HH3C-VBR-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-VBR-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, HH3C-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cVbr 1.3.6.1.4.1.25506.2.180
This MIB is used to manage port extenders (PEXs) over 802.1BR. This MIB is applicable to products that support PEXs.
         hh3cVbrSpecInfo 1.3.6.1.4.1.25506.2.180.1
             hh3cVbrGroupMinId 1.3.6.1.4.1.25506.2.180.1.1 integer32 read-only
Lowest PEX group ID that can be used to allocate ECIDs for ports on a PEX.
             hh3cVbrGroupMaxId 1.3.6.1.4.1.25506.2.180.1.2 integer32 read-only
Highest PEX group ID that can be used to allocate ECID for ports on a PEX.
             hh3cVbrMinAssociateId 1.3.6.1.4.1.25506.2.180.1.3 integer32 read-only
Lowest ID that can be assigned to a PEX.
             hh3cVbrMaxAssociateId 1.3.6.1.4.1.25506.2.180.1.4 integer32 read-only
Highest ID that can be assigned to a PEX.
         hh3cVbrTable 1.3.6.1.4.1.25506.2.180.2
             hh3cVbrGroupTable 1.3.6.1.4.1.25506.2.180.2.1 no-access
This table contains objects used to configure PEX groups.
                 hh3cVbrGroupEntry 1.3.6.1.4.1.25506.2.180.2.1.1 no-access
Information about a PEX group.
                     hh3cVbrGroupId 1.3.6.1.4.1.25506.2.180.2.1.1.1 integer32 read-only
ID that can be used to uniquely identify a PEX group. The value range is hh3cVbrGroupMinId to hh3cVbrGroupMaxId.
                     hh3cVbrGroupDescr 1.3.6.1.4.1.25506.2.180.2.1.1.2 displaystring read-only
Description for the PEX group. The default value is 'pex-group XXXX', where 'XXXX' is hh3cVbrGroupId. Writing a zero-length string to this object resets the value to the default.
                     hh3cVbrGroupRowStatus 1.3.6.1.4.1.25506.2.180.2.1.1.3 rowstatus read-only
The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned.
             hh3cVbrCasPortTable 1.3.6.1.4.1.25506.2.180.2.2 no-access
This table contains objects used to configure PEX cascade ports.
                 hh3cVbrCasPortEntry 1.3.6.1.4.1.25506.2.180.2.2.1 no-access
Information about a PEX cascade port.
                     hh3cVbrCasPortIndex 1.3.6.1.4.1.25506.2.180.2.2.1.1 integer32 no-access
Interface index of the cascade port for a PEX.
                     hh3cVbrCasPortAssociateId 1.3.6.1.4.1.25506.2.180.2.2.1.2 integer32 read-only
ID assigned to the PEX that is attached to the cascade port. The value range is hh3cVbrMinAssociateId to hh3cVbrMaxAssociateId. The value is 0xffff if the PEX is not assigned an ID. For a successful configuration, the ID must be unique among all PEXs in the IRF 3.1 system.
                     hh3cVbrCasPortGroupID 1.3.6.1.4.1.25506.2.180.2.2.1.3 integer32 read-only
PEX group ID assigned to the PEX that is attached to the cascade port. The value range is hh3cVbrGroupMinId to hh3cVbrGroupMaxId.
                     hh3cVbrPEXStatus 1.3.6.1.4.1.25506.2.180.2.2.1.4 integer read-only
Status of the PEX. If the value is offline, the PEX is absent or its configuration is incomplete. If the value is online, the PEX is operating correctly. Enumeration: 'offline': 1, 'online': 2.
                     hh3cVbrPEXTier 1.3.6.1.4.1.25506.2.180.2.2.1.5 integer32 read-only
Tier of the PEX. The value is 0xffff if the upper-tier device of the PEX is not online.
                     hh3cVbrPEXDeviceMac 1.3.6.1.4.1.25506.2.180.2.2.1.6 displaystring read-only
Device MAC address of the PEX.
                     hh3cVbrPEXSysname 1.3.6.1.4.1.25506.2.180.2.2.1.7 displaystring read-only
Device name of the PEX.
                     hh3cVbrPEXBoardType 1.3.6.1.4.1.25506.2.180.2.2.1.8 displaystring read-only
Device board type of the PEX.
                     hh3cVbrPEXParent 1.3.6.1.4.1.25506.2.180.2.2.1.9 integer32 read-only
Upper-tier device of the PEX. The value is 0xffff if the upper-tier device of the PEX is the parent fabric(CB). In other situations, the value equals to the associated ID of the upper-tier PEX.
                     hh3cVbrCasPortRowStatus 1.3.6.1.4.1.25506.2.180.2.2.1.10 rowstatus read-only
The control that allows creation and deletion of entries. Values include createAndGo, active, and destroy. If the row to be created or modified already exists, an error message is returned. If the row to be deleted does not exist, a success message is returned.
             hh3cVbrUpgradeTable 1.3.6.1.4.1.25506.2.180.2.3 no-access
This table contains objects used to upgrade PEX software images or patches.
                 hh3cVbrUpgradeEntry 1.3.6.1.4.1.25506.2.180.2.3.1 no-access
Upgrade software for PEXs, including upgrading PEX software images by using an IPE file and installing or uninstalling PEX patches by using a patch file. Each time only one of the upgrading operations can be performed. The IPE file or the patch file must be saved in the flash:/pex_images directory on the parent fabric.
                     hh3cVbrUpgradeAssociateId 1.3.6.1.4.1.25506.2.180.2.3.1.1 integer32 no-access
ID assigned to a PEX. The value range is hh3cVbrMinAssociateId to hh3cVbrMaxAssociateId. If the value is 0xffff,this object will upgrade software for all PEXs.
                     hh3cVbrUpgradeIPEFile 1.3.6.1.4.1.25506.2.180.2.3.1.2 displaystring read-write
The IPE file used to upgrade PEX software images. The file must be saved in the flash:/pex_images directory on the parent fabric.
                     hh3cVbrUpgradePatchFile 1.3.6.1.4.1.25506.2.180.2.3.1.3 displaystring read-write
The patch file used to install or uninstall PEX patches. The file must be saved in the flash:/pex_images directory on the parent fabric.
                     hh3cVbrUpgradePatchAction 1.3.6.1.4.1.25506.2.180.2.3.1.4 integer read-write
Action on patches in the patch file. The value active means to install the patches. The value deactive means to uninstall the patches. Enumeration: 'active': 1, 'inactive': 2.
                     hh3cVbrUpgradeStatus 1.3.6.1.4.1.25506.2.180.2.3.1.5 integer read-only
Result of the upgrading operation. Enumeration: 'failed': 5, 'downloading': 2, 'initial': 1, 'upgrading': 3, 'succeeded': 4.
                     hh3cVbrInitUpgradeStatus 1.3.6.1.4.1.25506.2.180.2.3.1.6 truthvalue read-write
If you want to initialize the upgrade status, set the value of this object to enable.
         hh3cVbrTraps 1.3.6.1.4.1.25506.2.180.3
             hh3cVbrTrapPrefix 1.3.6.1.4.1.25506.2.180.3.0
                 hh3cVbrPEXRemoveOrInsert 1.3.6.1.4.1.25506.2.180.3.0.1
An hh3cVbrPEXRemoveOrInsert notification is sent when a PEX is removed or inserted.