HUAWEI-CLOCK-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
Home | MIB: HUAWEI-CLOCK-MIB | |||
---|---|---|---|---|
Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
Object Name | OID | Type | Access | Info |
hwClockMIB | 1.3.6.1.4.1.2011.5.25.186 |
The MIB contains objects of module clock management and 1588 interface. |
||
hwClockManageObjects | 1.3.6.1.4.1.2011.5.25.186.1 | |||
hwClockGlobalObjects | 1.3.6.1.4.1.2011.5.25.186.1.1 | |||
hwClockSourceEthClkEnable | 1.3.6.1.4.1.2011.5.25.186.1.1.1 | enabledstatus | read-write |
The flag indicates that the ethernet clock is globally enabled. |
hwClockSourceSsmUnknown | 1.3.6.1.4.1.2011.5.25.186.1.1.2 | integer | read-write |
The quality level of unknown SSM. Enumeration: 'dn': 15, 'sec': 11, 'ssua': 4, 'prc': 2, 'ssub': 8. |
hwClockSourceSysClkWorkMode | 1.3.6.1.4.1.2011.5.25.186.1.1.3 | integer | read-only |
The work mode of system clock. Enumeration: 'hold': 2, 'freeoscillate': 3, 'trace': 1. |
hwClockSourceForceCloseEnableStatus | 1.3.6.1.4.1.2011.5.25.186.1.1.4 | enabledstatus | read-write |
The enable status of export forced close. |
hwClockSourceSsmControl | 1.3.6.1.4.1.2011.5.25.186.1.1.5 | integer | read-write |
The flag whether SSM is concerned with the clock source selection. Enumeration: 'on': 1, 'off': 2, 'extend': 3. |
hwClockSourceHoldMode | 1.3.6.1.4.1.2011.5.25.186.1.1.6 | integer | read-only |
The hold mode of clock source. Enumeration: 'holdForever': 2, 'hold24Hours': 1. |
hwClockSourceFreqCheckEnable | 1.3.6.1.4.1.2011.5.25.186.1.1.7 | enabledstatus | read-write |
The enable flag of frequency check. |
hwClockSourceFreqCheckLeftRange | 1.3.6.1.4.1.2011.5.25.186.1.1.8 | integer32 | read-write |
The left range of frequency check, unit in 0.01ppm. |
hwClockSourceFreqCheckRightRange | 1.3.6.1.4.1.2011.5.25.186.1.1.9 | integer32 | read-write |
The right range of frequency check, unit in 0.01ppm. |
hwClockSourceRetrieveMode | 1.3.6.1.4.1.2011.5.25.186.1.1.10 | integer | read-write |
The retrieve mode of clock source. Enumeration: 'retrieve': 1, 'noRetrieve': 2. |
hwClockTimeUsedSource | 1.3.6.1.4.1.2011.5.25.186.1.1.11 | integer | read-write |
The clock time used source. Enumeration: 'src1ppsTodBit0': 3, 'src1ppsTodBit1': 4, 'srcDclsTimeBit1': 2, 'srcDclsTimeBit0': 1, 'srcFreeRun': 6, 'srcPtp': 5. |
hwClockExtTimeInputType | 1.3.6.1.4.1.2011.5.25.186.1.1.12 | integer | read-write |
The input time type of clock extern time. Enumeration: 'type1ppsTodRs232': 2, 'type1ppsTodGps': 3, 'typeNone': 4, 'typeDclsTime': 1. |
hwClockExtTimeOutputType | 1.3.6.1.4.1.2011.5.25.186.1.1.13 | integer | read-write |
The output time type of clock extern time. Enumeration: 'type1ppsTodRs232': 2, 'type1ppsTodGps': 3, 'typeNone': 4, 'typeDclsTime': 1. |
hwClockAlarmThresholdFrequencyOffset | 1.3.6.1.4.1.2011.5.25.186.1.1.14 | integer32 | read-write |
The Threshold of clock alarm. |
hwClockFrequencyOffsetMax | 1.3.6.1.4.1.2011.5.25.186.1.1.15 | integer32 | read-only |
The max offset of clock frequency. |
hwClockFrequencyOffsetMin | 1.3.6.1.4.1.2011.5.25.186.1.1.16 | integer32 | read-only |
The min offset of clock frequency. |
hwClockFrequencyOffsetMean | 1.3.6.1.4.1.2011.5.25.186.1.1.17 | integer32 | read-only |
The mean offset of clock frequency. |
hwClockFrequencyOffset | 1.3.6.1.4.1.2011.5.25.186.1.1.18 | integer32 | read-only |
The current offset of clock frequency. |
hwClockSourceSelTable | 1.3.6.1.4.1.2011.5.25.186.1.2 | no-access |
The system clock source selection table. |
|
1.3.6.1.4.1.2011.5.25.186.1.2.1 | no-access |
The entry of system clock source selection table. |
||
hwClockSourceSelChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.2.1.1 | physicalindex | no-access |
The chassis index. |
hwClockSourceSelType | 1.3.6.1.4.1.2011.5.25.186.1.2.1.2 | integer32 | no-access |
The select type. |
hwClockSourceSelMode | 1.3.6.1.4.1.2011.5.25.186.1.2.1.3 | integer | read-only |
The mode of clock source selection. Enumeration: 'auto': 1, 'force': 3, 'manual': 2. |
hwClockSourceSelSourceId | 1.3.6.1.4.1.2011.5.25.186.1.2.1.4 | integer32 | read-only |
