HP-UNIX: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-UNIX
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hp 1.3.6.1.4.1.11
       nm 1.3.6.1.4.1.11.2
           system 1.3.6.1.4.1.11.2.3
               general 1.3.6.1.4.1.11.2.3.1
                   computerSystem 1.3.6.1.4.1.11.2.3.1.1
                       computerSystemUpTime 1.3.6.1.4.1.11.2.3.1.1.1 timeticks read-only
Time since the last boot.
                       computerSystemUsers 1.3.6.1.4.1.11.2.3.1.1.2 gauge read-only
Number of users logged on to system.
                       computerSystemAvgJobs1 1.3.6.1.4.1.11.2.3.1.1.3 gauge read-only
Average number of jobs in the last 1 minute * 100.
                       computerSystemAvgJobs5 1.3.6.1.4.1.11.2.3.1.1.4 gauge read-only
Average number of jobs in the last 5 minutes * 100.
                       computerSystemAvgJobs15 1.3.6.1.4.1.11.2.3.1.1.5 gauge read-only
Average number of jobs in the last 15 minutes * 100.
                       computerSystemMaxProc 1.3.6.1.4.1.11.2.3.1.1.6 integer read-only
Maximum number of processes allowed in system. Implemented with Extensible SNMP Agent.
                       computerSystemFreeMemory 1.3.6.1.4.1.11.2.3.1.1.7 gauge read-only
Free memory. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemPhysMemory 1.3.6.1.4.1.11.2.3.1.1.8 integer read-only
Physical memory. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemMaxUserMem 1.3.6.1.4.1.11.2.3.1.1.9 gauge read-only
Maximum user memory. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemSwapConfig 1.3.6.1.4.1.11.2.3.1.1.10 integer read-only
Swap space configured. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemEnabledSwap 1.3.6.1.4.1.11.2.3.1.1.11 gauge read-only
Enabled via swapon. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemFreeSwap 1.3.6.1.4.1.11.2.3.1.1.12 gauge read-only
Currently free swap space. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemUserCPU 1.3.6.1.4.1.11.2.3.1.1.13 counter read-only
CPU used by users. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemSysCPU 1.3.6.1.4.1.11.2.3.1.1.14 counter read-only
CPU used by system. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemIdleCPU 1.3.6.1.4.1.11.2.3.1.1.15 counter read-only
CPU idle. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                       computerSystemNiceCPU 1.3.6.1.4.1.11.2.3.1.1.16 counter read-only
CPU nice. SunOS - not implemented. Implemented with Extensible SNMP Agent.
                   fileSystem 1.3.6.1.4.1.11.2.3.1.2
                       fileSystemMounted 1.3.6.1.4.1.11.2.3.1.2.1 gauge read-only
The number of file systems mounted.
                       fileSystemTable 1.3.6.1.4.1.11.2.3.1.2.2 no-access
File system table.
                           fileSystemEntry 1.3.6.1.4.1.11.2.3.1.2.2.1 no-access
Each entry contains objects for a particular file system.
                               fileSystemID1 1.3.6.1.4.1.11.2.3.1.2.2.1.1 integer read-only
First file system ID.
                               fileSystemID2 1.3.6.1.4.1.11.2.3.1.2.2.1.2 integer read-only
Second file system ID.
                               fileSystemName 1.3.6.1.4.1.11.2.3.1.2.2.1.3 displaystring read-only
Name of mounted file system.
                               fileSystemBlock 1.3.6.1.4.1.11.2.3.1.2.2.1.4 integer read-only
Total blocks in file system.
                               fileSystemBfree 1.3.6.1.4.1.11.2.3.1.2.2.1.5 integer read-only
Free blocks in file system.
                               fileSystemBavail 1.3.6.1.4.1.11.2.3.1.2.2.1.6 integer read-only
Free blocks avail to non-superuser.
                               fileSystemBsize 1.3.6.1.4.1.11.2.3.1.2.2.1.7 integer read-only
Fundamental file system block size.
                               fileSystemFiles 1.3.6.1.4.1.11.2.3.1.2.2.1.8 integer read-only
Total file nodes in file system.
                               fileSystemFfree 1.3.6.1.4.1.11.2.3.1.2.2.1.9 integer read-only
Free file nodes in file system.
