HUAWEI-ENT-VOICE-PORT-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: HUAWEI-ENT-VOICE-PORT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HUAWEI-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hwEntVoicePortMIB 1.3.6.1.4.1.2011.5.25.252
huawei VOICE PORT mib.
         hwEntFxsPortConfigTable 1.3.6.1.4.1.2011.5.25.252.1 no-access
Indicates the attribute configuration table of fxs ports.
             hwEntFxsPortConfigEntry 1.3.6.1.4.1.2011.5.25.252.1.1 no-access
Indicates the attribute configuration entry of fxs ports.
                 hwEntFxsPortIndex 1.3.6.1.4.1.2011.5.25.252.1.1.1 integer32 no-access
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntFxsPortSendGain 1.3.6.1.4.1.2011.5.25.252.1.1.2 integer32 read-write
Indicates the send gain the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 dB 12: -1 dB 13: -1.5 dB 14: -2 dB 15: -2.5 dB 16: -3 dB 17: -3.5 dB 18: -4 dB 19: -4.5 dB 20: -5 dB 21: -5.5 dB 22: -6 dB Default: 10
                 hwEntFxsPortRecvGain 1.3.6.1.4.1.2011.5.25.252.1.1.3 integer32 read-write
Indicates the receive gain the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9: -4.5 dB 10: -5 dB 11: -5.5 dB 12: -6 dB 13: -6.5 dB 14: -7 dB 15: -7.5 dB 16: -8 dB 17: -8.5 dB 18: -9 dB 19: -9.5 dB 20: -10 dB 21: -10.5 dB 22: -11 dB 23: -11.5 dB 24: -12 dB Default: 14
                 hwEntFxsPortDialMode 1.3.6.1.4.1.2011.5.25.252.1.1.4 integer read-write
Indicates the dialing mode. Options: dtmfPulseBoth(1) -DTMF pulse both dtmfOnly(2) -DTMF only pulseOnly(3) -Pulse only Default: dtmfPulseBoth(1) Enumeration: 'pulseOnly': 3, 'dtmfPulseBoth': 1, 'dtmfOnly': 2.
                 hwEntFxsPortReversePoleEnable 1.3.6.1.4.1.2011.5.25.252.1.1.5 integer read-write
Indicates whether to support the polarity-reversing pulse. Options: enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntFxsPortReversePoleLevel 1.3.6.1.4.1.2011.5.25.252.1.1.6 integer32 read-write
Indicates the level width of the polarity-reversing pulse. Default: 100 Unit: ms Step: 10 ms.
                 hwEntFxsPortPolarityReverseMode 1.3.6.1.4.1.2011.5.25.252.1.1.7 integer read-write
Indicates the polarity reversal mode. Options: hard(1) -Hard polarity reversal soft(2) -Soft polarity reversal Default: hard(1) Enumeration: 'hard': 1, 'soft': 2.
                 hwEntFxsPortLineLock 1.3.6.1.4.1.2011.5.25.252.1.1.8 integer read-write
Indicates whether to support lock port. enable(1) disable(2) Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntFxsPortNlpMode 1.3.6.1.4.1.2011.5.25.252.1.1.9 integer read-write
Indicates the Nlp mode of the port. normal(1) -Normal mode ecGainAdjust(2) -Ec gain adjust mode enhance(3) -Enhance mode reduce(4) -Reduce mode disable(5): -Close mode Default: normal(1) Enumeration: 'enhance': 3, 'disable': 5, 'reduce': 4, 'ecGainAdjust': 2, 'normal': 1.