The source ID of the clock traced. |
hwClockSourceCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.3 | no-access |
The clock source config table. |
|
1.3.6.1.4.1.2011.5.25.186.1.3.1 | no-access |
The entry of clock source config table. |
||
hwClockCfgChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.3.1.1 | physicalindex | no-access |
The index of the chassis whitch the clock source belongs to. |
hwClockCfgSourceIndex | 1.3.6.1.4.1.2011.5.25.186.1.3.1.2 | integer32 | no-access |
The clock source index. |
hwClockCfgSourceId | 1.3.6.1.4.1.2011.5.25.186.1.3.1.3 | integer32 | read-only |
The clock source ID. |
hwClockCfgSourceDescr | 1.3.6.1.4.1.2011.5.25.186.1.3.1.4 | octet string | read-only |
The clock source description. |
hwClockCfgWtrTime | 1.3.6.1.4.1.2011.5.25.186.1.3.1.5 | integer32 | read-write |
The waiting for restore time of clock source. |
hwClockCfgBadDetect | 1.3.6.1.4.1.2011.5.25.186.1.3.1.6 | enabledstatus | read-write |
The enable status of clock source bad detecting. |
hwClockCfgSystemPriority | 1.3.6.1.4.1.2011.5.25.186.1.3.1.7 | integer32 | read-write |
The priority of system clock source. |
hwClockCfgBits0Priority | 1.3.6.1.4.1.2011.5.25.186.1.3.1.8 | integer32 | read-write |
The priority of BITS0 clock source. |
hwClockCfgBits1Priority | 1.3.6.1.4.1.2011.5.25.186.1.3.1.9 | integer32 | read-write |
The priority of BITS1 clock source. |
hwClockCfgSystemLockOut | 1.3.6.1.4.1.2011.5.25.186.1.3.1.10 | integer32 | read-write |
The lock out of system clock source. |
hwClockCfgBits0LockOut | 1.3.6.1.4.1.2011.5.25.186.1.3.1.11 | integer32 | read-write |
The lock out of BITS0 clock source. |
hwClockCfgBits1LockOut | 1.3.6.1.4.1.2011.5.25.186.1.3.1.12 | integer32 | read-write |
The lock out of BITS1 clock source. |
hwClockCfgSourceSsm | 1.3.6.1.4.1.2011.5.25.186.1.3.1.13 | integer | read-write |
The SSM quality of clock source. Enumeration: 'ssmSsut': 2, 'ssmUnknown': 6, 'ssmSec': 4, 'ssmDn': 5, 'ssmSsul': 3, 'ssmPrc': 1. |
hwClockCfgSourceSsmSetMode | 1.3.6.1.4.1.2011.5.25.186.1.3.1.14 | integer | read-write |
The set mode of SSM. Enumeration: 'auto': 2, 'manual': 1. |
hwClockCfgExportEnableStatus | 1.3.6.1.4.1.2011.5.25.186.1.3.1.15 | enabledstatus | read-write |
The enable status of clock source export. |
hwClockCfgSwiEnableStatus | 1.3.6.1.4.1.2011.5.25.186.1.3.1.16 | enabledstatus | read-write |
he enable status of clock source switch. |
hwClockCfgSourceState | 1.3.6.1.4.1.2011.5.25.186.1.3.1.17 | integer | read-write |
The state of clock source. Enumeration: 'abnormal': 2, 'normal': 1. |
hwClockCfgSsmThreshold | 1.3.6.1.4.1.2011.5.25.186.1.3.1.18 | integer | read-write |
The SSM quality level threshold of clock source. Enumeration: 'qlPrc': 5, 'qlSec': 2, 'qlSsua': 4, 'qlSsub': 3, 'qlDn': 1. |
hwClockCfgSourceS1Id | 1.3.6.1.4.1.2011.5.25.186.1.3.1.19 | integer32 | read-only |
The S1 byte of the clock. |
hwClockCfgFreqCheckResult | 1.3.6.1.4.1.2011.5.25.186.1.3.1.20 | integer32 | read-write |
The result of frequency check, unit in 0.01ppm. |
hwClockCfgHoldOffTime | 1.3.6.1.4.1.2011.5.25.186.1.3.1.21 | integer32 | read-write |
The hold off time of clock, unit in 100ms. |
hwClockCfgPriRvtEnableStatus | 1.3.6.1.4.1.2011.5.25.186.1.3.1.22 | enabledstatus | read-write |
The enable status of switch according priority. |
hwClockCfgSwitchCondition | 1.3.6.1.4.1.2011.5.25.186.1.3.1.23 | integer | read-write |
The condition of clock switch. Enumeration: 'switch': 2, 'noSwitch': 1. |
hwClockCfgClkSourceType | 1.3.6.1.4.1.2011.5.25.186.1.3.1.24 | integer | read-only |
The type of clock source. Enumeration: 'line': 2, 'bits': 1, 'inner': 3, 'system': 4. |
hwClockBitsCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.4 | no-access |
The clock bits congfig table. |
|
1.3.6.1.4.1.2011.5.25.186.1.4.1 | no-access |
The entry of clock bits congfig table. |
||
hwClockBitsCfgChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.4.1.1 | physicalindex | no-access |
The index of the chassis whitch the clock source belongs to. |
hwClockBitsCfgBitsIndex | 1.3.6.1.4.1.2011.5.25.186.1.4.1.2 | integer32 | no-access |
