HPNSAHOTSWAPSUBSYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPNSAHOTSWAPSUBSYSTEM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hp 1.3.6.1.4.1.11
       nm 1.3.6.1.4.1.11.2
           hpnsa 1.3.6.1.4.1.11.2.23
                 hpnsaHotSwap 1.3.6.1.4.1.11.2.23.20
                       hpnsaHSMibRev 1.3.6.1.4.1.11.2.23.20.1
                           hpnsaHSMibRevMajor 1.3.6.1.4.1.11.2.23.20.1.1 integer read-only
The major revision level of the MIB.
                           hpnsaHSMibRevMinor 1.3.6.1.4.1.11.2.23.20.1.2 integer read-only
The minor revision level of the MIB.
                       hpnsaHSAgent 1.3.6.1.4.1.11.2.23.20.2
                           hpnsaHSAgentTable 1.3.6.1.4.1.11.2.23.20.2.1 no-access
A table of SNMP Agents that satisfy requests for this MIB.
                               hpnsaHSAgentEntry 1.3.6.1.4.1.11.2.23.20.2.1.1 no-access
A description of the agents that access Hot Swap Subsystem
                                   hpnsaHSAgentIndex 1.3.6.1.4.1.11.2.23.20.2.1.1.1 integer read-only
A unique index for this module description.
                                   hpnsaHSAgentName 1.3.6.1.4.1.11.2.23.20.2.1.1.2 displaystring read-only
Name of the Agent/Agents satisfying SNMP requests for this MIB.
                                   hpnsaHSAgentVersion 1.3.6.1.4.1.11.2.23.20.2.1.1.3 displaystring read-only
Version number of the Agent/Agents satisfying SNMP requests for this MIB.
                                   hpnsaHSAgentDate 1.3.6.1.4.1.11.2.23.20.2.1.1.4 octet string read-only
The date on which this Agent was created. field octets contents range _________________________________________________ 1 1 years since 1900 0..255 2 2 month 1..12 3 3 day 1..31 4 4 hour 0..23 5 5 minute 0..59 6 6 second 0..59
                       hpnsaHSModule 1.3.6.1.4.1.11.2.23.20.3
                           hpnsaHSModuleTable 1.3.6.1.4.1.11.2.23.20.3.1 no-access
A table of Hot Swap Subsystem module information entries.
                               hpnsaHSModuleEntry 1.3.6.1.4.1.11.2.23.20.3.1.1 no-access
Hot Swap Subsystem module information.
                                   hpnsaHSModuleIndex 1.3.6.1.4.1.11.2.23.20.3.1.1.1 integer read-only
A unique index for the Hot Swap module.
                                   hpnsaHSModuleScsiCableType 1.3.6.1.4.1.11.2.23.20.3.1.1.2 integer read-only
The SCSI cable type attached to the backplane on the right side a Hot Swap Subsystem cage. Enumeration: 'wide': 1, 'narrow': 2, 'no-cable': 4, 'error': 3.
                                   hpnsaHSModuleTempStatus 1.3.6.1.4.1.11.2.23.20.3.1.1.3 integer read-only
Status of the Hot Swap Subsystem's temperature sensor. Enumeration: 'normal': 2, 'warning': 3, 'emergency': 4, 'error': 1.
                                   hpnsaHSModuleSwitchState 1.3.6.1.4.1.11.2.23.20.3.1.1.4 integer read-only
Status of the DIP switches on the Hot Swap Subsystem. Enumeration: 'disabled': 1, 'enabled': 2.
                                   hpnsaHSModuleDeviceStartup 1.3.6.1.4.1.11.2.23.20.3.1.1.5 integer read-only
State of the Disk Spin Up DIP switch on the Hot Swap Subsystem. 1 = disks spin up with the system after a period of time 2 = disks spin up after receiving SCSI Start Command Enumeration: 'by-start-command': 2, 'at-poweron': 1.
                                   hpnsaHSModuleMiddleDrvAddr 1.3.6.1.4.1.11.2.23.20.3.1.1.6 integer read-only
State of the Middle Drive Address DIP switch on the Hot Swap Subsystem. 1 = lowest value, either 0 or 8 depending on High Eight Address 2 = default, either 2 or 10 depending on High Eight Address Enumeration: 'lowest': 1, 'default': 2.
                                   hpnsaHSModuleHi8ScsiAddr 1.3.6.1.4.1.11.2.23.20.3.1.1.7 integer read-only
State of the High Eight SCSI Address DIP switch on the Hot Swap Subsystem. 1 = SCSI address range from 1 to 7 2 = SCSI address range from 9 to 15 Enumeration: 'lo-range-1to7': 2, 'hi-range-9to15': 1.
                       hpnsaHSDev 1.3.6.1.4.1.11.2.23.20.4
                           hpnsaHSDevTable 1.3.6.1.4.1.11.2.23.20.4.1 no-access
A table of Hot Swap Subsystem device information entries.
                               hpnsaHSDevEntry 1.3.6.1.4.1.11.2.23.20.4.1.1 no-access
Hot Swap Subsystem device information.
                                   hpnsaHSDevModuleIndex 1.3.6.1.4.1.11.2.23.20.4.1.1.1 integer read-only
A unique index for the Hot Swap module.
                                   hpnsaHSDevIndex 1.3.6.1.4.1.11.2.23.20.4.1.1.2 integer read-only
Physical device number in the Hot Swap Module.
                                   hpnsaHSDevExistence 1.3.6.1.4.1.11.2.23.20.4.1.1.3 integer read-only
Defines whether a device exists in the physical slot of the Hot Swap Subsystem. Enumeration: 'not-present': 2, 'present': 1.
                                   hpnsaHSDevScsiAddr 1.3.6.1.4.1.11.2.23.20.4.1.1.4 integer read-only
SCSI address of the device in the physical slot of the Hot Swap Subsystem.
                                   hpnsaHSDevPowerStatus 1.3.6.1.4.1.11.2.23.20.4.1.1.5 integer read-only
Defines whether the power connector of a particular device in the Hot Swap Subsystem is connected. Enumeration: 'connected': 2, 'not-connected': 1.
                           hpnsaHSPwrAlertDelay 1.3.6.1.4.1.11.2.23.20.4.2 integer read-write
Set this variable to non-zero integer value to skip checking the power connection state of Starfish device.