HUAWEI-LAG-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-LAG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-3COM-OID-MIB, Q-BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwLAG 1.3.6.1.4.1.2011.5.25.25
LACP extend MIB.
       hwLAGMibObjects 1.3.6.1.4.1.2011.5.25.25.1
           hwAggLinkTable 1.3.6.1.4.1.2011.5.25.25.1.1 no-access
A table of aggregate link objects.
               hwAggLinkEntry 1.3.6.1.4.1.2011.5.25.25.1.1.1 no-access
Entry of table.
                   hwAggLinkNumber 1.3.6.1.4.1.2011.5.25.25.1.1.1.1 integer32 no-access
The serial number of aggregation group.
                   hwAggLinkName 1.3.6.1.4.1.2011.5.25.25.1.1.1.2 displaystring read-only
Aggregation name.
                   hwAggLinkMode 1.3.6.1.4.1.2011.5.25.25.1.1.1.3 integer read-only
Type of aggregation. manual: Manual aggregation, no LACP. static: Membership specified by user, LACP is used to validate. dynamic: Completely dynamic aggregation detected by LACP. Enumeration: 'static': 2, 'manual': 1, 'dynamic': 3.
                   hwAggLinkPortList 1.3.6.1.4.1.2011.5.25.25.1.1.1.4 portlist read-only
List of ports in this link aggregation group, by bridge port number. If the mode of the link aggregation group is manual or static, you can update this list to your hearts content. However, if the link aggregation group is dynamic, then the system will maintain it. You are not permitted to set the value of this to all zeroes.
                   hwAggLinkState 1.3.6.1.4.1.2011.5.25.25.1.1.1.5 rowstatus read-only
RowStatus, now support three states: createAndGo, active, destroy.
                   hwAggPortListSelectedPorts 1.3.6.1.4.1.2011.5.25.25.1.1.1.6 portlist read-only
A PortList of physical ports that have been selected but not attached to this aggregator. When the bit is set to 1,it means the corresponding port is in the portlist.
                   hwAggPortListSamePartnerPorts 1.3.6.1.4.1.2011.5.25.25.1.1.1.7 portlist read-only
PortList of physical ports that have the same Actor SystemID and partner systemID as this aggregator, but have different actor and partner keys of aggregator.
           hwAggPortTable 1.3.6.1.4.1.2011.5.25.25.1.2 no-access
A table of aggregate port objects.
               hwAggPortEntry 1.3.6.1.4.1.2011.5.25.25.1.2.1 no-access
Entry of table.
                   hwAggPortIndex 1.3.6.1.4.1.2011.5.25.25.1.2.1.1 gauge32 no-access
Port ifindex which is according to RFC1213 MIB.
                   hwAggPortNotAttachedReason 1.3.6.1.4.1.2011.5.25.25.1.2.1.2 integer32 read-write
Reason why this port is selected for an aggregator but not attached, 0: The port is attached to this aggregator. 1: The current number of active ports has reached the upper limit. 2: All aggregation resources are already in-use. 3: The port's configuration is improper for being attached. 4: The port's partner is improper for being attached. 5: The number of current active ports has not reached the lower limit. 6: The port's physical state (down) is improper for being attached. 7: The port is not selected for an aggregator. 8: The port's hardware restriction is improper for being attached. 9: The port's speed is improper for being attached. 10: The port's duplex mode is improper for being attached.
                   hwAggPortLacpState 1.3.6.1.4.1.2011.5.25.25.1.2.1.3 truthvalue read-write
Control ports' lacp enble or disable.
                   hwAggPortNotAttachedString 1.3.6.1.4.1.2011.5.25.25.1.2.1.4 displaystring read-write
The string which interprets this port is selected for an aggregator but not attached.
           hwAggResourceAllocationValue 1.3.6.1.4.1.2011.5.25.25.1.3 portlist read-only
The priority value calculated to decide which aggregations have first call on the load-sharing aggregation resources in the hardware. It depends on the aggregation's type and total speed.
       hwLAGMibNotifications 1.3.6.1.4.1.2011.5.25.25.2
           hwAggSpeedChangedNotification 1.3.6.1.4.1.2011.5.25.25.2.1
This event will be triggered whenever an aggregation changes its speed.
           hwAggPortInactiveNotification 1.3.6.1.4.1.2011.5.25.25.2.2
This event will be triggered whenever any port in aggrerator is made inactive.
           hwAggPortInactiveNotification2 1.3.6.1.4.1.2011.5.25.25.2.3
This event will be triggered whenever the port in aggrerator is made inactive.
           hwAggPortActiveNotification 1.3.6.1.4.1.2011.5.25.25.2.4
This event will be triggered whenever the port in aggrerator is made active.
       hwLAGMibConformance 1.3.6.1.4.1.2011.5.25.25.3
           hwLAGMibCompliances 1.3.6.1.4.1.2011.5.25.25.3.1
               hwLAGMibCompliance 1.3.6.1.4.1.2011.5.25.25.3.1.1
The compliance statement for SNMP entities which implement the Lag MIB.
           hwLAGMibGroup 1.3.6.1.4.1.2011.5.25.25.3.2
               hwLAGMibObjectGroup 1.3.6.1.4.1.2011.5.25.25.3.2.1
The collection of objects which are used to represent LAG objects.
               hwLAGMibNotificationGroup 1.3.6.1.4.1.2011.5.25.25.3.2.2
The collection of objects which are used to represent notifications.