HUAWEI-ENTITY-EXTENT-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-ENTITY-EXTENT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, P-BRIDGE-MIB, HUAWEI-MIB, ENTITY-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwEntityExtentMIB 1.3.6.1.4.1.2011.5.25.31
The private mib file includes the general extent information of the device.
       hwEntityExtObjects 1.3.6.1.4.1.2011.5.25.31.1
           hwEntityState 1.3.6.1.4.1.2011.5.25.31.1.1
               hwEntityStateTable 1.3.6.1.4.1.2011.5.25.31.1.1.1 no-access
This table contains one row per physical entity, There is always at least one row for an 'overall' physical entity. The information in each row may be not include all the object in this table, because of the entity need not some of the information here.
                   hwEntityStateEntry 1.3.6.1.4.1.2011.5.25.31.1.1.1.1 no-access
Information about a particular physical entity. Each entry provides objects (entPhysicalDescr, entPhysicalVendorType, and entPhysicalClass) to help an NMS identify and characterize the entry, and objects (entPhysicalContainedIn and entPhysicalParentRelPos) to help an NMS relate the particular entry to other entries in this table.
                       hwEntityAdminStatus 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1 hwadminstate read-write
The administrative state for this object, and it is possible to set the state when needed.
                       hwEntityOperStatus 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2 hwoperstate read-only
The operational state for this object.
                       hwEntityStandbyStatus 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3 hwstandbystatus read-only
Some entity in a device can support standby mode, This object is used for monitoring standby status.
                       hwEntityAlarmLight 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4 hwalarmstatus read-only
The alarm status for this entity. It does not include the severity of alarms raised on child components. On the condition, there are a alarm light on the entity, the object should have the same status with it.
                       hwEntityCpuUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5 integer32 read-only
The CPU usage for this entity. Generally, the CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity.
                       hwEntityCpuUsageThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6 integer32 read-write
The threshold for the CPU usage. When the CPU usage exceed the threshold, a notification will be sent.
                       hwEntityMemUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7 integer32 read-only
The memory usage for the entity. This object point out how many percent of memory has been used.
                       hwEntityMemUsageThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8 integer32 read-write
The threshold for the Memory usage, When the memory usage exceed the threshold, a notification will be sent.
                       hwEntityMemSize 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9 integer32 read-only
The size of memory for the entity.
                       hwEntityUpTime 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10 integer32 read-only
The up time for the entity. The mean of up time is when the entity is up, and the value of the object will add one per seconds while the entity running.
                       hwEntityTemperature 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11 integer32 read-only
The temperature for the entity.
                       hwEntityTemperatureThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12 integer32 read-write
The threshold for the temperature. When the temperature exceed the threshold, a notification will be sent.
                       hwEntityVoltage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13 integer32 read-only
The voltage for the entity.
                       hwEntityVoltageLowThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14 integer32 read-write
The low-threshold for the voltage. Generally, we have two threshold for the voltage, one is low-threshold, and the other is high-threshold. the normal status of voltage should be greater than the low-threshold, and lower than the high-threshold. When the voltage low than the low-threshold, a notification will be sent.
                       hwEntityVoltageHighThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15 integer32 read-write
The high-threshold for the voltage. Generally, we have two threshold for the voltage, one is low-threshold, and the other is high-threshold. the normal status of voltage should be greater than the low-threshold, and lower than the high-threshold. When the voltage greater than the high-threshold, a notification will be sent.
                       hwEntityTemperatureLowThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16 integer32 read-write
The low-threshold of temperature. If the device temperature is lower than the threshold, an alarm is raised.
                       hwEntityOpticalPower 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17 integer32 read-only
The optical power of the optical module. Unit: uW
                       hwEntityCurrent 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18 integer32 read-only
The current for the entity.
                       hwEntityMemSizeMega 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19 integer32 read-only
The size of SDRAM(Synchronous Dynamic Random Access Memory) memory for the entity. Unit: M bytes
                       hwEntityPortType 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20 integer read-only
Indicates the type of the Ethernet interface: an optical interface or an electrical interface. Enumeration: 'copper': 2, 'fiber1000': 4, 'opticalnotExist': 6, 'fiber100': 3, 'fiber10000': 5, 'optical': 7, 'notSupported': 1.
                       hwEntityDuplex 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21 integer read-only
Indicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode. Enumeration: 'notSupported': 1, 'full': 2, 'half': 3.
                       hwEntityOpticalPowerRx 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22 integer32 read-only
The optical power(Rx) of the optical module. Unit: uW
                       hwEntityCpuUsageLowThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23 integer32 read-write
The threshold for the CPU usage. When the CPU usage exceed the threshold, a notification will be sent.
                       hwEntityBoardPower 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24 integer32 read-only
The board power for the entity. Unit: W
                       hwEntityCpuFrequency 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.25 integer32 read-only
The frequency of the entity. Unit: Hz
                       hwEntitySupportFlexCard 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26 integer read-only
It describes whether the whole board supports flexible cards. When the board doesn't support flexible cards, the cards may be dummy ones whose ports will not be seen by the customer. Enumeration: 'flexible': 2, 'notSupported': 1, 'unflexible': 3, 'dummy': 4.
