HPN-ICF-HGMP-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-HGMP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, HPN-ICF-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfHgmp 1.3.6.1.4.1.11.2.14.11.15.8.7
This MIB contains objects to manage the hpnicfhgmp operations, which are used on lanswitch products.
     hpnicfClusterObject 1.3.6.1.4.1.11.2.14.11.15.8.7.1
This MIB contains objects to manage the cluster operations, which are used on lanswitch products.
         hpnicfhgmpEventsV2 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0
Definition point for cluster notifications.
             hpnicfhgmpMemberfailure 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.1
When a cluster member failure, send a snmp trap to the network management.
             hpnicfhgmpMemberRecover 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.2
When a cluster member recover, send a snmp trap to the network management.
             hpnicfhgmpMemberStatusChange 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.3
When a cluster member status change, send a snmp trap to the network management.
             hpnicfhgmpNetTopChange 1.3.6.1.4.1.11.2.14.11.15.8.7.1.0.4
When net topology of this cluster change, send a snmp trap to the network management.
         hpnicfhgmpSetVLANSecurity 1.3.6.1.4.1.11.2.14.11.15.8.7.1.1 integer read-write
Configure whether to perform the VLAN check inside the cluster. Enumeration: 'noSecurity': 0, 'security': 1.
         hpnicfhgmpHandShakeInterval 1.3.6.1.4.1.11.2.14.11.15.8.7.1.2 integer32 read-write
Handshaking interval of the cluster member switches.
         hpnicfhgmpHandShakeHoldtime 1.3.6.1.4.1.11.2.14.11.15.8.7.1.3 integer32 read-write
Holdtime of administrator switch and member switch in the cluster.
         hpnicfhgmpGrpMemberTableChange 1.3.6.1.4.1.11.2.14.11.15.8.7.1.4 integer32 read-only
Add 1 to the member list after it changes. The administrator checks if the value has changed. If not, he will not read the list once more.
         hpnicfhgmpMemberDisconRate 1.3.6.1.4.1.11.2.14.11.15.8.7.1.5 integer32 read-only
Disconnection times of the member and administrator switches divided by member number times 1000.
         hpnicfhgmpCmdLanswitchFlag 1.3.6.1.4.1.11.2.14.11.15.8.7.1.6 integer read-write
Administrator switch flag Enumeration: 'true': 1, 'false': 0.
         hpnicfhgmpCmdClusterName 1.3.6.1.4.1.11.2.14.11.15.8.7.1.7 octet string read-write
Cluster name of the administrator switch
         hpnicfhgmpMngPriIpSegCMIP 1.3.6.1.4.1.11.2.14.11.15.8.7.1.8 ipaddress read-write
The private management IP address of the administrator switch, which can not be modified after the cluster has been created.
         hpnicfhgmpMngPriIpMask 1.3.6.1.4.1.11.2.14.11.15.8.7.1.9 ipaddress read-write
The private management IP address mask assigned by the administrator switch, which cannot be modified after the cluster has been created.
         hpnicfhgmpFtpServer 1.3.6.1.4.1.11.2.14.11.15.8.7.1.10 ipaddress read-write
The cluster members can access the Ftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
         hpnicfhgmpTftpServer 1.3.6.1.4.1.11.2.14.11.15.8.7.1.11 ipaddress read-write
The cluster members can access the Tftp Server through the administrator switch, which can only be configured and accessed on the administrator switch.
         hpnicfhgmpSnmpHost 1.3.6.1.4.1.11.2.14.11.15.8.7.1.12 ipaddress read-write
The Snmp Host to send the cluster trap packets, which can only be configured and accessed on the administrator switch.
         hpnicfhgmpLogHost 1.3.6.1.4.1.11.2.14.11.15.8.7.1.13 ipaddress read-write
Log host of the cluster, which can only be configured and accessed on the administrator switch.
         hpnicfhgmpGrpMemberTable 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14 no-access
Table of cluster member switches
               hpnicfhgmpGrpMemberEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1 no-access
                   hpnicfhgmpGrpMemberDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.1 octet string read-only
4 bytes reserved as 0x0 + 6 bytes of MAC address, expressed as a character string of the hexadecimal number.
