HUAWEI-ENT-VOICE-SIPAG-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-ENT-VOICE-SIPAG-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwEntVoiceSipagMIB 1.3.6.1.4.1.2011.5.25.250
This mib is used for defining huawei's SIP MIB objects, which provides SIP management.
         hwEntSipAgConfigTable 1.3.6.1.4.1.2011.5.25.250.1 no-access
This table is used to config the parameters of SipAg. The index of this table is hwEntSipAgId.
             hwEntSipAgConfigEntry 1.3.6.1.4.1.2011.5.25.250.1.1 no-access
This table is used to config the parameters of SipAg. The index of this entry is hwEntSipAgId.
                 hwEntSipAgId 1.3.6.1.4.1.2011.5.25.250.1.1.1 integer32 no-access
Sipag ID.
                 hwEntSipAgMediaIPAddress 1.3.6.1.4.1.2011.5.25.250.1.1.2 ipaddress read-only
Indicates the media IP address.
                 hwEntSipAgSignallingIPAddress 1.3.6.1.4.1.2011.5.25.250.1.1.3 ipaddress read-only
Indicates the signalling IP address.
                 hwEntSipAgSignallingPort 1.3.6.1.4.1.2011.5.25.250.1.1.4 integer32 read-only
Indicates the signalling port.
                 hwEntSipAgMediaAddrName 1.3.6.1.4.1.2011.5.25.250.1.1.5 displaystring read-only
Indicates the dynamic media IP name.
                 hwEntSipAgSignallingAddrName 1.3.6.1.4.1.2011.5.25.250.1.1.6 displaystring read-only
Indicates the dynamic signalliing IP name.
                 hwEntSipAgTransMode 1.3.6.1.4.1.2011.5.25.250.1.1.7 integer read-only
Indicates the transfer mode. Options: tcp(1) -TCP udp(2) -UDP sctp(3) -SCTP Default: udp(2) Enumeration: 'udp': 2, 'sctp': 3, 'tcp': 1.
                 hwEntSipAgDomainName 1.3.6.1.4.1.2011.5.25.250.1.1.8 displaystring read-only
Indicates the domain name of sipag.
                 hwEntSipAgHomeDomainName 1.3.6.1.4.1.2011.5.25.250.1.1.9 displaystring read-only
Indicates the home domain name.
                 hwEntSipAgRegisterUri 1.3.6.1.4.1.2011.5.25.250.1.1.10 displaystring read-only
Indicates the Register-URI.
                 hwEntSipAgConferenceFactoryUri 1.3.6.1.4.1.2011.5.25.250.1.1.11 displaystring read-only
Indicates the ConferenceFactory-URI.
                 hwEntSipAgDesc 1.3.6.1.4.1.2011.5.25.250.1.1.12 displaystring read-only
Indicates the Description.
                 hwEntSipAgPhoneContext 1.3.6.1.4.1.2011.5.25.250.1.1.13 displaystring read-only
Indicates the Phone Context.
                 hwEntSipAgRowStatus 1.3.6.1.4.1.2011.5.25.250.1.1.14 rowstatus read-only
This is used to create new rows in this table, modify existing rows, and delete existing rows.
                 hwEntSipAgAdminStatus 1.3.6.1.4.1.2011.5.25.250.1.1.15 integer read-only
Indicates the AdminStatus. Options: reset(1) -reset switchover(2) -switchover Enumeration: 'reset': 1, 'switchover': 2.
                 hwEntSipAgSwitchoverDestination 1.3.6.1.4.1.2011.5.25.250.1.1.16 integer32 read-only
Indicates the target proxy of switchover. Options: 0: primary proxy 1: secondary proxy
                 hwEntSipAgProfileIndex 1.3.6.1.4.1.2011.5.25.250.1.1.17 integer32 read-only
Indicates the ProfileIndex. Default: 1
                 hwEntSipAgProfileName 1.3.6.1.4.1.2011.5.25.250.1.1.18 displaystring read-only
Indicates the ProfileName.
                 hwEntSipAgSrvLogicIndex 1.3.6.1.4.1.2011.5.25.250.1.1.19 integer32 read-only
Indicates the servelogic index. Default: 0
                 hwEntSipAgSrvLogicName 1.3.6.1.4.1.2011.5.25.250.1.1.20 displaystring read-only
Indicates the servelogic name.
                 hwEntSipAgServerDhcpOption 1.3.6.1.4.1.2011.5.25.250.1.1.21 integer read-only
Indicates the DHCP option. Options: none(1) -none option120(2) -option120 option21(3) -option21 Default: none(1) Enumeration: 'option21': 3, 'none': 1, 'option120': 2.
