HP-SYSTEM-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-SYSTEM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HP-BASE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hpProcurveSystem 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1
This MIB module describes objects for basic management of devices in the HP Procurve product line.
     hpSystemTraps 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0
         fanDown 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.1
A fanDown trap signifies that hpFanOperational has detected an event where the fan is not operating.
         fanUp 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.2
A fanUp trap signifies that hpFanOperational has detected an event where the fan is now operating.
         temperatureAlarm 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.3
A temperatureAlarm signifies that the SNMP entity, acting in an agent role, has detected that the hpCpuTemperature has a value that exceeds acceptable tolerances (i.e. it is too hot or too cold).
         hpFailover 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.4
A hpFailover signifies that the SNMP entity, acting in an agent role, has detected that the standby system in a primary, redundant operation has become the primary system. This notification will only be sent by what was formerly the standby system.
         hpDistributionEvent 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.5
A hpDistributionEvent signifies that the SNMP entity, acting in an agent role, has detected that the central entity in a distributed system has triggered a distribution event of hpDistributionType.
         hpAdminAuthFailure 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.0.6
A hpAdminAuthFailure signifies that the SNMP entity, acting in an agent role, has detected that someone at the address reported by hpAdminIpAddress has failed to authenticate to the device via the administrative interface.
     hpProcurveSysMib 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1
         hpProductDescription 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.1 octet string read-only
Textual Description of the HW product
         hpProductHWVersion 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.2 octet string read-only
HW version of the product
         hpProductSWVersion 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.3 octet string read-only
SW version of the product
         hpProductSerialNumber 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.4 octet string read-only
Serial Number of the product
         hpProductLastChange 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.5 octet string read-only
Date and time of last configuration change
         hpCpuTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.6 octet string read-only
Current temperature in degrees centigrade of the CPU.
         hpPowerSupplyTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.7 octet string read-only
Current temperature in degrees centigrade of the power supply.
         hpChassisTemperature 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.8 octet string read-only
Current temperature in degrees centigrade of the mother board. Note: this is not the ambient temperature of the box.
         hpFanStatusTable 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9 no-access
Table of operational status of all internal cooling fans.
             hpFanStatusEntry 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1 no-access
Entry in table of all internal cooling fans.
                 hpFanNumber 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.1 integer read-only
Identifier of cooling fan, numbered to represent what hardware the fan is supposed to be cooling. Enumeration: 'cp': 1, 'power': 2.
                 hpFanOperational 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.2 integer read-only
Operational status of a cooling fan. Enumeration: 'false': 2, 'true': 1.
                 hpFanSpeed 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.1.9.1.3 integer32 read-only
Speed of the fan in RPM.
     hpSystemMIBObjects 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2
         hpConfig 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1
             hpName 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.2 displaystring read-write
A textual string containing information about the device. For instance, this string reflects the setting of the HP J8162A XL Access Controller Module Name available on the Administrative Web based User Interface. If no HP J8162A XL Access Controller Module name is entered, this object contains a zero-length string.
             hpSystemID 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.3 octet string read-only
The unique identifier for this device, as used by this system, or a master controlling system. For instance, an HP J8162A XL Access Controller Module would report the systemID used by the Access Control Server 740wl to uniquely identify this device.
             hpState 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.4 integer read-only
The current state of the device. A HP ProCurve Networking Business device can be configured for standalone operation, Failover (ie with a redundant peer), or for Distribution of configuration from a controlling central system to remote entities. unknown(1) - system Configuration status unknown up(2) - a standalone system is operational. down(3) - a system is not operational. primary(4) - system is running as the primary in a Failover peer configuration. secondary(5) - system is running as the backup in a Failover peer configuration. Enumeration: 'down': 3, 'unknown': 1, 'secondary': 5, 'up': 2, 'primary': 4.