The index of BITS clock. |
hwClockBitsCfgName | 1.3.6.1.4.1.2011.5.25.186.1.4.1.3 | octet string | read-only |
The name of clock. |
hwClockBitsCfgBitsPortType | 1.3.6.1.4.1.2011.5.25.186.1.4.1.4 | integer | read-only |
The BITS port type. Enumeration: 'portRj45': 1, 'portSMB': 2. |
hwClockBitsCfgBitsType | 1.3.6.1.4.1.2011.5.25.186.1.4.1.5 | integer | read-write |
The BITS type. Enumeration: 'none': 4, 'type1ppsTod': 3, 'typeDclsTime': 2, 'type2Mbps': 0, 'type1544Mbps': 5, 'type2Mhz': 1. |
hwClockBitsCfgDirection | 1.3.6.1.4.1.2011.5.25.186.1.4.1.6 | integer | read-write |
The direction of BITS. Enumeration: 'none': 4, 'out': 2, 'inAndOut': 3, 'in': 1. |
hwClockBitsCfgRecvSaBit | 1.3.6.1.4.1.2011.5.25.186.1.4.1.7 | integer | read-write |
The received SA bit. Enumeration: 'sa8': 8, 'sa7': 7, 'sa6': 6, 'sa5': 5, 'sa4': 4. |
hwClockBitsCfgSendSaBit | 1.3.6.1.4.1.2011.5.25.186.1.4.1.8 | integer | read-write |
The sent SA bit. Enumeration: 'sa8': 8, 'sa7': 7, 'sa6': 6, 'sa5': 5, 'sa4': 4. |
hwClockBitsCfgForceOutS1 | 1.3.6.1.4.1.2011.5.25.186.1.4.1.9 | integer | read-write |
The S1 byte of forcing out. Enumeration: 'ssua': 4, 'prc': 2, 'ssub': 8, 'dn': 15, 'sec': 11, 'unk': 0. |
hwClockBitsCfgSaBit | 1.3.6.1.4.1.2011.5.25.186.1.4.1.10 | integer | read-write |
The SA bit of SSM information. Enumeration: 'sa8': 8, 'sa7': 7, 'sa6': 6, 'sa5': 5, 'sa4': 4. |
hwClockBitsCfgInputMode | 1.3.6.1.4.1.2011.5.25.186.1.4.1.11 | integer | read-write |
The input mode of clock source. Enumeration: 'clk2MBits': 0, 'dclsTime': 2, 'clk2MHz': 1. |
hwClockBitsCfgOutputMode | 1.3.6.1.4.1.2011.5.25.186.1.4.1.12 | integer | read-write |
The output mode of clock source. Enumeration: 'clk2MBits': 0, 'dclsTime': 2, 'clk2MHz': 1. |
hwClockBitsCfgInvalidCond | 1.3.6.1.4.1.2011.5.25.186.1.4.1.13 | integer | read-write |
The invalid condition of clock source. Enumeration: 'lof': 3, 'ais': 2, 'no': 1. |
hwClockBitsCfgSourceId | 1.3.6.1.4.1.2011.5.25.186.1.4.1.14 | integer32 | read-only |
The clock source ID. |
hwClockBitsCfgTodSignal | 1.3.6.1.4.1.2011.5.25.186.1.4.1.15 | integer | read-write |
The tod signal of clock source. Enumeration: 'none': 3, 'ubx': 2, 'nmea': 1. |
hwClockBitsCfgFrameFormat | 1.3.6.1.4.1.2011.5.25.186.1.4.1.16 | integer | read-write |
Encoding type and frame check format of the extern clock port. Enumeration: 'pcm30crc': 2, 'none': 0, 'pcm30nocrc': 1, 'pcm31crc': 4, 'pcm31nocrc': 3. |
hwClockPortCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.5 | no-access |
The clock port config table. |
|
1.3.6.1.4.1.2011.5.25.186.1.5.1 | no-access |
The entry of clock port config table. |
||
hwClockPortCfgIfIndex | 1.3.6.1.4.1.2011.5.25.186.1.5.1.1 | interfaceindex | no-access |
The interface index. |
hwClockPortCfgLeftFramePri | 1.3.6.1.4.1.2011.5.25.186.1.5.1.2 | integer32 | read-write |
The clock priority of left frame. |
hwClockPortCfgRightFramePri | 1.3.6.1.4.1.2011.5.25.186.1.5.1.3 | integer32 | read-write |
The clock priority of right frame. |
hwClockPortCfgForceOutS1 | 1.3.6.1.4.1.2011.5.25.186.1.5.1.4 | integer32 | read-write |
The S1 byte of forcing out. |
hwClockLineClkCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.6 | no-access |
The line clock config table. |
|
1.3.6.1.4.1.2011.5.25.186.1.6.1 | no-access |
The entry of line clock config table. |
||
hwClockLineClkCfgChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.6.1.1 | physicalindex | no-access |
The chassis index. |
hwClockLineClkCfgSlotIndex | 1.3.6.1.4.1.2011.5.25.186.1.6.1.2 | integer32 | no-access |
The slot index of the line clock. |
hwClockLineClkCfgCardId | 1.3.6.1.4.1.2011.5.25.186.1.6.1.3 | integer32 | read-only |
The card index witch is seleced to provide line clock. |
hwClockLineClkCfgPortId | 1.3.6.1.4.1.2011.5.25.186.1.6.1.4 | integer32 | read-only |
The port index witch is seleced to provide line clock. |
hwClockLineClkCfgRecvS1 | 1.3.6.1.4.1.2011.5.25.186.1.6.1.5 | integer32 | read-only |
The S1 byte value received. |
hwClockLineClkCfgSendS1 | 1.3.6.1.4.1.2011.5.25.186.1.6.1.6 | integer32 | read-only |
The S1 byte value sent. |
