HIPATH-WIRELESS-HWC-MIB: View SNMP OID List / Download MIB

VENDOR: SIEMENS


 Home MIB: HIPATH-WIRELESS-HWC-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HIPATH-WIRELESS-SMI, IEEE802dot11-MIB, SNMPv2-TC, IPV6-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hiPathWirelessController 1.3.6.1.4.1.4329.15.3.2
     systemObjects 1.3.6.1.4.1.4329.15.3.2.1
         sysSoftwareVersion 1.3.6.1.4.1.4329.15.3.2.1.1 displaystring read-only
System software version.
         sysLogLevel 1.3.6.1.4.1.4329.15.3.2.1.2 logeventseverity read-write
Sets the level of events which are written to the system log.
         sysSerialNo 1.3.6.1.4.1.4329.15.3.2.1.3 octet string read-only
System serial number.
         sysLogSupport 1.3.6.1.4.1.4329.15.3.2.1.4
             hiPathWirelessAppLogFacility 1.3.6.1.4.1.4329.15.3.2.1.4.1 integer read-write
The application log facility level for syslog. Enumeration: 'local5': 5, 'local4': 4, 'local6': 6, 'local1': 1, 'local0': 0, 'local3': 3, 'local2': 2.
             serviceLogFacility 1.3.6.1.4.1.4329.15.3.2.1.4.2 integer read-write
The service log facility level for syslog. Enumeration: 'local5': 5, 'local4': 4, 'local6': 6, 'local1': 1, 'local0': 0, 'local3': 3, 'local2': 2.
             includeAllServiceMessages 1.3.6.1.4.1.4329.15.3.2.1.4.3 truthvalue read-write
Indicates if DHCP messages should also be forwarded to syslog.
             sysLogServersTable 1.3.6.1.4.1.4329.15.3.2.1.4.4 no-access
Table of syslog servers to forward logging messages.
                 sysLogServersEntry 1.3.6.1.4.1.4329.15.3.2.1.4.4.1 no-access
Configuration information for an external syslog server.
                     sysLogServerIndex 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.1 integer32 read-write
Table index for the syslog server.
                     sysLogServerEnabled 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.2 truthvalue read-write
Indicates if messages are to be sent to the syslog server.
                     sysLogServerIP 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.3 ipaddress read-write
syslog server IP address.
                     sysLogServerPort 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.4 integer32 read-write
syslog server port number.
                     sysLogServerRowStatus 1.3.6.1.4.1.4329.15.3.2.1.4.4.1.5 rowstatus read-write
RowStatus for operating on syslogServersTable.
         sysCPUType 1.3.6.1.4.1.4329.15.3.2.1.5 displaystring read-only
Wireless controller's CPU type
         apLogManagement 1.3.6.1.4.1.4329.15.3.2.1.6
             apLogCollectionEnable 1.3.6.1.4.1.4329.15.3.2.1.6.1 truthvalue read-write
If this field is set to true, then the AP log collection feature is enabled.
             apLogFrequency 1.3.6.1.4.1.4329.15.3.2.1.6.2 integer32 read-write
Number of log collections performed daily. The number must be one of the following 1, 2, 4, 6.
             apLogDestination 1.3.6.1.4.1.4329.15.3.2.1.6.3 integer read-write
Destination where the log file will be stored. If the local flash is not mounted, then you can not select 1. 0 : local memory. 1 : flash. 2 : remote location. Enumeration: 'remote': 2, 'flash': 1, 'local': 0.
             apLogFTProtocol 1.3.6.1.4.1.4329.15.3.2.1.6.4 integer read-write
File transfer protocol. This field has meaning only when apLogDestination is set to remote(2). 0 : ftp. 1 : scp. Enumeration: 'ftp': 0, 'scp': 1.
             apLogServerIP 1.3.6.1.4.1.4329.15.3.2.1.6.5 ipaddress read-write
The IP address of the remote server. This field has meaning only when apLogDestination is set to remote(2).
             apLogUserId 1.3.6.1.4.1.4329.15.3.2.1.6.6 displaystring read-write
The user ID that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2).
             apLogPassword 1.3.6.1.4.1.4329.15.3.2.1.6.7 displaystring read-write
The user password that is used for access to the remote server. This field has meaning only when apLogDestination is set to remote(2). This field can only be viewed in SNMPv3 mode with privacy.
             apLogDirectory 1.3.6.1.4.1.4329.15.3.2.1.6.8 displaystring read-write
The directory of the remote server. This field has meaning only when apLogDestination is set to remote(2).
             apLogSelectedAPsTable 1.3.6.1.4.1.4329.15.3.2.1.6.9 no-access
Table containing a list of APs for which log collection is supported.
                 apLogSelectedAPsEntry 1.3.6.1.4.1.4329.15.3.2.1.6.9.1 no-access
Configuration information of an AP which supports the AP log feature.
                     apSerialNo 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.1 octet string no-access
Table index for the apLogSelectedAPs. The AP's serial number serves as the index.
                     select 1.3.6.1.4.1.4329.15.3.2.1.6.9.1.2 truthvalue read-write
Indicates whether logs are collected from the AP.
             apLogQuickSelectedOption 1.3.6.1.4.1.4329.15.3.2.1.6.10 integer read-write
This is a quick select option for the user to perform the AP's bulk selection. This field is write-only and read access returns unknown(0) value. 0 : unknown. 1 : add all APs. 2 : add all local APs. 3 : add all foreign APs. 4 : remove all APs. 5 : remove all local APs. 6 : remove all foreign APs. Enumeration: 'removeAllLocal': 5, 'addAll': 1, 'unknown': 0, 'addAllForeign': 3, 'removeAll': 4, 'removeAllForeign': 6, 'addAllLocal': 2.
         apLogFileUtility 1.3.6.1.4.1.4329.15.3.2.1.7
             apLogFileUtilityLimit 1.3.6.1.4.1.4329.15.3.2.1.7.1 unsigned32 read-only
The maximum number of AP log file copy requests that can be held in the apLogFileCopyTable. A value of 0 indicates no configured limit.
             apLogFileUtilityCurrent 1.3.6.1.4.1.4329.15.3.2.1.7.2 gauge32 read-only
The number of AP log file copy requests currently in the apLogFileCopyTable.
             apLogFileCopyTable 1.3.6.1.4.1.4329.15.3.2.1.7.5 no-access
List of AP log file copy requests.
                 apLogFileCopyEntry 1.3.6.1.4.1.4329.15.3.2.1.7.5.1 no-access
An entry describing the AP log file copy request.
                     apLogFileCopyIndex 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.1 unsigned32 no-access
The index for this AP log file copy request.
                     apLogFileCopyDestination 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.2 integer read-write
Destination where the log file will be copied. If the local flash is not mounted, then you can not select 1. 1 : copy the local AP log file to flash. 2 : copy the local AP log file to remote server. Enumeration: 'flash': 1, 'remoteServer': 2.
                     apLogFileCopyProtocol 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.3 integer read-write
File transfer protocol to be used to copy the log file. 0 : ftp. 1 : scp. Enumeration: 'ftp': 0, 'scp': 1.
                     apLogFileCopyServerIP 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.4 ipaddress read-write
The IP address of the remote server.
                     apLogFileCopyUserID 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.5 displaystring read-write
The user ID that is used for access to the remote server.
                     apLogFileCopyPassword 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.6 displaystring read-write
The user password that is used for access to the remote server. This field can only be viewed in SNMPv3 mode with privacy.
                     apLogFileCopyServerDirectory 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.7 displaystring read-write
The directory on the remote server.
                     apLogFileCopyOperation 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.8 integer read-only
If this field is set to 1, then the controller will start to perform the copy action. Enumeration: 'start': 1.
                     apLogFileCopyOperationStatus 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.9 integer read-only
The operational state of the AP log file copy request. inactive - Indicates that the RowStatus of this conceptual row is not in the `active` state. pending - Indicates that the AP log file copy described by this row is ready to run and waiting in a queue. running - Indicates that the AP log file copy described by this row is running. success - Indicates that the AP log file copy described by this row has successfully run to completion. failure - Indicates that the AP log file copy described by this row has failed to run to completion. Enumeration: 'failure': 5, 'running': 3, 'inactive': 1, 'success': 4, 'pending': 2.
                     apLogFileCopyRowStatus 1.3.6.1.4.1.4329.15.3.2.1.7.5.1.10 rowstatus read-only
Row status variable for row operations on the apLogFileCopyTable.
     dnsObjects 1.3.6.1.4.1.4329.15.3.2.2
         primaryDNS 1.3.6.1.4.1.4329.15.3.2.2.1 ipaddress read-write
Primary DNS address configured in the Controller.
         secondaryDNS 1.3.6.1.4.1.4329.15.3.2.2.2 ipaddress read-write
Secondary DNS address configured in the Controller.
         tertiaryDNS 1.3.6.1.4.1.4329.15.3.2.2.3 ipaddress read-write
Third DNS address configured in the Controller.
     mgmtPortObjects 1.3.6.1.4.1.4329.15.3.2.3
         mgmtPortIfIndex 1.3.6.1.4.1.4329.15.3.2.3.1 integer32 read-only
ifIndex of the management port.
         mgmtPortHostname 1.3.6.1.4.1.4329.15.3.2.3.2 displaystring read-write
Hostname of the management port.
         mgmtPortDomain 1.3.6.1.4.1.4329.15.3.2.3.5 displaystring read-write
Domain of the management port.
     physicalPortObjects 1.3.6.1.4.1.4329.15.3.2.4
         physicalPortCount 1.3.6.1.4.1.4329.15.3.2.4.1 integer32 read-only
Number of rows in routerPortsTable.
         physicalPortsTable 1.3.6.1.4.1.4329.15.3.2.4.2 no-access
Table of router ports on the controller.
             physicalPortsEntry 1.3.6.1.4.1.4329.15.3.2.4.2.1 no-access
An entry in routerPortsTable.
                 portMgmtTrafficEnable 1.3.6.1.4.1.4329.15.3.2.4.2.1.1 truthvalue read-write
Determines whether controller management network traffic is allowed over this interface.
                 portDuplexMode 1.3.6.1.4.1.4329.15.3.2.4.2.1.2 integer read-write
Duplex mode for the esa ports. Enumeration: 'auto': 3, 'full': 1, 'half': 2.
                 portFunction 1.3.6.1.4.1.4329.15.3.2.4.2.1.3 integer read-write
Specifies the behavior of the EWC physical ports. Enumeration: 'router': 1, 'host': 2, 'thirdPartyAP': 3.
                 portEnabled 1.3.6.1.4.1.4329.15.3.2.4.2.1.4 integer read-write
If enabled, the interface administratively is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                 portName 1.3.6.1.4.1.4329.15.3.2.4.2.1.5 octet string read-only
A textual string containing information about the port.
                 portIpAddress 1.3.6.1.4.1.4329.15.3.2.4.2.1.6 ipaddress read-write
The IP address of this port.
                 portMask 1.3.6.1.4.1.4329.15.3.2.4.2.1.7 ipaddress read-write
The subnet mask associated with the IP address of this port.
                 portMacAddress 1.3.6.1.4.1.4329.15.3.2.4.2.1.8 macaddress read-only
Port's MAC address.
                 portVlanID 1.3.6.1.4.1.4329.15.3.2.4.2.1.9 integer32 read-write
External VLAN tag for the physical port for trasmitted and received packets. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value.
                 portDHCPEnable 1.3.6.1.4.1.4329.15.3.2.4.2.1.10 truthvalue read-write
If enabled, the controller is configured as default DHCP server for AP.
                 portDHCPGateway 1.3.6.1.4.1.4329.15.3.2.4.2.1.11 displaystring read-write
Gateway address to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
                 portDHCPDomain 1.3.6.1.4.1.4329.15.3.2.4.2.1.12 displaystring read-write
Domain name to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
                 portDHCPDefaultLease 1.3.6.1.4.1.4329.15.3.2.4.2.1.13 integer32 read-write
Default DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
                 portDHCPMaxLease 1.3.6.1.4.1.4329.15.3.2.4.2.1.14 integer32 read-write
Maximum DHCP lease time in seconds to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
                 portDHCPDnsServers 1.3.6.1.4.1.4329.15.3.2.4.2.1.15 displaystring read-write
List of DNSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
                 portDHCPWins 1.3.6.1.4.1.4329.15.3.2.4.2.1.16 displaystring read-write
List of WINSs to be supplied to the wireless clients if controller is configured as default DHCP server for AP.
         physicalPortsInternalVlanID 1.3.6.1.4.1.4329.15.3.2.4.3 integer32 read-write
Internal VLAN tag to be used for physical ports for which the exernal VLAN tag have not been configured. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value.
         physicalFlash 1.3.6.1.4.1.4329.15.3.2.4.4 integer read-only
Flash drive status. Enumeration: 'mounted': 1, 'unmounted': 2.
         phyDHCPRangeTable 1.3.6.1.4.1.4329.15.3.2.4.5 no-access
phyDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with physical ports.
             phyDHCPRangeEntry 1.3.6.1.4.1.4329.15.3.2.4.5.1 no-access
Configuration information for a DHCP range.
                 phyDHCPRangeIndex 1.3.6.1.4.1.4329.15.3.2.4.5.1.1 integer32 read-write
Index for the DHCP row element.
                 phyDHCPRangeStart 1.3.6.1.4.1.4329.15.3.2.4.5.1.2 ipaddress read-write
First IP address in the range.
                 phyDHCPRangeEnd 1.3.6.1.4.1.4329.15.3.2.4.5.1.3 ipaddress read-write
Last IP address in the range.
                 phyDHCPRangeType 1.3.6.1.4.1.4329.15.3.2.4.5.1.4 integer read-write
Determines whether addresses in the specified range will be included, or excluded by the DHCP server. Enumeration: 'exclusion': 2, 'inclusion': 1.
                 phyDHCPRangeStatus 1.3.6.1.4.1.4329.15.3.2.4.5.1.5 rowstatus read-write
Row status variable for row operations on the phyDHCPRangeTable
         layerTwoPortTable 1.3.6.1.4.1.4329.15.3.2.4.6 no-access
This table contains all layer two ports.
             layerTwoPortEntry 1.3.6.1.4.1.4329.15.3.2.4.6.1 no-access
Entry for a layer two port.
                 layerTwoPortName 1.3.6.1.4.1.4329.15.3.2.4.6.1.1 displaystring read-only
Text string identifying the port within the controller.
                 layerTwoPortMgmtState 1.3.6.1.4.1.4329.15.3.2.4.6.1.2 integer read-write
This value indicates administrator state of the port. Enumeration: 'disabled': 0, 'enabled': 1.
                 layerTwoPortMacAddress 1.3.6.1.4.1.4329.15.3.2.4.6.1.3 macaddress read-only
Port's MAC address.
         jumboFrames 1.3.6.1.4.1.4329.15.3.2.4.7 integer read-write
Enables support for frames up to 1800 bytes long. jumboFrames support only applies to the controller and compatible APs. Enumeration: 'disabled': 0, 'enabled': 1.
     vnManagerObjects 1.3.6.1.4.1.4329.15.3.2.5
         vnRole 1.3.6.1.4.1.4329.15.3.2.5.1 integer read-write
Specifies the role of this EWC in inter-EWC mobility. None indicates that mobile units cannot roam to or from this EWC. In any EWC cluster, only one EWC should be specified as vnMgr, all others should be have vnRole = vnAgent. Enumeration: 'vnAgent': 3, 'none': 1, 'vnMgr': 2.
         vnIfIndex 1.3.6.1.4.1.4329.15.3.2.5.2 integer32 read-write
ifIndex of the physical port where inter-EWC tunnels terminate. This field has meaning if vnRole is not none(1)
         vnHeartbeatInterval 1.3.6.1.4.1.4329.15.3.2.5.3 integer32 read-write
The time interval between inter-EWC polling messages. This field has meaning if vnRole is not none(1)
         vnLocalClients 1.3.6.1.4.1.4329.15.3.2.5.4 counter32 read-only
Number of locally associated clients to this controller that is considered to be their home controller in the mobility zone, which this controller is part of.
         vnForeignClients 1.3.6.1.4.1.4329.15.3.2.5.5 counter32 read-only
Number of clients that have registered with another controller in the mobility zone, which this controller is part of, and currently have roamed to this controller.
         vnTotalClients 1.3.6.1.4.1.4329.15.3.2.5.6 counter32 read-only
Number of local and foreign clients on this controller in the Mobility zone.
     ntpObjects 1.3.6.1.4.1.4329.15.3.2.6
         ntpEnabled 1.3.6.1.4.1.4329.15.3.2.6.1 truthvalue read-write
Enable or disables support for the Network Time Protocol (NTP).
         ntpTimezone 1.3.6.1.4.1.4329.15.3.2.6.2 displaystring read-write
Specifies the time zone where this EWC resides.
         ntpTimeServer1 1.3.6.1.4.1.4329.15.3.2.6.3 displaystring read-write
Primary NTP server.
         ntpTimeServer2 1.3.6.1.4.1.4329.15.3.2.6.4 displaystring read-write
Secondary NTP server.
         ntpTimeServer3 1.3.6.1.4.1.4329.15.3.2.6.5 displaystring read-write
Tertiary NTP server.
         ntpServerEnabled 1.3.6.1.4.1.4329.15.3.2.6.6 truthvalue read-write
Enable or disables support for controller as NTP server.
     controllerStats 1.3.6.1.4.1.4329.15.3.2.7
         tunnelsTxRxBytes 1.3.6.1.4.1.4329.15.3.2.7.1 counter64 read-only
Sum of transmitted and received bytes over all existing tunnels.
         tunnelCount 1.3.6.1.4.1.4329.15.3.2.7.6 integer32 read-only
Number of connections to other WirelessController controllers.
         tunnelStatsTable 1.3.6.1.4.1.4329.15.3.2.7.7 no-access
tunnelStatsTable contains a list of the IP tunnels connected to this EWC for use in inter-EWC mobility.
             tunnelStatsEntry 1.3.6.1.4.1.4329.15.3.2.7.7.1 no-access
Statistics for a mobility tunnel.
                 tunnelStartIP 1.3.6.1.4.1.4329.15.3.2.7.7.1.1 ipaddress read-write
IP address for the start of the tunnel.
                 tunnelStartHWC 1.3.6.1.4.1.4329.15.3.2.7.7.1.2 octet string read-write
Name of the access controller for the start of the tunnel.
                 tunnelEndIP 1.3.6.1.4.1.4329.15.3.2.7.7.1.3 ipaddress read-write
IP address for the end of the tunnel.
                 tunnelEndHWC 1.3.6.1.4.1.4329.15.3.2.7.7.1.4 octet string read-write
Name of the access controller for the end of the tunnel.
                 tunnelStatus 1.3.6.1.4.1.4329.15.3.2.7.7.1.5 integer read-write
Indicates if the mobility tunnel is up or down. Enumeration: 'connected': 2, 'disconnected': 1.
                 tunnelStatsTxBytes 1.3.6.1.4.1.4329.15.3.2.7.7.1.6 counter32 read-only
Number of bytes have been transmitted from the controller at the start of the tunnel to the controller on the other end of the tunnel.
                 tunnelStatsRxBytes 1.3.6.1.4.1.4329.15.3.2.7.7.1.7 counter32 read-only
Number of bytes have been received by the controller at the end of the tunnel from the controller at the start of the tunnel.
                 tunnelStatsTxRxBytes 1.3.6.1.4.1.4329.15.3.2.7.7.1.8 counter32 read-only
Sum of transmitted and received bytes over this tunnel.
         clearAccessRejectMsg 1.3.6.1.4.1.4329.15.3.2.7.8 integer read-write
Set this OID to one to erase the contents of the accessRejectMessage table. The OID always returns 0 when read. Enumeration: 'clear': 1.
         accessRejectMsgTable 1.3.6.1.4.1.4329.15.3.2.7.9 no-access
This table lists each of the reply messages returned in RADIUS Access-Reject messages and for each reply message, a count of the number of times it has been received.
             accessRejectMsgEntry 1.3.6.1.4.1.4329.15.3.2.7.9.1 no-access
One entry consisting of a unique Access-Reject Reply-Message (accessRejectReplyMessage) and count of this message.
                 armIndex 1.3.6.1.4.1.4329.15.3.2.7.9.1.1 integer32 no-access
A number uniquely identifying each conceptual row in the accessRejectMsgTable.
                 armCount 1.3.6.1.4.1.4329.15.3.2.7.9.1.2 counter64 read-only
Count of the number of times the controller has received an Access-Reject response from a RADIUS server that contained the associated armReplyMessage.
                 armReplyMessage 1.3.6.1.4.1.4329.15.3.2.7.9.1.3 displaystring read-only
A reply message attribute received by the controller from a RADIUS server in an Access-Reject message.
     availability 1.3.6.1.4.1.4329.15.3.2.8
         availabilityStatus 1.3.6.1.4.1.4329.15.3.2.8.1 integer read-write
This field can be used to enable or disable availability. If it is set to paired(1), then availability is enabled on this controller, otherwise it is considered that the controller operates in stand-alone mode. All other availability fields have no meaning if this field is set to standalone(0). Enumeration: 'paired': 1, 'standalone': 0.
         pairIPAddress 1.3.6.1.4.1.4329.15.3.2.8.2 ipaddress read-write
IP address of paired controller in availability pairing mode.
         hwcAvailabilityRank 1.3.6.1.4.1.4329.15.3.2.8.3 integer read-write
Rank of controller in Availability pairing mode. This is legacy field and applies to releases before 5.x and in current releases it is used for reporting only. Enumeration: 'primary': 2, 'notConfigured': 0, 'secondary': 1.
         fastFailover 1.3.6.1.4.1.4329.15.3.2.8.4 integer read-write
Enables or disables fast failover when controller operates in Availability pairing mode. Enumeration: 'disabled': 0, 'enabled': 1.
         detectLinkFailure 1.3.6.1.4.1.4329.15.3.2.8.5 unsigned32 read-write
Time to detect link failure between two controllers in availability pairing. The value can be set to values between 2-30 seconds
         synchronizeSystemConfig 1.3.6.1.4.1.4329.15.3.2.8.6 truthvalue read-write
If this flag is set to enabled then system configuration is synchronized between paired controllers operating in Availabilty pairing mode.
         synchronizeGuestPort 1.3.6.1.4.1.4329.15.3.2.8.7 truthvalue read-write
If this flag is set to enabled then Guest Portal user accounts are synchronized between paired controllers operating in Availabilty pairing mode.
     secureConnection 1.3.6.1.4.1.4329.15.3.2.9
         weakCipherEnable 1.3.6.1.4.1.4329.15.3.2.9.1 integer read-write
By default usage of weak cipher is enabled on EWC. Weak cipher can be disabled using this field. Enumeration: 'enable': 1, 'disable': 0.
     dashboard 1.3.6.1.4.1.4329.15.3.2.10
           licensingInformation 1.3.6.1.4.1.4329.15.3.2.10.1
               licenseRegulatoryDomain 1.3.6.1.4.1.4329.15.3.2.10.1.1 displaystring read-only
Regulatory domain that this wireless controller system has been licensed for to operate.
               licenseType 1.3.6.1.4.1.4329.15.3.2.10.1.2 integer read-only
Type of license for the controller. Temporary lincese allows controller to operate within defined number of days after which a permanent license is required for the operation of the controller system. Enumeration: 'permanent': 1, 'temporary': 2.
               licenseDaysRemaining 1.3.6.1.4.1.4329.15.3.2.10.1.3 unsigned32 read-only
Number of days is left for the temporary license to expire. This value has meaning if the license type is temporary(1).
               licenseAvailableAP 1.3.6.1.4.1.4329.15.3.2.10.1.4 unsigned32 read-only
If licenseMode is standAlone, this is the maximum number of APs that can be active on the controller without violating the licensing agreement. If licenseMode is availabilityPaired, this is the maximum number of APs that can be active on both members of the availability pair without violating the licensing agreement.
               licenseInServiceRadarAP 1.3.6.1.4.1.4329.15.3.2.10.1.5 unsigned32 read-only
If licenseMode is standalone this is the maximum number of APs that can be active on this controller and can operate as Guardians or in-service Radar APs without violating the licensing agreement. If licenseMode is availabilityPaired, this is the maximum number of APs that can be active on both members of the availability pair and can operate as Guardians or in-service Radar APs without violating the licensing agreement.
               licenseMode 1.3.6.1.4.1.4329.15.3.2.10.1.6 integer read-only
License mode determines how to interpret the license capacity OIDs. licenseMode is standalone if the controller is not part of an availability pair. licenseMode is availabilityPaired if the controller is part of an availability pair. Enumeration: 'availabilityPaired': 2, 'standAlone': 1.
               licenseLocalAP 1.3.6.1.4.1.4329.15.3.2.10.1.7 unsigned32 read-only
The total number of AP capacity licenses installed on this controller.
               licenseForeignAP 1.3.6.1.4.1.4329.15.3.2.10.1.8 unsigned32 read-only
The total number of AP capacity licenses installed on this controller's availability partner.
               licenseLocalRadarAP 1.3.6.1.4.1.4329.15.3.2.10.1.9 unsigned32 read-only
The total number of AP Radar capacity licenses installed on this controller.
               licenseForeignRadarAP 1.3.6.1.4.1.4329.15.3.2.10.1.10 unsigned32 read-only
The total number of AP Radar capacity licenses installed on this controller's availability partner.
           stationsByProtocol 1.3.6.1.4.1.4329.15.3.2.10.2
               stationsByProtocolA 1.3.6.1.4.1.4329.15.3.2.10.2.1 unsigned32 read-only
Number of stations using 802.11a mode to access the network.
               stationsByProtocolB 1.3.6.1.4.1.4329.15.3.2.10.2.2 unsigned32 read-only
Number of stations using 802.11b mode to access the network.
               stationsByProtocolG 1.3.6.1.4.1.4329.15.3.2.10.2.3 unsigned32 read-only
Number of stations using 802.11b mode to access the network.
               stationsByProtocolN24 1.3.6.1.4.1.4329.15.3.2.10.2.4 unsigned32 read-only
Number of stations using 802.11n mode with frequency of 2.4Gig to access the network.
               stationsByProtocolN5 1.3.6.1.4.1.4329.15.3.2.10.2.5 unsigned32 read-only
Number of stations using 802.11n mode with frequency of 5Gig to access the network.
               stationsByProtocolUnavailable 1.3.6.1.4.1.4329.15.3.2.10.2.6 unsigned32 read-only
The total number of stations with sessions on this controller for which the 802.11 protocol type (a, b, g, n, ac) for which the protocol could not be determined.
               stationsByProtocolError 1.3.6.1.4.1.4329.15.3.2.10.2.7 unsigned32 read-only
The total number of stations with sessions on this controller for which an AP reported an invalid (out of range) value as the station's 802.11 protocol type.
               stationsByProtocolAC 1.3.6.1.4.1.4329.15.3.2.10.2.8 unsigned32 read-only
Number of stations using 802.11ac mode to access the network.
           apByChannelTable 1.3.6.1.4.1.4329.15.3.2.10.3 no-access
List of aggregated access points that are operating on a specific wireless channels.
               apByChannelEntry 1.3.6.1.4.1.4329.15.3.2.10.3.1 no-access
An entry in this table for one wireless channel and aggregated access point on that channel.
                   apByChannelNumber 1.3.6.1.4.1.4329.15.3.2.10.3.1.1 unsigned32 no-access
The channel on which a set of access points are presently operating. If this number is 0, this means the AP is in Guardian mode or the AP's radios are turned off.
                   apByChannelAPs 1.3.6.1.4.1.4329.15.3.2.10.3.1.2 unsigned32 read-only
Total number of the access point on the channel that this row is indexed on.
 virtualNetworks 1.3.6.1.4.1.4329.15.3.3
     vnsConfigObjects 1.3.6.1.4.1.4329.15.3.3.1
         vnsCount 1.3.6.1.4.1.4329.15.3.3.1.1 integer32 read-only
Number of VNSes defined in vnsConfigTable.
         vnsConfigTable 1.3.6.1.4.1.4329.15.3.3.1.2 no-access
Contains definitions of the Virtual Network Segments defined on this WirelessController.
             vnsConfigEntry 1.3.6.1.4.1.4329.15.3.3.1.2.1 no-access
Configuration elements for a specific Virtual Network Segment.
                 vnsDescription 1.3.6.1.4.1.4329.15.3.3.1.2.1.1 displaystring read-write
Textual description of the VNS.
                 vnsAssignmentMode 1.3.6.1.4.1.4329.15.3.3.1.2.1.2 integer read-write
Determines the method by which mobile units are assigned an address within this VNS. If vnsAssignmentMode = ssid, any client with an SSID matching the VNS will be assigned an address from this VNS. If vnsAssignmentMode == aaa, then address assignment is not completed until after the user is authenticated. Enumeration: 'aaa': 2, 'ssid': 1.
                 vnsMUSessionTimeout 1.3.6.1.4.1.4329.15.3.3.1.2.1.3 integer32 read-write
Client session idle time out, in seconds.
                 vnsAllowMulticast 1.3.6.1.4.1.4329.15.3.3.1.2.1.4 truthvalue read-write
When true, allows IP multicast packets to be broadcast to the clients on this VNS.
                 vnsSSID 1.3.6.1.4.1.4329.15.3.3.1.2.1.5 displaystring read-write
Service Set Identifier (i.e. Network Name) that will be configured on the AccessPoints associated with this VNS.
                 vnsDomain 1.3.6.1.4.1.4329.15.3.3.1.2.1.6 displaystring read-write
Domain name to be supplied to the wireless clients if internal DHCP address assignment.
                 vnsDNSServers 1.3.6.1.4.1.4329.15.3.3.1.2.1.7 displaystring read-write
List of DNSs to be supplied to the wireless clients if internal DHCP address assignment.
                 vnsWINSServers 1.3.6.1.4.1.4329.15.3.3.1.2.1.8 displaystring read-write
List of WINSs to be supplied to the wireless clients if internal DHCP address assignment.
                 vnsAuthModel 1.3.6.1.4.1.4329.15.3.3.1.2.1.9 integer read-write
vnsAuthModel specifies the authentication method used for clients in the VNS. None indicates that the VNS is open, and no authentication is required. vnsAuthModel=captivePortal may only be specified for a VNS with vnsAssignmentMode=ssid. Likewise, vnsAuthModel=dot1X may only be specified for a VNS with vnsAssignmentMode=aaa. Enumeration: 'none': 1, 'captivePortal': 2, 'dot1X': 3.