                       hwEntityBoardClass 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27 integer read-only
It describes the board type of the whole board. Enumeration: 'power': 8, 'lp': 3, 'sf': 4, 'lcd': 9, 'ec': 6, 'mp': 2, 'fan': 7, 'notSupported': 1, 'ic': 5.
                       hwNseOpmStatus 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.28 integer32 read-only
OPM status. 0: pass, 1: bypass, 2: invalid
                       hwEntityCpuMaxUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29 integer32 read-only
The Max CPU usage for this entity. Generally, the Max CPU usage will calculate the overall CPU usage on the entity, and it is not sensible with the number of CPU on the entity.
                       hwEntityCPUType 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30 snmpadminstring read-only
CPU type.
                       hwEntityMemoryType 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31 snmpadminstring read-only
Memory type.
                       hwEntityFlashSize 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32 integer32 read-only
Flash size, in KB.
                       hwEntityIfUpTimes 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33 integer32 read-only
Times that the interface goes Up.
                       hwEntityIfDownTimes 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34 integer32 read-only
Times that the interface goes Down.
                       hwEntityCPUAvgUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35 integer32 read-only
Average CPU usage within a specified statistical interval.
                       hwEntityMemoryAvgUsage 1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36 integer32 read-only
Average memory usage within a specified statistical interval.
               hwRUModuleInfoTable 1.3.6.1.4.1.2011.5.25.31.1.1.2 no-access
This table contains one row per replaceable unit physical entity. The row with the field 'entPhysicalIsFRU' sets to 'true' in table 'entPhysicalTable' will be mapped to one row in this table.
                   hwRUModuleInfoEntry 1.3.6.1.4.1.2011.5.25.31.1.1.2.1 no-access
Information about a replaceable unit physical entity. Each entry provides objects of a replaceable unit to help an NMS identify and characterize the entry in this table.
                       hwEntityBomId 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1 snmpadminstring read-only
The identity of the Bill of Material about this replaceable unit which coded by vendor. This node is mapping to 'ITEM' in the information file.
                       hwEntityBomEnDesc 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2 snmpadminstring read-only
The English description of the Bill of Material about this replaceable unit.
                       hwEntityBomLocalDesc 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.3 snmpadminstring read-only
The local description of the Bill of Material about this replaceable unit.
                       hwEntityManufacturedDate 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4 dateandtime read-only
The date when this physical entity is Manufactured.
                       hwEntityManufactureCode 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.5 integer32 read-only
The code of the place where this physical entity is Manufactured.
                       hwEntityCLEICode 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6 snmpadminstring read-only
The string code of CLEI which was granted by America.
                       hwEntityUpdateLog 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.7 snmpadminstring read-only
The maintenance log of this replaceable unit.
                       hwEntityArchivesInfoVersion 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8 snmpadminstring read-only
The Version of Archives Information.
                       hwEntityOpenBomId 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9 snmpadminstring read-only
The BomId for distribution. It is different from hwEntityBomId.
                       hwEntityIssueNum 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10 snmpadminstring read-only
The issue number for hardware change.
                       hwEntityBoardType 1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11 snmpadminstring read-only
The type code for entity.
               hwOpticalModuleInfoTable 1.3.6.1.4.1.2011.5.25.31.1.1.3 no-access
Table of optical module properties.
                   hwOpticalModuleInfoEntry 1.3.6.1.4.1.2011.5.25.31.1.1.3.1 no-access
An entry in the table of optical module properties for each optical module.
                       hwEntityOpticalMode 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.1 integer read-only
The mode of the optical module. Enumeration: 'noValue': 5, 'notSupported': 1, 'multiMode5': 3, 'multiMode6': 4, 'singleMode': 2.
                       hwEntityOpticalWaveLength 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.2 integer32 read-only
The wave length of the optical module. Unit: nm.
                       hwEntityOpticalTransDistance 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.3 integer32 read-only
The max transmission distance of the optical module. Unit: m.
                       hwEntityOpticalVendorSn 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4 snmpadminstring read-only
The vendor serial number (vendor SN) of the optical module. Length: 16 bytes.
                       hwEntityOpticalTemperature 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5 integer32 read-only
The current temperature of the optical module. Unit: C
                       hwEntityOpticalVoltage 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6 integer32 read-only
The current voltage of the optical module. Unit: mV.
                       hwEntityOpticalBiasCurrent 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7 integer32 read-only
The bias current of the optical module. Unit: mA.
                       hwEntityOpticalRxPower 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8 integer32 read-only
The receive power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalTxPower 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9 integer32 read-only
The transmit power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalType 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.10 integer read-only
The type of the optical module. Enumeration: 'copper': 5, 'esfp': 4, 'gbic': 2, 'unknown': 0, 'xenpak': 7, 'sfp': 3, 'transponder': 8, 'sc': 1, 'xfp': 6, 'cfp': 9.