                 hwEntFxsPortClipReversePole 1.3.6.1.4.1.2011.5.25.252.1.1.10 integer read-write
Indicates whether to support the polarity-reversing pulse when Clip. enable(1) disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntFxsPortImpedance 1.3.6.1.4.1.2011.5.25.252.1.1.11 integer32 read-write
Indicates the port impedance of the board. Each value corresponds to the required impedance in a specified scenario. 0: Bureau machine in China (200+680|| 100nf) 1: User machine in China (200+560|| 100nf) 2: 600-ohm interface 3: Interface of Russia (150+510|| 47nf) 4: (220+820|| 115nf ) 5: (220+820|| 120nf ) 6: 900-ohm interface 7: Interface of Brazil (800|| 50nf) 8: BT0(Zin=87+1052||228nF+229||28.4nF, Zload=93+615||471nF+179||495nF+244||32nF) 9: HK_BT3(Zin=370+620|| 310nf,Zload=600) 10: HK_BT5(Zin=270+264|| 357nf+1434|| 265nf,Zload=600) 11: BT1(BT0 without AGC) 12: BT2(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(270 +264 //357nF+1434 //265nF)) 13: BT3(Zin=(87 +1052 //228nF+229 //28.4nF),Zload=(164 +162 //363nF+1227 //350nF)) 14: Commonly used in Europe (Zin= 270+750|| 150nf) 15: New zealand (Zin=370+620|| 310nf) Default: 2
                 hwEntFxsPortCurrent 1.3.6.1.4.1.2011.5.25.252.1.1.12 integer32 read-write
Port current supported by the board. The value ranges from 0 to 1, which indicates the port current value. 0: 16mA steady current 1: 20mA steady current Default: 1
                 hwEntFxsPortHighLevel 1.3.6.1.4.1.2011.5.25.252.1.1.13 integer32 read-write
Indicates the high power level width. Default: 100 Unit: ms
                 hwEntFxsPortLowLevel 1.3.6.1.4.1.2011.5.25.252.1.1.14 integer32 read-write
Indicates the low power level width. Default: 300 Unit: ms
                 hwEntFxsPortKcType 1.3.6.1.4.1.2011.5.25.252.1.1.15 integer read-write
Indicates the KC type. Options: 1. type16kc(1) 2. type12kc(2) Default: type16kc(1) Enumeration: 'type12kc': 2, 'type16kc': 1.
                 hwEntFxsPortVoltage 1.3.6.1.4.1.2011.5.25.252.1.1.16 integer32 read-write
Indicates the valid voltage value of KC. 0: 0.45 Vrms 1: 0.775 Vrms 2: 1.0 Vrms 3: 1.5 Vrms 4: 2.0 Vrms 5: 2.5 Vrms 6: 3.0 Vrms 7: 3.5 Vrms 8: 4.0 Vrms 9: 4.5 Vrms Default: 5
                 hwEntFxsPortActualSendGain 1.3.6.1.4.1.2011.5.25.252.1.1.17 integer32 read-only
Indicates the actual send gain of the fxs port. 0: 5 dB 1: 4.5 dB 2: 4 dB 3: 3.5 dB 4: 3 dB 5: 2.5 dB 6: 2 dB 7: 1.5 dB 8: 1 dB 9: 0.5 dB 10: 0 dB 11: -0.5 dB 12: -1 dB 13: -1.5 dB 14: -2 dB 15: -2.5 dB 16: -3 dB 17: -3.5 dB 18: -4 dB 19: -4.5 dB 20: -5 dB 21: -5.5 dB 22: -6 dB 255: null
                 hwEntFxsPortActualRecvGain 1.3.6.1.4.1.2011.5.25.252.1.1.18 integer32 read-only
Indicates the actual receive gain of the fxs port. 0: 0 dB 1: -0.5 dB 2: -1 dB 3: -1.5 dB 4: -2 dB 5: -2.5 dB 6: -3 dB 7: -3.5 dB 8: -4 dB 9: -4.5 dB 10: -5 dB 11: -5.5 dB 12: -6 dB 13: -6.5 dB 14: -7 dB 15: -7.5 dB 16: -8 dB 17: -8.5 dB 18: -9 dB 19: -9.5 dB 20: -10 dB 21: -10.5 dB 22: -11 dB 23: -11.5 dB 24: -12 dB 255: null
         hwEntFxsPortOperTable 1.3.6.1.4.1.2011.5.25.252.2 no-access
Indicates the operation table (management, maintenance, and status query) of the fxs ports.
