HPN-ICF-IFQOS2-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-IFQOS2-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfQos2 1.3.6.1.4.1.11.2.14.11.15.2.65
       hpnicfIfQos2 1.3.6.1.4.1.11.2.14.11.15.2.65.1
Interface QoS management information base.
           hpnicfIfQoSHardwareQueueObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1
               hpnicfIfQoSHardwareQueueConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1
                   hpnicfIfQoSQSModeTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1 no-access
A table of queue schedule mode information.
                       hpnicfIfQoSQSModeEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1 no-access
Queue schedule mode information entry.
                           hpnicfIfQoSQSMode 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.1.1.1 integer read-write
The mode of schedule. Enumeration: 'byteCountWfq': 9, 'hpnicffq': 6, 'gmb': 10, 'sp0': 2, 'sp1': 3, 'sp2': 4, 'sp': 1, 'wrr': 5, 'wrr-sp': 7, 'byteCountWrr': 8.
                   hpnicfIfQoSQSWeightTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2 no-access
A table of queue schedule weight configuration information.
                       hpnicfIfQoSQSWeightEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1 no-access
Queue schedule weight configuration information entry.
                           hpnicfIfQoSQueueID 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.1 integer32 no-access
Queue ID
                           hpnicfIfQoSQueueGroupType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.2 integer read-write
Group type of WRR and WFQ. Enumeration: 'group1': 2, 'group0': 1, 'group2': 3.
                           hpnicfIfQoSQSType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.3 integer read-write
Schedule type. Enumeration: 'byte-count': 2, 'weight': 1.
                           hpnicfIfQoSQSValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.4 integer32 read-write
Schedule value.
                           hpnicfIfQoSQSMaxDelay 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.5 integer32 read-write
Max delay.
                           hpnicfIfQoSQSMinBandwidth 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.6 integer32 read-write
Min bandwidth. Unit: kbps.
                           hpnicfIfQoSQSMinBandwidthPercent 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.1.2.1.7 unsigned32 read-write
Percent of min bandwidth. Unit: %. The value is 255 when the schedule mode of the queue is strict queuing.
               hpnicfIfQoSHardwareQueueRunInfoGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2
                   hpnicfIfQoSHardwareQueueRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1 no-access
A table of queue statistic information.
                       hpnicfIfQoSHardwareQueueRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1 no-access
Queue statistic information entry.
                           hpnicfIfQoSPassPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.1 counter64 read-only
The number of forwarded packets.
                           hpnicfIfQoSDropPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.2 counter64 read-only
The number of dropped packets.
                           hpnicfIfQoSPassBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.3 counter64 read-only
The bytes of forwarded packets.
                           hpnicfIfQoSPassPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.4 unsigned32 read-only
The PPS of forwarded packets. PPS: packets per second.
                           hpnicfIfQoSPassBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.5 unsigned32 read-only
The BPS of forwarded packets. BPS: bytes per second.
                           hpnicfIfQoSDropBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.6 counter64 read-only
The bytes of dropped packets.
                           hpnicfIfQoSQueueLengthInPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.7 unsigned32 read-only
The max number of packets which the queue can hold.
                           hpnicfIfQoSQueueLengthInBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.8 unsigned32 read-only
The max bytes of packets which the queue can hold.
                           hpnicfIfQoSCurQueuePkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.9 unsigned32 read-only
The number of packets in the current queue.
                           hpnicfIfQoSCurQueueBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.10 unsigned32 read-only
The bytes of packets in the current queue.
                           hpnicfIfQoSCurQueuePPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.11 unsigned32 read-only
The PPS of packets in the current queue.
                           hpnicfIfQoSCurQueueBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.12 unsigned32 read-only
The BPS of packets in the current queue.
                           hpnicfIfQoSTailDropPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.13 counter64 read-only
The number of packets dropped by tail dropping.
                           hpnicfIfQoSTailDropBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.14 counter64 read-only
The bytes of packets dropped by tail dropping.
                           hpnicfIfQoSTailDropPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.15 unsigned32 read-only
The PPS of packets dropped by tail dropping.
                           hpnicfIfQoSTailDropBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.16 unsigned32 read-only
The BPS of packets dropped by tail dropping.
                           hpnicfIfQoSWredDropPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.17 counter64 read-only
The number of packets dropped by WRED.
                           hpnicfIfQoSWredDropBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.18 counter64 read-only
The bytes of packets dropped by WRED.
                           hpnicfIfQoSWredDropPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.19 unsigned32 read-only
The PPS of packets dropped by WRED.
                           hpnicfIfQoSWredDropBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.1.1.20 unsigned32 read-only
The BPS of packets dropped by WRED.
                   hpnicfIfQoSHQueueTcpRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2 no-access
A table of queue statistic information about TCP and non-TCP packets.
                       hpnicfIfQoSHQueueTcpRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1 no-access
Queue statistic information entry about TCP and non-TCP packets.
                           hpnicfIfQoSWredDropLPreNTcpPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.1 counter64 read-only
The number of low-precedence non-TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropLPreNTcpBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.2 counter64 read-only
The bytes of low-precedence non-TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropLPreNTcpPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.3 unsigned32 read-only
The PPS of low-precedence non-TCP packets dropped by WRED. PPS: packets per second.
                           hpnicfIfQoSWredDropLPreNTcpBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.4 unsigned32 read-only
The BPS of low-precedence non-TCP packets dropped by WRED. BPS: bytes per second.
                           hpnicfIfQoSWredDropLPreTcpPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.5 counter64 read-only
The number of low-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropLPreTcpBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.6 counter64 read-only
The bytes of low-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropLPreTcpPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.7 unsigned32 read-only
The PPS of low-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropLPreTcpBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.8 unsigned32 read-only
The BPS of low-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreNTcpPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.9 counter64 read-only
The number of high-precedence non-TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreNTcpBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.10 counter64 read-only
The bytes of high-precedence non-TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreNTcpPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.11 unsigned32 read-only
The PPS of high-precedence non-TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreNTcpBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.12 unsigned32 read-only
The BPS of high-precedence non-TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreTcpPkts 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.13 counter64 read-only
The number of high-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreTcpBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.14 counter64 read-only
The bytes of high-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreTcpPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.15 unsigned32 read-only
The PPS of high-precedence TCP packets dropped by WRED.
                           hpnicfIfQoSWredDropHPreTcpBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.1.2.2.1.16 unsigned32 read-only
The BPS of high-precedence TCP packets dropped by WRED.
           hpnicfIfQoSSoftwareQueueObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2
               hpnicfIfQoSFIFOObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1
                   hpnicfIfQoSFIFOConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1 no-access
A table of FIFO queue information.
                       hpnicfIfQoSFIFOConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1 no-access
FIFO queue information entry.