                       hwEntityOpticalTransBW 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.11 integer32 read-only
The Transceiver max BW of the optical module.Unit:M
                       hwEntityOpticalFiberType 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.12 integer read-only
The Fiber type of the optical module. Enumeration: 'lc': 7, 'optical-pigtail': 11, 'unknown': 0, 'fiberJack': 6, 'hssdcII': 20, 'bnc-tnc': 4, 'coaxial-headers': 5, 'm': 9, 'copper-pigtail': 21, 'style-2-copper-connector': 3, 'sc': 1, 'sg': 10, 'mt-rj': 8, 'style-1-copper-connector': 2.
                       hwEntityOpticalRxLowThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.13 integer32 read-only
The receive power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalRxHighThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.14 integer32 read-only
The receive power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalTxLowThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.15 integer32 read-only
The transmit power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalTxHighThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.16 integer32 read-only
The transmit power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalPlug 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.17 integer read-only
The optical module is plug-supported or not. Enumeration: 'false': 2, 'notSupported': 0, 'true': 1.
                       hwEntityOpticalDirectionType 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.18 integer read-only
The direction type of the optical module. Enumeration: 'twoFiberBidirection': 2, 'notSupported': 1, 'twoFiberTwoPortBidirection': 4, 'oneFiberBidirection': 3.
                       hwEntityOpticalUserEeprom 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.19 displaystring read-only
The user writable EEPROM of the optical module.
                       hwEntityOpticalRxLowWarnThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.20 integer32 read-only
The receive power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalRxHighWarnThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.21 integer32 read-only
The receive power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalTxLowWarnThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.22 integer32 read-only
The transmit power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
                       hwEntityOpticalTxHighWarnThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.3.1.23 integer32 read-only
The transmit power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times
               hwMonitorInputTable 1.3.6.1.4.1.2011.5.25.31.1.1.4 no-access
This table contains one row per replaceable unit physical entity. This table is used to set the status of monitor port.
                   hwMonitorInputEntry 1.3.6.1.4.1.2011.5.25.31.1.1.4.1 no-access
This is a replaceable unit physical entity.
                       hwMonitorInputIndex 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.1 integer32 no-access
Monitor port index. This is a number of input line,ranging from 1 to 4.
                       hwMonitorInputName 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.2 displaystring read-only
Monitor line name.
                       hwMonitorInputState 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.3 hwlevelstate read-only
Monitor line status. The value is high or low.
                       hwMonitorInputStateEnable 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.4 enabledstatus read-only
Enable monitor line.
                       hwMonitorInputRowStatus 1.3.6.1.4.1.2011.5.25.31.1.1.4.1.5 rowstatus read-only
Status of monitor input row.
               hwMonitorOutputTable 1.3.6.1.4.1.2011.5.25.31.1.1.5 no-access
This table contains one row per replaceable unit physical entity. This table is used to create a output view.
                   hwMonitorOutputEntry 1.3.6.1.4.1.2011.5.25.31.1.1.5.1 no-access
This is a replaceable unit physical entity.
                       hwMonitorOutputIndex 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.1 integer32 no-access
Monitor output view index. Through this index ,you can turn into the output view.
                       hwMonitorOutputRuleIndex 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.2 integer32 no-access
Monitor output rule index. This is used to set the rules about all of the input line.
                       hwMonitorOutputMask 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.3 displaystring read-only
Monitor output mask . This is used to matching the level of monitor input line.
                       hwMonitorOutputKey 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.4 displaystring read-only
Normal level value of this output line.
                       hwMonitorOutputRowStatus 1.3.6.1.4.1.2011.5.25.31.1.1.5.1.5 rowstatus read-only
Status of monitor input row
               hwEntPowerUsedInfoTable 1.3.6.1.4.1.2011.5.25.31.1.1.6 no-access
A table of information that displays the power use of entity .
                   hwEntPowerUsedInfoEntry 1.3.6.1.4.1.2011.5.25.31.1.1.6.1 no-access
Entry of the table of information that displays the power use of entity.
                       hwEntPowerUsedInfoBoardName 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.1 octet string read-only
Board name.
                       hwEntPowerUsedInfoBoardType 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.2 octet string read-only
Board type.
                       hwEntPowerUsedInfoBoardSlot 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.3 integer32 read-only
Board's slot number.
                       hwEntPowerUsedInfoPower 1.3.6.1.4.1.2011.5.25.31.1.1.6.1.4 integer32 read-only
Used power of board.
               hwVirtualCableTestTable 1.3.6.1.4.1.2011.5.25.31.1.1.7 no-access
This table contains one row per replaceable unit physical entity. This table is used to display VCT result.
                   hwVirtualCableTestEntry 1.3.6.1.4.1.2011.5.25.31.1.1.7.1 no-access
This is a replaceable unit physical entity.
                       hwVirtualCableTestIfIndex 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.1 interfaceindex no-access
IfIndex of port that you want to test cable.
                       hwVirtualCableTestPairStatus 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.2 integer read-only
Pair status. This indicate the status of cable. Enumeration: 'abnormalOpenShort': 4, 'normal': 1, 'abnormalOpen': 2, 'unknown': 6, 'notSupport': 7, 'abnormalCrossTalk': 5, 'abnormalShort': 3.
                       hwVirtualCableTestPairLength 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.3 integer32 read-only
Pair Length. This indicate the length of cable.
