HM2-PLATFORM-MULTICAST-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HM2-PLATFORM-MULTICAST-MIB
Download as:   
SNMPv2-CONF, IF-MIB, HM2-TC-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, MGMD-STD-MIB, PIM-BSR-MIB, PIM-STD-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hm2PlatformMulticast 1.3.6.1.4.1.248.12.4
The Hirschmann Private Platform2 MIB for Layer3 Multicast. Copyright (C) 2013. All Rights Reserved.
     hm2AgentMulticastIGMPConfigGroup 1.3.6.1.4.1.248.12.4.1
         hm2AgentMulticastIGMPAdminMode 1.3.6.1.4.1.248.12.4.1.1 hmenabledstatus read-write
This enables or disables IGMP on the system.
         hm2AgentMulticastIGMPProxyOperStatus 1.3.6.1.4.1.248.12.4.1.249 hmenabledstatus read-only
The operating status of IGMP proxy on this device.
     hm2AgentMulticastPIMSMConfigGroup 1.3.6.1.4.1.248.12.4.3
         hm2AgentMulticastPIMSMAdminMode 1.3.6.1.4.1.248.12.4.3.1 hmenabledstatus read-write
This enables or disables PIM Sparse Mode on the system.
         hm2AgentPIMBsrCandidateConfTable 1.3.6.1.4.1.248.12.4.3.4 no-access
Provides Candidate-BSR-Advertisements interval information.
             hm2AgentPIMBsrCandidateConfEntry 1.3.6.1.4.1.248.12.4.3.4.1 no-access
Information about a table entry.
                 pimBsrCandidateBSRAdvInterval 1.3.6.1.4.1.248.12.4.3.4.1.1 unsigned32 read-write
A Candidate BSR generates Candidate-BSR-Advertisements periodically. This object represents the time interval in seconds between two consecutive advertisements.
         hm2AgentMulticastPIMSMGroupMappingTable 1.3.6.1.4.1.248.12.4.3.249 no-access
The (conceptual) table listing BSR-specific information about PIM group mappings learned via C-RP advertisements or created locally using configurations.
                 hm2AgentMulticastPIMSMGroupMappingEntry 1.3.6.1.4.1.248.12.4.3.249.1 no-access
An entry (conceptual row) in the hm2AgentMulticastPIMSMGroupMappingTable.
                     hm2AgentMulticastPIMSMGroupMappingGrpAddrType 1.3.6.1.4.1.248.12.4.3.249.1.1 inetaddresstype no-access
The Inet address type of the IP multicast group prefix.
                     hm2AgentMulticastPIMSMGroupMappingGrpAddr 1.3.6.1.4.1.248.12.4.3.249.1.2 inetaddress no-access
The IP multicast group address that, when combined with hm2AgentMulticastPIMSMGroupMappingGrpPrefixLen, gives the group prefix for this mapping. The InetAddressType is given by the hm2AgentMulticastPIMSMGroupMappingGrpAddrType object.
                     hm2AgentMulticastPIMSMGroupMappingRPAddrType 1.3.6.1.4.1.248.12.4.3.249.1.3 inetaddresstype read-only
The Inet address type of the RP address.
                     hm2AgentMulticastPIMSMGroupMappingRPAddr 1.3.6.1.4.1.248.12.4.3.249.1.4 inetaddress read-only
The IP address of the RP to be used for the given group. The InetAddressType is given by the hm2AgentMulticastPIMSMGroupMappingRPAddrType object.
                     hm2AgentMulticastPIMSMGroupMappingOrigin 1.3.6.1.4.1.248.12.4.3.249.1.5 pimgroupmappingorigintype read-only
The mechanism by which the RP for the group was learned.
                     hm2AgentMulticastPIMSMGroupMappingGrpPrefixLen 1.3.6.1.4.1.248.12.4.3.249.1.6 inetaddressprefixlength read-only
The multicast group prefix length that, when combined with hm2AgentMulticastPIMSMGroupMappingGrpAddr, gives the group prefix for this mapping. If hm2AgentMulticastPIMSMGroupMappingGrpAddrType is 'ipv4' or 'ipv4z', this object must be in the range 4..32. If hm2AgentMulticastPIMSMGroupMappingGrpAddrType is 'ipv6' or 'ipv6z', this object must be in the range 8..128.
