HPN-ICF-LSW-DEV-ADM-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-LSW-DEV-ADM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HCNUM-TC, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfLswDeviceAdmin 1.3.6.1.4.1.11.2.14.11.15.8.35.18
The latest baseline.
       hpnicfLswSystemPara 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1
           hpnicfLswSysIpAddr 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.1 ipaddress read-only
System IP address, which is the primary IP address of the VLAN interface that has smallest VLAN ID and is configured IP address.
           hpnicfLswSysIpMask 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.2 ipaddress read-only
Mask of the system IP address.
           hpnicfLswSysCpuRatio 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.3 integer32 read-only
CPU usage of the system in accuracy of 1%, and the range of value is 1 to 100.
           hpnicfLswSysVersion 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.4 displaystring read-only
Information of the system version.
           hpnicfLswSysTime 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.5 dateandtime read-write
System time.
           hpnicfLswSysUNMCastDropEnable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.6 integer read-write
Enable or disable discarding of unknown multicast packet. Enumeration: 'enable': 1, 'disable': 0.
           hpnicfLswSysManagementVlan 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.7 integer32 read-write
System management VLAN.
           hpnicfLswSysVlanRange 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.8 displaystring read-write
System VLAN range, if set VLAN range, must bind mangement IP/Mask.
           hpnicfLswSysManagementIpAddr 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.9 ipaddress read-write
System IP address.
           hpnicfLswSysManagementIpMask 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.10 ipaddress read-write
Mask of the system IP address.
           hpnicfMacAddressCountPort 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.11 integer32 read-only
Supportted MAC address number on port.
           hpnicfMacAddressCountMachine 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.12 integer32 read-only
Supportted MAC address number on machine.
           hpnicfLswSysPhyMemory 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.13 unsigned32 read-only
The memory of physical. For the distributed device, it represents the memory size on the master slot. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
           hpnicfLswSysMemory 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.14 unsigned32 read-only
The memory of system. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
           hpnicfLswSysMemoryUsed 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.15 unsigned32 read-only
The system memory in use. Note that the system memory means the memory can be used by the software platform. For the distributed device, it represents the memory size on the master slot. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
           hpnicfLswSysMemoryRatio 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.16 unsigned32 read-only
The percentage of system memory in use. Note that the system memory means the memory can be used by the software platform. hpnicfLswSysMemoryUsed hpnicfLswSysMemoryRatio = -------------------- hpnicfLswSysMemory For the distributed device, it represents the memory used ratio on the master slot.
           hpnicfLswSysTemperature 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.17 integer32 read-only
The temperature of system. For the distributed device, it represents the temperature on the master slot.
           hpnicfLswSysPhyMemRev 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.18 counterbasedgauge64 read-only
Size of the memory space for the software platform. This node is used to replace hpnicfLswSysPhyMemory. For a distributed device, it indicates the size of the memory space on the active MPU.
           hpnicfLswSysMemRev 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.19 counterbasedgauge64 read-only
Size of the physical memory space. This node is used to replace hpnicfLswSysMemory. For a distributed device, it indicates the size of the memory space on the active MPU.
           hpnicfLswSysMemUsedRev 1.3.6.1.4.1.11.2.14.11.15.8.35.18.1.20 counterbasedgauge64 read-only
Size of the memory space used by the software system. This node is used to replace hpnicfLswSysMemoryUsed. For a distributed device, it indicates the size of the memory space on the active MPU
       hpnicfLswSlotConf 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4
           hpnicfLswFrameTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2 no-access
Frame information table.
               hpnicfLswFrameEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1 no-access
Frame description table entry.
                   hpnicfLswFrameIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.1 integer32 read-only
The unique index of frame.
                   hpnicfLswFrameType 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.2 integer32 read-only
Frame type.
                   hpnicfLswFrameDesc 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.3 displaystring read-write
Frame description.
                   hpnicfLswSlotNumber 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.4 integer32 read-only
Number of slots of the current frame.
                   hpnicfLswFrameAdminStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.2.1.5 integer read-only
The Status of frame. Enumeration: 'fault': 2, 'other': 3, 'normal': 1.
           hpnicfLswSlotTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3 no-access
Slot description table.
               hpnicfLswSlotEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1 no-access
Slot description table entry.
                   hpnicfLswSlotIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.1 integer32 read-only
Slot index. When the slot is empty, listed as vacant slot.
