HP-SN-VSRP-MIB: View SNMP OID List / Download MIB

VENDOR: HEWLETT-PACKARD


 Home MIB: HP-SN-VSRP-MIB
Download as:   
HP-SN-SWITCH-GROUP-MIB, SNMPv2-CONF, SNMPv2-TC, SNMPv2-SMI

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 snVsrpGlobal 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1
     snVsrpGroupOperModeVsrp 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.1 integer read-write
The VSRP is configured on this system either enabled or disabled and thedefault is disabled mode. disabled(0)..........disable VSRP enabled(1)...........activate VSRP Enumeration: 'disabled': 0, 'enabled': 1.
     snVsrpIfStateChangeTrap 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.2 integer read-write
Indicates whether the SNMP agent process is permitted to generate VSRP interface state change traps. Enumeration: 'disabled': 0, 'enabled': 1.
     snVsrpIfMaxNumVridPerIntf 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.3 integer read-only
Indicates the maximum number of VRID per interface.
     snVsrpIfMaxNumVridPerSystem 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.4 integer read-only
Indicates the maximum number of VRID per system.
     snVsrpClearVrrpStat 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.1.5 integer read-write
Clear VSRP statistics command. Enumeration: 'clear': 1, 'normal': 0.
 snVsrpIfIntf 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2
     snVsrpIfTable 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1 no-access
The VSRP Interface Table describes the interfaces from the viewpoint of VSRP.
         snVsrpIfEntry 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1 no-access
The VSRP Interface Entry describes one interface from the viewpoint of VSRP.
             snVsrpIfVlanId 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.1 integer read-only
Vlan index.
             snVsrpIfAuthType 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.2 integer read-write
The authentication type of this interface. Enumeration: 'ipAuthHeader': 2, 'noAuth': 0, 'simpleTextPasswd': 1.
             snVsrpIfAuthPassword 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.2.1.1.3 octet string read-write
The simple text password is allowed if only if the snVsrpIfAuthType type is simpleTextPasswd.
 snVsrpVirRtr 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3
     snVsrpVirRtrTable 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1 no-access
The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
         snVsrpVirRtrEntry 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1 no-access
The vsrp virtual router Entry describes one virtual router from the viewpoint of vsrp.
             snVsrpVirRtrVlanId 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.1 integer read-only
Vlan index.
             snVsrpVirRtrId 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.2 integer read-only
One of the virtual router ID of this vsrp interface.
             snVsrpVirRtrOwnership 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.3 integer read-write
The ownership of this vsrp router interface can be set to backup(2). VirRtr SNMP-GET returns incomplete(0), it means no IP address has assigned to this vsrp router interface. Enumeration: 'owner': 1, 'backup': 2, 'incomplete': 0.
             snVsrpVirRtrCfgPriority 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.4 integer read-write
The higher the number the higher the priority is. This parameter decides which backup router should becomes the Active Router for the interface. A backup Router with higher priority selected to becomes the Active Router. Therefore, this Object can be set if only if snVsrpVirRtrOwnership is set to backup(2).
             snVsrpVirRtrTrackPriority 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.5 integer read-write
The higher the number the higher the priority is. after this object is configured, the snVsrpVirRtrCurrPriority of this interface will be adjusted dynamically with this track priority when the Track Port states first changes from UP to DOWN.
             snVsrpVirRtrCurrPriority 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.6 integer read-only
The higher the number the higher the priority is. This object will be adjusted dynamically with the track priority when the Track Port states first changes from UP to DOWN.
             snVsrpVirRtrHelloInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.7 integer read-write
Time interval between advertisements (seconds).
             snVsrpVirRtrDeadInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.8 integer read-write
Dead interval (seconds).
             snVsrpVirRtrPreemptMode 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.9 integer read-write
This mode controls whether a higher priority Backup router preempts a lower priority Master. The mode with enabled(1) allow preemption and disabled(0) prohibit preemption. Enumeration: 'disabled': 0, 'enabled': 1.
             snVsrpVirRtrState 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.10 integer read-only
This object specifies the vsrp Router's interface state as: init(0)...initialization state. master(1)...master state. backup(2)...backup state. Enumeration: 'backup': 2, 'init': 0, 'master': 1.
             snVsrpVirRtrIpAddrMask 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.11 octet string read-write
The numbers of IP Addresses of this virtual router of this interface, this holds good for L3 vsrp.
             snVsrpVirRtrActivate 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.12 integer read-write
This object specifies the vsrp Router's activate command as: disabled(0)...deactivate this vsrp Router. enabled(1)....activate this vsrp Router. Enumeration: 'disabled': 0, 'enabled': 1.