                 hwEntSipAgAuthMode 1.3.6.1.4.1.2011.5.25.250.1.1.22 integer read-only
Indicates the user authentication mode. Options: interface(1) -interface user(2) -single user Default: user(2) Enumeration: 'interface': 1, 'user': 2.
                 hwEntSipAgAuthUserName 1.3.6.1.4.1.2011.5.25.250.1.1.23 displaystring read-only
Indicates the auth username.
                 hwEntSipAgAuthPasswordMode 1.3.6.1.4.1.2011.5.25.250.1.1.24 integer read-only
Indicates the auth password mode. Options: password(1) -auth by password ha1(2) -auth by ha1 Default: password(1) Enumeration: 'ha1': 2, 'password': 1.
                 hwEntSipAgAuthPassword 1.3.6.1.4.1.2011.5.25.250.1.1.25 displaystring read-only
Indicates the auth password.
                 hwEntSipAgAuthHA1 1.3.6.1.4.1.2011.5.25.250.1.1.26 displaystring read-only
Indicates the auth ha1 password.
                 hwEntSipAgSubUAProfile 1.3.6.1.4.1.2011.5.25.250.1.1.27 integer read-only
Indicates the flag to subscribe to UA-Profile. Options: enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgSubRegState 1.3.6.1.4.1.2011.5.25.250.1.1.28 integer read-only
Indicates the flag to subscribe to REG-STATE. Options: enable(1) disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgSubMwi 1.3.6.1.4.1.2011.5.25.250.1.1.29 integer read-only
Indicates the flag to subscribe to MWI. Options: enable(1) disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgSdpNegoMode 1.3.6.1.4.1.2011.5.25.250.1.1.30 integer read-only
Indicates the SDP negotiation mode. Options: local(1) -Local end takes priority when codec negotiation remote(2) -Remote end takes priority when codec negotiation Default: remote(2) Enumeration: 'local': 1, 'remote': 2.
                 hwEntSipAgProxyDualHome 1.3.6.1.4.1.2011.5.25.250.1.1.31 integer read-only
Indicates the mode of supporting proxy dual-homing. Options: no(1) -not support proxy dual-homing dualhome(2) -support proxy dual-homing, but not support auto switchover autoswitchover(3) -support proxy dual-homing and auto switchover Default: dualhome(2) Enumeration: 'autoswitchover': 3, 'dualhome': 2, 'no': 1.
                 hwEntSipAgProxyDetectMode 1.3.6.1.4.1.2011.5.25.250.1.1.32 integer read-only
Indicate the proxy detection mode. Options: option(1) -detect proxy by option message probe(2) -detect proxy by probe mode register(3) -detect proxy by register message Default: probe(2) Enumeration: 'probe': 2, 'option': 1, 'register': 3.
                 hwEntSipAgProxyRefreshMode 1.3.6.1.4.1.2011.5.25.250.1.1.33 integer read-only
Indicate Proxy address refresh mode. Options: immediate(1) -immediate switch defer(2) -switch in no calls cases no-switch(3) -no switch null(255) -invalid value Enumeration: 'defer': 2, 'no-switch': 3, 'null': 255, 'immediate': 1.
         hwEntSipAgRunningTable 1.3.6.1.4.1.2011.5.25.250.2 no-access
This table is used to query the running parameters. The index of this table is hwEntSipAgId.
             hwEntSipAgRunningEntry 1.3.6.1.4.1.2011.5.25.250.2.1 no-access
This table is used to query the running parameters. The index of this entry is hwEntSipAgId.
                 hwEntSipAgRunningId 1.3.6.1.4.1.2011.5.25.250.2.1.1 integer32 no-access
Sipag ID.
                 hwEntSipAgRunningMediaIPAddress 1.3.6.1.4.1.2011.5.25.250.2.1.2 ipaddress read-only
Indicates the media ip address.
                 hwEntSipAgRunningSignallingIPAddress 1.3.6.1.4.1.2011.5.25.250.2.1.3 ipaddress read-only
Indicates the signalling ip address.
                 hwEntSipAgRunningSignallingPort 1.3.6.1.4.1.2011.5.25.250.2.1.4 integer32 read-only
Indicates the Signalling Port.
                 hwEntSipAgRunningMediaAddrName 1.3.6.1.4.1.2011.5.25.250.2.1.5 displaystring read-only
Indicates the current dynamic media IP name.
                 hwEntSipAgRunningSignallingAddrName 1.3.6.1.4.1.2011.5.25.250.2.1.6 displaystring read-only
Indicates the current dynamic signalling IP name.
                 hwEntSipAgRunningTransMode 1.3.6.1.4.1.2011.5.25.250.2.1.7 integer read-only
Indicates the Transfer Mode. null(255) means the interface is not started. Options: tcp(1) -TCP udp(2) -UDP sctp(3) -SCTP null(255) -interface is not started Enumeration: 'udp': 2, 'null': 255, 'sctp': 3, 'tcp': 1.