                 vnsParentIfIndex 1.3.6.1.4.1.4329.15.3.3.1.2.1.10 integer32 read-write
Specifies the ifIndex of the parent VNS, if this VNS is a child. If this is a top level VNS, vnsParentIfIndex will return null or 0.
                 vnsMgmtTrafficEnable 1.3.6.1.4.1.4329.15.3.3.1.2.1.11 truthvalue read-write
Specifies whether clients in the VNS have access to EWC management elements.
                 vnsUseDHCPRelay 1.3.6.1.4.1.4329.15.3.3.1.2.1.12 integer read-write
This variable indicates what type of DHCP is used for the VNS. none(0): No DHCP server on the VNS. dhcpRelay(1): Uses DHCP relay to reach the DHCP server. localDhcp(2): Uses local DHCP server on the controler. Enumeration: 'none': 0, 'dhcpRelay': 1, 'localDhcp': 2.
                 vns3rdPartyAP 1.3.6.1.4.1.4329.15.3.3.1.2.1.13 truthvalue read-write
When true, specifies that the VNS contains 3rd party access points. Only one such VNS may be defined for a WirelessController.
                 vnsStatus 1.3.6.1.4.1.4329.15.3.3.1.2.1.14 rowstatus read-write
RowStatus variable for performing row operations on vnsConfigTable.
                 vnsMode 1.3.6.1.4.1.4329.15.3.3.1.2.1.15 integer read-write
Type of traffic for this VNS. routed(1): The traffic is routed at the controller. bridgeAtController(2): Traffic is bridged at controller. bridgeAtAP(3): Traffic is bridged at Access Points. wds(4): Wireless Distributed System (WDS) type of VNS. If VNS is type of wds(4), then only vnsSupressSSID, vnsDescription and vnsSSID has meaning. Enumeration: 'bridgeAtAP': 3, 'bridgeAtController': 2, 'wds': 4, 'thirdParty': 5, 'routed': 1.
                 vnsVlanID 1.3.6.1.4.1.4329.15.3.3.1.2.1.16 integer32 read-write
VLAN tag for the packets trasmitted to/from of the VNS. This value has meaning if vnsMode is bridgeAtController(2) or bridgeAtAP(3). If vnsMode = bridgeAtController(2), tagging is done at controller. If vnsMode = bridgeAtAP(3), tagging is done at Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value.
                 vnsInterfaceName 1.3.6.1.4.1.4329.15.3.3.1.2.1.17 octet string read-write
Physical interface to be used in the controller for trasmitting/receiving packets for the VNS. This value has meaning if vnsMode is bridgeAtController(2).
                 vnsMgmIpAddress 1.3.6.1.4.1.4329.15.3.3.1.2.1.18 ipaddress read-write
IP address of the management port associated to this VNS. This value has meaning if vnsMode is bridgeAtController(2).
                 vnsSuppressSSID 1.3.6.1.4.1.4329.15.3.3.1.2.1.19 truthvalue read-write
If set to true, this prevents this SSID from appearing in the beacon message.
                 vnsEnable11hSupport 1.3.6.1.4.1.4329.15.3.3.1.2.1.20 truthvalue read-write
If true, enables 802.11h support.
                 vnsApplyPowerBackOff 1.3.6.1.4.1.4329.15.3.3.1.2.1.21 truthvalue read-write
Indicates whether the AP will direct 802.11h-enabled clients to apply the same power back-off setting that the AP is using
                 vnsProcessClientIEReq 1.3.6.1.4.1.4329.15.3.3.1.2.1.22 truthvalue read-write
If true, enables support for 802.11d client information request.
                 vnsDLSSupportEnable 1.3.6.1.4.1.4329.15.3.3.1.2.1.23 truthvalue read-write
If true, enables support for DLS Support. This value has meaning only if vnsUseDHCPRelay is selected as localDhcp(2) and vnsMode is select as either routed(1) or bridgeAtController(2).
                 vnsDLSAddress 1.3.6.1.4.1.4329.15.3.3.1.2.1.24 displaystring read-write
DNS IP Address for DLS associated to this VNS. It could be IP address or Name
                 vnsDLSPort 1.3.6.1.4.1.4329.15.3.3.1.2.1.25 integer32 read-write
DNS Port for DLS associated to this VNS.
                 vnsRateControlProfile 1.3.6.1.4.1.4329.15.3.3.1.2.1.26 displaystring read-write
The Rate Control Profile that is referenced by this VNS.
                 vnsSessionAvailabilityEnable 1.3.6.1.4.1.4329.15.3.3.1.2.1.27 truthvalue read-write
To indicate if Session Availability feature is enabled.
                 vnsEnabled 1.3.6.1.4.1.4329.15.3.3.1.2.1.28 integer read-write
VNS status of being enabled or disabled. Enumeration: 'disabled': 0, 'enabled': 1.
                 vnsStrictSubnetAdherence 1.3.6.1.4.1.4329.15.3.3.1.2.1.29 integer read-write
Subnet adherence verification status for the VNS. Controller only learns devices whose address is within range of VNS segment definition. Disabling this field causes to not enforce validation. Doing so, may expose the controller to in-advertent Learning DoS attacks. Enumeration: 'disabled': 0, 'enabled': 1.
                 vnsSLPEnabled 1.3.6.1.4.1.4329.15.3.3.1.2.1.30 integer read-write
Status of SLP flag on Bridge at Controller type VNS. This field does not have any meaning for other types of VNS. Enumeration: 'disabled': 0, 'enabled': 1.
                 vnsConfigWLANID 1.3.6.1.4.1.4329.15.3.3.1.2.1.31 unsigned32 read-write
Creation of VNS requires existing of a free WLAN. One WLAN can only be used in one VNS only. This ID identifies the WLAN that is used for creation of VNS that is identified by this row.
         vnsDHCPRangeTable 1.3.6.1.4.1.4329.15.3.3.1.3 no-access
vnsDHCPRangeTable contains the IP address ranges that DHCP will serve to clients associated with this VNS.
             vnsDHCPRangeEntry 1.3.6.1.4.1.4329.15.3.3.1.3.1 no-access
Configuration information for a DHCP range.
                 vnsDHCPRangeIndex 1.3.6.1.4.1.4329.15.3.3.1.3.1.1 integer32 read-write
Index for the DHCP row element.
                 vnsDHCPRangeStart 1.3.6.1.4.1.4329.15.3.3.1.3.1.2 ipaddress read-write
First IP address in the range.
                 vnsDHCPRangeEnd 1.3.6.1.4.1.4329.15.3.3.1.3.1.3 ipaddress read-write
Last IP address in the range.
                 vnsDHCPRangeType 1.3.6.1.4.1.4329.15.3.3.1.3.1.4 integer read-write
Determines whether addresses in the specified range will be included, or excluded by the DHCP server. Enumeration: 'exclusion': 2, 'inclusion': 1.
                 vnsDHCPRangeStatus 1.3.6.1.4.1.4329.15.3.3.1.3.1.5 rowstatus read-write
Row status variable for row operations on the vnsDHCPRangeTable
         vnsCaptivePortalTable 1.3.6.1.4.1.4329.15.3.3.1.4 no-access
Details of the Captive Portal login page for VNSes that have vnsAssignment=ssid and vnsAuthModel=captivePortal.
             vnsCaptivePortalEntry 1.3.6.1.4.1.4329.15.3.3.1.4.1 no-access
Captive Portal Information for the VNS.
                 cpURL 1.3.6.1.4.1.4329.15.3.3.1.4.1.1 displaystring read-write
Redirect URL of the Captive Portal login page.
                 cpLoginLabel 1.3.6.1.4.1.4329.15.3.3.1.4.1.2 displaystring read-write
Label that appears in front of the login field on the Captive Portal login page.
                 cpPasswordLabel 1.3.6.1.4.1.4329.15.3.3.1.4.1.3 displaystring read-write
Label that appears in front of the password field on the Captive Portal login page.
                 cpHeaderURL 1.3.6.1.4.1.4329.15.3.3.1.4.1.4 displaystring read-write
URL of the Captive Portal header.
                 cpFooterURL 1.3.6.1.4.1.4329.15.3.3.1.4.1.5 displaystring read-write
URL of the Captive Portal footer.
                 cpMessage 1.3.6.1.4.1.4329.15.3.3.1.4.1.6 displaystring read-write
A welcome message, or set of instructions that is to appear on the Captive Portal login page.
                 cpReplaceGatewayWithFQDN 1.3.6.1.4.1.4329.15.3.3.1.4.1.7 displaystring read-write
Fully Qualified Domain Name (FQDN) to be used as the gateway IP address.
                 cpDefaultRedirectionURL 1.3.6.1.4.1.4329.15.3.3.1.4.1.8 displaystring read-write
Default Redirect URL of the Captive Portal login page.
                 cpConnectionIP 1.3.6.1.4.1.4329.15.3.3.1.4.1.9 ipaddress read-write
IP address of the Controller interface for Captive Portal.
                 cpConnectionPort 1.3.6.1.4.1.4329.15.3.3.1.4.1.10 integer32 read-write
Port number on the cpConnectionIP interface.
                 cpSharedSecret 1.3.6.1.4.1.4329.15.3.3.1.4.1.11 octet string read-write
Secret Key to be used to encrypt the information passed between the Controller and the external web server. It is the password common to both Controller and the external web server.
                 cpLogOff 1.3.6.1.4.1.4329.15.3.3.1.4.1.12 integer read-write
Toggles the display of logoff popup screen, allowing users to control their logoff. Enumeration: 'on': 1, 'off': 0.
                 cpStatusCheck 1.3.6.1.4.1.4329.15.3.3.1.4.1.13 integer read-write
Toggles the display of popup window with session statistics for users to monitor their usage and time left in session. Enumeration: 'on': 1, 'off': 0.
                 cpType 1.3.6.1.4.1.4329.15.3.3.1.4.1.14 integer read-write
Type of captive portal is enabled for the selected VNS. none(1) = no captive portal configured or type is unknown. internal(2) = internal captive portal. external(4) = external captive portal. guestPortal (5) = open host captive portal. Enumeration: 'guestPortal': 5, 'none': 1, 'internal': 2, 'external': 4.
         vnsRadiusServerTable 1.3.6.1.4.1.4329.15.3.3.1.5 no-access
List of RADIUS servers to be utilized for authentication in the VNS.
             vnsRadiusServerEntry 1.3.6.1.4.1.4329.15.3.3.1.5.1 no-access
Configuration information for a RADIUS server.
                 vnsRadiusServerName 1.3.6.1.4.1.4329.15.3.3.1.5.1.1 displaystring read-write
Name of the RADIUS server.
                 vnsRadiusServerPort 1.3.6.1.4.1.4329.15.3.3.1.5.1.2 integer32 read-write
Port number for the RADIUS server.
                 vnsRadiusServerRetries 1.3.6.1.4.1.4329.15.3.3.1.5.1.3 integer32 read-write
Number of retries for a RADIUS authentication request.
                 vnsRadiusServerTimeout 1.3.6.1.4.1.4329.15.3.3.1.5.1.4 integer32 read-write
Delay between requests.
                 vnsRadiusServerSharedSecret 1.3.6.1.4.1.4329.15.3.3.1.5.1.5 displaystring read-write
Shared secret to be used between the NAS and RADIUS server.
                 vnsRadiusServerNASIdentifier 1.3.6.1.4.1.4329.15.3.3.1.5.1.6 displaystring read-write
NAS identifier to be included in RADIUS request.
                 vnsRadiusServerAuthType 1.3.6.1.4.1.4329.15.3.3.1.5.1.7 integer read-write
Challenge mechanism for the request. Enumeration: 'pap': 0, 'notApplicable': 4, 'chap': 1, 'msChap': 2, 'msChapV2': 3.
                 vnsRadiusServerRowStatus 1.3.6.1.4.1.4329.15.3.3.1.5.1.8 rowstatus read-write
RowStatus value for manipulating vnsRADIUSServerTable.
                 vnsRadiusServerNasAddress 1.3.6.1.4.1.4329.15.3.3.1.5.1.9 ipaddress read-write
NAS address to be included in RADIUS request.
         vnsFilterIDTable 1.3.6.1.4.1.4329.15.3.3.1.6 no-access
Table of names filters for a VNS.
             vnsFilterIDEntry 1.3.6.1.4.1.4329.15.3.3.1.6.1 no-access
Name of a specific filter in the VNS.
                 vnsFilterID 1.3.6.1.4.1.4329.15.3.3.1.6.1.1 displaystring read-write
Filter names.
                 vnsFilterIDStatus 1.3.6.1.4.1.4329.15.3.3.1.6.1.2 rowstatus read-write
RowStatus for operating on vnsFilterIDTable.
         vnsFilterRuleTable 1.3.6.1.4.1.4329.15.3.3.1.7 no-access
Table containing specific filters for a named filter.
             vnsFilterRuleEntry 1.3.6.1.4.1.4329.15.3.3.1.7.1 no-access
Filter elements for an individual VNS filter.
                 vnsFilterRuleOrder 1.3.6.1.4.1.4329.15.3.3.1.7.1.1 integer32 read-write
Position of the filter in the filter list.
                 vnsFilterRuleDirection 1.3.6.1.4.1.4329.15.3.3.1.7.1.2 integer read-write
Traffic direction defined by the rule. Enumeration: 'both': 3, 'none': 0, 'out': 2, 'in': 1.
                 vnsFilterRuleAction 1.3.6.1.4.1.4329.15.3.3.1.7.1.3 integer read-write
Allow or deny traffic for the filter. Enumeration: 'allow': 1, 'disallow': 2.
                 vnsFilterRuleIPAddress 1.3.6.1.4.1.4329.15.3.3.1.7.1.4 ipaddress read-write
IP address to apply the filter.
                 vnsFilterRulePortLow 1.3.6.1.4.1.4329.15.3.3.1.7.1.5 integer32 read-write
Low port number for the filter.
                 vnsFilterRulePortHigh 1.3.6.1.4.1.4329.15.3.3.1.7.1.6 integer32 read-write
High port number for the filter.
                 vnsFilterRuleProtocol 1.3.6.1.4.1.4329.15.3.3.1.7.1.7 integer read-write
Specific protocol to filter. Enumeration: 'none': 0, 'udp': 3, 'ipsecESP': 5, 'notApplicable': 1, 'tcp': 2, 'icmp': 4, 'ipsecAH': 6.
                 vnsFilterRuleEtherType 1.3.6.1.4.1.4329.15.3.3.1.7.1.8 integer read-write
Specific ethertype to filter. Enumeration: 'arp': 2, 'ip': 1, 'none': 0, 'rarp': 3.
                 vnsFilterRuleStatus 1.3.6.1.4.1.4329.15.3.3.1.7.1.9 rowstatus read-write
RowStatus value for the vnsFilterRuleTable.
         vnsPrivacyTable 1.3.6.1.4.1.4329.15.3.3.1.8 no-access
Table of privacy settings for the VNS.
             vnsPrivacyEntry 1.3.6.1.4.1.4329.15.3.3.1.8.1 no-access
Configuration values for a specific privacy setting.
                 vnsPrivWEPKeyType 1.3.6.1.4.1.4329.15.3.3.1.8.1.1 integer read-write
Type of key in use. none(1) = not cofigured, wepstatic(2) = static WEP, wpapsk(3) = WPA Pre-Shared Key, dynamic(4) = dynamically assigned, wpa(5) = WPA. Enumeration: 'none': 1, 'wepstatic': 2, 'dynamic': 4, 'wpapsk': 3, 'wpa': 5.
                 vnsPrivDynamicRekeyFrequency 1.3.6.1.4.1.4329.15.3.3.1.8.1.2 integer32 read-write
Dynamic WEP re-keying frequency, in seconds. Setting this value to 0 disables rekeying. This value is only meaningful if vnsPrivWEPKeyType = wpapsk(3). For any other values of vnsPrivWEPKeyType, reading or setting this value will return an unsuccessful status and will return a value of null or zero.
                 vnsPrivWEPKeyLength 1.3.6.1.4.1.4329.15.3.3.1.8.1.3 integer32 read-write
WEP key length, 64, 128, or 152 bits. If vnsPrivWEPKeyType is none, reading or setting this value will return an unsuccessful status and will return a value of null or zero.
                 vnsPrivWPA1Enabled 1.3.6.1.4.1.4329.15.3.3.1.8.1.4 truthvalue read-write
Enables WPA.1 (Wi-Fi Protected Access).
                 vnsPrivUseSharedKey 1.3.6.1.4.1.4329.15.3.3.1.8.1.5 truthvalue read-write
Enables the use of WPA shared key for this VNS.
                 vnsPrivWPASharedKey 1.3.6.1.4.1.4329.15.3.3.1.8.1.6 displaystring read-write
The value of the WPA shared key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.
                 vnsPrivWPA2Enabled 1.3.6.1.4.1.4329.15.3.3.1.8.1.7 truthvalue read-write
When true, WPA v.2 support is enabled.
         vnsWEPKeyTable 1.3.6.1.4.1.4329.15.3.3.1.9 no-access
Table of WEP key entries for a static WEP definition.
             vnsWEPKeyEntry 1.3.6.1.4.1.4329.15.3.3.1.9.1 no-access
WEP key for a single entry in the table.
                 vnsWEPKeyIndex 1.3.6.1.4.1.4329.15.3.3.1.9.1.1 integer32 read-write
Table index for the WEP key.
                 vnsWEPKeyValue 1.3.6.1.4.1.4329.15.3.3.1.9.1.2 wepkeytype read-write
Value of a WEP key for this VNS. This value is logically WRITE ONLY. Attempts to read this value shall return unsuccessful status and values of null or zero.
         vns3rdPartyAPTable 1.3.6.1.4.1.4329.15.3.3.1.10 no-access
Contains a list of 3rd Party access points for the EWC.
               vns3rdPartyAPEntry 1.3.6.1.4.1.4329.15.3.3.1.10.1 no-access
Configuration information for a 3rd party access point.
                   apMacAddress 1.3.6.1.4.1.4329.15.3.3.1.10.1.1 macaddress read-write
Ethernet MAC address of the 3rd party access point.
                   apIpAddress 1.3.6.1.4.1.4329.15.3.3.1.10.1.2 ipaddress read-write
IP address of the 3rd party access point.
         vnsQoSTable 1.3.6.1.4.1.4329.15.3.3.1.11 no-access
This table contains list of per-VNS QoS related configuration.
               vnsQoSEntry 1.3.6.1.4.1.4329.15.3.3.1.11.1 no-access
An entry related to QoS configuration for the VNS indexed by vnsIfIndex.
                   vnsQoSWirelessLegacyFlag 1.3.6.1.4.1.4329.15.3.3.1.11.1.1 integer read-write
This variable is used to enable/disable legacy QoS feature. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSWirelessWMMFlag 1.3.6.1.4.1.4329.15.3.3.1.11.1.2 integer read-write
This variable is used to enable/disable WMM feature. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSWireless80211eFlag 1.3.6.1.4.1.4329.15.3.3.1.11.1.3 integer read-write
This variable is used to enable/disable 802.11e feature. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSWirelessTurboVoiceFlag 1.3.6.1.4.1.4329.15.3.3.1.11.1.4 integer read-write
This variable is used to enable/disable turbo feature. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSPriorityOverrideFlag 1.3.6.1.4.1.4329.15.3.3.1.11.1.5 integer read-write
Enable/disable the use of DSCP to override Servic Class (SC) value. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSPriorityOverrideSC 1.3.6.1.4.1.4329.15.3.3.1.11.1.6 integer read-write
Service class (SC) of the override value. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled. Enumeration: 'platinum': 5, 'gold': 4, 'networkControl': 7, 'bestEffort': 1, 'premiumVoice': 6, 'background': 0, 'silver': 3, 'bronze': 2.
                   vnsQoSPriorityOverrideDSCP 1.3.6.1.4.1.4329.15.3.3.1.11.1.7 integer32 read-write
DSCP override value to be used for the service class. This field has a meaning if vnsQoSPriorityOverrideFlag is enabled.
                   vnsQoSClassificationServiceClass 1.3.6.1.4.1.4329.15.3.3.1.11.1.8 octet string read-write
Service Class value for the DSCP code. This field is 64-bytes long. Each byte represents mapping between DSCP and Service Class. Position of each byte in the array represents DSCP code and the content of each byte represents the service class value for that DSCP code. For example, second byte represents DSCP code 1 and its value represents SC value. Value for each byte is equivalent to either of: background = 0, bestEffort = 1, bronze = 2, silver = 3, gold = 4, platinum = 5, premiumVoice = 6, networkControl = 7
                   vnsQoSWirelessEnableUAPSD 1.3.6.1.4.1.4329.15.3.3.1.11.1.9 integer read-write
This variable is used to enable/disable U-APSD feature. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSWirelessUseAdmControlVoice 1.3.6.1.4.1.4329.15.3.3.1.11.1.10 integer read-write
If enabled, admission control for voice traffic is used. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSWirelessUseAdmControlVideo 1.3.6.1.4.1.4329.15.3.3.1.11.1.11 integer read-write
If enabled, admission control for vedio traffic is used. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled. Enumeration: 'disabled': 2, 'enabled': 1.
                   vnsQoSWirelessULPolicerAction 1.3.6.1.4.1.4329.15.3.3.1.11.1.12 integer read-write
If doNothing is selected, no action is taken. This is default value. If sendDELTStoClient is selected, AP will send DELTS if a client is abusing in uplink. This field has a meaning only if admission control is enabled for VO or VI. Enumeration: 'doNothing': 0, 'sendDELTStoClient': 1.
                   vnsQoSWirelessDLPolicerAction 1.3.6.1.4.1.4329.15.3.3.1.11.1.13 integer read-write
If doNothing is selected, no action is taken. This is default value. If downgrade is selected, AP will downgrade all traffic to the highest AC that does not require CAC in downlink. If drop is selected, AP will drop client if it observes a client that is illegally using an AC that has CAC mandatory in downlink. This field has a meaning only if admission control is enabled for VO or VI. Enumeration: 'downgrade': 1, 'drop': 2, 'doNothing': 0.
                   vnsQoSWirelessUseAdmControlBestEffort 1.3.6.1.4.1.4329.15.3.3.1.11.1.14 integer read-write
If enabled, admission control for video traffic is set to Best Effort. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled. Enumeration: 'disabled': 0, 'enabled': 1.
                   vnsQoSWirelessUseAdmControlBackground 1.3.6.1.4.1.4329.15.3.3.1.11.1.15 integer read-write
If enabled, admission control for video traffic is set to Background. This field has a meaning if vnsQoSUseGlobalAdmVoice is enabled. Enumeration: 'disabled': 0, 'enabled': 1.
         vnsWDSRFTable 1.3.6.1.4.1.4329.15.3.3.1.12 no-access
ontains definitions of the Wireless Distirbution System (WDS) VNS defined on this Controller.
               vnsWDSRFEntry 1.3.6.1.4.1.4329.15.3.3.1.12.1 no-access
Configuration elements for a specific WDS VNS.
                   vnsWDSRFAPName 1.3.6.1.4.1.4329.15.3.3.1.12.1.1 displaystring read-write
AP name.
                   vnsWDSRFbgService 1.3.6.1.4.1.4329.15.3.3.1.12.1.2 integer read-write
Type of service offered by this radio. Enumeration: 'notAvailable': 0, 'both': 4, 'none': 1, 'parent': 3, 'child': 2.
                   vnsWDSRFaService 1.3.6.1.4.1.4329.15.3.3.1.12.1.3 integer read-write
Type of service offered by this radio. Enumeration: 'notAvailable': 0, 'both': 4, 'none': 1, 'parent': 3, 'child': 2.
                   vnsWDSRFPreferredParent 1.3.6.1.4.1.4329.15.3.3.1.12.1.4 displaystring read-write
Desired preferred parent.
                   vnsWDSRFBackupParent 1.3.6.1.4.1.4329.15.3.3.1.12.1.5 displaystring read-write
Desired backup parent.
                   vnsWDSRFBridge 1.3.6.1.4.1.4329.15.3.3.1.12.1.6 integer read-write
WDS bridge status. Enumeration: 'notBridged': 2, 'bridged': 1.
         vnsRateControlProfTable 1.3.6.1.4.1.4329.15.3.3.1.13 no-access
Table of Rate Control Profiles.
               vnsRateControlProfEntry 1.3.6.1.4.1.4329.15.3.3.1.13.1 no-access
Name of a specific Rate Control Profile.
                   vnsRateControlProfInd 1.3.6.1.4.1.4329.15.3.3.1.13.1.1 unsigned32 read-write
A monotonically increasing integer which acts as index of entries within the named Rate Control Profiles.
                   vnsRateControlProfName 1.3.6.1.4.1.4329.15.3.3.1.13.1.2 displaystring read-write
Rate Control Profile Name.
                   vnsRateControlCIR 1.3.6.1.4.1.4329.15.3.3.1.13.1.3 unsigned32 read-write
Rate Control Average Rate (CIR) in kbps.
                   vnsRateControlCBS 1.3.6.1.4.1.4329.15.3.3.1.13.1.4 unsigned32 read-write
Rate Control Burst Size (CBS) in bytes.
         vnsAPFilterTable 1.3.6.1.4.1.4329.15.3.3.1.14 no-access
Filters applied to Access Points via VNS settings and assignments.
               vnsAPFilterEntry 1.3.6.1.4.1.4329.15.3.3.1.14.1 no-access
An entry containing filters definition for Access Points assigned to VNS that is identified by VNS index.
                   vnsAPFilterRuleOrder 1.3.6.1.4.1.4329.15.3.3.1.14.1.1 integer32 read-only
Position of the filter in the filter list.
                   vnsAPFilterRuleDirection 1.3.6.1.4.1.4329.15.3.3.1.14.1.2 integer read-only
Traffic direction related to the filter rule. Enumeration: 'both': 3, 'out': 2, 'in': 1.
                   vnsAPFilterAction 1.3.6.1.4.1.4329.15.3.3.1.14.1.3 integer32 read-only
Allow or deny traffic for the filter.
                   vnsAPFilterIPAddress 1.3.6.1.4.1.4329.15.3.3.1.14.1.4 ipaddress read-only
IP address applied to the filter.
                   vnsAPFilterMask 1.3.6.1.4.1.4329.15.3.3.1.14.1.5 ipaddress read-only
The mask, number of bits set to one in the mask, applied to filter IP address.
                   vnsAPFilterPortLow 1.3.6.1.4.1.4329.15.3.3.1.14.1.6 integer32 read-only
Low port number for the filter.
                   vnsAPFilterPortHigh 1.3.6.1.4.1.4329.15.3.3.1.14.1.7 integer32 read-only
High port number for the filter.
                   vnsAPFilterProtocol 1.3.6.1.4.1.4329.15.3.3.1.14.1.8 integer32 read-only
Specific protocol for the filter.
                   vnsAPFilterEtherType 1.3.6.1.4.1.4329.15.3.3.1.14.1.9 integer read-only
Specific ethertype to the filter. Enumeration: 'arp': 2, 'ip': 1, 'rarp': 3.
                   vnsAPFilterRowStatus 1.3.6.1.4.1.4329.15.3.3.1.14.1.10 integer32 read-only
RowStatus value for this table entry.
     vnsStatsObjects 1.3.6.1.4.1.4329.15.3.3.2
         activeVNSSessionCount 1.3.6.1.4.1.4329.15.3.3.2.1 integer32 read-write
Number of active VNSs.
         vnsStatTable 1.3.6.1.4.1.4329.15.3.3.2.2 no-access
Description.
             vnsStatEntry 1.3.6.1.4.1.4329.15.3.3.2.2.1 no-access
Description.
                 vnsStatName 1.3.6.1.4.1.4329.15.3.3.2.2.1.1 octet string read-write
Name of the VNS.
                 vnsStatTxPkts 1.3.6.1.4.1.4329.15.3.3.2.2.1.2 counter64 read-only
Trasmitted packets.
                 vnsStatRxPkts 1.3.6.1.4.1.4329.15.3.3.2.2.1.3 counter64 read-only
Received packtes.
                 vnsStatTxOctects 1.3.6.1.4.1.4329.15.3.3.2.2.1.4 counter64 read-only
Trasmitted octects.
                 vnsStatRxOctects 1.3.6.1.4.1.4329.15.3.3.2.2.1.5 counter64 read-only
Received octets.
                 vnsStatMulticastTxPkts 1.3.6.1.4.1.4329.15.3.3.2.2.1.6 counter64 read-only
Multicast trasmitted packets.
                 vnsStatMulticastRxPkts 1.3.6.1.4.1.4329.15.3.3.2.2.1.7 counter64 read-only
Multicast received packets.
                 vnsStatBroadcastTxPkts 1.3.6.1.4.1.4329.15.3.3.2.2.1.8 counter64 read-only
Broadcast trasmitted packets.
                 vnsStatBroadcastRxPkts 1.3.6.1.4.1.4329.15.3.3.2.2.1.9 counter64 read-only
Broadcast received packets.
                 vnsStatRadiusTotRequests 1.3.6.1.4.1.4329.15.3.3.2.2.1.10 counter64 read-only
Total requests sent to radius server.
                 vnsStatRadiusReqFailed 1.3.6.1.4.1.4329.15.3.3.2.2.1.11 counter64 read-only
Requests that failed to be processed by radius server.
                 vnsStatRadiusReqRejected 1.3.6.1.4.1.4329.15.3.3.2.2.1.12 counter64 read-only
Requests that have been rejected by radius server.
         vnsExceptionStatTable 1.3.6.1.4.1.4329.15.3.3.2.3 no-access
Description.
             vnsExceptionStatEntry 1.3.6.1.4.1.4329.15.3.3.2.3.1 no-access
Description.
                 vnsExceptionFiterName 1.3.6.1.4.1.4329.15.3.3.2.3.1.1 octet string read-write
Filter name.
                 vnsExceptionStatPktsDenied 1.3.6.1.4.1.4329.15.3.3.2.3.1.2 counter64 read-only
Total packets that are denied by defined filters.
