.1.4.1.2011.5.25.147.1.8.1 no-access
The information regarding a single neighbor.
                     hwOspfv3NbrIfIndex 1.3.6.1.4.1.2011.5.25.147.1.8.1.1 interfaceindex no-access
The local link ID of the link over which the neighbor can be reached.
                     hwOspfv3NbrIfInstId 1.3.6.1.4.1.2011.5.25.147.1.8.1.2 hwospfv3ifinstidtc no-access
Interface instance over which the neighbor can be reached. This ID has local link significance only.
                     hwOspfv3NbrRtrId 1.3.6.1.4.1.2011.5.25.147.1.8.1.3 hwospfv3routeridtc no-access
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
                     hwOspfv3NbrAddressType 1.3.6.1.4.1.2011.5.25.147.1.8.1.4 inetaddresstype read-only
The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
                     hwOspfv3NbrAddress 1.3.6.1.4.1.2011.5.25.147.1.8.1.5 inetaddress read-only
The IPv6 address of the neighbor associated with the local link.
                     hwOspfv3NbrOptions 1.3.6.1.4.1.2011.5.25.147.1.8.1.6 integer32 read-only
A Bit Mask corresponding to the neighbor's options field.
                     hwOspfv3NbrPriority 1.3.6.1.4.1.2011.5.25.147.1.8.1.7 designatedrouterpriority read-only
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
                     hwOspfv3NbrState 1.3.6.1.4.1.2011.5.25.147.1.8.1.8 integer read-only
The State of the relationship with this Neighbor. Enumeration: 'exchangeStart': 5, 'loading': 7, 'attempt': 2, 'exchange': 6, 'down': 1, 'init': 3, 'full': 8, 'twoWay': 4.
                     hwOspfv3NbrEvents 1.3.6.1.4.1.2011.5.25.147.1.8.1.9 counter32 read-only
The number of times this neighbor relationship has changed state, or an error has occurred.
                     hwOspfv3NbrLsRetransQLen 1.3.6.1.4.1.2011.5.25.147.1.8.1.10 gauge32 read-only
The current length of the retransmission queue.
                     hwOspfv3NbrHelloSuppressed 1.3.6.1.4.1.2011.5.25.147.1.8.1.11 truthvalue read-only
Indicates whether Hellos are being suppressed to the neighbor
                     hwOspfv3NbrIfId 1.3.6.1.4.1.2011.5.25.147.1.8.1.12 interfaceindex read-only
The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index.
                     hwOspfv3NbrRestartHelperStatus 1.3.6.1.4.1.2011.5.25.147.1.8.1.13 integer read-only
Indicates whether the router is acting as a Graceful restart helper for the neighbor. Enumeration: 'helping': 2, 'notHelping': 1.
                     hwOspfv3NbrRestartHelperAge 1.3.6.1.4.1.2011.5.25.147.1.8.1.14 hwospfv3uptorefreshintervaltc read-only
Remaining time in current OSPFv3 Graceful restart interval, if the router is acting as a restart helper for the neighbor.
                     hwOspfv3NbrRestartHelperExitRc 1.3.6.1.4.1.2011.5.25.147.1.8.1.15 integer read-only
Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed successfully. timedOut:........the last restart timed out. topologyChanged:.the last restart was aborted due to a topology change. Enumeration: 'none': 1, 'timedOut': 4, 'completed': 3, 'inProgress': 2, 'topologyChanged': 5.
             hwOspfv3CfgNbrTable 1.3.6.1.4.1.2011.5.25.147.1.9 no-access
A table of configured, non-virtual neighbor information.
                 hwOspfv3CfgNbrEntry 1.3.6.1.4.1.2011.5.25.147.1.9.1 no-access
The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery.
                     hwOspfv3CfgNbrIfIndex 1.3.6.1.4.1.2011.5.25.147.1.9.1.1 interfaceindex no-access
The local link ID of the link over which the neighbor can be reached.
                     hwOspfv3CfgNbrIfInstId 1.3.6.1.4.1.2011.5.25.147.1.9.1.2 hwospfv3ifinstidtc no-access
Interface instance over which the neighbor can be reached. This ID has local link significance only.