                           hpnicfIfQoSFIFOMaxQueueLen 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.1.1.1 integer32 read-write
The maximum length of FIFO queue.
                   hpnicfIfQoSFIFORunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2 no-access
A table of FIFO queue statistic information.
                       hpnicfIfQoSFIFORunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1 no-access
FIFO queue statistic information entry.
                           hpnicfIfQoSFIFOSize 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.1 integer32 read-only
The number of packet in FIFO queue.
                           hpnicfIfQoSFIFODiscardPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.1.2.1.2 counter64 read-only
The number of discard packet.
               hpnicfIfQoSPQObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2
                   hpnicfIfQoSPQConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1
                       hpnicfIfQoSPQDefaultTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1 no-access
A table of priority queue default configuration information.
                           hpnicfIfQoSPQDefaultEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1 no-access
Priority queue default configuration information entry.
                               hpnicfIfQoSPQListNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.1 integer32 no-access
Priority queue list number.
                               hpnicfIfQoSPQDefaultQueueType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.1.1.2 priorityqueue read-write
Specify priority queue that packets put into by default.
                       hpnicfIfQoSPQQueueLengthTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2 no-access
A table of queue length of priority queue configuration information.
                           hpnicfIfQoSPQQueueLengthEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1 no-access
Queue length of priority queue configuration information entry.
                               hpnicfIfQoSPQQueueLengthType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.1 priorityqueue no-access
Type of priority queue.
                               hpnicfIfQoSPQQueueLengthValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.2.1.2 integer32 read-write
The size of priority queue.
                       hpnicfIfQoSPQClassRuleTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3 no-access
A table of class rule of priority queue information.
                           hpnicfIfQoSPQClassRuleEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1 no-access
A table of class rule of priority queue information.
                               hpnicfIfQoSPQClassRuleType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.1 integer no-access
Type of class rule. 'ipall' means all ip packets. Enumeration: 'udp': 8, 'less-than': 6, 'ipv6acl': 3, 'mpls': 10, 'ipall': 9, 'greater-than': 5, 'ipv4acl': 2, 'tcp': 7, 'interface': 1, 'fragments': 4.
                               hpnicfIfQoSPQClassRuleValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.2 integer32 no-access
Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..3999, 10000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0
                               hpnicfIfQoSPQClassRuleQueueType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.3 priorityqueue read-only
Specify the queue for matched packets.
                               hpnicfIfQoSPQClassRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.3.1.4 rowstatus read-only
RowStatus.
                       hpnicfIfQoSPQApplyTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4 no-access
A table of priority queue instance.
                           hpnicfIfQoSPQApplyEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1 no-access
Priority queue instance information.
                               hpnicfIfQoSPQApplyListNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.1 integer32 read-only
Priority queue list number.
                               hpnicfIfQoSPQApplyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.1.4.1.2 rowstatus read-only
RowStatus.
                   hpnicfIfQoSPQRunInfoGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2
                       hpnicfIfQoSPQRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1 no-access
A table of priority queue statistic information.
                           hpnicfIfQoSPQRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1 no-access
Priority queue statistic information entry.
                               hpnicfIfQoSPQType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.1 priorityqueue no-access
The type of priority queue.
                               hpnicfIfQoSPQSize 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.2 integer32 read-only
The number of packets in the priority queue.
                               hpnicfIfQoSPQLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.3 integer32 read-only
The maximum length of priority queue.
                               hpnicfIfQoSPQDiscardPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.2.2.1.1.4 counter64 read-only
The packet number of priority queue discard.
               hpnicfIfQoSCQObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3
                   hpnicfIfQoSCQConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1
                       hpnicfIfQoSCQDefaultTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1 no-access
A table of custom queue default configuration information.
                           hpnicfIfQoSCQDefaultEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1 no-access
Custom queue default configuration information entry.
                               hpnicfIfQoSCQListNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.1 integer32 no-access
Custom queue list number.
                               hpnicfIfQoSCQDefaultQueueID 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.1.1.2 integer32 read-write
Default queue ID.
                       hpnicfIfQoSCQQueueLengthTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2 no-access
A table of queue length of custom queue configuration information.
                           hpnicfIfQoSCQQueueLengthEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1 no-access
Queue length of custom queue configuration information entry.
                               hpnicfIfQoSCQQueueID 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.1 integer32 no-access
Custom queue index.
                               hpnicfIfQoSCQQueueLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.2 integer32 read-write
The size of custom queue.
                               hpnicfIfQoSCQQueueServing 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.2.1.3 integer32 read-write
The maximum bytes that the specified queue can transmit in each turn.
                       hpnicfIfQoSCQClassRuleTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3 no-access
A table of class rule of custom queue information.
                           hpnicfIfQoSCQClassRuleEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1 no-access
A table of class rule of custom queue information.
                               hpnicfIfQoSCQClassRuleType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.1 integer no-access
Type of class rule. 'ipall' means all ip packets. Enumeration: 'udp': 8, 'less-than': 6, 'ipv6acl': 3, 'mpls': 10, 'ipall': 9, 'greater-than': 5, 'ipv4acl': 2, 'tcp': 7, 'interface': 1, 'fragments': 4.
                               hpnicfIfQoSCQClassRuleValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.2 integer32 no-access
Value of class rule. interface : ifIndex ipv4acl : 2000..3999 ipv6acl : 2000..42767 greater-than : 0..65535 less-than : 0..65535 tcp : 0..65535 udp : 0..65535 mpls(exp-mask) : 1..255 other types: 0.
                               hpnicfIfQoSCQClassRuleQueueID 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.3 integer32 read-only
Specify the queue for matched packets.
                               hpnicfIfQoSCQClassRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.3.1.4 rowstatus read-only
RowStatus.
                       hpnicfIfQoSCQApplyTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4 no-access
A table of custom queue instance.
                           hpnicfIfQoSCQApplyEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1 no-access
Custom queue instance information.
                               hpnicfIfQoSCQApplyListNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.1 integer32 read-only
Custom queue list number.
                               hpnicfIfQoSCQApplyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.1.4.1.2 rowstatus read-only
RowStatus.
                   hpnicfIfQoSCQRunInfoGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2
                       hpnicfIfQoSCQRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1 no-access
A table of custom queue statistic information.
                           hpnicfIfQoSCQRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1 no-access
Custom queue statistic information entry.
                               hpnicfIfQoSCQRunInfoSize 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.1 integer32 read-only
The number of packets in the custom queue.
                               hpnicfIfQoSCQRunInfoLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.2 integer32 read-only
The maximum length of custom queue.