hwClockLineCfgSoureId | 1.3.6.1.4.1.2011.5.25.186.1.6.1.7 | integer32 | read-only |
Description. |
hwClockTrapOid | 1.3.6.1.4.1.2011.5.25.186.1.7 | |||
hwClockLastSourceName | 1.3.6.1.4.1.2011.5.25.186.1.7.1 | octet string | no-access |
The last clock source name. |
hwClockCurSourceName | 1.3.6.1.4.1.2011.5.25.186.1.7.2 | octet string | no-access |
The current clock source name. |
hwClockSourceOldLockMode | 1.3.6.1.4.1.2011.5.25.186.1.7.3 | integer | no-access |
The old lock mode of clock source. Enumeration: 'hold': 3, 'lock': 2, 'freeRunJudge': 16, 'freeRun': 0, 'fastLock': 1, 'holdJudge': 19. |
hwClockChassisId | 1.3.6.1.4.1.2011.5.25.186.1.7.4 | integer32 | no-access |
The chassis ID. |
hwClockOldSourceState | 1.3.6.1.4.1.2011.5.25.186.1.7.5 | integer | no-access |
The old state of clock source. Enumeration: 'holdoff': 4, 'wtr': 3, 'initial': 0, 'abnormal': 2, 'normal': 1. |
hwClockPllId | 1.3.6.1.4.1.2011.5.25.186.1.7.6 | integer | no-access |
The id of pll. Enumeration: 'sync2M1': 2, 'system': 1, 'sync2M2': 3. |
hwClockAttributeOutValue | 1.3.6.1.4.1.2011.5.25.186.1.7.7 | integer | no-access |
The current output value. Enumeration: 'ssua': 4, 'prc': 2, 'ssub': 8, 'dn': 15, 'sec': 11, 'unk': 0. |
hwClockCesAcrSlot | 1.3.6.1.4.1.2011.5.25.186.1.7.8 | integer32 | no-access |
The slot ID of CES ACR clock source. |
hwClockCesAcrCard | 1.3.6.1.4.1.2011.5.25.186.1.7.9 | integer32 | no-access |
The card ID of CES ACR clock source. |
hwClockCesAcrDomain | 1.3.6.1.4.1.2011.5.25.186.1.7.10 | integer32 | no-access |
The recovery domain value of CES ACR clock source. |
hwClockCesAcrOldMasterPwName | 1.3.6.1.4.1.2011.5.25.186.1.7.11 | octet string | no-access |
The master pw SerialPort name of CES ACR old clock source. |
hwClockCesAcrNewMasterPwName | 1.3.6.1.4.1.2011.5.25.186.1.7.12 | octet string | no-access |
The master pw SerialPort name of CES ACR new clock source. |
hwClockCesAcrLockState | 1.3.6.1.4.1.2011.5.25.186.1.7.13 | integer32 | no-access |
The lock state of the CES ACR. |
hwClockCesDcrSlot | 1.3.6.1.4.1.2011.5.25.186.1.7.14 | integer32 | no-access |
The slot ID of CES DCR clock source. |
hwClockCesDcrCard | 1.3.6.1.4.1.2011.5.25.186.1.7.15 | integer32 | no-access |
The card ID of CES DCR clock source. |
hwClockCesDcrDomain | 1.3.6.1.4.1.2011.5.25.186.1.7.16 | integer32 | no-access |
The recovery domain value of CES DCR clock source. |
hwClockCesDcrOldMasterPwName | 1.3.6.1.4.1.2011.5.25.186.1.7.17 | octet string | no-access |
The master pw SerialPort name of CES DCR old clock source. |
hwClockCesDcrNewMasterPwName | 1.3.6.1.4.1.2011.5.25.186.1.7.18 | octet string | no-access |
The master pw SerialPort name of CES DCR new clock source. |
hwClockCesDcrLockState | 1.3.6.1.4.1.2011.5.25.186.1.7.19 | integer32 | no-access |
The lock state of the CES DCR. |
hwClockNotifications | 1.3.6.1.4.1.2011.5.25.186.1.8 | |||
hwClockSourceSwitch | 1.3.6.1.4.1.2011.5.25.186.1.8.1 |
Clock source switch notification. |
||
hwClockSourceSysClkLockModeChange | 1.3.6.1.4.1.2011.5.25.186.1.8.2 |
The lock mode of system clock source change notification. |
||
hwClockSourceStateChange | 1.3.6.1.4.1.2011.5.25.186.1.8.3 |
The state of clock source change notification. |
||
hwClockSourceStateResume | 1.3.6.1.4.1.2011.5.25.186.1.8.4 |
The state of clock source resume notification. |
||
hwClockSourceFreqCheck | 1.3.6.1.4.1.2011.5.25.186.1.8.5 |
The result of clock source frequnce check abnormal notification. |
||
hwClockSourceOutputBelowThreshold | 1.3.6.1.4.1.2011.5.25.186.1.8.6 |
The SSM of output below threshold notification. |
||
hwClockNotInLockedMode | 1.3.6.1.4.1.2011.5.25.186.1.8.7 |
The work mode of system clock is not in locked mode. |
||
hwClockInLockedMode | 1.3.6.1.4.1.2011.5.25.186.1.8.8 |
The work mode of system clock is in locked mode. |
||
hwClockSourceFailed | 1.3.6.1.4.1.2011.5.25.186.1.8.11 |
The state of clock source is failed. |
||
hwClockSourceValid | 1.3.6.1.4.1.2011.5.25.186.1.8.12 |
The state of clock source is valid. |
||
hwClockSourceFreqCheckResume | 1.3.6.1.4.1.2011.5.25.186.1.8.13 |
The result of clock source frequnce check normal notification. |