             hpDistributionType 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.5 integer read-only
The most recent distribution event type on a device. This object will change dynamically based on the most recently triggered distribution event. unknown(1) - the distribution event type none(2) - no distribution event has occurred rightsPush(3) - the central Access Control Server 740wl has triggered a rights push event to remote Access Control Server 740wls. Enumeration: 'unknown': 1, 'rightsPush': 2.
             hpDistributionStatus 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.6 integer read-only
The most recent distribution event on a device. This object will change dynamically based on the most recently triggered distribution event. unknown(1) - the distribution event status unknown succeeded(2) - no distribution event has succeeded failed(3) - the distribution event failed for some reason. Enumeration: 'unknown': 1, 'succeeded': 2, 'failed': 3.
             hpIpAddress 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.7 ipaddress read-write
The administratively assigned IP address associated with the device. This can be assigned statically on the device Console port, or configured via DHCP.
             hpPeerIpAddress 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.8 ipaddress read-write
The administratively assigned IP address associated with a redundant peer device, configured to work with this device for failover purposes. This can be assigned statically on the device Console port, or configured via DHCP. If the device does not support Failover configuration, or none has been configured, this object will report 0.0.0.0
             hpTechSupportEnabled 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.9 truthvalue read-write
This object contains the current setting for the technical support access to the device. A value of true(1) indicates the Technical Support Access has been enabled. A value of false(2) indicates this access has been disabled. Note this object should only report true(2) if HP ProCurve Networking Business Technical Support staff have requested this access to the HP J8162A XL Access Controller Module for troubleshooting purposes.
             hpFailedAdminIpAddress 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.1.10 ipaddress read-only
The IP address associated with the last failed authentication to the Administrative UI. If no Administrator had failed authentication, this object will report 0.0.0.0
         hpStatus 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2
             hpNumAccessControllers 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.1 unsigned32 read-only
The number of HP J8162A XL Access Controller Modules known to this system. If this system is an HP J8162A XL Access Controller Module, this value will be 1. Otherwise, this value will be the number of HP J8162A XL Access Controller Modules this system is connected to (i.e. An Access Control Server 740wl connects to multiple HP J8162A XL Access Controller Module's).
             hpNumClients 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.2.2 gauge32 read-only
The total number of active authenticated or unauthenticated clients known to this system. If this device is an HP J8162A XL Access Controller Module, then this object reports the aggregated number of clients across all ports. If this device is a Access Control Server 740wl, it reports all Clients aggregated across all HP J8162A XL Access Controller Modules known to this system.
         hpNotificationsConfig 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3
             hpFailoverNotificationEnabled 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.1 truthvalue read-write
This object controls whether a hpFailover notification will be sent in the event of a failover occurrence between a primary and standby system. By default this object is set to false(2) for all systems.
             hpDistributionNotificationEnabled 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.2 truthvalue read-write
This object controls whether a hpDistribution notification will be sent in the event of a distribution event between a central and remote systems. By default this object is set to false(2) for all systems.
             hpAdminAuthFailureNotificationEnabled 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.2.3.3 truthvalue read-write
This object controls whether a hpAdminAuthFailure notification will be sent in the event of a failed authentication attempt at the administrator login.
     hpSystemMIBConformance 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3
         hpCompliances 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1
             hpSystemMIBCompliance1 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.1.1
The compliance statement for entities which implement the HP-SYSTEM-MIB.
         hpGroups 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2
             hpSystemGroup 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.1
A collection of objects providing system information applicable to all devices.
             hpEnvGroup 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.2
A collection of objects providing environmental information applicable to all devices.
             hpConfigGroup 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.3
A collection of objects providing configuration information applicable to all devices.
             hpStatusGroup 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.4
A collection of objects providing statistics applicable to all HP J8162A XL Access Controller Module like devices.
             hpNotificationsConfigGroup 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.5
A collection of objects providing notification configuration information applicable to all devices.
             hpNotificationsGroup 1.3.6.1.4.1.11.2.3.7.11.17.7.1.1.3.2.6
notifications for primary failover, and authorization failures, applicable to all devices.