                               hpnicfIfQoSCQRunInfoDiscardPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.3.2.1.1.3 counter64 read-only
The packet number of custom queue discard.
               hpnicfIfQoSWFQObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4
                   hpnicfIfQoSWFQConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1
                       hpnicfIfQoSWFQTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1 no-access
A table of weighted fair queue information.
                           hpnicfIfQoSWFQEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1 no-access
Weighted fair queue information entry.
                               hpnicfIfQoSWFQQueueLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.1 integer32 read-only
The length of weighted fair queue.
                               hpnicfIfQoSWFQQueueNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.2 integer read-only
The number of weighted fair queue. Enumeration: 'size512': 6, 'size256': 5, 'size64': 3, 'size4096': 9, 'size128': 4, 'size2048': 8, 'size16': 1, 'size32': 2, 'size1024': 7.
                               hpnicfIfQoSWFQRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.3 rowstatus read-only
RowStatus.
                               hpnicfIfQoSWFQType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.1.1.1.4 integer read-only
The type of weighted fair queue. Enumeration: 'ip-precedence': 1, 'dscp': 2.
                   hpnicfIfQoSWFQRunInfoGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2
                       hpnicfIfQoSWFQRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1 no-access
A table of weighted fair queue statistic information.
                           hpnicfIfQoSWFQRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1 no-access
Weighted fair queue statistic information entry.
                               hpnicfIfQoSWFQSize 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.1 integer32 read-only
The number of packets in all the queues
                               hpnicfIfQoSWFQLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.2 integer32 read-only
The length of weighted fair queue.
                               hpnicfIfQoSWFQDiscardPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.3 counter64 read-only
The number of discarded packets in all the queues.
                               hpnicfIfQoSWFQHashedActiveQueues 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.4 integer32 read-only
The number of active queues.
                               hpnicfIfQoSWFQHashedMaxActiveQueues 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.5 integer32 read-only
The number of maximum active queues.
                               hpnicfIfQosWFQhashedTotalQueues 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.4.2.1.1.6 integer32 read-only
The number of queues.
               hpnicfIfQoSBandwidthGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5
                   hpnicfIfQoSBandwidthTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1 no-access
A table of bandwidth of interface information.
                       hpnicfIfQoSBandwidthEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1 no-access
Bandwidth information entry.
                           hpnicfIfQoSMaxBandwidth 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.1 integer32 read-only
The maximum bandwidth of interface. Unit : Kbps
                           hpnicfIfQoSReservedBandwidthPct 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.2 integer32 read-only
Max reserved bandwidth of the interface for QoS.
                           hpnicfIfQoSBandwidthRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.5.1.1.3 rowstatus read-only
RowStatus.
               hpnicfIfQoSQmtokenGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6
                   hpnicfIfQoSQmtokenTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1 no-access
A table of qmtoken information.
                       hpnicfIfQoSQmtokenEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1 no-access
Qmtoken information entry.
                           hpnicfIfQoSQmtokenNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.1 integer32 read-only
The number of tokens.
                           hpnicfIfQoSQmtokenRosStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.6.1.1.2 rowstatus read-only
RowStatus
               hpnicfIfQoSRTPQObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7
                   hpnicfIfQoSRTPQConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1
                       hpnicfIfQoSRTPQConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1 no-access
A table of Real-time protocol queue information.
                           hpnicfIfQoSRTPQConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1 no-access
The information of Real-time protocol queue entry.
                               hpnicfIfQoSRTPQStartPort 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.1 integer32 read-only
Minimum threshold of UDP destination port.
                               hpnicfIfQoSRTPQEndPort 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.2 integer32 read-only
Maximum threshold of UDP destination port.
                               hpnicfIfQoSRTPQReservedBandwidth 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.3 integer32 read-only
Maximum bandwidth. unit : kbps
                               hpnicfIfQoSRTPQCbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.4 unsigned32 read-only
Committed Burst Size. Unit: byte
                               hpnicfIfQoSRTPQRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.1.1.1.5 rowstatus read-only
RowStatus.
                   hpnicfIfQoSRTPQRunInfoGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2
                       hpnicfIfQoSRTPQRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1 no-access
A table of statistic information of Real-time protocol information.
                           hpnicfIfQoSRTPQRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1 no-access
Statistic information of Real-time protocol information entry.
                               hpnicfIfQoSRTPQPacketNumber 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.1 integer32 read-only
The number of packets in the Real-time protocol queue.
                               hpnicfIfQoSRTPQPacketSize 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.2 integer32 read-only
The size of Real-time protocol queue.
                               hpnicfIfQoSRTPQOutputPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.3 counter64 read-only
The number of output packets.
                               hpnicfIfQoSRTPQDiscardPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.7.2.1.1.4 counter64 read-only
The number of discard packets.
               hpnicfIfQoSCarListObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8
                   hpnicfIfQoCarListGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1
                       hpnicfIfQoSCarlTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1 no-access
Committed Access Rate List(CARL) table.
                           hpnicfIfQoSCarlEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1 no-access
CARL configuration infomation.
                               hpnicfIfQoSCarlListNum 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.1 integer32 no-access
The index of the table, which is the CARL number.
                               hpnicfIfQoSCarlParaType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.2 integer read-only
Parameter type of the CARL number. Enumeration: 'macAddress': 1, 'precMask': 2, 'dscpMask': 3.
                               hpnicfIfQoSCarlParaValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.3 octet string read-only
Parameter value of the CARL table.
                               hpnicfIfQoSCarlRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.2.8.1.1.1.4 rowstatus read-only
RowStatus.
           hpnicfIfQoSLineRateObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3
               hpnicfIfQoSLRConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1 no-access
A table of line rate configuration information.
                   hpnicfIfQoSLRConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1 no-access
Line rate configuration information entry.
                       hpnicfIfQoSLRDirection 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.1 direction no-access
Line rate on the inbound or outbound of data stream.
                       hpnicfIfQoSLRCir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.2 unsigned32 read-only
Committed Information Rate.
                       hpnicfIfQoSLRCbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.3 unsigned32 read-only
Committed Burst Size.
                       hpnicfIfQoSLREbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.4 unsigned32 read-only
Excess Burst Size.
                       hpnicfIfQoSRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.5 rowstatus read-only
RowStatus.
                       hpnicfIfQoSLRPir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.6 unsigned32 read-only
Peak Information Rate.
                       hpnicfIfQoSLRUnit 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.1.1.7 integer read-only
LR Unit: Absolute, Unit Kbps (1) Percent, Unit % (2) Enumeration: 'unitAbsolute': 1, 'unitPercent': 2.
               hpnicfIfQoSLRRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2 no-access
A table of line rate run info information.
                   hpnicfIfQoSLRRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1 no-access
Line rate run info information entry.
                       hpnicfIfQoSLRRunInfoPassedPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.1 counter64 read-only
The number of passed packets.