                   hpnicfhgmpGrpMemberSerial 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.2 integer32 read-only
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it.
                   hpnicfhgmpGrpMemberIpAddr 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.3 ipaddress read-only
The private IP addresses of the member switches for the communication inside the cluster.
                   hpnicfhgmpGrpMemberName 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.4 octet string read-only
Hostname of the member switch
                   hpnicfhgmpGrpMemberPassword 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.5 octet string read-write
Member password for joining a cluster
                   hpnicfhgmpGrpMemberPlatform 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.6 octet string read-only
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
                   hpnicfhgmpGrpMemberStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.7 integer read-only
Member status on the administrator switch, use for displaying the network management status. Enumeration: 'fault': 1, 'normal': 0.
                   hpnicfhgmpGrpMemberDisconCount 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.8 integer32 read-only
Count of inside communication disconnection between the member switch and the administrator switch.
                   hpnicfhgmpGrpMemberEnrollTime 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.9 integer32 read-only
Enrollment time of the member, measured in seconds.
                   hpnicfhgmpGrpMemberOperate 1.3.6.1.4.1.11.2.14.11.15.8.7.1.14.1.10 rowstatus read-write
Operation indication field, indicates the operation of adding/removing a member by the network management agent.
         hpnicfhgmpMemberResetTable 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15 no-access
Reset a member switch in the cluster.
               hpnicfhgmpMemberResetEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1 no-access
                   hpnicfhgmpMemberResetMAC 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.1 octet string read-only
The management MAC address of the switch to be reset, which is the unique identifier of the switch.
                   hpnicfhgmpMemberEraseflash 1.3.6.1.4.1.11.2.14.11.15.8.7.1.15.1.2 integer read-write
Whether to erase the configuration file from the flash after resetting the switch. Read this node, cannotget(65535) will be returned. Enumeration: 'cannotget': 65535, 'erase': 1, 'noErase': 0.
         hpnicfhgmpClusterRole 1.3.6.1.4.1.11.2.14.11.15.8.7.1.16 integer read-only
This switch's role in cluster. Enumeration: 'roleMEMBERSW': 2, 'roleUNISW': 17, 'roleBAKSW': 3, 'roleCASW': 16, 'roleCMDSW': 1.
         hpnicfhgmpClusterMaxPoolNum 1.3.6.1.4.1.11.2.14.11.15.8.7.1.17 integer read-only
Max switch members that the cluster can support(include administrator switch).
         hpnicfhgmpClusterCmdSwMac 1.3.6.1.4.1.11.2.14.11.15.8.7.1.18 octet string read-only
The MAC address of administrator switch. It will be filled with zero when not be a member of cluster.
         hpnicfhgmpRun 1.3.6.1.4.1.11.2.14.11.15.8.7.1.19 integer read-write
Enable cluster on this switch. Enumeration: 'true': 1, 'false': 0.
         hpnicfhgmpProtocolMac 1.3.6.1.4.1.11.2.14.11.15.8.7.1.22
               hpnicfhgmpClusterProtocolMac 1.3.6.1.4.1.11.2.14.11.15.8.7.1.22.1 macaddress read-write
Protocol MAC of HGMP protocol family. All multicast packets of this protocol family use this MAC as destination MAC.
         hpnicfhgmpTopologyManagement 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23
               hpnicfhgmpWhitelistTable 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1 no-access
Cluster switches white list table. White list topology is the topology which has been affirmed by network administrator in a cluster, and all devices in white list topology are recorded in this table. Against to white list table, black list table records the devices which are denied to join in cluster. Adding a black list device to white list table will cause a failure.
                   hpnicfhgmpWhitelistEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1 no-access
Entry items
                       hpnicfhgmpWhitelistDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.1 octet string no-access
Unique identifier indicating a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
                       hpnicfhgmpWhitelistSerial 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.2 integer32 read-only
When adding member switch to the cluster, the administrator switch will assign an unique integer to identify it. 0xffff means invalid value for this object.
                       hpnicfhgmpWhitelistRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.1.1.3 rowstatus read-only
The row status of this table.
               hpnicfhgmpWhitelistNbTable 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2 no-access
Cluster switches white list neighboring information table. White list neighbor table records all neighbor devices for every white list device. In fact, white list neighbor table displays the whole white list topology.
                   hpnicfhgmpWhitelistNbEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1 no-access
Entry items
                       hpnicfhgmpWhitelistNbIndex 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.1 integer32 no-access
Index of a switch which is the neighbor of a white list switch identified by 'hgmpWhitelistDeviceId'.
                       hpnicfhgmpWhitelistNbDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.2 octet string read-only
Unique identifier indicating a neighbor switch of a white list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
                       hpnicfhgmpWhitelistPortName 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.3 octet string read-only
The name of the port which a white list switch connects to the neighbor specified by 'hgmpWhitelistNbIndex'.
                       hpnicfhgmpWhitelistNbPortName 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.2.1.4 octet string read-only
The name of the port which a neighbor device connects to the white list switch specified by 'hgmpWhitelistDeviceId'.
               hpnicfhgmpBlacklistTable 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3 no-access
Cluster switches black list table. The black list table records all black list devices, and a device in black list is not permitted to join in any cluster.
                   hpnicfhgmpBlacklistEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1 no-access
Entry items
                       hpnicfhgmpBlacklistDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.1 octet string no-access
Unique identifier indicating a black list switch. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
                       hpnicfhgmpBlacklistAccessDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.2 octet string read-only
Unique identifier indicating the access device of a black list switch. Tracing from a black list device to the cluster commander switch, the device which the black list switch directly connects to is the access device. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address. 10 bytes of 0xff means invalid value for this object. For example, if the MAC is 000f-e459-000a, the value of this object is an octet string: '00' '00' '00' '00' '00' '0f' 'e4' '59' '00' '0a'.
                       hpnicfhgmpBlacklistAccessPortName 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.3 octet string read-only
The port which the access device connecting to the black list switch is named access port, the object returns the access port name. An empty string means invalid value for this object.
                       hpnicfhgmpBlacklistRowStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.1.23.3.1.4 rowstatus read-only
The row status of this table.
         hpnicfhgmpMemberPriPortTable 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24 no-access
This table contains port number for different network protocols on each member switch. The port number can be used to access a specified member switch with specified protocol and private IP address.
               hpnicfhgmpMemberPriPortEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1 no-access
Information about a specified member private port entry. The indexes of the entry are hpnicfhgmpGrpMemberDevId and hpnicfhgmpMemberPriPortProto, which indicate entries in the table.
                   hpnicfhgmpMemberDevId 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.1 octet string read-only
Unique identifier indicating the switch in cluster. Value format of the this object is 'XXXXYYYYYY', in which 'XXXX' is is reserved as 4 bytes of 0x0, 'YYYYYY' is a MAC address.
                   hpnicfhgmpMemberPriPortProto 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.2 unsigned32 no-access
The index of this table. Each instance value of this object corresponds to a different protocol.
                   hpnicfhgmpMemberPriPortProtoDescr 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.3 displaystring read-only
It describes the hpnicfhgmpMemberPriPortProtocol object value. For example, it is 'SNMP' when hpnicfhgmpMemberPriPortProtocol value is 1.
                   hpnicfhgmpMemberPriPortNum 1.3.6.1.4.1.11.2.14.11.15.8.7.1.24.1.4 unsigned32 read-only
The private port number of member switch, used by specified hpnicfhgmpMemberPriPortProto. By using the private IP address, specified protocol and port number, other devices outside cluster can access member switch. The private IP address can be acquired by reading hpnicfhgmpGrpMemberIpAddr.
     hpnicfStackObject 1.3.6.1.4.1.11.2.14.11.15.8.7.2
This MIB contains objects to manage the stack operations, which is used on lanswitch products.
         hpnicfhgmpStackEventsV2 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0
Definition point for Stack notifications.
             hpnicfhgmpStackMemberfailure 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.1
When a stack member failure, send a snmp trap to the network management.
             hpnicfhgmpStackMemberRecover 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.2
When a stack member Recover, send a snmp trap to the network management.
             hpnicfhgmpStackMemberStatusChange 1.3.6.1.4.1.11.2.14.11.15.8.7.2.0.3
When a stack member status change, send a snmp trap to the network management.