                       hwVirtualCableTestOperation 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.4 integer read-write
VirtualCableTestOperation. This Operation of VirtualCableTest. Enumeration: 'startTest': 1, 'resetTestValue': 2, 'readyStartTest': 3.
                       hwVirtualCableTestLastTime 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.5 integer32 read-only
The last test time for the entity. The mean of last time is when the entity is tested, and the value of the object will add one per seconds until now.
                       hwVirtualCableTestPairAStatus 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.6 integer read-only
Pair A status. This indicate the status of cable. Enumeration: 'abnormalOpenShort': 4, 'normal': 1, 'abnormalOpen': 2, 'unknown': 6, 'notSupport': 7, 'abnormalCrossTalk': 5, 'abnormalShort': 3.
                       hwVirtualCableTestPairBStatus 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.7 integer read-only
Pair B status. This indicate the status of cable. Enumeration: 'abnormalOpenShort': 4, 'normal': 1, 'abnormalOpen': 2, 'unknown': 6, 'notSupport': 7, 'abnormalCrossTalk': 5, 'abnormalShort': 3.
                       hwVirtualCableTestPairCStatus 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.8 integer read-only
Pair C status. This indicate the status of cable. Enumeration: 'abnormalOpenShort': 4, 'normal': 1, 'abnormalOpen': 2, 'unknown': 6, 'notSupport': 7, 'abnormalCrossTalk': 5, 'abnormalShort': 3.
                       hwVirtualCableTestPairDStatus 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.9 integer read-only
Pair D status. This indicate the status of cable. Enumeration: 'abnormalOpenShort': 4, 'normal': 1, 'abnormalOpen': 2, 'unknown': 6, 'notSupport': 7, 'abnormalCrossTalk': 5, 'abnormalShort': 3.
                       hwVirtualCableTestPairALength 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.10 integer32 read-only
Pair A Length. This indicate the length of cable.
                       hwVirtualCableTestPairBLength 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.11 integer32 read-only
Pair B Length. This indicate the length of cable.
                       hwVirtualCableTestPairCLength 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.12 integer32 read-only
Pair C Length. This indicate the length of cable.
                       hwVirtualCableTestPairDLength 1.3.6.1.4.1.2011.5.25.31.1.1.7.1.13 integer32 read-only
Pair D Length. This indicate the length of cable.
               hwTemperatureThresholdTable 1.3.6.1.4.1.2011.5.25.31.1.1.8 no-access
This table lists the alarm thresholds of temperature sensors. You can read information about all the temperature sensors of the device. You can set the alarm threshold of a specified temperature sensor.
                   hwTemperatureThresholdEntry 1.3.6.1.4.1.2011.5.25.31.1.1.8.1 no-access
Defines an entry in the hwTemperatureThresholdTable.
                       hwEntityTempSlotId 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.1 integer32 read-only
This object indicates the slot ID of a temperature sensor.
                       hwEntityTempI2CId 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.2 integer32 read-only
This object indicates the I2CID of a temperature sensor.
                       hwEntityTempAddr 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.3 integer32 read-only
This object indicates the address of a temperature sensor.
                       hwEntityTempChannel 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.4 integer32 read-only
This object indicates the channel of a temperature sensor.
                       hwEntityTempStatus 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.5 integer read-only
This object indicates the current status of a temperature sensor. Enumeration: 'major': 3, 'fatal': 4, 'minor': 2, 'normal': 1.
                       hwEntityTempValue 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.6 integer32 read-only
This object indicates the current value in Celsius of a temperature sensor.
                       hwEntityTempMinorAlmThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.7 integer32 read-write
This object indicates the threshold for a minor alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.
                       hwEntityTempMajorAlmThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.8 integer32 read-write
This object indicates the threshold for a major alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.
                       hwEntityTempFatalAlmThreshold 1.3.6.1.4.1.2011.5.25.31.1.1.8.1.9 integer32 read-write
This object indicates the threshold for a fatal alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.
               hwVoltageInfoTable 1.3.6.1.4.1.2011.5.25.31.1.1.9 no-access
This table lists information about voltage sensors. You can read information about all the voltage sensors of the device. You can set the alarm threshold of a specified voltage sensor.
                   hwVoltageInfoEntry 1.3.6.1.4.1.2011.5.25.31.1.1.9.1 no-access
Defines an entry in the hwVoltageInfoTable.
                       hwEntityVolSlot 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.1 integer32 read-only
This object indicates the slot ID of a voltage sensor.
                       hwEntityVolI2CId 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.2 integer32 read-only
This object indicates the I2CID of a voltage sensor.
                       hwEntityVolAddr 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.3 integer32 read-only
This object indicates the address of a voltage sensor.
                       hwEntityVolChannel 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.4 integer32 read-only
This object indicates the channel of a voltage sensor.
                       hwEntityVolStatus 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.5 integer read-only
This object indicates the current status of a voltage sensor. Enumeration: 'major': 2, 'fatal': 3, 'normal': 1.
                       hwEntityVolRequired 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.6 integer32 read-only
This object indicates the nominal value in millivolt of a voltage sensor.