||
hwClockSourceOutputBelowThresholdResume | 1.3.6.1.4.1.2011.5.25.186.1.8.14 |
The SSM of output above threshold notification. |
||
hwClockCesAcrMasterPwChange | 1.3.6.1.4.1.2011.5.25.186.1.8.15 |
CES ACR master PW status change. |
||
hwClockCesAcrLockFail | 1.3.6.1.4.1.2011.5.25.186.1.8.16 |
CES ACR clock source lock fail. |
||
hwClockCesAcrLockFailResume | 1.3.6.1.4.1.2011.5.25.186.1.8.17 |
CES ACR clock source lock fail resume. |
||
hwClockClusterTopoFail | 1.3.6.1.4.1.2011.5.25.186.1.8.22 |
Clock cluster inter-chassis synchronization topo compute failed. |
||
hwClockClusterTopoFailResume | 1.3.6.1.4.1.2011.5.25.186.1.8.23 |
Clock inter-chassis synchronization topo compute successfully. |
||
hwClockSourceInputBelowThreshold | 1.3.6.1.4.1.2011.5.25.186.1.8.24 |
The SSM of input below threshold notification. |
||
hwClockSourceInputBelowThresholdResume | 1.3.6.1.4.1.2011.5.25.186.1.8.25 |
The SSM of input above or equal threshold notification. |
||
hwClockSsmPktLos | 1.3.6.1.4.1.2011.5.25.186.1.8.26 |
The ssm packet of clock source is lost. |
||
hwClockSsmPktLosResume | 1.3.6.1.4.1.2011.5.25.186.1.8.27 |
The ssm packet of clock source is normal. |
||
hwClockCesDcrMasterPwChange | 1.3.6.1.4.1.2011.5.25.186.1.8.28 |
CES DCR master PW status change. |
||
hwClockCesDcrLockFail | 1.3.6.1.4.1.2011.5.25.186.1.8.29 |
CES DCR clock source lock fail. |
||
hwClockCesDcrLockFailResume | 1.3.6.1.4.1.2011.5.25.186.1.8.30 |
CES DCR clock source lock fail resume. |
||
hwClockAttributeTable | 1.3.6.1.4.1.2011.5.25.186.1.9 | no-access |
The clock Attribute table. |
|
1.3.6.1.4.1.2011.5.25.186.1.9.1 | no-access |
The entry of clock Attribute table. |
||
hwClockAttributeChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.9.1.1 | physicalindex | no-access |
The chassis index. |
hwClockAttributeSysClkRunMode | 1.3.6.1.4.1.2011.5.25.186.1.9.1.2 | integer | read-write |
The run mode of system clock. Enumeration: 'freeRun': 1, 'hold': 2, 'normal': 0. |
hwClockAttributeSsmControl | 1.3.6.1.4.1.2011.5.25.186.1.9.1.3 | integer | read-write |
The flag whether SSM is concerned with the clock source selection. Enumeration: 'on': 0, 'off': 1. |
hwClockAttributeFreqCheckEnable | 1.3.6.1.4.1.2011.5.25.186.1.9.1.4 | enabledstatus | read-write |
The enable flag of frequency check. |
hwClockAttributeRetrieveMode | 1.3.6.1.4.1.2011.5.25.186.1.9.1.5 | integer | read-write |
The retrieve mode of system clock. Enumeration: 'retrieve': 0, 'noRetrieve': 1. |
hwClockAttributeWtrTime | 1.3.6.1.4.1.2011.5.25.186.1.9.1.6 | integer32 | read-write |
The time waiting for retrieve. |
hwClockAttributeHoldOffTime | 1.3.6.1.4.1.2011.5.25.186.1.9.1.7 | integer32 | read-write |
The holdoff-time when the system source is lost. |
hwClockAttributeOutThreshold | 1.3.6.1.4.1.2011.5.25.186.1.9.1.8 | integer | read-write |
The Threshold of out put. Enumeration: 'dn': 15, 'sec': 11, 'ssua': 4, 'prc': 2, 'ssub': 8. |
hwClockAttributeSysMaxOutSsm | 1.3.6.1.4.1.2011.5.25.186.1.9.1.9 | integer | read-write |
The max ssm of system out put. Enumeration: 'sec': 11, 'unk': 0, 'ssua': 4, 'prc': 2, 'ssub': 8. |
hwClockAttribute2M1MaxOutSsm | 1.3.6.1.4.1.2011.5.25.186.1.9.1.10 | integer | read-write |
The max ssm of 2msync-1 out put. Enumeration: 'sec': 11, 'unk': 0, 'ssua': 4, 'prc': 2, 'ssub': 8. |
hwClockAttribute2M2MaxOutSsm | 1.3.6.1.4.1.2011.5.25.186.1.9.1.11 | integer | read-write |
The max ssm of 2msync-2 out put. Enumeration: 'sec': 11, 'unk': 0, 'ssua': 4, 'prc': 2, 'ssub': 8. |
hwClockAttributeSysClkLockMode | 1.3.6.1.4.1.2011.5.25.186.1.9.1.12 | integer | read-only |
The Lock mode of system clock. Enumeration: 'hold': 3, 'lock': 2, 'freeRunJudge': 16, 'freeRun': 0, 'fastLock': 1, 'holdJudge': 19. |
hwClockAttributeExtendSsmControl | 1.3.6.1.4.1.2011.5.25.186.1.9.1.13 | integer | read-write |
The flag whether Extend SSM is concerned with the clock source selection. Enumeration: 'on': 0, 'off': 1. |
hwClockAttributeInternalClockId | 1.3.6.1.4.1.2011.5.25.186.1.9.1.14 | integer32 | read-write |
The internal clockid of the device. |
