HUAWEI-CESOP-TDM-MIB: View SNMP OID List / Download MIB
VENDOR: HUAWEI
| Home | MIB: HUAWEI-CESOP-TDM-MIB | |||
|---|---|---|---|---|
| Download as: |
Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
|
|||
| Object Name | OID | Type | Access | Info |
| hwCesop | 1.3.6.1.4.1.2011.5.108 |
The MIB is used for defining huawei's CESoP management MIB objects. |
||
| hwCesopMibObjects | 1.3.6.1.4.1.2011.5.108.1 | |||
| hwCesopPortCfgTable | 1.3.6.1.4.1.2011.5.108.1.1 | no-access |
This table is used for setting CESoP port configuration. The index of this table is ifIndex. |
|
| 1.3.6.1.4.1.2011.5.108.1.1.1 | no-access |
This table is used for setting CESoP port configuration. The index of this entry is ifIndex. |
||
| hwCesopPortLineCoding | 1.3.6.1.4.1.2011.5.108.1.1.1.1 | integer | read-write |
Line coding mode of CESoP port. Options: 1. e1HDB3(1) -the line coding mode of CESoP port is e1HDB3 2. e1AMI(2) -the line coding mode of CESoP port is e1AMI 3. t1B8SZ(3) -the line coding mode of CESoP port is t1B8SZ Enumeration: 'e1AMI': 2, 'e1HDB3': 1, 't1B8SZ': 3. |
| hwCesopPortLoopback | 1.3.6.1.4.1.2011.5.108.1.1.1.2 | integer | read-write |
Loopback mode of CESoP port. Options: 1. e1NoLoop(1) -the loopback mode of CESoP port is e1NoLoop 2. e1LocalLoop(2) -the loopback mode of CESoP port is e1LocalLoop 3. e1RemoteLoop(3) -the loopback mode of CESoP port is e1RemoteLoop 4. e1PayloadLoop(7) -the loopback mode of CESoP port is e1PayloadLoop Enumeration: 'e1RemoteLoop': 3, 'e1NoLoop': 1, 'e1LocalLoop': 2, 'e1PayloadLoop': 7. |
| hwCesopPortClockSource | 1.3.6.1.4.1.2011.5.108.1.1.1.3 | integer | read-write |
Clock source mode of CESoP port. Options: 1. e1Syetem(1) -system clock 2. e1Line(2) -line clock 3. e1Net(5) -net clock 4. e1Net1(6) -net clock 1 5. e1Net2(7) -net clock 2 6. e1Net3(8) -net clock 3 7. invalid(-1) -invalid value Enumeration: 'e1Net3': 8, 'e1Net2': 7, 'e1Net1': 6, 'invalid': -1, 'e1Syetem': 1, 'e1Line': 2, 'e1Net': 5. |
| hwCesopPortLineStatus | 1.3.6.1.4.1.2011.5.108.1.1.1.4 | integer | read-only |
Line status of CESoP port. Options: 1. dsx1Normal(1) -the line alarm status of CESoP port is normal 2. dsx1Fault(2) -the line alarm status of CESoP port is fault Enumeration: 'dsx1Normal': 1, 'dsx1Fault': 2. |
| hwCesopPortRTPSwitch | 1.3.6.1.4.1.2011.5.108.1.1.1.5 | integer | read-write |
Status of RTP switch. Options: 1. enable(1) -status of RTP switch to enable 2. disable(2) -status of RTP switch to disable 3. invalid(-1) -invalid value Enumeration: 'enable': 1, 'disable': 2, 'invalid': -1. |
| hwCesopPortFrameMode | 1.3.6.1.4.1.2011.5.108.1.1.1.6 | integer | read-write |
Frame mode of CESoP port. Options: 1. t1SF(1) -the frame mode of CESoP port is SF 2. t1ESF(2) -the frame mode of CESoP port is ESF 3. invalid(-1) -invalid value Enumeration: 't1ESF': 2, 't1SF': 1, 'invalid': -1. |
| hwCesopPortPerfTable | 1.3.6.1.4.1.2011.5.108.1.2 | no-access |
The performance statistics of the CESoP port. The index of this table is ifIndex. |
|
| 1.3.6.1.4.1.2011.5.108.1.2.1 | no-access |
The performance statistics of the CESoP port. The index of this entry is ifIndex. |
||
| hwCesopPortPerfESs | 1.3.6.1.4.1.2011.5.108.1.2.1.1 | gauge32 | read-only |
The number of error seconds. |
| hwCesopPortPerfSESs | 1.3.6.1.4.1.2011.5.108.1.2.1.2 | gauge32 | read-only |
The number of serious error seconds. |
| hwCesopPortCurrentUASs | 1.3.6.1.4.1.2011.5.108.1.2.1.3 | gauge32 | read-only |
The number of unavailable seconds. |
| hwCesopBoardCfgTable | 1.3.6.1.4.1.2011.5.108.1.3 | no-access |