                 vnsExceptionStatPktsAllowed 1.3.6.1.4.1.4329.15.3.3.2.3.1.3 counter64 read-only
Total packets that are allowed by defined filters.
         vnsWDSStatTable 1.3.6.1.4.1.4329.15.3.3.2.4 no-access
Description.
             vnsWDSStatEntry 1.3.6.1.4.1.4329.15.3.3.2.4.1 no-access
Description.
                 vnsWDSStatAPName 1.3.6.1.4.1.4329.15.3.3.2.4.1.1 displaystring read-write
AP name serving WDS VNS.
                 vnsWDSStatAPRole 1.3.6.1.4.1.4329.15.3.3.2.4.1.2 integer read-write
Role of the AP in WDS tree. All the statistics and configuration information in this table has no meaning if the role is unknown(-1). Enumeration: 'repeater': 3, 'unknown': -1, 'none': 0, 'root': 2, 'satellite': 1.
                 vnsWDSStatAPRadio 1.3.6.1.4.1.4329.15.3.3.2.4.1.3 displaystring read-write
Radio and freq on which uplink WDS is established, N/A if connected over etherent (value are 'a:', 'b/g:', or 'N/A')
                 vnsWDSStatAPParent 1.3.6.1.4.1.4329.15.3.3.2.4.1.4 displaystring read-write
AP Name of the parent AP.
                 vnsWDSStatSSID 1.3.6.1.4.1.4329.15.3.3.2.4.1.5 displaystring read-write
SSID of the WDS VNS where parent WDS link is established.
                 vnsWDSStatRxFrame 1.3.6.1.4.1.4329.15.3.3.2.4.1.6 counter64 read-write
Received frames from the parent AP.
                 vnsWDSStatTxFrame 1.3.6.1.4.1.4329.15.3.3.2.4.1.7 counter64 read-write
Transmitted frames to the parent AP.
                 vnsWDSStatRxError 1.3.6.1.4.1.4329.15.3.3.2.4.1.8 counter64 read-write
Received frames in error from the parent AP.
                 vnsWDSStatTxError 1.3.6.1.4.1.4329.15.3.3.2.4.1.9 counter64 read-write
Transmitted frames in error to the parent AP.
                 vnsWDSStatRxRSSI 1.3.6.1.4.1.4329.15.3.3.2.4.1.10 integer32 read-write
Average Received Signal Strength Indicator (RSSI).
                 vnsWDSStatRxRate 1.3.6.1.4.1.4329.15.3.3.2.4.1.11 counter64 read-write
Average receive rate.
                 vnsWDSStatTxRate 1.3.6.1.4.1.4329.15.3.3.2.4.1.12 counter64 read-write
Average transmission rate.
     vnsGlobalSetting 1.3.6.1.4.1.4329.15.3.3.3
         wirelessQoS 1.3.6.1.4.1.4329.15.3.3.3.1
             maxVoiceBWforReassociation 1.3.6.1.4.1.4329.15.3.3.3.1.1 integer32 read-write
Maximum voice bandwidth to be used for re-association.
             maxVoiceBWforAssociation 1.3.6.1.4.1.4329.15.3.3.3.1.2 integer32 read-write
Maximum voice bandwidth to be used for association.
             maxVideoBWforReassociation 1.3.6.1.4.1.4329.15.3.3.3.1.3 integer32 read-write
Maximum video bandwidth to be used for re-association.
             maxVideoBWforAssociation 1.3.6.1.4.1.4329.15.3.3.3.1.4 integer32 read-write
Maximum video bandwidth to be used for association.
             maxBestEffortBWforReassociation 1.3.6.1.4.1.4329.15.3.3.3.1.5 integer32 read-write
Maximum best effort bandwidth to be used for reassociation.
             maxBestEffortBWforAssociation 1.3.6.1.4.1.4329.15.3.3.3.1.6 integer32 read-write
Maximum best effort bandwidth to be used for association.
             maxBackgroundBWforReassociation 1.3.6.1.4.1.4329.15.3.3.3.1.7 integer32 read-write
Maximum background bandwidth to be used for reassociation.
             maxBackgroundBWforAssociation 1.3.6.1.4.1.4329.15.3.3.3.1.8 integer32 read-write
Maximum background bandwidth to be used for association.
         radiusInfo 1.3.6.1.4.1.4329.15.3.3.3.2
             externalRadiusServerTable 1.3.6.1.4.1.4329.15.3.3.3.2.2 no-access
Table of external RADIUS servers available for authentication services.
                 externalRadiusServerEntry 1.3.6.1.4.1.4329.15.3.3.3.2.2.1 no-access
Configuration information about the RADIUS server entry.
                     externalRadiusServerName 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.1 displaystring read-write
RADIUS server name.
                     externalRadiusServerAddress 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.2 displaystring read-write
RADIUS server address, it can be either string or IP address.
                     externalRadiusServerSharedSecret 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.3 octet string read-write
Shared secret between Radius and the client.
                     externalRadiusServerRowStatus 1.3.6.1.4.1.4329.15.3.3.3.2.2.1.4 rowstatus read-write
Row Status for the entry.
         dasInfo 1.3.6.1.4.1.4329.15.3.3.3.3
             dasPort 1.3.6.1.4.1.4329.15.3.3.3.3.1 integer32 read-write
Dynamic Authorization Server (DAS) port.
             dasReplayInterval 1.3.6.1.4.1.4329.15.3.3.3.3.2 integer32 read-write
The time window for message timeliness and replay protection for DAS packets. Packets should be dropped that their time generation is outside of this specified interval. Value zero indicates that the timeliness checking will be performed.
         advancedFilteringMode 1.3.6.1.4.1.4329.15.3.3.3.4 integer read-write
Value of 'enabled(1)' means EWC is operating in advanced filtering configuration mode. Value of 'disabled(0)' means EWC is operating in mode that is compatible with releases prior to 7.41. This field can only be set to 'enabled(1)' and after setting it to that value, the only way to undo that is by resetting the database. Enumeration: 'disabled': 0, 'enabled': 1.
         radiusStrictMode 1.3.6.1.4.1.4329.15.3.3.3.5 integer read-write
If this variable set to true, then assignment of RADIUS server(s) to WLAN are automatic during WLAN creation, otherwise, assignment of RADIUS server(s) to WLAN must be done manually. Enumeration: 'strictModeEnabled': 1, 'strictModeDisabled': 0.
         radiusFastFailoverEvents 1.3.6.1.4.1.4329.15.3.3.3.6
             radiusFastFailoverEventsTable 1.3.6.1.4.1.4329.15.3.3.3.6.1 no-access
Table in which to configure which RADIUS servers will be sent interim accounting reports for stations when a fast failover incident occurs
                 radiusFastFailoverEventsEntry 1.3.6.1.4.1.4329.15.3.3.3.6.1.1 no-access
An entry for each radius server.
                     radiusFFOEid 1.3.6.1.4.1.4329.15.3.3.3.6.1.1.1 displaystring no-access
The IP address or hostname of configured radius server. If the hostname is created from GUI/CLI and the size is bigger than 64 characters, snmp will display the first 64 characters only.
                     fastFailoverEvents 1.3.6.1.4.1.4329.15.3.3.3.6.1.1.2 integer read-write
If true, send an interim accounting record to the RADIUS server for each affected station when a fast failover event occurs. This field can be modified when controller is operated in availablity paired mode and fast failover is enabled Enumeration: 'fastFailoverEventsEnabled': 1, 'fastFailoverEventsDisabled': 0.
         dhcpRelayListeners 1.3.6.1.4.1.4329.15.3.3.3.7
             dhcpRelayListenersMaxEntries 1.3.6.1.4.1.4329.15.3.3.3.7.1 unsigned32 read-only
Maximum number of servers to which DHCP messages are relayed .
             dhcpRelayListenersNumEntries 1.3.6.1.4.1.4329.15.3.3.3.7.2 unsigned32 read-only
The current number of entries in the dhcpRelayListenersTable.
             dhcpRelayListenersNextIndex 1.3.6.1.4.1.4329.15.3.3.3.7.3 integer32 read-only
This object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in dhcpRelayListenersTable. An index is considered available if the index falls within the range of 1 to dhcpRelayListenersMaxEntries and it is not being used to index an existing entry in the dhcpRelayListenersTable contained this entity. This value should only be used as guideline for the management application and there is no requirement on the management application to create entries based upon this index value. Value of zero indicates there is no more room for new dhcpRelayListenersTable creation.
             dhcpRelayListenersTable 1.3.6.1.4.1.4329.15.3.3.3.7.4 no-access
A list of servers to which DHCP messages are relayed but from which no responses are expected.
                 dhcpRelayListenersEntry 1.3.6.1.4.1.4329.15.3.3.3.7.4.1 no-access
An entry for each dhcpRelayListeners.
                     dhcpRelayListenersID 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.1 unsigned32 no-access
The id corresponds to the 'server number' in the controller GUI and CLI.
                     dhcpRelayListenersRowStatus 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.2 rowstatus read-only
This object allows dynamic creation and deletion of entries within dhcpRelayListenersTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait.
                     destinationName 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.3 displaystring read-write
Text string uniquely identifying NAC Server Name. Allowable characters for this field are from the set of A-Z, a-z, -_!#$, 0-9, and space. max len is 63 chars Howerver, it is recommended to avoid leading and trailing spaces.
                     destinationIP 1.3.6.1.4.1.4329.15.3.3.3.7.4.1.4 ipaddress read-write
IPv4 address to which DHCP messages are relayed.
         clientAutologinOption 1.3.6.1.4.1.4329.15.3.3.3.8 integer read-write
Many devices such as those made by Apple(R) implement an autologin feature that prompts the user to login as soon as the device detects the presence of a Captive Portal. This feature sometimes causes problems for users who actually interact with the captive portal. hide(0) - Hide the captive portal from Autologin detector. redirect(1) - Redirect detection messages to the Captive Portal. This option is to allow client autologin to detect the captive portal & prompt the user to login. This may cause post-authentication redirection to fail. drop(2) - Drop detection messages. Enumeration: 'redirect': 1, 'drop': 2, 'hide': 0.
         authenticationAdvanced 1.3.6.1.4.1.4329.15.3.3.3.9
             includeServiceType 1.3.6.1.4.1.4329.15.3.3.3.9.1 integer read-write
Include the Service-Type attribute in client access request messages when this field is set to enable(1). Enumeration: 'enable': 1, 'disable': 0.
             clientMessageDelayTime 1.3.6.1.4.1.4329.15.3.3.3.9.2 integer32 read-write
This field specifies how long, in seconds, the notice Web page is displayed to the client when the topology changes as a result of a role change. The notice Web page indicates that authentication was successful and that the user must close all browser windows and then restart the browser for access to the network. Currently this is supported for Internal Captive Portal, Guest Portal, and Guest Splash.
             radiusAccounting 1.3.6.1.4.1.4329.15.3.3.3.9.3 integer read-write
This field enables or disables RADIUS accounting. Disabling RADIUS accounting overrides the RADIUS accounting settings of individual WLAN Services. Enabling RADIUS accounting activates RADIUS accounting only in WLAN Services specifically configured to perform it. Enumeration: 'enable': 1, 'disable': 0.
             serverUsageModel 1.3.6.1.4.1.4329.15.3.3.3.9.4 integer read-write
This field specifies RADIUS server failover behavior when the primary server goes down. When the primary server is down the controller moves on to the secondary or tertiary configured RADIUS Servers. If this field is set to primaryBackup(1), then the controller starts polling the primary RADIUS server to see if it is up. When the primary RADIUS server comes back, the controller automatically starts sending new access requests to the primary RADIUS server but pending requests continue with backup RADIUS server. The administrator can select between the two strategies, i.e. the existing roundRobin(0) or new primaryBackup(1). This only applies to Authentication, not to Accounting. Enumeration: 'roundRobin': 0, 'primaryBackup': 1.
             radacctStartOnIPAddr 1.3.6.1.4.1.4329.15.3.3.3.9.5 integer read-write
When this OID is set to disabled (0) the controller sends a RADIUS accounting start message as soon as it receives an Access-Accept for the user from a RADIUS server. When this OID is set to enabled(1) the controller defers sending the RADIUS accounting start message until an Access-Accept for the client is received and the client's IP address is known. Enumeration: 'enable': 1, 'disable': 0.
             clientServiceTypeLogin 1.3.6.1.4.1.4329.15.3.3.3.9.6 integer read-write
When this OID is set to enabled(1) the controller sets the Service-Type attribute of a station's Access-Request to 'Login'. When this OID is set to disabled(0) the controller sets the Service-Type attribute of a station's Access-Request to 'Framed'. By default this OID is set to 'disabled'. You cannot use RADIUS servers to authenticate administrators for local server access when this OID is set to 'enabled'. Enumeration: 'enable': 1, 'disable': 0.
             applyMacAddressFormat 1.3.6.1.4.1.4329.15.3.3.3.9.7 integer read-write
When this OID is set to enabled(1), the controller uses MAC-Based Authentication MAC address format (refer to radiusMacAddressFormatOption) for user authentication and accounting via RADIUS. Enumeration: 'enable': 1, 'disable': 0.
         radiusExtnsSetting 1.3.6.1.4.1.4329.15.3.3.3.10
               radiusExtnsSettingTable 1.3.6.1.4.1.4329.15.3.3.3.10.1 no-access
List of RADIUS servers that will be used.
                   radiusExtnsSettingEntry 1.3.6.1.4.1.4329.15.3.3.3.10.1.1 no-access
An entry for each RADIUS server.
                       radiusExtnsIndex 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.1 integer32 no-access
A number uniquely identifying each conceptual row in the radiusExtnsSettingTable. This value also equivalent to etsysRadiusAuthServerIndex of enterasys-radius-auth-client-mib.txt file.
                       pollingMechanism 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.2 integer read-write
This field specifies the method to determine the health of the RADIUS server. If set to useRFC5997StatusServerRequest(1), RFC 5997 Status-Server packets will be sent to the primary server to determine it's health. If set to authorizeAsActualUser(0), access-request messages for a specified user account will be sent to the primary server to determine it's health. Enumeration: 'useRFC5997StatusServerRequest': 1, 'authorizeAsActualUser': 0.
                       serverPollingInterval 1.3.6.1.4.1.4329.15.3.3.3.10.1.1.3 integer32 read-write
Interval in seconds for the controller to poll the primary server.
         netflowAndMirrorN 1.3.6.1.4.1.4329.15.3.3.3.11
               netflowDestinationIP 1.3.6.1.4.1.4329.15.3.3.3.11.1 ipaddress read-write
The IP address for the Purview engine that will receive netflow records.
               netflowInterval 1.3.6.1.4.1.4329.15.3.3.3.11.2 integer32 read-write
The netflow record sending interval.
               mirrorFirstN 1.3.6.1.4.1.4329.15.3.3.3.11.3 integer32 read-write
If non-zero, the first N packets of a particular flow will be mirrored. If 0, all packets will be mirrored.
               mirrorL2Ports 1.3.6.1.4.1.4329.15.3.3.3.11.4 octet string read-write
Configure the mirror port(s) on the controller. The default value is None. Only l2ports will be allowed to be selected and only when not referred to elsewhere (lag, topologies). The most significant bit of the most significant octet represents the first esa port (esa0). The second most significant bit of the most significant octet represents the second esa port (esa1) and so on.
         radiusMacAddressFormatOption 1.3.6.1.4.1.4329.15.3.3.3.12 integer read-write
The controller allows configuring different kinds of Mac address format in RADIUS messages. option1: mac address format as XXXXXXXXXXXX option2: mac address format as XX:XX:XX:XX:XX:XX option3: mac address format as XX-XX-XX-XX-XX-XX option4: mac address format as XXXX.XXXX.XXXX option5: mac address format as XXXXXX-XXXXXX option6: mac address format as XX XX XX XX XX XX option7: mac address format as xxxxxxxxxxxx option8: mac address format as xx:xx:xx:xx:xx:xx option9: mac address format as xx-xx-xx-xx-xx-xx option10: mac address format as xxxx.xxxx.xxxx option11: mac address format as xxxxxx-xxxxxx option12: mac address format as xx xx xx xx xx xx Enumeration: 'option10': 10, 'option11': 11, 'option12': 12, 'option8': 9, 'option6': 6, 'option7': 7, 'option4': 4, 'option5': 5, 'option2': 2, 'option3': 3, 'option1': 1.
     wlan 1.3.6.1.4.1.4329.15.3.3.4
         wlanMaxEntries 1.3.6.1.4.1.4329.15.3.3.4.1 unsigned32 read-only
Maximum number of WLAN supported by the device.
         wlanNumEntries 1.3.6.1.4.1.4329.15.3.3.4.2 unsigned32 read-only
The current number of entries in the wlanTable.
         wlanTableNextAvailableIndex 1.3.6.1.4.1.4329.15.3.3.4.3 integer32 read-only
This object indicates numerically lowest available index within this entity, which may be used for the value of index in the creation of new entry in wlanTable. An index is considered available if the index falls within the range of 1 to wlanMaxEntries and it is not being used to index an existing entry in the wlanTable contained this entity. This value should only be used as guideline for the management application and there is no requirement on the management application to create entries based upon this index value. Value of zero indicates there is no more room for new wlanTable creation.
         wlanTable 1.3.6.1.4.1.4329.15.3.3.4.4 no-access
Table of configured WLAN.
             wlanEntry 1.3.6.1.4.1.4329.15.3.3.4.4.1 no-access
An entry for each WLAN.
                 wlanID 1.3.6.1.4.1.4329.15.3.3.4.4.1.1 unsigned32 read-only
Unique internal ID associated with WLAN.
                 wlanRowStatus 1.3.6.1.4.1.4329.15.3.3.4.4.1.2 rowstatus read-write
This object allows dynamic creation and deletion of entries within wlanTable as well as activation and deactivation of these entries. For row creation, EWC only supports creatAndWait. WLAN name must be set before making the row active and persistent. Any WLAN that is associated to a VNS cannot be deleted unless it is first disassociated from VNS before being deleted. Any inactive entry will not be persistent and it will be lost during controller's restart.
                 wlanServiceType 1.3.6.1.4.1.4329.15.3.3.4.4.1.3 integer read-write
Service type of WLAN. Enumeration: 'wds': 3, 'remote': 5, 'thirdParty': 4, 'mesh': 6, 'standard': 0.
                 wlanName 1.3.6.1.4.1.4329.15.3.3.4.4.1.4 displaystring read-write
Text string uniquely identifying WLAN within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces.
                 wlanSSID 1.3.6.1.4.1.4329.15.3.3.4.4.1.5 displaystring read-write
SSID (broadcast string) associated with WLAN. Allowable characters for this field are from the set of A-Z, a-z, _-.@, 0-9, and space. Howerver, it is recommendedto avoid leading and trailing spaces.
                 wlanSynchronize 1.3.6.1.4.1.4329.15.3.3.4.4.1.6 truthvalue read-write
If it is set to true, then WLAN will be replicated to peer controller if availability is configured and enabled.
                 wlanEnabled 1.3.6.1.4.1.4329.15.3.3.4.4.1.7 truthvalue read-write
This field is used to enable or disable this WLAN. If WLAN is disabled, then no traffic will be passed on behalf of this WLAN.
                 wlanDefaultTopologyID 1.3.6.1.4.1.4329.15.3.3.4.4.1.8 integer read-write
The ID of topology from topologyTable associated to this WLAN. Topology ID of -1 means no default topology is associated to this WLAN. Physical topologies cannot be assigned to WLAN. The default topology indicates which topology to use for this WLAN if there is no topology associated with VNS via policy assignment.
                 wlanSessionTimeout 1.3.6.1.4.1.4329.15.3.3.4.4.1.9 unsigned32 read-write
MU session that is associated to this WLAN will be terminated after elapse of this number of minutes from the start of its current session.
                 wlanIdleTimeoutPreAuth 1.3.6.1.4.1.4329.15.3.3.4.4.1.10 unsigned32 read-write
Elapse time between association and authentication after which MU session will be terminated if the user is idle this amount of time without being authenticated.
                 wlanIdleSessionPostAuth 1.3.6.1.4.1.4329.15.3.3.4.4.1.11 unsigned32 read-write
MU session that is associated to this WLAN will be terminated if the user is idle this amount of time after being authenticated.
                 wlanSupressSSID 1.3.6.1.4.1.4329.15.3.3.4.4.1.12 truthvalue read-write
If it is set to true then broadcast string (SSID) for this WLAN will not be broadcasted over the air.
                 wlanDot11hSupport 1.3.6.1.4.1.4329.15.3.3.4.4.1.13 truthvalue read-write
If it is set to true then dot11h support is enabled for clients associated to this WLAN.
                 wlanDot11hClientPowerReduction 1.3.6.1.4.1.4329.15.3.3.4.4.1.14 truthvalue read-write
If it is set to true then apply power reduction to dot11h clients associated to this WLAN. This field has meaning if wlanDot11hSupport is enabled (set to true).
                 wlanProcessClientIE 1.3.6.1.4.1.4329.15.3.3.4.4.1.15 truthvalue read-write
If it is set to true then clients that are associated to this WLAN their IE requests will be processed.
                 wlanEngerySaveMode 1.3.6.1.4.1.4329.15.3.3.4.4.1.16 truthvalue read-write
If it is set to true then engergy saving mode is enabled.
                 wlanBlockMuToMuTraffic 1.3.6.1.4.1.4329.15.3.3.4.4.1.17 truthvalue read-write
If it is set to true then two MU associated to this WLAN cannot communicate with each other.
                 wlanRemoteable 1.3.6.1.4.1.4329.15.3.3.4.4.1.18 truthvalue read-write
If it is set to true then this WLAN can be used as remote WLAN within mobility zone that this controller is partaking.
                 wlanVNSID 1.3.6.1.4.1.4329.15.3.3.4.4.1.19 unsigned32 read-only
The ID of the VNS that uses this WLAN. WLAN can be created but not used in any VNS, in that case alue of zero indicates WLAN has not been used in any VNS. The value of this field set during VNS creation no during the WLAN creation.
                 wlanRadioManagement11k 1.3.6.1.4.1.4329.15.3.3.4.4.1.20 integer read-write
When this bit is set to enable, the Radio Management (802.11k) feature is enabled on those APs who have this wlan configuration and 802.11k capability. Enumeration: 'enable': 1, 'disable': 0.
                 wlanBeaconReport 1.3.6.1.4.1.4329.15.3.3.4.4.1.21 integer read-write
Enable/disable AP to send out beacon report. This field is configurable only if wlanRadioManagement11k is set to enable(1). Enumeration: 'enable': 1, 'disable': 0.
                 wlanQuietIE 1.3.6.1.4.1.4329.15.3.3.4.4.1.22 integer read-write
Enable/disable AP to advertise a Quiet Element. This field is configurable only if wlanRadioManagement11k is set to enable(1). Enumeration: 'enable': 1, 'disable': 0.
                 wlanMirrorN 1.3.6.1.4.1.4329.15.3.3.4.4.1.23 integer read-write
prohibited(0): Mirroring is prohibited. bothDirection(1) : Both direction packets will be mirrored. rxDirectionOnly(2): Only receive direction packets will be mirrored. Note: This will only take effect when the user's runtime current Roles's MirrorN action is None. Enumeration: 'rxDirectionOnly': 2, 'prohibited': 0, 'bothDirection': 1.
                 wlanNetFlow 1.3.6.1.4.1.4329.15.3.3.4.4.1.24 integer read-write
Enable/disable netflow on this WLAN service. Enumeration: 'enable': 1, 'disable': 0.
                 wlanAppVisibility 1.3.6.1.4.1.4329.15.3.3.4.4.1.25 integer read-write
Enable/disable both application visibility and control for this WLAN service. Enumeration: 'enable': 1, 'disable': 2.
         wlanStatsTable 1.3.6.1.4.1.4329.15.3.3.4.5 no-access
Stats related to WLAN (RFS) created on EWC.
             wlanStatsEntry 1.3.6.1.4.1.4329.15.3.3.4.5.1 no-access
An entery for each existing WLAN on EWC.
                 wlanStatsID 1.3.6.1.4.1.4329.15.3.3.4.5.1.1 unsigned32 read-only
Unique internal ID associated with WLAN.
                 wlanStatsAssociatedClients 1.3.6.1.4.1.4329.15.3.3.4.5.1.2 counter32 read-only
Number of clients that are currently associated to this WLAN.
                 wlanStatsRadiusTotRequests 1.3.6.1.4.1.4329.15.3.3.4.5.1.3 counter32 read-only
Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests using SSID associated to the WLAN for association, authentication or authorization to this WLAN.
                 wlanStatsRadiusReqFailed 1.3.6.1.4.1.4329.15.3.3.4.5.1.4 counter32 read-only
Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this WLAN but failed to be processed by RADIUS servers.
                 wlanStatsRadiusReqRejected 1.3.6.1.4.1.4329.15.3.3.4.5.1.5 counter32 read-only
Number of requests that were sent to RADIUS servers associated to this WLAN on behalf of MUs' requests for association, authentication or authorization to this WLAN but rejected to be processed by RADIUS servers.
         wlanPrivTable 1.3.6.1.4.1.4329.15.3.3.4.6 no-access
This table contains configuration of privacy settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition or deletion of entries in wlanTable table.
             wlanPrivEntry 1.3.6.1.4.1.4329.15.3.3.4.6.1 no-access
An entry in wlanPrivTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable.
                 wlanPrivPrivacyType 1.3.6.1.4.1.4329.15.3.3.4.6.1.1 integer read-write
Type of privacy applied to the corresponding configured WLAN. Configuration of the other fields in this table depends on the value of this field, e.g. if this field is set to none(0), then no other field in this table are settable. Enumeration: 'wpaPSK': 4, 'none': 0, 'staticWEP': 1, 'wpa': 3, 'dynamicWEP': 2.
                 wlanPrivWEPKeyIndex 1.3.6.1.4.1.4329.15.3.3.4.6.1.2 integer read-write
Index of configured WEP. This field is required if and only if privacy type is staticWEP(1).
                 wlanPrivWEPKeyLength 1.3.6.1.4.1.4329.15.3.3.4.6.1.3 integer read-write
Key legnth for the configured WEP key. This field is required if and only if privacy type is staticWEP(1). Enumeration: 'sixtyFourBits': 1, 'oneHundred52Bits': 3, 'oneHundred28Bits': 2.
                 wlanPrivWEPKey 1.3.6.1.4.1.4329.15.3.3.4.6.1.4 displaystring read-write
The configured WEP key length must match the wlanPrivWEPKeyLength field. Any key with length longer or shorter than that length will be rejected. This field is required if and only if privacy type is staticWEP(1). This key can only be viewed in SNMPv3 mode with privacy.
                 wlanPrivWPAv1EncryptionType 1.3.6.1.4.1.4329.15.3.3.4.6.1.5 integer read-write
The type of encryption used for WPA version 1 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to wpaV1 (1) or wpaV1andV2 (3). Enumeration: 'auto': 2, 'tkipOnly': 1, 'undefined': 0.
                 wlanPrivWPAv2EncryptionType 1.3.6.1.4.1.4329.15.3.3.4.6.1.6 integer read-write
The type of encryption used for WPA version 2 associations. This OID is undefined unless wlanPrivPrivacyType is wpa (3) or wpaPSK (4) and wlanPrivWPAversion is set to wpaV2 (2) or wpaV1 and V2 (3). Enumeration: 'aesOnly': 3, 'auto': 2, 'undefined': 0.
                 wlanPrivKeyManagement 1.3.6.1.4.1.4329.15.3.3.4.6.1.7 integer read-write
Key management option available for the WPA2. This field has meaning if privacy type is WPA with WPA2 option enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) and wlanPrivWPAversion set to wpaV2(2) or wpaV1andV2(3). . Enumeration: 'opportunisticKey': 1, 'both': 3, 'none': 0, 'preAuthentication': 2.
                 wlanPrivBroadcastRekeying 1.3.6.1.4.1.4329.15.3.3.4.6.1.8 truthvalue read-write
Broadcast rekeying if this value is set to true. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4).
                 wlanPrivRekeyInterval 1.3.6.1.4.1.4329.15.3.3.4.6.1.9 unsigned32 read-write
Interval in seconds for requesting rekeying. This field has meaning if privacy type is WPA and broadcast rekeying is enabled (wlanPrivBroadcastRekeying is set to true). This field can be modified only if wlanPrivBroadcastRekeying is set to true.
                 wlanPrivGroupKPSR 1.3.6.1.4.1.4329.15.3.3.4.6.1.10 truthvalue read-write
Group Key Power Save Retry (GKPSR) value for the WPA type of privacy. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4).
                 wlanPrivWPAPSK 1.3.6.1.4.1.4329.15.3.3.4.6.1.11 octet string read-write
WPA-PSK shared key. This field has meaning if and only if WLAN privacy type is set to WPA-PSK. Input type can be either HEX formatted string or ASCII string. In case of HEX string, it must be 64 octets from set of hex characters. In case of ASCII string, the length is limited between 8 to 63 octets. This key can only be viewed in SNMPv3 mode with privacy. This field can be modified only if wlanPrivPrivacyType is set to wpaPSK(4).
                 wlanPrivWPAversion 1.3.6.1.4.1.4329.15.3.3.4.6.1.12 integer read-write
Type of wpa version selected. This field can be modified only if wlanPrivPrivacyType is set to wpa(3) or wpaPSK(4). Note: wpa version v1 only is not allowed. 0 - no wpa version selected. 1 - wpa version v1 selected. 2 - wpa version v2 selected. 3 - both wpa version v1 and v2 selected. Enumeration: 'wpaV1': 1, 'wpaV1andV2': 3, 'wpaV2': 2, 'wpaNone': 0.
                 wlanPrivfastTransition 1.3.6.1.4.1.4329.15.3.3.4.6.1.13 integer read-write
When this field is set to enable(1), the 802.11r (fast transition) is enabled. This field can be modified only if wlanPrivPrivacyType is set to wpa(2). Enumeration: 'enable': 1, 'disable': 0.
                 wlanPrivManagementFrameProtection 1.3.6.1.4.1.4329.15.3.3.4.6.1.14 integer read-write
Disable(0) : The AP will not encrypt any management frames. Enable(1): The AP will encrypt management frames for clients who also support this feature. If the clients do not support this feature, they are still able to connect to the AP but with no management frames encryption. Require(2): The AP will only allow clients who have the PMF feature to connect. Supported management frames will be encrypted to 802.11w standards. Clients who do not support this feature will not be able to associate. Enumeration: 'enable': 1, 'disable': 0, 'require': 2.