                 hwEntSipAgRunningDomainName 1.3.6.1.4.1.2011.5.25.250.2.1.8 displaystring read-only
Indicates the domain name of sipag.
                 hwEntSipAgRunningHomeDomainName 1.3.6.1.4.1.2011.5.25.250.2.1.9 displaystring read-only
Indicates the home domain name.
                 hwEntSipAgRunningRegisterUri 1.3.6.1.4.1.2011.5.25.250.2.1.10 displaystring read-only
Indicates the register-URI.
                 hwEntSipAgRunningConferenceFactoryUri 1.3.6.1.4.1.2011.5.25.250.2.1.11 displaystring read-only
Indicates the conferencefactory-URI.
                 hwEntSipAgRunningDesc 1.3.6.1.4.1.2011.5.25.250.2.1.12 displaystring read-only
Indicates the description of sipag.
                 hwEntSipAgRunningPhoneContext 1.3.6.1.4.1.2011.5.25.250.2.1.13 displaystring read-only
Indicates the phone context.
                 hwEntSipAgRunningProfileIndex 1.3.6.1.4.1.2011.5.25.250.2.1.14 integer32 read-only
Indicates the profile index.
                 hwEntSipAgRunningProfileName 1.3.6.1.4.1.2011.5.25.250.2.1.15 displaystring read-only
Indicates the ProfileName.
                 hwEntSipAgRunningSrvLogicIndex 1.3.6.1.4.1.2011.5.25.250.2.1.16 integer32 read-only
Indicates the servelogic index.
                 hwEntSipAgRunningSrvLogicName 1.3.6.1.4.1.2011.5.25.250.2.1.17 displaystring read-only
Indicates the servelogic name.
                 hwEntSipAgRunningServerDhcpOption 1.3.6.1.4.1.2011.5.25.250.2.1.18 integer read-only
Indicates the DHCP option. Options: none(1) -none option120(2) -option120 option21(3) -option21 Enumeration: 'option21': 3, 'none': 1, 'option120': 2.
                 hwEntSipAgRunningAuthMode 1.3.6.1.4.1.2011.5.25.250.2.1.19 integer read-only
Indicates user authentication mode. Options: interface(1) -interface user(2) -single user Enumeration: 'interface': 1, 'user': 2.
                 hwEntSipAgRunningAuthUserName 1.3.6.1.4.1.2011.5.25.250.2.1.20 displaystring read-only
Indicates the auth username.
                 hwEntSipAgRunningAuthPasswordMode 1.3.6.1.4.1.2011.5.25.250.2.1.21 integer read-only
Indicates the auth password mode. Options: password(1) -password ha1(2) -HA1 Enumeration: 'ha1': 2, 'password': 1.
                 hwEntSipAgRunningAuthPassword 1.3.6.1.4.1.2011.5.25.250.2.1.22 displaystring read-only
Indicates the auth password.
                 hwEntSipAgRunningAuthHA1 1.3.6.1.4.1.2011.5.25.250.2.1.23 displaystring read-only
Indicates the auth ha1 password.
                 hwEntSipAgRunningSubUAProfile 1.3.6.1.4.1.2011.5.25.250.2.1.24 integer read-only
Indicates the flag to subscribe to UA-Profile. Options: enable(1) disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgRunningSubRegState 1.3.6.1.4.1.2011.5.25.250.2.1.25 integer read-only
Indicates the flag to subscribe to REG-STATE. Options: enable(1) disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgRunningSubMwi 1.3.6.1.4.1.2011.5.25.250.2.1.26 integer read-only
Indicates the flag to subscribe to MWI. Options: enable(1) disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgRunningSdpNegoMode 1.3.6.1.4.1.2011.5.25.250.2.1.27 integer read-only
Indicates the SDP negotiation mode. Options: local(1) -local first remote(2) -remote first Enumeration: 'local': 1, 'remote': 2.
                 hwEntSipAgRunningProxyDualHome 1.3.6.1.4.1.2011.5.25.250.2.1.28 integer read-only
Indicate the mode of supporting proxy dual-homing. Options: no(1) -not support proxy dual-homing dualhome(2) -support proxy dual-homing, but not support auto switchover autoswitchover(3) -support proxy dual-homing and auto switchover Enumeration: 'autoswitchover': 3, 'dualhome': 2, 'no': 1.
                 hwEntSipAgRunningProxyDetectMode 1.3.6.1.4.1.2011.5.25.250.2.1.29 integer read-only
Indicates the proxy detection mode. Options: option(1) -detection proxy by option message probe(2) -detection proxy by probe mode register(3) -detection proxy by register message Enumeration: 'probe': 2, 'option': 1, 'register': 3.