             hwEntFxsPortOperEntry 1.3.6.1.4.1.2011.5.25.252.2.1 no-access
Indicates the operation entry (management, maintenance, and status query) of the fxs ports.
                 hwEntFxsPortOperIndex 1.3.6.1.4.1.2011.5.25.252.2.1.1 integer32 no-access
Indicates the FxsPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntFxsPortSrvState 1.3.6.1.4.1.2011.5.25.252.2.1.2 integer read-only
Indicates state of the fxs port. Options: normal(1) fault(2) deactive(3) powerdeny(4) Enumeration: 'powerdeny': 4, 'fault': 2, 'normal': 1, 'deactive': 3.
                 hwEntFxsPortAdminState 1.3.6.1.4.1.2011.5.25.252.2.1.3 integer read-only
Indicates admin state of the fxs port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) Enumeration: 'noLoopNoTest': 1, 'remoteLoopNoTest': 5, 'localLoopTest': 4, 'remoteLoopTest': 6, 'localLoopNoTest': 3, 'noLoopTest': 2.
                 hwEntFxsPortLineState 1.3.6.1.4.1.2011.5.25.252.2.1.4 integer read-only
Indicates line state of the fxs port. Options: normal(1) onEarth(2) unknown(3) Enumeration: 'unknown': 3, 'onEarth': 2, 'normal': 1.
                 hwEntFxsPortAdminOper 1.3.6.1.4.1.2011.5.25.252.2.1.5 integer read-write
Indicates operation type the fxs port. Options: remoteLoop(1) localLoop(2) cancelLoop(3) Enumeration: 'localLoop': 2, 'cancelLoop': 3, 'remoteLoop': 1.
         hwEntBraPortConfigTable 1.3.6.1.4.1.2011.5.25.252.3 no-access
Indicates the attribute configuration table of the bra port.
             hwEntBraPortConfigEntry 1.3.6.1.4.1.2011.5.25.252.3.1 no-access
Indicates the attribute configuration entry of the bra port.
                 hwEntBraPortIndex 1.3.6.1.4.1.2011.5.25.252.3.1.1 integer32 no-access
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntBraPortRemotePower 1.3.6.1.4.1.2011.5.25.252.3.1.2 integer read-write
Indicates whether to support remote power supply. Options: enable(1) -Supported disable(2) -Not supported Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntBraPortAutoDeactive 1.3.6.1.4.1.2011.5.25.252.3.1.3 integer read-write
Indicates whether to support automatic deactivation. Options: enable(1) -Supported disable(2) -Not supported Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntBraPortAutoDeactiveDelay 1.3.6.1.4.1.2011.5.25.252.3.1.4 integer32 read-write
Indicates the automatic deactivation delay of the bra port. Default: 30 Unit: second.
                 hwEntBraPortWorkMode 1.3.6.1.4.1.2011.5.25.252.3.1.5 integer read-write
Indicates the bra port working mode. p2mp(1) -Point to multi-point p2p(2) -Point to point Default: p2mp(1) Enumeration: 'p2mp': 1, 'p2p': 2.
                 hwEntBraPortL1ActiveMode 1.3.6.1.4.1.2011.5.25.252.3.1.6 integer read-write
Indicates layer 1 active mode of the bra port. Options: stable(1) unstable(2) Default: unstable(2). Enumeration: 'unstable': 2, 'stable': 1.
                 hwEntBraPortUniAlarmReport 1.3.6.1.4.1.2011.5.25.252.3.1.7 integer read-write
Indicates whether to support user network interface fault alarm. enable(1) -Supported disable(2) -Not supported Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntBraPortL2Monitor 1.3.6.1.4.1.2011.5.25.252.3.1.8 integer read-write
Indicates whether to support layer 2 error statistic. enable(1) -Supported disable(2) -Not supported Default: enable(1) Enumeration: 'enable': 1, 'disable': 2.
         hwEntBraPortOperTable 1.3.6.1.4.1.2011.5.25.252.4 no-access
Indicates the operation table (management, maintenance, and status query) of the bra ports.