                               fileSystemDir 1.3.6.1.4.1.11.2.3.1.2.2.1.10 displaystring read-only
File system path prefix.
                   processes 1.3.6.1.4.1.11.2.3.1.4
                       processNum 1.3.6.1.4.1.11.2.3.1.4.1 gauge read-only
The number of processes running.
                       processTable 1.3.6.1.4.1.11.2.3.1.4.2 no-access
Processes Table. Implemented with Extensible SNMP Agent.
                           processEntry 1.3.6.1.4.1.11.2.3.1.4.2.1 no-access
Each entry contains information about a process running on the system.
                               processPID 1.3.6.1.4.1.11.2.3.1.4.2.1.1 integer read-only
The process ID (pid).
                               processIdx 1.3.6.1.4.1.11.2.3.1.4.2.1.2 integer read-only
Index for pstat() requests. SunOS - not implemented.
                               processUID 1.3.6.1.4.1.11.2.3.1.4.2.1.3 integer read-only
Process User ID.
                               processPPID 1.3.6.1.4.1.11.2.3.1.4.2.1.4 integer read-only
Parent process ID.
                               processDsize 1.3.6.1.4.1.11.2.3.1.4.2.1.5 gauge read-only
Process data size.
                               processTsize 1.3.6.1.4.1.11.2.3.1.4.2.1.6 gauge read-only
Process text size.
                               processSsize 1.3.6.1.4.1.11.2.3.1.4.2.1.7 gauge read-only
Process stack size.
                               processNice 1.3.6.1.4.1.11.2.3.1.4.2.1.8 gauge read-only
Process nice value.
                               processMajor 1.3.6.1.4.1.11.2.3.1.4.2.1.9 integer read-only
Process tty major number. SunOS - not implemented.
                               processMinor 1.3.6.1.4.1.11.2.3.1.4.2.1.10 integer read-only
Process tty minor number. SunOS - not implemented.
                               processPgrp 1.3.6.1.4.1.11.2.3.1.4.2.1.11 integer read-only
Process group of this process.
                               processPrio 1.3.6.1.4.1.11.2.3.1.4.2.1.12 integer read-only
Process priority.
                               processAddr 1.3.6.1.4.1.11.2.3.1.4.2.1.13 integer read-only
Address of process (in memory).
                               processCPU 1.3.6.1.4.1.11.2.3.1.4.2.1.14 gauge read-only
Processor utilization for scheduling.
                               processUtime 1.3.6.1.4.1.11.2.3.1.4.2.1.15 timeticks read-only
User time spent executing.
                               processStime 1.3.6.1.4.1.11.2.3.1.4.2.1.16 timeticks read-only
System time spent executing.
                               processStart 1.3.6.1.4.1.11.2.3.1.4.2.1.17 timeticks read-only
Time Process started.
                               processFlags 1.3.6.1.4.1.11.2.3.1.4.2.1.18 integer read-only
Flags associated with process. SunOS - values found in /usr/include/sys/proc.h. Enumeration: 'sys': 2, 'incore': 1, 'locked': 4, 'trace2': 16, 'trace': 8.
                               processStatus 1.3.6.1.4.1.11.2.3.1.4.2.1.19 integer read-only
The process status. SunOS - sleep(1), wait(2), run(3), idle (4), zombie(5), stop(6) Enumeration: 'run': 2, 'stop': 3, 'zombie': 4, 'idle': 6, 'other': 5, 'sleep': 1.
                               processWchan 1.3.6.1.4.1.11.2.3.1.4.2.1.20 integer read-only
If processStatus is sleep, value sleeping on.
                               processProcNum 1.3.6.1.4.1.11.2.3.1.4.2.1.21 integer read-only
Processor this process last run on. SunOS - not implemented.
                               processCmd 1.3.6.1.4.1.11.2.3.1.4.2.1.22 displaystring read-only
Command the process is running.
                               processTime 1.3.6.1.4.1.11.2.3.1.4.2.1.23 integer read-only
Resident time for scheduling.
                               processCPUticks 1.3.6.1.4.1.11.2.3.1.4.2.1.24 counter read-only
Ticks of cpu time.
                               processCPUticksTotal 1.3.6.1.4.1.11.2.3.1.4.2.1.25 counter read-only
Total ticks for life of process. SunOS - not implemented.
