HUAWEI-MTA-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
| Home | MIB: HUAWEI-MTA-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| hwMTA | 1.3.6.1.4.1.2011.6.14 |
V01_01 һƶ mta MIB:HUAWEI-MTA-MIB.mib V1.0 汾ɹMIBίԱỷ MTA MIBС鸺ƶרУ tangrong 17270/huawei, liguanrong 26321/huawei, liaoshunquan 24705/huawei, wangxinran 19281/huawei, liuguoping 17383/huawei, wangxiaoman 20905/huawei, luohui 14047/huawei, chenjiangming 18851/huawei, liuchenglong 25279/huawei, zhuyangbin 30583/huawei, weijiahong 14192/huawei, zhoupeng 22164/huawei, xucongyuan 17403/huawei |
||
| hwMTAMibObjects | 1.3.6.1.4.1.2011.6.14.1 | |||
| mtaTable | 1.3.6.1.4.1.2011.6.14.1.1 | no-access |
MTA |
|
| 1.3.6.1.4.1.2011.6.14.1.1.1 | no-access |
MTAʵ |
||
| hwMtaState | 1.3.6.1.4.1.2011.6.14.1.1.1.1 | integer | read-only |
ʾMTAĵǰ״̬,1,2ȴ,3ô,4Լ,5MTA the current state of MTA device, including 1.normal, 2.waiting config, 3.new config error, 4.self detect failed, 5.MTA fault Enumeration: 'waitCfg': 2, 'cfgError': 3, 'normal': 1, 'selfTestError': 4, 'fault': 5. |
| hwMtaHardWareVersion | 1.3.6.1.4.1.2011.6.14.1.1.1.2 | octet string | read-only |
MTA豸ǰӲ汾 the current hardware version of MTA device |
| hwMtaSoftWareVersion | 1.3.6.1.4.1.2011.6.14.1.1.1.3 | octet string | read-only |
MTA豸ǰ汾 the current software version of MTA device |
| hwMtaProtocol | 1.3.6.1.4.1.2011.6.14.1.1.1.4 | integer | read-only |
MTA豸Э, 1:HONETԶ帴Э 2: X.50 S ػ 3: X.50 S =1 4: X.50 S =0 5:I.460Э(4,5ڶ֧) the protocol that MTA support, including:1. Defined privately by HONET, 2. x.50 s bit loop, 3. x.50 s bit=1, 4. x.50 s bit=0 5. I.460 protocol. ( the 4th and 5th is not supported now) Enumeration: 'x50SBitEqu1': 3, 'x50SBitEqu0': 4, 'x50SBitLoop': 2, 'honet': 1, 'i460': 5. |
| hwChannel1Mode | 1.3.6.1.4.1.2011.6.14.1.1.1.5 | integer | read-only |
ʾͨ1ǹͬʽ첽ʽ1: ͬ 2: 첽 3: determine working mode of channel 1: a syn. mode, an asyn. mode, or a prohibited mode Enumeration: 'asyn': 2, 'syn': 1, 'prohibit': 3. |
| hwChannel1Rate | 1.3.6.1.4.1.2011.6.14.1.1.1.6 | integer | read-only |
ʾͨ1ҵ determine the service speed of channel 1 Enumeration: 'r4800bps': 2, 'r128000bps': 6, 'r2400bps': 1, 'r9600bps': 3, 'r19200bps': 4, 'r64000bps': 5. |
| hwChannel1DteDce | 1.3.6.1.4.1.2011.6.14.1.1.1.7 | integer | read-only |
MTAͨ1ΪDCEΪDTEһDCE豸 determine the polarity of channel 1: DCE or DTE Enumeration: 'dCE': 1, 'dTE': 2. |
| hwChannel1Clock | 1.3.6.1.4.1.2011.6.14.1.1.1.8 | integer | read-only |
ͨ1ʱʽInternalʾʹ豸ʱӣExternalʾϼʱӣSlaveʾ豸ʱ the clock locked mode of channel 1: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device access to this channel Enumeration: 'internal': 1, 'slave': 3, 'external': 2. |
| hwChannel1SignalLinePhase | 1.3.6.1.4.1.2011.6.14.1.1.1.9 | integer32 | read-only |
2Ƶ00001111ӵλλÿBITλαʾʱӷǷ,ʱǷ,ݷǷ,Ƿ 1: 0: the signal line phase of channel 1, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase. and value 1 means reverse phase, value 0 means in-phase. |