                     hm2AgentMulticastPIMSMGroupMappingExpiryTime 1.3.6.1.4.1.248.12.4.3.249.1.7 timeticks read-only
The minimum time remaining before this entry will be aged out. The value zero indicates that this entry will never be aged out.
     hm2AgentMulticastPIMDMConfigGroup 1.3.6.1.4.1.248.12.4.4
         hm2AgentMulticastPIMDMAdminMode 1.3.6.1.4.1.248.12.4.4.1 hmenabledstatus read-write
This enables or disables PIM Dense Mode on the system.
         hm2AgentMulticastPIMDMPruneAssertHoldtime 1.3.6.1.4.1.248.12.4.4.248 unsigned32 read-write
The value inserted into the Holdtime field of a PIM-DM Prune message sent on any interface.
     hm2AgentMulticastRoutingConfigGroup 1.3.6.1.4.1.248.12.4.5
         hm2AgentMulticastRoutingAdminMode 1.3.6.1.4.1.248.12.4.5.1 hmenabledstatus read-write
This enables or disables Multicast Routing Mode on the system.
         hm2AgentMulticastSoftwareDSCP 1.3.6.1.4.1.248.12.4.5.248 unsigned32 read-write
Configures the DSCP value that is written into multicast packets that are routed in software. If set to 64, the DSCP value of incoming packets is not changed.
     hm2AgentMulticastDVMRPConfigGroup 1.3.6.1.4.1.248.12.4.6
         hm2AgentMulticastDVMRPAdminMode 1.3.6.1.4.1.248.12.4.6.1 hmenabledstatus read-write
This enables or disables DVMRP on the system.
         hm2AgentMulticastDVMRPRouteExpiryTime 1.3.6.1.4.1.248.12.4.6.248 unsigned32 read-write
TBD.
     hm2AgentSnmpTrapFlagsConfigGroupMulticast 1.3.6.1.4.1.248.12.4.7
         hm2AgentSnmpDVMRPTrapFlag 1.3.6.1.4.1.248.12.4.7.1 hmenabledstatus read-write
This enables or disables DVMRP Traps on the system.
         hm2AgentSnmpPIMTrapFlag 1.3.6.1.4.1.248.12.4.7.2 hmenabledstatus read-write
This enables or disables PIM Traps on the system.
     hm2AgentIpStaticMRouteTable 1.3.6.1.4.1.248.12.4.8 no-access
The table listing the Static Multicast Route Entries.
         hm2AgentIpStaticMRouteEntry 1.3.6.1.4.1.248.12.4.8.1 no-access
Information about a table entry.
             hm2AgentIpStaticMRouteSrcAddressType 1.3.6.1.4.1.248.12.4.8.1.1 inetaddresstype no-access
The address type of this Multicast data source.
             hm2AgentIpStaticMRouteSrcIpAddr 1.3.6.1.4.1.248.12.4.8.1.2 inetaddress no-access
The address of the Multicast data source.
             hm2AgentIpStaticMRouteSrcNetMask 1.3.6.1.4.1.248.12.4.8.1.3 integer32 no-access
The network mask for the IP address of the Multicast data source.
             hm2AgentIpStaticMRouteRpfIpAddr 1.3.6.1.4.1.248.12.4.8.1.4 inetaddress read-only
The RPF Address. This object has been deprecated, because it has no address type. It is replaced by hm2AgentIpStaticMRouteExtRpfIpAddr.
             hm2AgentIpStaticMRouteIfIndex 1.3.6.1.4.1.248.12.4.8.1.5 interfaceindex read-only
The interface index is valid only for IPv6 and only if RPF address is link-local.
             hm2AgentIpStaticMRoutePreference 1.3.6.1.4.1.248.12.4.8.1.6 integer32 read-only
The preference of this route entry.
             hm2AgentIpStaticMRouteStatus 1.3.6.1.4.1.248.12.4.8.1.7 rowstatus read-only
The status of this row. The status object cannot be set to active(1) before a valid value has been written to hm2AgentIpStaticMRouteExtRpfIpAddr. All writeable objects in this entry can be modified when the status of this entry is active(1).
             hm2AgentIpStaticMRouteExtRpfIpAddrType 1.3.6.1.4.1.248.12.4.8.1.248 inetaddresstype read-only
The address type of the RPF Address.
             hm2AgentIpStaticMRouteExtRpfIpAddr 1.3.6.1.4.1.248.12.4.8.1.249 inetaddress read-only
The RPF Address.