                 hwEntSipAgRunningProxyRefreshMode 1.3.6.1.4.1.2011.5.25.250.2.1.30 integer read-only
Indicate Proxy address refresh mode. Options: immediate(1) -immediate switch defer(2) -switch in no calls cases no-switch(3) -no switch Enumeration: 'defer': 2, 'no-switch': 3, 'immediate': 1.
                 hwEntSipAgRunningState 1.3.6.1.4.1.2011.5.25.250.2.1.31 integer read-only
Indicate the sipag state. Options: notStart(1) fault(2) normal(3) Enumeration: 'notStart': 1, 'fault': 2, 'normal': 3.
         hwEntSipAgProxyTable 1.3.6.1.4.1.2011.5.25.250.3 no-access
This table is used to config the parameters of sipag proxy. The indexes of this table are hwEntSipAgId, hwSipAgProxyIndex.
             hwEntSipAgProxyEntry 1.3.6.1.4.1.2011.5.25.250.3.1 no-access
This table is used to config the parameters of sipag proxy. The indexes of this entry are hwEntSipAgId, hwSipAgProxyIndex.
                 hwEntSipAgProxyId 1.3.6.1.4.1.2011.5.25.250.3.1.1 integer32 no-access
Sipag ID.
                 hwSipAgProxyIndex 1.3.6.1.4.1.2011.5.25.250.3.1.2 integer32 no-access
proxy index. 0: main 1: standby
                 hwSipAgProxyIPAddress1 1.3.6.1.4.1.2011.5.25.250.3.1.3 ipaddress read-write
Indicates the proxy IP address1.
                 hwSipAgProxyIPAddress2 1.3.6.1.4.1.2011.5.25.250.3.1.4 ipaddress read-write
Indicates the proxy IP address2.
                 hwSipAgProxyPort 1.3.6.1.4.1.2011.5.25.250.3.1.5 integer32 read-write
Indicates the proxy port.
                 hwSipAgProxyDomainName 1.3.6.1.4.1.2011.5.25.250.3.1.6 displaystring read-write
Indicates the proxy domain name.
                 hwSipAgProxyAddressMode 1.3.6.1.4.1.2011.5.25.250.3.1.7 integer read-write
The proxy address mode. ip(1) dnsA(2) dnsSrv(3) dnsNaptr(4) Enumeration: 'dnsNaptr': 4, 'ip': 1, 'dnsA': 2, 'dnsSrv': 3.
         hwEntSipAgProxyRunningTable 1.3.6.1.4.1.2011.5.25.250.4 no-access
This table is used to query the running parameters of sipag proxy. The indexes of this table are hwEntSipAgId, hwSipAgProxyIndex.
             hwEntSipAgProxyRunningEntry 1.3.6.1.4.1.2011.5.25.250.4.1 no-access
This table is used to query the running parameters sipag proxy. The indexes of this entry are hwEntSipAgId, hwSipAgProxyIndex.
                 hwEntSipAgProxyRunningId 1.3.6.1.4.1.2011.5.25.250.4.1.1 integer32 no-access
Sipag ID.
                 hwSipAgProxyRunningIndex 1.3.6.1.4.1.2011.5.25.250.4.1.2 integer32 no-access
proxy index. 0: main 1: standby
                 hwSipAgProxyRunningIPAddress1 1.3.6.1.4.1.2011.5.25.250.4.1.3 ipaddress read-only
Indicates the proxy IP address1.
                 hwSipAgProxyRunningIPAddress2 1.3.6.1.4.1.2011.5.25.250.4.1.4 ipaddress read-only
Indicates the proxy IP address2.
                 hwSipAgProxyRunningPort 1.3.6.1.4.1.2011.5.25.250.4.1.5 integer32 read-only
Indicates the Proxy Port.
                 hwSipAgProxyRunningDomainName 1.3.6.1.4.1.2011.5.25.250.4.1.6 displaystring read-only
Indicates the proxy domain name.
                 hwSipAgProxyRunningAddressMode 1.3.6.1.4.1.2011.5.25.250.4.1.7 integer read-only
The proxy address mode. ip(1) dnsA(2) dnsSrv(3) dnsNaptr(4) Enumeration: 'dnsNaptr': 4, 'ip': 1, 'dnsA': 2, 'dnsSrv': 3.
                 hwSipAgProxyRunningState 1.3.6.1.4.1.2011.5.25.250.4.1.8 integer read-only
The proxy state. unknown(1) down(2) up(3) Enumeration: 'down': 2, 'unknown': 1, 'up': 3.
         hwEntSipProfileTable 1.3.6.1.4.1.2011.5.25.250.5 no-access
This table is used to query the sipag profile. The index of this table is hwEntSipProfileIndex.