             hwEntBraPortOperEntry 1.3.6.1.4.1.2011.5.25.252.4.1 no-access
Indicates the operation entry (management, maintenance, and status query) of the bra ports.
                 hwEntBraPortOperIndex 1.3.6.1.4.1.2011.5.25.252.4.1.1 integer32 no-access
Indicates the BrPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntBraPortSrvState 1.3.6.1.4.1.2011.5.25.252.4.1.2 integer read-only
Indicates state of the bra port. Options: normal(1) fault(2) deactive(3) powerdeny(4) Enumeration: 'powerdeny': 4, 'fault': 2, 'normal': 1, 'deactive': 3.
                 hwEntBraPortAdminState 1.3.6.1.4.1.2011.5.25.252.4.1.3 integer read-only
Indicates admin state of the bra port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) Enumeration: 'noLoopNoTest': 1, 'remoteLoopNoTest': 5, 'localLoopTest': 4, 'remoteLoopTest': 6, 'localLoopNoTest': 3, 'noLoopTest': 2.
                 hwEntBraPortAlarmState 1.3.6.1.4.1.2011.5.25.252.4.1.4 bits read-only
Indicates the alarm state of the bra port, from left to right, each bit represents one alarm state. 0 means no alarm present,1 means the alarm present. bit0: LT overload bit1: S port fault(EI2) bit2: U port fault(LOS/RSY) bit3: S port deactive(SAI) bit4: U port deactive(ACT) Bits: 'bit4': 4, 'bit3': 3, 'bit2': 2, 'bit1': 1, 'bit0': 0.
                 hwEntBraPortAdminOper 1.3.6.1.4.1.2011.5.25.252.4.1.5 integer read-write
Indicates operation type the bra port. Options: remoteLoop(1) localLoop(2) cancelLoop(3) Enumeration: 'localLoop': 2, 'cancelLoop': 3, 'remoteLoop': 1.
         hwEntVe1PortConfigTable 1.3.6.1.4.1.2011.5.25.252.5 no-access
Indicates the attribute configuration table of the ve1 ports.
             hwEntVe1PortConfigEntry 1.3.6.1.4.1.2011.5.25.252.5.1 no-access
Indicates the attribute configuration entry of the ve1 ports.
                 hwEntVe1PortIndex 1.3.6.1.4.1.2011.5.25.252.5.1.1 integer32 no-access
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntVe1PortFrameCheckMode 1.3.6.1.4.1.2011.5.25.252.5.1.2 integer read-write
Indicates the CRC4 frame check mode of the ve1 port. Options: enable(1) disable(2) Default: disable(2) Enumeration: 'enable': 1, 'disable': 2.
                 hwEntVe1PortImpedance 1.3.6.1.4.1.2011.5.25.252.5.1.3 integer read-write
Indicates impedance of the ve1 port. Options: ohm75(1) ohm120(2) Default: ohm75(1) Enumeration: 'ohm75': 1, 'ohm120': 2.
                 hwEntVe1PortSignalType 1.3.6.1.4.1.2011.5.25.252.5.1.4 integer read-write
Indicates signal type of the ve1 port. Options: ccs(1) cas(2) Default: ccs(1) Enumeration: 'cas': 2, 'ccs': 1.
                 hwEntVe1PortAccessMode 1.3.6.1.4.1.2011.5.25.252.5.1.5 integer read-write
Indicates physical layer digital section access mode of the ve1 port. Options: digitalAccess(1) directAccess(2) Default:digitalAccess(1) Enumeration: 'directAccess': 2, 'digitalAccess': 1.
                 hwEntVe1PortL2Monitor 1.3.6.1.4.1.2011.5.25.252.5.1.6 integer read-write
Indicates whether to support layer 2 error statistic of the ve1 port. enable(1) disable(2) Default: enable(1). Enumeration: 'enable': 1, 'disable': 2.