hwClockAttributeTodProtocol | 1.3.6.1.4.1.2011.5.25.186.1.9.1.15 | integer | read-write |
1pps bits tod protocol. Enumeration: 'ccsa': 4, 'none': 3, 'ubx': 2, 'nmea': 1. |
hwClockAttributeLtiSquelch | 1.3.6.1.4.1.2011.5.25.186.1.9.1.16 | enabledstatus | read-write |
The frequency signal output squelch flag upon the frequency loss. |
hwClockAttributeInputThreshold | 1.3.6.1.4.1.2011.5.25.186.1.9.1.17 | integer | read-write |
The squelch threshold of the external input source. Enumeration: 'dn': 15, 'sec': 11, 'ssua': 4, 'prc': 2, 'ssub': 8. |
hwClockSrcSelTable | 1.3.6.1.4.1.2011.5.25.186.1.10 | no-access |
The system clock source selection table. |
|
1.3.6.1.4.1.2011.5.25.186.1.10.1 | no-access |
The entry of system clock source selection table. |
||
hwClockSrcSelChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.10.1.1 | physicalindex | no-access |
The chassis index. |
hwClockSrcSelType | 1.3.6.1.4.1.2011.5.25.186.1.10.1.2 | integer | no-access |
The PLL Id. Enumeration: 'sync2M1': 2, 'system': 1, 'sync2M2': 3. |
hwClockSrcSelMode | 1.3.6.1.4.1.2011.5.25.186.1.10.1.3 | integer | read-write |
The mode of clock source selection. Enumeration: 'auto': 0, 'force': 2, 'manual': 1. |
hwClockSrcSelSrcName | 1.3.6.1.4.1.2011.5.25.186.1.10.1.4 | octet string | read-write |
The name of clock source for selection. |
hwClockSrcTraceSrcName | 1.3.6.1.4.1.2011.5.25.186.1.10.1.5 | octet string | read-only |
The name of trace source. |
hwClockSrcCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.11 | no-access |
The clock source config table. |
|
1.3.6.1.4.1.2011.5.25.186.1.11.1 | no-access |
The entry of clock source config table. |
||
hwClockSrcCfgChassisIndex | 1.3.6.1.4.1.2011.5.25.186.1.11.1.1 | physicalindex | no-access |
The chassis index. |
hwClockSrcCfgSourceTypeIndex | 1.3.6.1.4.1.2011.5.25.186.1.11.1.2 | integer | no-access |
The type of clock source. Enumeration: 'interface': 3, 'bits': 1, 'ptp': 2. |
hwClockSrcCfgSourceIndex | 1.3.6.1.4.1.2011.5.25.186.1.11.1.3 | integer32 | no-access |
The index of clock source. |
hwClockSrcCfgSourceDescr | 1.3.6.1.4.1.2011.5.25.186.1.11.1.4 | octet string | read-only |
The description of clock source. |
hwClockSrcCfgClkEnable | 1.3.6.1.4.1.2011.5.25.186.1.11.1.5 | enabledstatus | read-only |
The enable flag of clock source. |
hwClockSrcCfgSystemPriority | 1.3.6.1.4.1.2011.5.25.186.1.11.1.6 | integer32 | read-only |
The priority of system clock source. |
hwClockSrcCfg2M1Priority | 1.3.6.1.4.1.2011.5.25.186.1.11.1.7 | integer32 | read-only |
The priority of 2msync-1 clock source. |
hwClockSrcCfg2M2Priority | 1.3.6.1.4.1.2011.5.25.186.1.11.1.8 | integer32 | read-only |
The priority of 2msync-2 clock source. |
hwClockSrcCfgSourceSsm | 1.3.6.1.4.1.2011.5.25.186.1.11.1.9 | integer | read-only |
The SSM quality of clock source. Enumeration: 'ssua': 4, 'prc': 2, 'ssub': 8, 'unknown': 16, 'dn': 15, 'sec': 11, 'unk': 0. |
hwClockSrcCfgSsmSetMode | 1.3.6.1.4.1.2011.5.25.186.1.11.1.10 | integer | read-only |
The set mode of SSM. Enumeration: 'auto': 2, 'manual': 1. |
hwClockSrcCfgSourceState | 1.3.6.1.4.1.2011.5.25.186.1.11.1.11 | integer | read-only |
The state of clock source. Enumeration: 'holdoff': 4, 'initial': 0, 'abnormal': 2, 'waitwtr': 3, 'normal': 1. |
hwClockSrcCfgFreqCheckResult | 1.3.6.1.4.1.2011.5.25.186.1.11.1.12 | integer | read-only |
The result of frequency check. Enumeration: 'abnormal': 0, 'normal': 1. |
hwClockSrcCfgSsmInterval | 1.3.6.1.4.1.2011.5.25.186.1.11.1.13 | integer32 | read-only |
Description. |
hwClockSrcCfgSsmTimeout | 1.3.6.1.4.1.2011.5.25.186.1.11.1.14 | integer32 | read-only |
Description. |
hwClockSrcCfgSabit | 1.3.6.1.4.1.2011.5.25.186.1.11.1.15 | integer | read-write |
The SA bit of E1 Port SSM information. Enumeration: 'invalid': 99, 'sa8': 8, 'sa7': 7, 'sa6': 6, 'sa5': 5, 'sa4': 4. |
hwClockSrcCfgClockId | 1.3.6.1.4.1.2011.5.25.186.1.11.1.16 | integer32 | read-write |
The clockid of clock source. |
hwClockSrcCfgClockIdSetMode | 1.3.6.1.4.1.2011.5.25.186.1.11.1.17 | integer | read-only |
The set mode of clockid. Enumeration: 'auto': 2, 'manual': 1. |
