HPN-ICF-DOT11-ACMT-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HPN-ICF-DOT11-ACMT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, IANAifType-MIB, HPN-ICF-DOT11-REF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpnicfDot11ACMT 1.3.6.1.4.1.11.2.14.11.15.2.75.1
This MIB defines information as per wireless AC and tunnel between AP and AC. If NMS intends to get more detailed information for the AP and AC, it could refer entPhysicalIndex in the Entity MIB to get entity information. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Radio The chip set to receive and send wireless signal. Fat AP Applied in the home, SOHO and so on, and it could independently work without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. Basic Service Set The IEEE 802.11 BSS of an AP comprises of the stations directly associating with the AP. It will be identified by BSSID.
     hpnicfDot11ACObjectGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1
         hpnicfDot11ACObject 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1
             hpnicfDot11CurrentACMACMode 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.1 hpnicfdot11macmodetype read-only
Represents which MAC mode defined in the CAPWAP draft is in use for the AC.
             hpnicfDot11MaxAPNumPermitted 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.2 integer32 read-only
Represents the maximum number of AP connection permitted for one AC.
             hpnicfDot11MaxStationNumPermitted 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.3 integer32 read-only
Represents the maximum number of station connection permitted for one AC.
             hpnicfDot11RunAPNumThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.1.4 integer32 read-write
When the percentage of run AP number is larger than this threshold, a notification will be sent.
         hpnicfDot11ACLoadInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2
             hpnicfDot11APConnectCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.1 integer32 read-only
Represents the total number of APs which are connecting to AC.
             hpnicfDot11StationConnectCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.2 integer32 read-only
Represents the total number of stations which are accessing the WLAN service through AC.
             hpnicfDot11ACIFLoadInfoTable 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3 no-access
Represents AP number information of interface.
                 hpnicfDot11ACIFLoadInfoEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1 no-access
Each entry represents AP number information of an interface
                     hpnicfDot11ACIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.1 integer32 no-access
Represents index of AC interface.
                     hpnicfDot11ACIfApNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.2 integer32 read-only
Represents AP number connected to the AC interface.
                     hpnicfDot11ACIfStaNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.3 integer32 read-only
Represents Station number connected to the AC interface.
                     hpnicfDot11ACIfName 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.3.1.4 octet string read-only
Represents InterfaceName AP number connected to AC interface.
             hpnicfDot11MasterAPCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.4 integer32 read-only
Represents the total number of AP which have established the master tunnel with AC.
             hpnicfDot11SlaveAPCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.5 integer32 read-only
Represents the total number of AP which have established the slave tunnel with AC.
             hpnicfDot11ConnectAutoAPCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.6 integer32 read-only
Represents the total number of auto APs that are connecting to AC.
             hpnicfDot11PersistentAPCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.7 integer32 read-only
Represents the total number of persistent AP.
             hpnicfDot11AcUploadFrameCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.8 counter64 read-only
Represents the number of frames that AP sends to AC through LWAPP tunnel.
             hpnicfDot11AcDownloadFrameCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.9 counter64 read-only
Represents the number of frames that AC sends to AP through LWAPP tunnel.
             hpnicfDot11AcUploadFrameBytes 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.10 counter64 read-only
Represents the bytes of frames that AP sends to AC through LWAPP tunnel.
             hpnicfDot11AcDownloadFrameBytes 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.11 counter64 read-only
Represents the bytes of frames that AC sends to AP through LWAPP tunnel.
             hpnicfDot11BackupACRole 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.12 integer read-only
This object represents the Identity of the AC null: Not configured master: Master AC slave: Slave AC. Enumeration: 'slave': 3, 'null': 1, 'master': 2.
             hpnicfDot11BackupACNMSIP 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.13 ipaddress read-only
This object represents the manger IP address of the slave ac.
             hpnicfDot11ACBackupMode 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.14 integer read-only
This object represents the ac backup mode. Enumeration: 'hotBackup': 2, 'null': 1, 'coldBackup': 3.
             hpnicfDot11ACBackupStatus 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.15 integer read-only
This object represents the ac backup status. Enumeration: 'active': 1, 'standby': 2.
             hpnicfDot11ACSwitchCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.16 integer32 read-only
This object represents the ac switch times.
             hpnicfDot11ACSouthifPacketOutputCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.17 counter64 read-only
Represents the count of output packets with the down-link interface.
             hpnicfDot11ACSouthifPacketOutputBytes 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.18 counter64 read-only
Represents the bytes of output packets with the down-link interface.