                       hpnicfIfQoSLRRunInfoPassedBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.2 counter64 read-only
The number of passed bytes.
                       hpnicfIfQoSLRRunInfoDelayedPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.3 counter64 read-only
The number of delayed packets.
                       hpnicfIfQoSLRRunInfoDelayedBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.4 counter64 read-only
The number of delayed bytes.
                       hpnicfIfQoSLRRunInfoActiveShaping 1.3.6.1.4.1.11.2.14.11.15.2.65.1.3.2.1.5 integer read-only
The flag of shaping. Enumeration: 'active': 1, 'inactive': 2.
           hpnicfIfQoSCARObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4
               hpnicfIfQoSAggregativeCarGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1
                   hpnicfIfQoSAggregativeCarNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.1 integer32 read-only
This object contains an appropriate value to be used for hpnicfIfQoSAggregativeCarIndex when creating rows in the hpnicfIfQoSAggregativeCarConfigTable. Begin with 1.
                   hpnicfIfQoSAggregativeCarConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2 no-access
A table of aggregative car information.
                       hpnicfIfQoSAggregativeCarConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1 no-access
Aggregative car information.
                           hpnicfIfQoSAggregativeCarIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.1 integer32 no-access
The index of aggregative car.
                           hpnicfIfQoSAggregativeCarName 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.2 octet string read-only
The name of aggregative car.
                           hpnicfIfQoSAggregativeCarCir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.3 unsigned32 read-only
Committed-information-rate. Unit : kbps
                           hpnicfIfQoSAggregativeCarCbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.4 unsigned32 read-only
Committed-burst-size. Unit : byte
                           hpnicfIfQoSAggregativeCarEbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.5 unsigned32 read-only
Excess-burst-size. Unit : byte
                           hpnicfIfQoSAggregativeCarPir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.6 unsigned32 read-only
Peak-information-rate. Unit : kbps
                           hpnicfIfQoSAggregativeCarGreenActionType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.7 caraction read-only
Supported green action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
                           hpnicfIfQoSAggregativeCarGreenActionValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.8 integer32 read-only
The value is to remark When green action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
                           hpnicfIfQoSAggregativeCarYellowActionType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.9 caraction read-only
Supported yellow action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
                           hpnicfIfQoSAggregativeCarYellowActionValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.10 integer32 read-only
The value is to remark When yellow action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
                           hpnicfIfQoSAggregativeCarRedActionType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.11 caraction read-only
Supported red action: invalid(0), pass(1), discard(3), remark(4), remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10), Hardware QoS : pass, discard, remark. Software QoS : pass, discard, remark-ip-pass(6), remark-mplsexp-pass(8), remark-dscp-pass(10). 'invalid' is returned only when getting value from software QoS.
                           hpnicfIfQoSAggregativeCarRedActionValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.12 integer32 read-only
The value is to remark When red action is remarking. For remark-dscp-pass, the range is 0~63; For remark-ip-pass and remark-mplsexp-pass, the range is 0~7; Only software QoS support this node. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
                           hpnicfIfQoSAggregativeCarType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.13 integer read-only
The type of aggregative CAR. The enumeration 'aggregative' indicates that the ports with a same aggregative CAR use one token bulk. The enumeration 'notAggregative' indicates that each port uses one token bulk. Enumeration: 'notAggregative': 2, 'aggregative': 1.
                           hpnicfIfQoSAggregativeCarRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.2.1.14 rowstatus read-only
RowStatus.
                   hpnicfIfQoSAggregativeCarApplyTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3 no-access
A table of aggregative car instance.
                       hpnicfIfQoSAggregativeCarApplyEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1 no-access
Aggregative car instance information.
                           hpnicfIfQoSAggregativeCarApplyDirection 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.1 direction no-access
Direction.
                           hpnicfIfQoSAggregativeCarApplyRuleType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.2 integer no-access
The type of class rule. Enumeration: 'ipv6acl': 2, 'ipv4acl': 1, 'any': 4, 'carl': 3.
                           hpnicfIfQoSAggregativeCarApplyRuleValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.3 integer32 no-access
The number of class rule. ipv4acl : 2000..5999 ipv6acl : 2000..42767 carl : 1..16 other types: 0.
                           hpnicfIfQoSAggregativeCarApplyCarIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.4 integer32 read-only
The index of aggregative car.
                           hpnicfIfQoSAggregativeCarApplyRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.3.1.5 rowstatus read-only
RowStatus.
                   hpnicfIfQoSAggregativeCarRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4 no-access
A table of aggregative car statistic information.
                       hpnicfIfQoSAggregativeCarRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1 no-access
Aggregative car statistic information.
                           hpnicfIfQoSAggregativeCarGreenPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.1 counter64 read-only
Number of packets conforming CIR.
                           hpnicfIfQoSAggregativeCarGreenBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.2 counter64 read-only
Number of bytes conforming CIR
                           hpnicfIfQoSAggregativeCarYellowPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.3 counter64 read-only
Number of yellow packets.
                           hpnicfIfQoSAggregativeCarYellowBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.4 counter64 read-only
Number of yellow bytes.
                           hpnicfIfQoSAggregativeCarRedPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.5 counter64 read-only
Number of packets exceeding CIR.
                           hpnicfIfQoSAggregativeCarRedBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.1.4.1.6 counter64 read-only
Number of bytes exceeding CIR.
               hpnicfIfQoSTricolorCarGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2
                   hpnicfIfQoSTricolorCarConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1 no-access
A table of tricolor car configuration information.
                       hpnicfIfQoSTricolorCarConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1 no-access
Tricolor car configuration information entry.
                           hpnicfIfQoSTricolorCarDirection 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.1 direction no-access
Direction.
                           hpnicfIfQoSTricolorCarType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.2 integer no-access
The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, carl, any. Enumeration: 'ipv6acl': 2, 'ipv4acl': 1, 'any': 4, 'carl': 3.
                           hpnicfIfQoSTricolorCarValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.3 integer32 no-access
The index of the table. ipv4acl: the number is ipv4 acl number; ipv6acl: the number is ipv6 acl number; carl: the number is CARL number; any: the number is 0;
                           hpnicfIfQoSTricolorCarCir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.4 unsigned32 read-only
Committed Information Rate. Unit: kbps.
                           hpnicfIfQoSTricolorCarCbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.5 unsigned32 read-only
Committed Burst Size. Unit: byte.
                           hpnicfIfQoSTricolorCarEbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.6 unsigned32 read-only
Excess Burst Size. Unit: byte.
                           hpnicfIfQoSTricolorCarPir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.7 unsigned32 read-only
Peak Information Rate. Unit: kbps.