                 hwEntVe1PortErrAlarmSwitch 1.3.6.1.4.1.2011.5.25.252.5.1.7 bits read-write
Indicates ve1 error alarm switches, from left to right, each bit respresent a switch. 0 means disable, 1 means enable. bit0: report pcm line fault alarm. bit1: when error rate reached ULF(Unconditional Line Failure) threshold, report pcm line fault alarm. bit2: when error rate reached OLF(Optional Line Failure) threshold, report pcm line fault alarm. bit3: when error rate reached LDT(Line Disturbance Transient Event) threshold, report ve1 digital line transient event alarm. bit4: when E1 frame slip frequency exceeded in observation interval reached degraded threshold, report event alarm. bit5: when any line temporary event occurs, report event alarm. Default: 111000 Bits: 'bit5': 5, 'bit4': 4, 'bit3': 3, 'bit2': 2, 'bit1': 1, 'bit0': 0.
         hwEntVe1PortOperTable 1.3.6.1.4.1.2011.5.25.252.6 no-access
Indicates the operation table (management, maintenance, and status query) of the ve1 ports.
             hwEntVe1PortOperEntry 1.3.6.1.4.1.2011.5.25.252.6.1 no-access
Indicates the operation entry (management, maintenance, and status query) of the ve1 ports.
                 hwEntVe1PortOperIndex 1.3.6.1.4.1.2011.5.25.252.6.1.1 integer32 no-access
Indicates the Ve1PortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntVe1PortSrvState 1.3.6.1.4.1.2011.5.25.252.6.1.2 integer read-only
Indicates state of the ve1 port. Options: normal(1) fault(2) lineAbnormal(3) powerdeny(4) Enumeration: 'powerdeny': 4, 'fault': 2, 'lineAbnormal': 3, 'normal': 1.
                 hwEntVe1PortAdminState 1.3.6.1.4.1.2011.5.25.252.6.1.3 integer read-only
Indicates admin state of the ve1 port. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) Enumeration: 'noLoopNoTest': 1, 'remoteLoopNoTest': 5, 'localLoopTest': 4, 'remoteLoopTest': 6, 'localLoopNoTest': 3, 'noLoopTest': 2.
                 hwEntVe1PortWarningState 1.3.6.1.4.1.2011.5.25.252.6.1.4 bits read-only
Indicates the alarm status of the ve1 line. 0 means no alarm present, 1 means the alarm present. bit0: LOS alarm bit1: AIS alarm bit2: LFA alarm bit3: LMFA alarm bit4: RRA alarm bit5: CRCER alarm bit6: SCOL alarm bit7: ULF alarm bit8: OLF alarm bit9: LDT alarm bit10: error second alarm,in direction ET/LT to NT1 bit11: error second alarm,in direction NT1 to ET/LT bit12: sequential severe error second alarm,in direction ET/LT to NT1 bit13: sequential severe error second alarm,in direction NT1 to ET/LT bit14: degrade minute alarm,in direction ET/LT to NT1 bit15: degrade minute alarm,in direction NT1 to ET/LT Bits: 'bit12': 12, 'bit10': 10, 'bit11': 11, 'bit14': 14, 'bit13': 13, 'bit15': 15, 'bit9': 9, 'bit8': 8, 'bit7': 7, 'bit6': 6, 'bit5': 5, 'bit4': 4, 'bit3': 3, 'bit2': 2, 'bit1': 1, 'bit0': 0.
                 hwEntVe1PortAdminOper 1.3.6.1.4.1.2011.5.25.252.6.1.5 integer read-write
Indicates operation type of the ve1 port. Options: remoteLoop(1) localLoop(2) cancelLoop(3) Enumeration: 'localLoop': 2, 'cancelLoop': 3, 'remoteLoop': 1.
         hwEntVe1PortL1AlarmThresholdTable 1.3.6.1.4.1.2011.5.25.252.7 no-access
degrade alarm threshold config table of ve1 port.
             hwEntVe1PortL1AlarmThresholdEntry 1.3.6.1.4.1.2011.5.25.252.7.1 no-access
degrade alarm threshold config entry of ve1 port.
