HIRSCHMANN-DISCOVERY-MGMT-MIB: View SNMP OID List / Download MIB

VENDOR: RICHARD HIRSCHMANN


 Home MIB: HIRSCHMANN-DISCOVERY-MGMT-MIB
Download as:   
SNMPv2-CONF, HIRSCHMANN-MGMT-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hmMgmtDiscoveryGroup 1.3.6.1.4.1.248.16.100
The Hirschmann generic discovery SNMP MIB. Copyright (C) 2014. All Rights Reserved.
         hmMgmtDiscoveryStatusGroup 1.3.6.1.4.1.248.16.100.1
             hmMgmtDiscMode 1.3.6.1.4.1.248.16.100.1.1 integer read-only
Operational mode of the protocol. Enumeration: 'read-write': 1, 'read-only': 2.
             hmMgmtDiscMacAddr 1.3.6.1.4.1.248.16.100.1.2 macaddress read-only
Physical base address (MAC address) of the agent. This is the burned in MAC address from the production.
             hmMgmtDiscIpIntfType 1.3.6.1.4.1.248.16.100.1.3 integer read-only
The interface which reports the ip settings. Enumeration: 'loopback-intf': 1, 'router-intf': 2, 'mgmt-intf': 3.
             hmMgmtDiscSwVersion 1.3.6.1.4.1.248.16.100.1.4 snmpadminstring read-only
Version of the currently running firmware.
             hmMgmtDiscProductDescr 1.3.6.1.4.1.248.16.100.1.5 snmpadminstring read-only
Manufacturer-defined product description.
         hmMgmtDiscoveryCfgGroup 1.3.6.1.4.1.248.16.100.2
             hmMgmtDiscCfgUUID 1.3.6.1.4.1.248.16.100.2.1 octet string read-write
The UUID of the device used for the discovery protocol.
             hmMgmtDiscCfgProto 1.3.6.1.4.1.248.16.100.2.2 integer read-write
The switch's network configuration protocol. The default value is dependent of the device type. Enumeration: 'dhcp': 3, 'none': 1, 'bootp': 2.
             hmMgmtDiscCfgIPAddrType 1.3.6.1.4.1.248.16.100.2.3 inetaddresstype read-write
Local IP address type.
             hmMgmtDiscCfgIPAddr 1.3.6.1.4.1.248.16.100.2.4 inetaddress read-write
IP address of the management agent board. Changing this value will take effect after activating with hmMgmtDiscCfgAction.
             hmMgmtDiscCfgPrefLen 1.3.6.1.4.1.248.16.100.2.5 inetaddressprefixlength read-write
The length of the IP netmask.
             hmMgmtDiscCfgGwIPAddrType 1.3.6.1.4.1.248.16.100.2.6 inetaddresstype read-write
Default gateway IP address type.
             hmMgmtDiscCfgGwIPAddr 1.3.6.1.4.1.248.16.100.2.7 inetaddress read-write
IP address of the default gateway. Changing this value will take effect after activating with hmMgmtDiscCfgAction.
             hmMgmtDiscCfgAction 1.3.6.1.4.1.248.16.100.2.8 integer read-write
This object, when read, always returns a value of other(1). Setting the object to activate(2) causes a reconfiguration of the IP protocol stack. Enumeration: 'other': 1, 'activate': 2.
             hmMgmtDiscCfgBlinking 1.3.6.1.4.1.248.16.100.2.9 integer read-write
Enables/disables the HiDiscovery blinking sequence on this device. This object will not be saved. Enumeration: 'enable': 1, 'disable': 2.