                               processFss 1.3.6.1.4.1.11.2.3.1.4.2.1.26 integer read-only
Fair Share Schedular Group. SunOS - not implemented.
                               processPctCPU 1.3.6.1.4.1.11.2.3.1.4.2.1.27 gauge read-only
Percent CPU * 100 for this process.
                               processRssize 1.3.6.1.4.1.11.2.3.1.4.2.1.28 gauge read-only
Resident Set Size for process (private pages).
                               processSUID 1.3.6.1.4.1.11.2.3.1.4.2.1.29 integer read-only
saved UID.
                               processUname 1.3.6.1.4.1.11.2.3.1.4.2.1.30 displaystring read-only
User name.
                               processTTY 1.3.6.1.4.1.11.2.3.1.4.2.1.31 displaystring read-only
Process TTY. SunOS - not implemented.
                   cluster 1.3.6.1.4.1.11.2.3.1.5
                       isClustered 1.3.6.1.4.1.11.2.3.1.5.1 integer read-only
Describes whether machine is clustered or not. Enumeration: 'rootserver': 2, 'cnode': 3, 'standalone': 1.
                       clusterTable 1.3.6.1.4.1.11.2.3.1.5.2 no-access
List of nodes on the cluster.
                           clusterEntry 1.3.6.1.4.1.11.2.3.1.5.2.1 no-access
Each entry contains information about the clustered node.
                               clusterID 1.3.6.1.4.1.11.2.3.1.5.2.1.1 integer read-only
The cnode id.
                               clusterMachineID 1.3.6.1.4.1.11.2.3.1.5.2.1.2 octet string read-only
The cnode machine id.
                               clusterType 1.3.6.1.4.1.11.2.3.1.5.2.1.3 displaystring read-only
The cnode type (r or c).
                               clusterCnodeName 1.3.6.1.4.1.11.2.3.1.5.2.1.4 displaystring read-only
The cnode name.
                               clusterSwapServingCnode 1.3.6.1.4.1.11.2.3.1.5.2.1.5 integer read-only
The swap serving cnode.
                               clusterKcsp 1.3.6.1.4.1.11.2.3.1.5.2.1.6 integer read-only
KCSP.
                               clusterCnodeAddress 1.3.6.1.4.1.11.2.3.1.5.2.1.7 ipaddress read-only
The cnode IP Address.
                       clusterCnodeID 1.3.6.1.4.1.11.2.3.1.5.3 integer read-only
The machine's cnodes id
               hpux 1.3.6.1.4.1.11.2.3.2
                   hp9000s300 1.3.6.1.4.1.11.2.3.2.2
                   hp9000s800 1.3.6.1.4.1.11.2.3.2.3
                   hp9000s700 1.3.6.1.4.1.11.2.3.2.5
               hp386 1.3.6.1.4.1.11.2.3.8
               hpsun 1.3.6.1.4.1.11.2.3.10
                     sparc 1.3.6.1.4.1.11.2.3.10.1
                         sun4 1.3.6.1.4.1.11.2.3.10.1.1
                         sun5 1.3.6.1.4.1.11.2.3.10.1.2
           interface 1.3.6.1.4.1.11.2.4
               ieee8023Mac 1.3.6.1.4.1.11.2.4.1
                   ieee8023MacTable 1.3.6.1.4.1.11.2.4.1.1 no-access
A list of IEEE 802.3 Interface entries.
                       ieee8023MacEntry 1.3.6.1.4.1.11.2.4.1.1.1 no-access
Each entry contains statistics for ieee 802.3 interfaces.
                           ieee8023MacIndex 1.3.6.1.4.1.11.2.4.1.1.1.1 integer read-only
The index value that uniquely identifies the interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.
                           ieee8023MacTransmitted 1.3.6.1.4.1.11.2.4.1.1.1.2 counter read-only
The number of frames successfully transmitted.
                           ieee8023MacNotTransmitted 1.3.6.1.4.1.11.2.4.1.1.1.3 counter read-only
The number of frames not transmitted.
                           ieee8023MacDeferred 1.3.6.1.4.1.11.2.4.1.1.1.4 counter read-only
The number of frames deferred because the medium was busy.