hwClockSrcCfgOutSsm | 1.3.6.1.4.1.2011.5.25.186.1.11.1.18 | integer | read-only |
Current output ssm. Enumeration: 'ssua': 4, 'prc': 2, 'ssub': 8, 'unknown': 16, 'invalid': 99, 'dn': 15, 'sec': 11, 'unk': 0. |
hwClockSrcCfgOutClockId | 1.3.6.1.4.1.2011.5.25.186.1.11.1.19 | integer | read-only |
Current output clockid. Enumeration: 'clockid3': 3, 'clockid2': 2, 'clockid1': 1, 'clockid0': 0, 'clockid7': 7, 'clockid6': 6, 'clockid5': 5, 'clockid4': 4, 'clockid9': 9, 'clockid8': 8, 'clockid15': 15, 'clockid10': 10, 'clockid11': 11, 'clockid14': 14, 'notsupport': 99, 'clockid13': 13, 'clockid12': 12. |
hwClockSrcCfgRowStatus | 1.3.6.1.4.1.2011.5.25.186.1.11.1.20 | rowstatus | read-only |
The row status. |
hwClockSrcCfgFreqDeviation | 1.3.6.1.4.1.2011.5.25.186.1.11.1.21 | octet string | read-only |
Freqdeviation value of clock source. |
hwClockSrcCfgPhyState | 1.3.6.1.4.1.2011.5.25.186.1.11.1.22 | integer | read-only |
The PHY clock state of ports. Enumeration: 'cardTypeNotSupport': 0, 'master': 2, 'slave': 1, 'portDown': 4, 'speedNotSupport': 3. |
hwClockSrcCfgNegotiationSlave | 1.3.6.1.4.1.2011.5.25.186.1.11.1.23 | integer | read-only |
Set PHY clock state to slave. Enumeration: 'enable': 1, 'disable': 2, 'notSupport': 0. |
hwClockCesAcrPortCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.12 | no-access |
The CES ACR clock port config table. |
|
1.3.6.1.4.1.2011.5.25.186.1.12.1 | no-access |
The entry of CES ACR clock port config table. |
||
hwClockCesAcrParentIfIndex | 1.3.6.1.4.1.2011.5.25.186.1.12.1.1 | interfaceindex | no-access |
Indicates the index of the parent interface. |
hwClockCesAcrChannelId | 1.3.6.1.4.1.2011.5.25.186.1.12.1.2 | integer32 | no-access |
Indicates the channel ID. |
hwClockCesAcrIfIndex | 1.3.6.1.4.1.2011.5.25.186.1.12.1.3 | interfaceindex | no-access |
Indicates the interface index. |
hwClockCesAcrPortName | 1.3.6.1.4.1.2011.5.25.186.1.12.1.4 | octet string | read-only |
Port name. |
hwClockCesAcrChannelType | 1.3.6.1.4.1.2011.5.25.186.1.12.1.5 | integer | read-only |
Indicates the interface type. The type can be E1/CE1 or T1/CT1. Enumeration: 'e1': 2, 't1': 1. |
hwClockCesAcrSourceMode | 1.3.6.1.4.1.2011.5.25.186.1.12.1.6 | integer | read-only |
Indicates the clock mode of the interface. master: indicates that the clock works in master mode and uses the internal clock signal. slave: indicates that the clock works in slave mode and uses the line clock signal. recovery-domain: indicates that the clock works in slave mode and uses the recovery domain clock signal. Enumeration: 'slave': 2, 'master': 1, 'recoveryDomain': 3. |
hwClockCesAcrRecoveryDomain | 1.3.6.1.4.1.2011.5.25.186.1.12.1.7 | integer32 | read-only |
Indicates the clock recovery domain of the interface. DEFVAL is 0. |
hwClockCesAcrPwDomain | 1.3.6.1.4.1.2011.5.25.186.1.12.1.8 | integer32 | read-only |
Indicates the clock PW domain of the interface. DEFVAL is 0. |
hwClockCesAcrPortCfgRowStatus | 1.3.6.1.4.1.2011.5.25.186.1.12.1.9 | rowstatus | read-only |
The row status. |
hwClockCesAcrMasterDomain | 1.3.6.1.4.1.2011.5.25.186.1.12.1.10 | integer32 | read-only |
Indicates the clock master domain of the interface. DEFVAL is 0. |
hwClockCesMode | 1.3.6.1.4.1.2011.5.25.186.1.12.1.11 | integer | read-only |
Indicates the clock CES recovery mode of the interface. DEFVAL is 0. Enumeration: 'acr': 1, 'dcr': 2. |
hwClockCesAcrCfgTable | 1.3.6.1.4.1.2011.5.25.186.1.13 | no-access |
The CES ACR clock source config table. |
|
1.3.6.1.4.1.2011.5.25.186.1.13.1 | no-access |
The entry of CES ACR clock source config table. |
||
hwClockCesAcrCfgSlot | 1.3.6.1.4.1.2011.5.25.186.1.13.1.1 | integer32 | no-access |
The slot ID of CES ACR clock source. |
hwClockCesAcrCfgCard | 1.3.6.1.4.1.2011.5.25.186.1.13.1.2 | integer32 | no-access |
The card ID of CES ACR clock source. |
hwClockCesAcrCfgDomain | 1.3.6.1.4.1.2011.5.25.186.1.13.1.3 | integer32 | no-access |
The recovery domain value of CES ACR clock source. |
hwClockCesAcrCfgDescr | 1.3.6.1.4.1.2011.5.25.186.1.13.1.4 | octet string | read-only |
The description of clock source. |
