HPN-ICF-SNA-DLSW-EXT-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-SNA-DLSW-EXT-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, DLSW-MIB, INET-ADDRESS-MIB, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfDlswExt 1.3.6.1.4.1.11.2.14.11.15.2.62
The MIB module for management of specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.
       hpnicfDlswExtMIBObjects 1.3.6.1.4.1.11.2.14.11.15.2.62.1
           hpnicfdeNode 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1
               hpnicfdeNodeVendorID 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.1 octet string read-write
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of this DLSw. This information is reported in DLSw Capabilities Exchange.
               hpnicfdeNodeIpAddrType 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.2 inetaddresstype read-write
The type of ip address: IPv4 or IPv6.
               hpnicfdeNodeLocalAddr 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.3 inetaddress read-write
Local peer ip address. This ip address must have been configured for a port on the router. If no local peer ip address is configured, then this object will be the empty string.
               hpnicfdeNodePriority 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.4 integer32 read-write
Peer priority advertised to remote peers in the DLSw Capabilities Exchange. If an end station can reach through more than one peer, the priority of each peer will be considered when a circuit is established. A lower priority indicates that peer will be the preferred choice if there are more than one path to the destination. A value of 65535 indicates the value is meaningless.
               hpnicfdeNodeInitPacingWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.5 integer32 read-write
Initial pacing window size. This is the starting size of the pacing window. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement. A value of 65535 indicates the value is meaningless.
               hpnicfdeNodeMaxPacingWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.6 integer32 read-write
Maximum pacing window size. This is the largest size that the pacing window will grow to. DLSw uses an adaptive pacing flow control algorithm that automatically adjusts to congestion levels in the network. Pacing windows are used to control how many packets may be sent to a peer before acknowlegement.
               hpnicfdeNodeKeepAliveInterval 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.7 integer32 read-write
Default remote peer keepalive interval in seconds. The keepalive parameter refers to how often DLSw peers send peer keep alives to each other. These periodic messages allow DLSw to keep track of the state of all peers. If set to zero, no keepalives are sent. A value of 65535 indicates the value is meaningless.
               hpnicfdeNodePermitDynamic 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.8 integer read-write
To accept connections from non-configured remote peer when permitDynamic is specified. Enumeration: 'forbidDynamic': 2, 'unknown': 65535, 'permitDynamic': 1.
               hpnicfdeNodeConnTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.9 integer32 read-write
Define connected state timer.
               hpnicfdeNodeLocalPendTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.10 integer32 read-write
Define connected state timer.
               hpnicfdeNodeRemotePendTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.11 integer32 read-write
Define connected state timer.
               hpnicfdeNodeSnaCacheTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.12 integer32 read-write
Define connected state timer.
               hpnicfdeNodeExplorerTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.13 integer32 read-write
Define explorer timer.
               hpnicfdeNodeExplorerWaitTimeout 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.14 integer32 read-write
Define explorer waiting timer.
               hpnicfdeNodeConfigSapList 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.15 octet string read-write
The SAP list indicates which SAPs are allowed. Only SAPs with even numbers are represented, in the form of the most significant bit of the first octet representing the SAP 0, the next most significant bit representing the SAP 2, to the least significant bit of the last octet representing the SAP 254. Data link switching is allowed for those SAPs which have one in its corresponding bit, not allowed otherwise. The whole SAP list has to be changed together. Changing the SAP list affects only new circuit establishments and has no effect on established circuits. This list can be used to restrict specific partners from knowing about all the SAPs used by DLSw on all its interfaces (these are represented in hpnicfdeIfSapList for each interface). For instance, one may want to run NetBIOS with some partners but not others. If a node supports sending run-time capabilities exchange messages, changes to this object should cause that action. When to start the run-time capabilities exchange is implementation-specific. The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.
               hpnicfdeNodeMaxTransmission 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.16 integer32 read-write
The maximum retry times for TCP packet. Default value is 5.
               hpnicfdeNodeMulticastStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.17 integer read-write
Multicast support status. It is disabled by default. Enumeration: 'disabled': 2, 'enabled': 1.
               hpnicfdeNodeMulticastAddress 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.18 inetaddress read-write
Multicast address. Default is 224.0.10.0. When the hpnicfdeNodeMulticastStatus is disabled, the multicast address is reset to 0.0.0.0.
               hpnicfdeNodeResetTcpAll 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.19 integer read-write
Reset all TCP circuit switch. Any return value is meaningless. Enumeration: 'reset': 1.
               hpnicfdeNodeStCapTcpNum 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.20 integer32 read-write
Tcp number reported in DLSw Capabilities Exchange.