                     hwOspfv3CfgNbrRtrId 1.3.6.1.4.1.2011.5.25.147.1.9.1.3 hwospfv3routeridtc no-access
A 32-bit integer uniquely identifying the static neighbor router in the Autonomous System.
                     hwOspfv3CfgNbrPriority 1.3.6.1.4.1.2011.5.25.147.1.9.1.4 designatedrouterpriority read-only
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
                     hwOspfv3CfgNbrRowStatus 1.3.6.1.4.1.2011.5.25.147.1.9.1.5 rowstatus read-only
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
             hwOspfv3VirtNbrTable 1.3.6.1.4.1.2011.5.25.147.1.10 no-access
A table of virtual neighbor information.
                   hwOspfv3VirtNbrEntry 1.3.6.1.4.1.2011.5.25.147.1.10.1 no-access
Virtual neighbor information.
                       hwOspfv3VirtNbrArea 1.3.6.1.4.1.2011.5.25.147.1.10.1.1 hwospfv3areaidtc no-access
The Transit Area Identifier.
                       hwOspfv3VirtNbrRtrId 1.3.6.1.4.1.2011.5.25.147.1.10.1.2 hwospfv3routeridtc no-access
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
                       hwOspfv3VirtNbrIfIndex 1.3.6.1.4.1.2011.5.25.147.1.10.1.3 interfaceindex read-only
The local interface ID for the virtual link over which the neighbor can be reached.
                       hwOspfv3VirtNbrIfInstId 1.3.6.1.4.1.2011.5.25.147.1.10.1.4 hwospfv3ifinstidtc read-only
The interface instance for the virtual link over which the neighbor can be reached.
                       hwOspfv3VirtNbrAddressType 1.3.6.1.4.1.2011.5.25.147.1.10.1.5 inetaddresstype read-only
The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.
                       hwOspfv3VirtNbrAddress 1.3.6.1.4.1.2011.5.25.147.1.10.1.6 inetaddress read-only
The IPv6 address advertised by this Virtual Neighbor. It must be a Global scope address.
                       hwOspfv3VirtNbrOptions 1.3.6.1.4.1.2011.5.25.147.1.10.1.7 integer32 read-only
A Bit Mask corresponding to the neighbor's options field.
                       hwOspfv3VirtNbrState 1.3.6.1.4.1.2011.5.25.147.1.10.1.8 integer read-only
The state of the Virtual Neighbor Relationship. Enumeration: 'exchangeStart': 5, 'loading': 7, 'attempt': 2, 'exchange': 6, 'down': 1, 'init': 3, 'full': 8, 'twoWay': 4.
                       hwOspfv3VirtNbrEvents 1.3.6.1.4.1.2011.5.25.147.1.10.1.9 counter32 read-only
The number of times this virtual link has changed its state, or an error has occurred.
                       hwOspfv3VirtNbrLsRetransQLen 1.3.6.1.4.1.2011.5.25.147.1.10.1.10 gauge32 read-only
The current length of the retransmission queue.
                       hwOspfv3VirtNbrHelloSuppressed 1.3.6.1.4.1.2011.5.25.147.1.10.1.11 truthvalue read-only
Indicates whether Hellos are being suppressed to the neighbor
                       hwOspfv3VirtNbrIfId 1.3.6.1.4.1.2011.5.25.147.1.10.1.12 interfaceindex read-only
The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID.
                       hwOspfv3VirtNbrRestartHelperStatus 1.3.6.1.4.1.2011.5.25.147.1.10.1.13 integer read-only
Indicates whether the router is acting as a Graceful restart helper for the neighbor. Enumeration: 'helping': 2, 'notHelping': 1.
                       hwOspfv3VirtNbrRestartHelperAge 1.3.6.1.4.1.2011.5.25.147.1.10.1.14 hwospfv3uptorefreshintervaltc read-only
Remaining time in current OSPFv3 Graceful restart interval, if the router is acting as a restart helper for the neighbor.
