HH3C-LswRSTP-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-LswRSTP-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HH3C-OID-MIB, BRIDGE-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cLswRstpMib 1.3.6.1.4.1.25506.8.35.6
     hh3cLswRstpMibObject 1.3.6.1.4.1.25506.8.35.6.1
         hh3cRstpEventsV2 1.3.6.1.4.1.25506.8.35.6.1.0
Definition point for RSTP notifications.
             hh3cRstpBpduGuarded 1.3.6.1.4.1.25506.8.35.6.1.0.1
The SNMP trap that is generated when an edged port of the BPDU-guard switch recevies BPDU packets.
             hh3cRstpRootGuarded 1.3.6.1.4.1.25506.8.35.6.1.0.2
The SNMP trap that is generated when a root-guard port receives a superior bpdu.
             hh3cRstpBridgeLostRootPrimary 1.3.6.1.4.1.25506.8.35.6.1.0.3
The SNMP trap that is generated when the bridge is no longer the root bridge of the spanning tree. Another switch with higher priority has already been the root bridge.
             hh3cRstpLoopGuarded 1.3.6.1.4.1.25506.8.35.6.1.0.4
The SNMP trap that is generated when a loop-guard port is aged out .
         hh3cdot1dStpStatus 1.3.6.1.4.1.25506.8.35.6.1.1 enabledstatus read-write
Bridge STP enabled/disabled state
         hh3cdot1dStpForceVersion 1.3.6.1.4.1.25506.8.35.6.1.2 integer read-write
Running mode of the bridge RSTP state machine Enumeration: 'stp': 0, 'rstp': 2.
         hh3cdot1dStpDiameter 1.3.6.1.4.1.25506.8.35.6.1.3 integer read-write
Permitted amount of bridges between any two ends on the network.
         hh3cdot1dStpRootBridgeAddress 1.3.6.1.4.1.25506.8.35.6.1.4 macaddress read-only
MAC address of the root bridge
         hh3cdot1dStpPortXTable 1.3.6.1.4.1.25506.8.35.6.1.5 no-access
RSTP extended information of the port
             hh3cdot1dStpPortXEntry 1.3.6.1.4.1.25506.8.35.6.1.5.1 no-access
RSTP extended information of the port
                 hh3cdot1dStpPortStatus 1.3.6.1.4.1.25506.8.35.6.1.5.1.1 enabledstatus read-write
RSTP status of the port
                 hh3cdot1dStpPortEdgeport 1.3.6.1.4.1.25506.8.35.6.1.5.1.2 truthvalue read-write
Whether the port can be an edge port
                 hh3cdot1dStpPortPointToPoint 1.3.6.1.4.1.25506.8.35.6.1.5.1.3 integer read-write
It is the administrative value indicates whether the port can be connected to a point-to-point link or not. If the value is 'auto', the operative value of a point-to-point link state is determined by device itself, and can be read from hh3cdot1dStpOperPortPointToPoint. Enumeration: 'forceFalse': 2, 'forceTrue': 1, 'auto': 3.
                 hh3cdot1dStpMcheck 1.3.6.1.4.1.25506.8.35.6.1.5.1.4 truthvalue read-write
Check if the port transfer state machine enters
                 hh3cdot1dStpTransLimit 1.3.6.1.4.1.25506.8.35.6.1.5.1.5 integer read-write
Packet transmission limit of the bridge in a duration of Hello Time.
                 hh3cdot1dStpRXStpBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.6 counter32 read-only
Number of STP BPDU received
                 hh3cdot1dStpTXStpBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.7 counter32 read-only
Number of STP BPDU transmitted
                 hh3cdot1dStpRXTCNBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.8 counter32 read-only
Number of TCN BPDU received
                 hh3cdot1dStpTXTCNBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.9 counter32 read-only
Number of TCN BPDU transmitted
                 hh3cdot1dStpRXRSTPBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.10 counter32 read-only
Number of RSTP BPDU received
                 hh3cdot1dStpTXRSTPBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.11 counter32 read-only
Number of RSTP BPDU transmitted
                 hh3cdot1dStpClearStatistics 1.3.6.1.4.1.25506.8.35.6.1.5.1.12 integer read-write
Clear RSTP statistics. Read operation not supported. Enumeration: 'clear': 1.
