HUAWEI-LLDP-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-LLDP-MIB
Download as:   
SNMPv2-CONF, LLDP-MIB, IF-MIB, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwLldpMIB 1.3.6.1.4.1.2011.5.25.134
This file is an extension of LLDP-MIB. It provides such functions of globally enabling or disabling the LLDP protocol, enabling the global alarm, clearing statistics on ports and configuring network management IP addresses and some alarms.
         hwLldpObjects 1.3.6.1.4.1.2011.5.25.134.1
             hwLldpConfiguration 1.3.6.1.4.1.2011.5.25.134.1.1
                 hwLldpEnable 1.3.6.1.4.1.2011.5.25.134.1.1.1 enabledstatus read-write
Globally enable or disable the LLDP configuration. If the hwLldpEnable is 1, LLDP is enabled. If the hwLldpEnable is 2, LLDP is disabled. By default, LLDP is disabled.
                 hwLldpLocManIPAddr 1.3.6.1.4.1.2011.5.25.134.1.1.2 ipaddress read-write
Specifies the management IP address of the local device. The management IP address is carried in the management address TLV of LLDP packet and is used to identify NM devices in network management. The management IP address configured here must be a valid one and must be an IP address in the address chain. If the IP address is not valid or is not configured, the management IP address will be chosen from default IP addressees of the system. The sequence of address searching is: loopback interface, management network interface, VLANIF port and IP address chain (The smallest IP is chosen). If the default IP is not found, the bridge MAC of the system is used.
                 hwLldpCounterReset 1.3.6.1.4.1.2011.5.25.134.1.1.3 enabledstatus read-write
Clears the statistics of packets received and sent on all ports.
                 hwLldpNotificationEnable 1.3.6.1.4.1.2011.5.25.134.1.1.4 enabledstatus read-write
The global alarming that is used to control alarms on all ports. If it is 1, the global alarming is enabled. If it is 2, the global alarming is disabled. By default, the global alarming is disabled.
                 hwLldpPortConfigTable 1.3.6.1.4.1.2011.5.25.134.1.1.5 no-access
LLDP port congfiguration table.
                     hwLldpPortConfigEntry 1.3.6.1.4.1.2011.5.25.134.1.1.5.1 no-access
Entries of the LLDP port congfiguration table.
                         hwLldpPortConfigIfIndex 1.3.6.1.4.1.2011.5.25.134.1.1.5.1.11 interfaceindex read-only
Port index.
                         hwLldpPortConfigCounterReset 1.3.6.1.4.1.2011.5.25.134.1.1.5.1.12 enabledstatus read-write
Clears the statistics of packets received and sent on the current port.
             hwLldpRemoteSystemData 1.3.6.1.4.1.2011.5.25.134.1.2
                 hwLldpRemProtoTypeTable 1.3.6.1.4.1.2011.5.25.134.1.2.1 no-access
LLDP remote neighbour protocol version table.
                     hwLldpRemProtoTypeEntry 1.3.6.1.4.1.2011.5.25.134.1.2.1.1 no-access
Entries of the LLDP remote neighbour protocol version table.
                         hwLldpRemProtoType 1.3.6.1.4.1.2011.5.25.134.1.2.1.1.1 integer read-only
Protocol type of the remote neighbour. Enumeration: 'lldp': 1, 'unknown': 255, 'cdp': 2.
         hwLldpTraps 1.3.6.1.4.1.2011.5.25.134.2
             hwLldpEnabled 1.3.6.1.4.1.2011.5.25.134.2.1
Notify the NMS that the LLDP is globally enabled. This alarm is not restricted by the alarm delay.
             hwLldpDisabled 1.3.6.1.4.1.2011.5.25.134.2.2
Notify the NMS that the LLDP is globally disabled. This alarm is not restricted by the alarm delay.
             hwLldpLocSysCapSupportedChange 1.3.6.1.4.1.2011.5.25.134.2.3
Alarm on the change of capabilities supported of a local device.
             hwLldpLocSysCapEnabledChange 1.3.6.1.4.1.2011.5.25.134.2.4
Alarm on the change of capabilities enabled of a local device.
             hwLldpLocManIPAddrChange 1.3.6.1.4.1.2011.5.25.134.2.5
Alarm on the change of management IP address of a local device.
         hwLldpConformance 1.3.6.1.4.1.2011.5.25.134.3
             hwLldpCompliances 1.3.6.1.4.1.2011.5.25.134.3.1
                 lldpCompliance 1.3.6.1.4.1.2011.5.25.134.3.1.1
The compliance statement for SNMP entities which implement the HUAWEI-LLDP-MIB.
             hwLldpGroups 1.3.6.1.4.1.2011.5.25.134.3.2
                 hwLldpConfigGroup 1.3.6.1.4.1.2011.5.25.134.3.2.1
The collection of objects which are used to configure the LLDP implementation behavior. This group is mandatory for agents which implement the LLDP.
                 hwLldpStatsGroup 1.3.6.1.4.1.2011.5.25.134.3.2.2
The collection of objects which are used to represent LLDP statistics. This group is mandatory for agents which implement the LLDP and have the capability of receiving and transmitting LLDP frames.
                 hwLldpPortGroup 1.3.6.1.4.1.2011.5.25.134.3.2.3
The collection of objects indicate index of port.
                 hwLldpTrapGroup 1.3.6.1.4.1.2011.5.25.134.3.2.4
The collection of notifications used to indicate HUAWEI-LLDP-MIB data consistency and general status information. This group is mandatory for agents which implement the LLDP and have the capability of receiving LLDP frames.