                       hwOspfv3VirtNbrRestartHelperExitRc 1.3.6.1.4.1.2011.5.25.147.1.10.1.15 integer read-only
Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed successfully. timedOut:........the last restart timed out. topologyChanged:.the last restart was aborted due to a topology change. Enumeration: 'none': 1, 'timedOut': 4, 'completed': 3, 'inProgress': 2, 'topologyChanged': 5.
             hwOspfv3AreaAggregateTable 1.3.6.1.4.1.2011.5.25.147.1.11 no-access
A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most specific match is the preferred one.
                   hwOspfv3AreaAggregateEntry 1.3.6.1.4.1.2011.5.25.147.1.11.1 no-access
A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most specific match is the preferred one.
                       hwOspfv3AreaAggregateAreaId 1.3.6.1.4.1.2011.5.25.147.1.11.1.1 hwospfv3areaidtc no-access
The Area the Address Aggregate is to be found within.
                       hwOspfv3AreaAggregateAreaLsdbType 1.3.6.1.4.1.2011.5.25.147.1.11.1.2 integer no-access
The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Aggregate applies to. Enumeration: 'interAreaPrefixLsa': 8195, 'nssaExternalLsa': 8199.
                       hwOspfv3AreaAggregatePrefixType 1.3.6.1.4.1.2011.5.25.147.1.11.1.4 inetaddresstype no-access
The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected.
                       hwOspfv3AreaAggregatePrefix 1.3.6.1.4.1.2011.5.25.147.1.11.1.5 inetaddress no-access
The IPv6 Prefix.
                       hwOspfv3AreaAggregatePrefixLength 1.3.6.1.4.1.2011.5.25.147.1.11.1.6 inetaddressprefixlength no-access
The length of the prefix (in bits). A prefix can not be shorter than 0 bits.
                       hwOspfv3AreaAggregateRowStatus 1.3.6.1.4.1.2011.5.25.147.1.11.1.7 rowstatus read-only
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
                       hwOspfv3AreaAggregateEffect 1.3.6.1.4.1.2011.5.25.147.1.11.1.8 integer read-only
Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching), or result in the prefix not being advertised at all outside the area. Enumeration: 'advertiseMatching': 1, 'doNotAdvertiseMatching': 2.
             hwOspfv3NotificationEntry 1.3.6.1.4.1.2011.5.25.147.1.12
                   hwOspfv3ConfigErrorType 1.3.6.1.4.1.2011.5.25.147.1.12.1 integer no-access
Potential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications. When the last value of a notification using this object is needed, but no notifications of that type have been sent, this value pertaining to this object should be returned as noError Enumeration: 'unknownNbmaNbr': 3, 'deadIntervalMismatch': 6, 'mtuMismatch': 8, 'badVersion': 1, 'noError': 10, 'unknownVirtualNbr': 4, 'optionMismatch': 7, 'helloIntervalMismatch': 5, 'areaMismatch': 2, 'duplicateRouterId': 9.
                   hwOspfv3PacketType 1.3.6.1.4.1.2011.5.25.147.1.12.2 integer no-access
OSPFv3 packet types. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object should be returned as nullPacket Enumeration: 'lsAck': 5, 'lsReq': 3, 'nullPacket': 6, 'lsUpdate': 4, 'dbDescript': 2, 'hello': 1.
                   hwOspfv3PacketSrc 1.3.6.1.4.1.2011.5.25.147.1.12.3 inetaddress no-access
The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object should be returned as 0. Only IPv6 addresses without zone index are expected.
                   hwOspfv3IfName 1.3.6.1.4.1.2011.5.25.147.1.12.4 octet string no-access
The interface name
                   hwOspfv3IfStateChgReason 1.3.6.1.4.1.2011.5.25.147.1.12.5 integer no-access
Interface state change reason. Enumeration: 'neighborChangeEventOccured': 5, 'interfaceUp': 2, 'backupSeenOccured': 4, 'interfaceDown': 8, 'loopInd': 6, 'waitTimerExpired': 3, 'noEvent': 1, 'unloopInd': 7.