     hm2AgentMulticastMgmdExtConfigGroup 1.3.6.1.4.1.248.12.4.250
             hm2AgentMulticastMgmdExtTable 1.3.6.1.4.1.248.12.4.250.10 no-access
The (conceptual) table listing the upstream interface of the router. This is also known as proxy interface.
                   hm2AgentMulticastMgmdExtEntry 1.3.6.1.4.1.248.12.4.250.10.1 no-access
An entry (conceptual row) representing the upstream interface of the router.
                       hm2AgentMulticastMgmdUnsolicitRprtInterval 1.3.6.1.4.1.248.12.4.250.10.1.1 unsigned32 read-write
Specify how often the system should send unsolicited reports to routers on the upstream interface.
                       hm2AgentMulticastMgmdNumberOfGroups 1.3.6.1.4.1.248.12.4.250.10.1.2 integer32 read-only
Number of groups corresponding to the proxy interface.
     hm2AgentMulticastMgmdHostCacheExtGroup 1.3.6.1.4.1.248.12.4.251
             hm2AgentMulticastMgmdHostCacheExtTable 1.3.6.1.4.1.248.12.4.251.10 no-access
The (conceptual) table listing group addresses of the upstream interface of the router.
                   hm2AgentMulticastMgmdHostCacheExtEntry 1.3.6.1.4.1.248.12.4.251.10.1 no-access
An entry (conceptual row) representing a group of upstream interface of the router.
                       hm2AgentMulticastMgmdHostStatus 1.3.6.1.4.1.248.12.4.251.10.1.1 integer read-only
A variable that describes the state of the host in relation with an IP multicast group. Enumeration: 'idle-member': 3, 'delay-member': 2, 'non-member': 1.
     hm2AgentMulticastSNMPExtensionGroup 1.3.6.1.4.1.248.12.4.260
             hm2AgentMulticastProtocolEnableErrorReturn 1.3.6.1.4.1.248.12.4.260.1
Cannot enable protocol x because protocol y is enabled.
             hm2AgentMulticastNullGroupErrorReturn 1.3.6.1.4.1.248.12.4.260.2
The group address or the group address mask is zero.
             hm2AgentMulticastBoundaryRangeEntriesErrorReturn 1.3.6.1.4.1.248.12.4.260.3
The group address is out of administratively scoped addresses range(239.x.x.x).
             hm2AgentMulticastHostEntriesErrorReturn 1.3.6.1.4.1.248.12.4.260.4
The group address has host bits set.
             hm2AgentMgmdHostInvalidEntryErrorReturn 1.3.6.1.4.1.248.12.4.260.5
The entry cannot be deleted because is not valid.
             hm2AgentMulticastProtocolDeInitErrorReturn 1.3.6.1.4.1.248.12.4.260.6
The multicast routing protocol is deinitializing. Please retry later.
             hm2AgentMulticastLocalAddressErrorReturn 1.3.6.1.4.1.248.12.4.260.7
The IP address is not local.
             hm2AgentMulticastCandRPErrorReturn 1.3.6.1.4.1.248.12.4.260.8
Candidate RP is already configured on another interface.
             hm2AgentMulticastUnicastValidationErrorReturn 1.3.6.1.4.1.248.12.4.260.9
The IP address is out of unicast range.
             hm2AgentMulticastGroupValidationErrorReturn 1.3.6.1.4.1.248.12.4.260.10
The group address is out of multicast range.
             hm2AgentMulticastSSMValidationErrorReturn 1.3.6.1.4.1.248.12.4.260.11
The group address is in SSM range.
             hm2AgentMulticastStaticSourceErrorReturn 1.3.6.1.4.1.248.12.4.260.12
Source address is a directly connected address.
             hm2AgentMulticastStaticRPFErrorReturn 1.3.6.1.4.1.248.12.4.260.13
The RPF address is a local address.
             hm2AgentMulticastStaticHostErrorReturn 1.3.6.1.4.1.248.12.4.260.14
The source IP address has the host bit set.
             hm2AgentMulticastCandRPPrimaryErrorReturn 1.3.6.1.4.1.248.12.4.260.15
The candidate RP address must be a primary IP address.
             hm2AgentMulticastCandBSRPrimaryErrorReturn 1.3.6.1.4.1.248.12.4.260.16
The candidate BSR address must be a primary IP address.