HPOTHERTRAP-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPOTHERTRAP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hp 1.3.6.1.4.1.11
       nm 1.3.6.1.4.1.11.2
           hpnsa 1.3.6.1.4.1.11.2.23
                 hpnsaECC 1.3.6.1.4.1.11.2.23.6
                 hpnsaRemoteAssist 1.3.6.1.4.1.11.2.23.8
                       hPECCMemory11 1.3.6.1.4.1.11.2.23.60.4360
ECC error corrected in memory module
                       hPECCMemory12 1.3.6.1.4.1.11.2.23.60.4361
Uncorrectable multi-bit ECC error has occurred in memory module
                       hPECCMemory13 1.3.6.1.4.1.11.2.23.60.4363
Repeated ECC error corrected in memory module
                       hPECCMemory14 1.3.6.1.4.1.11.2.23.60.4364
ECC memory module is operating outside of acceptable margins
                       hPECCMemory15 1.3.6.1.4.1.11.2.23.60.4365
Memory Mirroring switched to Slave Set
                       hPECCMemory16 1.3.6.1.4.1.11.2.23.60.4366
Faulty row switched to Hot Spare row
                       hPECCMemory2 1.3.6.1.4.1.11.2.23.60.24353
A single-bit error has been corrected in one of the memory modules.
                       hPECCMemory3 1.3.6.1.4.1.11.2.23.60.24354
Predictive failure in a memory module
                       hPECCMemory7 1.3.6.1.4.1.11.2.23.60.24357
A Multiple-bit error has occurred in one of the memory modules
                       hPECCMemory9 1.3.6.1.4.1.11.2.23.60.24359
Single-bit repeated error
                       rAVoltage1 1.3.6.1.4.1.11.2.23.80.109
The server has lost the power completely.
                       rAVoltage2 1.3.6.1.4.1.11.2.23.80.111
Voltage measured in the server has gone outside of -12V Upper Threshold.
                       rAVoltage3 1.3.6.1.4.1.11.2.23.80.113
Voltage measured in the server has gone outside of +3.3V Upper Threshold.
                       rAVoltage4 1.3.6.1.4.1.11.2.23.80.114
Voltage measured in the server has gone outside of +5V Upper Threshold.
                       rAVoltage5 1.3.6.1.4.1.11.2.23.80.115
Voltage measured in the server has gone outside of +12V Upper Threshold.
                       rAVoltage6 1.3.6.1.4.1.11.2.23.80.121
Voltage measured in the server has gone outside of -12V Lower Threshold.
                       rAVoltage10 1.3.6.1.4.1.11.2.23.80.122
The HP Remote Assistant Card's battery charging circuit is bad.
                       rAVoltage7 1.3.6.1.4.1.11.2.23.80.123
Voltage measured in the server has gone outside of +3.3V Lower Threshold.
                       rAVoltage8 1.3.6.1.4.1.11.2.23.80.124
Voltage measured in the server has gone outside of +5V Lower Threshold.
                       rAVoltage9 1.3.6.1.4.1.11.2.23.80.125
Voltage measured in the server has gone outside of +12V Lower Threshold.
                       rATemp1 1.3.6.1.4.1.11.2.23.80.211
The server temperature measured on the HP Remote Assistant Card has exceeded the configured warning threshold.
                       rATemp2 1.3.6.1.4.1.11.2.23.80.221
The server temperature measured on the HP Remote Assistant Card has exceeded the configured threshold and the server has been automatically shut down.
                       rATemp4 1.3.6.1.4.1.11.2.23.80.231
The server temperature measured on the HP Remote Assistant Card has exceeded the configured Graceful Shutdown threshold value by 5 degrees C and the server has been automatically shut down.
                       rAOther1 1.3.6.1.4.1.11.2.23.80.401
An administrator has logged in to the HP Remote Assistant Card.
                       rAOther3 1.3.6.1.4.1.11.2.23.80.402
An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP Remote Assistant Card within a 5-minute period of time.
                       rAOther5 1.3.6.1.4.1.11.2.23.80.403
The HP Remote Assistant Card's battery charging circuit is bad.
                       rAOther6 1.3.6.1.4.1.11.2.23.80.404
The HP Remote Assistant Card has been shut down.
                       rAOther20 1.3.6.1.4.1.11.2.23.80.405
A remote user disconnected from the HP RA or Remote Control card.
                       rAOther21 1.3.6.1.4.1.11.2.23.80.406
An administrator has been automatically disconnected from the HP Remote Assistant board. The administrator was inactive for more than five minutes.
                       rAOther23 1.3.6.1.4.1.11.2.23.80.407
An administrator has been prematurely disconnected from the Remote Assistant board.
                       rAOther25 1.3.6.1.4.1.11.2.23.80.408
An administrator failed to connect to the HP Remote Assistant board on a dialback
                       rAASR1 1.3.6.1.4.1.11.2.23.80.501
ASR has stopped notifying the HP Remote Assistant Card that the system is running correctly (the server probably hung or crashed).
                       rAASR2 1.3.6.1.4.1.11.2.23.80.502
The HP Remote Assistant card has restarted the server due to the NOS being hung.
                       rAASR3 1.3.6.1.4.1.11.2.23.80.503
The Automatic Server Restart software has been enabled by the Remote Assistant ASR timer.
                       rAASR4 1.3.6.1.4.1.11.2.23.80.504
The HP Remote Assistant Automatic Server Restart timer has been disabled.
                       rAOther7 1.3.6.1.4.1.11.2.23.80.601
An administrator has executed a remote on the server via the HP Remote Assistant Card.
                       rAOther9 1.3.6.1.4.1.11.2.23.80.602
An administrator has executed a remote power cycle on the server via the HP Remote Assistant Card.
                       rAOther12 1.3.6.1.4.1.11.2.23.80.603
An administrator has executed a remote power down of the server via the HP Remote Assistant Card.
                       rAOther18 1.3.6.1.4.1.11.2.23.80.701
The server's BIOS has successfully initialized the HP Remote Assistant Card during the boot process.
                       rABusUsage1 1.3.6.1.4.1.11.2.23.80.800
The 5-minute average EISA bus utilization has exceeded the configured threshold.
                       rAOther19 1.3.6.1.4.1.11.2.23.80.900
An administrator has executed Test Page from the HP Remote Assistant Configuration Utility.
                       rAOther29 1.3.6.1.4.1.11.2.23.80.901
The HP Remote Assistant modem was unable to connect to the TAP paging service modem.
