HUAWEI-LDT-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-LDT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwLdtMIB 1.3.6.1.4.1.2011.5.25.174
This file is an LDT-MIB. It provides such functions of globally enabling or disabling the LDT function, enabling the global alarm, clearing statistics on ports and configuring work mode and so on.
         hwLdtObjects 1.3.6.1.4.1.2011.5.25.174.1
             hwLdtConfiguration 1.3.6.1.4.1.2011.5.25.174.1.1
                 hwLdtEnable 1.3.6.1.4.1.2011.5.25.174.1.1.1 integer read-write
Globally enable or disable the LDT configuration. If the hwLdtEnable is 1, LDT is enabled. If the hwLdtEnable is 2, LDT is disabled. By default, LDT is 2(disabled). Enumeration: 'disabled': 2, 'enabled': 1.
                 hwLdtIntervalTime 1.3.6.1.4.1.2011.5.25.174.1.1.2 integer32 read-write
Packet send interval time. By default, the time is 5s.
                 hwLdtVlanListLow 1.3.6.1.4.1.2011.5.25.174.1.1.3 octet string read-write
The lowest possible value of the vlan list.
                 hwLdtVlanListHigh 1.3.6.1.4.1.2011.5.25.174.1.1.4 octet string read-write
The highest possible value of the vlan list.
                 hwLdtPortConfigTable 1.3.6.1.4.1.2011.5.25.174.1.1.5 no-access
LDT port congfiguration table.
                     hwLdtPortConfigEntry 1.3.6.1.4.1.2011.5.25.174.1.1.5.1 no-access
Entries of the LDT port congfiguration table.
                         hwLdtInterfaceIndex 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.1 interfaceindex no-access
A unique value, greater than zero, for each interface or interface sub-layer in the managed system. The value is consistent with the ifIndex in ifTable of IF-MIB.
                         hwLdtInterfaceName 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.2 octet string read-only
The interface name.
                         hwLdtPortLdtEnable 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.3 integer read-write
Interface enable or disable. If the hwLdtPortLdtEnable is 1, it is enabled. If the hwLdtPortLdtEnable is 2, it is disabled. By default, it is disabled. Enumeration: 'disabled': 2, 'enabled': 1.
                         hwLdtPortMode 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.4 integer read-write
Action of Loop detection, including trap, blocking,noLearning,and shutdown. By default the mode is blocking. Enumeration: 'noLearning': 3, 'trap': 1, 'shutdown': 4, 'blocking': 2.
                         hwLdtPortStatus 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.5 integer read-only
Port status, including normal, blocking, noLearning, and shutdown. By default the status is normal. Enumeration: 'noLearning': 3, 'blocking': 2, 'shutdown': 4, 'normal': 1.
                         hwLdtPortRecoveryTime 1.3.6.1.4.1.2011.5.25.174.1.1.5.1.6 integer32 read-write
Port recovery time.By default the time is 1s.
                 hwLdtPortStatusTable 1.3.6.1.4.1.2011.5.25.174.1.1.6 no-access
LDT port status table.
                     hwLdtPortStatusEntry 1.3.6.1.4.1.2011.5.25.174.1.1.6.1 no-access
Entries of the LDT port status table.
                         hwLdtPortVlanIDIndex 1.3.6.1.4.1.2011.5.25.174.1.1.6.1.1 vlanid no-access
Port enabled vlanId.
                         hwLdtPortVlanStatus 1.3.6.1.4.1.2011.5.25.174.1.1.6.1.2 integer read-only
Port status, including normal, blocking, noLearning, and shutdown. By default the status is normal. Enumeration: 'noLearning': 3, 'blocking': 2, 'shutdown': 4, 'normal': 1.
                 hwPortLoopDetectTable 1.3.6.1.4.1.2011.5.25.174.1.1.7 no-access
A table containing the port external loopback detection information for device. It can protect the port from external loopback.
                     hwPortLoopDetectEntry 1.3.6.1.4.1.2011.5.25.174.1.1.7.1 no-access
Entries of the port external loopback detection table.
                         hwPortLoopDetectIfIndex 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.1 interfaceindex no-access
The port number which will be configured port external loopback detection.
                         hwLPortLoopDetectIfName 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.2 octet string read-only
The interface name.
                         hwPortLoopDetectEnabled 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.3 enabledstatus read-write
When this object is set to 'enabled(1)' Port external loopback detection is enabled on this port else disabled.
                         hwPortLoopDetectRecoveryTime 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.4 integer32 read-write
The detect period of port external loopback detection, the default value is 0.