This table is used for setting CESoP board configuration. The indexes of this table are hwCesopFrameIndex, hwCesopSlotIndex and hwCesopZLIndex. |
|
| 1.3.6.1.4.1.2011.5.108.1.3.1 | no-access |
This table is used for setting CESoP board configuration. The indexes of this entry are hwCesopFrameIndex, hwCesopSlotIndex and hwCesopZLIndex. |
||
| hwCesopFrameIndex | 1.3.6.1.4.1.2011.5.108.1.3.1.1 | integer32 | no-access |
Frame ID of the CESoP board. Only the value 0 is supported. |
| hwCesopSlotIndex | 1.3.6.1.4.1.2011.5.108.1.3.1.2 | integer32 | no-access |
Slot ID of the CESoP board. |
| hwCesopZLIndex | 1.3.6.1.4.1.2011.5.108.1.3.1.3 | integer32 | no-access |
ZL chip ID of the CESoP board. Only the value 0 is supported. |
| hwCesopBoardIpAddress | 1.3.6.1.4.1.2011.5.108.1.3.1.4 | ipaddress | read-write |
Ip address of the CESoP board. |
| hwCesopBoardMac | 1.3.6.1.4.1.2011.5.108.1.3.1.5 | macaddress | read-only |
Mac address of the CESoP board. |
| hwCesopBoardOperStatus | 1.3.6.1.4.1.2011.5.108.1.3.1.6 | rowstatus | read-only |
The present operation status of the row. Options: 1. active(1) -the status of the row is active 2. notInService(2) -the status of the row is notInService 3. notReady(3) -the status of the row is notReady 4. createAndGo(4) -the status of the row is createAndGo 5. createAndWait(5) -the status of the row is createAndWait 6. destroy(6) -the status of the row is destroy Active(1) and notInService(2) are states, these values may be read or written. NotReady(3) is a state, this value may be read, but not written. CreateAndGo(4), createAndWait(5) and destroy(6) are actions, these values may be written, but are never read. |
| hwCesopBoardRecoveryClockSource | 1.3.6.1.4.1.2011.5.108.1.3.1.7 | integer32 | read-write |
Recovery clock source of the CESoP board. |
| hwCesopConnectCfgTable | 1.3.6.1.4.1.2011.5.108.1.4 | no-access |
This table is used for setting CESoP link configuration. The index of this table is hwCesopConnectIndex. |
|
| 1.3.6.1.4.1.2011.5.108.1.4.1 | no-access |
This table is used for setting CESoP link configuration. The index of this entry is hwCesopConnectIndex. |
||
| hwCesopConnectIndex | 1.3.6.1.4.1.2011.5.108.1.4.1.1 | integer32 | no-access |
CESoP link connection id. |
| hwCesopConnectPortIndex | 1.3.6.1.4.1.2011.5.108.1.4.1.2 | integer32 | read-only |
The index of CESoP interface. |
| hwCesopRemoteMac | 1.3.6.1.4.1.2011.5.108.1.4.1.3 | macaddress | read-only |
The remote MAC address. |
| hwCesopRemoteIp | 1.3.6.1.4.1.2011.5.108.1.4.1.4 | ipaddress | read-only |
The remote CESoP port IP. |
| hwCesopRemoteUDPPort | 1.3.6.1.4.1.2011.5.108.1.4.1.5 | integer32 | read-only |
The remote UDP label. |
| hwCesopLocalUDPPort | 1.3.6.1.4.1.2011.5.108.1.4.1.6 | integer32 | read-only |
The local UDP label. |
| hwCesopVlanId | 1.3.6.1.4.1.2011.5.108.1.4.1.7 | integer32 | read-only |
The VlanID. |
| hwCesopConnectRowStatus | 1.3.6.1.4.1.2011.5.108.1.4.1.8 | rowstatus | read-only |
The present operation status of the row. Options: 1. active(1) -the status of the row is active 2. notInService(2) -the status of the row is notInService 3. notReady(3) -the status of the row is notReady 4. createAndGo(4) -the status of the row is createAndGo 5. createAndWait(5) -the status of the row is createAndWait 6. destroy(6) -the status of the row is destroy Active(1) and notInService(2) are states, these values may be read or written. NotReady(3) is a state, this value may be read, but not written. CreateAndGo(4), createAndWait(5) and destroy(6) are actions, these values may be written, but are never read. |
| hwCesopRTPEnable | 1.3.6.1.4.1.2011.5.108.1.4.1.9 | integer | read-only |