                       rAOther31 1.3.6.1.4.1.11.2.23.80.902
HP Remote Assistant was unable to connect with the TAP paging service.
                       rAOther32 1.3.6.1.4.1.11.2.23.80.903
HP Remote Assistant was unable to log on to the TAP paging service.
                       rAOther35 1.3.6.1.4.1.11.2.23.80.904
The HP Remote Assistant pager message was rejected
                       rAOther10 1.3.6.1.4.1.11.2.23.80.1602
A remote user has executed a remote power cycle on the server via the HP RA or Remote Control.
                       rAOther13 1.3.6.1.4.1.11.2.23.80.1603
A remote user has executed a remote power down of the server via the HP RA or Remote Control card.
                       rATemp3 1.3.6.1.4.1.11.2.23.80.2221
The server temperature or voltage levels measured by the remote management hardware has exceeded the configured threshold. The server has been automatically shut down.
                       rAOther2 1.3.6.1.4.1.11.2.23.80.2401
A remote user has logged in to the HP RA or Remote Control card.
                       rAOther4 1.3.6.1.4.1.11.2.23.80.2402
An unauthorized user has made 3 or more unsuccessful attempts to log in to the HP RA or Remote Control card.
                       rAOther22 1.3.6.1.4.1.11.2.23.80.2406
A remote user has been automatically disconnected from the HP RA or Remote Control card, because of inactivity.
                       rAOther24 1.3.6.1.4.1.11.2.23.80.2407
A remote user has been prematurely disconnected from the HP RA or Remote Control card.
                       rAOther26 1.3.6.1.4.1.11.2.23.80.2408
A remote user failed to connect to the HP RA or Remote Control on a dialback
                       rAOther8 1.3.6.1.4.1.11.2.23.80.2601
An administrator has executed a remote on the server via the HP RA or Remote Control card.
                       rAOther17 1.3.6.1.4.1.11.2.23.80.2604
A remote user has executed a remote graceful shutdown of the server via the HP RA or Remote Control card.
                       rAOther30 1.3.6.1.4.1.11.2.23.80.2901
The HP RA or Remote Control modem was unable to connect to the TAP paging service modem.
                       rAOther33 1.3.6.1.4.1.11.2.23.80.2902
The HP RA or Remote Control was unable to connect to the TAP paging service.
                       rAOther34 1.3.6.1.4.1.11.2.23.80.2903
The HP RA or Remote Control was unable to log on to the TAP paging service.
                       rAOther36 1.3.6.1.4.1.11.2.23.80.2904
The HP RA or Remote Control pager message was rejected by the TAP paging service.
                       rAOther37 1.3.6.1.4.1.11.2.23.80.2905
The HP RA or Remote Control email notification message was not sent correctly.
                       rAOther38 1.3.6.1.4.1.11.2.23.80.2906
A modem error has been detected on the remote management card.
                       rAOther39 1.3.6.1.4.1.11.2.23.80.2907
TopTools Remote Control Card memory test started
                       rAOther40 1.3.6.1.4.1.11.2.23.80.2908
TopTools Remote Control Card memory test completed
                       rAOther41 1.3.6.1.4.1.11.2.23.80.2909
TopTools Remote Control Card memory test stopped by user
                       rAOther42 1.3.6.1.4.1.11.2.23.80.2910
TopTools Remote Control Card memory test error
                       rAOther43 1.3.6.1.4.1.11.2.23.80.2911
TopTools Remote Control Card started
                       rAOther44 1.3.6.1.4.1.11.2.23.80.2912
TopTools Remote Control Card detects a serious internal error that prevents normal operation of the card
                       rAOther45 1.3.6.1.4.1.11.2.23.80.2913
The firmware on the TopTools Remote Control has been updated
                       rAOther46 1.3.6.1.4.1.11.2.23.80.2914
The TopTools Remote Control backup battery has discharged to a level where it will not be able to power the card
                       rAOther47 1.3.6.1.4.1.11.2.23.80.2915
The battery on the TopTools Remote Control card is disconnected
                       rAOther48 1.3.6.1.4.1.11.2.23.80.2916
Remote Control Card: DHCP has assigned a new IP address
                       rAOther27 1.3.6.1.4.1.11.2.23.80.3408
Integrated RA configuration reset to defaults
                       rAOther11 1.3.6.1.4.1.11.2.23.80.3602
A remote user has executed a remote hard reset on the server via the HP RA or Remote Control.
                       rAOther14 1.3.6.1.4.1.11.2.23.80.3603
A remote user has executed a remote power up of the server via the HP RA or Remote Control card.
                       rAOther28 1.3.6.1.4.1.11.2.23.80.4408
TopTools Remote Control card configuration was corrupted and has been restored to default settings.
                       rAOther15 1.3.6.1.4.1.11.2.23.80.4603
Automatic power shutdown due to critical condition.
                       rAOther16 1.3.6.1.4.1.11.2.23.80.5603
Front panel power down.
                   hPFWUpdate1 1.3.6.1.4.1.11.2.230.101
Front Panel Controller firmware updated
                   hPFWUpdate2 1.3.6.1.4.1.11.2.230.102
Primary Hot Swap Cage Controller firmware updated
                   hPFWUpdate3 1.3.6.1.4.1.11.2.230.103
Secondary Hot Swap Cage Controller firmware updated
                   hPFWUpdate4 1.3.6.1.4.1.11.2.230.104
NetServer Management Controller firmware updated
                   hPFWUpdate5 1.3.6.1.4.1.11.2.230.105
CPU Management Controller firmware updated
                   storageCap1 1.3.6.1.4.1.11.2.230.4096
Volume Storage Capacity has exceeded the warning threshold level.
                   storageCap3 1.3.6.1.4.1.11.2.230.4097
Volume Storage Capacity has exceeded the minor threshold level.
                   storageCap5 1.3.6.1.4.1.11.2.230.4098
Volume Storage Capacity has exceeded the major threshold level.
                   systemHW1 1.3.6.1.4.1.11.2.230.4356
Post Error has occurred.
                   hPDiskSystem1 1.3.6.1.4.1.11.2.230.8210
The Defect List Threshold has been exceeded.