                 hwEntVe1PortL1AlarmThresholdIndex 1.3.6.1.4.1.2011.5.25.252.7.1.1 integer32 no-access
Indicates the Ve1PortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntVe1PortDmAlarmThreshold 1.3.6.1.4.1.2011.5.25.252.7.1.2 integer32 read-write
Indicates the degrade minute alarm threshold. Default: 8
                 hwEntVe1PortEsAlarmThreshold 1.3.6.1.4.1.2011.5.25.252.7.1.3 integer32 read-write
Indicates the error second alarm threshold. Default: 432
                 hwEntVe1PortCsesAlarmThreshold 1.3.6.1.4.1.2011.5.25.252.7.1.4 integer32 read-write
Indicates the sequential severe error second alarm threshold. Default: 4
         hwEntFxoPortConfigTable 1.3.6.1.4.1.2011.5.25.252.8 no-access
Indicates the attribute configuration table of fxo ports.
             hwEntFxoPortConfigEntry 1.3.6.1.4.1.2011.5.25.252.8.1 no-access
Indicates the attribute configuration entry of fxo ports.
                 hwEntFxoPortIndex 1.3.6.1.4.1.2011.5.25.252.8.1.1 integer32 no-access
Indicates the slot/subcard/port index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntFxoPortSendGain 1.3.6.1.4.1.2011.5.25.252.8.1.2 integer32 read-write
Indicates send gain of the fxo port. 0: 13.5dB, 1: 13.0dB, 2: 12.5dB 3: 12.0dB, 4: 11.5dB, 5: 11.0dB 6: 10.5dB, 7: 10.0dB, 8: 9.5dB 9: 9.0dB, 10: 8.5dB, 11: 8.0dB 12: 7.5dB, 13: 7.0dB, 14: 6.5dB 15: 6.0dB, 16: 5.5dB, 17: 5.0dB 18: 4.5dB, 19: 4.0dB, 20: 3.5dB 21: 3.0dB, 22: 2.5dB, 23: 2.0dB 24: 1.5dB, 25: 1.0dB, 26: 0.5dB 27: 0dB, 28: -0.5dB, 29: -1.0dB 30: -1.5dB, 31: -2.0dB, 32: -2.5dB 33: -3.0dB, 34: -3.5dB, 35: -4.0dB 36: -4.5dB, 37: -5.0dB, 38: -5.5dB 39: -6.0dB, 40: -6.5dB, 41: -7.0dB 42: -7.5dB, 43: -8.0dB, 44: -8.5dB 45: -9.0dB, 46: -9.5dB, 47: -10.0dB 48: -10.5dB, 49: -11.0dB, 50: -11.5dB 51: -12.0dB, 52: -12.5dB, 53: -13.0dB 54: -13.5dB, 55: -14.0dB, 56: -14.5dB 57: -15.0dB, 58: -15.5dB, 59: -16.0dB 60: -16.5dB Default: 27
                 hwEntFxoPortRecvGain 1.3.6.1.4.1.2011.5.25.252.8.1.3 integer32 read-write
Indicates receive gain of the fxo port. 0: 13.5dB, 1: 13.0dB, 2: 12.5dB 3: 12.0dB, 4: 11.5dB, 5: 11.0dB 6: 10.5dB, 7: 10.0dB, 8: 9.5dB 9: 9.0dB, 10: 8.5dB, 11: 8.0dB 12: 7.5dB, 13: 7.0dB, 14: 6.5dB 15: 6.0dB, 16: 5.5dB, 17: 5.0dB 18: 4.5dB, 19: 4.0dB, 20: 3.5dB 21: 3.0dB, 22: 2.5dB, 23: 2.0dB 24: 1.5dB, 25: 1.0dB, 26: 0.5dB 27: 0dB, 28: -0.5dB, 29: -1.0dB 30: -1.5dB, 31: -2.0dB, 32: -2.5dB 33: -3.0dB, 34: -3.5dB, 35: -4.0dB 36: -4.5dB, 37: -5.0dB, 38: -5.5dB 39: -6.0dB, 40: -6.5dB, 41: -7.0dB 42: -7.5dB, 43: -8.0dB, 44: -8.5dB 45: -9.0dB, 46: -9.5dB, 47: -10.0dB 48: -10.5dB, 49: -11.0dB, 50: -11.5dB 51: -12.0dB, 52: -12.5dB, 53: -13.0dB 54: -13.5dB, 55: -14.0dB, 56: -14.5dB 57: -15.0dB, 58: -15.5dB, 59: -16.0dB 60: -16.5dB Default: 34