                   hpnicfLswSlotType 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.2 hpnicflswtypeofslot read-only
Slot type. BOM number is recommended.
                   hpnicfLswSlotDesc 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.3 displaystring read-write
Slot description.
                   hpnicfLswSlotCpuRatio 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.4 integer32 read-only
CPU usage of the slot in accuracy of 1%, and the range of value is 1 to 100.
                   hpnicfLswSlotPcbVersion 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.5 displaystring read-only
Hardware version of the board.
                   hpnicfLswSlotSoftwareVersion 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.6 displaystring read-only
Software version of the board.
                   hpnicfLswSubslotNumber 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.7 integer32 read-only
Number of the cards of the board.
                   hpnicfLswSlotAdminStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.8 integer read-only
Slot status. Enumeration: 'fault': 3, 'forbidden': 4, 'not-install': 1, 'normal': 2.
                   hpnicfLswSlotOperStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.9 integer read-write
Slot operation status. Enumeration: 'reset': 3, 'test': 4, 'enable': 2, 'disable': 1.
                   hpnicfLswSlotPhyMemory 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.10 unsigned32 read-only
The memory of physical on the board. If the amount of physical memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
                   hpnicfLswSlotMemory 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.11 unsigned32 read-only
The memory of system on the board. Note that the system memory means the memory can be used by the software platform. If the amount of system memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
                   hpnicfLswSlotMemoryUsed 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.12 unsigned32 read-only
The system memory in use on the board. Note that the system memory means the memory can be used by the software platform. If the amount of used memory exceeds 4,294,967,295 bytes, the value remains 4,294,967,295 bytes.
                   hpnicfLswSlotMemoryRatio 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.13 unsigned32 read-only
The percentage of system memory in use on the board. Note that the system memory means the memory can be used by the software platform.
                   hpnicfLswSlotTemperature 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.14 integer32 read-only
The temperature of system on the board.
                   hpnicfLswSlotPktBufFree 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.15 integer32 read-only
The number of packet buffers available for internal VME transfers or external transfers, respectively. Because switch operations and application software modules impose some overhead on global memory buffers, the number of buffers available for data transfers is less than the total number of buffers allocated when the switch boots.
                   hpnicfLswSlotPktBufInit 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.16 integer32 read-only
The number of packet buffers allocated when the switch booted.
                   hpnicfLswSlotPktBufMin 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.17 integer32 read-only
The smallest number of packet buffers available since the switch booted.
                   hpnicfLswSlotPktBufMiss 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.18 counter64 read-only
The number of times that the switch was unable to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.
                   hpnicfLswSlotRunTime 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.19 displaystring read-only
Runtime of board. For example, if a board has run for 2 days 4 hours and 20 minutes, its runtime is displayed as 0 weeks, 2 days, 4 hours, 20 minutes.
                   hpnicfLswSlotPhyMemRev 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.20 counterbasedgauge64 read-only
Size of the memory on the board. This node is used to replace hpnicfLswSlotPhyMemory.
                   hpnicfLswSlotMemRev 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.21 counterbasedgauge64 read-only
Size of the memory space for the software system on the board. This node is used to replace hpnicfLswSlotMemory. Note that the system memory means the memory can be used by the software platform.
                   hpnicfLswSlotMemUsedRev 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.22 counterbasedgauge64 read-only
Size of the memory space used by the software system on the board. This node is used to replace hpnicfLswSlotMemoryUsed. Note that the system memory means the memory can be used by the software platform.
                   hpnicfLswSlotModelDesc 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.3.1.23 displaystring read-only
Model of the extended device in a slot. Examples of extended devices include PEXs and firewall modules. If the device in the slot is not an extended device, a zero-length string is returned.
           hpnicfLswSubslotTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4 no-access
Subslot description table.
               hpnicfLswSubslotEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1 no-access
Subslot description table entry.
                   hpnicfLswSubslotIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.1 integer32 read-only
Subslot index.
                   hpnicfLswSubslotType 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.2 hpnicflswtypeofslot read-only
Type of the pinch board in the subslot.
                   hpnicfLswSubslotPortNum 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.3 integer32 read-only
Number of physical ports in the pinch board.
                   hpnicfLswSubslotAdminStatus 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.4 integer read-only
Status of the pinch board in the subslot. Enumeration: 'fault': 3, 'forbidden': 4, 'not-install': 1, 'normal': 2.
                   hpnicfLswSubslotFirstIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.4.1.5 integer32 read-only
The value of ifIndex of the first physical port in the pinch board.
           hpnicfLswPortTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5 no-access
Port configuration table.
               hpnicfLswPortEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1 no-access
Port configuration table entry.
                   hpnicfLswPortIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.1 integer32 read-only
The port number on the device. The first port number is 1, which is reserved if the port does not exist.
                   hpnicfLswPortType 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.2 integer read-only
Normally the port type is the same as its card type. When there are different types of ports in one card, use the actual port type. Enumeration: 'type-STACK': 10, 'type-100-1000-BASE-LX-SMF': 183, 'type-SFP-8GFC-SW': 228, 'type-RPR-PHYPOS-CONNECTOR': 144, 'type-1000BASE-STK-SFP': 171, 'type-XFP-10GBASE-LR': 76, 'type-MINISAS-HD-STACK-CONNECTOR': 199, 'type-10G-BASE-ER': 61, 'type-XFP-10GBASE-LW': 79, 'type-SFP-PLUS-10GBASE-SR': 192, 'type-10G-SW-MM-LC': 70, 'type-XFP-10GBASE-LX4': 82, 'type-10OR100M-db': 14, 'type-QSFP-PLUS-40GBASE-SR4': 205, 'type-OLT-1000BASE-BX-SFF-SC': 98, 'type-POS-L-64-3': 135, 'type-100M-MM-FX-SC': 23, 'type-SFP-PLUS-10GBASE-LRM': 194, 'type-POS-OC12-IR-2-SM': 112, 'type-622-ATM-NO-CONNECTOR': 156, 'type-QSFP-PLUS-ACTIVE-STACK-CONNECTOR': 231, 'type-GBIC-1000-BASE-LX': 28, 'type-1000BASE-MM-SFP': 51, 'type-1000BASE-LONG-FX': 12, 'type-POS-OC3-LR-2-SM': 107, 'type-10G-LW-SM-LC': 69, 'type-100BASE-FX-BIDI': 138, 'type-POS-OC3-SR-MM': 101, 'type-XFP-10GBASE-ER': 77, 'type-QSFP-PLUS-STACK-CONNECTOR': 206, 'type-1000BASE-CWDM-SFP': 173, 'type-100BASE-MM-MTRJ': 73, 'type-XFP-10GBASE-EW': 80, 'type-10GBase-T': 210, 'type-SFP-NO-CONNECTOR': 57, 'type-10G-SR-MM-LC': 67, 'type-POS-L-64-1': 133, 'type-1000BASE-BIDI-SFP': 172, 'type-SFP-STACK-CONNECTOR': 208, 'type-ADSL': 13, 'type-POS-OC12-IR-1-SM': 111, 'type-10G-BASE-SW': 63, 'type-POS-OC48-IR-SM-LC': 95, 'type-10G-BASE-EW': 65, 'type-GBIC-1000-BASE-ZX': 30, 'type-10G-BASE-LW': 64, 'type-1000BASE-BX10-D-SFP': 142, 'type-100BASE-LX-SFP': 53, 'type-POS-OC12-LR-1-SM': 114, 'type-SFP-PLUS-UNKNOWN': 196, 'type-1000BASE-T-AN-SFP': 46, 'type-GBIC-1000-BASE-T': 27, 'type-GBIC-NO-CONNECTOR': 26, 'type-1000BASE-SX-MM': 3, 'type-155-POS-SX-MMF': 41, 'type-XFP-10GBASE-CX4': 81, 'type-SFP-1000BASE-BIDI': 225, 'type-155-CPOS-T1-LX-SMF': 