                           ieee8023MacCollisions 1.3.6.1.4.1.11.2.4.1.1.1.5 counter read-only
Total number of transmit attempts that were retransmitted due to collisions. SunOS with Intel 82586 Ethernet driver - total number of collisions.
                           ieee8023MacSingleCollisions 1.3.6.1.4.1.11.2.4.1.1.1.6 counter read-only
Number of transmit attempts that are involved in a single collision and are subsequently transmitted successfully. SunOS - this is always 0.
                           ieee8023MacMultipleCollisions 1.3.6.1.4.1.11.2.4.1.1.1.7 counter read-only
Number of transmit attempts that are involved in between 2 and 15 collision attempts and are subsequently transmitted successfully. SunOS with Intel 82586 is always 0. SunOS with AMD 7990 LANCE driver - number of transmit attempts that are involved in between 1 and 15 collision attempts and are subsequently transmitted successfully.
                           ieee8023MacExcessCollisions 1.3.6.1.4.1.11.2.4.1.1.1.8 counter read-only
Number of transmit attempts that are involved in more than 15 collision attempts and are subsequently transmitted successfully. SunOS with Intel 82586 Ethernet driver - this is always 0.
                           ieee8023MacLateCollisions 1.3.6.1.4.1.11.2.4.1.1.1.9 counter read-only
Number of transmit attempts aborted because a collision occurred after the allotted channel time had elapsed.
                           ieee8023MacCarrierLostErrors 1.3.6.1.4.1.11.2.4.1.1.1.10 counter read-only
Number of times that carrier sense was lost when attempting to transmit.
                           ieee8023MacNoHeartBeatErrors 1.3.6.1.4.1.11.2.4.1.1.1.11 counter read-only
Number of times no heart beat was indicated after a transmission.
                           ieee8023MacFramesReceived 1.3.6.1.4.1.11.2.4.1.1.1.12 counter read-only
Number of frames successfully received.
                           ieee8023MacUndeliverableFramesReceived 1.3.6.1.4.1.11.2.4.1.1.1.13 counter read-only
Number of frames received that were not delivered because the software buffer was overrun when frames were sent faster than they could be received.
                           ieee8023MacCRCErrors 1.3.6.1.4.1.11.2.4.1.1.1.14 counter read-only
Number of Cyclical Redundancy Check (CRC) errors detected.
                           ieee8023MacAlignmentErrors 1.3.6.1.4.1.11.2.4.1.1.1.15 counter read-only
Number of frames received that were both misaligned and had bad CRC.
                           ieee8023MacResourceErrors 1.3.6.1.4.1.11.2.4.1.1.1.16 counter read-only
Number of frames received that were lost due to lack of resources.
                           ieee8023MacControlFieldErrors 1.3.6.1.4.1.11.2.4.1.1.1.17 counter read-only
Number of frames received with errors in the control field. SunOS - this is always 0.
                           ieee8023MacUnknownProtocolErrors 1.3.6.1.4.1.11.2.4.1.1.1.18 counter read-only
Number of frames dropped because the type field or sap field referenced an invalid protocol. SunOS - this is always 0.
                           ieee8023MacMulticastsAccepted 1.3.6.1.4.1.11.2.4.1.1.1.19 counter read-only
Number of accepted muliticast addresses.
           icmp 1.3.6.1.4.1.11.2.7
               icmpEchoReq 1.3.6.1.4.1.11.2.7.1 integer read-only
The number of milliseconds it takes for an ICMP echo request to respond. IcmpEchoReq is -1 if there is an internal error, -2 if the echo request timed out, -3 if the echo reply is not the correct reply, -4 if the packet size is too large, and -5 if the timeout is invalid. To request the ICMP response time for IP address a1.a2.a3.a4 with a timeout of t and a packet size of s, send a request for icmpEchoReq.s.t.a1.a2.a3.a4. For example, suppose one wanted to find out the number of milliseconds it took to ping 15.2.112.113, with time out of 8 seconds, and packet size of 75. Accordingly, icmpEchoReq.75.8.15.2.112.113 would identify the number of milliseconds. This MIB object is there only to provide for backward compatibility. A new MIB object is provided which does not violate the SNMP standards too, 'icmp.icmpEchoReqTable.icmpEchoReqEntry.icmpEchoReqTime'. This new MIB object is recommended to be used to achieve the same funtionality as provided by this (icmp.icmpEchoReq) MIB object.