             hpnicfDot11ACSouthifPacketInputCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.19 counter64 read-only
Represents the count of input packets with the down-link interface.
             hpnicfDot11ACSouthifPacketInputBytes 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.20 counter64 read-only
Represents the bytes of input packets with the down-link interface.
             hpnicfDot11TotalAPconnected 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.21 integer32 read-only
Represents the total number of AP which are connected to AC.
             hpnicfDot11RemainingAPcapacity 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.2.22 integer32 read-only
Represents the remaining AP capacity of the AC.
         hpnicfDot11WLANAssocStatisInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3
             hpnicfDot11StationAssocSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.1 counter32 read-only
Represents the total number of station association.
             hpnicfDot11StationAssocFailSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.2 counter32 read-only
Represents the total number of station association failure.
             hpnicfDot11StationReassocSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.3 counter32 read-only
Represents the total number of station reassociation.
             hpnicfDot11StationAssocRejectedSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.4 counter32 read-only
Represents the total number of station association rejected on account of resource limit.
             hpnicfDot11StationExDeAuthenSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.5 counter32 read-only
Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP).
             hpnicfDot11StationCurAssocSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.6 integer32 read-only
Represents the total number of current associated stations.
             hpnicfDot11StationAssocReqSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.7 counter32 read-only
Represents the total number of station association request.
             hpnicfDot11StationReassocReqSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.8 counter32 read-only
Represents the total number of station reassociation request.
             hpnicfDot11StationReassocFailSum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.3.9 counter32 read-only
Represents the total number of station reassociation failure.
         hpnicfDot11ACBASInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4
             hpnicfDot11ACBASSysObjects 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.1
             hpnicfDot11ACBASTableObjects 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2
                 hpnicfDot11ACBASIfTable 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3 no-access
Represents the BAS information of interfaces.
                     hpnicfDot11ACBASIfEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1 no-access
Each entry represents the BAS information of an interface
                         hpnicfDot11ACBASIfIndex 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.1 integer32 no-access
The ifIndex of the BAS interface.
                         hpnicfDot11ACBASIfDescr 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.2 octet string read-only
A textual string containing information about the BAS interface.
                         hpnicfDot11ACBASIfType 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.4.2.3.1.3 ianaiftype read-only
The type of the BAS interface.
         hpnicfDot11ACStaUserSecAuthStatis 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5
             hpnicfDot11ACStaUserAuthCurNumber 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.1 integer32 read-only
Represents the current number of user authenticated with this AC.
             hpnicfDot11ACStaUserConnFailCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.2 counter32 read-only
Represents the total number of user disconnected with this AC.
             hpnicfDot11ACStaUserAuthReqCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.3 counter32 read-only
Represents the total number of user authenticate request with this AC.
             hpnicfDot11ACStaUserAuthSuccCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.4 counter32 read-only
Represents the total number of users authenticated successful with this AC.
             hpnicfDot11ACStaUserAuthFailCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.5 counter32 read-only
Represents the total number of user authenticated failed with this AC.
             hpnicfDot11ACStaUserAllAuthCntCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.5.6 counter32 read-only
Represents the total number of users authenticated with this AC.
         hpnicfDot11ACStaSecAuthTypeStatis 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6
             hpnicfDot11ACStaUserPortalOnlineNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.1 integer32 read-only
Represents the number of online portal users authenticated by RADIUS, including MAC-trigger and IMSIAuth users.
             hpnicfDot11ACStaUserFreeAuthOnlineNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.2 integer32 read-only
Numbers of online user is no need authenticated.
             hpnicfDot11ACStaUserAssociateAuthOnlineNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.3 integer32 read-only
Represents the number of online users authenticated by associated authentication, excluding AutoAuth users.
             hpnicfDot11ACStaUserMacAuthOnlineNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.4 integer32 read-only
The numbers of online user which is launched authentication by MAC address and authenticated by Radius.
             hpnicfDot11ACStaUserPortalLostConnectionCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.5 counter32 read-only
For PortalAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
             hpnicfDot11ACStaUserFreeAuthLostConnectionCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.6 counter32 read-only
For FreeAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
             hpnicfDot11ACStaUserAssociateAuthLostConnectionCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.7 counter32 read-only
For AssociateAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
             hpnicfDot11ACStaUserMacAuthLostConnectionCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.8 counter32 read-only
For MacAuth user, represents disconnection count but voluntarily disconnect, it should not delete authenticated user when client roamed.