                           hpnicfIfQoSTricolorCarGreenActionType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.8 caraction read-only
Green Action.
                           hpnicfIfQoSTricolorCarGreenActionValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.9 integer32 read-only
The value is to remark when green action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
                           hpnicfIfQoSTricolorCarYellowActionType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.10 caraction read-only
Yellow Action.
                           hpnicfIfQoSTricolorCarYellowActionValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.11 integer32 read-only
The value is to remark when yellow action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
                           hpnicfIfQoSTricolorCarRedActionType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.12 caraction read-only
Red Action
                           hpnicfIfQoSTricolorCarRedActionValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.13 integer32 read-only
The value is to remark when red action is remarking. For remark-dscp-continue and remark-dscp-pass, the range is 0~63; For remark-ip-continue and remark-ip-pass and remark-mplsexp-continue and remark-mplsexp-pass and remark-dot1p-continue and remark-dot1p-pass, the range is 0~7; For remark-fr-de-continue and remark-fr-de-pass and remark-atm-clp-continue and remark-atm-clp-pass, the range is 0~1. 255 is returned only when getting value from hardware QoS or when action being pass, discard of software QoS. 255 can't be set.
                           hpnicfIfQoSTricolorCarRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.1.1.14 rowstatus read-only
RowStatus.
                   hpnicfIfQoSTricolorCarRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2 no-access
A table of tricolor car statistic information.
                       hpnicfIfQoSTricolorCarRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1 no-access
Tricolor car statistic information entry.
                           hpnicfIfQoSTricolorCarGreenPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.1 counter64 read-only
The number of green packets.
                           hpnicfIfQoSTricolorCarGreenBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.2 counter64 read-only
The number of green bytes.
                           hpnicfIfQoSTricolorCarYellowPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.3 counter64 read-only
The number of yellow packets.
                           hpnicfIfQoSTricolorCarYellowBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.4 counter64 read-only
The number of yellow bytes.
                           hpnicfIfQoSTricolorCarRedPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.5 counter64 read-only
The number of red packets.
                           hpnicfIfQoSTricolorCarRedBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.4.2.2.1.6 counter64 read-only
The number of red bytes.
           hpnicfIfQoSGTSObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5
               hpnicfIfQoSGTSConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1 no-access
A table of generic traffic shaping information.
                   hpnicfIfQoSGTSConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1 no-access
Generic traffic shaping information entry.
                       hpnicfIfQoSGTSClassRuleType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.1 integer no-access
The index of the table, which is the matching type for the packets on interface: ipv4acl, ipv6acl, any, queue. Enumeration: 'queue': 4, 'ipv6acl': 3, 'ipv4acl': 2, 'any': 1.
                       hpnicfIfQoSGTSClassRuleValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.2 integer32 no-access
Value of type. ipv4acl : 2000..4999 ipv6acl : 2000..42767 any : 0 queue : 0..7
                       hpnicfIfQoSGTSCir 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.3 unsigned32 read-only
Committed Information Rate. Unit: kbps.
                       hpnicfIfQoSGTSCbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.4 unsigned32 read-only
Committed Burst Size. Unit: byte.
                       hpnicfIfQoSGTSEbs 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.5 unsigned32 read-only
Excess Burst Size. Unit: byte.
                       hpnicfIfQoSGTSQueueLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.6 integer32 read-only
The length of queue.
                       hpnicfIfQoSGTSConfigRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.1.1.7 rowstatus read-only
RowStatus.
               hpnicfIfQoSGTSRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2 no-access
A table of generic traffic shaping's statistic information.
                   hpnicfIfQoSGTSRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1 no-access
Generic traffic shaping's statistic information entry.
                       hpnicfIfQoSGTSQueueSize 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.1 integer32 read-only
The number of packets in the queue.
                       hpnicfIfQoSGTSPassedPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.2 counter64 read-only
The number of passed packets.
                       hpnicfIfQoSGTSPassedBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.3 counter64 read-only
The number of passed bytes.
                       hpnicfIfQoSGTSDiscardPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.4 counter64 read-only
The number of discard packets.
                       hpnicfIfQoSGTSDiscardBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.5 counter64 read-only
The number of discard bytes.
                       hpnicfIfQoSGTSDelayedPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.6 counter64 read-only
The number of delayed packets.
                       hpnicfIfQoSGTSDelayedBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.5.2.1.7 counter64 read-only
The number of delayed bytes.
           hpnicfIfQoSWREDObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6
               hpnicfIfQoSWredGroupGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1
                   hpnicfIfQoSWredGroupNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.1 integer32 read-only
This object contains an appropriate value to be used for hpnicfIfQoSWredGroupIndex when creating rows in the hpnicfIfQoSWredGroupTable. Begin with 0.
                   hpnicfIfQoSWredGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2 no-access
A table of WRED group information.
                       hpnicfIfQoSWredGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1 no-access
WRED group information.
                           hpnicfIfQoSWredGroupIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.1 integer32 no-access
WRED group index.
                           hpnicfIfQoSWredGroupName 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.2 octet string read-only
WRED group name.
                           hpnicfIfQoSWredGroupType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.3 integer read-only
Type of WRED group. Enumeration: 'atmclp': 5, 'ippre': 2, 'localpre': 4, 'dot1p': 1, 'userdefined': 0, 'frde': 6, 'dscp': 3, 'queue': 8, 'exp': 7, 'dropLevel': 9.
                           hpnicfIfQoSWredGroupWeightingConstant 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.4 integer32 read-only
Exponent for WRED calculates the average length of queue. If 'hpnicfIfQoSWredGroupType' is 'queue', the object is ineffective. So, it must use the object, which is 'hpnicfIfQoSWredGroupExponent' of hpnicfIfQoSWredGroupContentTable, to indicate the exponent of each queue of the queue WRED group.
                           hpnicfIfQoSWredGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.2.1.6 rowstatus read-only
RowStatus.
                   hpnicfIfQoSWredGroupContentTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3 no-access
A table of priority WRED information.
                       hpnicfIfQoSWredGroupContentEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1 no-access
Priority WRED information entry.
                           hpnicfIfQoSWredGroupContentIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.1 integer32 no-access
The priority of a packet. Different type of packet has different priority. Type of priority Range of priority dot1p 0..7 ippre 0..7 dscp 0..63 atmclp 0..1 frde 0..1 exp 0..7 queue 0..7 ( defined by product ) dropLevel 0..2
                           hpnicfIfQoSWredGroupContentSubIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.2 integer32 no-access
The sub index. Different type of packet has different value. Type of priority Range of value queue 0..2 other types : 0
                           hpnicfIfQoSWredLowLimit 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.3 integer32 read-only
Discard low limit.
                           hpnicfIfQoSWredHighLimit 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.4 integer32 read-only
Discard high limit.