               hpnicfdeNodeTcpQueueMax 1.3.6.1.4.1.11.2.14.11.15.2.62.1.1.21 integer32 read-write
The max length of TCP queue.
           hpnicfdeTConn 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2
               hpnicfdeTConnConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1 no-access
This table defines the peer transport connections that will be initiated or accepted by this DLSw. This table augments dlswTConnConfigTable.
                   hpnicfdeTConnConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1 no-access
A list of objects that define specific configuration for a DLSw peer transport connection.
                       hpnicfdeTConnConfigVersion 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.1 octet string read-only
This value identifies which version (first octet) and release (second octet) of the DLSw standard is supported by this partner DLSw. This information is obtained from a DLSw Capabilities Exchange message received from the partner DLSw. A string of zero length is returned before a Capabilities Exchange message is received, or if one is never received. A conceptual row with a hpnicfdeTConnOperState of 'connected' but a zero length partner version indicates that the partner is a non-standard DLSw partner. If an implementation chooses to keep hpnicfdeTConnOperEntrys in the 'disconnected' state, this value should remain unchanged.
                       hpnicfdeTConnConfigPriority 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.2 integer32 read-only
The priority for remote peer.
                       hpnicfdeTConnConfigLfSize 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.3 lfsize read-only
The largest frame size.
                       hpnicfdeTConnConfigKeepaliveIntval 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.4 integer32 read-only
The keepalive interval value.
                       hpnicfdeTConnConfigBackup 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.5 integer read-only
The current remote peer is configured as the backup of another configured remote peer. Enumeration: 'yes': 1, 'no': 2.
                       hpnicfdeTConnConfigBackupTAddr 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.6 taddress read-only
It is the ip address of a configured remote peer of which the current remote peer is configrued as backup.
                       hpnicfdeTConnConfigBackupLinger 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.1.1.7 integer32 read-only
Backup peer linger.
               hpnicfdeTConnOperTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2 no-access
A list of peer transport connections. Each connected peer will create a conceptual row in the table. When the peer disconnects, the row will be deleted from the table. This table augments dlswTConnOperTable.
                   hpnicfdeTConnOperEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1 no-access
A list of objects that contain spefific operational information for a DLSw peer transport connection.
                       hpnicfdeTConnOperPeerType 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.1 integer read-only
The current remote peer is configured when the value is 'configured'. Enumeration: 'configured': 1, 'other': 3, 'learningDynamic': 2.
                       hpnicfdeTConnOperVendorID 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.2 octet string read-only
The value identifies the manufacturer's IEEE-assigned Organizationally Unique Identifier (OUI) of remote peer.
                       hpnicfdeTConnOperVersionString 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.3 octet string read-only
Version information of remote peer. The length up to 512 bytes.
                       hpnicfdeTConnOperUpTime 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.4 timeticks read-only
The amount of time (in seconds) since this transport connection last entered the 'connected' state.
                       hpnicfdeTConnOperMulticastAddress 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.5 taddress read-only
When remote peer supports DLSw2.0, this node identifies its multicast address.
                       hpnicfdeTConnOperStCapTcpNumber 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.6 integer32 read-only
Number of tcp supported when capabilities exchanging.
                       hpnicfdeTConnOperRecvPkts 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.7 counter32 read-only
The number of Switch-to-Switch Protocol (SSP) messages received on this tcp transport connection.
                       hpnicfdeTConnOperSendPkts 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.8 counter32 read-only
The number of SSP messages sent on this tcp transport connection.
                       hpnicfdeTConnOperDropPkts 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.2.1.9 counter32 read-only
The number of SSP messages dropped on this tcp transport connection.
               hpnicfdeTConnTcpConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3 no-access
This table defines the TCP transport connections that will be either initiated by or accepted by this DSLw. It augments the entries in dlswTConnConfigTable whose domain is dlswTCPDomain. In other words for each conceptual row in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is dlswTCPDomain, that conceptual row will be augmented by this table. dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain are all imported from DLSW-MIB (RFC 2024). This table augments dlswTConnTcpConfigTable.
                   hpnicfdeTConnTcpConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1 no-access
A list of objects that define specific configuration for a DLSw peer transport connection within the dlswTCPDomain. dlswTCPDomain is imported from DLSW-MIB (RFC 2024).
                       hpnicfdeTConnTcpConfigQueueMax 1.3.6.1.4.1.11.2.14.11.15.2.62.1.2.3.1.1 integer32 read-only
Maximum output TCP queue size for this remote peer. For DLSw over TCP encapsulation, packets may be queued due to congestion of the TCP network. This variable is used to set the output queue maximum of the underlying TCP connection for the peer represented by the conceptual row.