The RTP switch of CESoP link. Options: 1. disable(1) -the RTP switch of CESoP link is disable 2. enable(2) -the RTP switch of CESoP link is enable Enumeration: 'enable': 2, 'disable': 1. |
| hwCesopJitterBuffer | 1.3.6.1.4.1.2011.5.108.1.4.1.10 | integer32 | read-only |
The jitterBuffer size of CESoP link. |
| hwCesopTDMPayloadSize | 1.3.6.1.4.1.2011.5.108.1.4.1.11 | integer32 | read-only |
The length of CESoP packets payload. +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | ... | | IPv4/IPv6 and UDP headers | | ... | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | OPTIONAL | +-- --+ | | +-- --+ | Fixed RTP Header (see [RFC3550]) | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | CESoPSN Control Word | +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+ | Packetized TDM data (Payload) | | ... | | ... | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+. The length of payload must be multiple of 32. |
| hwCesopTDMLoadTime | 1.3.6.1.4.1.2011.5.108.1.4.1.12 | integer32 | read-only |
The TDM LoadTime of CESoP link, it must be a multiple of 125. If the entered value is not a multiple of 125, the system rounds it down to the nearest multiple of 125. The value of this field must be equal to or lower than the jitterBuffer size of the same CESoP link. The unit of this field is microsecond(us). |
| hwCesopPriority | 1.3.6.1.4.1.2011.5.108.1.4.1.13 | integer32 | read-only |
The Priority of CESoP link |
| hwCesopTDMVCLIndex | 1.3.6.1.4.1.2011.5.108.1.4.1.14 | integer32 | read-only |
TDM-VCL ID |
| hwCesopRcvLSPLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.15 | integer32 | read-only |
The LSP label of received packet. |
| hwCesopRcvPWLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.16 | integer32 | read-only |
The PW label of received packet. |
| hwCesopTransLSPLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.17 | integer32 | read-only |
The LSP label of transmitted packet. |
| hwCesopTransPWLabel | 1.3.6.1.4.1.2011.5.108.1.4.1.18 | integer32 | read-only |
The PW label of transmitted packet. |
| hwCesopGateway | 1.3.6.1.4.1.2011.5.108.1.4.1.19 | ipaddress | read-only |
The gateway IP address. |
| hwCesopRcvSsrcId | 1.3.6.1.4.1.2011.5.108.1.4.1.20 | integer32 | read-only |
The recieve SSRC ID in RTP header. |
| hwCesopTxSsrcId | 1.3.6.1.4.1.2011.5.108.1.4.1.21 | integer32 | read-only |
The transmit SSRC ID in RTP header. |
| hwCesopPayloadType | 1.3.6.1.4.1.2011.5.108.1.4.1.22 | integer32 | read-only |
The payload type in RTP header. |
| hwCesopSnStartNum | 1.3.6.1.4.1.2011.5.108.1.4.1.23 | integer32 | read-only |
The sn start number in RTP header. |
| hwCesopRemoteMacStatus | 1.3.6.1.4.1.2011.5.108.1.4.1.24 | integer | read-only |
The remote MAC address resolving status. Options: 1. static(1) -the remote MAC address is configured by user. 2. resolving(2) -the remote MAC address has not beed resolved. 3. resolved(3) -the remote MAC address has been resolved. 4. aged(4) -the remote MAC address has been aged. Enumeration: 'resolved': 3, 'static': 1, 'aged': 4, 'resolving': 2. |
| hwCesopGlobalPerfTable | 1.3.6.1.4.1.2011.5.108.1.5 | no-access |
The table of CESoP global performance statistics. The indexes of this table are hwCesopPerfFrameIndex and hwCesopPerfBoardIndex. |
|
| 1.3.6.1.4.1.2011.5.108.1.5.1 | no-access |
The table of CESoP global performance statistics. The indexes of this entry are hwCesopPerfFrameIndex and hwCesopPerfBoardIndex. |
||
| hwCesopPerfFrameIndex | 1.3.6.1.4.1.2011.5.108.1.5.1.1 | integer32 | no-access |
Frame ID of the statistics CESoP board. Only the value 0 is supported. |