             hwEntSipProfileEntry 1.3.6.1.4.1.2011.5.25.250.5.1 no-access
This table is used to config the Sip Profile. The index of this entry is hwEntSipProfileIndex.
                 hwEntSipProfileIndex 1.3.6.1.4.1.2011.5.25.250.5.1.1 integer32 no-access
Indicates the index of sipprofile.
                 hwEntSipProfileName 1.3.6.1.4.1.2011.5.25.250.5.1.2 displaystring read-only
Indicates the name of sipprofile.
         hwEntSipSrvLogicTable 1.3.6.1.4.1.2011.5.25.250.6 no-access
This table is used to config the Sip Serve-Logic list. The index of this table is hwEntSipSrvLogicIndex.
             hwEntSipSrvLogicEntry 1.3.6.1.4.1.2011.5.25.250.6.1 no-access
This table is used to config the sip serve-logic list. The index of this entry is hwEntSipSrvLogicIndex.
                 hwEntSipSrvLogicIndex 1.3.6.1.4.1.2011.5.25.250.6.1.1 integer32 no-access
Indicates the index of serve-logic.
                 hwEntSipSrvLogicName 1.3.6.1.4.1.2011.5.25.250.6.1.2 displaystring read-only
Indicates the name of serve-logic.
         hwEntSipAgDmmParaTable 1.3.6.1.4.1.2011.5.25.250.7 no-access
This table is used to config the digitmap. The index of this table is hwEntSipAgId.
             hwEntSipAgDmmParaEntry 1.3.6.1.4.1.2011.5.25.250.7.1 no-access
This table is used to config the digitmap. The index of this entry is hwEntSipAgId.
                 hwEntSipAgDmmParaId 1.3.6.1.4.1.2011.5.25.250.7.1.1 integer32 no-access
Sipag ID.
                 hwEntSipAgDmmParaStartTimer 1.3.6.1.4.1.2011.5.25.250.7.1.2 integer32 read-write
Indicates the length of the DMM start timer. Default: 20 Unit: second
                 hwEntSipAgDmmParaShortTimer 1.3.6.1.4.1.2011.5.25.250.7.1.3 integer32 read-write
Indicates the length of the DMM short timer. Default: 4 Unit: second
                 hwEntSipAgDmmParaLongTimer 1.3.6.1.4.1.2011.5.25.250.7.1.4 integer32 read-write
Indicates the length of the DMM long timer. Default: 20 Unit: second
         hwEntSipAgUserGroupTable 1.3.6.1.4.1.2011.5.25.250.8 no-access
This table is used to config the parameters of sip user group. The index of this table is hwEntSipAgUserGroupName.
             hwEntSipAgUserGroupEntry 1.3.6.1.4.1.2011.5.25.250.8.1 no-access
This table is used to config the parameters of sip user group. The index of this entry is hwEntSipAgUserGroupName.
                 hwEntSipAgUserGroupSipAgId 1.3.6.1.4.1.2011.5.25.250.8.1.1 integer32 no-access
Sipag ID.
                 hwEntSipAgUserGroupId 1.3.6.1.4.1.2011.5.25.250.8.1.2 integer32 no-access
User Group ID.
                 hwEntSipAgUserGroupRegisterUriMode 1.3.6.1.4.1.2011.5.25.250.8.1.3 integer read-only
Indicates the user group register URI mode. Options: inneruser(1) -inner user alone(2) -alone Enumeration: 'inneruser': 1, 'alone': 2.
                 hwEntSipAgUserGroupUri 1.3.6.1.4.1.2011.5.25.250.8.1.4 displaystring read-only
Indicates the Register-URI of the sip user group without the domain.
                 hwEntSipAgUserGroupGrpName 1.3.6.1.4.1.2011.5.25.250.8.1.5 displaystring read-only
Indicates the sip user group Name.
                 hwEntSipAgUserGroupAuthUserName 1.3.6.1.4.1.2011.5.25.250.8.1.6 displaystring read-only
Indicates the Auth Username of the sip user group.
                 hwEntSipAgUserGroupAuthPassWordMode 1.3.6.1.4.1.2011.5.25.250.8.1.7 integer read-only
Indicates the Auth PasswordMode of the sip user group. Options: password(1) -auth by password ha1(2) -auth by HA1 Default: password(1) Enumeration: 'ha1': 2, 'password': 1.
                 hwEntSipAgUserGroupAuthPassword 1.3.6.1.4.1.2011.5.25.250.8.1.8 displaystring read-only
Indicates the Auth Password of the sip user group.
                 hwEntSipAgUserGroupAuthHA1 1.3.6.1.4.1.2011.5.25.250.8.1.9 displaystring read-only
Indicates the Auth HA1 value of the sip user group.