           hpnicfdeBridge 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3
               hpnicfdeBridgeTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1 no-access
A list of bridge group which is serving for DLSw.
                   hpnicfdeBridgeEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1 no-access
A list of bridge information.
                       hpnicfdeBridgeNumIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.1 integer32 no-access
This value identifies the bridge number.
                       hpnicfdeBridgeRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.1.1.2 rowstatus read-only
RowStatus.
               hpnicfdeBridgeIfTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2 no-access
The list of interface on which DLSw is active.
                   hpnicfdeBridgeIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1 no-access
The list of bridge interface information.
                       hpnicfdeBridgeIfBrgGrp 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.1 integer32 read-only
This value identifies the bridge number attached to the interface.
                       hpnicfdeBridgeIfRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.3.2.1.2 rowstatus read-only
RowStatus.
           hpnicfdeQllc 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4
               hpnicfdeQllcTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1 no-access
The table defines attributes related for those QLLC that participate in data link switching.
                   hpnicfdeQllcEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1 no-access
The ifIndex belongs to the interface which link protocol is x.25.
                       hpnicfQllcX121Address 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.1 integer32 read-only
X.121 address.
                       hpnicfQllcLocalMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.2 macaddressnc read-only
The virtual MAC address used to represent the QLLC-attached link station to the rest of the DLSw network.
                       hpnicfQllcLocalSap 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.3 octet string read-only
The SAP used to represent this link station.
                       hpnicfQllcRemoteMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.4 macaddressnc read-only
The MAC address to which DLSw should attempt to connect this link station. If this information is not available, a length of zero for this object should be returned.
                       hpnicfQllcRemoteSap 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.5 octet string read-only
The SAP of the remote station to which this link station should be connected. If this information is not available, a length of zero for this object should be returned.
                       hpnicfQllcRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.4.1.1.6 rowstatus read-only
RowStatus.
           hpnicfdeSdlc 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5
               hpnicfdeSdlcPortTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1 no-access
The table defines parameters for the interfaces whose link protocol is SDLC.
                   hpnicfdeSdlcPortEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1 no-access
Sdlc port entry.
                       hpnicfdeSdlcPortRole 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.1 integer read-only
The SDLC role of interface. Enumeration: 'primary': 1, 'seconday': 2, 'norole': 3.
                       hpnicfdeSdlcPortSendWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.2 integer32 read-only
Size of local send window.
                       hpnicfdeSdlcPortModulo 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.3 integer read-only
Size of modulus. Enumeration: 'm128': 128, 'm8': 8.
                       hpnicfdeSdlcPortMaxPdu 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.4 integer32 read-only
Maximum bytes for incoming frames.
                       hpnicfdeSdlcPortMaxSendQueue 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.5 integer32 read-only
Size of hold queue.
                       hpnicfdeSdlcPortMaxTransmission 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.6 integer32 read-only
Number of times to retry an operation.
                       hpnicfdeSdlcPortSimultaneousEnable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.7 integer read-only
Activate SDLC two-way simultaneous mode. Enumeration: 'disabled': 2, 'enabled': 1.
                       hpnicfdeSdlcPortTimerACK 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.8 integer32 read-only
Time to wait for a reply to a frame.
                       hpnicfdeSdlcPortTimerLifeTime 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.9 integer32 read-only
Time to wait for a reply used by secondary station.
                       hpnicfdeSdlcPortTimerPollPause 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.10 integer32 read-only
Time between polls for each secondary SDLC station.
                       hpnicfdeSdlcPortRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.5.1.1.11 rowstatus read-only
RowStatus.
           hpnicfdeLlc2 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6
               hpnicfdeLlc2PortTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1 no-access
This table defines parameters for the Ethernet interface.
                   hpnicfdeLlc2PortEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1 no-access
LLC2 port entry.
                       hpnicfdeLlc2PortMaxAck 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.1 integer32 read-only
Maximum of I-frames received before ACK.
                       hpnicfdeLlc2PortMaxPdu 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.2 integer32 read-only
Maximum of LLC2 pdu length.
                       hpnicfdeLlc2PortMaxSendQueue 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.3 integer32 read-only
Queue for sending llc2 I-frames.
                       hpnicfdeLlc2PortMaxTransmission 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.4 integer32 read-only
Retry times of operations.
                       hpnicfdeLlc2PortModulo 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.5 integer read-only
Modulus of LLC2. Enumeration: 'm128': 128, 'm8': 8.
                       hpnicfdeLlc2PortReceiveWindow 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.6 integer32 read-only
Maximum number of I-frames to send before received ACK.
                       hpnicfdeLlc2PortTimerAck 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.7 integer32 read-only
Waiting for ACK time after sending an I-frame.
