HPN-ICF-QINQ-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-QINQ-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfQINQ 1.3.6.1.4.1.11.2.14.11.15.2.69
802.1Q-in-Q MIB
       hpnicfQinQMibObject 1.3.6.1.4.1.11.2.14.11.15.2.69.1
           hpnicfQinQGlobalConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1
               hpnicfQinQBpduTunnelSwitch 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.1 hpnicfqinqswitchstate read-write
The global configuration switch of BPDU 802.1q tunnel. If global configuration is disabled, BPDU tunnel function will be disabled despite of the corresponding configuration of interface. BPDU tunnel function of a certain interface would work only if the global and interface's switch are both enabled.
               hpnicfQinQEthernetTypeValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.2 integer32 read-write
Ethernet protocol type configuring for a global value. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface or VLAN. The node that configure this value for a single interface is hpnicfQinQIfEthernetType, whose priority is higher than hpnicfQinQEthernetTypeValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration. The ethernet protocol type of node hpnicfQinQVidEthernetType that configured for a VLAN has the highest priority.
               hpnicfQinQServiceTPIDValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.3 integer32 read-write
Ethernet protocol type configured for service VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfServiceTPIDValue, whose priority is higher than hpnicfQinQServiceTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration.
               hpnicfQinQCustomerTPIDValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.1.4 integer32 read-write
Ethernet protocol type configured for customer VLAN tags globally. The ethernet protocol type is also the TPID(Tag Protocol Identity) field of a VLAN tag described in 802.1q document. This value can be also configured for an individual interface. The node that configure this value for a single interface is hpnicfQinQIfCustomerTPIDValue, whose priority is higher than hpnicfQinQCustomerTPIDValue. That means, if the value configured for a interface is different from the global value, the switch will select the configuration of the interface and ignore the global configuration.
           hpnicfQinQBpduTunnelTable 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2 no-access
A table for configuring 802.1q BPDU tunnel function for interfaces.
               hpnicfQinQBpduTunnelEntry 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1 no-access
An entry for configuring 802.1q BPDU tunnel function for interfaces.
                   hpnicfQinQProtocolIndex 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.1 integer no-access
The index of protocol on which the BPDU tunnel state will be set. 'bpdu' represents status of BPDU tunnel. 'stp' represents STP tunnel. 'gmosaic' represents GMOSAIC tunnel. 'igmp' represents IGMP tunnel. STP/GMOSAIC/IGMP tunnel will start to work only if BPDU tunnel and STP/GMOSAIC/IGMP tunnel are both enabled. Enumeration: 'gmosaic': 3, 'bpd': 1, 'stp': 2, 'igmp': 4.
                   hpnicfQinQBpduRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.69.1.2.1.2 rowstatus read-only
Operation status of this table entry.
           hpnicfQinQPriorityRemarkTable 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3 no-access
A table for configuring priority field in 802.1Q-in-Q outer VLAN tag for interfaces. This feature uses the priority of an inner VLAN tag to remark the priority of an outer VLAN tag.
               hpnicfQinQPriorityRemarkEntry 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1 no-access
An entry for configuring priority remark function for interfaces.
                   hpnicfQinQPriorityValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.1 integer32 no-access
The priority value in inner VLAN tag. Since the priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.
                   hpnicfQinQPriorityRemarkValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.2 integer32 read-only
The new priority value used to fill outer tag.
                   hpnicfQinQPriorityRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.69.1.3.1.3 rowstatus read-only
Operation status of this table entry.
           hpnicfQinQVidTable 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4 no-access
A table for configuring VLAN ID of the 802.1Q-in-Q interfaces.
               hpnicfQinQVidEntry 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1 no-access
An entry for configuring VLAN ID of the 802.1Q-in-Q interfaces.
                   hpnicfQinQVlanID 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.1 integer32 no-access
VLAN ID
                   hpnicfQinQInboundVidListLow 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.2 octet string read-only
The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 1 to 2048. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
                   hpnicfQinQInboundVidListHigh 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.3 octet string read-only
The inbound VLAN IDs which need 802.1Q-in-Q processing. The VLAN ID range, described by bitmap, is from 2049 to 4094. The length of bitmap is 256 in bytes. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN.
                   hpnicfQinQVidEthernetType 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.4 integer32 read-only
Ethernet protocol type configuring for a VLAN.
                   hpnicfQinQVidRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.69.1.4.1.5 rowstatus read-only
Operation status of this table entry.
           hpnicfQinQVidSwapTable 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5 no-access
A table for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces.
               hpnicfQinQVidSwapEntry 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1 no-access
An entry for configuring 802.1Q-in-Q inner VLAN ID swapping function for interfaces.
                   hpnicfQinQVidSwapOld 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.1 integer32 no-access
The old VLAN ID of original 802.1Q packets.
                   hpnicfQinQVidSwapNew 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.2 integer32 read-only
The new VLAN ID of original 802.1Q packets.
                   hpnicfQinQVidSwapRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.69.1.5.1.3 rowstatus read-only
Operation status of this table entry.
           hpnicfQinQPrioritySwapTable 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6 no-access
A table for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces. Using this function, the priority of inner VLAN tag can be modified.
               hpnicfQinQPrioritySwapEntry 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1 no-access
An entry for configuring 802.1Q-in-Q inner VLAN priority swapping function for interfaces.
                   hpnicfQinQPrioritySwapOld 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.1 integer32 no-access
The old priority of original 802.1Q packets. It is the priority of inner VLAN tag. Since the VLAN priority range is from 0 to 7, yet the index range is from 1 to 8. Thus, the actual priority value equals to the value that subtracts 1 from corresponding index value.
                   hpnicfQinQPrioritySwapNew 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.2 integer32 read-only
The new priority of original 802.1Q packets. It is the priority of inner VLAN tag after swapped.
                   hpnicfQinQPrioritySwapRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.69.1.6.1.3 rowstatus read-only
Operation status of this table entry.
           hpnicfQinQIfConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7 no-access
A table for configuring 802.1Q-in-Q functions for interfaces.
               hpnicfQinQIfConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1 no-access
An entry for configuring 802.1Q-in-Q functions for interfaces.
                   hpnicfQinQIfEthernetType 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.1 integer32 read-only
Ethernet protocol type configuring for an interface.
                   hpnicfQinQIfSwitch 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.2 hpnicfqinqswitchstate read-only
Switch of 802.1Q-in-Q functions configuring for an interface.
                   hpnicfQinQIfRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.3 rowstatus read-only
Operation status of this table entry.
                   hpnicfQinQIfServiceTPIDValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.4 integer32 read-only
Service TPID value configured for an interface.
                   hpnicfQinQIfCustomerTPIDValue 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.5 integer32 read-only
Customer TPID value configured for an interface.
                   hpnicfQinQIfUplinkSwitch 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.6 hpnicfqinqswitchstate read-only
Switch of the uplink 802.1Q-in-Q function for an interface.
                   hpnicfQinQIfDownlinkSwitch 1.3.6.1.4.1.11.2.14.11.15.2.69.1.7.1.7 hpnicfqinqswitchstate read-only
Switch of the downlink 802.1Q-in-Q function for an interface.