HUAWEI-IPDSLAM-L2PPORTCONFIG-MIB: View SNMP OID List / Download MIB

The mib module defines the MIB objects of the two layer IPDSLAM configuration that based on port. The port configuration includes configuring and querying all types of physical and service virtual ports.

Used for setting and querying the configuration based on port. The indexes of this table are hwIpDslamL2pPortConfigIfIndex, hwIpDslamL2pPortConfigSecondIndex, hwIpDslamL2pPortConfigThirdIndex, and hwIpDslamL2pPortConfigObject.

Used for setting and querying the configuration based on port. The indexes of this entry are hwIpDslamL2pPortConfigIfIndex, hwIpDslamL2pPortConfigSecondIndex, hwIpDslamL2pPortConfigThirdIndex, and hwIpDslamL2pPortConfigObject.

The same as the ifIndex in Huawei MIB. To set or query hwIpDslamL2pPortConfigTable, you need to input the value of hwIpDslamL2pPortConfigIfIndex on the NMS.

An invalid value needs to be input for this leaf for the ADSL, SHDSL, VDSL2, and OPFA boards. The invalid value is defined as 0xFFFFFFFFFFFFFFFF. For GPON boards, in the xPON distributed mode, the configuration granularity of L2 enhanced services based on physical port is GEM port. In this case, this leaf is used to indicate the GEM port ID and the value range is 128-3999. In the xPON (EPON and GPON) profile mode, this leaf is used to indicate the ONT ID.

In the xPON profile mode, the configuration granularity of L2 services based on physical port is GEM index and the value range is 0-127. For the ADSL, SHDSL, VDSL2, OPFA, and EPON boards, an invalid value needs to be input for this leaf. For GPON boards, this leaf takes effect only in the xPON profile mode. In this case, this leaf is used to indicate the GEM index of a GPON port. In other modes, an invalid value needs to be input for this leaf.

Indicates the configured object. Options: 1. pppoeSessionCount(1) 2. pitp(2) 3. dhcpOption82(3) Enumeration: 'pppoeSessionCount': 1, 'pitp': 2, 'dhcpOption82': 3.

Indicates the value type of the configured object. Options: 1. integer(1) 2. string(2) Currently, only integer(1) is supported. Enumeration: 'integer': 1, 'string': 2.

Indicates the value of the configured object. Because some configured objects must be of the integer type while others may be of the character string type, the values of the configured objects must be input as a character string when the objects are configured through this leaf. The length of the character string is 0-255 characters. When hwIpDslamL2pPortConfigObject is set to pppoeSessionCount(1), the input range is (1..8) and the default value is 8. When hwIpDslamL2pPortConfigObject is set to pitp(2), the input range is (1..2), where 1 indicates enabled and 2 indicates disabled. The default value is 1. When hwIpDslamL2pPortConfigObject is set to dhcpOption82(3), the input range is (1..2), where 1 indicates enabled and 2 indicates disabled. The default value is 1.

This leaf must be set and issued if the configured object is the character string type. Options: 1. active(1) 2. createAndgo(4) 3. destroy(6) Currently, configured objects support only the integer type so this leaf can be ignored.

Used for setting and querying the status of L2 enhanced features based on service port. The indexes of this table are hwIpDslamL2pSrvFlowConfigIndex and hwIpDslamL2pSrvFlowConfigObject.

Used for setting and querying the status of L2 enhanced features based on service port. The indexes of this entry are hwIpDslamL2pSrvFlowConfigIndex and hwIpDslamL2pSrvFlowConfigObject.

The meaning and value of this leaf are the same as those of hwExtSrvFlowIndex in Huawei's MIB hwExtSrvFlowTable.