         wlanAuthTable 1.3.6.1.4.1.4329.15.3.3.4.7 no-access
This table contains configuration of authentication settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table.
             wlanAuthEntry 1.3.6.1.4.1.4329.15.3.3.4.7.1 no-access
An entry in wlanAuthTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable. Note: All the fields in this table except wlanAuthType and wlanAuthCollectAcctInformation have meaning if MAC-based authentication filed (wlanAuthMacBasedAuth) is set to true.
                 wlanAuthType 1.3.6.1.4.1.4329.15.3.3.4.7.1.1 integer read-write
The type of authentication applied to stations attempting to associate to a BSSID belonging to this WLAN Service. If the dot1x type is selected, then this WLAN must have privacy. When the dot1x or internalCP is selected, the controller must have a RADIUS server, and SNMP will auto assign one RADIUS server to this WLAN if the user did not assign one. Enumeration: 'externalCP': 4, 'firewallFriendlyExCP': 7, 'internalCP': 2, 'dot1x': 3, 'disabled': 1, 'easyGuestCP': 5, 'guestSplash': 6.
                 wlanAuthMacBasedAuth 1.3.6.1.4.1.4329.15.3.3.4.7.1.2 truthvalue read-write
MAC based authorization is enabled if this field is set to true. When this field set to true, SNMP will auto configure one RADIUS server to enable MAC authorization.
                 wlanAuthMACBasedAuthOnRoam 1.3.6.1.4.1.4329.15.3.3.4.7.1.3 truthvalue read-write
If it is set to true, the client will be forced to go through MAC based authorization when the client roamed. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true.
                 wlanAuthAutoAuthAuthorizedUser 1.3.6.1.4.1.4329.15.3.3.4.7.1.4 truthvalue read-write
All authorized users will be considered authenticated automatically. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true.
                 wlanAuthAllowUnauthorizedUser 1.3.6.1.4.1.4329.15.3.3.4.7.1.5 truthvalue read-write
Unauthorized users will be allowed if this field is set to true.This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true.
                 wlanAuthRadiusIncludeAP 1.3.6.1.4.1.4329.15.3.3.4.7.1.6 truthvalue read-write
AP serial number will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthRadiusIncludeVNS 1.3.6.1.4.1.4329.15.3.3.4.7.1.7 truthvalue read-write
VNS name will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthRadiusIncludeSSID 1.3.6.1.4.1.4329.15.3.3.4.7.1.8 truthvalue read-write
WLAN SSID will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthRadiusIncludePolicy 1.3.6.1.4.1.4329.15.3.3.4.7.1.9 truthvalue read-write
Policy name will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthRadiusIncludeTopology 1.3.6.1.4.1.4329.15.3.3.4.7.1.10 truthvalue read-write
Topology name will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthRadiusIncludeIngressRC 1.3.6.1.4.1.4329.15.3.3.4.7.1.11 truthvalue read-write
Ingress rate control name will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthRadiusIncludeEgressRC 1.3.6.1.4.1.4329.15.3.3.4.7.1.12 truthvalue read-write
Egress rate control name will be included in RADIUS request packet as VSA if this field is set to true.
                 wlanAuthCollectAcctInformation 1.3.6.1.4.1.4329.15.3.3.4.7.1.13 truthvalue read-write
Accounting information is collected for clients if this field is set to true.
                 wlanAuthReplaceCalledStationIDWithZone 1.3.6.1.4.1.4329.15.3.3.4.7.1.14 truthvalue read-write
Replace called station ID with Zone if this field is set to true.
                 wlanAuthRadiusAcctAfterMacBaseAuthorization 1.3.6.1.4.1.4329.15.3.3.4.7.1.15 truthvalue read-write
RADIUS accounting begins after MAC-based authorization completes if this field is set to true. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true.
                 wlanAuthRadiusTimeoutRole 1.3.6.1.4.1.4329.15.3.3.4.7.1.16 integer32 read-write
Apply this role to clients when the RADIUS server timed out. '-1' is treat like access reject. Any other number is the Role ID. This field has meaning only when wlanAuthMacBasedAuth is set to true. This field can be modified only when wlanAuthMacBasedAuth is set to true.
                 wlanAuthRadiusOperatorNameSpace 1.3.6.1.4.1.4329.15.3.3.4.7.1.17 integer read-write
wlanAuthRadiusOperatorNameSpace is the Namespace ID as defined in RFC 5580. The value within this field contains the operator namespace identifier. The Namespace ID value is encoded in ASCII and has the following values. -1 : disabled. 48 : TADIG. 49 : REALM. 50 : E212. 51 : ICC. Enumeration: 'disabled': -1, 'e212': 50, 'tadig': 48, 'icc': 51, 'realm': 49.
                 wlanAuthRadiusOperatorName 1.3.6.1.4.1.4329.15.3.3.4.7.1.18 displaystring read-write
RADIUS accounting message will include this string when the wlanAuthRadiusOperatorNameSpace is not set to -1.
                 wlanAuthMACBasedAuthReAuthOnAreaRoam 1.3.6.1.4.1.4329.15.3.3.4.7.1.19 truthvalue read-write
If this field is set to true, the client will be forced to go through MAC based authorization when the client roams to another area. This field has meaning and can be modified only when wlanAuthMacBasedAuth is set to true.
         wlanRadiusTable 1.3.6.1.4.1.4329.15.3.3.4.8 no-access
This table contains configuration of RADIUS settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there may exist one or more entries of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table.
             wlanRadiusEntry 1.3.6.1.4.1.4329.15.3.3.4.8.1 no-access
An entry in wlanRadiusTable for each RADIUS server used by the WLAN indexed by wlanID.
                 wlanRadiusIndex 1.3.6.1.4.1.4329.15.3.3.4.8.1.1 unsigned32 no-access
Internally generated index and it has no external meaning.
                 wlanRadiusName 1.3.6.1.4.1.4329.15.3.3.4.8.1.2 displaystring read-write
Name of the RADIUS server associated to this entry.
                 wlanRadiusUsage 1.3.6.1.4.1.4329.15.3.3.4.8.1.3 integer read-write
Usage type associated to this entry for authentication. Enumeration: 'acc': 3, 'mac': 2, 'auth': 1.
                 wlanRadiusPriority 1.3.6.1.4.1.4329.15.3.3.4.8.1.4 integer32 read-write
Priority associated to this entry for authentication. RADIUS servers are contacted for authentication requests in the order of their priority defined in this field. The highest priority servers (priorities with lower numerical values have higher priority order) are consulted first for any authentication request.
                 wlanRadiusPort 1.3.6.1.4.1.4329.15.3.3.4.8.1.5 unsigned32 read-write
The RADIUS authentication requests should be sent to this authentication port.
                 wlanRadiusRetries 1.3.6.1.4.1.4329.15.3.3.4.8.1.6 unsigned32 read-write
Maximum number of retries attempted for an specific authentication request.
                 wlanRadiusTimeout 1.3.6.1.4.1.4329.15.3.3.4.8.1.7 unsigned32 read-write
Number of seconds to wait for a response from authentication server for each request sent to the server before considering the request as failure.
                 wlanRadiusNASUseVnsIP 1.3.6.1.4.1.4329.15.3.3.4.8.1.8 truthvalue read-write
If this value is set to true, then VNS IP address associated to the WLAN indexed by wlanID to this entry is used as NAS IP address. Otherwise NAS IP address should be configured manually.
                 wlanRadiusNASIP 1.3.6.1.4.1.4329.15.3.3.4.8.1.9 displaystring read-write
NAS IP associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASUseVnsIP.
                 wlanRadiusNASIDUseVNSName 1.3.6.1.4.1.4329.15.3.3.4.8.1.10 truthvalue read-write
If this value is set to true, then use VNS name associated to the WLAN indexed by wlanID for this entry as NAS ID. Otherwise NAS ID should be configured manually.
                 wlanRadiusNASID 1.3.6.1.4.1.4329.15.3.3.4.8.1.11 displaystring read-write
NAS ID associated to this RADIUS server. Configuration of this field is directly affected by the value of wlanRadiusNASIDUseVNSName.
                 wlanRadiusAuthType 1.3.6.1.4.1.4329.15.3.3.4.8.1.12 integer read-write
Authentication type used for this WLAN when using this RADIUS server to authenticate users. Enumeration: 'pap': 0, 'chap': 1, 'mschap2': 3, 'mschap': 2.
         wlanCPTable 1.3.6.1.4.1.4329.15.3.3.4.9 no-access
This table contains configuration of Captive Portal settings for all configured WLAN on EWC. For each of the configured WLAN on the controller one entry is added to this table. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on behalf of users with privacy.
             wlanCPEntry 1.3.6.1.4.1.4329.15.3.3.4.9.1 no-access
An entry in wlanCPTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable. The writable fields in this table can be modified depending on the corresponding wlanTable and type of CP assigned to the WLAN. If the authentication type is 'disabled(0)' for the WLAN, then all other entries in this table have no meaning.
                 wlanCPAuthType 1.3.6.1.4.1.4329.15.3.3.4.9.1.1 integer read-write
Type of authentication applied to MU requesting association using SSID associated to this WLAN. Enumeration: 'externalCP': 4, 'firewallFriendlyExCP': 7, 'internalCP': 2, 'dot1x': 3, 'disabled': 1, 'easyGuestCP': 5, 'guestSplash': 6.
                 wlanCP802HttpRedirect 1.3.6.1.4.1.4329.15.3.3.4.9.1.2 truthvalue read-write
If it is set to true, then CP will be redirected to configured CP. This value has meaning only for CP of the type 'dot1x(3)'.
                 wlanCPExtConnection 1.3.6.1.4.1.4329.15.3.3.4.9.1.3 ipaddress read-write
IP address of the interface for this CP.
                 wlanCPExtPort 1.3.6.1.4.1.4329.15.3.3.4.9.1.4 unsigned32 read-write
The port associated to the CP IP address.
                 wlanCPExtEnableHttps 1.3.6.1.4.1.4329.15.3.3.4.9.1.5 truthvalue read-write
HTTPS support is enabled if this field is set to true.
                 wlanCPExtEncryption 1.3.6.1.4.1.4329.15.3.3.4.9.1.6 integer read-write
Type of encryption for the CP. Enumeration: 'none': 0, 'legacy': 1, 'aes': 2.
                 wlanCPExtSharedSecret 1.3.6.1.4.1.4329.15.3.3.4.9.1.7 octet string read-write
Shared secret used for this captive portal.
                 wlanCPExtTosOverride 1.3.6.1.4.1.4329.15.3.3.4.9.1.8 truthvalue read-write
Override ToS of NAC server usage only.
                 wlanCPExtTosValue 1.3.6.1.4.1.4329.15.3.3.4.9.1.9 unsigned32 read-write
ToS value for NAC server only.
                 wlanCPExtAddIPtoURL 1.3.6.1.4.1.4329.15.3.3.4.9.1.10 truthvalue read-write
If this value is set to true, then add EWC IP address and port number to the redirection URL.
                 wlanCPIntLogoffButton 1.3.6.1.4.1.4329.15.3.3.4.9.1.11 truthvalue read-write
If set to true provide 'Logoff' button to the user in CP page.
                 wlanCPIntStatusCheckButton 1.3.6.1.4.1.4329.15.3.3.4.9.1.12 truthvalue read-write
If set to true provide 'Status Check' button to the user in CP page.
                 wlanCPReplaceIPwithFQDN 1.3.6.1.4.1.4329.15.3.3.4.9.1.13 displaystring read-write
Replace CP gateway IP address with FQDN.
                 wlanCPSendLoginTo 1.3.6.1.4.1.4329.15.3.3.4.9.1.14 integer read-write
This field indicates to what URL the successful login session must be redirected. This field qualifies wlanCPRedirectURL. Enumeration: 'originalDestination': 0, 'customURL': 2, 'cpSessionPage': 1.
                 wlanCPRedirectURL 1.3.6.1.4.1.4329.15.3.3.4.9.1.15 displaystring read-write
Text string identifying default redirection URL.
                 wlanCPGuestAccLifetime 1.3.6.1.4.1.4329.15.3.3.4.9.1.16 unsigned32 read-write
This value indicates for how many days the guest account is valid. Value of zero indicates that there is no limit for the guest account.
                 wlanCPGuestAllowedLifetimeAcct 1.3.6.1.4.1.4329.15.3.3.4.9.1.17 truthvalue read-write
If this value is set to true, then guest admin can obtain lifetime account.
                 wlanCPGuestSessionLifetime 1.3.6.1.4.1.4329.15.3.3.4.9.1.18 unsigned32 read-write
The guess account session using this CP cannot last longer than this number of hours. Value of zero means there is no limit for the session.
                 wlanCPGuestIDPrefix 1.3.6.1.4.1.4329.15.3.3.4.9.1.19 displaystring read-write
The prefix used for guest portal user ID label.
                 wlanCPGuestMinPassLength 1.3.6.1.4.1.4329.15.3.3.4.9.1.20 unsigned32 read-write
Minimum password length for the guest user account associated to this WLAN.
                 wlanCPGuestMaxConcurrentSession 1.3.6.1.4.1.4329.15.3.3.4.9.1.21 unsigned32 read-write
Maximum number of the guest users can use this set of credentials to access this concurrent session.
                 wlanCPUseHTTPSforConnection 1.3.6.1.4.1.4329.15.3.3.4.9.1.22 truthvalue read-write
When this value set to true, use HTTPS for user connection. It has meaning only when wlanCPAuthType is set to internalCP(2) or easyGuestCP(5) or guestSplash(6)
                 wlanCPIdentity 1.3.6.1.4.1.4329.15.3.3.4.9.1.23 displaystring read-write
wlanCPIdentity is used to identify the EWC to the external captive portal server (ECP) and the ECP to the EWC.
                 wlanCPCustomSpecificURL 1.3.6.1.4.1.4329.15.3.3.4.9.1.24 displaystring read-write
After a user successfully logs in, the user will be redirected to the URL as defined in the wlanCPCustomSpecificURL.
                 wlanCPSelectionOption 1.3.6.1.4.1.4329.15.3.3.4.9.1.25 bits read-write
Append the above parameter(s) to the EWC captive portal redirection URL if one or more of the bits are set. Bits: 'apNameAndSerial': 1, 'vnsName': 3, 'currentlyAssignedRole': 5, 'timeStamp': 7, 'addEWCPortAndIP': 0, 'userMacAddress': 4, 'associatedBSSID': 2, 'signature': 8, 'containmentVLAN': 6, 'ssid': 9.
         wlanUnsecuredWlanCounts 1.3.6.1.4.1.4329.15.3.3.4.10 counter32 read-only
Total number of WLAN with security issues. The details of security issues can be found in wlanSecurityReportTable.
         wlanSecurityReportTable 1.3.6.1.4.1.4329.15.3.3.4.11 no-access
This table contains the weak configuration settings for all configured WLAN on EWC. For each of the configured WLAN on the controller there exist one entry in this table. Addition/deletion of entries in this table are automatic depending on the addition or deletion of entries in wlanTable table. This table can be accessed using SNMPv3 on behalf of users with privacy.
               wlanSecurityReportEntry 1.3.6.1.4.1.4329.15.3.3.4.11.1 no-access
An entry in wlanSecurityReportTable for each configured WLAN on EWC. Each entry is indexed with corresponding wlan ID of wlanTable.
                   wlanSecurityReportFlag 1.3.6.1.4.1.4329.15.3.3.4.11.1.1 integer read-only
Value of secureSetting(2) indicates that WLAN has secure configuration. Enumeration: 'secureSetting': 2, 'unsecureSetting': 1.
                   wlanSecurityReportUnsecureType 1.3.6.1.4.1.4329.15.3.3.4.11.1.2 bits read-only
bit 0: by setting this bit means this WLAN does not use any kind of encryption bit 1: by setting this bit means this WLAN uses weak WEP encryption bit 2: by setting this bit means this WLAN uses weak tkip encryption bit 3: by setting this bit means this WLAN uses default SSID bit 4: by setting this bit means this WLAN uses HotSpot SSID bit 5: by setting this bit means this WLAN uses Rainbow SSID bit 6: by setting this bit means this WLAN uses dictionary word as an encryption key bit 7: by setting this bit means this WLAN uses dictionary word in an encryption key string bit 8: by setting this bit means this WLAN uses a short password key Bits: 'rainbowSsid': 5, 'passwordTooShort': 8, 'dictionaryWordKey': 6, 'tkip': 2, 'dictionaryWordSubstring': 7, 'wep': 1, 'hotspotSsid': 4, 'defaultSsid': 3, 'open': 0.
                   wlanSecurityReportNotes 1.3.6.1.4.1.4329.15.3.3.4.11.1.3 displaystring read-only
Textual description of any security issues related to the WLAN is reflected in this field.
         wlanRadiusServerTable 1.3.6.1.4.1.4329.15.3.3.4.12 no-access
This table contains configuration of RADIUS Servers settings for all configured WLANs on the Wireless Controller. For each of the configured WLANs on the controller there may exist one or more entries of RADIUS server(s) serving the WLAN. Addition/deletion of entries in this table are automatic depending on the addition/deletion of entries in wlanTable table.
               wlanRadiusServerEntry 1.3.6.1.4.1.4329.15.3.3.4.12.1 no-access
An entry in wlanRadiusServerTable for each RADIUS server used by the WLAN indexed by wlanID and radiusId. The radiusId is the controller's internal radius server index.
                   radiusId 1.3.6.1.4.1.4329.15.3.3.4.12.1.1 unsigned32 no-access
Controller's internal RADIUS index.
                   wlanRadiusServerName 1.3.6.1.4.1.4329.15.3.3.4.12.1.2 displaystring read-only
Name of the RADIUS server.
                   wlanRadiusServerUse 1.3.6.1.4.1.4329.15.3.3.4.12.1.3 integer read-write
use : This means that this WLAN service indexed by wlanID uses this RADIUS server which it is indexed by the radiusId. Enumeration: 'use': 1, 'notUse': 0.
                   wlanRadiusServerUsage 1.3.6.1.4.1.4329.15.3.3.4.12.1.4 bits read-write
bit 0: By setting this bit, this RADIUS server is used for authentication. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3), or externalCP(4). bit 1: By setting this bit, this RADIUS server is used for MAC-based authentication. This bit has meaning only when wlanAuthMacBasedAuth is set to true. bit 2: By setting this bit, this RADIUS server is used for accounting. This bit has meaning only when wlanAuthType is set to internalCP(2), dot1x(3), or externalCP(4). Bits: 'acct': 2, 'mac': 1, 'auth': 0.
                   wlanRadiusServerAuthUseVNSIPAddr 1.3.6.1.4.1.4329.15.3.3.4.12.1.5 truthvalue read-write
When this value set to true, use the VNS's IP address as NAS IP address during the authentication.
                   wlanRadiusServerAuthNASIP 1.3.6.1.4.1.4329.15.3.3.4.12.1.6 displaystring read-write
Use this IP address as the NAS IP addresss during the authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set.
                   wlanRadiusServerAuthUseVNSName 1.3.6.1.4.1.4329.15.3.3.4.12.1.7 truthvalue read-write
When this value set to true, use the VNS's name as the NAS identifier during the authentication.
                   wlanRadiusServerAuthNASId 1.3.6.1.4.1.4329.15.3.3.4.12.1.8 displaystring read-write
Use this name as the NAS identifier during the authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set.
                   wlanRadiusServerAuthAuthType 1.3.6.1.4.1.4329.15.3.3.4.12.1.9 integer read-write
Authentication type. This field has meaning only when the wlanRadiusServerUsage's bit 0 is set. Enumeration: 'pap': 0, 'eap': 4, 'chap': 1, 'mschap2': 3, 'mschap': 2.
                   wlanRadiusServerAcctUseVNSIPAddr 1.3.6.1.4.1.4329.15.3.3.4.12.1.10 truthvalue read-write
When this value set to true, use the VNS's IP address as NAS IP address during the accounting.
                   wlanRadiusServerAcctNASIP 1.3.6.1.4.1.4329.15.3.3.4.12.1.11 displaystring read-write
Use this IP address as the NAS IP addresss during the accounting. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set.
                   wlanRadiusServerAcctUseVNSName 1.3.6.1.4.1.4329.15.3.3.4.12.1.12 truthvalue read-write
When this value set to true, use the VNS's name as the NAS identifier during the accounting.
                   wlanRadiusServerAcctNASId 1.3.6.1.4.1.4329.15.3.3.4.12.1.13 displaystring read-write
Use this name as the NAS identifier during the accounting. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set.
                   wlanRadiusServerAcctSIAR 1.3.6.1.4.1.4329.15.3.3.4.12.1.14 truthvalue read-write
If this value is set to true, then the controller sends interrim accounting records for fast failover events. This field has meaning only when the wlanRadiusServerUsage's bit 2 is set.
                   wlanRadiusServerMacUseVNSIPAddr 1.3.6.1.4.1.4329.15.3.3.4.12.1.15 truthvalue read-write
When this value set to true, use the VNS's IP address as NAS IP address during the MAC based authentication.
                   wlanRadiusServerMacNASIP 1.3.6.1.4.1.4329.15.3.3.4.12.1.16 displaystring read-write
Use this IP address as the NAS IP addresss during the MAC based authentication. The default IP address is the VNS IP address. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set.
                   wlanRadiusServerMacUseVNSName 1.3.6.1.4.1.4329.15.3.3.4.12.1.17 truthvalue read-write
When this value set to true, use the VNS's name as the NAS identifier during the MAC based authentication.
                   wlanRadiusServerMacNASId 1.3.6.1.4.1.4329.15.3.3.4.12.1.18 displaystring read-write
Use this name as the NAS identifier during the MAC based authentication. The default name is the VNS name. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set.
                   wlanRadiusServerMacAuthType 1.3.6.1.4.1.4329.15.3.3.4.12.1.19 integer read-write
Authentication type. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set. Enumeration: 'pap': 0, 'chap': 1, 'mschap2': 3, 'mschap': 2.
                   wlanRadiusServerMacPW 1.3.6.1.4.1.4329.15.3.3.4.12.1.20 displaystring read-write
The password is used for MAC based authentication. This field has meaning only when the wlanRadiusServerUsage's bit 1 is set.
 topology 1.3.6.1.4.1.4329.15.3.4
     topologyConfig 1.3.6.1.4.1.4329.15.3.4.1
         topologyTable 1.3.6.1.4.1.4329.15.3.4.1.1 no-access
List of topologies configured on EWC.
             topologyEntry 1.3.6.1.4.1.4329.15.3.4.1.1.1 no-access
Configuration information about a topology in topology table. EWC supports different types of topologies, therefore, for complete configuration of a topology not all fields are necessary to be defined or have meaning. Definition of each field in this table specifies topolog-specific characteristics of the field and its relevance.
                 topologyID 1.3.6.1.4.1.4329.15.3.4.1.1.1.1 unsigned32 no-access
Unique internal identifier of the topology. This item is generated internally by EWC and has no external meaning.
                 topologyName 1.3.6.1.4.1.4329.15.3.4.1.1.1.2 displaystring read-write
Name associated with topology. This name must be unique within EWC. Allowable characters for this field are from the set of A-Z, a-z, -!#$:, 0-9, and space. Howerver, it is recommended to avoid leading and trailing spaces.
                 topologyMode 1.3.6.1.4.1.4329.15.3.4.1.1.1.3 integer read-write
Type of this topology. This field implies the meaning and necessity of other attributes associated to the topology. Enumeration: 'management': 6, 'undefined': -1, 'bridgedAtAP': 1, 'routed': 0, 'thirdPartyAP': 4, 'bridgedAtAC': 2, 'physical': 5.
                 topologyTagged 1.3.6.1.4.1.4329.15.3.4.1.1.1.4 integer read-write
If topology is tagged, then a VLAN ID must be assigned to the topology. Meaning associated to this field is topology specific: - For Admin topology (management port) is always untagged - Ror routed topology has no meaning and always untagged - For all other topologies this field is configurable. Enumeration: 'untagged': 2, 'tagged': 1.
                 topologyVlanID 1.3.6.1.4.1.4329.15.3.4.1.1.1.5 integer32 read-write
VLAN ID assigned to a tagged topology. For untagged topology this field has no meaning and it is set to -1.
                 topologyEgressPort 1.3.6.1.4.1.4329.15.3.4.1.1.1.6 octet string read-write
Egress port associated to this topology if it is tagged and VLANID defined for the topology. This field is represented as octect string: The most significant bit of most significant octet represent first physical port (lowest number port) and second most significant bit of most significant octet represent second physical port and so on. Meaning associated to this field is topology specific: - For Admin topology (management port) this field has no meaning. - Ror routed topology this field has no meaning - For all other topologies: physical, bridge at controller, and bridge at AP topologies this field is configurable.
                 topologyLayer3 1.3.6.1.4.1.4329.15.3.4.1.1.1.7 truthvalue read-write
If set to true, then topology has layer three persence. Any topology with layer three presence must have IP address and gateway assigned to it. Meaning associated to this field is topology specific: - For Admin topology (management port) it is always set to true. - Ror bridge at AP this field has no meaning and it is set to false. - For routed and physical topologies it is always set to true. - For bridge at controller type of topology this field is configurable.
                 topologyIPAddress 1.3.6.1.4.1.4329.15.3.4.1.1.1.8 ipaddress read-write
IP address assigned to the topology as its interface. Meaning associated to this field is topology specific: - This field has meaning if topology has layer three presence. - Ror bridge at AP this field has no meaning and set 0.0.0.0.
                 topologyIPMask 1.3.6.1.4.1.4329.15.3.4.1.1.1.9 ipaddress read-write
Mask for topology's IP address. This field is only applicable to those topologies that have IP address assigned to them, otherwise it is set either to 255.255.255.255 or 0.0.0.0.
                 topologyMTUsize 1.3.6.1.4.1.4329.15.3.4.1.1.1.10 unsigned32 read-write
Default MTU size for the topology. This field is only configurable for a topologies that has layer three presence.
                 topologyGateway 1.3.6.1.4.1.4329.15.3.4.1.1.1.11 ipaddress read-write
Gateway associated to this topology. This field has meaning for a topology that has layer three presence.
                 topologyDHCPUsage 1.3.6.1.4.1.4329.15.3.4.1.1.1.12 integer read-write
The type of DHCP to be used for IP address assignment to associated MU. This field has meaning only if the topology has layer three persense. Meaning associated to this field is topology specific: - For Admin topology (management port) has no meaning. - Ror bridge at AP this field has no meaning. - For all other topologies that their layer three presence is enabled this field is configurable. Enumeration: 'useRelay': 1, 'none': 0, 'localServer': 2.
                 topologyAPRegistration 1.3.6.1.4.1.4329.15.3.4.1.1.1.13 truthvalue read-write
If set to true, then AP registration can be achieved using via this topology. Meaning associated to this field is topology specific: - Always false for Admin (management port) and routed topologies - Always false and has no meaning for bridge at AP topology. - For physical and bridge at controller type topologies that have layer three presence this field can be set to either true or false.
                 topologyManagementTraffic 1.3.6.1.4.1.4329.15.3.4.1.1.1.14 truthvalue read-write
If set to true, then management data traffic is allowed on this topology. Meaning associated to this field is topology specific: - Always true for Admin topology (management port) - Has no meaning for bridge at AP type topologies - For all other topologies that have layer three presence this field can be set to either true or false.
                 topologySynchronize 1.3.6.1.4.1.4329.15.3.4.1.1.1.15 truthvalue read-write
If set to true, then topology must be synchronized with peer controller in availability mode operation. Meaning associated to this field is topology specific: - Always false for Admin topology (management port) - Has no meaning for topologies associated to physical ports. - For all other topologies: bridge at controller, routed and bridge at AP type topologies this field can be set to either true or false.
                 topologySyncGateway 1.3.6.1.4.1.4329.15.3.4.1.1.1.16 ipaddress read-write
Gateway associated to synchronized topology. This field has meaning for those topologies that their topologySynchornize field is set to true.
                 topologySyncMask 1.3.6.1.4.1.4329.15.3.4.1.1.1.17 ipaddress read-write
Mask of synchronized gateway IP address. This field has meaning for those topologies that their topologySynchornize field is set to true.
                 topologySyncIPStart 1.3.6.1.4.1.4329.15.3.4.1.1.1.18 ipaddress read-write
Range of IP addresses assigned to remote synchronized topology. This IP address represents starting IP address. This field has meaning for those topologies that their topologySynchornize field is set to true.
                 topologySyncIPEnd 1.3.6.1.4.1.4329.15.3.4.1.1.1.19 ipaddress read-write
Range of IP addresses assigned to remote synchronized topology. This IP address represents ending IP address. This field has meaning for those topologies that their topologySynchornize field is set to true.
                 topologyStaticIPv6Address 1.3.6.1.4.1.4329.15.3.4.1.1.1.20 displaystring read-write
Statically configured IPv6 address assigned to the admin port.
                 topologyLinkLocalIPv6Address 1.3.6.1.4.1.4329.15.3.4.1.1.1.21 displaystring read-only
Automatically generated link-local IPv6 address assigned to the admin port.
                 topologyPreFixLength 1.3.6.1.4.1.4329.15.3.4.1.1.1.22 unsigned32 read-write
The prfix length of the statically configured IPv6 address of the topology.
                 topologyIPv6Gateway 1.3.6.1.4.1.4329.15.3.4.1.1.1.23 displaystring read-write
The gateway of IPv6 address that is associated to the admin topology.
                 topologyDynamicEgress 1.3.6.1.4.1.4329.15.3.4.1.1.1.24 integer read-write
Enable/disable dynamic egress for this topology. Dynamic egress allows a station to receive from this VLAN if it can send to this VLAN. Enumeration: 'enable': 1, 'disable': 0.
                 topologyIsGroup 1.3.6.1.4.1.4329.15.3.4.1.1.1.25 integer read-write
When this flag is yes, this means the topology is created as a group topology. Enumeration: 'yes': 1, 'no': 0.