                         hwPortLoopDetectAction 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.5 integer read-write
The port external loopback detection protect action of this entry. Enumeration: 'noLearning': 4, 'blocking': 2, 'shutdown': 1, 'trap': 3.
                         hwPortLoopDetectStatus 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.6 integer read-only
The current status of port(normal/blocking/shutdown/trap/noLearning). Enumeration: 'trap': 4, 'noLearning': 5, 'blocking': 2, 'shutdown': 3, 'normal': 1.
                         hwPortLoopDetectProtocol 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.7 octet string read-write
The ethernet type of the detecting packet to port external loopback detection.
                         hwPortLoopDetectVlanLow 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.8 octet string read-write
The lowest value of the vlan list for detecting loop.
                         hwPortLoopDetectVlanHigh 1.3.6.1.4.1.2011.5.25.174.1.1.7.1.9 octet string read-write
The highest value of the vlan list for detecting loop.
                 hwLoopDetectInterval 1.3.6.1.4.1.2011.5.25.174.1.1.8 integer32 read-write
The detect period of system external loopback detection, the default value is 5 second.
                 hwLoopDetectSendingPacketInterval 1.3.6.1.4.1.2011.5.25.174.1.1.9 integer32 read-write
The period of sending detecting packet, the default value is 5 second.
         hwLdtPortTrapObjects 1.3.6.1.4.1.2011.5.25.174.2
             hwLdtPortLoopVlanListLow 1.3.6.1.4.1.2011.5.25.174.2.1 octet string no-access
The lowest possible value of the vlan list for discovering loop.
             hwLdtPortLoopVlanListHigh 1.3.6.1.4.1.2011.5.25.174.2.2 octet string no-access
The highest possible value of the vlan list for discovering loop.
             hwLdtPortRecoverVlanListLow 1.3.6.1.4.1.2011.5.25.174.2.3 octet string no-access
The lowest possible value of the vlan list for discovering loop.
             hwLdtPortRecoverVlanListHigh 1.3.6.1.4.1.2011.5.25.174.2.4 octet string no-access
The highest possible value of the vlan list for discovering loop.
             hwLdtPortLoopDetectVlanList 1.3.6.1.4.1.2011.5.25.174.2.5 octet string no-access
The possible vlan for discovering loop.
         hwLdtTraps 1.3.6.1.4.1.2011.5.25.174.3
             hwLdtPortLoop 1.3.6.1.4.1.2011.5.25.174.3.1
Notify the NMS that the LDT detected Loop.hwLdtInterfaceName node is interface name, hwLdtPortLoopVlanlistLow node is The lowest possible value of the vlan list, hwLdtPortLoopVlanlistHigh node is The highest possible value of the vlan list.
             hwLdtPortRecovry 1.3.6.1.4.1.2011.5.25.174.3.2
Notify the NMS that the LDT detected resuming port.hwLdtInterfaceName node is interface index, hwLdtPortRecoverVlanlistLow node is The lowest possible value of the vlan list, hwLdtPortRecoverVlanlistHigh node is The highest possible value of the vlan list.
             hwLdtPortLoopDetect 1.3.6.1.4.1.2011.5.25.174.3.3
Notify the NMS that Loopback does exist on this port, hwLdtPortLoopDetectVlanList node indicates that which VLAN exits loopback, hwPortLoopDetectStatus node is the status of this port.
             hwLdtPortLoopDetectRecovery 1.3.6.1.4.1.2011.5.25.174.3.4
Notify the NMS that Loopback disappeared on this port.
         hwLdtConformance 1.3.6.1.4.1.2011.5.25.174.4
             hwLdtConformances 1.3.6.1.4.1.2011.5.25.174.4.1
                 hwLdtCompliance 1.3.6.1.4.1.2011.5.25.174.4.1.1
The compliance statement for SNMP entities which implement the HUAWEI-LDT-MIB.
             hwLdtGroups 1.3.6.1.4.1.2011.5.25.174.4.2
                 hwLdtConfigGroup 1.3.6.1.4.1.2011.5.25.174.4.2.1
The collection of objects which are used to configure the LDT implementation behavior. This group is mandatory for agents which implement the LDT.
                 hwLdtPortConfigGroup 1.3.6.1.4.1.2011.5.25.174.4.2.2
The collection of objects indicate information of port.
                 hwLdtTrapPortGroup 1.3.6.1.4.1.2011.5.25.174.4.2.3
The collection of notifications used to indicate HUAWEI-LDT-MIB data consistency and general status information.
                 hwLdtTrapGroup 1.3.6.1.4.1.2011.5.25.174.4.2.4
The collection of notifications used to indicate HUAWEI-LDT-MIB data consistency and general status information.