                       hwEntityVolCurValue 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.7 integer32 read-only
This object indicates the current value in millivolt of a voltage sensor.
                       hwEntityVolRatio 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.8 integer32 read-only
This object indicates the voltage ratio of a voltage sensor.
                       hwEntityVolLowAlmMajor 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.9 integer32 read-write
This object indicates the threshold for a major alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
                       hwEntityVolLowAlmFatal 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.10 integer32 read-write
This object indicates the threshold for a fatal alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
                       hwEntityVolHighAlmMajor 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.11 integer32 read-write
This object indicates the threshold for a major alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
                       hwEntityVolHighAlmFatal 1.3.6.1.4.1.2011.5.25.31.1.1.9.1.12 integer32 read-write
This object indicates the threshold for a fatal alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.
               hwFanStatusTable 1.3.6.1.4.1.2011.5.25.31.1.1.10 no-access
This table lists the status of fans. You can read the status of the fans on the device.
                     hwFanStatusEntry 1.3.6.1.4.1.2011.5.25.31.1.1.10.1 no-access
Defines an entry in the hwFanStatusTable.
                         hwEntityFanSlot 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.1 integer32 read-only
This object indicates the slot ID of a fan.
                         hwEntityFanSn 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.2 integer32 read-only
This object indicates the serial number of the fan in a certain slot.
                         hwEntityFanReg 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.3 integer read-only
This object indicates whether the fan is registered. Enumeration: 'yes': 1, 'no': 2.
                         hwEntityFanSpdAdjMode 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.4 integer read-only
This object indicates the speed adjustment mode of the fan. Enumeration: 'auto': 1, 'manual': 2, 'unknown': 3.
                         hwEntityFanSpeed 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.5 integer32 read-only
This object indicates the rotation speed (in percentage of the full speed) of the fan.
                         hwEntityFanPresent 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.6 integer read-only
This object indicates the present information of the fan. Enumeration: 'absent': 2, 'present': 1.
                         hwEntityFanState 1.3.6.1.4.1.2011.5.25.31.1.1.10.1.7 integer read-only
This object indicates the state of the fan. Enumeration: 'abnormal': 2, 'normal': 1.
               hwEntityGlobalPara 1.3.6.1.4.1.2011.5.25.31.1.1.11
                     hwEntityServiceType 1.3.6.1.4.1.2011.5.25.31.1.1.11.1 integer read-only
It describes the service-type of spu board . Enumeration: 'wlan': 6, 'load-balance': 3, 'firewall': 2, 'netstream': 5, 'sslvpn': 1, 'ipsec': 4.
               hwPortBip8StatisticsTable 1.3.6.1.4.1.2011.5.25.31.1.1.12 no-access
Indicates the BIP8 statistics. This table lists the various BIP8 statistics.
                     hwPortBip8StatisticsEntry 1.3.6.1.4.1.2011.5.25.31.1.1.12.1 no-access
Indicates the BIP8 statistics. This table lists the various BIP8 statistics.
                         hwPhysicalPortBip8StatisticsEB 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.1 counter64 read-only
BIP8 Statistics: EB(Errored Block).
                         hwPhysicalPortBip8StatisticsES 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.2 counter64 read-only
BIP8 Statistics: ES(Errored Second).
                         hwPhysicalPortBip8StatisticsSES 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.3 counter64 read-only
BIP8 Statistics: SES(Severely Errored Second).
                         hwPhysicalPortBip8StatisticsUAS 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.4 counter64 read-only
BIP8 Statistics: UAS(Unavailable Errored Second).
                         hwPhysicalPortBip8StatisticsBBE 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.5 counter64 read-only
BIP8 Statistics: BBE(Background Block Error).
                         hwPhysicalPortSpeed 1.3.6.1.4.1.2011.5.25.31.1.1.12.1.6 unsigned32 read-only
An estimate of the interface's current bandwidth in 1000000 bits per second.
       hwEntityExtTraps 1.3.6.1.4.1.2011.5.25.31.2
           hwEntityExtTrapsPrefix 1.3.6.1.4.1.2011.5.25.31.2.0
               hwEntityExtTemperatureThresholdNotification 1.3.6.1.4.1.2011.5.25.31.2.0.1
The hwEntityEnvTemperatureThresholdNotification indicates the temperature have been exceed the threshold. In the condition, user should check the hardware and the environment of the entity, sometimes it happened because of the failture of air-condition. Anyway, the threshold should lower than the value that most service work fine.
               hwEntityExtVoltageLowThresholdNotification 1.3.6.1.4.1.2011.5.25.31.2.0.2
The hwEntityExtVoltageLowThresholdNotification indicates the voltage is lower than the threshold. This may decrease the usability of the entity. If the voltage is lower too much than the hardware needed, the entity will stop working. Anyway, the threshold should higher than the value that most service work fine.
               hwEntityExtVoltageHighThresholdNotification 1.3.6.1.4.1.2011.5.25.31.2.0.3
The hwEntityExtVoltageHighThresholdNotification indicates the voltage is higher than the threshold. This may decrease the usability of the entity. If the voltage is higher too much than the hardware needed, the entity may be destroyed by the high voltage. Anyway, the threshold should lower than the value that most service work fine.