hwClockCesAcrCfgSyncEnable | 1.3.6.1.4.1.2011.5.25.186.1.13.1.5 | enabledstatus | read-only |
The enable flag of CES ACR clock source. |
hwClockCesAcrCfgSystemPriority | 1.3.6.1.4.1.2011.5.25.186.1.13.1.6 | integer32 | read-only |
The priority of system CES ACR clock source. DEFVAL is 0. |
hwClockCesAcrCfgSsm | 1.3.6.1.4.1.2011.5.25.186.1.13.1.7 | integer | read-only |
The SSM quality of CES ACR clock source. Enumeration: 'ssua': 4, 'prc': 2, 'ssub': 8, 'unknown': 16, 'dn': 15, 'sec': 11, 'unk': 0. |
hwClockCesAcrCfgClockId | 1.3.6.1.4.1.2011.5.25.186.1.13.1.8 | integer32 | read-only |
The clockid of clock source. DEFVAL is 0. |
hwClockCesAcrCfgSourceState | 1.3.6.1.4.1.2011.5.25.186.1.13.1.9 | integer | read-only |
The state of CES ACR clock source. Enumeration: 'holdoff': 4, 'initial': 0, 'abnormal': 2, 'waitwtr': 3, 'normal': 1. |
hwClockCesAcrCfgFreqCheckResult | 1.3.6.1.4.1.2011.5.25.186.1.13.1.10 | integer | read-only |
The result of CES ACR clock source frequency check. Enumeration: 'abnormal': 0, 'normal': 1. |
hwClockCesAcrCfgRowStatus | 1.3.6.1.4.1.2011.5.25.186.1.13.1.11 | rowstatus | read-only |
The row status. |
hwClockCesAcrDomainInfoTable | 1.3.6.1.4.1.2011.5.25.186.1.14 | no-access |
The CES ACR domain infomation table. |
|
1.3.6.1.4.1.2011.5.25.186.1.14.1 | no-access |
The entry of CES ACR domain infomation table. |
||
hwClockCesAcrDomianInfoSlot | 1.3.6.1.4.1.2011.5.25.186.1.14.1.1 | integer32 | no-access |
The slot ID of CES ACR clock source. |
hwClockCesAcrDomianInfoCard | 1.3.6.1.4.1.2011.5.25.186.1.14.1.2 | integer32 | no-access |
The card ID of CES ACR clock source. |
hwClockCesAcrDomianInfoDomain | 1.3.6.1.4.1.2011.5.25.186.1.14.1.3 | integer32 | no-access |
The recovery domain value of CES ACR clock source. |
hwClockCesAcrDomianInfoMasterPwName | 1.3.6.1.4.1.2011.5.25.186.1.14.1.4 | octet string | read-only |
Port name. |
hwClockCesAcrDomianInfoChannelId | 1.3.6.1.4.1.2011.5.25.186.1.14.1.5 | integer32 | read-only |
Indicates the channel ID. |
hwClockCesAcrDomianInfoState | 1.3.6.1.4.1.2011.5.25.186.1.14.1.6 | integer | read-only |
The state of CES ACR clock source. Enumeration: 'lock': 3, 'none': 1, 'wait': 2. |
hwClockClusterTopoTable | 1.3.6.1.4.1.2011.5.25.186.1.15 | no-access |
The CES ACR domain infomation table. |
|
1.3.6.1.4.1.2011.5.25.186.1.15.1 | no-access |
Description. |
||
hwClockClusterSyncType | 1.3.6.1.4.1.2011.5.25.186.1.15.1.1 | integer | read-only |
The type of clock inter-chassis sync. Enumeration: 'frequency': 1, 'time': 2. |
hwClockClusterTopoType | 1.3.6.1.4.1.2011.5.25.186.1.15.1.2 | integer | read-only |
The type of clock inter-chassis topo.. Enumeration: 'interlink': 1. |
hwClockClusterTopoLinkType | 1.3.6.1.4.1.2011.5.25.186.1.15.1.3 | integer | read-only |
The type of clock inter-chassis link. Enumeration: 'bits': 1. |
hwClockClusterTopoStatus | 1.3.6.1.4.1.2011.5.25.186.1.15.1.4 | integer | read-only |
The status of clock inter-chassis topo. Enumeration: 'fail': 1, 'success': 2. |
hwClockConformance | 1.3.6.1.4.1.2011.5.25.186.10 | |||
hwClockSourceCompliances | 1.3.6.1.4.1.2011.5.25.186.10.1 | |||
hwClockSourceCompliance | 1.3.6.1.4.1.2011.5.25.186.10.1.1 |
The compliance of clock MIB. |
||
hwClockSourceGroups | 1.3.6.1.4.1.2011.5.25.186.10.2 | |||
hwClockManageSysGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.8 |
The manage group. |
||
hwClockSysSelGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.9 |
The system selection group. |
||
hwClockSourceCfgGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.10 |
The clock source group. |
||
hwClockPortCfgGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.13 |
The port config of clock source group. |
||
hwClockBitsCfgGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.14 |
The BITS clock source group. |
||
hwClockTrapOidGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.15 |
The clock trap group. |
||
hwClockNotificationsGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.16 |
This is the group of clock notification. |
||
hwClockLineCfgGroup | 1.3.6.1.4.1.2011.5.25.186.10.2.17 |
The line clock group.. |