                 topologyGroupMembers 1.3.6.1.4.1.4329.15.3.4.1.1.1.26 octet string read-write
This field specifies the topologies for this group. This field has meaning only when topologyIsGroup is set to 1. This field is represented as octect string. The most significant bit of the most significant octet of the octet string represents the first topology with topologyID = 0 and second most significant bit of the most significant octet represents the second topology with topologyID = 1 and so on.
                 topologyMemberId 1.3.6.1.4.1.4329.15.3.4.1.1.1.27 integer32 read-write
-1 : Means this topology is not a member of a group topology. valid topology ID : Means this topology is a member of a configured group topology that has this group topology ID.
     topologyStat 1.3.6.1.4.1.4329.15.3.4.2
         topoStatTable 1.3.6.1.4.1.4329.15.3.4.2.1 no-access
Statistics describing traffic transmitted or received for a single topology. This is the traffic on the topology that is coming from or going to destinations on the wired network.
             topoStatEntry 1.3.6.1.4.1.4329.15.3.4.2.1.1 no-access
Statistic related an entry in topology table.
                 topoStatName 1.3.6.1.4.1.4329.15.3.4.2.1.1.1 displaystring read-only
Topology name.
                 topoStatTxPkts 1.3.6.1.4.1.4329.15.3.4.2.1.1.2 counter64 read-only
Number of packets transmitted to the wired network on the topology/vlan.
                 topoStatRxPkts 1.3.6.1.4.1.4329.15.3.4.2.1.1.3 counter64 read-only
Number of packets received from the wired network on the topology/vlan.
                 topoStatTxOctets 1.3.6.1.4.1.4329.15.3.4.2.1.1.4 counter64 read-only
Number of octets transmitted in frames to the wired network on the topology/vlan.
                 topoStatRxOctets 1.3.6.1.4.1.4329.15.3.4.2.1.1.5 counter64 read-only
Number of octets received in frames from the wired network on the topology/vlan.
                 topoStatMulticastTxPkts 1.3.6.1.4.1.4329.15.3.4.2.1.1.6 counter64 read-only
Number of multicast frames transmitted to the wired network on the topology/vlan.
                 topoStatMulticastRxPkts 1.3.6.1.4.1.4329.15.3.4.2.1.1.7 counter64 read-only
Number of multicast frames received from the wired network on the topology/vlan.
                 topoStatBroadcastTxPkts 1.3.6.1.4.1.4329.15.3.4.2.1.1.8 counter64 read-only
Number of broadcast frames transmitted to the wired network on the topology/vlan.
                 topoStatBroadcastRxPkts 1.3.6.1.4.1.4329.15.3.4.2.1.1.9 counter64 read-only
Number of broadcast frames received from the wired network on the topology/vlan.
                 topoStatFrameChkSeqErrors 1.3.6.1.4.1.4329.15.3.4.2.1.1.10 counter64 read-only
Number of frames with checksum errors received from the wired network on the topology/vlan.
                 topoStatFrameTooLongErrors 1.3.6.1.4.1.4329.15.3.4.2.1.1.11 counter64 read-only
Number of oversized frames received from the wired network on the topology/vlan.
         topoExceptionStatTable 1.3.6.1.4.1.4329.15.3.4.2.2 no-access
The table contains list of exception-specific filters statistics for configured topologies in EWC.
             topoExceptionStatEntry 1.3.6.1.4.1.4329.15.3.4.2.2.1 no-access
An entry in topology exception statistic table.
                 topoExceptionFiterName 1.3.6.1.4.1.4329.15.3.4.2.2.1.1 octet string read-write
Exception filter name.
                 topoExceptionStatPktsDenied 1.3.6.1.4.1.4329.15.3.4.2.2.1.2 counter64 read-only
Number of packets that were denied by defined filters since device's last restart.
                 topoExceptionStatPktsAllowed 1.3.6.1.4.1.4329.15.3.4.2.2.1.3 counter64 read-only
Number packets that were allowed by defined filters since device's last restart.
         topoWireStatTable 1.3.6.1.4.1.4329.15.3.4.2.3 no-access
The table contains statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for each topology
             topoWireStatEntry 1.3.6.1.4.1.4329.15.3.4.2.3.1 no-access
Statistics describing traffic transmitted or received unencapsulated (i.e. not wrapped in WASSP) for a single topology. This is the traffic on the topology that is coming from or going to destinations on the wired network other than to the controller's APs.
                 topoWireStatName 1.3.6.1.4.1.4329.15.3.4.2.3.1.1 displaystring read-only
Topology name.
                 topoWireStatTxPkts 1.3.6.1.4.1.4329.15.3.4.2.3.1.2 counter64 read-only
Number of packets transmitted unencapsulated to the wired network on the topology/vlan.
                 topoWireStatRxPkts 1.3.6.1.4.1.4329.15.3.4.2.3.1.3 counter64 read-only
Number of packets received unencapsulated from the wired network on the topology/vlan.
                 topoWireStatTxOctets 1.3.6.1.4.1.4329.15.3.4.2.3.1.4 counter64 read-only
Number of octets transmitted in unencapsulated frames to the wired network on the topology/vlan.
                 topoWireStatRxOctets 1.3.6.1.4.1.4329.15.3.4.2.3.1.5 counter64 read-only
Number of octets received in unencapsulated frames to the wired network on the topology/vlan.
                 topoWireStatMulticastTxPkts 1.3.6.1.4.1.4329.15.3.4.2.3.1.6 counter64 read-only
Number of multicast frames transmitted unencapsulated to the wired network on the topology/vlan.
                 topoWireStatMulticastRxPkts 1.3.6.1.4.1.4329.15.3.4.2.3.1.7 counter64 read-only
Number of multicast frames received unencapsulated from the wired network on the topology/vlan.
                 topoWireStatBroadcastTxPkts 1.3.6.1.4.1.4329.15.3.4.2.3.1.8 counter64 read-only
Number of broadcast frames transmitted unencapsulated to the wired network on the topology/vlan.
                 topoWireStatBroadcastRxPkts 1.3.6.1.4.1.4329.15.3.4.2.3.1.9 counter64 read-only
Number of broadcast frames received unencapsulated from the wired network on the topology/vlan.
                 topoWireStatFrameChkSeqErrors 1.3.6.1.4.1.4329.15.3.4.2.3.1.10 counter64 read-only
Number of unencapsulated frames with checksum errors received from the wired network on the topology/vlan.
                 topoWireStatFrameTooLongErrors 1.3.6.1.4.1.4329.15.3.4.2.3.1.11 counter64 read-only
Number of unencapsulated frames with length longer than permitted received from the wired network on the topology/vlan.
         topoCompleteStatTable 1.3.6.1.4.1.4329.15.3.4.2.4 no-access
The table contains statistics describing traffic transmitted and received for each topology on both the wired side and the wireless side.
             topoCompleteStatEntry 1.3.6.1.4.1.4329.15.3.4.2.4.1 no-access
Statistics describing traffic transmitted and received on a single topology on both the wired side and the wireless side.
                 topoCompleteStatName 1.3.6.1.4.1.4329.15.3.4.2.4.1.1 displaystring read-only
Topology name.
                 topoCompleteStatTxPkts 1.3.6.1.4.1.4329.15.3.4.2.4.1.2 counter64 read-only
Number of packets transmitted to the wired and wireless networks on the topology/vlan.
                 topoCompleteStatRxPkts 1.3.6.1.4.1.4329.15.3.4.2.4.1.3 counter64 read-only
Number of packets received from the wired and wireless networks on the topology/vlan.
                 topoCompleteStatTxOctets 1.3.6.1.4.1.4329.15.3.4.2.4.1.4 counter64 read-only
Number of octets transmitted in frames to the wired and wireless networks on the topology/vlan.
                 topoCompleteStatRxOctets 1.3.6.1.4.1.4329.15.3.4.2.4.1.5 counter64 read-only
Number of octets received in frames from the wired and wireless networks on the topology/vlan.
                 topoCompleteStatMulticastTxPkts 1.3.6.1.4.1.4329.15.3.4.2.4.1.6 counter64 read-only
Number of multicast frames transmitted to the wired and wireless networks on the topology/vlan.
                 topoCompleteStatMulticastRxPkts 1.3.6.1.4.1.4329.15.3.4.2.4.1.7 counter64 read-only
Number of multicast frames received from the wired and wireless networks on the topology/vlan.
                 topoCompleteStatBroadcastTxPkts 1.3.6.1.4.1.4329.15.3.4.2.4.1.8 counter64 read-only
Number of broadcast frames transmitted to the wired and wireless networks on the topology/vlan.
                 topoCompleteStatBroadcastRxPkts 1.3.6.1.4.1.4329.15.3.4.2.4.1.9 counter64 read-only
Number of broadcast frames received from the wired and wireless networks on the topology/vlan.
                 topoCompleteStatFrameChkSeqErrors 1.3.6.1.4.1.4329.15.3.4.2.4.1.10 counter64 read-only
Number of frames with checksum errors received from the wired and wireless networks on the topology/vlan.
                 topoCompleteStatFrameTooLongErrors 1.3.6.1.4.1.4329.15.3.4.2.4.1.11 counter64 read-only
Number of oversized frames received from the wired and wireless networks on the topology/vlan.
 accessPoints 1.3.6.1.4.1.4329.15.3.5
     apConfigObjects 1.3.6.1.4.1.4329.15.3.5.1
         apCount 1.3.6.1.4.1.4329.15.3.5.1.1 integer32 read-only
The count of currently configured AccessPoints associated with this WirelessController.
         apTable 1.3.6.1.4.1.4329.15.3.5.1.2 no-access
Contains a list of all configured APs associated with the Wireless Controller.
             apEntry 1.3.6.1.4.1.4329.15.3.5.1.2.1 no-access
Configuration information for an access point.
                 apIndex 1.3.6.1.4.1.4329.15.3.5.1.2.1.1 integer32 read-write
Table index for the access point.
                 apName 1.3.6.1.4.1.4329.15.3.5.1.2.1.2 displaystring read-write
Access Point's name.
                 apDesc 1.3.6.1.4.1.4329.15.3.5.1.2.1.3 displaystring read-write
Text description of the AP.
                 apSerialNumber 1.3.6.1.4.1.4329.15.3.5.1.2.1.4 octet string read-only
16-character serial number of the AccessPoint.
                 apPortifIndex 1.3.6.1.4.1.4329.15.3.5.1.2.1.5 interfaceindex read-write
ifIndex of the physical port to which this AP is assigned.
                 apWiredIfIndex 1.3.6.1.4.1.4329.15.3.5.1.2.1.6 interfaceindex read-write
ifIndex of the wired interface on the AP.
                 apSoftwareVersion 1.3.6.1.4.1.4329.15.3.5.1.2.1.7 octet string read-only
Software version currently installed on the AP.
                 apSpecific 1.3.6.1.4.1.4329.15.3.5.1.2.1.8 object identifier read-only
A link back to the OID under the hiPathWirelessProducts branch that identifies the specific version of this AP.
                 apBroadcastDisassociate 1.3.6.1.4.1.4329.15.3.5.1.2.1.9 truthvalue read-write
True indicates that the AP should broadcast disassociation requests, False indicates unicast.
                 apRowStatus 1.3.6.1.4.1.4329.15.3.5.1.2.1.10 rowstatus read-write
RowStatus for the apTable.
                 apVlanID 1.3.6.1.4.1.4329.15.3.5.1.2.1.11 integer32 read-write
VLAN tag for the packets trasmitted to/from Access Point. Value ranges: (-1) it is not tagged, zero(0) means reserved, 1-4094 tag value.
                 apIpAssignmentType 1.3.6.1.4.1.4329.15.3.5.1.2.1.12 integer read-write
IP address assignment type, dhcp(1) = uses DHCP to obtain IP address, static(2) = static IP address is assigned to the access point. Enumeration: 'dhcp': 1, 'static': 2.
                 apIfMAC 1.3.6.1.4.1.4329.15.3.5.1.2.1.13 macaddress read-only
Acess Point's wired interface MAC address.
                 apIPAddress 1.3.6.1.4.1.4329.15.3.5.1.2.1.14 ipaddress read-write
Access Point's wired interface IP address.
                 apHwVersion 1.3.6.1.4.1.4329.15.3.5.1.2.1.17 displaystring read-write
Text description of Access Point's hardware version.
                 apSwVersion 1.3.6.1.4.1.4329.15.3.5.1.2.1.18 displaystring read-write
Text description of Access Point's major software version.
                 apEnvironment 1.3.6.1.4.1.4329.15.3.5.1.2.1.19 integer read-write
Access Point's environment. Enumeration: 'outdoor': 2, 'indoor': 1.
                 apHome 1.3.6.1.4.1.4329.15.3.5.1.2.1.20 integer read-write
Local session is created when access point registers directly with the controller. Foreign session is mirrored session created via availability feature. Enumeration: 'local': 1, 'foreign': 2.
                 apRole 1.3.6.1.4.1.4329.15.3.5.1.2.1.21 integer read-write
Indicates whether Access Point is a traffic fordwarder, sensor or guardian Enumeration: 'guardian': 3, 'sensor': 2, 'accessPoint': 1.
                 apState 1.3.6.1.4.1.4329.15.3.5.1.2.1.22 integer read-write
Active means that access point has registered with this controller at some point of time and still has active connection with this controller. This variable has meaning in the context of the controller that query is done. Inactive mean access point has lost the connection with this controller. Enumeration: 'active': 1, 'inactive': 2.
                 apStatus 1.3.6.1.4.1.4329.15.3.5.1.2.1.23 integer read-write
Registration state for the access point at the time of query, approved(1) means the registration was completed, pending(2) means access point has registered but waiting manual approval from admin. Enumeration: 'approved': 1, 'pending': 2.
                 apPollTimeout 1.3.6.1.4.1.4329.15.3.5.1.2.1.24 gauge32 read-write
Duration after which the access point's connection to controller is considered has been lost if polling fails.
                 apPollInterval 1.3.6.1.4.1.4329.15.3.5.1.2.1.25 gauge32 read-write
Interval between each poll sent to the controller.
                 apTelnetAccess 1.3.6.1.4.1.4329.15.3.5.1.2.1.26 integer read-write
Indicates whether telnet access is enabled/disabled. This value only applys to AP26xx, W788, W786 and AP4102x APs. 1 : Enabled. 2 : Disabled. 3 : Telnet is not supported. Enumeration: 'disabled': 2, 'na': 3, 'enabled': 1.
                 apMaintainClientSession 1.3.6.1.4.1.4329.15.3.5.1.2.1.27 truthvalue read-write
If true, Access Point maintains client's session in the event of poll failure.
                 apRestartServiceContAbsent 1.3.6.1.4.1.4329.15.3.5.1.2.1.28 truthvalue read-write
If true, Access Point restarts the service in the absence of controller.
                 apHostname 1.3.6.1.4.1.4329.15.3.5.1.2.1.29 displaystring read-only
Hostname assigned to Access Point.
                 apLocation 1.3.6.1.4.1.4329.15.3.5.1.2.1.30 displaystring read-write
Text identifying location of the access point.
                 apStaticMTUsize 1.3.6.1.4.1.4329.15.3.5.1.2.1.31 unsigned32 read-write
Configured MTU size for the access point. Access point will use the lower value of MTU size between statically configured MTU size and dynamically learned MTU size.
                 apSiteID 1.3.6.1.4.1.4329.15.3.5.1.2.1.32 integer32 read-write
The site ID, as defined in siteTable, that this AP is member of. The value of -1 indicates that AP is not member of any site.
                 apZone 1.3.6.1.4.1.4329.15.3.5.1.2.1.33 displaystring read-write
The Zone to which the Access Point belongs.
                 apLLDP 1.3.6.1.4.1.4329.15.3.5.1.2.1.34 truthvalue read-write
Enable or disable broadcasting of LLDP information by the wireless AP.
                 apSSHAccess 1.3.6.1.4.1.4329.15.3.5.1.2.1.35 truthvalue read-write
Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs.
                 apLEDMode 1.3.6.1.4.1.4329.15.3.5.1.2.1.36 integer read-write
LED status field for the Access Point. off(0): LED is set to off for the AP. wdsSignalStrength(1): LED conveys the strength of the singal, for the details please refer to user manual. indentify(2): Can be used to lacate the AP by making AP to flashing LED repeatedly. normal(3): This indicates AP's normal operational mode. Enumeration: 'identify': 2, 'off': 0, 'wdsSignalStrength': 1, 'normal': 3.
                 apLocationbasedService 1.3.6.1.4.1.4329.15.3.5.1.2.1.37 truthvalue read-write
Enable or disable the AeroScout or Ekahau location-based service for the Wireless AP.
                 apSecureTunnel 1.3.6.1.4.1.4329.15.3.5.1.2.1.38 truthvalue read-write
Enable or disable Secure Tunnel between Ap and Controller
                 apEncryptCntTraffic 1.3.6.1.4.1.4329.15.3.5.1.2.1.39 truthvalue read-write
Enable or disable encrypt of control traffic between AP & Controller. This value has meaning only if apSecureTunnel is enabled.
                 apMICErrorWarning 1.3.6.1.4.1.4329.15.3.5.1.2.1.40 truthvalue read-write
Enable or disable MIC error warning generation.
                 apSecureDataTunnelType 1.3.6.1.4.1.4329.15.3.5.1.2.1.41 integer read-write
secure data tunnel status between controller and acesss point. disable(0): disable encryption of control and data traffic between AP & Controller. encryptControlTraffic(1): encrypt control traffic between AP & Controller. encryptControlDataTraffic(2): encrypt control and data traffic between AP & Controller. debugMode(3): preserve keys without encryption. Enumeration: 'encryptControlTraffic': 1, 'debugMode': 3, 'disable': 0, 'encryptControlDataTraffic': 2.
                 apIPMulticastAssembly 1.3.6.1.4.1.4329.15.3.5.1.2.1.42 truthvalue read-write
Enable or disable fragmentation/reassembly of the IP Multicast frames transmitted over the tunnel between AP and Controller. When set to true, an IP Multicast frame larger than the tunnel MTU will be fragmented when it is placed into the WASSP tunnel and reassembled on the receiving end of the tunnel before being forwarded to the clients.
                 apSSHConnection 1.3.6.1.4.1.4329.15.3.5.1.2.1.43 integer read-write
Enable or Disable SSH access to the Wireless AP. This value only applys to AP36xx, AP37xx, W788C and W786C APs. 1 : Enabled. 2 : Disabled. 3 : SSH is not supported. Enumeration: 'disabled': 2, 'na': 3, 'enabled': 1.
         apRadioTable 1.3.6.1.4.1.4329.15.3.5.1.3 no-access
Table access point radio configuration information.
             apRadioEntry 1.3.6.1.4.1.4329.15.3.5.1.3.1 no-access
Configuration information for a radio on the access point.
                 apRadioFrequency 1.3.6.1.4.1.4329.15.3.5.1.3.1.1 integer read-only
The frequency of the radio as supported by the hardware. Supported frequencies are either of 2.5Ghz or 5.0Ghz. Enumeration: 'freq24GHz': 2, 'freq50GHz': 1.
                 apRadioNumber 1.3.6.1.4.1.4329.15.3.5.1.3.1.2 unsigned32 read-only
Access point radios are numbered from 1 in increasing order. This numbering is limited in the context of AP. This field returns the radio number of the AP indexed by apIndex.
                 apRadioType 1.3.6.1.4.1.4329.15.3.5.1.3.1.3 integer read-write
Indicates the type of radio (a, a/n, a/c, n-strict, c-strict, b, g, b/g, or b/g/n) as it is configured. Enumeration: 'dot11bg': 6, 'dot11gn': 7, 'off': 0, 'dot11j': 10, 'dot11gnStrict': 9, 'dot11g': 5, 'dot11anc': 11, 'dot11b': 4, 'dot11a': 1, 'dot11an': 2, 'dot11bgn': 8, 'dot11cStrict': 12, 'dot11anStrict': 3.
                 apRadioProtocol 1.3.6.1.4.1.4329.15.3.5.1.3.1.4 bits read-write
Enumerates the possible types of 802.11 radio protocols. Bits: 'dot1124g': 1, 'dot1124b': 0, 'dot1124n': 2, 'dot1150n': 6, 'dot1150ac': 4, 'dot1150j': 5, 'dot1150a': 3.
         radioVNSTable 1.3.6.1.4.1.4329.15.3.5.1.4 no-access
Table of VNSs the radio is participating in.
             radioVNSEntry 1.3.6.1.4.1.4329.15.3.5.1.4.1 no-access
Information for a single VNS entry.
                 radioIfIndex 1.3.6.1.4.1.4329.15.3.5.1.4.1.1 interfaceindex read-write
Radio participating in the VNS.
                 vnsIfIndex 1.3.6.1.4.1.4329.15.3.5.1.4.1.2 interfaceindex read-write
ifIndex for the VNS the radio is participating.
                 radioVNSRowStatus 1.3.6.1.4.1.4329.15.3.5.1.4.1.3 rowstatus read-write
RowStatus for the radioVNSTable.
         apFastFailoverEnable 1.3.6.1.4.1.4329.15.3.5.1.5 truthvalue read-write
True indicates that Fast Failover feature is enabled at AP.
         apLinkTimeout 1.3.6.1.4.1.4329.15.3.5.1.6 integer32 read-write
Time to deteck link failure. The value is in 1-30 seconds.
         apAntennaTable 1.3.6.1.4.1.4329.15.3.5.1.7 no-access
Contains a list of antennas configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only.
             apAntennaEntry 1.3.6.1.4.1.4329.15.3.5.1.7.1 no-access
An entry in this table identifying attributes of one antenna for an AP.
                 apAntennaIndex 1.3.6.1.4.1.4329.15.3.5.1.7.1.1 unsigned32 no-access
Index of an antenna inside an AP.
                 apAntennanName 1.3.6.1.4.1.4329.15.3.5.1.7.1.2 displaystring read-only
Textual description identifying the antenna.
                 apAntennaType 1.3.6.1.4.1.4329.15.3.5.1.7.1.3 displaystring read-write
Textual description of antenna type selected for that antenna.
         apRadioAntennaTable 1.3.6.1.4.1.4329.15.3.5.1.8 no-access
Contains a list of Radio configured for each AP associated with the Wireless Controller. All elements in this table are predefined and read-only.
             apRadioAntennaEntry 1.3.6.1.4.1.4329.15.3.5.1.8.1 no-access
An entry in this table identifying attributes of one radio for an AP.
                 apRadioAntennaType 1.3.6.1.4.1.4329.15.3.5.1.8.1.3 displaystring read-only
Textual description of antenna type selected for that radio.
                 apRadioAntennaModel 1.3.6.1.4.1.4329.15.3.5.1.8.1.4 unsigned32 read-only
Antenna type. 0 indicates internal antenna. 1 indicates no antenna. Other value indicates specific external antenna type.
                 apRadioAttenuation 1.3.6.1.4.1.4329.15.3.5.1.8.1.5 integer32 read-write
Cumulative attenuation (in dB) of all components (cables, attenuators) between the radio port and the antenna. A professional installer must configure this value so it does not violate country regulations and must verify that it reflects the actual installed components. If this field value is set to -1, then this radio does not support the attenuation configuration.
     apStatsObjects 1.3.6.1.4.1.4329.15.3.5.2
         apActiveCount 1.3.6.1.4.1.4329.15.3.5.2.1 integer32 read-only
The count of active AccessPoints associated with this WirelessController.
         apStatsTable 1.3.6.1.4.1.4329.15.3.5.2.2 no-access
Table of statistics for the access points.
             apStatsEntry 1.3.6.1.4.1.4329.15.3.5.2.2.1 no-access
Statistics for an access point.
                 apInUcastPkts 1.3.6.1.4.1.4329.15.3.5.2.2.1.1 counter64 read-only
Number of unicast packets from wireless-to-wired network.
                 apInNUcastPkts 1.3.6.1.4.1.4329.15.3.5.2.2.1.2 counter64 read-only
Number of non-unicast packets from wireless-to-wired network.
                 apInOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.3 counter64 read-only
Number of octets from wireless-to-wired network.
                 apInErrors 1.3.6.1.4.1.4329.15.3.5.2.2.1.4 counter64 read-only
Number of error packets from wireless-to-wired network.
                 apInDiscards 1.3.6.1.4.1.4329.15.3.5.2.2.1.5 counter64 read-only
Number of discarded packets from wireless-to-wired network.
                 apOutUcastPkts 1.3.6.1.4.1.4329.15.3.5.2.2.1.6 counter64 read-only
Number of unicast packets from wired-to-wireless network.
                 apOutNUcastPkts 1.3.6.1.4.1.4329.15.3.5.2.2.1.7 counter64 read-only
Number of non-unicast packets from wired-to-wireless network.
                 apOutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.8 counter64 read-only
Number of octets from wired-to-wireless network.
                 apOutErrors 1.3.6.1.4.1.4329.15.3.5.2.2.1.9 counter64 read-only
Number of error packets from wired-to-wireless network.
                 apOutDiscards 1.3.6.1.4.1.4329.15.3.5.2.2.1.10 counter64 read-only
Number of discarded packets from wired-to-wireless network.
                 apUpTime 1.3.6.1.4.1.4329.15.3.5.2.2.1.11 timeticks read-only
The time (in hundredths of a second) since the management portion of the access point was last re-initialized.
                 apCredentialType 1.3.6.1.4.1.4329.15.3.5.2.2.1.12 integer read-only
Supported certificate type used by AP for commnuication. none(0) = not supported, TLS(1) = Trasport Layer Security (TLS), PEAP(2) = Protected Extensible Authentication Protocol, all(2) = supports all supported EAP. Enumeration: 'tls': 1, 'none': 0, 'all': 3, 'peap': 2.
                 apCertificateExpiry 1.3.6.1.4.1.4329.15.3.5.2.2.1.13 timeticks read-only
The number of timeticks from January, 1st, 1970 to the date when the certificate expires (issued certificate no longer is valid).
                 apStatsMuCounts 1.3.6.1.4.1.4329.15.3.5.2.2.1.14 unsigned32 read-only
Number of MUs currently associated with this AP.
                 apStatsSessionDuration 1.3.6.1.4.1.4329.15.3.5.2.2.1.15 timeticks read-only
Elapse time since the access point's session has started.
                 apTotalStationsA 1.3.6.1.4.1.4329.15.3.5.2.2.1.16 unsigned32 read-only
Number of MUs that are currently associated to this AP using dot11 connection mode 'a'.
                 apTotalStationsB 1.3.6.1.4.1.4329.15.3.5.2.2.1.17 unsigned32 read-only
Number of MUs that are currently associated to this AP using dot11 connection mode 'b'.
                 apTotalStationsG 1.3.6.1.4.1.4329.15.3.5.2.2.1.18 unsigned32 read-only
Number of MUs that are currently associated to this AP using dot11 connection mode 'g'.
                 apTotalStationsN50 1.3.6.1.4.1.4329.15.3.5.2.2.1.19 unsigned32 read-only
Number of MUs that are currently associated to this AP using dot11 connection mode 'n 5.0 Ghz'.
                 apTotalStationsN24 1.3.6.1.4.1.4329.15.3.5.2.2.1.20 unsigned32 read-only
Number of MUs that are currently associated to this AP using dot11 connection mode 'n 2.4 Ghz'.
                 apInvalidPolicyCount 1.3.6.1.4.1.4329.15.3.5.2.2.1.21 unsigned32 read-only
Number of invalid role has been assigned to the AP
                 apInterfaceMTU 1.3.6.1.4.1.4329.15.3.5.2.2.1.22 unsigned32 read-only
The AP's configured ethernet interface MTU size in bytes.
                 apEffectiveTunnelMTU 1.3.6.1.4.1.4329.15.3.5.2.2.1.23 unsigned32 read-only
The AP Effective Tunnel MTU determines the maximum length of the frames that can be tunnelled without fragmentation, after subtracting the tunnel headers (WASSP and IPSEC). The AP Effective Tunnel MTU is determined for each AP tunnel as minimum between the Static MTU (configurable) and Dynamic MTU (learned from the ICMP path discovery).
                 apTotalStationsAC 1.3.6.1.4.1.4329.15.3.5.2.2.1.24 unsigned32 read-only
Number of MUs that are currently associated to this AP using dot11ac connection mode.
                 apTotalStationsAInOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.25 counter64 read-only
Number of octets from client to AP for clients using protocol 802.11a.
                 apTotalStationsAOutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.26 counter64 read-only
Number of octets from AP to client for clients using protocol 802.11a.
                 apTotalStationsBInOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.27 counter64 read-only
Number of octets from client to AP for clients using protocol 802.11b.
                 apTotalStationsBOutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.28 counter64 read-only
Number of octets from AP to client for clients using protocol 802.11b.
                 apTotalStationsGInOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.29 counter64 read-only
Number of octets from client to AP for clients using protocol 802.11g.
                 apTotalStationsGOutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.30 counter64 read-only
Number of octets from AP to client for clients using protocol 802.11g.
                 apTotalStationsN50InOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.31 counter64 read-only
Number of octets from client to AP for clients using protocol 802.11n (5Ghz).
                 apTotalStationsN50OutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.32 counter64 read-only
Number of octets from AP to client for clients using protocol 802.11n (5Ghz).
                 apTotalStationsN24InOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.33 counter64 read-only
Number of octets from client to AP for clients using protocol 802.11n (2.4Ghz).
                 apTotalStationsN24OutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.34 counter64 read-only
Number of octets from AP to client for clients using protocol 802.11n (2.4Ghz).
                 apTotalStationsACInOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.35 counter64 read-only
Number of octets from client to AP for clients using protocol 802.11ac.
                 apTotalStationsACOutOctets 1.3.6.1.4.1.4329.15.3.5.2.2.1.36 counter64 read-only
Number of octets from AP to client for clients using protocol 802.11ac.
         apRegistrationRequests 1.3.6.1.4.1.4329.15.3.5.2.3 counter32 read-only
Total registration request have been received by all access points since last reboot.
         apRadioStatusTable 1.3.6.1.4.1.4329.15.3.5.2.4 no-access
Table of radio configuration attributes that the AP can change dynamically. It contains one entry for each radio of each active AP.
             apRadioStatusEntry 1.3.6.1.4.1.4329.15.3.5.2.4.1 no-access
The configuration attributes of one AP radio that the AP can change dynamically.