               hwEntityExtCpuUsageThresholdNotfication 1.3.6.1.4.1.2011.5.25.31.2.0.4
The hwEntityExtCpuUsageThresholdNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine.
               hwEntityExtMemUsageThresholdNotification 1.3.6.1.4.1.2011.5.25.31.2.0.5
The hwEntityExtMemUsageThresholdNotification indicates the entity is overload, and the service running in the entity will not get the performance it should because of lower memory. Anyway, the threshold should lower than the value that most service work fine.
               hwEntityExtOperEnabled 1.3.6.1.4.1.2011.5.25.31.2.0.6
The entity is operational. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings.
               hwEntityExtOperDisabled 1.3.6.1.4.1.2011.5.25.31.2.0.7
The entity is operational. The entity this notification refers can be identified by extracting the entPhysicalIndex from one of the variable bindings.
               hwEntityExtMonitorBoardAbnormalNotification 1.3.6.1.4.1.2011.5.25.31.2.0.8
The monitor board turns normal to abnormal.
               hwEntityExtMonitorBoardNormalNotification 1.3.6.1.4.1.2011.5.25.31.2.0.9
The monitor board turns abnormal to normal.
               hwEntityExtMonitorPortAbnormalNotification 1.3.6.1.4.1.2011.5.25.31.2.0.10
The monitor port turns normal to abnormal.
               hwEntityExtMonitorPortNormalNotification 1.3.6.1.4.1.2011.5.25.31.2.0.11
The monitor port turns abnormal to normal.
               hwEntityExtCpuUsageLowThresholdNotfication 1.3.6.1.4.1.2011.5.25.31.2.0.12
The hwEntityExtCpuUsageThresholdNotfication indicates the entity is overload, and the service running in the entity will not get the performance it should because of CPU's performance. Anyway, the threshold should lower than the value that most service work fine.
       hwDevicePowerInfoObjects 1.3.6.1.4.1.2011.5.25.31.3
           hwDevicePowerInfoTotalPower 1.3.6.1.4.1.2011.5.25.31.3.1 integer32 read-only
Device total power.
           hwDevicePowerInfoUsedPower 1.3.6.1.4.1.2011.5.25.31.3.2 integer32 read-only
Device used power.
       hwEntityExtConformance 1.3.6.1.4.1.2011.5.25.31.4
           hwEntityExtCompliances 1.3.6.1.4.1.2011.5.25.31.4.1
               hwEntityExtCompliance 1.3.6.1.4.1.2011.5.25.31.4.1.1
The compliance statement for systems supporting the HUAWEI Entity extent MIB.
           hwEntityExtGroups 1.3.6.1.4.1.2011.5.25.31.4.2
               hwEntityExtGroup 1.3.6.1.4.1.2011.5.25.31.4.2.1
Standard HUAWEI Entity Extent group.
               hwEntityExtNotificationGroup 1.3.6.1.4.1.2011.5.25.31.4.2.2
Standard HUAWEI Entity Extent Notification group.
               hwRUModuleInfoGroup 1.3.6.1.4.1.2011.5.25.31.4.2.3
Standard HUAWEI Entity Extent group.
               hwEntityExtOldObjectsGroup 1.3.6.1.4.1.2011.5.25.31.4.2.4
Group for old objects that may be obsoleted.
               hwOpticalModuleInfoGroup 1.3.6.1.4.1.2011.5.25.31.4.2.5
Collection of objects that display the fiber module working information.
               hwMonitorInputGroup 1.3.6.1.4.1.2011.5.25.31.4.2.6
Standard HUAWEI Entity Extent group.
               hwMonitorOutputGroup 1.3.6.1.4.1.2011.5.25.31.4.2.7
Standard HUAWEI Entity Extent group.
               hwEntPowerUsedInfoGroup 1.3.6.1.4.1.2011.5.25.31.4.2.8
Collection of objects that display the power informations of entity.
               hwDevicePowerInfoGroup 1.3.6.1.4.1.2011.5.25.31.4.2.9
Collection of objects that display the power informations of device.
               hwVirtualCableTestGroup 1.3.6.1.4.1.2011.5.25.31.4.2.10
Collection of objects that display the status of cable.
               hwTemperatureThresholdGroup 1.3.6.1.4.1.2011.5.25.31.4.2.11
Temperature threshold group.
               hwVoltageInfoGroup 1.3.6.1.4.1.2011.5.25.31.4.2.12
Voltage info group.
               hwFanStatusGroup 1.3.6.1.4.1.2011.5.25.31.4.2.13
fan state group.
               hwPnpGroup 1.3.6.1.4.1.2011.5.25.31.4.2.14
Pnp group.
               hwSystemGlobalGroup 1.3.6.1.4.1.2011.5.25.31.4.2.15
System global group.
               hwHeartbeatGroup 1.3.6.1.4.1.2011.5.25.31.4.2.16
Heart beat group.
               hwPortBip8StatisticsObjectGroup 1.3.6.1.4.1.2011.5.25.31.4.2.17
The BIP8 statistics group.