164, 'type-T1-CONNECTOR': 170, 'type-10GBASE-ZR': 148, 'type-10GBASE-LX4-SM': 17, 'type-1000BASE-ZENITH-FX-LC': 20, 'type-POS-V-64-3': 137, 'type-POS-V-64-2': 136, 'type-RPR-LOGICGE-CONNECTOR': 178, 'type-POS-OC48-LR-1-SM': 122, 'type-POS-OC48-LR-SM-LC': 96, 'type-POS-OC3-IR-1-SM': 103, 'type-POS-S-64-2': 130, 'type-100M-MULTIMODE-FX': 6, 'type-POS-S-64-3': 131, 'type-POS-OC12-LR-SM': 113, 'type-COMBO-1000-BASE-LX-COPPER': 34, 'type-POS-OC12-LR-2-SM': 115, 'type-WLAN-RADIO': 189, 'type-QSFP-PLUS-40GBASE-CSR4': 223, 'type-10GBASE-CX4': 49, 'type-622-CPOS-E1-LX-SMF': 167, 'type-POS-I-64-2': 126, 'type-POS-I-64-3': 127, 'type-POS-I-64-1': 125, 'type-POS-I-64-5': 128, 'type-100M-SM-FX-SC': 22, 'type-10G-BASE-SR': 60, 'type-POS-OC3-IR-SM': 102, 'type-622-ATM-LX-SMF': 154, 'type-622-ATM-SX-MMF': 153, 'type-POS-OC12-IR-SM': 110, 'type-POS-OC48-SR-SM-LC': 94, 'type-POS-OC48-LR-2-SM': 123, 'type-COMBO-1000-BASE-ZX': 38, 'type-10G-STACK': 150, 'type-10G-BASE-LX4': 62, 'type-COMBO-NO-CONNECTOR': 31, 'type-QSFP-PLUS-TO-4SFP-PLUS-ACTIVE-STACK-CONNECTOR': 232, 'type-1000BASE-ZX-SFP': 50, 'type-CFP-100GBASE-LR4': 216, 'type-COMBO-1000-BASE-SX-FIBER': 36, 'type-SFP-PLUS-NO-CONNECTOR': 191, 'type-SFP-PLUS-10GBASE-ER': 202, 'type-POS-OC48-LR-SM': 121, 'type-COMBO-1000-BASE-ZX-COPPER': 40, 'type-1000BASE-TX': 4, 'type-10GBASE-LX4-MM': 16, 'type-RPR-PHY10GE-CONNECTOR': 145, 'type-RPR-LOGICOC48-CONNECTOR': 182, 'type-SFP-8GFC-LW': 229, 'type-POS-OC48-IR-SM': 118, 'type-NULL': 0, 'type-100M-1310-BIDI': 180, 'type-SFP-PLUS-10GBASE-ZR-DWDM': 226, 'type-SGMII-100-BASE-FX-SFP': 188, 'type-COMBO-1000-BASE-SX': 35, 'type-POS-OC48-SR-SM': 117, 'type-1000BASE-T': 43, 'type-155-ATM-SX-MMF': 151, 'type-XPK-UNKNOWN': 93, 'type-RPR-LOGICPOS-CONNECTOR': 146, 'type-155-CPOS-E1-SX-MMF': 161, 'type-COMBO-1000-BASE-ZX-FIBER': 39, 'type-100BASE-MM-SFP': 56, 'type-QSFP-PLUS-UNKNOWN': 221, 'type-10GBASE-LR-XENPAK': 48, 'type-XPK-10GBASE-ZR': 186, 'type-100M-SINGLEMODE-FX': 5, 'type-10G-LR-SM-LC': 66, 'type-155-CPOS-E1-LX-SMF': 163, 'type-RPR-PHYOC48-CONNECTOR': 181, 'type-100BASE-T-AN-SFP': 54, 'type-POS-OC48-IR-2-SM': 120, 'type-100M-SM-FX-LC': 24, 'type-10OR100M': 1, 'type-SFP-UNKNOWN-CONNECTOR': 58, 'type-E1-CONNECTOR': 169, 'type-CFP-40GBASE-ER4': 224, 'type-QSFP-PLUS-40GBASE-PSM': 227, 'type-ONU-1000BASE-BX-SFF-SC': 99, 'type-CXP-100GBASE-SR10': 218, 'type-POS-OC3-IR-2-SM': 104, 'type-TYPE-ERROR-CONNECTOR': 149, 'type-VDSL': 9, 'type-POS-OC12-LR-3-SM': 116, 'type-SFP-PLUS-STACK-CONNECTOR': 197, 'type-STK-1000BASE-T': 143, 'type-155-CPOS-E1-NO-CONNECTOR': 157, 