               icmpEchoReqTable 1.3.6.1.4.1.11.2.7.2 no-access
A conceptual table holding the ICMP response times for various remote hosts. The table is a conceptual one in the sense that, the table actually contains no data. When a query for the table object icmpEchoReqTime is received by the agent an ICMP echo request is sent to the remote host, the ICMP echo reply is received, the elapsed time is calculated and is sent back as the response. Note that except the columnar object icmpEchoReqTime other objects in the table, viz., icmpEchoReqPktSize, icmpEchoReqTimeout and icmpEchoReqHost, have ACCESS previlege as not-accessible, those variables cannot be queried for. The table entries have the objects icmpEchoReqPktSize, icmpEchoReqTimeout and icmpEchoReqHost as the indices, which is effectively a way of transfering these required details to the agent, so that the agent could do its function and respond appropriately.
                   icmpEchoReqEntry 1.3.6.1.4.1.11.2.7.2.1 no-access
Each entry in the table icmpEchoReqTable is a conceptual one. See description of icmpEchoReqTable for more details.
                       icmpEchoReqTime 1.3.6.1.4.1.11.2.7.2.1.1 integer read-only
The elapsed time between the time the ICMP echo request is sent to the host identified by the index object icmpEchoReqHost and the time the ICMP echo reply is received at the agent host. The ICMP packet size and the time out to be used for the ICMP echo request are identified by the indices icmpEchoReqPktSize and icmpEchoReqTimeOut. See description of icmpEchoReqTable for more details. In other words, the number of milliseconds it takes for an ICMP echo request to respond. Other return values: -1 if there is an internal error, -2 if the echo request timed out, -3 if the echo reply is not the correct reply, -4 if the packet size is too large, and -5 if the timeout is invalid. To request the ICMP response time for IP address a1.a2.a3.a4 with a timeout of t and a packet size of s, send a request for icmpEchoReqTime.s.t.a1.a2.a3.a4. For example, suppose one wanted to find out the number of milliseconds it took to ping 15.2.112.113, with time out of 8 seconds, and packet size of 75. Accordingly, icmpEchoReqTime.75.8.15.2.112.113 would identify the number of milliseconds.
                       icmpEchoReqPktSize 1.3.6.1.4.1.11.2.7.2.1.2 integer no-access
The packet size to be used for the ICMP echo request, see description of icmpEchoReqTable for more details. The object serves as the first index out of three indices used when the object icmpEchoReqTime is queried. Note that this object's value cannot be queried for, this object serves as an input to the agent itself and a query for this object makes no sense.
                       icmpEchoReqTimeOut 1.3.6.1.4.1.11.2.7.2.1.3 integer no-access
The time period in seconds to wait for an ICMP echo reply message after an ICMP echo request is sent to the identified host, see description of icmpEchoReqTable for more details. The object serves as the second index out of three indices used when the object icmpEchoReqTime is queried. Note that this object's value cannot be queried for, this object serves as an input to the agent itself and a query for this object makes no sense.
                       icmpEchoReqHost 1.3.6.1.4.1.11.2.7.2.1.4 ipaddress no-access
The host to which the ICMP echo request is to be sent, the ping time between the host identified by this index object and the agent's host is what is queried for, see description of icmpEchoReqTable for more details. The object serves as the last index out of three indices used when the object icmpEchoReqTime is queried. Note that this object's value cannot be queried for, this object serves as an input to the agent itself and a query for this object makes no sense.
           snmp 1.3.6.1.4.1.11.2.13
                 trap 1.3.6.1.4.1.11.2.13.1
                     trapDestinationNum 1.3.6.1.4.1.11.2.13.1.1 gauge read-only
The number of trap destinations.
                     trapDestinationTable 1.3.6.1.4.1.11.2.13.1.2 no-access
List of addresses to which the agent sends traps.
                         trapDestinationEntry 1.3.6.1.4.1.11.2.13.1.2.1 no-access
Each entry contains the address of a management station.