               hwPredisposeGroup 1.3.6.1.4.1.2011.5.25.31.4.2.18
Pnp group.
       hwPnpObjects 1.3.6.1.4.1.2011.5.25.31.5
           hwPnpInfo 1.3.6.1.4.1.2011.5.25.31.5.1
               hwHardwareCapaSequenceNo 1.3.6.1.4.1.2011.5.25.31.5.1.1 snmpadminstring read-only
This object indicates the sequence number of the 'hardware capability file'.The value consists of the file version number and CRC code.
           hwPnpTraps 1.3.6.1.4.1.2011.5.25.31.5.2
               hwHardwareCapaChangeNotification 1.3.6.1.4.1.2011.5.25.31.5.2.1
This object indicates the change of the 'hardware capability file'. An alarm is generated if the sequence number of the 'hardware capability file' in the current startup file is different from that in the last startup file.
           hwPnpOperateTable 1.3.6.1.4.1.2011.5.25.31.5.3 no-access
This table describes the hardware functions. Using this table, you can obtain the specified 'hardware description file' or 'hardware capability file'.
               hwPnpOperateEntry 1.3.6.1.4.1.2011.5.25.31.5.3.1 no-access
                   hwFileGeneIndex 1.3.6.1.4.1.2011.5.25.31.5.3.1.1 integer32 no-access
The value of this object identifies the operation index, which can be specified by the user. The value ranges from 1 to 2147483647.
                   hwFileGeneOperState 1.3.6.1.4.1.2011.5.25.31.5.3.1.2 integer read-only
The value of this object identifies the operation status. opInProgress(1): The operation is ongoing. opSuccess(2): The operation succeeds. opGetFileError(3): Obtaining the file fails. opInvalidDestName(4): The specified storage path is invalid. opNoFlashSpace(5): The space in the flash memory is insufficient. opWriteFileError(6): Writing the file fails. opDestoryError(7): Deleting the file fails. Enumeration: 'opInProgress': 1, 'opInvalidDestName': 4, 'opNoFlashSpace': 5, 'opDestoryError': 7, 'opWriteFileError': 6, 'opGetFileError': 3, 'opSuccess': 2.
                   hwFileGeneResourceType 1.3.6.1.4.1.2011.5.25.31.5.3.1.3 integer read-write
This object indicates the type of the file to be obtained. pnpcard(1): board description file pnpcard(2): subcard description file pnphardcapability(3): hardware capability file pnpPreDisposeCapability(4): predispose capability file Enumeration: 'pnphardcapability': 3, 'pnpcard': 1, 'pnpsubcard': 2, 'pnpPreDisposeCapability': 4.
                   hwFileGeneResourceID 1.3.6.1.4.1.2011.5.25.31.5.3.1.4 snmpadminstring read-write
This object indicates the ID of the 'hardware capability file' to be obtained.
                   hwFileGeneDestinationFile 1.3.6.1.4.1.2011.5.25.31.5.3.1.5 snmpadminstring read-write
This object indicates the target path storing the file, which does not need to be specified.
                   hwFileGeneRowStatus 1.3.6.1.4.1.2011.5.25.31.5.3.1.6 rowstatus read-only
This object indicates the row status. active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
       hwSystemGlobalObjects 1.3.6.1.4.1.2011.5.25.31.6
           hwEntitySystemNetID 1.3.6.1.4.1.2011.5.25.31.6.1 octet string read-write
Network element ID.
           hwEntitySoftwareName 1.3.6.1.4.1.2011.5.25.31.6.2 snmpadminstring read-only
System software name.
           hwEntitySoftwareVersion 1.3.6.1.4.1.2011.5.25.31.6.3 snmpadminstring read-only
Software version number.
           hwEntitySoftwareVendor 1.3.6.1.4.1.2011.5.25.31.6.4 snmpadminstring read-only
Software vendor.
           hwEntitySystemModel 1.3.6.1.4.1.2011.5.25.31.6.5 snmpadminstring read-only
Device model.
           hwEntitySystemTime 1.3.6.1.4.1.2011.5.25.31.6.6 snmpadminstring read-write
System time displayed on the device.
           hwEntitySystemMacAddress 1.3.6.1.4.1.2011.5.25.31.6.7 snmpadminstring read-only
MAC address of the device.
           hwEntitySystemReset 1.3.6.1.4.1.2011.5.25.31.6.8 integer read-write
System reset. Enumeration: 'restart': 2, 'normal': 1.
           hwEntitySystemHealthInterval 1.3.6.1.4.1.2011.5.25.31.6.9 integer32 read-write
Statistical interval for average CPU and memory usage, in seconds (By default, the value is 300) .
           hwEntitySystemNEId 1.3.6.1.4.1.2011.5.25.31.6.10 integer32 read-write
Systme NEId.
       hwHeartbeatObjects 1.3.6.1.4.1.2011.5.25.31.7
           hwHeartbeatConfig 1.3.6.1.4.1.2011.5.25.31.7.1
               hwEntityHeartbeatOnOff 1.3.6.1.4.1.2011.5.25.31.7.1.1 integer read-write
Whether Heartbeat sending periodically enabled. Enumeration: 'on': 1, 'off': 2.