             snVsrpVirRtrTrackPortList 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.13 octet string read-write
This object specifies the identity of the physical port and virtual ports whose state is to be monitored. Each port index is an ifIndex, if there are consecutive 4 or more ifIndex then they will be encoded like below. Encoding and decoding scheme is range based: Each range prefix with 0000 (2 octets) where 0000 is not valid ifIndex. Next 2 octets indicates lower range ifIndex, followed by 2 octets of higher range ifIndex. Individual(non range) ones will be displayed as it is. Ex: port list: 0001..0005 0015 0032..0047 Port list in PDU: 0000 0001 0005 000f 0000 0020 002f. If this object is configured then the Preference Level of this interface will be adjusted dynamically depending on the state of the Track Port. The interface's Preference Level is reduced by value of Preference Level parameter when the Track Port states first changes from UP to DOWN. When the Track Port next comes up the interface's Preference Level is increased by the amount specified by the Preference Level. The router VSRP physical track port membership.
             snVsrpVirRtrAdvertiseBackup 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.14 integer read-write
Set Advertise this backup router to master Enumeration: 'disabled': 0, 'enabled': 1.
             snVsrpVirRtrHoldDownInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.15 integer read-write
VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
             snVsrpVirRtrInitTtl 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.16 integer read-write
VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network
             snVsrpVirRtrIncPortList 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.17 octet string read-write
Include all free ports of the VLAN into its control ports
             snVsrpVirRtrSave 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.18 integer read-write
Set VSRP to save current parameters value Enumeration: 'disabled': 0, 'enabled': 1.
             snVsrpVirRtrBackupInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.19 integer read-write
Time interval between backup routers hello message advertisements (seconds).
             snVsrpVirRtrRowStatus 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.20 integer read-write
This object is used to create and delete row in the table and control if they are used. The values that can be written are: delete(3)...deletes the row create(4)...creates a new row modify(5)...modifies an existing row VirRtr the row exists, then a SET with value of create(4) returns error 'badValue'. Deleted rows go away immediately. The following values can be returned on reads: noSuch(0)...no such row invalid(1)...Setting it to 'invalid' has the effect of rendering it inoperative.. valid(2)....the row exists and is valid Enumeration: 'create': 4, 'valid': 2, 'modify': 5, 'invalid': 1, 'delete': 3.
             snVsrpVirRtrRxArpPktDropCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.21 counter read-only
The received vsrp ARP Packet Drop Counts.
             snVsrpVirRtrRxIpPktDropCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.22 counter read-only
The received VSRP IP Packet Drop Counts.
             snVsrpVirRtrRxPortMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.23 counter read-only
The received vsrp Port mismatching Counts.
             snVsrpVirRtrRxNumOfIpMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.24 counter read-only
The received VSRP Number of IP Addresses mismatching Counts.
             snVsrpVirRtrRxIpMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.25 counter read-only
The received vsrp IP Address mismatching Counts.
             snVsrpVirRtrRxHelloIntMismatchCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.26 counter read-only
The counts of the virtual router interface with hello interval mismatch counts.
             snVsrpVirRtrRxPriorityZeroFromMasterCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.27 counter read-only
The counts of the virtual router interface with Priority zero from the master.
             snVsrpVirRtrRxHigherPriorityCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.28 counter read-only
The counts of the virtual router interface with higher Priority.
             snVsrpVirRtrTransToMasterStateCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.29 counter read-only
The counts of the virtual router interface transition to master state.
             snVsrpVirRtrTransToBackupStateCnts 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.30 counter read-only
The counts of the virtual router interface transition to backup state.
             snVsrpVirRtrCurrDeadInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.31 integer read-only
Current Dead interval (in 100 milliseconds).
             snVsrpVirRtrCurHelloInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.32 integer read-only
Set backup router hello interval
             snVsrpVirRtrCurHoldDownInt 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.33 integer read-only
VSRP protection mechanism, an extra delay for a switch in backup mode to upgrade itself to master mode
             snVsrpVirRtrCurInitTtl 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.34 integer read-only
VSRP:TTL in the hello packet to regulate the distance that a hello packet can travel. It prevents the flooding of VSRP hello packets in the network
             snVsrpVirRtrHelloMacAddress 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.35 macaddress read-only
Hello MAC address.
             snVsrpVirRtrMasterIpAddr 1.3.6.1.4.1.11.2.3.7.11.12.1.3.21.3.1.1.36 ipaddress read-only
The master router's real/virtual (primary) IP address. This is the IP address listed as the source in vsrp advertisement last received by this virtual router.