                   hPRaid1 1.3.6.1.4.1.11.2.230.8609
HPDA Controller: Cache Error
                   hPRaid3 1.3.6.1.4.1.11.2.230.8625
HPDA Logical Drive: Critical
                   hPRaid4 1.3.6.1.4.1.11.2.230.8626
HPDA Logical Drive Not Available
                   hPRaid5 1.3.6.1.4.1.11.2.230.8641
HPDA Hot Spare:Failed
                   hPRaid7 1.3.6.1.4.1.11.2.230.8642
HPDA Hot Spare Succeeded
                   hPRaid8 1.3.6.1.4.1.11.2.230.8657
HPDA Hard Disk Failed
                   hPRaid10 1.3.6.1.4.1.11.2.230.8673
HPDA Threshold Exceeded: Parity
                   hPRaid12 1.3.6.1.4.1.11.2.230.8674
HPDA Threshold Exceeded: Soft Errors
                   hPRaid14 1.3.6.1.4.1.11.2.230.8675
HPDA Threshold Exceeded: Hardware Errors
                   hPRaid16 1.3.6.1.4.1.11.2.230.8676
HPDA Threshold Exceeded: Miscellaneous Errors
                   hPRaid18 1.3.6.1.4.1.11.2.230.8677
HPDA Controller: NVRAM Age
                   redundantPower1 1.3.6.1.4.1.11.2.230.9101
The Redundant Power Supply module is not operating properly, but there is no power supply module hardware failure.
                   redundantPower2 1.3.6.1.4.1.11.2.230.9103
Indicates a failure with the AC power source that is connected to one of the redundant power supply units.
                   redundantPower4 1.3.6.1.4.1.11.2.230.9105
Indicates that one of the redundant power supply modules is not in normal operating condition.
                   redundantPower5 1.3.6.1.4.1.11.2.230.9106
Indicates that one of the redundant power supply modules is in over temperature protection mode.
                   redundantPower7 1.3.6.1.4.1.11.2.230.9107
Indicates that one of the redundant power supply modules has been physically removed from the HP NetServer Power Supply Subsystem.
                   redundantPower8 1.3.6.1.4.1.11.2.230.9108
Indicates that one of the redundant power supply modules has been physically inserted into the HP NetServer Power Supply Subsystem.
                   redundantPower9 1.3.6.1.4.1.11.2.230.9109
Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode.
                   redundantPower11 1.3.6.1.4.1.11.2.230.9110
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level.
                   redundantPower13 1.3.6.1.4.1.11.2.230.9111
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the emergency temperature level.
                   redundantPower14 1.3.6.1.4.1.11.2.230.9112
Power System failure A/C Lost
                   redundantPower15 1.3.6.1.4.1.11.2.230.9113
The Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation or is having problems powering up or down.
                   redundantPower37 1.3.6.1.4.1.11.2.230.9114
Power Supply Subsystem soft failure
                   temperature1 1.3.6.1.4.1.11.2.230.12288
Server temperature monitor cannot read temperature data.
                   temperature2 1.3.6.1.4.1.11.2.230.12289
Server temperature has exceeded the warning temperature threshold.
                   temperature3 1.3.6.1.4.1.11.2.230.12290
Server temperature has exceeded the emergency temperature threshold.
                   networkCard1 1.3.6.1.4.1.11.2.230.16385
The total number of packets with receive errors has exceeded the threshold.
                   networkCard5 1.3.6.1.4.1.11.2.230.16386
The total number of packets with transmit errors has exceeded the threshold.
                   networkCard9 1.3.6.1.4.1.11.2.230.16387
The total number of LAN Adapter reset errors has exceeded the threshold.
                   networkCard13 1.3.6.1.4.1.11.2.230.16388
The total number of alignment and CRC errors has exceeded the threshold.
                   networkCard17 1.3.6.1.4.1.11.2.230.16389
The total number of giant frame packets has exceeded the threshold.
                   networkCard21 1.3.6.1.4.1.11.2.230.16390
The total number of packets with length less than the required minimum length has exceeded the threshold.
                   networkCard25 1.3.6.1.4.1.11.2.230.16391
The total number of late collision errors has exceeded the threshold (the network is too large).
                   networkCard29 1.3.6.1.4.1.11.2.230.16392
The total number of colliding packets has exceeded the threshold (the network is too busy).
                   networkCard33 1.3.6.1.4.1.11.2.230.16393
The total number of carrier sense errors has exceeded the threshold.
                   networkCard37 1.3.6.1.4.1.11.2.230.16394
The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
                   networkCard41 1.3.6.1.4.1.11.2.230.16395
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
                   networkCard45 1.3.6.1.4.1.11.2.230.16396
The total number of Receive Overflow errors has exceeded the threshold.
                   networkCard49 1.3.6.1.4.1.11.2.230.16397
LAN adapter utilization count has exceeded the threshold.
                   networkCard53 1.3.6.1.4.1.11.2.230.16398
The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter.
                   networkCard55 1.3.6.1.4.1.11.2.230.16399
There possibly is a dataflow problem with your HP LAN adapter.
                   networkCard56 1.3.6.1.4.1.11.2.230.16400
The HP LAN adapter driver did not receive a transmit complete interrupt.
                   networkCard57 1.3.6.1.4.1.11.2.230.16401
There possibly is a dataflow problem with your HP LAN adapter.
                   networkCard58 1.3.6.1.4.1.11.2.230.16402
There is a dataflow problem with your HP LAN adapter - receive interrupts are being generated, but no receive packets are being present.
                   networkCard59 1.3.6.1.4.1.11.2.230.16403
There possibly is a problem with your HP LAN adapter - it generates too many buffer pointer errors.
                   networkCard60 1.3.6.1.4.1.11.2.230.16404
There possibly is a problem with your HP LAN adapter - DMA timed out while transmitting or receiving a packet.
                   networkCard61 1.3.6.1.4.1.11.2.230.16405
The HP LAN adapter is transmitting faster than the media can handle.
                   networkCard62 1.3.6.1.4.1.11.2.230.16406
The number of buffer fragments has exceeded the maximum number allowed by the network protocol in your HP LAN adapter.
                   networkCard63 1.3.6.1.4.1.11.2.230.16407
The total number of errors due to requests of an ECB being denied has exceeded the threshold.
                   networkCard64 1.3.6.1.4.1.11.2.230.16408
There possibly is a problem with your HP LAN adapter running in bus master mode.
                   networkCard65 1.3.6.1.4.1.11.2.230.16418
The active NIC in a redundant group has failed. The standby NIC has taken over.
                   networkCard67 1.3.6.1.4.1.11.2.230.16419
A previously failed NIC in a redundant group has become operational.
                   networkCard69 1.3.6.1.4.1.11.2.230.16420
The standby NIC in a redundant group has failed.
                   networkCard71 1.3.6.1.4.1.11.2.230.16421
All NICs (active and standby) in a redundant group have failed.