         hpnicfhgmpStackMemberTableChange 1.3.6.1.4.1.11.2.14.11.15.8.7.2.1 integer32 read-only
Change identifier of the stack member table.
         hpnicfhgmpStackMemberDisconRate 1.3.6.1.4.1.11.2.14.11.15.8.7.2.2 integer32 read-only
Disconnection rate of the stack member switches.
         hpnicfhgmpMainLanswitchFlag 1.3.6.1.4.1.11.2.14.11.15.8.7.2.3 integer read-write
The status of the local switch in the stack. Enumeration: 'true': 1, 'false': 0.
         hpnicfhgmpStackIpPoolStartIP 1.3.6.1.4.1.11.2.14.11.15.8.7.2.4 ipaddress read-write
The first address of the management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
         hpnicfhgmpStackIpPoolLength 1.3.6.1.4.1.11.2.14.11.15.8.7.2.5 integer read-write
The length of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
         hpnicfhgmpStackMemberTable 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6 no-access
Stack member table.
             hpnicfhgmpStackMemberEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1 no-access
                 hpnicfhgmpStackMemberDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.1 octet string read-only
2 bytes address type of the switch + 2 bytes zero + MAC address, expressed as a hexadecimal number string.
                 hpnicfhgmpStackMemberSerial 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.2 integer32 read-only
When adding a member switch to the stack, the master switch will assign an unique integer to identify it.
                 hpnicfhgmpStackMemberIpAddr 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.3 ipaddress read-only
The private member IP address for the communication inside the stack.
                 hpnicfhgmpStackMemberName 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.4 octet string read-only
Hostname of the member switch.
                 hpnicfhgmpStackMemberPassword 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.5 octet string read-only
Member password for joining a stack.
                 hpnicfhgmpStackMemberPlatform 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.6 octet string read-only
Set the hardware platform. A null string indicates the information does not exist in the device adjacency table.
                 hpnicfhgmpStackMemberStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.7 integer read-only
Member status on the master switch, use for displaying the network management status. Enumeration: 'fault': 1, 'normal': 0.
                 hpnicfhgmpStackMemberDisconCount 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.8 integer32 read-only
Count of inside communication disconnection between the member switch and the master switch.
                 hpnicfhgmpStackMemberEnrollTime 1.3.6.1.4.1.11.2.14.11.15.8.7.2.6.1.9 integer32 read-only
Enrollment time of the member, measured in seconds.
         hpnicfhgmpStackRole 1.3.6.1.4.1.11.2.14.11.15.8.7.2.7 integer read-only
This switch's role status in stack. Enumeration: 'roleMEMBERSW': 2, 'roleUNISW': 17, 'roleBAKSW': 3, 'roleCASW': 16, 'roleCMDSW': 1.
         hpnicfhgmpStackMaxPoolNum 1.3.6.1.4.1.11.2.14.11.15.8.7.2.8 integer read-only
Max switch members in one stack that the switch support (include main switch).
         hpnicfhgmpStackMainSwMac 1.3.6.1.4.1.11.2.14.11.15.8.7.2.9 octet string read-only
The MAC address of main switch. It will be 00.00.00 when not be a member of stack.
         hpnicfhgmpStackIpPoolMask 1.3.6.1.4.1.11.2.14.11.15.8.7.2.10 ipaddress read-write
The mask of the management IP segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment.
     hpnicfNTDPObject 1.3.6.1.4.1.11.2.14.11.15.8.7.4
This MIB contains objects to manage the ntdp operations, which are used on lanswitch products.
         hpnicfhgmpNTDPCollectTopTime 1.3.6.1.4.1.11.2.14.11.15.8.7.4.1 integer32 read-write
Topology collection interval of the administrator switch of the cluster, measured in minutes.
         hpnicfhgmpNTDPHopRange 1.3.6.1.4.1.11.2.14.11.15.8.7.4.2 integer32 read-write
Range of the topology collection of the administrator switch
         hpnicfhgmpNTDPRun 1.3.6.1.4.1.11.2.14.11.15.8.7.4.3 integer read-write
Enable/Disable the NTDP function on the switch. Enumeration: 'true': 1, 'false': 0.