| hwChannel1AsynLen | 1.3.6.1.4.1.2011.6.14.1.1.1.10 | integer32 | read-only |
ͨ1첽ʽµֳʼλλֹλܳ the word length of channel 1 working in the asynchro mode, including the starting bit,the data bits and the end bit |
| hwChannel1BChannelNo | 1.3.6.1.4.1.2011.6.14.1.1.1.11 | integer | read-only |
ʾͨ12B+DĸBͨϳ determins the B channel N.O. to carry the data in channel 1 Enumeration: 'b1': 1, 'b2': 2. |
| hwChannel1EnvolopPhase | 1.3.6.1.4.1.2011.6.14.1.1.1.12 | integer | read-only |
ʾͨ1ռðķʽ1:˳ 2 determins the envolop phase to carry the data in channel 1 Enumeration: 'interleave': 2, 'sequence': 1. |
| hwChannel1Status | 1.3.6.1.4.1.2011.6.14.1.1.1.13 | integer | read-only |
(1),(2),˻(3),Զ˻(4),(5),ӦBͨ֡ʧ(6),豸δ(7),ӦBͨԶ֡ʧ(8),ӦBͨ˻(9),ӦBͨԶ˻(10),(11) describes the current state of channel 1 Enumeration: 'bChannelLocalLof': 6, 'normal': 2, 'fault': 11, 'bChannelRemoteLoop': 10, 'remoteLoop': 4, 'bChannelLocalLoop': 9, 'idle': 1, 'dteNotReady': 7, 'localLoop': 3, 'bChannelRemoteLof': 8, 'block': 5. |
| hwChannel2Mode | 1.3.6.1.4.1.2011.6.14.1.1.1.14 | integer | read-only |
ʾͨ2ǹͬʽ첽ʽ1: ͬ 2: 첽 3: determine working mode of channel 2: a syn. mode, an asyn. mode, or a prohibited mode Enumeration: 'asyn': 2, 'syn': 1, 'prohibit': 3. |
| hwChannel2Rate | 1.3.6.1.4.1.2011.6.14.1.1.1.15 | integer | read-only |
ʾͨ2ҵ determine the service speed of channel 2 Enumeration: 'r4800bps': 2, 'r128000bps': 6, 'r2400bps': 1, 'r9600bps': 3, 'r19200bps': 4, 'r64000bps': 5. |
| hwChannel2DteDce | 1.3.6.1.4.1.2011.6.14.1.1.1.16 | integer | read-only |
MTAͨ2ΪDCEΪDTEһDCE豸 determine the polarity of channel 2: DCE or DTE Enumeration: 'dCE': 1, 'dTE': 2. |
| hwChannel2Clock | 1.3.6.1.4.1.2011.6.14.1.1.1.17 | integer | read-only |
ͨ2ʱʽInternalʾʹʹ豸ʱӣExternalʾϼʱӣSlaveʾ豸ʱ the clock locked mode of channel 2: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device access to this channel Enumeration: 'internal': 1, 'slave': 3, 'external': 2. |
| hwChannel2SignalLinePhase | 1.3.6.1.4.1.2011.6.14.1.1.1.18 | integer32 | read-only |
2Ƶ00001111ӵλλÿBITλαʾʱӷǷ,ʱǷ,ݷǷ,Ƿ 1: 0: the signal line phase of channel 2, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase. and value 1 means reverse phase, value 0 means in-phase. |
| hwChannel2AsynLen | 1.3.6.1.4.1.2011.6.14.1.1.1.19 | integer32 | read-only |
ͨ첽ʽµֳʼλλֹλܳ the word length of channel 2 working in the asynchro mode, including the starting bit,the data bits and the end bit |
| hwChannel2BChannelNo | 1.3.6.1.4.1.2011.6.14.1.1.1.20 | integer | read-only |
ʾͨ22B+DĸBͨϳ determins the B channel N.O. to carry the data in channel 2 Enumeration: 'b1': 1, 'b2': 2. |
| hwChannel2EnvolopPhase | 1.3.6.1.4.1.2011.6.14.1.1.1.21 | integer | read-only |
ʾͨ2ռðķʽ1:˳ 2 determins the envolop phase to carry the data in channel 2 Enumeration: 'interleave': 2, 'sequencal': 1. |
| hwChannel2Status | 1.3.6.1.4.1.2011.6.14.1.1.1.22 | integer | read-only |