Indicates the configured object. 1. macSpoofingMacCount(1) -Indicates the maximum number of MAC addresses that can be bound to each service port for the anti-MAC spoofing feature. 2. maxSessionCount(2) -Indicates the maximum number of sessions that can be created on each service port for the PPPoE SMAC service. This option is supported by only the GPON service port. 3. pitp(3) -Enables/Disables PITP on a service port. 4. dhcpOption82(4) -Enables/Disables DHCP Option82 on a service port. 5. pitpForbidForwarding(5) -Not allow the user-side packet to carry PITP information. This function is enabled or disabled based on service port. 6. option82ForbidForwarding(6) -Not allow the user-side packet to carry DHCP Option82 information. This function is enabled or disabled based on service port. 7. ipoeSmacMaxIpCount(7) -Indicates the maximum number of IP addresses permitted by each service port in the IPoE SMAC mode. Enumeration: 'dhcpOption82': 4, 'pitp': 3, 'maxSessionCount': 2, 'pitpForbidForwarding': 5, 'macSpoofingMacCount': 1, 'option82ForbidForwarding': 6, 'ipoeSmacMaxIpCount': 7.

Indicates the type of the configured object. Options: 1. integer(1) 2. string(2) Currently, only integer(1) is supported. Enumeration: 'integer': 1, 'string': 2.

Indicates the value of the configured object. Because some configured objects must be of the integer type while others may be of the character string type, the values of the configured objects must be input as a character string when the objects are configured through this leaf. The length of the character string is 0-255 characters. When hwIpDslamL2pSrvFlowConfigObject is set to macSpoofingMacCount(1), the input range is {0..8} and the default value is 8. When hwIpDslamL2pSrvFlowConfigObject is set to maxSessionCount(2), the input range is {1..8} and the default value is 8. When hwIpDslamL2pSrvFlowConfigObject is set to pitp(3), the input range is {1..2}, where 1 indicates enabled and 2 indicates disabled. The default value is 1. When hwIpDslamL2pSrvFlowConfigObject is set to dhcpOption82(4), the input range is {1..2}, where 1 indicates enabled and 2 indicates disabled. The default value is 1. When hwIpDslamL2pSrvFlowConfigObject is set to pitpForbidForwarding(5), the input range is {1..2}, where 1 indicates enabled and 2 indicates disabled. The default value is 1. When hwIpDslamL2pSrvFlowConfigObject is set to option82ForbidForwarding(6), the input range is {1..2}, where 1 indicates enabled and 2 indicates disabled. The default value is 1. When hwIpDslamL2pSrvFlowConfigObject is set to ipoeSmacMaxIpCount(7), the input range is {1..8} and the default value is 8.

Indicates the row status. This leaf must be set and issued together with the configured object if the configured object is of the character string type. This leaf must not be set or issued together with the configured object if the configured object is of the integer type. For example, configured objects max-session-count and ipoe-smac-max-ip-count are of the integer type, so the row status must not be set or issued together with the configured objects in relevant operations. During the configuration of a character string type configured object, you need to set the row status to createAndGo(4) and perform the set operation. Perform the get operation to query the value of a character string type configured object. The queried value of the row status is always active(1).

Used for setting and querying the status of L2 protocol features based on VLAN. The index of this table is hwIpDslamL2pVlanCtrlIndex.

Used for setting and querying the status of L2 protocol features based on VLAN. The index of this entry is hwIpDslamL2pVlanCtrlIndex.

Used as the index for the VLAN-based feature control and is issued together with various leaves corresponding to the features to be configured. Range: 1-4095

Used for setting or querying the anti-MAC-spoofing status of the VLAN. Options: 1. disable(1) 2. enable(2) Default: disable(1) Enumeration: 'enable': 2, 'disable': 1.

Indicates the MAC address mode of a PPPoE user. Options: 1. multiMac(1) 2. singleMac(2) Default: multiMac(1) Enumeration: 'multiMac': 1, 'singleMac': 2.

The status of DhcpBroadcastControl switch. Enumeration: 'enable': 2, 'disable': 1.

Identifies the VMAC status of the specified VLAN, which is used for setting the VMAC status of the specified VLAN. Options: 1. disable(1) 2. enable(2) Default: disable(1) Enumeration: 'enable': 2, 'disable': 1.