                 apRadioStatusChannel 1.3.6.1.4.1.4329.15.3.5.2.4.1.1 unsigned32 read-only
The lowest 20 MHz channel of the 20/40/80 MHz wide channel on which the radio is operating. This can be different from the administratively configured channel as a result of the AP complying with regulatory requirements like DFS or adapting to the RF environment (e.g. DCS). If this field value is set to 0, then this means this radio is off or this AP is in Guardian mode.
                 apRadioStatusChannelWidth 1.3.6.1.4.1.4329.15.3.5.2.4.1.2 integer read-only
Maximum width of the channel being served by the AP's radio. The AP may select a different channel width from the administratively configured width in order to comply with regulatory requirements and the current RF environment. Enumeration: 'width80Mhz': 4, 'width20Mhz': 1, 'width40Mhz': 2.
                 apRadioStatusChannelOffset 1.3.6.1.4.1.4329.15.3.5.2.4.1.3 unsigned32 read-only
This is the offset (in 20 MHz channels) of the primary channel from the lowest 20 MHz channel within an aggregated channel. The offset can be 0 if the primary channel is the same as the lowest channel or it can be 1,2 or 3 depending on the aggregate channel width. The AP may select a different channel width from the administratively configured width in order to comply with regulatory requirements and the current RF environment.
         apPerformanceReportByRadioTable 1.3.6.1.4.1.4329.15.3.5.2.5 no-access
Table of AP performance statistics by radio that the AP can change dynamically. It contains one entry for each radio of each active AP.
             apPerformanceReportByRadioEntry 1.3.6.1.4.1.4329.15.3.5.2.5.1 no-access
The AP radio performance statistics of one AP radio.
                 apRadioIndex 1.3.6.1.4.1.4329.15.3.5.2.5.1.1 integer32 no-access
Index of an radio inside an AP.
                 apPerfRadioPrevPeakChannelUtilization 1.3.6.1.4.1.4329.15.3.5.2.5.1.2 gauge32 read-only
Peak channel utilization in % from last 15 minute interval.
                 apPerfRadioCurPeakChannelUtilization 1.3.6.1.4.1.4329.15.3.5.2.5.1.3 gauge32 read-only
Peak channel utilization in % of current 15 minute interval.
                 apPerfRadioAverageChannelUtilization 1.3.6.1.4.1.4329.15.3.5.2.5.1.4 hundredthofgauge32 read-only
Running average of channel utilization in hundredth of a %.
                 apPerfRadioCurrentChannelUtilization 1.3.6.1.4.1.4329.15.3.5.2.5.1.5 gauge32 read-only
Channel utilization in % from latest statistics from AP.
                 apPerfRadioPrevPeakRSS 1.3.6.1.4.1.4329.15.3.5.2.5.1.6 gauge32 read-only
Peak RSS in dBm from last 15 minute interval. Value of -100 means this field is not available.
                 apPerfRadioCurPeakRSS 1.3.6.1.4.1.4329.15.3.5.2.5.1.7 gauge32 read-only
Peak RSS in dBm of current 15 minute interval. Value of -100 means this field is not available.
                 apPerfRadioAverageRSS 1.3.6.1.4.1.4329.15.3.5.2.5.1.8 hundredthofint32 read-only
Running average of RSS in hundredth of a dBm. Value of -10000 means this field is not available.
                 apPerfRadioCurrentRSS 1.3.6.1.4.1.4329.15.3.5.2.5.1.9 gauge32 read-only
RSS in dBm from latest statistics from AP. Value of -100 means this field is not available.
                 apPerfRadioPrevPeakSNR 1.3.6.1.4.1.4329.15.3.5.2.5.1.10 gauge32 read-only
Peak SNR in dB from last 15 minute interval. Value of -100 means this field is not available.
                 apPerfRadioCurPeakSNR 1.3.6.1.4.1.4329.15.3.5.2.5.1.11 gauge32 read-only
Peak SNR in dB of current 15 minute interval. Value of -100 means this field is not available.
                 apPerfRadioAverageSNR 1.3.6.1.4.1.4329.15.3.5.2.5.1.12 hundredthofint32 read-only
Running average of SNR in hundredth of a dB. Value of -10000 means this field is not available.
                 apPerfRadioCurrentSNR 1.3.6.1.4.1.4329.15.3.5.2.5.1.13 gauge32 read-only
SNR in dB from latest statistics from AP. Value of -100 means this field is not available.
                 apPerfRadioPrevPeakPktRetx 1.3.6.1.4.1.4329.15.3.5.2.5.1.14 hundredthofgauge64 read-only
Peak packet retransmissions in hundredth of pps from last 15 minute interval.
                 apPerfRadioCurPeakPktRetx 1.3.6.1.4.1.4329.15.3.5.2.5.1.15 hundredthofgauge64 read-only
Peak packet retransmissions in hundredth of pps of current 15 minute interval.
                 apPerfRadioAveragePktRetx 1.3.6.1.4.1.4329.15.3.5.2.5.1.16 hundredthofgauge64 read-only
Running average of packet retransmissions in hundredth of pps.
                 apPerfRadioCurrentPktRetx 1.3.6.1.4.1.4329.15.3.5.2.5.1.17 hundredthofgauge64 read-only
Packet retransmissions in hundredth of pps from latest statistics from AP.
                 apPerfRadioPktRetx 1.3.6.1.4.1.4329.15.3.5.2.5.1.18 counter64 read-only
Running counter of number of packet retransmissions.
         apAccessibilityTable 1.3.6.1.4.1.4329.15.3.5.2.6 no-access
A table showing the rate of associations, reassociations and deauthentications/dissassociations from each AP radio. The table contains one row per radio per active AP.
             apAccessibilityEntry 1.3.6.1.4.1.4329.15.3.5.2.6.1 no-access
The accessibility statistics of one AP radio.
                 apAccPrevPeakAssocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.1 hundredthofgauge64 read-only
Peak number of association requests in hundredth of requests per second received by AP from last 15 minute interval.
                 apAccCurPeakAssocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.2 hundredthofgauge64 read-only
Peak number of association requests in hundredth of requests per second received by AP of current 15 minute interval.
                 apAccAverageAssocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.3 hundredthofgauge64 read-only
Running average of association requests in hundredth of requests per second received by an AP radio.
                 apAccCurrentAssocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.4 hundredthofgauge64 read-only
Association requests in hundredth of requests per second from latest statistics from AP.
                 apAccAssocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.5 counter64 read-only
Running counter of association requests.
                 apAccPrevPeakReassocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.6 hundredthofgauge64 read-only
Peak number of re-association requests in hundredth of requests per second received by an AP radio from last 15 minute interval.
                 apAccCurPeakReassocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.7 hundredthofgauge64 read-only
Peak number of re-association requests in hundredth of requests per second received by an AP radio of current 15 minute interval.
                 apAccAverageReassocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.8 hundredthofgauge64 read-only
Running average of re-association requests in hundredth of requests per second received by an AP radio.
                 apAccCurrentReassocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.9 hundredthofgauge64 read-only
Re-association requests in hundredth of requests per second received by an AP radio from latest statistics from AP.
                 apAccReassocReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.10 counter64 read-only
Running counter of re-association requests received by an AP radio.
                 apAccPrevPeakDisassocDeauthReqTx 1.3.6.1.4.1.4329.15.3.5.2.6.1.11 hundredthofgauge64 read-only
Peak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from last 15 minute interval.
                 apAccCurPeakDisassocDeauthReqTx 1.3.6.1.4.1.4329.15.3.5.2.6.1.12 hundredthofgauge64 read-only
Peak number of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio of current 15 minute interval.
                 apAccAverageDisassocDeauthReqTx 1.3.6.1.4.1.4329.15.3.5.2.6.1.13 hundredthofgauge64 read-only
Running average of disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio.
                 apAccCurrentDisassocDeauthReqTx 1.3.6.1.4.1.4329.15.3.5.2.6.1.14 hundredthofgauge64 read-only
Disassociation/deauthentication requests in hundredth of requests per second transmitted by an AP radio from latest statistics from AP.
                 apAccDisassocDeauthReqTx 1.3.6.1.4.1.4329.15.3.5.2.6.1.15 counter64 read-only
Running counter of disassociation/deauthentication requests transmitted by an AP radio.
                 apAccPrevPeakDisassocDeauthReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.16 hundredthofgauge64 read-only
Peak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from last 15 minute interval.
                 apAccCurPeakDisassocDeauthReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.17 hundredthofgauge64 read-only
Peak number of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio of current 15 minute interval.
                 apAccAverageDisassocDeauthReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.18 hundredthofgauge64 read-only
Running average of disassociation/deauthentication requests in hundredth of requests per second received by an AP radio.
                 apAccCurrentDisassocDeauthReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.19 hundredthofgauge64 read-only
Disassociation/deauthentication requests in hundredth of requests per second received by an AP radio from latest statistics from AP.
                 apAccDisassocDeauthReqRx 1.3.6.1.4.1.4329.15.3.5.2.6.1.20 counter64 read-only
Running counter of disassociation/deauthentication requests received by an AP radio.
         apPerformanceReportbyRadioAndWlanTable 1.3.6.1.4.1.4329.15.3.5.2.7 no-access
Table of AP performance statistics by AP, AP radio and WLAN.
             apPerformanceReportbyRadioAndWlanEntry 1.3.6.1.4.1.4329.15.3.5.2.7.1 no-access
The AP performance statistics of one AP radio and WLAN.
                 apPerfWlanPrevPeakClientsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.1 gauge32 read-only
Peak clients per second from last 15 minute interval.
                 apPerfWlanCurPeakClientsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.2 gauge32 read-only
Peak clients per second of current 15 minute interval.
                 apPerfWlanAverageClientsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.3 hundredthofgauge32 read-only
Running average of clients in hundredth of clients per second.
                 apPerfWlanCurrentClientsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.4 gauge32 read-only
Clients per second from latest statistics from AP.
                 apPerfWlanPrevPeakULOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.5 hundredthofgauge64 read-only
Peak uplink octets in hundredth of octets per second from last 15 minute interval.
                 apPerfWlanCurPeakULOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.6 hundredthofgauge64 read-only
Peak uplink octets in hundredth of octets per second of current 15 minute interval.
                 apPerfWlanAverageULOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.7 hundredthofgauge64 read-only
Running average of uplink hundredth of octets per second.
                 apPerfWlanCurrentULOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.8 hundredthofgauge64 read-only
Uplink octets in hundredth of octets per second from latest statistics from AP.
                 apPerfWlanULOctets 1.3.6.1.4.1.4329.15.3.5.2.7.1.9 counter64 read-only
Running counter of uplink octets per second.
                 apPerfWlanPrevPeakULPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.10 hundredthofgauge64 read-only
Peak uplink packets in hundredth of packets per second from last 15 minute interval.
                 apPerfWlanCurPeakULPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.11 hundredthofgauge64 read-only
Peak uplink packets in hundredth of packets per second of current 15 minute interval.
                 apPerfWlanAverageULPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.12 hundredthofgauge64 read-only
Running average of uplink packets in hundredth of packets per second.
                 apPerfWlanCurrentULPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.13 hundredthofgauge64 read-only
Uplink packets in hundredth of packets per second from latest statistics from AP.
                 apPerfWlanULPkts 1.3.6.1.4.1.4329.15.3.5.2.7.1.14 counter64 read-only
Running counter of uplink packets per second.
                 apPerfWlanPrevPeakDLOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.15 hundredthofgauge64 read-only
Peak downlink octets in hundredth of octets per second from last 15 minute interval.
                 apPerfWlanCurPeakDLOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.16 hundredthofgauge64 read-only
Peak downlink octets in hundredth of octets per second of current 15 minute interval.
                 apPerfWlanAverageDLOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.17 hundredthofgauge64 read-only
Running average of downlink octets in hundredth of octets per second.
                 apPerfWlanCurrentDLOctetsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.18 hundredthofgauge64 read-only
Downlink octets in hundredth octets per second from latest statistics from AP.
                 apPerfWlanDLOctets 1.3.6.1.4.1.4329.15.3.5.2.7.1.19 counter64 read-only
Running counter of downlink octets per second.
                 apPerfWlanPrevPeakDLPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.20 hundredthofgauge64 read-only
Peak downlink packets in hundredth of packets per second from last 15 minute interval.
                 apPerfWlanCurPeakDLPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.21 hundredthofgauge64 read-only
Peak downlink packets in hundredth of packets per second of current 15 minute interval.
                 apPerfWlanAverageDLPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.22 hundredthofgauge64 read-only
Running average of downlink packets in hundredth of packets per second.
                 apPerfWlanCurrentDLPktsPerSec 1.3.6.1.4.1.4329.15.3.5.2.7.1.23 hundredthofgauge64 read-only
Downlink packets in hundredth of packets per second from latest statistics from AP.
                 apPerfWlanDLPkts 1.3.6.1.4.1.4329.15.3.5.2.7.1.24 counter64 read-only
Running counter of downlink packets per second.
         apChannelUtilizationTable 1.3.6.1.4.1.4329.15.3.5.2.8 no-access
Table of AP utilization by channel that the AP can change dynamically. It contains one entry for each radio and channel of each active AP.
             apChannelUtilizationEntry 1.3.6.1.4.1.4329.15.3.5.2.8.1 no-access
The AP performance statistics of one AP radio and channel.
                 channel 1.3.6.1.4.1.4329.15.3.5.2.8.1.1 unsigned32 no-access
Channel on which utilization is measured.
                 apChnlUtilPrevPeakUtilization 1.3.6.1.4.1.4329.15.3.5.2.8.1.2 gauge32 read-only
Peak channel utilization in % from last 15 minute interval.
                 apChnlUtilCurPeakUtilization 1.3.6.1.4.1.4329.15.3.5.2.8.1.3 gauge32 read-only
Peak channel utilization in % of current 15 minute interval.
                 apChnlUtilAverageUtilization 1.3.6.1.4.1.4329.15.3.5.2.8.1.4 hundredthofgauge32 read-only
Running average of channel utilization in hundredth of %.
                 apChnlUtilCurrentUtilization 1.3.6.1.4.1.4329.15.3.5.2.8.1.5 gauge32 read-only
Channel utilization in % from latest statistics from AP.
         apNeighboursTable 1.3.6.1.4.1.4329.15.3.5.2.9 no-access
A table showing the BSSID, RSS, operating radio channel and detailed information of a nearby AP. The table contains one row per nearby AP per radio per active AP.
             apNeighboursEntry 1.3.6.1.4.1.4329.15.3.5.2.9.1 no-access
The configuration attributes of one nearby AP.
                 nearbyApIndex 1.3.6.1.4.1.4329.15.3.5.2.9.1.1 unsigned32 no-access
Nearby AP index.
                 nearbyApInfo 1.3.6.1.4.1.4329.15.3.5.2.9.1.2 displaystring read-only
Detailed information of a nearby AP.
                 nearbyApBSSID 1.3.6.1.4.1.4329.15.3.5.2.9.1.3 octet string read-only
The BSSID of a nearby AP.
                 nearbyApChannel 1.3.6.1.4.1.4329.15.3.5.2.9.1.4 displaystring read-only
The operating radio channel of a nearby AP.
                 nearbyApRSS 1.3.6.1.4.1.4329.15.3.5.2.9.1.5 integer32 read-only
The Received Signal Strength of a nearby AP.
     sensorManagement 1.3.6.1.4.1.4329.15.3.5.3
         tftpSever 1.3.6.1.4.1.4329.15.3.5.3.1 displaystring read-write
TFTP server that sensor image resides.
         imagePath26xx 1.3.6.1.4.1.4329.15.3.5.3.2 displaystring read-write
Path of sensor image on TFTP server.
         imagePath36xx 1.3.6.1.4.1.4329.15.3.5.3.3 displaystring read-write
Path of sensor image on TFTP server.
         imageVersionOfap26xx 1.3.6.1.4.1.4329.15.3.5.3.4 displaystring read-write
Sensor's software version.
         imageVersionOfngap36xx 1.3.6.1.4.1.4329.15.3.5.3.5 displaystring read-write
Sensor's softerware version for Next Generation Access Point.
     apRegistration 1.3.6.1.4.1.4329.15.3.5.4
         apRegSecurityMode 1.3.6.1.4.1.4329.15.3.5.4.1 integer read-write
Indicates registration mode for an AP. If allowAll(1), then all wireless APs are allowed to register to the controlloer, otherwise only approved APs in 'Approved AP' list are allowed to register to the controller. Enumeration: 'allowAll': 1, 'allowApprovedOnes': 2.
         apRegDiscoveryRetries 1.3.6.1.4.1.4329.15.3.5.4.2 unsigned32 read-write
Number of retries for discovery requests from an access point to controller. After these number of retries, the access point will start over again after some arbitrary delays.
         apRegDiscoveryInterval 1.3.6.1.4.1.4329.15.3.5.4.3 unsigned32 read-write
Interval between two consecutive discovery requests from the same access point.
         apRegTelnetPassword 1.3.6.1.4.1.4329.15.3.5.4.4 octet string read-write
Password used to access an AP via telnet. This field is write-only and read access returns empty string.
         apRegSSHPassword 1.3.6.1.4.1.4329.15.3.5.4.5 octet string read-write
SSH password used to access an access point. This field is write-only and read access returns empty string.
         apRegUseClusterEncryption 1.3.6.1.4.1.4329.15.3.5.4.6 truthvalue read-write
If this field set to true, then all APs in the cluster use cluster encryption.
         apRegClusterSharedSecret 1.3.6.1.4.1.4329.15.3.5.4.7 octet string read-write
Password for cluster encryption. This field is write-only and read access returns empty string.
     loadBalancing 1.3.6.1.4.1.4329.15.3.5.5
         loadGroupTable 1.3.6.1.4.1.4329.15.3.5.5.1 no-access
Table of configured load groups for access points. A set of access points can be grouped together and they are identified by unique name. An access point can only be assigned to one group.
             loadGroupEntry 1.3.6.1.4.1.4329.15.3.5.5.1.1 no-access
An entry containing definition of a load group. There exists two types of load group: client-balancing-group and radio-balancing-group.
                 loadGroupID 1.3.6.1.4.1.4329.15.3.5.5.1.1.1 unsigned32 read-only
Internally generated ID for a group and cannot be changed externally.
                 loadGroupName 1.3.6.1.4.1.4329.15.3.5.5.1.1.2 displaystring read-write
Unique name assigned to the group.
                 loadGroupType 1.3.6.1.4.1.4329.15.3.5.5.1.1.3 integer read-write
Type of load balancing this group supports. Enumeration: 'radioBalancing': 1, 'clientBalancing': 0.
                 loadGroupBandPreference 1.3.6.1.4.1.4329.15.3.5.5.1.1.4 integer read-write
Band preference is enabled for this group if this field is set to true and group type is set to radioBalancing(1). Enumeration: 'disabled': 0, 'enabled': 1.
                 loadGroupLoadControl 1.3.6.1.4.1.4329.15.3.5.5.1.1.5 integer read-write
Load balancing is enabled for this group if this field is set to true and group type is set to radioBalancing(1). Enumeration: 'disabled': 0, 'enabled': 1.
                 loadGroupClientCountRadio1 1.3.6.1.4.1.4329.15.3.5.5.1.1.6 unsigned32 read-write
Maximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type.
                 loadGroupClientCountRadio2 1.3.6.1.4.1.4329.15.3.5.5.1.1.7 unsigned32 read-write
Maximum number of client on this radio. This field is only applicable to a group with radioBalancing(1) type.
                 loadGroupLoadControlEnableR1 1.3.6.1.4.1.4329.15.3.5.5.1.1.8 integer read-write
If it is enabled then load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. Enumeration: 'disabled': 0, 'enabled': 1.
                 loadGroupLoadControlEnableR2 1.3.6.1.4.1.4329.15.3.5.5.1.1.9 integer read-write
If it is enabled then load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. Enumeration: 'disabled': 0, 'enabled': 1.
                 loadGroupLoadControlStrictLimitR1 1.3.6.1.4.1.4329.15.3.5.5.1.1.10 integer read-write
If it is enabled then strict limit for load control is applicable to radio #1 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. Enumeration: 'disabled': 0, 'enabled': 1.
                 loadGroupLoadControlStrictLimitR2 1.3.6.1.4.1.4329.15.3.5.5.1.1.11 integer read-write
If it is enabled then strict limit for load control is applicable to radio #2 of all access points that are assigned to this load group. This field has meaning only for the load group that is of radioBalancing(1) type. Enumeration: 'disabled': 0, 'enabled': 1.
         loadGrpRadiosTable 1.3.6.1.4.1.4329.15.3.5.5.2 no-access
Table of radio assignment to defined load groups.
             loadGrpRadiosEntry 1.3.6.1.4.1.4329.15.3.5.5.2.1 no-access
Any entry defining radio assignment of AP, identified by apIndex, to a load group identified by loadGroupID.
                 loadGrpRadiosRadio1 1.3.6.1.4.1.4329.15.3.5.5.2.1.2 integer read-write
If this field is set to 'assigned(1)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanaceID. For radio blanacing group, either all or none of the radios of a specific AP (indentified by apIndex) are assigned to the load balancing group. Enumeration: 'assigned': 1, 'notApplicable': 0, 'unassigned': 2.
                 loadGrpRadiosRadio2 1.3.6.1.4.1.4329.15.3.5.5.2.1.3 integer read-write
If this field is set to 'assigned(2)', then the radio of the AP identified by the apIndex is a member of the load balancing group identified by the loadBlanaceID. For radio blanacing group, either all or none of the radios of a specific AP (indentified by apIndex) are assigned to the load balancing group. Enumeration: 'assigned': 1, 'notApplicable': 0, 'unassigned': 2.
         loadGrpWlanTable 1.3.6.1.4.1.4329.15.3.5.5.3 no-access
Table of WLAN assignment to defined load groups.
             loadGrpWlanEntry 1.3.6.1.4.1.4329.15.3.5.5.3.1 no-access
An entry defining WLAN, identified by wlanID, assignment to a load group identified by loadGroupID.
                 loadGrpWlanAssigned 1.3.6.1.4.1.4329.15.3.5.5.3.1.1 truthvalue read-write
Assignement of WLAN, identified with wlanID, to the load balancing group identified bye loadGroupID.
     apMaintenanceCycle 1.3.6.1.4.1.4329.15.3.5.6
         schedule 1.3.6.1.4.1.4329.15.3.5.6.1 integer read-write
AP maintenance schedule options. 0 : never perform the maintenance action. 1 : perform the maintenance action every day. 2 : perform the maintenance action every week. 3 : perform the maintenance action every month. Enumeration: 'monthly': 3, 'never': 0, 'daily': 1, 'weekly': 2.
         startHour 1.3.6.1.4.1.4329.15.3.5.6.2 integer32 read-write
Maintenance action starts at this hour of the day.
         startMinute 1.3.6.1.4.1.4329.15.3.5.6.3 integer32 read-write
Maintenance action starts at this minute of the hour.
         duration 1.3.6.1.4.1.4329.15.3.5.6.4 integer32 read-write
Duration of the AP maintenance cycle (how often maintenance is done) in hours.
         recurrenceDaily 1.3.6.1.4.1.4329.15.3.5.6.5 integer read-write
This field has meaning only when the maintenance schedule option is set to daily(1). Below is the recurrence option. 0 : every day. 1 : every weekday. 2 : every weekend. Enumeration: 'everyWeekday': 1, 'everyWeekend': 2, 'everyDay': 0.
         recurrenceWeekly 1.3.6.1.4.1.4329.15.3.5.6.6 bits read-write
This field has meaning only when the maintenance schedule option is set to weekly(2). Below are the recurrence options. BIT 0 : Sunday. BIT 1 : Monday. BIT 2 : Tuesday. BIT 3 : Wednesday. BIT 4 : Thursday. BIT 5 : Friday. BIT 6 : Saturday. Bits: 'monday': 1, 'tuesday': 2, 'friday': 5, 'wednesday': 3, 'thursday': 4, 'sunday': 0, 'saturday': 6.
         recurrenceMonthly 1.3.6.1.4.1.4329.15.3.5.6.7 bits read-write
This field has meaning only when the maintenance schedule option is set to monthly(3). Below are the recurrence options. BIT 0 : the first week of the month. BIT 1 : the second week of the month. BIT 2 : the third week of the month. BIT 3 : the fourth week of the month. BIT 4 : the fifth week of the month. BIT 5 : sunday of the week. BIT 6 : monday of the week. BIT 7 : tuesday of the week. BIT 8 : wednesday of the week. BIT 9 : thursday of the week. BIT 10 : friday of the week. BIT 11 : saturday of the week. Bits: 'monday': 6, 'third': 2, 'tuesday': 7, 'friday': 10, 'second': 1, 'thursday': 9, 'wednesday': 8, 'sunday': 5, 'fourth': 3, 'saturday': 11, 'fifth': 4, 'first': 0.
         apPlatforms 1.3.6.1.4.1.4329.15.3.5.6.8 bits read-write
Select which models of the AP platforms to perform the maintenance. BIT 0 : AP2600 platform. BIT 1 : AP2605 platform. BIT 2 : AP2650 platform. BIT 3 : AP4102 platform. BIT 4 : W786 platform. BIT 5 : AP3705 platform. BIT 6 : AP3710 platform. BIT 7 : AP3715 platform. BIT 8 : AP3765 platform. BIT 9 : AP3767 platform. BIT 10 : AP3801 platform. BIT 11 : AP3805 platform. BIT 12 : AP3825 platform. BIT 13 : AP3865 platform. BIT 14 : AP3935 platform. BIT 15 : AP3965 platform. BIT 16 : W78XC platform. BIT 17 : W78XCSFP platform. Bits: 'ap3935': 14, 'ap4102': 3, 'ap2650': 2, 'ap3710': 6, 'ap2600': 0, 'ap2605': 1, 'ap3715': 7, 'w78xc': 16, 'ap3801': 10, 'ap3705': 5, 'ap3825': 12, 'ap3765': 8, 'ap3805': 11, 'ap3767': 9, 'w786': 4, 'ap3965': 15, 'w78xcsfp': 17, 'ap3865': 13.
 mobileUnits 1.3.6.1.4.1.4329.15.3.6
     mobileUnitCount 1.3.6.1.4.1.4329.15.3.6.1 integer32 read-write
Number of clients associated with the controller.
     muTable 1.3.6.1.4.1.4329.15.3.6.2 no-access
Table of information for clients associated with the EWC.
         muEntry 1.3.6.1.4.1.4329.15.3.6.2.1 no-access
Information for a client associated with the EWC.
             muMACAddress 1.3.6.1.4.1.4329.15.3.6.2.1.1 macaddress read-only
Client MAC address.
             muIPAddress 1.3.6.1.4.1.4329.15.3.6.2.1.2 ipaddress read-only
Client IP Address.
             muUser 1.3.6.1.4.1.4329.15.3.6.2.1.3 octet string read-only
Client login name.
             muState 1.3.6.1.4.1.4329.15.3.6.2.1.4 truthvalue read-only
True if the client is authenticated.
             muAPSerialNo 1.3.6.1.4.1.4329.15.3.6.2.1.5 octet string read-only
Serial Number of the Access Point the client is associated with.
             muVnsSSID 1.3.6.1.4.1.4329.15.3.6.2.1.6 octet string read-only
SSID of the VNS the client is associated with.
             muTxPackets 1.3.6.1.4.1.4329.15.3.6.2.1.7 counter64 read-only
Number of packets trasmitted to the client.
             muRxPackets 1.3.6.1.4.1.4329.15.3.6.2.1.8 counter64 read-only
Number of packets received from the client.
             muTxOctets 1.3.6.1.4.1.4329.15.3.6.2.1.9 counter64 read-only
Number of octets transmitted to the client.
             muRxOctets 1.3.6.1.4.1.4329.15.3.6.2.1.10 counter64 read-only
Number of octets received from the client.
             muDuration 1.3.6.1.4.1.4329.15.3.6.2.1.11 counter64 read-only
Time client has been associated with the EWC.
             muAPName 1.3.6.1.4.1.4329.15.3.6.2.1.12 displaystring read-only
Name of the Access Point the client is associated with.
             muTopologyName 1.3.6.1.4.1.4329.15.3.6.2.1.13 displaystring read-only
Topology name that the MU is associated with.
             muPolicyName 1.3.6.1.4.1.4329.15.3.6.2.1.14 displaystring read-only
The name of the policy that provides filter for this MU.
             muDefaultCoS 1.3.6.1.4.1.4329.15.3.6.2.1.15 displaystring read-only
The CoS that is applied to the current traffic if the defined rule for the current traffic has not specifically defined any CoS.
             muConnectionProtocol 1.3.6.1.4.1.4329.15.3.6.2.1.16 integer read-only
The MU is using this connection protocol for current connection. Symbols notation: n50 = an = n5.0Ghz, n24 = bgn = n2.4Ghz Enumeration: 'a': 1, 'ac': 6, 'b': 3, 'g': 2, 'unknown': 0, 'n50': 4, 'n24': 5.
             muConnectionCapability 1.3.6.1.4.1.4329.15.3.6.2.1.17 integer read-only
This field indicates what are the MU connection capability. Enumeration: 'a': 1, 'bg': 2, 'abg': 3, 'unknown': 0, 'bgn': 5, 'an': 4.
             muWLANID 1.3.6.1.4.1.4329.15.3.6.2.1.18 unsigned32 read-only
ID of the WLAN that the MU is associated with.
             muBSSIDMac 1.3.6.1.4.1.4329.15.3.6.2.1.19 macaddress read-only
Client BSSID MAC address.