(1),(2),˻(3),Զ˻(4),(5),ӦBͨ֡ʧ(6),豸δ(7),ӦBͨԶ֡ʧ(8),ӦBͨ˻(9),ӦBͨԶ˻(10),(11) describes the current state of channel 2 Enumeration: 'bChannelLocalLof': 6, 'normal': 2, 'fault': 11, 'bChannelRemoteLoop': 10, 'remoteLoop': 4, 'bChannelLocalLoop': 9, 'idle': 1, 'dteNotReady': 7, 'localLoop': 3, 'bChannelRemoteLof': 8, 'block': 5. |
| hwChannel3Mode | 1.3.6.1.4.1.2011.6.14.1.1.1.23 | integer | read-only |
ʾͨ3ǹͬʽ첽ʽ1: ͬ 2: 첽 3: determine working mode of channel 3: a syn. mode, an asyn. mode, or a prohibited mode Enumeration: 'asyn': 2, 'syn': 1, 'prohibit': 3. |
| hwChannel3Rate | 1.3.6.1.4.1.2011.6.14.1.1.1.24 | integer | read-only |
ʾͨ3ҵ determine the service speed of channel 3 Enumeration: 'r4800bps': 2, 'r128000bps': 6, 'r2400bps': 1, 'r9600bps': 3, 'r19200bps': 4, 'r64000bps': 5. |
| hwChannel3DteDce | 1.3.6.1.4.1.2011.6.14.1.1.1.25 | integer | read-only |
MTAͨ3ΪDCEΪDTEһDCE豸 determine the polarity of channel 3: DCE or DTE Enumeration: 'dCE': 1, 'dTE': 2. |
| hwChannel3Clock | 1.3.6.1.4.1.2011.6.14.1.1.1.26 | integer | read-only |
ͨ3ʱʽInternalʾʹ豸ʱӣExternalʾϼʱӣSlaveʾ豸ʱ the clock locked mode of channel 3: 1. Internal means the clock in MTA device, 2.External means the superior device's clock, 3. Slave means the clock of device access to this channel Enumeration: 'internal': 1, 'slave': 3, 'external': 2. |
| hwChannel3SignalLinePhase | 1.3.6.1.4.1.2011.6.14.1.1.1.27 | integer32 | read-only |
2Ƶ00001111ӵλλÿBITλαʾʱӷǷ,ʱǷ,ݷǷ,Ƿ 1: 0: the signal line phase of channel 1, determined by four bits of which the less significant defines the clock sending phase, the 2th the clock receiving phase, the 3th the data sending phase, the 4th the data receiving phase. and value 1 means reverse phase, value 0 means in-phase. |
| hwChannel3AsynLen | 1.3.6.1.4.1.2011.6.14.1.1.1.28 | integer32 | read-only |
ͨ3첽ʽµֳʼλλֹλܳ the word length of channel 3 working in the asynchro mode, including the starting bit,the data bits and the end bit |
| hwChannel3BChannelNo | 1.3.6.1.4.1.2011.6.14.1.1.1.29 | integer | read-only |
ʾͨ32B+DĸBͨϳ determins the B channel N.O. to carry the data in channel 3 Enumeration: 'b1': 1, 'b2': 2. |
| hwChannel3EnvolopPhase | 1.3.6.1.4.1.2011.6.14.1.1.1.30 | integer | read-only |
ʾͨ3ռðķʽ1:˳ 2 determins the envolop phase to carry the data in channel 3 Enumeration: 'interleave': 2, 'sequencal': 1. |
| hwChannel3Status | 1.3.6.1.4.1.2011.6.14.1.1.1.31 | integer | read-only |
(1),(2),˻(3),Զ˻(4),(5),ӦBͨ֡ʧ(6),豸δ(7),ӦBͨԶ֡ʧ(8),ӦBͨ˻(9),ӦBͨԶ˻(10),(11) describes the current state of channel 3 Enumeration: 'bChannelLocalLof': 6, 'normal': 2, 'fault': 11, 'bChannelRemoteLoop': 10, 'remoteLoop': 4, 'bChannelLocalLoop': 9, 'idle': 1, 'dteNotReady': 7, 'localLoop': 3, 'bChannelRemoteLof': 8, 'block': 5. |
| hwUserIdentity | 1.3.6.1.4.1.2011.6.14.1.1.1.32 | octet string | read-only |
ʾMTAıʶַͬ豸ͬ (SIZE(0..9)) the identity label of this MTA, and two or more MTAs may have the same identity label |
| hwMaintainOper | 1.3.6.1.4.1.2011.6.14.1.1.1.33 | integer | read-write |