                 hwEntSipAgUserGroupPrecinctMode 1.3.6.1.4.1.2011.5.25.250.8.1.10 integer read-only
Indicates the user PrecinctMode in the sip user group. Options: local(1) remote(2) Default: local(1) Enumeration: 'local': 1, 'remote': 2.
                 hwEntSipAgUserGroupSubUaProfile 1.3.6.1.4.1.2011.5.25.250.8.1.11 integer read-only
Indicates the flag of the user group with the same UA Profile privilege. Options: enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntSipAgUserGroupRowStatus 1.3.6.1.4.1.2011.5.25.250.8.1.12 rowstatus read-only
This is used to create new rows in this table, modify existing rows, and to delete existing rows.
                 hwEntSipAgUserGroupAdminStatus 1.3.6.1.4.1.2011.5.25.250.8.1.13 integer read-only
Indicates the admin operation of the sip user group. Options: startservice(1) -start service endservice(2) -end service Enumeration: 'startservice': 1, 'endservice': 2.
                 hwEntSipAgUserGroupRunningState 1.3.6.1.4.1.2011.5.25.250.8.1.14 integer read-only
Indicates the service state of user group. Options: startSvc(1) -start service rBlock(2) -remote block lBlock(3) -local block Enumeration: 'lBlock': 3, 'startSvc': 1, 'rBlock': 2.
         hwEntSipAgSoftNumberParaTable 1.3.6.1.4.1.2011.5.25.250.9 no-access
This table is used to config the soft number parameters of sipag. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftNumberParaNo.
             hwEntSipAgSoftNumberParaEntry 1.3.6.1.4.1.2011.5.25.250.9.1 no-access
This table is used to config the soft number parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftNumberParaNo.
                 hwEntSipAgSoftNumberParaId 1.3.6.1.4.1.2011.5.25.250.9.1.1 integer32 no-access
Sipag ID.
                 hwEntSipAgSoftNumberParaNo 1.3.6.1.4.1.2011.5.25.250.9.1.2 integer32 no-access
The number of sip mg soft number parameter.
                 hwEntSipAgSoftNumberParaValue 1.3.6.1.4.1.2011.5.25.250.9.1.3 integer32 read-write
The value of sip mg soft number parameter.
         hwEntSipAgSoftStringParaTable 1.3.6.1.4.1.2011.5.25.250.10 no-access
This table is used to config the soft string Parameters of SIP interface. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
               hwEntSipAgSoftStringParaEntry 1.3.6.1.4.1.2011.5.25.250.10.1 no-access
This table is used to config the soft string parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
                   hwEntSipAgSoftStringParaId 1.3.6.1.4.1.2011.5.25.250.10.1.1 integer32 no-access
Sipag ID.
                   hwEntSipAgSoftStringParaNo 1.3.6.1.4.1.2011.5.25.250.10.1.2 integer32 no-access
The number of sip mg soft string parameter.
                   hwEntSipAgSoftStringParaValue 1.3.6.1.4.1.2011.5.25.250.10.1.3 displaystring read-write
The value of sip mg soft string parameter.
         hwEntSipAgSoftStringParaRunningTable 1.3.6.1.4.1.2011.5.25.250.11 no-access
This table is used to query the running soft string parameters of sipag. The indexes of this table are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
               hwEntSipAgSoftStringParaRunningEntry 1.3.6.1.4.1.2011.5.25.250.11.1 no-access
This table is used to query the running soft string parameters of sipag. The indexes of this entry are hwEntSipAgId, hwEntSipAgSoftStringParaNo.
                   hwEntSipAgSoftStringParaRunningId 1.3.6.1.4.1.2011.5.25.250.11.1.1 integer32 no-access
Sipag ID.
                   hwEntSipAgSoftStringParaRunningNo 1.3.6.1.4.1.2011.5.25.250.11.1.2 integer32 no-access
The number of sip mg soft string parameter.
                   hwEntSipAgSoftStringParaRunningValue 1.3.6.1.4.1.2011.5.25.250.11.1.3 displaystring read-only
The value of sip mg soft string parameter.
         hwEntFaxModemParaTable 1.3.6.1.4.1.2011.5.25.250.12 no-access
This table is used to config the fax and modem parameters of sipag. The index of this table is hwEntSipAgId.
               hwEntFaxModemParaEntry 1.3.6.1.4.1.2011.5.25.250.12.1 no-access
This table is used to config the fax parameter. The index of this entry is hwEntSipAgId.
                   hwEntFaxSipAgId 1.3.6.1.4.1.2011.5.25.250.12.1.1 integer32 no-access
Sipag ID.