             hpnicfDot11ACStaPortalAuthReqCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.9 counter32 read-only
Represents PortalAuth request count after AP up.
             hpnicfDot11ACStaAssociateAuthReqCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.10 counter32 read-only
Represents AssociateAuth request count after AP up.
             hpnicfDot11ACStaMacAuthReqCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.11 counter32 read-only
Represents MacAuth request count after AP up.
             hpnicfDot11ACStaPortalAuthSuccCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.12 counter32 read-only
Represents count of PortalAuth authenticated successfully after AP up.
             hpnicfDot11ACStaAssociateAuthSuccCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.13 counter32 read-only
Represents count of AssociateAuth authenticated successfully after AP up.
             hpnicfDot11ACStaMacAuthSuccCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.14 counter32 read-only
Represents count of MacAuth authenticated successfully after AP up.
             hpnicfDot11ACStaPortalAuthReqFailCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.15 counter32 read-only
Represents count of PortalAuth failure in request after AP up.
             hpnicfDot11ACStaAssociateAuthReqFailCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.16 counter32 read-only
Represents count of AssociateAuth failure in request after AP up.
             hpnicfDot11ACStaMacAuthReqFailCnt 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.17 counter32 read-only
Represents count of MacAuth failure in request after AP up.
             hpnicfDot11ACStaUserAutoAuthOnlineNumCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.18 integer32 read-only
Represents the number of online users authenticated by auto authentication.
             hpnicfDot11ACStaUserAutoAuthLostConnectionCntCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.19 counter32 read-only
Represents the disconnection count of AutoAuth users, excluding the ones who disconnect AP by themselves.
             hpnicfDot11ACStaAutoAuthReqCntCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.20 counter32 read-only
Represents the count of AutoAuth requests after AP up.
             hpnicfDot11ACStaAutoAuthSuccCntCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.21 counter32 read-only
Represents the count of successful AutoAuth authentications after AP up.
             hpnicfDot11ACStaAutoAuthReqFailCntCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.6.22 counter32 read-only
Represents the count of failed AutoAuth requests after AP is up.
         hpnicfDot11ACPortalStatisticCMTable 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7 no-access
The table describes portal statistics information.
             hpnicfDot11ACPortalStatisticCMEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1 no-access
Each entry contains the portal statistics information of an SSID.
                 hpnicfDot11ACPortalStatisticSSIDCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.1 octet string no-access
Represents the service policy name.
                 hpnicfDot11ACPortalStatAuthReqCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.2 counter32 read-only
Represents the total number of portal authentication requests from portal server to AC.
                 hpnicfDot11ACPortalStatAuthRespCM 1.3.6.1.4.1.11.2.14.11.15.2.75.1.1.7.1.3 counter32 read-only
Represents the total number of portal authentication responses from AC to portal server.
     hpnicfDot11CAPWAPTunnelGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2
         hpnicfDot11CAPWAPTunnelTable 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1 no-access
The table will list all the APs which are connecting to the AC by the CAPWAP tunnel protocol.
             hpnicfDot11CAPWAPTunnelEntry 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1 no-access
Each entry contains information of data tunnel and control tunnel of AP which is connecting to AC.
                 hpnicfDot11CurrTunnelAPID 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.1 hpnicfdot11objectidtype no-access
To uniquely identify the CAPWAP tunnel set up between the AP identified by APID and a specific AC.
                 hpnicfDot11CtrlTunnelCurrSec 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.2 hpnicfdot11tunnelsecschemtype read-only
Represents what security scheme is in use for control tunnel.
                 hpnicfDot11CtrlTunnelUpTime 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.3 integer32 read-only
Represents how long for control tunnel up. If the value is zero, then tunnel is not set up.
                 hpnicfDot11DataTunnelCurrSec 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.4 hpnicfdot11tunnelsecschemtype read-only
Represents what security scheme is in use for data tunnel.
                 hpnicfDot11DataTunnelUpTime 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.5 integer32 read-only
Represents how long for data tunnel up. If the value is zero, then tunnel is not set up.
                 hpnicfDot11CtrlTunnelUpTimeTicks 1.3.6.1.4.1.11.2.14.11.15.2.75.1.2.1.1.6 timeticks read-only
Represents how long control tunnel is up. If the value is zero, then tunnel is not set up.