| hwCesopPerfBoardIndex | 1.3.6.1.4.1.2011.5.108.1.5.1.2 | integer32 | no-access |
Slot ID of the statistics CESoP board. |
| hwCesopProtocolStackMatchCountH | 1.3.6.1.4.1.2011.5.108.1.5.1.3 | counter64 | read-only |
The high byte of the match protocol packets counter. |
| hwCesopProtocolStackMatchCountL | 1.3.6.1.4.1.2011.5.108.1.5.1.4 | counter64 | read-only |
The low byte of the match protocol packets counter. |
| hwCesopProtocolStackNoMatchCount | 1.3.6.1.4.1.2011.5.108.1.5.1.5 | counter32 | read-only |
The number of mismatch protocol packets. |
| hwCesopClassifyNoMatchCount | 1.3.6.1.4.1.2011.5.108.1.5.1.6 | counter32 | read-only |
The number of mismatch classify rules packets. |
| hwCesopVerificationFailureCount | 1.3.6.1.4.1.2011.5.108.1.5.1.7 | counter32 | read-only |
The number of verification failure packets. |
| hwCesopIPv4ChecksumFailureCount | 1.3.6.1.4.1.2011.5.108.1.5.1.8 | counter32 | read-only |
The number of IP check sum failure packets. |
| hwCesopUDPChecksumFailureCount | 1.3.6.1.4.1.2011.5.108.1.5.1.9 | counter32 | read-only |
The number of UDP check sum failure packets. |
| hwCesopDropEvents | 1.3.6.1.4.1.2011.5.108.1.5.1.10 | counter64 | read-only |
The number of dropped events. |
| hwCesopBytesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.11 | counter64 | read-only |
The number of received bytes. |
| hwCesopFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.12 | counter64 | read-only |
The number of received frames. |
| hwCesopBroadcastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.13 | counter64 | read-only |
The number of received broadcast frames. |
| hwCesopMulticastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.14 | counter64 | read-only |
The number of received multicast frames. |
| hwCesopCRCAlignmentErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.15 | counter64 | read-only |
The number of received CRC errors packets. |
| hwCesopUndersizedFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.16 | counter64 | read-only |
The number of received undersized frames. |
| hwCesopOversizedPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.17 | counter64 | read-only |
The number of received oversized frames. |
| hwCesopFragmentsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.18 | counter64 | read-only |
The number of received fragments. |
| hwCesopJabberFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.19 | counter64 | read-only |
The number of received jabber frames. |
| hwCesopConflictFramesReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.20 | counter64 | read-only |
The number of received conflict frames. |
| hwCesopPacketsOfLength64Received | 1.3.6.1.4.1.2011.5.108.1.5.1.21 | counter64 | read-only |
The number of received 64-byte frames. |
| hwCesopPacketsOfLength65To127Received | 1.3.6.1.4.1.2011.5.108.1.5.1.22 | counter64 | read-only |
The number of received 65~127-byte frames. |
| hwCesopPacketsOfLength128To255Received | 1.3.6.1.4.1.2011.5.108.1.5.1.23 | counter64 | read-only |
The number of received 128~255-byte frames. |
| hwCesopPacketsOfLength256To511Received | 1.3.6.1.4.1.2011.5.108.1.5.1.24 | counter64 | read-only |
The number of received 256~511-byte frames. |
| hwCesopPacketsOfLength512To1023Received | 1.3.6.1.4.1.2011.5.108.1.5.1.25 | counter64 | read-only |
The number of received 512~1023-byte frames. |
| hwCesopPacketsOfLength1024To1518Received | 1.3.6.1.4.1.2011.5.108.1.5.1.26 | counter64 | read-only |
The number of received 1024~1518-byte frames. |
| hwCesopOctetsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.27 | counter64 | read-only |
The number of received bytes. |
| hwCesopUnicastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.28 | counter64 | read-only |
The number of received unicast packets. |
| hwCesopMulticastAndBroadcastPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.29 | counter64 | read-only |
The number of received multicast and broadcast packets. |
| hwCesopDiscardedPacketsInBound | 1.3.6.1.4.1.2011.5.108.1.5.1.30 | counter64 | read-only |
The number of received discarded packets. |
| hwCesopErroredPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.31 | counter64 | read-only |
The number of received errored packets. |
| hwCesopUnknownProtocolPacketsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.32 | counter64 | read-only |
The number of received unknown protocol packets. |
| hwCesopOctetsTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.33 | counter64 | read-only |
The number of transmitted bytes. |
| hwCesopUnicastPacketsTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.34 | counter64 | read-only |
The number of transmitted unicast packets. |
| hwCesopMulticastAndBroadcastPacketsTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.35 | counter64 | read-only |
The number of transmitted multicast and broadcast packets. |
| hwCesopDiscardedPacketsOutbound | 1.3.6.1.4.1.2011.5.108.1.5.1.36 | counter32 | read-only |
The number of transmitted discarded packets. |
| hwCesopErroredPacketsOutbound | 1.3.6.1.4.1.2011.5.108.1.5.1.37 | counter64 | read-only |
The number of transmitted errored packets. |
| hwCesopLengthOfTheOutboundPacketQueue | 1.3.6.1.4.1.2011.5.108.1.5.1.38 | counter32 | read-only |
The length of transmitted packets queues. |
| hwCesopDmacErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.39 | counter64 | read-only |
The number of destination MAC error packets. |
| hwCesopDipErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.40 | counter64 | read-only |
The number of destination IP error packets. |
| hwCesopDPortErrorsReceived | 1.3.6.1.4.1.2011.5.108.1.5.1.41 | counter64 | read-only |
The number of destination UDP port error packets. |
| hwCesopFramesTransmitted | 1.3.6.1.4.1.2011.5.108.1.5.1.42 | counter64 | read-only |
The number of transmitted packets. |
| hwCesopGlobalPerfClearStat | 1.3.6.1.4.1.2011.5.108.1.5.1.43 | integer | read-write |
Clear statistics information of the CESoP board. Options: 1. clear(1) -clear statistics information of the CESoP board Enumeration: 'clear': 1. |
| hwCesopConnectPerfTable | 1.3.6.1.4.1.2011.5.108.1.6 | no-access |
The table of CESoP connection performance statistics. The index of this table is hwCesopPerfConnectPwID. |
|
| 1.3.6.1.4.1.2011.5.108.1.6.1 | no-access |
The table of CESoP connection performance statistics. The index of this entry is hwCesopPerfConnectPwID. |
||
| hwCesopPerfConnectPwID | 1.3.6.1.4.1.2011.5.108.1.6.1.1 | integer32 | no-access |
The CESoP link ID of performance statistics. |
| hwCesopConnectEarlyPackets | 1.3.6.1.4.1.2011.5.108.1.6.1.2 | counter32 | read-only |
Early packets number of the CESoP link. |
| hwCesopConnectLatePackets | 1.3.6.1.4.1.2011.5.108.1.6.1.3 | counter32 | read-only |
Late packets number of the CESoP link. |
| hwCesopConnectUnderrunPackets | 1.3.6.1.4.1.2011.5.108.1.6.1.4 | counter32 | read-only |
Underrun packets number of the CESoP link. |
| hwCesopConnectLostPackets | 1.3.6.1.4.1.2011.5.108.1.6.1.5 | counter32 | read-only |
Lost packets number of the CESoP link. |
| hwCesopConnectCurrentQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.6 | counter32 | read-only |
Current queue length of the CESoP link. |
| hwCesopConnectAverageQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.7 | counter32 | read-only |
Average queue length of the CESoP link. |
| hwCesopConnectMaximumQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.8 | counter32 | read-only |
Maximum queue length of the CESoP link. |
| hwCesopConnectMinimumQueueLength | 1.3.6.1.4.1.2011.5.108.1.6.1.9 | counter32 | read-only |
Minimum queue length of the CESoP link. |
| hwCesopConnectPacketReceiveCount | 1.3.6.1.4.1.2011.5.108.1.6.1.10 | counter32 | read-only |
Received packets number of the CESoP link. |
| hwCesopConnectPacketTransmitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.11 | counter32 | read-only |
Transmitted packets number of the CESoP link. |
| hwCesopConnectByteTransmitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.12 | counter32 | read-only |
Transmitted bytes number of the CESoP link. |
| hwCesopConnectLBitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.13 | counter32 | read-only |
L bit status changed number of the CESoP link. |
| hwCesopConnectLBitSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.14 | counter32 | read-only |
L bit set number of the CESoP link. |
| hwCesopConnectRBitCount | 1.3.6.1.4.1.2011.5.108.1.6.1.15 | counter32 | read-only |
R bit status changed number of the CESoP link. |
| hwCesopConnectRBitSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.16 | counter32 | read-only |
L bit set number of the CESoP link. |
| hwCesopConnectBufOverRunCount | 1.3.6.1.4.1.2011.5.108.1.6.1.17 | counter32 | read-only |
JitterBuffer overflow number of the CESoP link. |
| hwCesopConnectBufOverRunSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.18 | counter32 | read-only |
JitterBuffer overflow reset number of the CESoP link. |
| hwCesopConnectBufUnderRunCount | 1.3.6.1.4.1.2011.5.108.1.6.1.19 | counter32 | read-only |
JitterBuffer underflow number of the CESoP link. |
| hwCesopConnectUnderRunSetTime | 1.3.6.1.4.1.2011.5.108.1.6.1.20 | counter32 | read-only |
JitterBuffer underflow reset number of the CESoP link. |
| hwCesopConnectPerfClearStat | 1.3.6.1.4.1.2011.5.108.1.6.1.21 | integer | read-write |
Clear statistics information of the CESoP link. Options: 1. clear(1) -clear statistics information of the CESoP link 2. invalid(-1) -invalid value Enumeration: 'clear': 1, 'invalid': -1. |
| hwCesopConnectChannelInPkts | 1.3.6.1.4.1.2011.5.108.1.6.1.22 | counter32 | read-only |
Statistics of the packets received on an E1 channel. |
| hwCesopConnectChannelOutPkts | 1.3.6.1.4.1.2011.5.108.1.6.1.23 | counter32 | read-only |
Statistics of the packets transmitted from an E1 channel. |
| hwCesopConnectChannelInSequenceErrors | 1.3.6.1.4.1.2011.5.108.1.6.1.24 | counter32 | read-only |
Statistics of the SN-error packets received on an E1 channel. |
| hwCesopConnectChannelInVlanInvalid | 1.3.6.1.4.1.2011.5.108.1.6.1.25 | counter32 | read-only |
Statistics of the VLAN ID-error packets received on an E1 channel. |
| hwCesopQueueUnderflow | 1.3.6.1.4.1.2011.5.108.1.6.1.26 | counter32 | read-only |
Statistics of the packets that are dropped due to queue overflow of an E1 channel. |
| hwCesopQueueOverflow | 1.3.6.1.4.1.2011.5.108.1.6.1.27 | counter32 | read-only |
Statistics of the packets that are dropped due to queue underflow of an E1 channel. |
| hwCesopConnectPacketReceiveErrorCount | 1.3.6.1.4.1.2011.5.108.1.6.1.28 | counter32 | read-only |
Statistics of the error packets received on an E1 channel. |
| hwCesopConnectPacketReceiveSSrcErrorCount | 1.3.6.1.4.1.2011.5.108.1.6.1.29 | counter32 | read-only |
Statistics of the SSRC-error packets received on an E1 channel. |