                   systemHW6 1.3.6.1.4.1.11.2.230.20528
Parity error has been detected in parity memory
                   systemHW8 1.3.6.1.4.1.11.2.230.20544
One of the bus masters caused a bus timeout
                   systemHW7 1.3.6.1.4.1.11.2.230.20545
IPMB Protocol Error
                   systemHW73 1.3.6.1.4.1.11.2.230.20546
NOS memory dump initiated
                   systemHW9 1.3.6.1.4.1.11.2.230.20560
I/0 channel check activated by device in EISA slot caused an error
                   systemHW11 1.3.6.1.4.1.11.2.230.20576
Software NMI has been generated
                   systemHW12 1.3.6.1.4.1.11.2.230.20577
Uncorrectable Bus Error
                   systemHW64 1.3.6.1.4.1.11.2.230.20578
Cache Protocol and Parity error
                   systemHW65 1.3.6.1.4.1.11.2.230.20579
Correctable data error
                   systemHW13 1.3.6.1.4.1.11.2.230.20592
Memory size has been adjusted during the Power-On-Self-Test during the last boot
                   systemHW14 1.3.6.1.4.1.11.2.230.20624
Parity error has occurred on a transfer to/from a device on one of the PCI buses
                   systemHW16 1.3.6.1.4.1.11.2.230.20640
System error has occurred in the PCI subsystem
                   systemHW21 1.3.6.1.4.1.11.2.230.20656
Processor or Terminator (#) not detected
                   systemHW18 1.3.6.1.4.1.11.2.230.20657
An uncorrectable Processor problem was detected.
                   systemHW19 1.3.6.1.4.1.11.2.230.20658
Processor (#) Disabled
                   systemHW59 1.3.6.1.4.1.11.2.230.20659
The CPU processor module is currently functioning properly, but it is no longer operating within acceptable margins
                   systemHW20 1.3.6.1.4.1.11.2.230.20660
Processor or Terminator Card Not Detected
                   systemHW22 1.3.6.1.4.1.11.2.230.20661
Processor Internal Error
                   systemHW23 1.3.6.1.4.1.11.2.230.20662
Processor Thermal Trip Failure
                   systemHW24 1.3.6.1.4.1.11.2.230.20663
Processor failed internal self test
                   systemHW25 1.3.6.1.4.1.11.2.230.20664
Processor hung during POST
                   systemHW26 1.3.6.1.4.1.11.2.230.20665
Processor startup/initialization failed
                   systemHW60 1.3.6.1.4.1.11.2.230.20666
PCI Hot Plug fault deasserted
                   systemHW61 1.3.6.1.4.1.11.2.230.20667
PCI Hot Plug Powered On
                   systemHW62 1.3.6.1.4.1.11.2.230.20668
PCI Hot Plug fault asserted
                   systemHW63 1.3.6.1.4.1.11.2.230.20669
PCI Hot Plug Powered off
                   systemHW27 1.3.6.1.4.1.11.2.230.20670
Multiple Fan Failure
                   systemHW79 1.3.6.1.4.1.11.2.230.20671
Configuration error in a processor slot
                   systemHW28 1.3.6.1.4.1.11.2.230.20672
Timeout of failsafe timer has occurred
                   systemHW81s 1.3.6.1.4.1.11.2.230.20673
CPU thermal trip
                   systemHW82s 1.3.6.1.4.1.11.2.230.20674
CPU hot warning
                   systemHW80s 1.3.6.1.4.1.11.2.230.20675
CPU internal error
                   systemHW83 1.3.6.1.4.1.11.2.230.20676
CPU mismatch
                   systemHW58 1.3.6.1.4.1.11.2.230.20680
Front Panel Button Violation
                   systemHW29 1.3.6.1.4.1.11.2.230.20704
Error logging for a specific error has been disabled due to too many errors of that kind in a short time period
                   systemHW43 1.3.6.1.4.1.11.2.230.20736
An event of warning severity has occurred in the system. For example, chassis door has been opened
                   systemHW44 1.3.6.1.4.1.11.2.230.20737
An event of critical severity has occurred in the system. For example, both system fans have failed
                   voltage2 1.3.6.1.4.1.11.2.230.20738
Fatal voltage threshold on one of the system voltage sensors has been exceeded. Voltage sensors are +12V, +5V, -12V, +3.3V to PCI, +3.3V to Processor
                   voltage1 1.3.6.1.4.1.11.2.230.20739
Warning voltage threshold on one of the system voltage channels has been exceeded. Voltage channels are +12V, +5V, -12V, +3.3V to PCI, +3.3V to Processor
                   systemHW10 1.3.6.1.4.1.11.2.230.20740
Voltage utilization warning
                   systemHW11s 1.3.6.1.4.1.11.2.230.20741
Voltage utilization error
                   aSR1 1.3.6.1.4.1.11.2.230.20752
Server has been restarted after the system watchdog timer has timed out due to NOS being hung
                   aSR2 1.3.6.1.4.1.11.2.230.20753
OS Watchdog Shutdown
                   aSR3 1.3.6.1.4.1.11.2.230.20754
OS Watchdog poweroff
                   systemFW3 1.3.6.1.4.1.11.2.230.20755
OS Boot Complete
                   systemFW2 1.3.6.1.4.1.11.2.230.20756
System Firmware Boot Start
                   systemFW4 1.3.6.1.4.1.11.2.230.20757
Machine Check Initiated
                   systemFW1 1.3.6.1.4.1.11.2.230.20758
Generic trap for Critical or Fatal type E0 event from system firmware
                   fibreChannel5 1.3.6.1.4.1.11.2.230.20759
The Fibre Channel Adapter is Online
                   fibreChannel6 1.3.6.1.4.1.11.2.230.20760
The Fibre Channel Adapter is Offline
                   systemHW30 1.3.6.1.4.1.11.2.230.20800
EISA Configuration Utility has altered system configuration
                   systemHW48 1.3.6.1.4.1.11.2.230.20832
The hardware eventlog has been cleared.
                   systemHW49 1.3.6.1.4.1.11.2.230.20833
An unrecognized HW log event was detected.
                   systemHW50 1.3.6.1.4.1.11.2.230.20848
The system has been rebooted.
                   systemHW51 1.3.6.1.4.1.11.2.230.22528
The Processor in the indicated slot has been disabled by the BIOS.
                   systemHW57 1.3.6.1.4.1.11.2.230.22544
A single or multiple ECC Error has been detected on the P6 bus.
                   hPFan7 1.3.6.1.4.1.11.2.230.22576
One of the fans in the Processor/PCI fan tray stopped.