               hwEntityHeartbeatPeriod 1.3.6.1.4.1.2011.5.25.31.7.1.2 integer32 read-write
Heartbeat sending period detected in the trap reporting channel, with the minimum value of 60 seconds.
           hwHeartbeatTrapPrefix 1.3.6.1.4.1.2011.5.25.31.7.2
               hwEntityHeartbeatTrap 1.3.6.1.4.1.2011.5.25.31.7.2.1
Heartbeat trap.
       hwPreDisposeObjects 1.3.6.1.4.1.2011.5.25.31.8
           hwPreDisposeInfo 1.3.6.1.4.1.2011.5.25.31.8.1
               hwPreDisposeSequenceNo 1.3.6.1.4.1.2011.5.25.31.8.1.1 snmpadminstring read-only
This object indicates the sequence number of the 'predispose capability file'.The value consists of the file version number and CRC code.
           hwPreDisposedTraps 1.3.6.1.4.1.2011.5.25.31.8.2
               hwInsertDiffFromPreDisposed 1.3.6.1.4.1.2011.5.25.31.8.2.1
This object indicates the type of the inserted entity is different from that of pre-disposed entity on the slot.
               hwPreDisposedChangeNotification 1.3.6.1.4.1.2011.5.25.31.8.2.2
This object indicates the change of the 'predispose capability file'. An alarm is generated if the sequence number of the 'predispose capability file' in the current startup file is different from that in the last startup file.
           hwPreDisposeConfigTable 1.3.6.1.4.1.2011.5.25.31.8.3 no-access
Table of predisposing boards or flexible subcards.
               hwPreDisposeConfigEntry 1.3.6.1.4.1.2011.5.25.31.8.3.1 no-access
Entry of the table to predispose boards or flexible subcards.
                   hwDisposeSlot 1.3.6.1.4.1.2011.5.25.31.8.3.1.1 integer32 read-write
This object indicates the slot ID of predisposed board.
                   hwDisposeCardId 1.3.6.1.4.1.2011.5.25.31.8.3.1.2 integer32 read-write
This object indicates the card ID of predisposed subcard.
                   hwDisposeSbom 1.3.6.1.4.1.2011.5.25.31.8.3.1.3 octet string read-write
This object indicates the sbom information of predisposed board or subcard.
                   hwDisposeRowStatus 1.3.6.1.4.1.2011.5.25.31.8.3.1.4 rowstatus read-only
This object indicates the row status when config predispose. active(1) notInService(2) notReady(3) createAndGo(4) createAndWait(5) destroy(6)
                   hwDisposeOperState 1.3.6.1.4.1.2011.5.25.31.8.3.1.5 integer read-only
The value of this object identifies the operation status. opSuccess(1): The operation succeeds. opInProgress(2): The operation is ongoing. opDevNotSupportPredispose(3): The device does not support predispose. opCardNotSupportPredispose(4): The type of card or subcard is not supported to be predisposed on this device. opAlreadyPredispose(5): The slot or subslot has already been predisposed. opCardConflict(6): The slot or subslot to be predisposed conflict with others. opDevOperationError(7): Other error occurs on the device. Enumeration: 'opInProgress': 2, 'opDevOperationError': 7, 'opDevNotSupportPredispose': 3, 'opAlreadyPredispose': 5, 'opSuccess': 1, 'opCardNotSupportPredispose': 4, 'opCardConflict': 6.
           hwPreDisposeEntInfoTable 1.3.6.1.4.1.2011.5.25.31.8.4 no-access
This table is used to get the information of predisposed entitys.
               hwPreDisposeEntInfoEntry 1.3.6.1.4.1.2011.5.25.31.8.4.1 no-access
Entry of the table to get the information of predisposed entitys.
                   hwDisposeEntPhysicalIndex 1.3.6.1.4.1.2011.5.25.31.8.4.1.1 physicalindex no-access
The index for this entry.
                   hwDisposeEntPhysicalDescr 1.3.6.1.4.1.2011.5.25.31.8.4.1.2 snmpadminstring read-only
A textual description of predisposed physical entity.This object should contain a string which identifies the manufacturer's name for the physical entity.
                   hwDisposeEntPhysicalVendorType 1.3.6.1.4.1.2011.5.25.31.8.4.1.3 autonomoustype read-only
An indication of the vendor-specific hardware type of the predisposed physical entity.
                   hwDisposeEntPhysicalContainedIn 1.3.6.1.4.1.2011.5.25.31.8.4.1.4 integer32 read-only
The value of 'entPhysicalContainedIn' for the predisposed physical entity.
                   hwDisposeEntPhysicalClass 1.3.6.1.4.1.2011.5.25.31.8.4.1.5 physicalclass read-only
An indication of the general hardware type of the predisposed physical entity.
                   hwDisposeEntPhysicalParentRelPos 1.3.6.1.4.1.2011.5.25.31.8.4.1.6 integer32 read-only
An indication of the relative position of this 'child' component among all its 'sibling' components.
                   hwDisposeEntPhysicalName 1.3.6.1.4.1.2011.5.25.31.8.4.1.7 snmpadminstring read-only
The textual name of the predisposed physical entity.