                   hwOspfv3NbrStateChgReason 1.3.6.1.4.1.2011.5.25.147.1.12.6 integer no-access
Neighbor state change reason. Enumeration: 'receivedTwoWay': 4, 'negotiationDone': 5, 'receivedBadLSRequest': 7, 'nbrKilled': 12, 'linkDown': 14, 'loadingDone': 8, 'start': 3, 'receivedHelloPacket': 2, 'receivedOneWay': 11, 'noEvent': 1, 'establishedAdjacency': 9, 'inactivityTimerExpired': 13, 'mismatchInSeqNumber': 10, 'exchangeDone': 6.
                   hwOspfv3ProcessId 1.3.6.1.4.1.2011.5.25.147.1.12.7 integer32 read-only
The process ID indicates the OSPFv3 process number. The value ranges from 1 to 65535.
                   hwOspfv3AreaIdIndex 1.3.6.1.4.1.2011.5.25.147.1.12.8 hwospfv3areaidtc read-only
A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.
                   hwOspfv3NewRouterId 1.3.6.1.4.1.2011.5.25.147.1.12.9 hwospfv3routeridtc read-only
A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router.
         hwOspfv3Conformance 1.3.6.1.4.1.2011.5.25.147.2
             hwOspfv3Groups 1.3.6.1.4.1.2011.5.25.147.2.1
                 hwOspfv3BasicGroup 1.3.6.1.4.1.2011.5.25.147.2.1.1
These objects are used for managing/monitoring OSPFv3 global parameters.
                 hwOspfv3AreaGroup 1.3.6.1.4.1.2011.5.25.147.2.1.2
These objects are used for OSPFv3 systems supporting areas.
                 hwOspfv3AsLsdbGroup 1.3.6.1.4.1.2011.5.25.147.2.1.3
These objects are used for OSPFv3 systems that display their AS-scope link state database.
                 hwOspfv3AreaLsdbGroup 1.3.6.1.4.1.2011.5.25.147.2.1.4
These objects are used for OSPFv3 systems that display their Area-scope link state database.
                 hwOspfv3LinkLsdbGroup 1.3.6.1.4.1.2011.5.25.147.2.1.5
These objects are used for OSPFv3 systems that display their Link-scope link state database.
                 hwOspfv3IfGroup 1.3.6.1.4.1.2011.5.25.147.2.1.6
These interface objects used for managing/monitoring OSPFv3 interfaces.
                 hwOspfv3VirtIfGroup 1.3.6.1.4.1.2011.5.25.147.2.1.7
These virtual interface objects are used for managing/monitoring OSPFv3 virtual interfaces.
                 hwOspfv3NbrGroup 1.3.6.1.4.1.2011.5.25.147.2.1.8
These neighbor objects are used for managing/monitoring OSPFv3 neighbors.
                 hwOspfv3CfgNbrGroup 1.3.6.1.4.1.2011.5.25.147.2.1.9
These configured neighbor objects are used for managing/monitoring OSPFv3 configured neighbors.
                 hwOspfv3VirtNbrGroup 1.3.6.1.4.1.2011.5.25.147.2.1.10
These virtual neighbor objects are used for managing/monitoring OSPFv3 virtual neighbors.
                 hwOspfv3AreaAggregateGroup 1.3.6.1.4.1.2011.5.25.147.2.1.11
These area aggregate objects used required for aggregating OSPFv3 prefixes for summarization across areas.
                 hwOspfv3NotificationObjectGroup 1.3.6.1.4.1.2011.5.25.147.2.1.12
These objects are used to record notification parameters
                 hwOspfv3NotificationGroup 1.3.6.1.4.1.2011.5.25.147.2.1.13
This group is used for OSPFv3 notifications
             hwOspfv3Compliances 1.3.6.1.4.1.2011.5.25.147.2.2
                 hwOspfv3Compliance 1.3.6.1.4.1.2011.5.25.147.2.2.1
The compliance statement
                 hwOspfv3ReadOnlyCompliance 1.3.6.1.4.1.2011.5.25.147.2.2.2
When this MIB module is implemented without support for read-create (i.e., in read-only mode), the implementation can claim read-only compliance. Such a device can then be monitored, but cannot be configured with this MIB.