                   hPFan8 1.3.6.1.4.1.11.2.230.22593
Two or more of the fans in the Processor/PCI Fan Tray have stopped or have been removed.
                   hPFan9 1.3.6.1.4.1.11.2.230.22608
Fan problem in Processor/PCI Fan Tray has been corrected.
                   aSR8 1.3.6.1.4.1.11.2.230.22624
The System has been reset by the microcontroller firmware because watchdog timer expired.
                   hPFan10 1.3.6.1.4.1.11.2.230.22640
One of the fans in the Memory Fan Tray stopped.
                   systemHW52 1.3.6.1.4.1.11.2.230.22651
A user has halted the system with the NMI switch on the front panel.
                   hPFan11 1.3.6.1.4.1.11.2.230.22657
Two or more of the fans in the Memory Fan Tray have stopped or been removed.
                   hPFan12 1.3.6.1.4.1.11.2.230.22672
Fan problem in the Memory Fan Tray has been corrected.
                   systemHW53 1.3.6.1.4.1.11.2.230.22688
Previously disabled Processor has been reinstalled.
                   redundantPower16 1.3.6.1.4.1.11.2.230.22705
Temperature alert on designated Power Supply.
                   redundantPower18 1.3.6.1.4.1.11.2.230.22706
Fan failure on designated Power Supply.
                   redundantPower20 1.3.6.1.4.1.11.2.230.22707
Voltage error on designated Power Supply.
                   redundantPower21 1.3.6.1.4.1.11.2.230.22708
Fan speed-up on designated Power Supply.
                   redundantPower23 1.3.6.1.4.1.11.2.230.22709
A power supply's 3.3 volt supply has gone bad
                   redundantPower24 1.3.6.1.4.1.11.2.230.22710
A power supply's 5 volt supply has gone bad
                   redundantPower25 1.3.6.1.4.1.11.2.230.22711
A power supply's 12 volt supply has gone bad
                   redundantPower26 1.3.6.1.4.1.11.2.230.22712
A power supply's -12 volt supply has gone bad
                   redundantPower27 1.3.6.1.4.1.11.2.230.22720
Indicated Power Supply has been removed or is not connected properly.
                   redundantPower28 1.3.6.1.4.1.11.2.230.22736
The indicated Power Supply has been inserted.
                   systemHW54 1.3.6.1.4.1.11.2.230.22752
The system has been reset because Control Board detected a critical error.
                   systemHW55 1.3.6.1.4.1.11.2.230.22768
The system has been power-cycled because Control Board detected a critical error.
                   systemHW56 1.3.6.1.4.1.11.2.230.22785
The Processor Card is missing or not properly terminated in indicated processor module.
                   hPEnvironment7 1.3.6.1.4.1.11.2.230.22801
Voltage Regulating Module (VRM) on the indicated processor module had failed.
                   storageCap2 1.3.6.1.4.1.11.2.230.24096
Volume Storage Capacity has exceeded the warning threshold level.
                   storageCap4 1.3.6.1.4.1.11.2.230.24097
Volume Storage Capacity has exceeded the minor threshold level.
                   storageCap6 1.3.6.1.4.1.11.2.230.24098
Volume Storage Capacity has exceeded the major threshold level.
                   systemHW2 1.3.6.1.4.1.11.2.230.24356
Post Error has occurred.
                   systemHW3 1.3.6.1.4.1.11.2.230.24358
Post Error has occurred.
                   temperature4 1.3.6.1.4.1.11.2.230.24449
Hot Swap Cage : Temperature monitor error occurred
                   temperature5 1.3.6.1.4.1.11.2.230.24451
Hot Swap Cage : Warning temperature exceeded
                   temperature6 1.3.6.1.4.1.11.2.230.24452
Hot Swap Cage : Emergency temperature exceeded!
                   systemHW32 1.3.6.1.4.1.11.2.230.24453
Power connection failure in one of the devices in the hot swap cage
                   systemHW34 1.3.6.1.4.1.11.2.230.24454
A device has been removed from the hot swap cage
                   systemHW35 1.3.6.1.4.1.11.2.230.24455
A device has been inserted into the hot swap cage
                   systemHW45 1.3.6.1.4.1.11.2.230.24456
Event log is getting full.
                   hPEnvironment1 1.3.6.1.4.1.11.2.230.25000
One of the voltage sensors crossed its lower non-critical threshold.
                   hPEnvironment2 1.3.6.1.4.1.11.2.230.25001
One of the voltage sensors crossed its lower critical threshold.
                   hPEnvironment3 1.3.6.1.4.1.11.2.230.25002
One of the voltage sensors crossed its lower non-recoverable threshold.
                   hPEnvironment4 1.3.6.1.4.1.11.2.230.25003
One of the voltage sensors crossed its upper non-critical threshold.
                   hPEnvironment5 1.3.6.1.4.1.11.2.230.25004
One of the voltage sensors crossed its upper critical threshold.
                   hPEnvironment6 1.3.6.1.4.1.11.2.230.25005
One of the voltage sensors crossed its upper non-recoverable threshold.
                   systemHW7s 1.3.6.1.4.1.11.2.230.25006
VRM failure
                   hPTemperature1 1.3.6.1.4.1.11.2.230.25007
One of the temperature sensors crossed its lower non-critical threshold.
                   hPTemperature2 1.3.6.1.4.1.11.2.230.25008
One of the temperature sensors crossed its lower critical threshold.
                   hPTemperature3 1.3.6.1.4.1.11.2.230.25009
One of the temperature sensors crossed its lower non-recoverable threshold.
                   hPTemperature4 1.3.6.1.4.1.11.2.230.25010
One of the temperature sensors crossed its upper non-critical threshold.
                   hPTemperature5 1.3.6.1.4.1.11.2.230.25011
One of the temperature sensors crossed its upper critical threshold.
                   hPTemperature6 1.3.6.1.4.1.11.2.230.25012
One of the temperature sensors crossed its upper non-recoverable threshold.
                   hPFan1 1.3.6.1.4.1.11.2.230.25013
One of the fan sensors crossed its lower non-critical threshold.
                   hPFan2 1.3.6.1.4.1.11.2.230.25014
One of the fan sensors crossed its lower critical threshold.
                   hPFan3 1.3.6.1.4.1.11.2.230.25015
One of the fan sensors crossed its lower non-recoverable threshold.
                   hPFan4 1.3.6.1.4.1.11.2.230.25016
One of the fan sensors crossed its upper non-critical threshold.
                   hPFan5 1.3.6.1.4.1.11.2.230.25017
One of the fan sensors crossed its upper critical threshold.