'type-COMBO-1000-BASE-LX-FIBER': 33, 'type-CFP-NO-CONNECTOR': 211, 'type-100BASE-SX-SFP': 52, 'type-RS485': 201, 'type-CXP-100GBASE-AOC': 230, 'type-CFP-40GBASE-SR4': 215, 'type-622-CPOS-E1-SX-MMF': 165, 'type-155-CPOS-T1-NO-CONNECTOR': 158, 'type-POS-S-64-5': 132, 'type-XPK-10GBASE-SR': 85, 'type-POS-S-64-1': 129, 'type-XPK-10GBASE-SW': 88, 'type-1000BASE-LONG-FX-LC': 21, 'type-CXP-NO-CONNECTOR': 219, 'type-10G-ER-SM-LC': 68, 'type-CFP-40GBASE-LR4': 212, 'type-POS-OC3-LR-3-SM': 108, 'type-100BASE-BX10-U-SFP': 139, 'type-RPR-PHYGE-CONNECTOR': 177, 'type-100BASE-SM-MTRJ': 72, 'type-XPK-10GBASE-ER': 87, 'type-1000BASE-BX10-U-SFP': 141, 'type-XPK-10GBASE-EW': 90, 'type-10GBASE-LX4-XENPAK': 47, 'type-SGMII-100-BASE-LX-SFP': 187, 'type-100M-HUB': 8, 'type-XFP-10GBASE-SW': 78, 'type-OLT-1000BASE-NO-CONNECTOR': 176, 'type-XFP-10GBASE-SR': 75, 'type-TRANSCEIVER-UNKNOWN': 220, 'type-100M-100BASE-TX': 7, 'type-622-CPOS-T1-SX-MMF': 166, 'type-GBIC-1000-BASE-SX': 29, 'type-622-CPOS-T1-LX-SMF': 168, 'type-COMBO-1000-BASE-LX': 32, 'type-XPK-10GBASE-CX4': 91, 'type-POS-L-64-4': 198, 'type-155-CPOS-T1-SX-MMF': 162, 'type-OLT-1000BASE-PX-SFP': 175, 'type-100M-LONG-FX': 18, 'type-1000BASE-ZENITH-FX': 11, 'type-POS-L-64-2': 134, 'type-622-CPOS-T1-NO-CONNECTOR': 160, 'type-POS-OC3-LR-SM': 105, 'type-XPK-10GBASE-LR': 86, 'type-100M-1550-BIDI': 179, 'type-CFP-100GBASE-SR10': 217, 'type-XPK-10GBASE-LW': 89, 'type-ONU-1000BASE-PX-SFF': 200, 'type-POS-OC12-SR-MM': 109, 'type-POS-OC48-LR-3-SM': 124, 'type-QSFP-NO-CONNECTOR': 209, 'type-1000BASE-SX-SFP': 44, 'type-10GBASE-LR-SM': 15, 'type-155-POS-LX-SMF': 42, 'type-155-ATM-LX-SMF': 152, 'type-1000BASE-CX': 19, 'type-POS-NO-CONNECTOR': 59, 'type-100BASE-BX10-D-SFP': 140, 'type-100M-MM-FX-LC': 25, 'type-XFP-NO-CONNECTOR': 74, 'type-10G-EW-SM-LC': 71, 'type-10G-ZR-SM-LC': 185, 'type-XFP-UNKNOWN': 83, 'type-QSFP-PLUS-TO-4SFP-PLUS-STACK-CONNECTOR': 207, 'type-10G-BASE-CX4': 97, 'type-SFP-PLUS-10GBASE-C': 195, 'type-RPR-LOGIC10GE-CONNECTOR': 147, 'type-SFP-PLUS-10GBASE-LR': 193, 'type-COMBO-1000-BASE-SX-COPPER': 37, 'type-XPK-10GBASE-LX4': 92, 'type-155-ATM-NO-CONNECTOR': 155, 'type-CFP-UNKNOWN': 222, 'type-QSFP-PLUS-40GBASE-LR4': 214, 'type-SFP-PLUS-10GBASE-ZR': 203, 'type-XFP-10GBASE-ZR': 204, 'type-POS-OC3-LR-1-SM': 106, 'type-10G-ZW-SM-LC': 184, 'type-1000BASE-LX-SM': 2, 'type-100BASE-ZX-SFP': 55, 'type-622-CPOS-E1-NO-CONNECTOR': 159, 'type-XPK-NOCONNECTOR': 84, 'type-24G-CASCADE': 100, 'type-QSFP-PLUS-NO-CONNECTOR': 213, 'type-100BASE-BIDI-SFP': 174, 'type-1000BASE-LX-SFP': 45, 'type-POS-OC48-IR-1-SM': 119.