         hpnicfhgmpNTDPPortDelay 1.3.6.1.4.1.11.2.14.11.15.8.7.4.4 integer32 read-write
Set the delay to forward the topology request via the ports, measured in milliseconds.
         hpnicfhgmpNTDPHopDelay 1.3.6.1.4.1.11.2.14.11.15.8.7.4.5 integer32 read-write
Set the delay to forward the topology request from every hop, measured in milliseconds.
         hpnicfhgmpNTDPLastTopCollectDuration 1.3.6.1.4.1.11.2.14.11.15.8.7.4.6 integer32 read-only
Duration of the latest overall topology collection, a performance count measured in seconds.
         hpnicfhgmpNTDPCacheChange 1.3.6.1.4.1.11.2.14.11.15.8.7.4.7 integer32 read-only
Add 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
         hpnicfhgmpNTDPTOPTableChange 1.3.6.1.4.1.11.2.14.11.15.8.7.4.8 integer32 read-only
Add 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again.
         hpnicfhgmpNTDPInterfaceTable 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9 no-access
Enable/Disable the NTDP on the switch port.
             hpnicfhgmpNTDPInterfaceEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1 no-access
                 hpnicfhgmpNTDPInterfaceIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.1 integer32 read-only
Unique identifier an interface of the device.
                 hpnicfhgmpNTDPInterfaceEnable 1.3.6.1.4.1.11.2.14.11.15.8.7.4.9.1.2 integer read-write
If it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry as false. Enumeration: 'true': 1, 'false': 0.
         hpnicfhgmpNTDPCacheTable 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10 no-access
Access the information about the switch from the topology table.
               hpnicfhgmpNTDPCacheEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1 no-access
                   hpnicfhgmpNTDPCacheHashIndex 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.1 integer32 read-only
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
                   hpnicfhgmpNTDPCacheDeviceID 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.2 octet string read-only
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
                   hpnicfhgmpNTDPCacheClusterName 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.3 octet string read-only
Name of the cluster including the device.
                   hpnicfhgmpNTDPCacheClusterRole 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.4 integer read-only
Cluster role of the current device, which can be a administrator switch (0x01), member switch(0x02), backup switch(0x03), candidate switch(0x10) or an independent switch (incapable of cluster member) (0x11). Enumeration: 'roleMSW': 2, 'roleBKSW': 3, 'roleCOSW': 1, 'roleCASW': 16, 'roleUNISW': 17.
                   hpnicfhgmpNTDPCacheCapabilities 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.5 integer read-only
The capabilities of the device. FF indicates that the field was not included in in the latest NTDP packet.
                   hpnicfhgmpNTDPCacheVersion 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.6 octet string read-only
The version information of the corresponding device. A null string indicates that the field was not included in in the latest NTDP packet.
                   hpnicfhgmpNTDPCachePlatform 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.7 octet string read-only
Hardware platform. A null string indicates that the field was not included in the latest NTDP packet.
                   hpnicfhgmpNTDPCacheMngVLAN 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.8 integer read-only
The management VLAN ID of the device.
                   hpnicfhgmpNTDPCacheHop 1.3.6.1.4.1.11.2.14.11.15.8.7.4.10.1.9 integer read-only
Hops to this switch.
         hpnicfhgmpNTDPTopTable 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11 no-access
Access the topology structure collected by the NTDP.
               hpnicfhgmpNTDPTopEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1 no-access
                   hpnicfhgmpNTDPTopHashIndex 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.1 integer32 read-only
Our NTDP information is saved in the HASH table on the administrator switch. Using DeviceID as index will lead to the comparison of a large amount of character strings, which puts too many burdens on the administrator switch. A HAHSIndex is added to reduce the character string comparison to the least range.
                   hpnicfhgmpNTDPTopEdgeStartDevID 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.2 octet string read-only
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
                   hpnicfhgmpNTDPTopEdgeIndex 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.3 integer32 read-only
Edge index of this entry in the data structure.
                   hpnicfhgmpNTDPTopEdgeEndDevID 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.4 octet string read-only
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
                   hpnicfhgmpNTDPTopEdgeStartPort 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.5 octet string read-only
The number of the first port of a topology edge. Interface type + card number / slot number / sequence number.