                   hwEntFaxTransMode 1.3.6.1.4.1.2011.5.25.250.12.1.2 integer read-write
Indicates the fax transmission mode. Options: thoroughly(1) -use voice codec t38(2) -use T.38 codec Default: thoroughly(1) Enumeration: 'thoroughly': 1, 't38': 2.
                   hwEntModemTransMode 1.3.6.1.4.1.2011.5.25.250.12.1.3 integer read-write
Indicates the modem transmission mode. Options: thoroughly(1) -Thoroughly transmission relay(2) -Relay mode Default: thoroughly(1) Enumeration: 'thoroughly': 1, 'relay': 2.
                   hwEntFaxModemNegoMode 1.3.6.1.4.1.2011.5.25.250.12.1.4 integer read-write
Indicates the negotiate mode. Options: negotiate(1) -negotiate selfswitch(2) -do not negotiate Default: negotiate(1) Enumeration: 'selfswitch': 2, 'negotiate': 1.
                   hwEntFaxModemParaVbdCodec 1.3.6.1.4.1.2011.5.25.250.12.1.5 integer read-write
Indicates the codec of VBD. Options: g711a(1) -G.711A g711u(2) -G.711U Default: g711a(1) Enumeration: 'g711a': 1, 'g711': 2.
                   hwEntFaxModemParaVbdPtType 1.3.6.1.4.1.2011.5.25.250.12.1.6 integer read-write
Indicates the payload type of VBD. Options: static(1) -static payload type dynamic(2) -dynamic payload type Default: static(1) Enumeration: 'static': 1, 'dynamic': 2.
                   hwEntFaxModemVbdAttributeType 1.3.6.1.4.1.2011.5.25.250.12.1.7 integer read-write
Indicate the format of session attribute lines when starting fax VBD negotiation. Options: v152(1) -v.152 format chinatelecom(2) -chinatelecom format chinatelecomext(3) -chinatelecom ext format ietf(4) -ietf format Default: v152(1) Enumeration: 'ietf': 4, 'v152': 1, 'chinatelecom': 2, 'chinatelecomext': 3.
                   hwEntFaxModemRtpInterval 1.3.6.1.4.1.2011.5.25.250.12.1.8 integer read-write
Indicates the default RTP packet time of DSP channel. Options: pt5ms(1) pt10ms(2) pt20ms(3) pt30ms(4) Default: pt10ms(2) Enumeration: 'pt5ms': 1, 'pt30ms': 4, 'pt20ms': 3, 'pt10ms': 2.
         hwEntDtmfParaTable 1.3.6.1.4.1.2011.5.25.250.13 no-access
This table is used to config the DTMF parameter of sipag. The index of this table is hwEntSipAgId.
               hwEntDtmfParaEntry 1.3.6.1.4.1.2011.5.25.250.13.1 no-access
This table is used to config the DTMF parameter of sipag. The index of this entry is hwEntSipAgId.
                   hwEntDtmfSipAgId 1.3.6.1.4.1.2011.5.25.250.13.1.1 integer32 no-access
Sipag ID.
                   hwEntDtmfTransMode 1.3.6.1.4.1.2011.5.25.250.13.1.2 integer read-write
Indicates the transmission mode of DTMF. Options: thoroughly(1) -transparent transmission erase(2) -erase DTMF Default: thoroughly(1) Enumeration: 'thoroughly': 1, 'erase': 2.
         hwEntNteTable 1.3.6.1.4.1.2011.5.25.250.14 no-access
This table is used to config the nte parameter of sipag. The index of this table is hwEntSipAgId.
               hwEntNteEntry 1.3.6.1.4.1.2011.5.25.250.14.1 no-access
This table is used to config the nte parameter of sipag. The index of this entry is hwEntSipAgId..
                   hwEntNteSipAgId 1.3.6.1.4.1.2011.5.25.250.14.1.1 integer32 no-access
Sipag ID.
                   hwEntNteNegoMode 1.3.6.1.4.1.2011.5.25.250.14.1.2 integer read-write
Indicates the start mode of NTE. Options: negoStart(1) -negotiate start fixedStart(2) -fixed start noInitiativeStart(3) -no initiative start Default: noInitiativeStart(3) Enumeration: 'noInitiativeStart': 3, 'negoStart': 1, 'fixedStart': 2.
                   hwEntNteFaxModem 1.3.6.1.4.1.2011.5.25.250.14.1.3 integer read-write
Indicates the flag of fax and modem event using nte parameter. Options: enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
                   hwEntNteFlashHook 1.3.6.1.4.1.2011.5.25.250.14.1.4 integer read-write
Indicates the enabled flag of flash hook event using nte parameter. Options: enable(1) disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                   hwEntNteDtmf 1.3.6.1.4.1.2011.5.25.250.14.1.5 integer read-write
Indicates the enabled flag of dtmf using nte parameter. Options: enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
         hwEntRedundancyTable 1.3.6.1.4.1.2011.5.25.250.15 no-access
This table is used to config the redundancy parameter. The index of this table is hwEntSipAgId.