     hpnicfDot11ACMtNotifyGroup 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3
         hpnicfDot11ACMtTraps 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0
             hpnicfDot11ACMtTunnelSetupTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.1
This notification is sent by AC when CAPWAP tunnel becomes up. By this way, NMS will immediately know tunnel up event. It is unnecessary to identify whether it is control or data tunnel.
             hpnicfDot11ACMtTunnelDownTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.2
This notification is sent by AC when CAPWAP tunnel becomes down. By this way, NMS will immediately know tunnel down event. It is unnecessary to identify whether it is control or data tunnel.
             hpnicfDot11ACMtBackupSwtTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.3
This trap is sent by AC when AC switches from master to slave or from slave to master.
             hpnicfDot11ACLoadBalanceTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.4
This trap is sent by AC when load-balance is enabled on AC.
             hpnicfDot11ACStaFullTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.5
This notification will be sent when STA is full on AC.
             hpnicfDot11ACStatusSwitchTrap 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.6
This notification will be sent when AC switches from standby to active or from standby to active.
             hpnicfDot11RunAPNumOverload 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.7
The notification will be sent by AC when run AP number exceeds the threshold.
             hpnicfDot11RunAPNumOverloadRecover 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.0.8
The notification will be sent by AC when run AP number recover normal from overload state.
         hpnicfDot11ACMtTrapVarObjects 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1
             hpnicfDot11ACMtTrapTunlDwnInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.1 integer no-access
Represents the reason for tunnel down. The following values are supported: tunnelTimeout - When AC detects the tunnel is broken, - it will notify NMS. keyUpdateFailure - rekey process is failed, tunnel will be broken. apReset - Administrator reset AP. apCrash - AP reboot for system crash. apDeleted - Delete AP from AC and trigger tunnel down. apCfgChange - The configuration for AP was changed. Enumeration: 'apDeleted': 5, 'apCrash': 4, 'keyUpdateFailure': 2, 'tunnelTimeout': 1, 'apReset': 3, 'apCfgChange': 6.
             hpnicfDot11ACMtTrapTunlUpInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.2 integer no-access
Represents the reason for tunnel up. The following values are supported: up(1) - The AP joined AC. Enumeration: 'up': 1.
             hpnicfDot11ACMtTrapBackupSwitchInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.3 integer no-access
Represents status which the AC switches to. The following values are supported: masterToSlave - The AC switches from master to slave. slaveToMaster - The AC switches from slave to master. Enumeration: 'slaveToMaster': 2, 'masterToSlave': 1.
             hpnicfDot11ACMtTrapTnlAPName 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.4 octet string no-access
Represents name of the AP which sets up the tunnel with the AC.
             hpnicfDot11ACMtTrapTnlAPIPAddr 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.5 ipaddress no-access
Represents IP address of the AP which sets up the tunnel with the AC.
             hpnicfDot11LoadBalanceType 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.6 integer no-access
Represents which kind load balance is enabled by AC. The following values are supported: traffic mode load-balancing: traffic snapshot is considered. session mode load-balancing: the number of users associated with the AP/radio is considered. Enumeration: 'session': 2, 'traffic': 1.
             hpnicfDot11LoadBalanceThreshold 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.7 integer32 no-access
Represents the value of load balance threshold.
             hpnicfDot11ACMtTrapAPIPv6Addr 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.8 octet string no-access
Represents IPv6 address of the AP which sets up the tunnel with the AC.
             hpnicfDot11ACMtTrapTunlDwnCount 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.9 integer32 no-access
Represents how many times that the tunnel between AC and AP has down.
             hpnicfDot11ACMaxStaNum 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.10 integer32 no-access
Represents the max number of STA on AC.
             hpnicfDot11ACMtTrapTnlAPSysName 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.11 octet string no-access
Represents system name of the AP which sets up the tunnel with the AC.
             hpnicfDot11ACMtFirstTrapTime 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.12 timeticks no-access
Represents the first trap time.
             hpnicfDot11ACStatusSwitchInfo 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.13 integer no-access
Represents status which the AC switches to. The following values are supported: activeToStandby - The AC switches from active to standby. standbyToActive - The AC switches from standby to active. Enumeration: 'standbyToActive': 2, 'activeToStandby': 1.
             hpnicfDot11SourceACNmsIP 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.14 ipaddress no-access
Represents the NMS IP address of master AC.
             hpnicfDot11ACMtTrapAPMacAddress 1.3.6.1.4.1.11.2.14.11.15.2.75.1.3.1.15 macaddress no-access
Represents the MAC address of an AP.