             muDot11ConnectionCapability 1.3.6.1.4.1.4329.15.3.6.2.1.20 bits read-write
This field indicates what are the MU connection capabilities. bit 0 : If this bit is set, the client is capable to tx/rx on A radio. bit 1 : If this bit is set, the client is capable to tx/rx on BG radio. bit 2 : If this bit is set, the client is capable of wpaV1 privacy. bit 3 : If this bit is set, the client is capable of wpaV2 privacy. bit 4 : If this bit is set, the client is capable to comunicate with 1 data stream. bit 5 : If this bit is set, the client is capable to comunicate with 2 data streams. bit 6 : If this bit is set, the client is capable to comunicate with 3 data streams. bit 7 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The voice client can synchronize the transmission and reception of voice frames with the AP. bit 8 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The video client can synchronize the transmission and reception of video frames with the AP. bit 9 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The client can synchronize the transmission and reception in background queue. bit 10 : If this bit is set, the client is capable of Unscheduled automatic power-save delivery (U-APSD) benefits. The client can synchronize the transmission and reception in best effort queue. bit 11 : If this bit is set, the client is capable of Wi-Fi Multimedia(WMM) power save. bit 12 : If this bit is set, the client is capable of 802.11n Greenfield mode. bit 13 : If this bit is set, the client is on fast-transition mode. Bits: 'uapsdBesteffort': 10, 'dot1124': 1, 'dot1150': 0, 'greenfield': 12, 'threeSteam': 6, 'uapsdBackground': 9, 'uapsdVideo': 8, 'twoStream': 5, 'wpaV1': 2, 'wpaV2': 3, 'uapsdVoice': 7, 'wmm': 11, 'fastTransition': 13, 'oneStream': 4.
     muTSPECTable 1.3.6.1.4.1.4329.15.3.6.3 no-access
Table of information for Admission Control Statistics by active client.
         muTSPECEntry 1.3.6.1.4.1.4329.15.3.6.3.1 no-access
Information for Admission Control Statistics by active client.
             tspecMuMACAddress 1.3.6.1.4.1.4329.15.3.6.3.1.1 macaddress read-only
Client MAC address.
             tspecAC 1.3.6.1.4.1.4329.15.3.6.3.1.2 integer read-only
Access Category, such as Best Effort, Background, Voice, Video, and Reserved. Enumeration: 'be': 0, 'vi': 2, 'vo': 3, 'tvo': 4, 'nwme': 5, 'bk': 1.
             tspecDirection 1.3.6.1.4.1.4329.15.3.6.3.1.3 integer read-only
Traffic direction, such as uplink direction, downlink direction. Enumeration: 'reserved': 2, 'dnlink': 1, 'uplink': 0, 'bidir': 3.
             tspecApSerialNumber 1.3.6.1.4.1.4329.15.3.6.3.1.4 octet string read-only
16-character serial number of the AccessPoint.
             tspecMuIPAddress 1.3.6.1.4.1.4329.15.3.6.3.1.5 ipaddress read-only
Client IP Address.
             tspecBssMac 1.3.6.1.4.1.4329.15.3.6.3.1.6 macaddress read-only
Access Point BSSID.
             tspecSsid 1.3.6.1.4.1.4329.15.3.6.3.1.7 displaystring read-only
VNS SSID.
             tspecMDR 1.3.6.1.4.1.4329.15.3.6.3.1.8 unsigned32 read-only
Mean Data Rate (bytes per second).
             tspecNMS 1.3.6.1.4.1.4329.15.3.6.3.1.9 unsigned32 read-only
Nominal MSDU size (bytes).
             tspecSBA 1.3.6.1.4.1.4329.15.3.6.3.1.10 unsigned32 read-only
Surplus Bandwidth Allowance.
             tspecDlRate 1.3.6.1.4.1.4329.15.3.6.3.1.11 displaystring read-only
Downlink Rate (bytes per second).
             tspecUlRate 1.3.6.1.4.1.4329.15.3.6.3.1.12 displaystring read-only
Uplink Rate (bytes per second).
             tspecDlViolations 1.3.6.1.4.1.4329.15.3.6.3.1.13 displaystring read-only
Downlink Violations (bytes per second).
             tspecUlViolations 1.3.6.1.4.1.4329.15.3.6.3.1.14 displaystring read-only
Uplink Violations (bytes per second).
             tspecProtocol 1.3.6.1.4.1.4329.15.3.6.3.1.15 integer read-only
802.11 radio protocol. Enumeration: 'proto80211a': 1, 'proto80211an': 4, 'proto80211b': 3, 'proto80211bgn': 5, 'proto80211g': 2.
     muACLType 1.3.6.1.4.1.4329.15.3.6.4 integer read-write
MUs can access EWC by sending association request and providing proper credentials. However, EWC allows creation of a master list of a blacklist or a whitelist group to control such access. There can exist only a blacklist or a whitelist (mutually exclusive) at any time. The list of MUs belonging to such a list is populated in muACLTable. The muACLTable content can be interpreted in conjunction with this field as follows: - blacklist(1): MUs listed in muACLTable cannot access EWC resources. - whitelist(2): Only MUs listed in muACLTable can access EWC resources. Enumeration: 'blacklist': 1, 'whitelist': 2.
     muACLTable 1.3.6.1.4.1.4329.15.3.6.5 no-access
Semantics of this list is directly related to muACLType. Access Control List(ACL) is list of MUs and their access rights. An MU can either belong to 'Blacklist', in that case its association request is denied, or it can belong to 'Whitelist', in that case it is allowed to associate to EWC provided having proper credentials.
         muACLEntry 1.3.6.1.4.1.4329.15.3.6.5.1 no-access
An entry about an MU and its ACL.
             muACLMACAddress 1.3.6.1.4.1.4329.15.3.6.5.1.1 macaddress read-only
MAC address of MU.
             muACLRowStatus 1.3.6.1.4.1.4329.15.3.6.5.1.2 rowstatus read-only
An MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy.
     muAccessListTable 1.3.6.1.4.1.4329.15.3.6.6 no-access
Semantics of this list is directly related to muACLType. Access List Control(ACL) list of MUs and their access rights. An MU can either belong to 'Blacklist', in that case its association request is denied, or it can belong to 'Whitelist', in that case it is allowed to associate to EWC provided having proper credentials.
         muAccessListEntry 1.3.6.1.4.1.4329.15.3.6.6.1 no-access
An entry about about an MU and its ACL.
             muAccessListMACAddress 1.3.6.1.4.1.4329.15.3.6.6.1.1 macaddress read-only
MAC address of MU.
             muAccessListBitmaskLength 1.3.6.1.4.1.4329.15.3.6.6.1.2 integer read-only
Length of bitmask associated to the MAC address in the entry. Enumeration: 'bits36': 36, 'bits48': 48, 'bits24': 24.
             muAccessListRowStatus 1.3.6.1.4.1.4329.15.3.6.6.1.3 rowstatus read-only
An MU can either be added or removed to this list, therefore, allowed set values for this field are: createAndGo, destroy.
 associations 1.3.6.1.4.1.4329.15.3.7
     assocCount 1.3.6.1.4.1.4329.15.3.7.1 integer32 read-write
Total number of current client associations to the access point.
     assocTable 1.3.6.1.4.1.4329.15.3.7.2 no-access
Table of information about clients associated with the access point.
         assocEntry 1.3.6.1.4.1.4329.15.3.7.2.1 no-access
Information for a single client in the association table.
             assocMUMacAddress 1.3.6.1.4.1.4329.15.3.7.2.1.1 macaddress read-only
MAC address of the client.
             assocStartSysUpTime 1.3.6.1.4.1.4329.15.3.7.2.1.2 timeticks read-only
The system uptime that client became associated with the access point.
             assocTxPackets 1.3.6.1.4.1.4329.15.3.7.2.1.3 counter64 read-only
Nubmer of tx packets to the client.
             assocRxPackets 1.3.6.1.4.1.4329.15.3.7.2.1.4 counter64 read-only
Number of received packets from the client.
             assocTxOctets 1.3.6.1.4.1.4329.15.3.7.2.1.5 counter64 read-only
Number of octets sent to the client.
             assocRxOctets 1.3.6.1.4.1.4329.15.3.7.2.1.6 counter64 read-only
Number of octets received from the client.
             assocDuration 1.3.6.1.4.1.4329.15.3.7.2.1.7 integer32 read-write
Length of time since last association.
             assocVnsIfIndex 1.3.6.1.4.1.4329.15.3.7.2.1.8 interfaceindex read-only
Index of VNS to which the MU is associated with.
 protocols 1.3.6.1.4.1.4329.15.3.8
     wassp 1.3.6.1.4.1.4329.15.3.8.1
 logNotifications 1.3.6.1.4.1.4329.15.3.9
     logEventSeverityThreshold 1.3.6.1.4.1.4329.15.3.9.1 logeventseverity read-write
Specifies the minimum level at which the SNMP agent will send notifications for log events. I.e., setting this value to 'major' will send notifcations for critical and major log events. Setting the threshold to minor will trap critical, major, and minor events.
     logEventSeverity 1.3.6.1.4.1.4329.15.3.9.3 logeventseverity read-only
Contains the severity of the most recently trapped hiPathWirelessLogAlarm notification.
     logEventComponent 1.3.6.1.4.1.4329.15.3.9.4 octet string read-only
Contains the component which sent the most recently trapped hiPathWirelessLogAlarm notification.
     logEventDescription 1.3.6.1.4.1.4329.15.3.9.5 octet string read-only
Contains the description of the most recently trapped hiPathWirelessLogAlarm.
     hiPathWirelessLogAlarm 1.3.6.1.4.1.4329.15.3.9.6
Components of an alarm.
 sites 1.3.6.1.4.1.4329.15.3.10
       siteMaxEntries 1.3.6.1.4.1.4329.15.3.10.1 unsigned32 read-only
The maximum number of entries allowed in the siteTable. This value is platform dependent.
       siteNumEntries 1.3.6.1.4.1.4329.15.3.10.2 unsigned32 read-only
The current number of entries in the siteTable.
       siteTableNextAvailableIndex 1.3.6.1.4.1.4329.15.3.10.3 unsigned32 read-only
This object indicates the numerically lowest available index within this entity, which may be used for the value of siteID in the creation of a new entry in the siteTable. An index is considered available if the index value falls within the range of 1 to siteMaxEntries value and is not being used to index an existing entry in the siteTable contained within this entity. This value should only be considered a guideline for management creation of siteEntries, there is no requirement on management to create entries based upon this index value.
       siteTable 1.3.6.1.4.1.4329.15.3.10.4 no-access
A site is a logical entity that is constituted by collection of APs, CoS rules, policies, Radius server, WLAN, etc. A site is identified by a unique name.
           siteEntry 1.3.6.1.4.1.4329.15.3.10.4.1 no-access
Definition of a site.
               siteID 1.3.6.1.4.1.4329.15.3.10.4.1.1 unsigned32 read-only
An unique ID, identifying the site in the context of the controller. The site ID can be an integer value from 1 to the maximum number of APs supported by the EWC.
               siteRowStatus 1.3.6.1.4.1.4329.15.3.10.4.1.2 rowstatus read-only
Row status for the entry.
               siteName 1.3.6.1.4.1.4329.15.3.10.4.1.3 displaystring read-only
Textual description to identify the site in the context of the controller.
               siteLocalRadiusAuthentication 1.3.6.1.4.1.4329.15.3.10.4.1.4 truthvalue read-only
If this value is set to true, then the RADIUS client is on APs, otherwise the RADIUS client is on controller.
               siteDefaultDNSServer 1.3.6.1.4.1.4329.15.3.10.4.1.5 displaystring read-only
If the APs associated to the site uses DHCP, and DHCP server does not assign DNS server, then this entry will be used for that purpose. Otherwise, if AP is configured with static IP address, then this entry will be used for that purpose.
               siteEnableSecureTunnel 1.3.6.1.4.1.4329.15.3.10.4.1.6 truthvalue read-only
If set to true secure communication key sent to APs to be used to encrypt the traffic between APs within the site and the traffic between controller and APs. However, the encryption itself does not take place unless siteEncryptCommAPtoController and/or siteEncryptCommBetweenAPs set to true.
               siteEncryptCommAPtoController 1.3.6.1.4.1.4329.15.3.10.4.1.7 truthvalue read-only
If set to true, communication between APs within the site and the controller are encrypted using defined encyption. For details about encryption type, please refer to user manual.
               siteEncryptCommBetweenAPs 1.3.6.1.4.1.4329.15.3.10.4.1.8 truthvalue read-only
If set to true, communication between APs within the site are encrypted using defined encyption. For details about encryption type, please refer to user manual.
               siteBandPreferenceEnable 1.3.6.1.4.1.4329.15.3.10.4.1.9 integer read-only
Enabling/disabling band preference for the site and associated APs. By enabling band preference 11a-capable clients can be moved to 11a radio and relieve the congestion on the 11g radio. Band preference provides radio load balancing between 11g and 11a radios. Enumeration: 'enable': 1, 'disable': 0.
               siteLoadControlEnableR1 1.3.6.1.4.1.4329.15.3.10.4.1.10 integer read-only
Enabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #1 by disallowing additional clients on the radio above the configured radio limit. Enumeration: 'enable': 1, 'disable': 0.
               siteLoadControlEnableR2 1.3.6.1.4.1.4329.15.3.10.4.1.11 integer read-only
Enabling/disabling load control for the site for this radio. Load control manages the number of clients on the Radio #2 by disallowing additional clients on the radio above the configured radio limit. Enumeration: 'enable': 1, 'disable': 0.
               siteMaxClientR1 1.3.6.1.4.1.4329.15.3.10.4.1.12 unsigned32 read-only
Maximum number of clients that are allowed to be associated to this radio (radio #1). If the Load Control is not enabled then the maximum for this radio uses default value.
               siteMaxClientR2 1.3.6.1.4.1.4329.15.3.10.4.1.13 unsigned32 read-only
Maximum number of clients that are allowed to be associated to this radio (radio #2). If the Load Control is not enabled then the maximum for this radio uses default value.
               siteStrictLimitEnableR1 1.3.6.1.4.1.4329.15.3.10.4.1.14 integer read-only
Enabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the radio (radio #1) in any circumstances. Otherwise if this field is disabled then the restriction may not be enforced in all circumstances. Enumeration: 'enable': 1, 'disable': 0.
               siteStrictLimitEnableR2 1.3.6.1.4.1.4329.15.3.10.4.1.15 integer read-only
Enabling/disabling strict limit of load control for this radio that is assigned to the site. Eanbleing strict limit enforces configured client limit for the radio (radio #2) in any circumstances. Otherwise if this field is disabled then the restriction may not be enforced in all circumstances. Enumeration: 'enable': 1, 'disable': 0.
               siteReplaceStnIDwithSiteName 1.3.6.1.4.1.4329.15.3.10.4.1.16 truthvalue read-only
If this value is set to true, then the called station ID will be replaced with the site name.
       sitePolicyTable 1.3.6.1.4.1.4329.15.3.10.5 no-access
Each site can have zero or more policies assigned to it. All policies associated to a site are pushed to the all APs belonging to the site. This table defines the assignment of various policies to various sites.
           sitePolicyEntry 1.3.6.1.4.1.4329.15.3.10.5.1 no-access
An entry defining assignment of a policy, identified by sitePolicyID, to a site, identified by siteID.
               sitePolicyID 1.3.6.1.4.1.4329.15.3.10.5.1.1 unsigned32 no-access
The policy index, as defined ENTERASYS-POLICY-PROFILE-MIB::etsysPolicyProfileIndex.
               sitePolicyMember 1.3.6.1.4.1.4329.15.3.10.5.1.2 integer read-write
Indicates whether the policy associated with this row is a member of the zone identified by zoneID. Enumeration: 'notMember': 0, 'isMember': 1.
       siteCosTable 1.3.6.1.4.1.4329.15.3.10.6 no-access
Each site can have zero or more CoS assigned to it. All CoS associated to a site are pushed to the all APs belonging to the site. This table defines the assignment of various CoS to various sites.
           siteCosEntry 1.3.6.1.4.1.4329.15.3.10.6.1 no-access
An entry defining assignment of a CoS, identified by siteCoSID, to a site, identified by siteID.
               siteCoSID 1.3.6.1.4.1.4329.15.3.10.6.1.1 unsigned32 no-access
The CoS index, as defined in ENTERASYS-POLICY-PROFILE-MIB::etsysCosIndex.
               siteCoSMember 1.3.6.1.4.1.4329.15.3.10.6.1.2 integer read-only
Indicates whether the CoS associated with this row is a member of the site identified by siteID. Enumeration: 'notMember': 0, 'isMember': 1.
       siteAPTable 1.3.6.1.4.1.4329.15.3.10.7 no-access
A site can have zero or more Access Points(AP) assigned to it. This table defines the assignment of various APs to various sites.
           siteAPEntry 1.3.6.1.4.1.4329.15.3.10.7.1 no-access
An entry defining assignment of an AP, identified by apIndex, to a site, identified by siteID.
               siteAPMember 1.3.6.1.4.1.4329.15.3.10.7.1.1 integer read-write
Indicates whether the AP associated with this row is a member of the site identified by siteID. Enumeration: 'notMember': 0, 'isMember': 1.
       siteWlanTable 1.3.6.1.4.1.4329.15.3.10.8 no-access
A site can have zero or more WLAN assigned to it. All WLANs that are associated with a site are pushed to the all APs belonging to the site. This table defines the assignment of various WLANs to various sites.
           siteWlanEntry 1.3.6.1.4.1.4329.15.3.10.8.1 no-access
An entry defining assignment of a WLAN identified by siteWlanID, to a site, identified by siteID.
               siteWlanApRadioIndex 1.3.6.1.4.1.4329.15.3.10.8.1.1 integer no-access
Description.
               siteWlanApRadioAssigned 1.3.6.1.4.1.4329.15.3.10.8.1.2 integer read-write
Description. Enumeration: 'notAssigned': 0, 'assigned': 1.
 widsWips 1.3.6.1.4.1.4329.15.3.11
       mitigatorAnalysisEngine 1.3.6.1.4.1.4329.15.3.11.1 integer read-write
Mitigator analysis engine can be enabled/disabled using this variable. All mitigator related objects, objects defined in widsWips subtree, can only be accessed using SNMPv3 provided this variable is set to enable(1) on behalf of users with privacy. Enumeration: 'enable': 1, 'disable': 0.
       scanGroupMaxEntries 1.3.6.1.4.1.4329.15.3.11.2 unsigned32 read-only
Maximum number of scan groups that can be created on the device.
       scanGroupsCurrentEntries 1.3.6.1.4.1.4329.15.3.11.3 unsigned32 read-only
Number of scan groups currently have been created on the device.
       activeThreatsCounts 1.3.6.1.4.1.4329.15.3.11.4 unsigned32 read-only
Number of currently active threats that have been detected.
       friendlyAPCounts 1.3.6.1.4.1.4329.15.3.11.5 unsigned32 read-only
Number of friendly access points that have been discovered at this point.
       uncategorizedAPCounts 1.3.6.1.4.1.4329.15.3.11.6 unsigned32 read-only
Number of uncategorized access points that have been discovered. This value refers to current number not the historical value.
       widsWipsEngineTable 1.3.6.1.4.1.4329.15.3.11.11 no-access
Table of Mitigators defined on set of controllers each identified by widsWipsEngineControllerIPAddress.
             widsWipsEngineEntry 1.3.6.1.4.1.4329.15.3.11.11.1 no-access
One entry in this table identifying a mitigator engine in a defined controller identified by IP address, widsWipsEngineControllerIPAddress.
                 widsWipsEngineRowStatus 1.3.6.1.4.1.4329.15.3.11.11.1.1 rowstatus read-only
RowStatus for creation/deletion of mitigator engine row.
                 widsWipsEngineControllerIPAddress 1.3.6.1.4.1.4329.15.3.11.11.1.2 ipaddress read-only
Ip address of the controller that the defined mitigator in this row will run on.
                 widsWipsEnginePollInterval 1.3.6.1.4.1.4329.15.3.11.11.1.3 integer read-only
Poll interval in seconds between successive keep alive messages between this controller and the mitigator engine to monitor status of mitigator engine.
                 widsWipsEnginePollRetry 1.3.6.1.4.1.4329.15.3.11.11.1.4 integer read-only
Number of consecutive retries of failed contact to a mitigator agent before declaring mitigator engine dead.
       inServiceScanGroupTable 1.3.6.1.4.1.4329.15.3.11.12 no-access
In service scan group enables the subsystem simultaneously scan for threats and performs wireless bridging based on 37xx-based APs. The threats are discovered and identified in the deployment environment and then classified for further actions.
             inServiceScanGroupEntry 1.3.6.1.4.1.4329.15.3.11.12.1 no-access
An entry in this table that defines attributes of a in-service scan group.
                 scanGroupProfileID 1.3.6.1.4.1.4329.15.3.11.12.1.1 unsigned32 no-access
A internally unique identifier for a scan group. Each scan group is indexed by this value.
                 inSrvScanGrpName 1.3.6.1.4.1.4329.15.3.11.12.1.2 displaystring read-only
Textual description identifying the scan group.
                 inSrvScanGrpSecurityThreats 1.3.6.1.4.1.4329.15.3.11.12.1.3 integer read-only
Enable/disable security engine to scan for threats. Enumeration: 'enable': 1, 'disable': 0.
                 inSrvScanGrpMaxConcurrentAttacksPerAP 1.3.6.1.4.1.4329.15.3.11.12.1.4 integer read-only
Max number of concurrent attacks per AP
                 inSrvScanGrpCounterMeasuresType 1.3.6.1.4.1.4329.15.3.11.12.1.5 bits read-only
bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming to friendly APs. bit 2: Setting this bit prevents any station from using an internal honeypot AP. bit 3: Setting this bit prevents any station from using a spoofed AP. bit 4: Setting this bit drops frames in a controlled fashion during a flood attack. bit 5: Setting this bit removes network access from clients originating DoS attacks. bit 6: Setting this bit prevents any station from using an ad hoc mode device. bit 7: Setting this bit prevents any station from using a rogue AP. Bits: 'spoofedAPs': 3, 'dropFloodAttack': 4, 'removeDosAttack': 5, 'internalHoneypotAPs': 2, 'roamingToFriendlyAPs': 1, 'externalHoneypotAPs': 0, 'rogueAP': 7, 'adHocModeDevice': 6.
                 inSrvScanGrpScan2400MHzSelection 1.3.6.1.4.1.4329.15.3.11.12.1.6 bits read-only
bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel Bits: 'frequency2417MHz': 1, 'frequency2452MHz': 8, 'frequency2427MHz': 3, 'frequency2422MHz': 2, 'frequency2412MHz': 0, 'frequency2432MHz': 4, 'frequency2442MHz': 6, 'frequency2467MHz': 11, 'frequency2484MHz': 13, 'frequency2447MHz': 7, 'frequency2462MHz': 10, 'frequency2472MHz': 12, 'frequency2457MHz': 9, 'frequency2437MHz': 5.
                 inSrvScanGrpScan5GHzSelection 1.3.6.1.4.1.4329.15.3.11.12.1.7 bits read-only
bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel Bits: 'frequency5600MHz': 16, 'frequency5700MHz': 21, 'frequency4960MHz': 29, 'frequency4920MHz': 27, 'frequency4940MHz': 28, 'frequency5745MHz': 22, 'frequency5060MHz': 1, 'frequency5540MHz': 13, 'frequency5620MHz': 17, 'frequency5300MHz': 9, 'frequency5280MHz': 8, 'frequency5260MHz': 7, 'frequency5220MHz': 5, 'frequency5500MHz': 11, 'frequency5080MHz': 2, 'frequency5560MHz': 14, 'frequency5785MHz': 24, 'frequency5580MHz': 15, 'frequency5640MHz': 18, 'frequency5765MHz': 23, 'frequency5805MHz': 25, 'frequency5825MHz': 26, 'frequency5660MHz': 19, 'frequency5240MHz': 6, 'frequency5040MHz': 0, 'frequency5320MHz': 10, 'frequency5520MHz': 12, 'frequency5680MHz': 20, 'frequency5180MHz': 3, 'frequency4980MHz': 30, 'frequency5200MHz': 4.
                 inSrvScanGrpblockAdHocClientsPeriod 1.3.6.1.4.1.4329.15.3.11.12.1.8 integer32 read-only
Number of seconds removing network access to the clients that are in ad hoc mode.
                 inSrvScanGrpClassifySourceIF 1.3.6.1.4.1.4329.15.3.11.12.1.9 integer read-only
This variable allows to enable/disable classify sources of interference Enumeration: 'enable': 1, 'disable': 0.
                 inSrvScanGrpRowStatus 1.3.6.1.4.1.4329.15.3.11.12.1.10 rowstatus read-only
RowStatus field for creation/deletion or changing row status.
                 inSrvScanGrpDetectRogueAP 1.3.6.1.4.1.4329.15.3.11.12.1.11 integer read-only
This enables/disables rogue AP detection. Enumeration: 'enable': 1, 'disable': 0.
                 inSrvScanGrpListeningPort 1.3.6.1.4.1.4329.15.3.11.12.1.12 integer32 read-write
This OID represents the UDP port number that APs are to listen on while performing rogue AP detection. It has meaning only when inSrvScanGrpDetectRogueAP is enabled.
       outOfServiceScanGroupTable 1.3.6.1.4.1.4329.15.3.11.13 no-access
Out of service scan group is used to collect and classify various wireless identifiers that are discovered in the deployment environment. Legacy APs (26xx-based, 36xx-based) can participate in this subsystem if they are configured for out-of-service scanning. The new APs, based on 37xx architecture, can also participate in this subsystem.
             outOfServiceScanGroupEntry 1.3.6.1.4.1.4329.15.3.11.13.1 no-access
An entry in this table that defines attributes of a out-of-service scan group.
                 outOfSrvScanGrpName 1.3.6.1.4.1.4329.15.3.11.13.1.1 displaystring read-only
Human readable textual description identifying scan group.
                 outOfSrvScanGrpRadio 1.3.6.1.4.1.4329.15.3.11.13.1.2 integer read-only
Radio selection for the scan group. Selected radio will be used in sacn group. Enumeration: 'both': 3, 'radio1': 1, 'radio2': 2.
                 outOfSrvScanGrpChannelList 1.3.6.1.4.1.4329.15.3.11.13.1.3 integer read-only
Identifying the channel(s) which will be used for the defined scan group. Enumeration: 'currentChannel': 999, 'allChannel': 0.
                 outOfSrvScanGrpScanType 1.3.6.1.4.1.4329.15.3.11.13.1.4 integer read-only
This field allows to select the type of scanning, active/passive, this scan group will be executing. Enumeration: 'active': 0, 'passive': 1.
                 outOfSrvScanGrpChannelDwellTime 1.3.6.1.4.1.4329.15.3.11.13.1.5 integer read-only
Dwell time in mili-second for performing scanning.
                 outOfSrvScanGrpScanTimeInterval 1.3.6.1.4.1.4329.15.3.11.13.1.6 integer read-only
Time interval between two sucssive scanning performed for this scan group.
                 outOfSrvScanGrpSecurityScan 1.3.6.1.4.1.4329.15.3.11.13.1.7 integer read-only
This field allows to enable/disable security Scan. Enumeration: 'enable': 1, 'disable': 0.
                 outOfSrvScanGrpScanActivity 1.3.6.1.4.1.4329.15.3.11.13.1.8 integer read-only
Scaning can be started or stopped using this field. Enumeration: 'start': 1, 'stop': 0.
                 outOfSrvScanGrpScanRowStatus 1.3.6.1.4.1.4329.15.3.11.13.1.9 integer32 read-only
RowStatus field for the entry.
       scanGroupAPAssignmentTable 1.3.6.1.4.1.4329.15.3.11.14 no-access
The list of APs that have been assigned to a particular scan group, which could include in-service and out-of-service scanning groups.
             scanGroupAPAssignmentEntry 1.3.6.1.4.1.4329.15.3.11.14.1 no-access
An entry in this table defining an AP assignment to a group, identified by scanGroupProfileID.
                 scanGroupAPAssignApSerial 1.3.6.1.4.1.4329.15.3.11.14.1.1 octet string read-only
Unique string of characters, a 16-character long, serial number of an access point.
                 scanGroupAPAssignGroupName 1.3.6.1.4.1.4329.15.3.11.14.1.2 displaystring read-only
Human readable textual description identifying scan group.
                 scanGroupAPAssignName 1.3.6.1.4.1.4329.15.3.11.14.1.3 displaystring read-only
Access Point (AP) name associated to this scan group.
                 scanGroupAPAssignRadio1 1.3.6.1.4.1.4329.15.3.11.14.1.4 integer read-write
This field allows the radio #1 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile Enumeration: 'a': 4, 'bg': 3, 'off': 0, 'g': 2, 'bgnStrict': 35, 'j': 8, 'bgn': 19, 'n': 16, 'b': 1, 'anStrict': 36, 'gnStrict': 34, 'gn': 18, 'an': 20, 'nStrict': 32.
                 scanGroupAPAssignRadio2 1.3.6.1.4.1.4329.15.3.11.14.1.5 integer read-write
This field allows the radio #2 of the AP to be turned on/off. this field has meaning only the AP assigned to legacy (outOfScan) scan profile Enumeration: 'a': 4, 'bg': 3, 'off': 0, 'g': 2, 'bgnStrict': 35, 'j': 8, 'bgn': 19, 'n': 16, 'b': 1, 'anStrict': 36, 'gnStrict': 34, 'gn': 18, 'an': 20, 'nStrict': 32.
                 scanGroupAPAssignInactiveAP 1.3.6.1.4.1.4329.15.3.11.14.1.6 integer read-write
This field allows to set the AP as active/inactive in scanning activities. Enumeration: 'active': 1, 'inactive': 0.
                 scanGroupAPAssignAllowScanning 1.3.6.1.4.1.4329.15.3.11.14.1.7 integer read-write
Setting scanning to active/inactive using this AP. Enumeration: 'notAllow': 0, 'allow': 1.
                 scanGroupAPAssignAllowSpectrumAnalysis 1.3.6.1.4.1.4329.15.3.11.14.1.8 integer read-write
Setting spectrum analysis to active/inactive using this AP. Enumeration: 'notAllow': 0, 'allow': 1.
                 scanGroupAPAssignControllerIPAddress 1.3.6.1.4.1.4329.15.3.11.14.1.9 ipaddress read-write
The IP address of the controller to which the AP is connected currently.
                 scanGroupAPAssignFordwardingService 1.3.6.1.4.1.4329.15.3.11.14.1.10 bits read-only
This OID lists the types of forwarding services that each Guardian is assigned to. A Guardian will revert to providing these services when it is removed from the Guardian role. The meanings of the individual flags are: bit 0: Set if this AP is a member of a site. bit 1: Set if this AP is assigned to a load group. bit 2: Set if this AP is assigned to at least one WLAN service. This OID is only relevant to APs in the Guardian role. Bits: 'assignedToSite': 0, 'assignedToWlanService': 2, 'assignedToLoadGroup': 1.
