HH3C-MIRRORGROUP-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-MIRRORGROUP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, SNMPv2-TC, HH3C-OID-MIB

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cMirrGroup 1.3.6.1.4.1.25506.2.68
This MIB defines objects for managing mirror group.
       hh3cMGInfoObjects 1.3.6.1.4.1.25506.2.68.1
           hh3cMGObjects 1.3.6.1.4.1.25506.2.68.1.1
               hh3cMGTable 1.3.6.1.4.1.25506.2.68.1.1.1 no-access
A list of mirror group entries.
                   hh3cMGEntry 1.3.6.1.4.1.25506.2.68.1.1.1.1 no-access
A list of parameters that describe a mirror group to be created.
                       hh3cMGID 1.3.6.1.4.1.25506.2.68.1.1.1.1.1 integer32 no-access
An index that uniquely identifies an entry in the mirror group table.
                       hh3cMGType 1.3.6.1.4.1.25506.2.68.1.1.1.1.2 integer read-only
GroupType. Enumeration: 'local': 1, 'remoteSource': 2, 'remoteDestination': 3.
                       hh3cMGStatus 1.3.6.1.4.1.25506.2.68.1.1.1.1.3 integer read-only
The status of a mirror group. A mirror group will be inactive when it was created. The status of a mirror group can be changed automatically from inactive to active when appropriate conditions were met, also, it can be changed automatically from active to inactive when these conditions disappeared. Followings are conditions for a mirror group to become active: group type conditions ============================================================================ local mirroring-port, monitor-port remoteSource mirroring-port, remote-probe vlan, reflector-port(may not be supported by some products) remoteDestination monitor-port, remote-probe vlan Enumeration: 'active': 1, 'inactive': 2.
                       hh3cMGRowStatus 1.3.6.1.4.1.25506.2.68.1.1.1.1.4 rowstatus read-only
RowStatus
           hh3cMGMirrorIfObjects 1.3.6.1.4.1.25506.2.68.1.2
               hh3cMGMirrorIfTable 1.3.6.1.4.1.25506.2.68.1.2.1 no-access
A list of mirror group mirroring-port entries.
                   hh3cMGMirrorIfEntry 1.3.6.1.4.1.25506.2.68.1.2.1.1 no-access
A list of parameters that describe a mirroring-port to be added to a mirror group.
                       hh3cMGMirrorIfIndex 1.3.6.1.4.1.25506.2.68.1.2.1.1.1 integer32 no-access
IfIndex of mirror group mirroring-port.
                       hh3cMGMirrorDirection 1.3.6.1.4.1.25506.2.68.1.2.1.1.2 integer no-access
Mirror direction of mirroring-port. Once mirror direction was configured for a mirroring-port, it can not be changed unless the mirroring-port was removed from mirror group. If a mirror port is configured with two mirror directions 'outbound' and 'inbound', though it is functionally equal to 'both', it will be handled as two table items. If a mirror port is configured with mirror direction 'outbound' or 'inbound', or both of them, it will not be allowed to configure 'both', more details please refer to mirror group manual. Enumeration: 'inbound': 1, 'both': 3, 'outbound': 2.
                       hh3cMGMirrorRowStatus 1.3.6.1.4.1.25506.2.68.1.2.1.1.3 rowstatus read-only
RowStatus
           hh3cMGMonitorIfObjects 1.3.6.1.4.1.25506.2.68.1.3
               hh3cMGMonitorIfTable 1.3.6.1.4.1.25506.2.68.1.3.1 no-access
A list of mirror group monitor-port entries.
                   hh3cMGMonitorIfEntry 1.3.6.1.4.1.25506.2.68.1.3.1.1 no-access
A list of parameters that describe a monitor-port to be added to a mirror group.
                       hh3cMGMonitorIfIndex 1.3.6.1.4.1.25506.2.68.1.3.1.1.1 integer32 no-access
IfIndex of mirror group monitor-port.
                       hh3cMGMonitorRowStatus 1.3.6.1.4.1.25506.2.68.1.3.1.1.2 rowstatus read-only
RowStatus
           hh3cMGReflectorIfObjects 1.3.6.1.4.1.25506.2.68.1.4
               hh3cMGReflectorIfTable 1.3.6.1.4.1.25506.2.68.1.4.1 no-access
A list of mirror group reflector-port entries.
                   hh3cMGReflectorIfEntry 1.3.6.1.4.1.25506.2.68.1.4.1.1 no-access
A list of parameters that describe a reflector-port to be added to a mirror group.
                       hh3cMGReflectorIfIndex 1.3.6.1.4.1.25506.2.68.1.4.1.1.1 integer32 no-access
IfIndex of mirror group reflector-port.
                       hh3cMGReflectorRowStatus 1.3.6.1.4.1.25506.2.68.1.4.1.1.2 rowstatus read-only
RowStatus
           hh3cMGRprobeVlanObjects 1.3.6.1.4.1.25506.2.68.1.5
               hh3cMGRprobeVlanTable 1.3.6.1.4.1.25506.2.68.1.5.1 no-access
A list of mirror group remote-probe vlan entries.
                   hh3cMGRprobeVlanEntry 1.3.6.1.4.1.25506.2.68.1.5.1.1 no-access
A list of parameters that describe a remote-probe vlan to be added to a mirror group. Details about remote-probe vlan please refer to mirror group manual.
                       hh3cMGRprobeVlanID 1.3.6.1.4.1.25506.2.68.1.5.1.1.1 integer32 no-access
An index that uniquely identifies an entry in the remote-probe vlan table.
                       hh3cMGRprobeVlanRowStatus 1.3.6.1.4.1.25506.2.68.1.5.1.1.2 rowstatus read-only
RowStatus