                           hpnicfIfQoSWredDiscardProb 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.5 integer32 read-only
Discard probability.
                           hpnicfIfQoSWredGroupExponent 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.6 integer32 read-only
Exponent for WRED calculates the average length of queue. Only 'hpnicfIfQoSWredGroupType' is 'queue', the object is effective. This object is designed to indicate the exponent of each queue of the queue WRED group.
                           hpnicfIfQoSWredRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.3.1.7 rowstatus read-only
RowStatus.
                   hpnicfIfQoSWredGroupApplyIfTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4 no-access
A table of WRED group applied interface information.
                       hpnicfIfQoSWredGroupApplyIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1 no-access
WRED group applied interface information.
                           hpnicfIfQoSWredGroupApplyIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.1 integer32 read-only
WRED group index.
                           hpnicfIfQoSWredGroupApplyName 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.2 octet string read-only
WRED group name.
                           hpnicfIfQoSWredGroupIfRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.4.1.3 rowstatus read-only
RowStatus.
                   hpnicfIfQoSWredApplyIfRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5 no-access
A table of WRED statistic information.
                       hpnicfIfQoSWredApplyIfRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1 no-access
WRED statistic information.
                           hpnicfIfQoSWredPreRandomDropNum 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.1 counter64 read-only
The number of random drop.
                           hpnicfIfQoSWredPreTailDropNum 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.1.5.1.2 counter64 read-only
The number of tail drop.
               hpnicfIfQoSPortWredGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2
                   hpnicfIfQoSPortWredWeightConstantTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1 no-access
A table of port WRED configuration information.
                       hpnicfIfQoSPortWredWeightConstantEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1 no-access
Port WRED configuration information entry.
                           hpnicfIfQoSPortWredEnable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.1 truthvalue read-only
The object is used to enable or disable WRED function of the port. true: Enable WRED function of a port. false: Disable WRED function of a port.
                           hpnicfIfQoSPortWredWeightConstant 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.2 integer32 read-only
Weight constant.
                           hpnicfIfQoSPortWredWeightConstantRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.1.1.3 rowstatus read-only
RowStatus.
                   hpnicfIfQoSPortWredPreConfigTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2 no-access
A table of weighted random early detect precedence configuration information.
                       hpnicfIfQoSPortWredPreConfigEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1 no-access
Weighted random early detect precedence configuration information entry.
                           hpnicfIfQoSPortWredPreID 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.1 integer32 no-access
IP precedence, from 0 to 7.
                           hpnicfIfQoSPortWredPreLowLimit 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.2 integer32 read-only
Low Limit(number of packets)
                           hpnicfIfQoSPortWredPreHighLimit 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.3 integer32 read-only
High limit(number of packets)
                           hpnicfIfQoSPortWredPreDiscardProbability 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.4 integer32 read-only
Discard probability denominator
                           hpnicfIfQoSPortWredPreRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.2.1.5 rowstatus read-only
RowStatus.
                   hpnicfIfQoSPortWredRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3 no-access
A table of WRED statistic information.
                       hpnicfIfQoSPortWredRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1 no-access
WRED statistic information entry.
                           hpnicfIfQoSWREDTailDropNum 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.1 counter64 read-only
The number of tail drop.
                           hpnicfIfQoSWREDRandomDropNum 1.3.6.1.4.1.11.2.14.11.15.2.65.1.6.2.3.1.2 counter64 read-only
The number of random drop.
           hpnicfIfQoSPortPriorityObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7
               hpnicfIfQoSPortPriorityConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1
                   hpnicfIfQoSPortPriorityTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1 no-access
A table of port priority information.
                       hpnicfIfQoSPortPriorityEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1 no-access
Port priority information entry.
                           hpnicfIfQoSPortPriorityValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.1.1.1 integer32 read-write
The priority of a port.
                   hpnicfIfQoSPortPirorityTrustTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2 no-access
A table of each port's trusted priority information.
                       hpnicfIfQoSPortPirorityTrustEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1 no-access
Per-port trusted priority information entry.
                           hpnicfIfQoSPortPriorityTrustTrustType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.1 integer read-write
Trusted priority type of a port. Enumeration: 'dot1p': 2, 'auto': 7, 'dot11e': 6, 'dscp': 3, 'ipPrecedence': 5, 'exp': 4, 'untrust': 1.
                           hpnicfIfQoSPortPriorityTrustOvercastType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.7.1.2.1.2 integer read-write
The overcast type. Enumeration: 'noOvercast': 1, 'overcastDSCP': 2, 'overcastCOS': 3, 'overcast': 4.
           hpnicfIfQoSMapObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9
               hpnicfIfQoSPriMapConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1
                   hpnicfIfQoSPriMapGroupNextIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.1 integer32 read-only
This object contains an appropriate value to be used for hpnicfIfQoSPriMapGroupIndex when creating rows in the hpnicfIfQoSPriMapGroupTable. Begin with 64.
                   hpnicfIfQoSPriMapGroupTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2 no-access
A table of map group information.
                       hpnicfIfQoSPriMapGroupEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1 no-access
Map group information entry.
                           hpnicfIfQoSPriMapGroupIndex 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.1 integer32 no-access
The index of map, which are defined by system and user. The index of system defined map is 1 to 9. System defined map-name/map-index pairs like this: Map-index Map-name 1 dot1p-dp 2 dot1p-dscp 3 dot1p-lp 4 dscp-dot1p 5 dscp-dp 6 dscp-dscp 7 dscp-lp 8 exp-dp 9 exp-lp
                           hpnicfIfQoSPriMapGroupType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.2 integer read-only
The type of map group. Enumeration: 'dscp-dp': 6, 'exp-dp': 9, 'userdefined': 1, 'dscp-lp': 8, 'dscp-dscp': 7, 'dscp-dot1p': 5, 'dot1p-dp': 2, 'exp-lp': 10, 'dot1p-dscp': 3, 'dot1p-lp': 4.
                           hpnicfIfQoSPriMapGroupName 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.3 octet string read-only
The name of map group.
                           hpnicfIfQoSPriMapGroupRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.2.1.4 rowstatus read-only
RowStatus.
                   hpnicfIfQoSPriMapContentTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3 no-access
A table of priority map configuration information.
                       hpnicfIfQoSPriMapContentEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1 no-access
Priority map configuration information entry.