                             trapDestination 1.3.6.1.4.1.11.2.13.1.2.1.1 ipaddress read-write
Address to which the agent sends traps.
                 snmpdConf 1.3.6.1.4.1.11.2.13.2
                     snmpdConfRespond 1.3.6.1.4.1.11.2.13.2.1 integer read-write
The SNMP agent was configured to respond to all objects if snmpdConfRespond is true. HP-Internal use only. Enumeration: 'false': 2, 'true': 1.
                     snmpdReConfigure 1.3.6.1.4.1.11.2.13.2.2 integer read-write
The agent will re-configure itself if snmpdReConfigure is set to reset(1) Enumeration: 'reset': 1.
                     snmpdFlag 1.3.6.1.4.1.11.2.13.2.3 integer read-only
Indicates the capability of the agent. Enumeration: 'netwareproxy': 2, 'removetrap': 1.
                     snmpdLogMask 1.3.6.1.4.1.11.2.13.2.4 integer read-write
The agent's log mask.
                     snmpdVersion 1.3.6.1.4.1.11.2.13.2.5 integer read-only
The agent's version number.
                     snmpdStatus 1.3.6.1.4.1.11.2.13.2.6 integer read-write
Indicates the status of the agent. Setting the agent to down will kill it. Enumeration: 'down': 2, 'up': 1.
                     snmpdSize 1.3.6.1.4.1.11.2.13.2.7 integer read-only
The amount of memory the agent has allocated.
                     snmpdWhatString 1.3.6.1.4.1.11.2.13.2.9 displaystring read-only
The what string of the agent.
                 authfail 1.3.6.1.4.1.11.2.13.4
                     authFailTable 1.3.6.1.4.1.11.2.13.4.1 no-access
List of managers that caused an authentication failure. This list has a maximum size.
                         authFailEntry 1.3.6.1.4.1.11.2.13.4.1.1 no-access
Each entry contains the ip address of the management station.
                             authIpAddress 1.3.6.1.4.1.11.2.13.4.1.1.1 ipaddress read-only
The ip address of the management station that sent a request to the agent with an incorrect community name.
                             authTime 1.3.6.1.4.1.11.2.13.4.1.1.2 timeticks read-only
The time since the agent received the un-authenticated request.
                             authCommunityName 1.3.6.1.4.1.11.2.13.4.1.1.3 octet string read-only
The community name used in the request
           openView 1.3.6.1.4.1.11.2.17
                 hpOpenView 1.3.6.1.4.1.11.2.17.1
                 openViewTrapVars 1.3.6.1.4.1.11.2.17.2
                     openViewSourceId 1.3.6.1.4.1.11.2.17.2.1 integer no-access
The identifier of the software generating the trap/event. This number is used by HP OpenView software when it sends an event to the OpenView event system. It identifies which software component sent the event. This object cannot be retrieved from the SNMP agent.
                     openViewSourceName 1.3.6.1.4.1.11.2.17.2.2 octet string no-access
The source of the event (may not be the machine upon which the event was generated). This string is used by HP OpenView software when it sends an event. It identifies for which source (node) the event is generated. This object cannot be retrieved from the SNMP agent.
                     openViewObjectId 1.3.6.1.4.1.11.2.17.2.3 octet string no-access
The OpenView object identifier associated with the source of the trap/event. This object cannot be retrieved from the SNMP agent.
                     openViewData 1.3.6.1.4.1.11.2.17.2.4 octet string no-access
Any miscellaneous data sent with an OpenView trap/event. This object cannot be retrieved from the SNMP agent.
                     openViewSeverity 1.3.6.1.4.1.11.2.17.2.5 octet string no-access
The OpenView event severity associated with the trap/event. This object cannot be retrieved from the SNMP agent.
                     openViewCategory 1.3.6.1.4.1.11.2.17.2.6 octet string no-access
The OpenView event category associated with the trap/event. This object cannot be retrieved from the SNMP agent.
                     openViewFilter 1.3.6.1.4.1.11.2.17.2.7 octet string no-access
The event filter for an application connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
                     openViewEntity 1.3.6.1.4.1.11.2.17.2.8 octet string no-access
The entity (string name) of an application connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
                     openViewAddress 1.3.6.1.4.1.11.2.17.2.9 octet string no-access
The IP address of the node from where an application is connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.
                     openViewPid 1.3.6.1.4.1.11.2.17.2.10 octet string no-access
The process ID of an application connecting to the OpenView event system. This object cannot be retrieved from the SNMP agent.