                   hpnicfLswPortIfindex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.3 integer32 read-only
The value of ifIndex of the port.
                   hpnicfLswPortIsPlugged 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.5.1.4 integer read-only
Port is plugged or not. Enumeration: 'unplugged': 0, 'plugged': 1.
           hpnicfLswPortLoopbackTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6 no-access
Port loopback test table.
               hpnicfLswPortLoopbackEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1 no-access
Port loopback test table entry.
                   hpnicfLswPortLoopbackIsSupport 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.1 integer read-only
The loopback type can be supported by current port. Enumeration: 'both': 2, 'neither': 1, 'internalOnly': 3, 'externalOnly': 4.
                   hpnicfLswPortLoopbackOperate 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.2 integer read-write
Port loopback operate type. Read operation not supported. Enumeration: 'stopRemoteOrLocalLoopBack': 0, 'internalLoopback': 1, 'remoteLoopback': 3, 'externalLoopback': 2, 'localLoopback': 4.
                   hpnicfLswPortLoopbackResult 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.3 integer read-only
Loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. Enumeration: 'testfailed': 2, 'testing': 0, 'testok': 1.
                   hpnicfLswPortLoopbackAutoStopSupport 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.4 integer read-only
Whether this port support NEED-MANNUL-NOLOOP mode or not. Enumeration: 'support': 1, 'notSupport': 2.
                   hpnicfLswPortLoopbackRemoteResult 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.5 integer read-write
The remote loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. Enumeration: 'loopbackTestInit': 0, 'loopbackTestFailed': 3, 'loopbackTestTestAndFailed': 4, 'loopbackTestSuccessed': 2, 'loopbackTesting': 1.
                   hpnicfLswPortLoopbackLocalResult 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.6 integer read-write
The local loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. Enumeration: 'loopbackTestInit': 0, 'loopbackTestFailed': 3, 'loopbackTestTestAndFailed': 4, 'loopbackTestSuccessed': 2, 'loopbackTesting': 1.
                   hpnicfLswPortLoopbackInternalResult 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.7 integer read-write
The internal loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. Enumeration: 'loopbackTestInit': 0, 'loopbackTestFailed': 3, 'loopbackTestTestAndFailed': 4, 'loopbackTestSuccessed': 2, 'loopbackTesting': 1.
                   hpnicfLswPortLoopbackExternalResult 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.6.1.8 integer read-write
The external loopback test result of the port, used for checking if the test is successful. Only after the testing will the query value on the node make sense. Enumeration: 'loopbackTestInit': 0, 'loopbackTestFailed': 3, 'loopbackTestTestAndFailed': 4, 'loopbackTestSuccessed': 2, 'loopbackTesting': 1.
           hpnicfLswFabricTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7 no-access
This table contains the information of fabric.
               hpnicfLswFabricEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1 no-access
An entry in hpnicfLswFabricTable.
                   hpnicfLswFabricChannelIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.1 integer32 no-access
The channel number of fabric.
                   hpnicfLswFabricUtilIn 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.2 integer32 read-only
Ingress utilization of fabric.
                   hpnicfLswFabricUtilOut 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.3 integer32 read-only
Egress utilization of fabric.
                   hpnicfLswFabricPeakIn 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.4 integer32 read-only
Ingress peak of utilization for fabric.
                   hpnicfLswFabricPeakInTime 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.5 dateandtime read-only
Ingress peak time of utilization for fabric.
                   hpnicfLswFabricPeakOut 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.6 integer32 read-only
Egress peak of utilization for fabric.
                   hpnicfLswFabricPeakOutTime 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.7.1.7 dateandtime read-only
Egress peak time of utilization for fabric.
           hpnicfLswNetworkHealthMonitor 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.8
           hpnicfLswExtendModelTable 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9 no-access
This table contains the extended device models supported by the device. Examples of extended devices include PEXs and firewall modules.
               hpnicfLswExtendModelEntry 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1 no-access
This entry contains information about an extended device model.
                   hpnicfLswExtendModelIndex 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.1 integer32 no-access
Index of the extended device model.
                   hpnicfLswExtendModelDesc 1.3.6.1.4.1.11.2.14.11.15.8.35.18.4.9.1.2 displaystring read-only
Extended device model. Examples of extended devices include PEXs and firewall modules.