                           hpnicfIfQoSPriMapGroupImportValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.1 integer32 no-access
Priority map table import value list. Different map has different hpnicfIfQoSPriMapConfigImportValue. Map-name Range of hpnicfIfQoSPriMapConfigImportValue dot1p-dp (0..7) dot1p-dscp (0..7) dot1p-lp (0..7) dscp-dot1p (0..63) dscp-dp (0..63) dscp-dscp (0..63) dscp-lp(7) (0..63) exp-dp(8) (0..7) exp-lp (0..7)
                           hpnicfIfQoSPriMapGroupExportValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.2 integer32 read-only
Priority map table output. Different map has different hpnicfIfQoSPriMapGroupExportValue. dot1p-dp: 0..7 dot1p-dscp: 0..63 dot1p-lp: 0..7 dscp-dot1p: 0..7 dscp-dp: 0..7 dscp-dscp: 0..63 dscp-lp: 0..7 exp-dp: 0..7 exp-lp: 0..7
                           hpnicfIfQoSPriMapContentRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.3.1.3 rowstatus read-only
RowStatus.
                   hpnicfIfQoSPrePriMapTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4 no-access
Pre-defined priority mapping table information.
                       hpnicfIfQoSPrePriMapEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1 no-access
Pre-defined priority mapping table entry.
                           hpnicfIfQoSPrePriMapTableType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.1 integer no-access
The type of pre-defined priority mapping table. Enumeration: 'expToLp': 3, 'upToDp': 22, 'upToLp': 23, 'dscpToExp': 10, 'expToDot1p': 12, 'upToFc': 25, 'upToUp': 33, 'upToDot1p': 19, 'expToDscp': 11, 'dscpToLp': 4, 'expToExp': 13, 'dot1pToDot1p': 34, 'upToRpr': 24, 'dot1pToExp': 30, 'dot1pToDscp': 8, 'dot1pToDp': 2, 'dscpToDot1p': 7, 'lpToDot11e': 28, 'lpToDot1p': 14, 'dscpToDp': 6, 'lpToExp': 31, 'ippreToRpr': 18, 'dot1pToLp': 1, 'lpToLp': 29, 'lpToDp': 32, 'lpTodscp': 26, 'dscpToRpr': 16, 'dot1pToRpr': 15, 'expToRpr': 17, 'upToDscp': 20, 'dot11eToLp': 27, 'dscpToDscp': 9, 'expToDp': 5, 'upToExp': 21.
                           hpnicfIfQoSPrePriMapTableColor 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.2 integer no-access
The color of pre-defined priority mapping table. Enumeration: 'green': 2, 'noColor': 1, 'yellow': 3, 'red': 4.
                           hpnicfIfQoSPrePriMapTableDirection 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.3 integer no-access
The direction of pre-defined priority mapping table. Enumeration: 'inbound': 2, 'noDirection': 1, 'outbound': 3.
                           hpnicfIfQoSPrePriMapTableImportValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.4 integer32 no-access
Input value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableImportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableImportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dot11e (0..7)
                           hpnicfIfQoSPrePriMapTableExportValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.9.1.4.1.5 integer32 read-write
Output value of priority mapping table. Different priority has different hpnicfIfQoSPrePriMapTableExportValue. Priority-type Range of hpnicfIfQoSPrePriMapTableExportValue dot1p (0..7) dscp (0..63) lp (0..7) exp (0..7) ipPrecedence (0..7) up (0..7) dp (0..2) fc (0..7) rpr (0..2)
           hpnicfIfQoSL3PlusObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10
                 hpnicfIfQoSPortBindingGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1
                     hpnicfIfQoSPortBindingTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1 no-access
A table of EACL sub-interface binding information for L3+ board .
                         hpnicfIfQoSPortBindingEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1 no-access
Binding information entry.
                             hpnicfIfQoSBindingIf 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.1 integer32 read-only
The binding interface.
                             hpnicfIfQoSBindingRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.10.1.1.1.2 rowstatus read-only
RowStatus
           hpnicfQoSTraStaObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11
                 hpnicfQoSTraStaConfigGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1
                     hpnicfQoSIfTraStaConfigInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1 no-access
A table of traffic statistics configuration information.
                         hpnicfQoSIfTraStaConfigInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1 no-access
An entry of interface traffic statistics configuration information.
                             hpnicfQoSIfTraStaConfigDirection 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.1 direction no-access
The direction of the traffic statistics.
                             hpnicfQoSIfTraStaConfigQueue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.2 octet string read-only
The bitmap of Queue ID. The octet specifies queues 0 through 7. If a bit has a value of '1', the corresponding queue is configured in the set of Queues; if a bit has a value of '0', the corresponding queue is not configured.
                             hpnicfQoSIfTraStaConfigDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.3 octet string read-only
The bitmap of Dot1p value. The octet specifies Dot1p values 0 through 7. If a bit has a value of '1', the corresponding Dot1p value is configured in the set of Dot1p values; if a bit has a value of '0', the corresponding Dot1p value is not configured.
                             hpnicfQoSIfTraStaConfigDscp 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.4 octet string read-only
The bitmap of Dscp value. Each octet within this value specifies a set of eight Dscp values, with the first octet specifying Dscp values 0 through 7, the second octet specifying Dscp values 8 through 15, etc. If a bit has a value of '1', the corresponding Dscp value is configured in the set of Dscp values; if a bit has a value of '0', the corresponding Dscp value is not configured.
                             hpnicfQoSIfTraStaConfigVlan 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.5 octet string read-only
The bitmap of VLAN ID. Each octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 0 through 7, the second octet specifying VLANs 8 through 15, etc. If a bit has a value of '1', the corresponding VLAN is configured in the set of VLANs; if a bit has a value of '0', the corresponding VLAN is not configured.
                             hpnicfQoSIfTraStaConfigStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.1.1.1.6 rowstatus read-only
The row status of this table entry.
                 hpnicfQoSTraStaRunGroup 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2
                     hpnicfQoSIfTraStaRunInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1 no-access
A table of traffic statistics running information.
                         hpnicfQoSIfTraStaRunInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1 no-access
An entry of interface traffic statistics running information.
                             hpnicfQoSIfTraStaRunObjectType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.1 integer no-access
Type of statistics object. Enumeration: 'queue': 1, 'vlanID': 4, 'dscp': 3, 'dot1p': 2.
                             hpnicfQoSIfTraStaRunObjectValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.2 integer32 no-access
Value range for the object type: for Queue: 0~7 for Dot1p: 0~7 for Dscp: 0~63 for VlanID: 1~4094
                             hpnicfQoSIfTraStaRunDirection 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.3 direction no-access
The direction of the traffic statistics.
                             hpnicfQoSIfTraStaRunPassPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.4 counter64 read-only
Number of passed packets.
                             hpnicfQoSIfTraStaRunDropPackets 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.5 counter64 read-only
Number of dropped packets.
                             hpnicfQoSIfTraStaRunPassBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.6 counter64 read-only
Number of passed bytes.
                             hpnicfQoSIfTraStaRunDropBytes 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.7 counter64 read-only
Number of dropped bytes.