                 hwEntFxoPortDcImpedance 1.3.6.1.4.1.2011.5.25.252.8.1.4 integer32 read-write
Indicates DC impedance of the fxo port. 0: 50 1: 800 Default: 0 Unit:
                 hwEntFxoPortAcImpedance 1.3.6.1.4.1.2011.5.25.252.8.1.5 integer32 read-write
Indicates AC impedance of the fxo port. 0: 600 1: 900 2: 270 + (750 || 150 nF) and 275 + (780 || 150 nF) 3: 220 + (820 || 120 nF) and 220 + (820 || 115 nF) 4: 370 + (620 || 310 nF) 5: 320 + (1050 || 230 nF) 6: 370 + (820 || 110 nF) 7: 275 + (780 || 115 nF) 8: 20 + (820 || 110 nF) 9: 350 + (1000 || 210 nF) 10: 200 + (680 || 100 nF) 11: 600 + 2.16 F 12: 900 + 1 F 13: 900 + 2.16 F 14: 600 + 1 F 15: Global impedance Default: 0 Unit:
                 hwEntFxoPortRingMinDuration 1.3.6.1.4.1.2011.5.25.252.8.1.6 integer32 read-write
Indicates the min of the ring duration time. 0: 100ms 1: 150ms 2: 200ms 3: 256ms 4: 384ms 5: 512ms 6: 640ms 7: 1024ms Default: 2
                 hwEntFxoPortRingMaxInterval 1.3.6.1.4.1.2011.5.25.252.8.1.7 integer32 read-write
Indicates the max of the ring interval time. 0: not use, 1: 128ms, 2: 256ms, 3: 284ms 4: 512ms, 5: 640ms, 6: 768ms, 7: 896ms 8: 1024ms, 9: 1152ms, 10: 1280ms, 11: 1408ms 12: 1536ms, 13: 1664ms, 14: 1792ms, 15: 1920ms 16: 2000ms, 17: 2500ms, 18: 3000ms, 19: 3500ms 20: 4000ms, 21: 4500ms, 22: 5000ms, 23: 6000ms 24: 7000ms, 25: 8000ms, 26: 9000ms, 27: 10000ms 28: 15000ms Default: 0
                 hwEntFxoPortRingFrequency 1.3.6.1.4.1.2011.5.25.252.8.1.8 integer32 read-write
Indicates the ring frequency. 0: 16Hz 1: 25Hz 2: 50Hz Default: 1
                 hwEntFxoPortRingAcAmplitude 1.3.6.1.4.1.2011.5.25.252.8.1.9 integer32 read-write
Indicates the ring of the AC amplitude. 0: 74V 1: 65V 2: 50V Default: 2
                 hwEntFxoPortRingOffset 1.3.6.1.4.1.2011.5.25.252.8.1.10 integer32 read-write
Indicates the ring offset. 0-100: -50V ~ 50V Default: 70
                 hwEntFxoPortFeedMaxVoltage 1.3.6.1.4.1.2011.5.25.252.8.1.11 integer32 read-write
Indicates the max feed voltage. Default: -20 Unit:V
                 hwEntFxoPortFeedMinVoltage 1.3.6.1.4.1.2011.5.25.252.8.1.12 integer32 read-write
Indicates the min feed voltage. Default: -80 Unit:V
                 hwEntFxoPortFeedMaxCurrent 1.3.6.1.4.1.2011.5.25.252.8.1.13 integer32 read-write
Indicates the max feed current. 0: 25mA 1: 30mA 2: 35mA 3: 40mA Default: 2
                 hwEntFxoPortFeedMinCurrent 1.3.6.1.4.1.2011.5.25.252.8.1.14 integer32 read-write
Indicates the min of the PTP feed current. 0: 16mA 1: 17mA 2: 18mA 3: 19mA 4: 20mA Default: 0
         hwEntFxoPortOperTable 1.3.6.1.4.1.2011.5.25.252.9 no-access
Indicates the operation table (management, maintenance, and status query) of the fxo ports.