               hwEntRedundancyEntry 1.3.6.1.4.1.2011.5.25.250.15.1 no-access
This table is used to config the redundancy parameter of sipag. The index of this entry is hwEntSipAgId.
                   hwEntRedundancySipAgId 1.3.6.1.4.1.2011.5.25.250.15.1.1 integer32 no-access
Sipag ID.
                   hwEntRedundancyNegoMode 1.3.6.1.4.1.2011.5.25.250.15.1.2 integer read-write
Indicates the start mode of the redundancy. Options: negoStart(1) -negotiate start fixedStart(2) -fixed start noInitiativeStart(3) -no initiative start Default: noInitiativeStart(3) Enumeration: 'noInitiativeStart': 3, 'negoStart': 1, 'fixedStart': 2.
                   hwEntRedundancyStartMode 1.3.6.1.4.1.2011.5.25.250.15.1.3 integer read-write
Indicates the start mode of the redundancy. Options: smartRedundancy(1) -smart start redundancy ordinaryRedundancy(2) -start redundancy ordinary Default: ordinaryRedundancy(2) Enumeration: 'smartRedundancy': 1, 'ordinaryRedundancy': 2.
                   hwEntRedundancyNte 1.3.6.1.4.1.2011.5.25.250.15.1.4 integer read-write
Indicates the enabled flag of NTE with using redundancy. Options: enable(1) disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                   hwEntRedundancyVbd 1.3.6.1.4.1.2011.5.25.250.15.1.5 integer read-write
Indicates the enabled flag of the VBD using redundancy. Options: enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
                   hwEntRedundancyVoice 1.3.6.1.4.1.2011.5.25.250.15.1.6 integer read-write
Indicates the enabled flag of voice using redundancy. Options: 1. enable(1) 2. disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
         hwEntVoiceSipagConformance 1.3.6.1.4.1.2011.5.25.250.16
               hwEntVoiceSipagCompliances 1.3.6.1.4.1.2011.5.25.250.16.1
                   hwEntVoiceSipagCompliance 1.3.6.1.4.1.2011.5.25.250.16.1.1
The compliance statement for systems supporting the this module.
               hwEntVoiceSipagGroups 1.3.6.1.4.1.2011.5.25.250.16.2
                   hwEntSipAgConfigGroup 1.3.6.1.4.1.2011.5.25.250.16.2.1
The hwEntSipAgConfig group.
                   hwEntSipAgRunningGroup 1.3.6.1.4.1.2011.5.25.250.16.2.2
The hwEntSipAgRunning group.
                   hwEntSipAgProxyGroup 1.3.6.1.4.1.2011.5.25.250.16.2.3
The hwEntSipAgProxy group.
                   hwEntSipAgProxyRunningGroup 1.3.6.1.4.1.2011.5.25.250.16.2.4
The hwEntSipAgProxyRunning group.
                   hwEntSipProfileGroup 1.3.6.1.4.1.2011.5.25.250.16.2.5
The hwEntSipProfile group.
                   hwEntSipSrvLogicGroup 1.3.6.1.4.1.2011.5.25.250.16.2.6
The hwEntSipSrvLogic group.
                   hwEntSipAgDmmParaGroup 1.3.6.1.4.1.2011.5.25.250.16.2.7
The hwEntSipAgDmmPara group.
                   hwEntSipAgUserGroupGroup 1.3.6.1.4.1.2011.5.25.250.16.2.8
The hwEntSipAgUserGroup group.
                   hwEntSipAgSoftNumberParaGroup 1.3.6.1.4.1.2011.5.25.250.16.2.9
The hwEntSipAgSoftNumberPara group.
                   hwEntSipAgSoftStringParaGroup 1.3.6.1.4.1.2011.5.25.250.16.2.10
The hwEntSipAgSoftStringPara group.
                   hwEntSipAgSoftStringParaRunningGroup 1.3.6.1.4.1.2011.5.25.250.16.2.11
The hwEntSipAgSoftStringParaRunningGroup group.
                   hwEntFaxModemParaGroup 1.3.6.1.4.1.2011.5.25.250.16.2.12
The hwEntFaxModemPara group.
                   hwEntDtmfParaGroup 1.3.6.1.4.1.2011.5.25.250.16.2.13
The hwEntDtmfPara group.
                   hwEntNteGroup 1.3.6.1.4.1.2011.5.25.250.16.2.14
The hwEntNte group.
                   hwEntRedundancyGroup 1.3.6.1.4.1.2011.5.25.250.16.2.15
The hwEntRedundancy group.