HH3C-NPV-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-NPV-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HH3C-VSAN-MIB, HH3C-FC-TC-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cNpv 1.3.6.1.4.1.25506.2.127.6
This MIB module is for the management of N_Port Virtualization or NPV within the framework of N_Port virtualization(NPV) architecture. N_Port virtualization reduces the number of Fibre Channel domain IDs in SANs(Storage Aera Network). Switches operating in the NPV mode do not join a fabric; rather, they pass traffic between NPV core switch links and end-devices, which eliminates the domain IDs for these edge switches. NPV core switch is a fibre channel edge switch connected to one or more NPV devices.
     hh3cNpvMibObjects 1.3.6.1.4.1.25506.2.127.6.1
         hh3cNpvConfiguration 1.3.6.1.4.1.25506.2.127.6.1.1
             hh3cNpvGlobalObjects 1.3.6.1.4.1.25506.2.127.6.1.1.1
                 hh3cNpvLoadbalanceVsan 1.3.6.1.4.1.25506.2.127.6.1.1.1.1 hh3cfcvsanindex read-write
Used to trigger a load-banlancing in the specified VSAN (Virtual Storage Area Network). When the hh3cNpvLoadbalanceVsan is set to a specific VSAN, a disruptive load-balancing process will be initiated in the VSAN so that all nodes in the VSAN will re-login to the core switch. This load-balancing process redistributes downlink traffic across all uplink interfaces for better load balancing, but it causes traffic interruption.
             hh3cNpvTrafficMapConfigTable 1.3.6.1.4.1.25506.2.127.6.1.1.2 no-access
A table containing information on the assignment of traffic map interfaces to an interface.
                 hh3cNpvTrafficMapConfigEntry 1.3.6.1.4.1.25506.2.127.6.1.1.2.1 no-access
An entry in the hh3cNpvTrafficMapConfigTable. This table contains entries for each of the interfaces which has been assigned a set of interfaces for traffic mapping in the VSAN. Traffic mapping is a technique used in NPV device to restrict the usage of external interface(s) for forwarding the traffic from server interface to the fibre channel fabric. If an interface comes up as a server interface and finds a corresponding entry in this table, then the switch software will assign a valid external interface from this list, if any. Once assigned, that assigned external interface will be used for forwarding the traffic from the server interface to the fibre channel fabric. If an interface comes up as a server interface and finds an entry in this table, but with no valid list of external interfaces, then the switch software keeps the server interface in operationally down state until at least one of the interface in the list becomes a valid external interface. If an interface comes up as a server interface and it can not find an entry in this table, then any of the available external interfaces can be assigned to that server interface. Entries in this table can be created or destroyed via hh3cNpvTrafficMapRowStatus object. Columnar objects can be modified when the corresponding hh3cNpvTrafficMapRowStatus is 'active'.
                     hh3cNpvTrafficMapExternalIfIndexList 1.3.6.1.4.1.25506.2.127.6.1.1.2.1.1 hh3cnpvifindexlist read-only
The list of external interfaces which the traffic needs to be mapped to. This object is a list of interfaces presented as an octet string of interface indices or ifindex-es. The list should contain at least one interface and at most all the interfaces in the switch up to 16384 interfaces. The 16384 interfaces max-limit is due to the size of this object. Specifying this object is mandatory for the creation of a row in hh3cNpvTrafficMapConfigTable.
                     hh3cNpvTrafficMapLastChange 1.3.6.1.4.1.25506.2.127.6.1.1.2.1.2 timestamp read-only
The value of sysUpTime at the time of the latest change to this traffic map entry. When there has not been any change to the traffic map entry, the value of this field will be that of the entry creation time.
                     hh3cNpvTrafficMapRowStatus 1.3.6.1.4.1.25506.2.127.6.1.1.2.1.3 rowstatus read-only
The status of this conceptual row. The row can be made 'active' only if value of corresponding instance of hh3cNpvTrafficMapExternalIfIndexList is provided.
             hh3cNpvServerIfTable 1.3.6.1.4.1.25506.2.127.6.1.1.3 no-access
This table contains, one entry for each server interface(FC-port configured in F-port mode) in this VSAN in the Fabric element. Each entry contains NPV related information like external interface assigned for the server interface in the VSAN.
                 hh3cNpvServerIfEntry 1.3.6.1.4.1.25506.2.127.6.1.1.3.1 no-access
An entry in the hh3cNpvServerIfTable, containing NPV related parameters established by a server interface indicated by ifIndex.
                     hh3cNpvExternalIfIndex 1.3.6.1.4.1.25506.2.127.6.1.1.3.1.1 interfaceindex read-only
This value of this object is the external interface assigned for the server interface associated with the server interface.