                       hpnicfdeLlc2PortTimerAckDelay 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.8 integer32 read-only
Maximum time allows I-frames incoming without replay ACK.
                       hpnicfdeLlc2PortTimerDetect 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.9 integer32 read-only
Detect the link status.
                       hpnicfdeLlc2PortTimerBusy 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.10 integer32 read-only
Waiting time while other LLC2 station is in busy state.
                       hpnicfdeLlc2PortTimerPoll 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.11 integer32 read-only
Waiting time after a P frame is sent.
                       hpnicfdeLlc2PortTimerReject 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.12 integer32 read-only
Waiting time after a REJ frame is sent.
                       hpnicfdeLlc2PortRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.6.1.1.13 rowstatus read-only
RowStatus.
           hpnicfdeReachableCache 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7
               hpnicfdeRchCacheStat 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1
                   hpnicfdeRchCacheMaxIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.1 integer32 read-only
Maximum of hpnicfdeRchCacheIndex.
                   hpnicfdeRchCacheNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.1.2 integer32 read-only
The next value of hpnicfdeRchCacheIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeRchCacheTable. This makes it possible for the agent to control the index space of the MAC address cache, yet allows the manager to administratively create new rows.
               hpnicfdeRchCacheTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3 no-access
Reachable cache table.
                   hpnicfdeRchCacheEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1 no-access
Reachable cache entry.
                       hpnicfdeRchCacheIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.1 integer32 no-access
Index of reachable cache entry.
                       hpnicfdeRchCacheStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.2 integer read-only
Current status of reachable cache entry. Enumeration: 'found': 1, 'waiting': 5, 'exploring': 4, 'noCacheInfo': 3, 'verify': 2.
                       hpnicfdeRchCacheRemainTime 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.3 timeticks read-only
Remain time of reachable cache entry.
                       hpnicfdeRchCacheMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.4 macaddressnc read-only
MAC address of reachable cache entry.
                       hpnicfdeRchCacheRemoteIpAddrType 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.5 inetaddresstype read-only
Remote peer ip address type.
                       hpnicfdeRchCacheRemoteIp 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.6 inetaddress read-only
Remote peer ip address of reachable cache entry.
                       hpnicfdeRchCacheRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.7.3.1.7 rowstatus read-only
RowStatus.
           hpnicfdeEthernetBackup 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8
               hpnicfdeEBMacMapStat 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1
                   hpnicfdeEBMacMapMaxIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.1 integer32 read-only
Maximum of hpnicfdeEBMacMapIndex.
                   hpnicfdeEBMacMapNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.1.2 integer32 read-only
The next value of hpnicfdeEBMacMapIndex to be assigned by the agent. A retrieval of this object atomically reserves the returned value for use by the manager to create a row in hpnicfdeEBMacMapTable. This makes it possible for the agent to control the index space of the MAC mapping tables, yet allows the manager to administratively create new rows.
               hpnicfdeEBIfTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3 no-access
Information of interface which works for DLSw Ethernet redundancy.
                   hpnicfdeEBIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1 no-access
Parameters defined for DLSw Ethernet redundancy interface.
                       hpnicfdeEBMulticastMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.1 macaddressnc read-only
Multicast MAC address configured for the Ethernet redundancy of dlsw module. When Ethernet redundancy is inactive, its value is '000000000000'H. To active Ethernet redundancy, give it a valid multicast MAC address.
                       hpnicfdeEBPriority 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.2 integer32 read-only
Priority configured for the Ethernet redundancy of DLSw module.
                       hpnicfdeEBtimer 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.3 integer32 read-only
Timer for the Ethernet redundancy of DLSw module.
                       hpnicfdeEBRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.3.1.4 rowstatus read-only
RowStatus.
               hpnicfdeEBMacMapTable 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4 no-access
MAC address mapping table.
                   hpnicfdeEBMacMapEntry 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1 no-access
MAC address mapping entry.
                       hpnicfdeEBMacMapIndex 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.1 integer32 no-access
Index of MAC address mapping entry.
                       hpnicfdeEBMacMapLocalMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.2 macaddressnc read-only
Local MAC address in MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
                       hpnicfdeEBMacMapRemoteMac 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.3 macaddressnc read-only
Remote MAC address of MAC address mapping. When creating a new conceptual row, hpnicfdeEBMacMapLocalMac and hpnicfdeEBMacMapRemoteMac should be set simultaneously.
                       hpnicfdeEBMacMapNeighbour 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.4 macaddressnc read-only
Neighbour of MAC address mapping.
                       hpnicfdeEBMacMapRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.62.1.8.4.1.5 rowstatus read-only
Status of MAC address mapping entry.