                             hpnicfQoSIfTraStaRunPassPPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.8 counter64 read-only
PPS (packets per second) of passed packets.
                             hpnicfQoSIfTraStaRunPassBPS 1.3.6.1.4.1.11.2.14.11.15.2.65.1.11.2.1.1.9 counter64 read-only
BPS (bytes per second) of passed packets.
           hpnicfQoSGlobalPriorityObject 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12
                 hpnicfQoSRemarkTcpPortPriTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1 no-access
A table of remarking TCP port priority information. The priority field of all packets with the specified TCP port will be remarked to the configured value.
                     hpnicfQoSRemarkTcpPortPriEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1 no-access
Remarking TCP port priority information entry.
                         hpnicfQoSRemarkTcpPortStart 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.1 integer32 no-access
Start value of TCP port range.
                         hpnicfQoSRemarkTcpPortEnd 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.2 integer32 read-only
End value of TCP port range. It can not be less than start value.
                         hpnicfQoSRemarkTcpPortType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.3 integer read-only
IPv4 packet, IPv6 packet, or all IP packet. Enumeration: 'ipv6': 3, 'ipAll': 1, 'ipv4': 2.
                         hpnicfQoSRemarkTcpPortDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.4 unsigned32 read-only
Dot1p value.
                         hpnicfQoSRemarkTcpPortDscp 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.5 unsigned32 read-only
DSCP value.
                         hpnicfQoSRemarkTcpPortRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.1.1.6 rowstatus read-only
Row status.
                 hpnicfQoSRemarkUdpPortPriTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2 no-access
A table of remarking UDP port priority information. The priority field of all packets with the specified UDP port will be remarked to the configured value.
                     hpnicfQoSRemarkUdpPortPriEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1 no-access
Remarking UDP port priority information entry.
                         hpnicfQoSRemarkUdpPortStart 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.1 integer32 no-access
Start value of UDP port range.
                         hpnicfQoSRemarkUdpPortEnd 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.2 integer32 read-only
End value of UDP port range. It can not be less than start value.
                         hpnicfQoSRemarkUdpPortType 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.3 integer read-only
IPv4 packet, IPv6 packet, or all IP packet. Enumeration: 'ipv6': 3, 'ipAll': 1, 'ipv4': 2.
                         hpnicfQoSRemarkUdpPortDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.4 unsigned32 read-only
Dot1p value.
                         hpnicfQoSRemarkUdpPortDscp 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.5 unsigned32 read-only
DSCP value.
                         hpnicfQoSRemarkUdpPortRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.2.1.6 rowstatus read-only
Row status.
                 hpnicfQoSRemarkIPv4AddrPriTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3 no-access
A table of remarking IPv4 address priority information.
                     hpnicfQoSRemarkIPv4AddrPriEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1 no-access
Remarking IPv4 address priority information entry. The priority field of all IPv4 packets with the specified IP address will be remarked to the configured value.
                         hpnicfQoSRemarkIPv4AddrValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.1 ipaddress no-access
IPv4 address.
                         hpnicfQoSRemarkIPv4AddrMask 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.2 ipaddress read-only
Mask of IPv4 address.
                         hpnicfQoSRemarkIPv4AddrMaskLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.3 unsigned32 read-only
Mask length of IPv4 address.
                         hpnicfQoSRemarkIPv4AddrDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.4 unsigned32 read-only
Dot1p value.
                         hpnicfQoSRemarkIPv4AddrDscp 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.5 unsigned32 read-only
DSCP value.
                         hpnicfQoSRemarkIPv4AddrRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.3.1.6 rowstatus read-only
Row status.
                 hpnicfQoSRemarkIPv6AddrPriTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4 no-access
A table of remarking IPv6 address priority information. The priority field of all IPv6 packets with the specified IP address will be remarked to the configured value.
                     hpnicfQoSRemarkIPv6AddrPriEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1 no-access
Remarking IPv6 address priority information entry.
                         hpnicfQoSRemarkIPv6AddrValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.1 inetaddressipv6 no-access
IPv6 address.
                         hpnicfQoSRemarkIPv6AddrPrefixLength 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.2 inetaddressprefixlength read-only
Prefix length of IPv6 address.
                         hpnicfQoSRemarkIPv6AddrDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.3 unsigned32 read-only
Dot1p value.
                         hpnicfQoSRemarkIPv6AddrDscp 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.4 unsigned32 read-only
DSCP value.
                         hpnicfQoSRemarkIPv6AddrRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.4.1.5 rowstatus read-only
Row status.
                 hpnicfQoSRemarkProtocolPriTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5 no-access
A table of remarking layer 3 protocol priority information. The 802.1p priority field of all packets of the specified protocol will be remarked to the configured value.
                     hpnicfQoSRemarkProtocolPriEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1 no-access
Remarking layer 3 protocol priority information entry.
                         hpnicfQoSRemarkProtocolValue 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.1 integer no-access
Layer 3 protocol type. Enumeration: 'arp': 3, 'netbeui': 6, 'sna': 5, 'ip': 1, 'appletalk': 4, 'ipx': 2.
                         hpnicfQoSRemarkProtocolDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.2 unsigned32 read-only
Dot1p value.
                         hpnicfQoSRemarkProtocolRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.5.1.3 rowstatus read-only
Row status.
                 hpnicfQoSRemarkVlanPriTable 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6 no-access
A table of remarking VLAN priority information. The priority field of all packets of the specified VLAN will be remarked to the configured value.
                     hpnicfQoSRemarkVlanPriEntry 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1 no-access
Remarking VLAN priority information entry.
                         hpnicfQoSRemarkVlanStart 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.1 integer32 no-access
Start VLAN ID.
                         hpnicfQoSRemarkVlanEnd 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.2 integer32 read-only
End VLAN ID. It can not be less than start value.
                         hpnicfQoSRemarkVlanDot1p 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.3 unsigned32 read-only
Dot1p value.
                         hpnicfQoSRemarkVlanDscp 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.4 unsigned32 read-only
DSCP value.
                         hpnicfQoSRemarkVlanRowStatus 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.6.1.5 rowstatus read-only
Row status.
                 hpnicfQoSTypeOfServiceObjects 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7
                     hpnicfQoSTypeOfServiceMode 1.3.6.1.4.1.11.2.14.11.15.2.65.1.12.7.1 integer read-write
Global type of service. The type of service is disabled by default. When in ip-precedence mode, device uses ip-precedence value to determine the 802.1p priority of the packet and its outbound queue. When in DSCP mode, device uses DSCP value to determine the 802.1p priority of the packet and its outbound queue. Enumeration: 'disabled': 1, 'dscp': 3, 'ipPrecedence': 2.