                   hPFan6 1.3.6.1.4.1.11.2.230.25018
One of the fan sensors crossed its upper non-recoverable threshold.
                   hPChassis1 1.3.6.1.4.1.11.2.230.25019
The chassis has been opened.
                   hPChassis2 1.3.6.1.4.1.11.2.230.25020
I/O area open
                   hPChassis3 1.3.6.1.4.1.11.2.230.25021
Processor area open
                   systemHW80 1.3.6.1.4.1.11.2.230.25022
Battery cycles have gone beyond the upper non-critical range
                   systemHW81 1.3.6.1.4.1.11.2.230.25023
Battery cycles have gone beyond the upper critical range
                   systemHW82 1.3.6.1.4.1.11.2.230.25024
Battery cycles have gone beyond the upper non-recoverable range
                   hPFan13 1.3.6.1.4.1.11.2.230.25025
A system fan module error has occurred
                   hPFan14 1.3.6.1.4.1.11.2.230.25026
A system fan module error has occurred
                   hPFan15 1.3.6.1.4.1.11.2.230.25027
Fan module failure
                   hPFan16 1.3.6.1.4.1.11.2.230.25028
Fan module failure
                   systemHW84 1.3.6.1.4.1.11.2.230.25780
Unrecoverable chipset error has occurred in system board .
                   hPRaid2 1.3.6.1.4.1.11.2.230.28609
HPDA Controller: Cache Error
                   hPRaid6 1.3.6.1.4.1.11.2.230.28641
HPDA Hot Spare:Failed
                   hPRaid9 1.3.6.1.4.1.11.2.230.28657
HPDA Hard Disk Failed
                   hPRaid11 1.3.6.1.4.1.11.2.230.28673
HPDA Threshold Exceeded: Parity
                   hPRaid13 1.3.6.1.4.1.11.2.230.28674
HPDA Threshold Exceeded: Soft Errors
                   hPRaid15 1.3.6.1.4.1.11.2.230.28675
HPDA Threshold Exceeded: Hardware Errors
                   hPRaid17 1.3.6.1.4.1.11.2.230.28676
HPDA Threshold Exceeded: Miscellaneous Errors
                   hPRaid19 1.3.6.1.4.1.11.2.230.28677
HPDA Controller: NVRAM Age
                   redundantPower29 1.3.6.1.4.1.11.2.230.29101
Indicated Power Supply has been removed.
                   redundantPower30 1.3.6.1.4.1.11.2.230.29102
The indicated Power Supply has been inserted.
                   redundantPower31 1.3.6.1.4.1.11.2.230.29103
The indicated Power Supply Unit power has failed.
                   redundantPower33 1.3.6.1.4.1.11.2.230.29104
Power supply subsystem redundancy gained.
                   redundantPower34 1.3.6.1.4.1.11.2.230.29105
Power supply sunsystem redundancy lost.
                   redundantPower35 1.3.6.1.4.1.11.2.230.29106
The server Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation.
                   redundantPower36 1.3.6.1.4.1.11.2.230.29107
The server Power Supply Subsystem has fewer than the required number of Power Supply Units installed for normal operation.
                   redundantPower32 1.3.6.1.4.1.11.2.230.29109
Predictive failure/alert in power supply
                   systemHW4 1.3.6.1.4.1.11.2.230.34356
System boot (POST Complete).
                   systemHW5 1.3.6.1.4.1.11.2.230.34357
Netserver Management Controller started
                   systemHW46 1.3.6.1.4.1.11.2.230.34456
Event log cleared
                   systemHW47 1.3.6.1.4.1.11.2.230.44456
SDR area cleared
                   systemHW83s 1.3.6.1.4.1.11.2.230.44457
FRU internal use area cleared
                   systemHW100 1.3.6.1.4.1.11.2.230.53001
SMART predictive failure detected
                   systemHW33 1.3.6.1.4.1.11.2.230.54453
system Voltage failure
                   systemHW36 1.3.6.1.4.1.11.2.230.54454
A SCSI cable has been removed from the hot swap cage.
                   systemHW37 1.3.6.1.4.1.11.2.230.54455
A SCSI cable was attached to hot swap cage.
                   systemHW38 1.3.6.1.4.1.11.2.230.54456
A SCSI terminator has been removed from the hot swap cage.
                   systemHW39 1.3.6.1.4.1.11.2.230.54457
A SCSI terminator has been attached in the hot swap cage.
                   systemHW74 1.3.6.1.4.1.11.2.230.54460
SCSI Duplex Board has been removed
                   systemHW75 1.3.6.1.4.1.11.2.230.54461
SCSI Duplex Board has been inserted
                   systemHW78 1.3.6.1.4.1.11.2.230.54464
SCSI Bus Type has changed
                   systemHW76 1.3.6.1.4.1.11.2.230.54465
Normal ACPI server shutdown
                   systemHW77 1.3.6.1.4.1.11.2.230.54466
ACPI hardware failure
                   networkCard2 1.3.6.1.4.1.11.2.230.116385
The total number of packets with receive errors has exceeded the threshold.
                   networkCard6 1.3.6.1.4.1.11.2.230.116386
The total number of packets with transmit errors has exceeded the threshold.
                   networkCard10 1.3.6.1.4.1.11.2.230.116387
The total number of LAN Adapter reset errors has exceeded the threshold.
                   networkCard14 1.3.6.1.4.1.11.2.230.116388
The total number of alignment and CRC errors has exceeded the threshold.
                   networkCard18 1.3.6.1.4.1.11.2.230.116389
The total number of giant frame packets has exceeded the threshold.
                   networkCard22 1.3.6.1.4.1.11.2.230.116390
The total number of packets with length less than the required minimum length has exceeded the threshold.
                   networkCard26 1.3.6.1.4.1.11.2.230.116391
The total number of late collision errors has exceeded the threshold (the network is too large).
                   networkCard30 1.3.6.1.4.1.11.2.230.116392
The total number of colliding packets has exceeded the threshold (the network is too busy).
                   networkCard34 1.3.6.1.4.1.11.2.230.116393
The total number of carrier sense errors has exceeded the threshold.
                   networkCard38 1.3.6.1.4.1.11.2.230.116394
The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
                   networkCard42 1.3.6.1.4.1.11.2.230.116395
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
                   networkCard46 1.3.6.1.4.1.11.2.230.116396
The total number of Receive Overflow errors has exceeded the threshold.
                   networkCard50 1.3.6.1.4.1.11.2.230.116397
LAN adapter utilization count has exceeded the threshold.