                   hpnicfhgmpNTDPTopEdgeStartPortFullDuplex 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.6 integer read-only
The full-duplex status of the first port on a topology edge. Enumeration: 'full': 1, 'half': 0.
                   hpnicfhgmpNTDPTopEdgeStartPortSpeed 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.7 integer32 read-only
The speed of the first port on a topology edge.
                   hpnicfhgmpNTDPTopEdgeEndPort 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.8 octet string read-only
The number of the last port of a topology edge. Interface type + card number / slot number / sequence number.
                   hpnicfhgmpNTDPTopLinkStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.4.11.1.11 integer read-only
In STP or RSTP, it describes link status according to port STP steady status. In MSTP it describes STP steady status of the instance which management VLAN belongs to. Either 'hgmpNTDPTopEdgeStartPort' or 'hgmpNTDPTopEdgeEndPort' STP steady status is 'blocking', this object is 'blocking', otherwise is 'forwarding'. If STP or MSTP is disabled, this object is 'forwarding'. Enumeration: 'forwarding': 1, 'blocking': 2.
     hpnicfNDPObject 1.3.6.1.4.1.11.2.14.11.15.8.7.5
This MIB contains objects to manage the ndp operations, which are used on lanswitch products.
         hpnicfNDPStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.5.1 integer read-write
NDP protocol module enable flag Enumeration: 'enable': 1, 'disable': 0.
         hpnicfNDPHelloTimer 1.3.6.1.4.1.11.2.14.11.15.8.7.5.2 integer32 read-write
NDP packet transmission interval, measured in seconds.
         hpnicfNDPAgingTime 1.3.6.1.4.1.11.2.14.11.15.8.7.5.3 integer32 read-write
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.
         hpnicfNDPChange 1.3.6.1.4.1.11.2.14.11.15.8.7.5.4 counter32 read-only
Change identifier of the Neighbor table
         hpnicfNDPPortTable 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5 no-access
Configure to enable/disable the interface NDP of the switch.
             hpnicfNDPPortEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1 no-access
                 hpnicfNDPIfIndex 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.1 integer32 read-only
Unique identifier of an interface of the device.
                 hpnicfNDPPortStatus 1.3.6.1.4.1.11.2.14.11.15.8.7.5.5.1.2 integer read-write
If it is enable, the device will send and receive the NDP packets via the interface. To disable the NDP function on the interface, set the entry as false. Enumeration: 'enable': 1, 'disable': 0.
         hpnicfNDPPortNbTable 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6 no-access
NDP neighbor information on the switch.
             hpnicfNDPPortNbEntry 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1 no-access
                 hpnicfNDPPortNbDeviceId 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.1 octet string read-only
2 bytes address type of the member switch + 2 bytes zero + MAC address, expressed as a character string of the hexadecimal number.
                 hpnicfNDPPortNbPortName 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.2 octet string read-only
Unique identifier of a port. A null string indicates that the field was not included in in the latest NDP packet. Interface type + card number / slot number / sequence number.
                 hpnicfNDPPortNbDeviceName 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.3 octet string read-only
Device name. A null string indicates that the field was not included in the latest NDP packet.
                 hpnicfNDPPortNbPortMode 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.4 integer read-only
The neighbor port duplex mode. Enumeration: 'auto': 3, 'full': 1, 'half': 2.
                 hpnicfNDPPortNbProductVer 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.5 octet string read-only
Product version. A null string indicates that the field was not included in the latest NDP packet.
                 hpnicfNDPPortNbHardVer 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.6 octet string read-only
Hardware version. A null string indicates that the field was not included in the latest NDP packet.
                 hpnicfNDPPortNbBootromVer 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.7 octet string read-only
Bootrom version. A null string indicates that the field was not included in the latest NDP packet.
                 hpnicfNDPPortNbSoftVer 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.8 octet string read-only
Software version. A null string indicates that the field was not included in the latest NDP packet.
                 hpnicfNDPPortNbAgingtime 1.3.6.1.4.1.11.2.14.11.15.8.7.5.6.1.9 integer32 read-only
How long the NDP information of the local switch can be hold in the adjacent switch, measured in seconds.