             hwEntFxoPortOperEntry 1.3.6.1.4.1.2011.5.25.252.9.1 no-access
Indicates the operation entry (management, maintenance, and status query) of the fxo ports.
                 hwEntFxoPortOperIndex 1.3.6.1.4.1.2011.5.25.252.9.1.1 integer32 no-access
Indicates the FxsPortOper index. bits 31-24 (8 bits): reserved bits 23-16 (8 bits): slot index bits 15-8 (8 bits): subcard index bits 7-0 (8 bits): port index
                 hwEntFxoPortSrvState 1.3.6.1.4.1.2011.5.25.252.9.1.2 integer read-only
Indicates state of the fxo port. Options: normal(1) fault(2) deactive(3) powredeny(4) Enumeration: 'fault': 2, 'powredeny': 4, 'normal': 1, 'deactive': 3.
                 hwEntFxoPortAdminState 1.3.6.1.4.1.2011.5.25.252.9.1.3 integer read-only
Indicates the fxo port Admin state. Options: noLoopNoTest(1) noLoopTest(2) localLoopNoTest(3) localLoopTest(4) remoteLoopNoTest(5) remoteLoopTest(6) Enumeration: 'noLoopNoTest': 1, 'remoteLoopNoTest': 5, 'localLoopTest': 4, 'remoteLoopTest': 6, 'localLoopNoTest': 3, 'noLoopTest': 2.
                 hwEntFxoPortLineState 1.3.6.1.4.1.2011.5.25.252.9.1.4 integer read-only
Indicates line state of the fxo port. Options: normal(1) fault(2) unknown(3) Enumeration: 'fault': 2, 'normal': 1, 'unknown': 3.
                 hwEntFxoPortAdminOper 1.3.6.1.4.1.2011.5.25.252.9.1.5 integer read-write
Indicates the operate type. Options: remoteLoop(1) localLoop(2) cancelLoop(3) Enumeration: 'localLoop': 2, 'cancelLoop': 3, 'remoteLoop': 1.
         hwEntVoicePortConformance 1.3.6.1.4.1.2011.5.25.252.10
               hwEntVoicePortCompliances 1.3.6.1.4.1.2011.5.25.252.10.1
                   hwEntVoicePortCompliance 1.3.6.1.4.1.2011.5.25.252.10.1.1
The compliance statement for systems supporting the this module.
               hwEntVoicePortGroups 1.3.6.1.4.1.2011.5.25.252.10.2
                   hwEntFxsPortConfigGroup 1.3.6.1.4.1.2011.5.25.252.10.2.1
The hwEntFxsPortConfig group.
                   hwEntFxsPortOperGroup 1.3.6.1.4.1.2011.5.25.252.10.2.2
The hwEntFxsPortOper group.
                   hwEntBraPortConfigGroup 1.3.6.1.4.1.2011.5.25.252.10.2.3
The HwEntBraPortConfig group.
                   hwEntBraPortOperGroup 1.3.6.1.4.1.2011.5.25.252.10.2.4
The HwEntBraPortOper group.
                   hwEntVe1PortConfigGroup 1.3.6.1.4.1.2011.5.25.252.10.2.5
The HwEntVe1PortConfig group.
                   hwEntVe1PortOperGroup 1.3.6.1.4.1.2011.5.25.252.10.2.6
The HwEntVe1PortOper group.
                   hwEntVe1PortL1AlarmThresholdGroup 1.3.6.1.4.1.2011.5.25.252.10.2.7
The HwEntVe1PortL1AlarmThreshold group.
                   hwEntFxoPortConfigGroup 1.3.6.1.4.1.2011.5.25.252.10.2.8
The HwEntFxoPortConfig group.
                   hwEntFxoPortOperGroup 1.3.6.1.4.1.2011.5.25.252.10.2.9
The HwEntFxoPortOper group.