       scanAPTable 1.3.6.1.4.1.4329.15.3.11.15 no-access
Table of sacn APs on each collector. This table can be viewed only in v3 mode when the mitigator analys engine is enabled.
             scanAPEntry 1.3.6.1.4.1.4329.15.3.11.15.1 no-access
An entry in this table identifying one access point.
                 scanAPControllerIPAddress 1.3.6.1.4.1.4329.15.3.11.15.1.1 ipaddress read-only
IP address of the controller on which the scanning executed.
                 scanAPSerialNumber 1.3.6.1.4.1.4329.15.3.11.15.1.2 octet string read-only
Serial number of the access point, 16-character human readable text, that is assigned to this group.
                 scanAPAcessPointName 1.3.6.1.4.1.4329.15.3.11.15.1.3 displaystring read-only
Name of the access point belonging to this group.
                 scanAPRowStatus 1.3.6.1.4.1.4329.15.3.11.15.1.4 rowstatus read-only
Row status for the entry.
                 scanAPProfileName 1.3.6.1.4.1.4329.15.3.11.15.1.5 displaystring read-only
Name of the scan profile to which this access point is assigned.
                 scanAPProfileType 1.3.6.1.4.1.4329.15.3.11.15.1.6 integer read-only
inServiceScan(1): access point is performed In service Scan. guardianScan(2): access point is performed Guardian Scan. outOfServiceScan(3): access point is performed out of service Scan(Legacy Scan). Enumeration: 'inServiceScan': 1, 'guardianScan': 2, 'outOfServiceScan': 3.
       friendlyAPTable 1.3.6.1.4.1.4329.15.3.11.16 no-access
List of Access Points that have been categorized as not being any threat to the wireless network that is managed by EWC. This table can be viewed only in v3 mode when the mitigator analys engine is enabled.
             friendlyAPEntry 1.3.6.1.4.1.4329.15.3.11.16.1 no-access
An entry in this table identifying an access points and some of its attributes.
                 friendlyAPMacAddress 1.3.6.1.4.1.4329.15.3.11.16.1.1 macaddress read-write
Ethernet MAC address of the access point.
                 friendlyAPSSID 1.3.6.1.4.1.4329.15.3.11.16.1.2 displaystring read-write
SSID broadcasted by the access point.
                 friendlyAPDescription 1.3.6.1.4.1.4329.15.3.11.16.1.3 displaystring read-write
Textual description that is used to identify the access point.
                 friendlyAPManufacturer 1.3.6.1.4.1.4329.15.3.11.16.1.4 displaystring read-only
Textual description identifying the access point manufacturer.
       uncategorizedAPTable 1.3.6.1.4.1.4329.15.3.11.17 no-access
List of APs that have not been categorized either as friendly, threat or authorized.
             uncategorizedAPEntry 1.3.6.1.4.1.4329.15.3.11.17.1 no-access
An entry about an AP in this table.
                 uncategorizedAPMAC 1.3.6.1.4.1.4329.15.3.11.17.1.1 macaddress no-access
MAC address of access point.
                 uncategorizedAPDescption 1.3.6.1.4.1.4329.15.3.11.17.1.2 displaystring read-only
Textual description of access point.
                 uncategorizedAPManufacturer 1.3.6.1.4.1.4329.15.3.11.17.1.3 displaystring read-only
Access point manufacturer.
                 uncategorizedAPClassify 1.3.6.1.4.1.4329.15.3.11.17.1.4 integer read-write
By setting this field, access point can be reclassified and moved to different group. Enumeration: 'classifyAsFriendlyAP': 2, 'noAction': 0, 'clasifyAsThreatForReport': 3, 'clasifyAsExternalHoneypotThreat': 5, 'clasifyAsInternalHoneypotThreat': 4, 'clasifyAsAuthorized': 1.
                 uncategorizedAPSSID 1.3.6.1.4.1.4329.15.3.11.17.1.5 displaystring read-only
SSID broadcasted by the access point.
       authorizedAPTable 1.3.6.1.4.1.4329.15.3.11.18 no-access
List of authorized access point.
             authorizedAPEntry 1.3.6.1.4.1.4329.15.3.11.18.1 no-access
An entry in this table describing an authorized AP.
                 authorizedAPMAC 1.3.6.1.4.1.4329.15.3.11.18.1.1 macaddress no-access
MAC address of access point.
                 authorizedAPDescription 1.3.6.1.4.1.4329.15.3.11.18.1.2 displaystring read-only
Discription of the access point.
                 authorizedAPManufacturer 1.3.6.1.4.1.4329.15.3.11.18.1.3 displaystring read-only
Access point's manufacturer. This field is cannot be set and it is deduced by MAC addressed.
                 authorizedAPClassify 1.3.6.1.4.1.4329.15.3.11.18.1.4 integer read-only
By setting this field, access point can be reclassified and moved to different group. Enumeration: 'classifyAsFriendlyAP': 1, 'noAction': 0.
                 authorizedAPRowStatus 1.3.6.1.4.1.4329.15.3.11.18.1.5 rowstatus read-only
Action permitted are 'delete/add' row.
       prohibitedAPTable 1.3.6.1.4.1.4329.15.3.11.19 no-access
List of prohibited access points.
             prohibitedAPEntry 1.3.6.1.4.1.4329.15.3.11.19.1 no-access
An entry in this table describing an access point.
                 prohibitedAPMAC 1.3.6.1.4.1.4329.15.3.11.19.1.1 macaddress no-access
MAC address of access point.
                 prohibitedAPCategory 1.3.6.1.4.1.4329.15.3.11.19.1.2 integer read-only
The category the access point in this row belongs to. Enumeration: 'perauthorized': 65533, 'reportPresenceOnly': 65529, 'externalHoneyPot': 65530, 'authorized': 65534, 'internalHoneyPot': 65531, 'notAvailable': 0, 'friendly': 65532.
                 prohibitedAPDescription 1.3.6.1.4.1.4329.15.3.11.19.1.3 displaystring read-only
Description of the access point.
                 prohibitedAPManufacturer 1.3.6.1.4.1.4329.15.3.11.19.1.4 displaystring read-only
Access point's manufacturer. This field is cannot be set and it is deduced by MAC addressed.
                 prohibitedAPClassify 1.3.6.1.4.1.4329.15.3.11.19.1.5 integer read-only
By setting this field, access point can be reclassified and moved to different group. Enumeration: 'classifyAsFriendlyAP': 1, 'noAction': 2.
                 prohibitedAPRowStatus 1.3.6.1.4.1.4329.15.3.11.19.1.6 rowstatus read-only
Action permitted are 'delete/add' row.
       dedicatedScanGroupTable 1.3.6.1.4.1.4329.15.3.11.20 no-access
dedicated scan group enables the subsystem full time scan for threats based on 37xx-based APs. The threats are discovered and identified in the deployment environment and then classified for further actions.
             dedicatedScanGroupEntry 1.3.6.1.4.1.4329.15.3.11.20.1 no-access
An entry in this table that defines attributes of a dedicated scan group.
                 dedicatedScanGrpName 1.3.6.1.4.1.4329.15.3.11.20.1.1 displaystring read-only
Textual description identifying the scan group.
                 dedicatedScanGrpSecurityThreats 1.3.6.1.4.1.4329.15.3.11.20.1.2 integer read-only
Enable/disable security engine to scan for threats. Enumeration: 'enable': 1, 'disable': 0.
                 dedicatedScanGrpMaxConcurrentAttacksPerAP 1.3.6.1.4.1.4329.15.3.11.20.1.3 integer32 read-only
Max number of concurrent attacks per AP
                 dedicatedScanGrpCounterMeasures 1.3.6.1.4.1.4329.15.3.11.20.1.4 bits read-only
bit 0: Setting this bit prevents authorized stations from roaming to external honeypot APs. bit 1: Setting this bit prevents authorized stations from roaming to friendly APs. bit 2: Setting this bit prevents any station from using an internal honeypot AP. bit 3: Setting this bit prevents any station from using a spoofed AP. bit 4: Setting this bit drops frames in a controlled fashion during a flood attack. bit 5: Setting this bit removes network access from clients originating DoS attacks. bit 6: Setting this bit prevents any station from using an ad hoc mode device. bit 7: Setting this bit prevents any station from using a rogue AP. Bits: 'spoofedAPs': 3, 'dropFloodAttack': 4, 'removeDosAttack': 5, 'internalHoneypotAPs': 2, 'roamingToFriendlyAPs': 1, 'externalHoneypotAPs': 0, 'rogueAP': 7, 'adHocModeDevice': 6.
                 dedicatedScanGrpScan2400MHzFreq 1.3.6.1.4.1.4329.15.3.11.20.1.5 bits read-only
bit 0: by setting this bit scanning is performed on 2412 MHz frequency channel bit 1: by setting this bit scanning is performed on 2417 MHz frequency channel bit 2: by setting this bit scanning is performed on 2422 MHz frequency channel bit 3: by setting this bit scanning is performed on 2427 MHz frequency channel bit 4: by setting this bit scanning is performed on 2432 MHz frequency channel bit 5: by setting this bit scanning is performed on 2437 MHz frequency channel bit 6: by setting this bit scanning is performed on 2442 MHz frequency channel bit 7: by setting this bit scanning is performed on 2447 MHz frequency channel bit 8: by setting this bit scanning is performed on 2452 MHz frequency channel bit 9: by setting this bit scanning is performed on 2457 MHz frequency channel bit 10: by setting this bit scanning is performed on 2462 MHz frequency channel bit 11: by setting this bit scanning is performed on 2467 MHz frequency channel bit 12: by setting this bit scanning is performed on 2472 MHz frequency channel bit 13: by setting this bit scanning is performed on 2484 MHz frequency channel Bits: 'frequency2417MHz': 1, 'frequency2452MHz': 8, 'frequency2427MHz': 3, 'frequency2422MHz': 2, 'frequency2412MHz': 0, 'frequency2432MHz': 4, 'frequency2442MHz': 6, 'frequency2467MHz': 11, 'frequency2484MHz': 13, 'frequency2447MHz': 7, 'frequency2462MHz': 10, 'frequency2472MHz': 12, 'frequency2457MHz': 9, 'frequency2437MHz': 5.
                 dedicatedScanGrpScan5GHzFreq 1.3.6.1.4.1.4329.15.3.11.20.1.6 bits read-only
bit 0: by setting this bit scanning is performed on 5040 MHz frequency channel bit 1: by setting this bit scanning is performed on 5060 MHz frequency channel bit 2: by setting this bit scanning is performed on 5080 MHz frequency channel bit 3: by setting this bit scanning is performed on 5180 MHz frequency channel bit 4: by setting this bit scanning is performed on 5200 MHz frequency channel bit 5: by setting this bit scanning is performed on 5220 MHz frequency channel bit 6: by setting this bit scanning is performed on 5240 MHz frequency channel bit 7: by setting this bit scanning is performed on 5260 MHz frequency channel bit 8: by setting this bit scanning is performed on 5280 MHz frequency channel bit 9: by setting this bit scanning is performed on 5300 MHz frequency channel bit 10: by setting this bit scanning is performed on 5320 MHz frequency channel bit 11: by setting this bit scanning is performed on 5500 MHz frequency channel bit 12: by setting this bit scanning is performed on 5520 MHz frequency channel bit 13: by setting this bit scanning is performed on 5540 MHz frequency channel bit 14: by setting this bit scanning is performed on 5560 MHz frequency channel bit 15: by setting this bit scanning is performed on 5580 MHz frequency channel bit 16: by setting this bit scanning is performed on 5600 MHz frequency channel bit 17: by setting this bit scanning is performed on 5620 MHz frequency channel bit 18: by setting this bit scanning is performed on 5640 MHz frequency channel bit 19: by setting this bit scanning is performed on 5660 MHz frequency channel bit 20: by setting this bit scanning is performed on 5680 MHz frequency channel bit 21: by setting this bit scanning is performed on 5700 MHz frequency channel bit 22: by setting this bit scanning is performed on 5745 MHz frequency channel bit 23: by setting this bit scanning is performed on 5765 MHz frequency channel bit 24: by setting this bit scanning is performed on 5785 MHz frequency channel bit 25: by setting this bit scanning is performed on 5805 MHz frequency channel bit 26: by setting this bit scanning is performed on 5825 MHz frequency channel bit 27: by setting this bit scanning is performed on 4920 MHz frequency channel bit 28: by setting this bit scanning is performed on 4940 MHz frequency channel bit 29: by setting this bit scanning is performed on 4960 MHz frequency channel bit 30: by setting this bit scanning is performed on 4980 MHz frequency channel Bits: 'frequency5600MHz': 16, 'frequency5700MHz': 21, 'frequency4960MHz': 29, 'frequency4920MHz': 27, 'frequency4940MHz': 28, 'frequency5745MHz': 22, 'frequency5060MHz': 1, 'frequency5540MHz': 13, 'frequency5620MHz': 17, 'frequency5300MHz': 9, 'frequency5280MHz': 8, 'frequency5260MHz': 7, 'frequency5220MHz': 5, 'frequency5500MHz': 11, 'frequency5080MHz': 2, 'frequency5560MHz': 14, 'frequency5785MHz': 24, 'frequency5580MHz': 15, 'frequency5640MHz': 18, 'frequency5765MHz': 23, 'frequency5805MHz': 25, 'frequency5825MHz': 26, 'frequency5660MHz': 19, 'frequency5240MHz': 6, 'frequency5040MHz': 0, 'frequency5320MHz': 10, 'frequency5520MHz': 12, 'frequency5680MHz': 20, 'frequency5180MHz': 3, 'frequency4980MHz': 30, 'frequency5200MHz': 4.
                 dedicatedScanGrpBlockAdHocPeriod 1.3.6.1.4.1.4329.15.3.11.20.1.7 integer32 read-only
Number of seconds removing network access to the clients that are in ad hoc mode.
                 dedicatedScanGrpClassifySourceIF 1.3.6.1.4.1.4329.15.3.11.20.1.8 integer read-only
This variable allows to enable/disable classify sources of interference Enumeration: 'enable': 1, 'disable': 0.
                 dedicatedScanGrpRowStatus 1.3.6.1.4.1.4329.15.3.11.20.1.9 rowstatus read-only
RowStatus field for creation/deletion or changing row status.
                 dedicatedScanGrpDetectRogueAP 1.3.6.1.4.1.4329.15.3.11.20.1.10 integer read-only
This enables/disables rogue AP detection. Enumeration: 'enable': 1, 'disable': 0.
                 dedicatedScanGrpListeningPort 1.3.6.1.4.1.4329.15.3.11.20.1.11 integer32 read-only
This variable has meaning only when dedicatedScanGrpDetectRogueAP is enabled. The port number is the port for listening for rogue AP detection.
       widsWipsReport 1.3.6.1.4.1.4329.15.3.11.30
             activeThreatTable 1.3.6.1.4.1.4329.15.3.11.30.1 no-access
List of active threats that have been discovered to this point of time.
                 activeThreatEntry 1.3.6.1.4.1.4329.15.3.11.30.1.1 no-access
An entry in this table describing an idividual threat charactersitics and attributes.
                     activeThreatIndex 1.3.6.1.4.1.4329.15.3.11.30.1.1.1 unsigned32 no-access
Internally generated number without any significat meaning except used as indexing in this table.
                     activeThreatCategory 1.3.6.1.4.1.4329.15.3.11.30.1.1.2 displaystring read-only
Textual description describing the type of the threat.
                     activeThreatDeviceMAC 1.3.6.1.4.1.4329.15.3.11.30.1.1.3 macaddress read-only
MAC address of the device that the threat appears to be originated.
                     activeThreatDateTime 1.3.6.1.4.1.4329.15.3.11.30.1.1.4 displaystring read-only
Date and time the threat was discovered.
                     activeThreatCounterMeasure 1.3.6.1.4.1.4329.15.3.11.30.1.1.5 integer read-only
Counter measure has been taken to tackle the threat. Enumeration: 'noCounterMeasure': 0, 'rateLimit': 1, 'blacklisted': 8, 'preventUse': 2, 'preventRoaming': 4.
                     activeThreatAPName 1.3.6.1.4.1.4329.15.3.11.30.1.1.6 displaystring read-only
Name of the access point.
                     activeThreatRSS 1.3.6.1.4.1.4329.15.3.11.30.1.1.7 displaystring read-only
Signal strength of the device considered to be a threat.
                     activeThreatExtraDetails 1.3.6.1.4.1.4329.15.3.11.30.1.1.8 displaystring read-only
Extra comments related to the threat.
                     activeThreatThreat 1.3.6.1.4.1.4329.15.3.11.30.1.1.9 displaystring read-only
Textual description of the threat.
             countermeasureAPTable 1.3.6.1.4.1.4329.15.3.11.30.2 no-access
List of APs engaged in countermeasure activities to thwart coming threats.
                 countermeasureAPEntry 1.3.6.1.4.1.4329.15.3.11.30.2.1 no-access
An entry in this table identifying an AP engaged in countermeasure activities.
                     countermeasureAPThreatIndex 1.3.6.1.4.1.4329.15.3.11.30.2.1.1 unsigned32 no-access
Internally generated index of the access point taking part in countermeasure.
                     countermeasureAPSerial 1.3.6.1.4.1.4329.15.3.11.30.2.1.2 displaystring read-only
Serial number of the access point taking part in countermeasure.
                     countermeasureAPName 1.3.6.1.4.1.4329.15.3.11.30.2.1.3 displaystring read-only
Name of the access point taking part in countermeasure.
                     countermeasureAPThreatCategory 1.3.6.1.4.1.4329.15.3.11.30.2.1.4 displaystring read-only
Textual description of the threat category that countermeasure action is aimed at.
                     countermeasureAPCountermeasure 1.3.6.1.4.1.4329.15.3.11.30.2.1.5 displaystring read-only
Countermeasure has been taken to thwart the threat.
                     countermeasureAPTime 1.3.6.1.4.1.4329.15.3.11.30.2.1.6 displaystring read-only
The time that the countermeasure has started.
             blacklistedClientTable 1.3.6.1.4.1.4329.15.3.11.30.3 no-access
List of clients that have been blacklisted due to preceived threats they may pose to the safe functioning of the operating network.
                 blacklistedClientEntry 1.3.6.1.4.1.4329.15.3.11.30.3.1 no-access
An entry in this table pertaining information about the MU that has been blacklisted.
                     blacklistedClientMAC 1.3.6.1.4.1.4329.15.3.11.30.3.1.1 macaddress read-only
MAC address of the client.
                     blacklistedClientStatTime 1.3.6.1.4.1.4329.15.3.11.30.3.1.2 displaystring read-only
The time blacklisting started.
                     blacklistedClientEndTime 1.3.6.1.4.1.4329.15.3.11.30.3.1.3 displaystring read-only
The time blacklisting ends.
                     blacklistedClientReason 1.3.6.1.4.1.4329.15.3.11.30.3.1.4 displaystring read-only
Reason for blacklisting the client.
             threatSummaryTable 1.3.6.1.4.1.4329.15.3.11.30.4 no-access
Summary of all threats that have been detected in the network by wireless controller system.
                 threatSummaryEntry 1.3.6.1.4.1.4329.15.3.11.30.4.1 no-access
An entry summarizing statistics about a category of a threat.
                     threatSummaryIndex 1.3.6.1.4.1.4329.15.3.11.30.4.1.1 unsigned32 no-access
Internally generated index.
                     threatSummaryCategory 1.3.6.1.4.1.4329.15.3.11.30.4.1.2 displaystring read-only
Textul description identifying the category of a threat.
                     threatSummaryActiveThreat 1.3.6.1.4.1.4329.15.3.11.30.4.1.3 unsigned32 read-only
Counts of threats that are currently active.
                     threatSummaryHistoricalCounts 1.3.6.1.4.1.4329.15.3.11.30.4.1.4 unsigned32 read-only
Historical counts of such threat that were detected in the past by the wireless controller system.
 apNotifications 1.3.6.1.4.1.4329.15.3.19
       apEventId 1.3.6.1.4.1.4329.15.3.19.1 integer read-write
Identifies event associated with AP or AP tunnel: apPollTimeout - an event triggered when the AP disconnects from the controller. apRegister - an event triggered when the AP connects to the controller. Enumeration: 'apPollTimeout': 1, 'apRegister': 2.
       apEventDescription 1.3.6.1.4.1.4329.15.3.19.2 octet string read-only
Contains the description of the most recently triggered event.
       apEventAPSerialNumber 1.3.6.1.4.1.4329.15.3.19.3 octet string read-only
16-character serial number of the AP.
       apTunnelAlarm 1.3.6.1.4.1.4329.15.3.19.4
alarm associated with AP and AP interface.
 stationSessionNotifications 1.3.6.1.4.1.4329.15.3.20
       stationEventType 1.3.6.1.4.1.4329.15.3.20.1 integer read-only
station event type include: registration(0): MU registration. deRegistration(1): MU de-registration. stateChange(2): MU state changed. registrationFailed(3): MU registration failure. roam(4): MU roam. mbaTimeout(5): MU MAC-Based-Authentication time out. mbaAccepted(6): MU MAC-Based-Authentication accepted. mbaRejected(7): MU MAC-Based-Authentication rejected. authorizationChanged(8): MU authorization changed. authentication(9): MU authentication. authenticationFailed(10): MU authentication failure. locationUpdate(11): MU location updated. areaChange(12): MU roamed to other area. Enumeration: 'stateChange': 2, 'authenticationFailed': 10, 'areaChange': 12, 'registration': 0, 'locationUpdate': 11, 'mbaAccepted': 6, 'authentication': 9, 'registrationFailed': 3, 'mbaRejected': 7, 'mbaTimeout': 5, 'roam': 4, 'authorizationChanged': 8, 'deRegistration': 1.
       stationMacAddress 1.3.6.1.4.1.4329.15.3.20.2 macaddress read-only
MAC address of the station that is the subject of this event report.
       stationIPAddress 1.3.6.1.4.1.4329.15.3.20.3 ipaddress read-only
IP address of the station that is the subject of this event report.
       stationAPName 1.3.6.1.4.1.4329.15.3.20.4 displaystring read-only
name of the AP which station associated with
       stationAPSSID 1.3.6.1.4.1.4329.15.3.20.5 displaystring read-only
SSID broadcasted by the access point which station connected to
       stationDetailEvent 1.3.6.1.4.1.4329.15.3.20.6 displaystring read-only
detail description of the station event
       stationRoamedAPName 1.3.6.1.4.1.4329.15.3.20.7 displaystring read-only
name of the access point which station roamed from
       stationName 1.3.6.1.4.1.4329.15.3.20.8 displaystring read-only
name of station
       stationBSSID 1.3.6.1.4.1.4329.15.3.20.9 displaystring read-only
the Mac address of the radio which station connect to
       stationEventTimeStamp 1.3.6.1.4.1.4329.15.3.20.10 timeticks read-only
The duration in hundredths of a second from the network agent start time to the time of generation of the station event.
       stationEventAlarm 1.3.6.1.4.1.4329.15.3.20.11
A trap describing a significant event that happened to a station during a session on the network. A controller can sees hundreds or even thousands of these events every second.
       stationIPv6Address1 1.3.6.1.4.1.4329.15.3.20.12 ipv6address read-only
One of the IPv6 addresses of the station that is the subject of this event report.
       stationIPv6Address2 1.3.6.1.4.1.4329.15.3.20.13 ipv6address read-only
One of the IPv6 addresses of the station that is the subject of this event report.
       stationIPv6Address3 1.3.6.1.4.1.4329.15.3.20.14 ipv6address read-only
One of the IPv6 addresses of the station that is the subject of this event report.
 hiPathWirelessHWCConformance 1.3.6.1.4.1.4329.15.3.30
       hiPathWirelessHWCModule 1.3.6.1.4.1.4329.15.3.30.1
Conformance definition for the EWC MIB.
       hiPathWirelessHWCGroup 1.3.6.1.4.1.4329.15.3.30.2
Conformance groups.
       hiPathWirelessHWCAlarms 1.3.6.1.4.1.4329.15.3.30.3
Conformance information for the alarm groups.
       hiPathWirelessHWCObsolete 1.3.6.1.4.1.4329.15.3.30.4
List of object that EWC does not anymore support.
       wirelessEWCGroups 1.3.6.1.4.1.4329.15.3.30.5
           physicalPortsGroup 1.3.6.1.4.1.4329.15.3.30.5.1
Physical ports and their attributes.
           phyDHCPRangeGroup 1.3.6.1.4.1.4329.15.3.30.5.2
DHCP objects and attributes associated to physical ports.
           layerTwoPortGroup 1.3.6.1.4.1.4329.15.3.30.5.3
Collection of layer two ports objects.
           muGroup 1.3.6.1.4.1.4329.15.3.30.5.4
MU attributes associated to EWC.
           apStatsGroup 1.3.6.1.4.1.4329.15.3.30.5.5
Collection of objects and attributes related to AP statistics.
           muACLGroup 1.3.6.1.4.1.4329.15.3.30.5.6
List of objects for creation of blacklist/whitelist.
           siteGroup 1.3.6.1.4.1.4329.15.3.30.5.7
A collection of objects providing Site creation and its attributes.
           sitePolicyGroup 1.3.6.1.4.1.4329.15.3.30.5.8
Objects defining the association of policies to sites.
           siteCosGroup 1.3.6.1.4.1.4329.15.3.30.5.9
Objects defining the association of policies to sites.
           siteAPGroup 1.3.6.1.4.1.4329.15.3.30.5.10
Objects defining the association of policies to sites.
           siteWlanGroup 1.3.6.1.4.1.4329.15.3.30.5.11
Objects defining the association of policies to sites.
           apGroup 1.3.6.1.4.1.4329.15.3.30.5.12
List of objects defining configuration attributes of an AP.
           wlanGroup 1.3.6.1.4.1.4329.15.3.30.5.13
List of objects defining configuration attributes of a WLAN.
           wlanStatsGroup 1.3.6.1.4.1.4329.15.3.30.5.14
List of objects defining configuration attributes of a WLAN.
           topologyGroup 1.3.6.1.4.1.4329.15.3.30.5.15
List of objects defining configuration attributes of a WLAN.
           topologyStatGroup 1.3.6.1.4.1.4329.15.3.30.5.16
List of objects for defining topology statics.
           loadGroup 1.3.6.1.4.1.4329.15.3.30.5.17
A collection of objects providing Load Group creation and its attributes.
           widsWipsObjectsGroup 1.3.6.1.4.1.4329.15.3.30.5.18
Objects defining the state of WIDS-WIPS for the controller.
           widsWipsEngineGroup 1.3.6.1.4.1.4329.15.3.30.5.19
Set of objects defining attributes of a WIDS-WIPS engine.
           outOfServiceScanGroup 1.3.6.1.4.1.4329.15.3.30.5.20
List of objects for defining out-of-service scan group.
           inServiceScanGroup 1.3.6.1.4.1.4329.15.3.30.5.21
List of objects for defining in-service scan group.
           scanGroupAPAssignmentGroup 1.3.6.1.4.1.4329.15.3.30.5.22
List of objects for assignment of AP to scan group.
           scanAPGroup 1.3.6.1.4.1.4329.15.3.30.5.23
List of objects for defining AP scan groups in EWC.
           friendlyAPGroup 1.3.6.1.4.1.4329.15.3.30.5.24
List of objects defining friendly APs identified during scanning time.
           wlanSecurityReportGroup 1.3.6.1.4.1.4329.15.3.30.5.25
Set of objects defining attributes of security group report.
           apAntennaGroup 1.3.6.1.4.1.4329.15.3.30.5.26
A collection of objects defining an antenna attributes for an AP.
           muAccessListGroup 1.3.6.1.4.1.4329.15.3.30.5.27
List of objects for creation of MU access list to block MU access, case of black list, or allow access, case of white list to wireless controller resources.
           activeThreatGroup 1.3.6.1.4.1.4329.15.3.30.5.28
List of objects defining a discovered security threat.
           countermeasureAPGroup 1.3.6.1.4.1.4329.15.3.30.5.29
List of objects defining APs taking part in countermeasure activities to thwart incoming threats.
           blaclistedClientGroup 1.3.6.1.4.1.4329.15.3.30.5.30
List of objects identifying blacklisted clients.
           threatSummaryGroup 1.3.6.1.4.1.4329.15.3.30.5.31
List of objects defining attributes of known discovered threat.
           licensingInformationGroup 1.3.6.1.4.1.4329.15.3.30.5.32
List of objects providing licensing information for the controller system.
           stationsByProtocolGroup 1.3.6.1.4.1.4329.15.3.30.5.33
List of objects for aggregated MUs on a specific wireless channel.
           apByChannelGroup 1.3.6.1.4.1.4329.15.3.30.5.34
List of objects for aggregated access points on a wireless channel.
           uncategorizedAPGroup 1.3.6.1.4.1.4329.15.3.30.5.35
Objects defining uncategorized access points discovered by Radar application.
           authorizedAPGroup 1.3.6.1.4.1.4329.15.3.30.5.36
Objects defining authorized access points discovered by Radar application.
           prohibitedAPGroup 1.3.6.1.4.1.4329.15.3.30.5.37
Objects defining prohibited access points discovered by Radar application.
           dedicatedScanGroup 1.3.6.1.4.1.4329.15.3.30.5.38
List of objects for defining dedicated scan group.
           apRadioAntennaGroup 1.3.6.1.4.1.4329.15.3.30.5.39
A collection of objects defining an antenna attributes for an AP.
           radiusFastFailoverEventsGroup 1.3.6.1.4.1.4329.15.3.30.5.40
List of objects for defining radius FastFailoverEvents.
           dhcpRelayListenersGroup 1.3.6.1.4.1.4329.15.3.30.5.41
List of objects for defining dhcpRelayListeners.
           authenticationAdvancedGroup 1.3.6.1.4.1.4329.15.3.30.5.42
List of objects for defining authenticationAdvanced.
           radiusExtnsSettingGroup 1.3.6.1.4.1.4329.15.3.30.5.43
List of objects for defining radiusExtnsSetting.
 hiPathWirelessControllerMib 1.3.6.1.4.1.4329.15.5.2
The access controller MIB