                   networkCard54 1.3.6.1.4.1.11.2.230.116398
The LAN adapter which the alarms were configured for, has been replaced by another type of LAN adapter.
                   networkCard66 1.3.6.1.4.1.11.2.230.116418
The active NIC in a redundant group has failed. The standby NIC has taken over.
                   networkCard68 1.3.6.1.4.1.11.2.230.116419
A previously failed NIC in a redundant group has become operational.
                   networkCard70 1.3.6.1.4.1.11.2.230.116420
The standby NIC in a redundant group has failed.
                   networkCard72 1.3.6.1.4.1.11.2.230.116421
All NICs (active and standby) in a redundant group have failed.
                   redundantPower3 1.3.6.1.4.1.11.2.230.209103
Indicates a failure with the AC power source that is connected to one of the redundant power supply units.
                   redundantPower6 1.3.6.1.4.1.11.2.230.209106
Indicates that one of the redundant power supply modules is in over temperature protection mode.
                   redundantPower10 1.3.6.1.4.1.11.2.230.209109
Indicates that one of the redundant power supply modules in the HP NetServer has recovered from an over temperature protection mode.
                   redundantPower12 1.3.6.1.4.1.11.2.230.209110
Indicates that one of the redundant power supply modules in the HP NetServer has exceeded the warning temperature level.
                   networkCard3 1.3.6.1.4.1.11.2.230.216385
The total number of packets with receive errors has exceeded the threshold.
                   networkCard7 1.3.6.1.4.1.11.2.230.216386
The total number of packets with transmit errors has exceeded the threshold.
                   networkCard11 1.3.6.1.4.1.11.2.230.216387
The total number of LAN Adapter reset errors has exceeded the threshold.
                   networkCard15 1.3.6.1.4.1.11.2.230.216388
The total number of alignment and CRC errors has exceeded the threshold.
                   networkCard19 1.3.6.1.4.1.11.2.230.216389
The total number of giant frame packets has exceeded the threshold.
                   networkCard23 1.3.6.1.4.1.11.2.230.216390
The total number of packets with length less than the required minimum length has exceeded the threshold.
                   networkCard27 1.3.6.1.4.1.11.2.230.216391
The total number of late collision errors has exceeded the threshold (the network is too large).
                   networkCard31 1.3.6.1.4.1.11.2.230.216392
The total number of colliding packets has exceeded the threshold (the network is too busy).
                   networkCard35 1.3.6.1.4.1.11.2.230.216393
The total number of carrier sense errors has exceeded the threshold.
                   networkCard39 1.3.6.1.4.1.11.2.230.216394
The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
                   networkCard43 1.3.6.1.4.1.11.2.230.216395
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
                   networkCard47 1.3.6.1.4.1.11.2.230.216396
The total number of Receive Overflow errors has exceeded the threshold.
                   networkCard51 1.3.6.1.4.1.11.2.230.216397
LAN adapter utilization count has exceeded the threshold.
                   systemHW10s 1.3.6.1.4.1.11.2.230.220560
I/0 channel check activated by device in EISA slot caused an error
                   hPECCMemory10 1.3.6.1.4.1.11.2.230.220592
System memory size reduced due to error in memory slot
                   systemHW15 1.3.6.1.4.1.11.2.230.220624
Parity error has occurred on a transfer to or from a device on one of the PCI buses
                   systemHW17 1.3.6.1.4.1.11.2.230.220640
System error has occurred in the PCI subsystem
                   aSR4 1.3.6.1.4.1.11.2.230.220752
Server has been restarted after the system watchdog timer has timed out due to NOS being hung
                   systemHW31 1.3.6.1.4.1.11.2.230.220800
Configuration Utility has altered system configuration
                   redundantPower17 1.3.6.1.4.1.11.2.230.222705
Temperature alert on designated Power Supply.
                   redundantPower19 1.3.6.1.4.1.11.2.230.222706
Fan failure on designated Power Supply.
                   redundantPower22 1.3.6.1.4.1.11.2.230.222708
Fan speed-up on designated Power Supply.
                   temperature7 1.3.6.1.4.1.11.2.230.224449
Hot Swap Cage : Temperature monitor error occurred
                   temperature8 1.3.6.1.4.1.11.2.230.224451
Hot Swap Cage : Warning temperature exceeded
                   temperature9 1.3.6.1.4.1.11.2.230.224452
Hot Swap Cage : Emergency temperature exceeded!
                   systemHW40 1.3.6.1.4.1.11.2.230.224453
Power connection failure in one of the devices in the hot swap cage
                   systemHW41 1.3.6.1.4.1.11.2.230.224454
A device has been removed from the hot swap cage
                   systemHW42 1.3.6.1.4.1.11.2.230.224455
A device has been inserted into the hot swap cage
                   systemHW67 1.3.6.1.4.1.11.2.230.254454
A SCSI cable has been removed from the hot swap cage.
                   systemHW68 1.3.6.1.4.1.11.2.230.254455
A SCSI cable was attached to the hot swap cage.
                   systemHW69 1.3.6.1.4.1.11.2.230.254456
A SCSI terminator has been removed from the hot swap cage.
                   systemHW70 1.3.6.1.4.1.11.2.230.254457
A SCSI terminator has been attached in the hot swap cage.
                   networkCard4 1.3.6.1.4.1.11.2.230.316385
The total number of packets with receive errors has exceeded the threshold.
                   networkCard8 1.3.6.1.4.1.11.2.230.316386
The total number of packets with transmit errors has exceeded the threshold.
                   networkCard12 1.3.6.1.4.1.11.2.230.316387
The total number of LAN Adapter reset errors has exceeded the threshold.
                   networkCard16 1.3.6.1.4.1.11.2.230.316388
The total number of alignment and CRC errors has exceeded the threshold.
                   networkCard20 1.3.6.1.4.1.11.2.230.316389
The total number of giant frame packets has exceeded the threshold.
                   networkCard24 1.3.6.1.4.1.11.2.230.316390
The total number of packets with length less than the required minimum length has exceeded the threshold.
                   networkCard28 1.3.6.1.4.1.11.2.230.316391
The total number of late collision errors has exceeded the threshold (the network is too large).
                   networkCard32 1.3.6.1.4.1.11.2.230.316392
The total number of colliding packets has exceeded the threshold (the network is too busy).
                   networkCard36 1.3.6.1.4.1.11.2.230.316393
The total number of carrier sense errors has exceeded the threshold.
                   networkCard40 1.3.6.1.4.1.11.2.230.316394
The total number of adapter deferrals has exceeded the threshold (the network is forever busy).