1ɲ 2ȡ 3:˻ 4Զ˻ 5λ, ʾԶMTAеά ɲ(1)ֻΪGET, SETû, MTAȡʱȡеĻ,˲Ӧָض, ڽ˻غԶ˻, Ҫָض, MTAλָλMTAն, ϵͳλ֮Ҳʧ defines the maintain operation type, no operation(1) is just for GET, and is of no meaning for SET, CancelLoop(2) cancels all loops of the MTA, thus should not be set alongside Loop Object, LocalLoop and RemoteLoop must be bound to the Loop Object, reset operation will reset the MTA, and MTA will not be at loop state. Enumeration: 'reset': 5, 'cancelLoop': 2, 'localLoop': 3, 'remoteLoop': 4, 'noOperation': 1. |
| hwLoopObject | 1.3.6.1.4.1.2011.6.14.1.1.1.34 | integer | read-write |
ʾлزʱIJ, GETڵʱnoOperation(1), SET, noOperation(1)û defines the loop object when setting LocalLoop or RemoteLoop operation, Getting this object will get value noOperation(1), while is of no meaning when Setting Enumeration: 'dataChannel3': 4, 'doubleBPlusDChannel': 7, 'noOperation': 1, 'b2Channel': 6, 'dataChannel2': 3, 'dataChannel1': 2, 'b1Channel': 5. |
| hwChannel1AlarmStatus | 1.3.6.1.4.1.2011.6.14.1.1.1.35 | integer32 | read-only |
Ϊ1ʾͨ1豸δ澯Ϊ0ʾ豸δ澯 describes the current alarm status of channel 1, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready |
| hwChannel2AlarmStatus | 1.3.6.1.4.1.2011.6.14.1.1.1.36 | integer32 | read-only |
Ϊ1ʾͨ2豸δ澯Ϊ0ʾ豸δ澯 describes the current alarm status of channel 2, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready |
| hwChannel3AlarmStatus | 1.3.6.1.4.1.2011.6.14.1.1.1.37 | integer32 | read-only |
Ϊ1ʾͨ3豸δ澯Ϊ0ʾ豸δ澯 describes the current alarm status of channel 3, 1 means the device access to MTA channel 1 is not ready, while 0 means the device is ready |
| hwBChannel1AlarmStatus | 1.3.6.1.4.1.2011.6.14.1.1.1.38 | integer32 | read-only |
Bͨ1ĸ澯״̬,Ϊ2Ƶ00..11, λΪ1ʾB1ͨڱ֡ʧ澯, Ϊ0ʾӦ澯 λΪ1ʾB1ͨڶԶ֡ʧ澯, Ϊ0ʾӦ澯 describes the current alarm status of B channel 1, determined by two bits of which the less significant defines whether adaptive loss of multi-frame alignment of B channel 1 happened to MTA local equipment, 1 means yes, 0 means no, the most significant bit defines whether adaptive loss of multi-frame alignment of B channel 1 happened to MTA remote equipment, 1 means yes, 0 means no, |
| hwBChannel2AlarmStatus | 1.3.6.1.4.1.2011.6.14.1.1.1.39 | integer32 | read-only |
B2ͨĸ澯״̬,Ϊ2Ƶ00..11, λΪ1ʾB2ͨڱ֡ʧ澯, Ϊ0ʾӦ澯 λΪ1ʾB2ͨڶԶ֡ʧ澯, Ϊ0ʾӦ澯 describes the current alarm status of B channel 2, determined by two bits of which the less significant defines whether adaptive loss of multi-frame alignment of B channel 2 happened to MTA local equipment, 1 means yes, 0 means no, the most significant bit defines whether adaptive loss of multi-frame alignment of B channel 1 happened to MTA remote equipment, 1 means yes, 0 means no, |
| hwRowStatus | 1.3.6.1.4.1.2011.6.14.1.1.1.40 | rowstatus | read-only |
Ŀǰֻ֧CreateAndGo(4)Destroy(6) MTA supports the operation createAndGo(4) and Destroy(6) only |
| hwMTAMibTrap | 1.3.6.1.4.1.2011.6.14.2 | |||
| hwMTATrapOid | 1.3.6.1.4.1.2011.6.14.2.1 | |||
| hwMTATrapsDefine | 1.3.6.1.4.1.2011.6.14.2.2 | |||
| hwMTATraps | 1.3.6.1.4.1.2011.6.14.2.2.0 | |||
| hwMTAMibCompance | 1.3.6.1.4.1.2011.6.14.3 | |||