                   networkCard44 1.3.6.1.4.1.11.2.230.316395
The total number of No ECB errors (LAN adapter is out of receive buffers) errors has exceeded the threshold.
                   networkCard48 1.3.6.1.4.1.11.2.230.316396
The total number of Receive Overflow errors has exceeded the threshold.
                   networkCard52 1.3.6.1.4.1.11.2.230.316397
LAN adapter utilization count has exceeded the threshold.
                   aSR5 1.3.6.1.4.1.11.2.230.320752
Server has not been restarted after the system watchdog timer has timed out due to NOS being hung
                   systemHW71 1.3.6.1.4.1.11.2.230.324454
A drive has been removed from the hot swap cage
                   systemHW72 1.3.6.1.4.1.11.2.230.324455
A drive has been inserted into the hot swap cage
                   aSR6 1.3.6.1.4.1.11.2.230.420752
Server has been powered down after the system watchdog timer has timed out due to NOS being hung
                   aSR7 1.3.6.1.4.1.11.2.230.520752
Server has been power cycled after the system watchdog timer has timed out due to NOS being hung
 hpnr 1.3.6.1.4.1.16
       hpNetRAID 1.3.6.1.4.1.16.1
           hpNetRaidMib 1.3.6.1.4.1.16.1.1
               raidTraps 1.3.6.1.4.1.16.1.1.200
 adaptec 1.3.6.1.4.1.795
         storagemanagement 1.3.6.1.4.1.795.2
             cyclone 1.3.6.1.4.1.795.2.5
                 cycTraps 1.3.6.1.4.1.795.2.5.9000
                   sCSISmart22 1.3.6.1.4.1.795.2.50.126
Aspi: initializing
         adaptecRaid 1.3.6.1.4.1.795.3
         adaptecNm 1.3.6.1.4.1.795.4
             adaptecNmScsiStatus 1.3.6.1.4.1.795.4.1
                   adaptecSCSI1 1.3.6.1.4.1.795.4.10.8193
Device Database has been corrupted.
                   adaptecSCSI3 1.3.6.1.4.1.795.4.10.8194
SCSI Status agent was unloaded from a NetWare Server.
                   adaptecSCSI5 1.3.6.1.4.1.795.4.10.8196
One of the SCSI HBAs can no longer be detected by the SCSI Status agent.
                   adaptecSCSI7 1.3.6.1.4.1.795.4.10.8197
A Host Adapter which has failed, has become accessible again.
                   adaptecSCSI9 1.3.6.1.4.1.795.4.10.8198
A new SCSI Host Bus Adapter has been discovered or device database has been cleared.
                   adaptecSCSI11 1.3.6.1.4.1.795.4.10.8199
One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent.
                   adaptecSCSI13 1.3.6.1.4.1.795.4.10.8200
A SCSI device which has failed, has become accessible again.
                   adaptecSCSI15 1.3.6.1.4.1.795.4.10.8201
A new SCSI device has been discovered.
                   adaptecSCSI17 1.3.6.1.4.1.795.4.10.8205
The SCSI Status agent detected that the Host Bus Adapter has been changed.
                   adaptecSCSI21 1.3.6.1.4.1.795.4.10.8206
The SCSI Status agent detected that a SCSI device installed on the server has been changed.
                   adaptecSCSI19 1.3.6.1.4.1.795.4.10.8208
The SCSI Status agent sent a request to an HBA and the request never completed.
                   adaptecSCSI23 1.3.6.1.4.1.795.4.10.8209
The SCSI Status agent sent a request to a SCSI device and the request never completed.
                   adaptecSCSI2 1.3.6.1.4.1.795.4.10.18193
Device Database has been corrupted.
                   adaptecSCSI4 1.3.6.1.4.1.795.4.10.18194
SCSI Status agent was unloaded from a NetWare Server.
                   adaptecSCSI6 1.3.6.1.4.1.795.4.10.18196
One of the SCSI HBAs can no longer be detected by the SCSI Status agent.
                   adaptecSCSI8 1.3.6.1.4.1.795.4.10.18197
A Host Adapter which has failed, has become accessible again.
                   adaptecSCSI10 1.3.6.1.4.1.795.4.10.18198
A new SCSI Host Bus Adapter has been discovered or device database has been cleared.
                   adaptecSCSI12 1.3.6.1.4.1.795.4.10.18199
One of the SCSI devices installed on the server can no longer be detected by the SCSI Status agent.
                   adaptecSCSI14 1.3.6.1.4.1.795.4.10.18200
A SCSI device which has failed, has become accessible again.
                   adaptecSCSI16 1.3.6.1.4.1.795.4.10.18201
A new SCSI device has been discovered.
                   adaptecSCSI18 1.3.6.1.4.1.795.4.10.18205
The SCSI Status agent detected that the Host Bus Adapter has been changed.
                   adaptecSCSI22 1.3.6.1.4.1.795.4.10.18206
The SCSI Status agent detected that a SCSI device installed on the server has been changed.
                   adaptecSCSI20 1.3.6.1.4.1.795.4.10.18208
The SCSI Status agent sent a request to an HBA and the request never completed.
                   adaptecSCSI24 1.3.6.1.4.1.795.4.10.18209
The SCSI Status agent sent a request to a SCSI device and the request never completed.
         raidproducts 1.3.6.1.4.1.795.10
               aac 1.3.6.1.4.1.795.10.1
                   aac_hpn 1.3.6.1.4.1.795.10.1.50
 symbios 1.3.6.1.4.1.1123
           coloradosprings 1.3.6.1.4.1.1123.3
               scsi 1.3.6.1.4.1.1123.3.1
                   symc8xx 1.3.6.1.4.1.1123.3.1.2
                       symTrap 1.3.6.1.4.1.1123.3.1.2.2
 eMylex1 1.3.6.1.4.1.1608
           eMylex2 1.3.6.1.4.1.1608.1
               eMylex3 1.3.6.1.4.1.1608.1.1
                   eMylex4 1.3.6.1.4.1.1608.1.1.1
                       eMylex5 1.3.6.1.4.1.1608.1.1.1.9
                           eMylexRaidEventInformation 1.3.6.1.4.1.1608.1.1.1.9.1
                               dmtfStd 1.3.6.1.4.1.1608.1.1.1.9.1.1
                                   dmtfComponents 1.3.6.1.4.1.1608.1.1.1.9.1.1.1
                                       dmtfGroups 1.3.6.1.4.1.1608.1.1.1.9.1.1.1.1