                 hh3cdot1dSetStpDefaultPortCost 1.3.6.1.4.1.25506.8.35.6.1.5.1.13 integer read-write
Set PathCost back to the default setting. Read operation not supported. Enumeration: 'enable': 1.
                 hh3cdot1dStpRootGuard 1.3.6.1.4.1.25506.8.35.6.1.5.1.14 enabledstatus read-write
If the port guard root bridge. Other bridge which want to be root can not become root through this port if enabled.
                 hh3cdot1dStpLoopGuard 1.3.6.1.4.1.25506.8.35.6.1.5.1.15 enabledstatus read-write
Loop guard function that keep a root port or an alternate port in discarding state while the information on the port is aged out.
                 hh3cdot1dStpPortBlockedReason 1.3.6.1.4.1.25506.8.35.6.1.5.1.16 integer read-only
Record the block reason of the port. notBlock (1) means that the port is not in block state,. blockForProtocol (2) means that the port is blocked by stp protocol to avoid loop. blockForRootGuard(3) means that the root guard flag of bridge is set and a better message received from the port,and the port is blocked. blockForBPDUGuard(4) means that the port has been configured as an edge port and receive a BPDU and thus blocked. blockForLoopGuard(5) means that the port is blocked for loopguarded. Enumeration: 'blockForProtocol': 2, 'blockForLoopGuard': 5, 'notBlock': 1, 'blockForRootGuard': 3, 'blockForBPDUGuard': 4.
                 hh3cdot1dStpRXTCBPDU 1.3.6.1.4.1.25506.8.35.6.1.5.1.17 counter32 read-only
The number of received TC BPDUs
                 hh3cdot1dStpPortSendingBPDUType 1.3.6.1.4.1.25506.8.35.6.1.5.1.18 integer read-only
Type of BPDU which the port is sending. Enumeration: 'stp': 0, 'rstp': 2.
                 hh3cdot1dStpOperPortPointToPoint 1.3.6.1.4.1.25506.8.35.6.1.5.1.19 integer read-only
This object indicates whether the port has connected to a point-to-point link or not. The administrative value should be read from hh3cdot1dStpPortPointToPoint. Enumeration: 'false': 2, 'true': 1.
         hh3cDot1dStpBpduGuard 1.3.6.1.4.1.25506.8.35.6.1.6 enabledstatus read-write
If BPDU guard enabled. The edge port will discard illegal BPDU when enabled
         hh3cDot1dStpRootType 1.3.6.1.4.1.25506.8.35.6.1.7 integer read-write
Root type of the bridge Enumeration: 'secondary': 3, 'primary': 2, 'normal': 1.
         hh3cDot1dTimeOutFactor 1.3.6.1.4.1.25506.8.35.6.1.8 integer read-write
Time Out Factor of the bridge.
         hh3cDot1dStpPathCostStandard 1.3.6.1.4.1.25506.8.35.6.1.9 integer read-write
Path Cost Standard of the bridge. Value 'dot1d-1998' is IEEE 802.1d standard in 1998, value 'dot1t' is IEEE 802.1t standard, and value 'legacy' is a private legacy standard. Enumeration: 'dot1d-1998': 1, 'dot1t': 2, 'legacy': 3.
         hh3cdot1dStpIgnoredVlanTable 1.3.6.1.4.1.25506.8.35.6.1.10 no-access
RSTP extended information of vlan
               hh3cdot1dStpIgnoredVlanEntry 1.3.6.1.4.1.25506.8.35.6.1.10.1 no-access
RSTP extended information of the vlan
                   hh3cdot1dVlan 1.3.6.1.4.1.25506.8.35.6.1.10.1.1 integer read-only
Vlan id supported
                   hh3cdot1dStpIgnore 1.3.6.1.4.1.25506.8.35.6.1.10.1.2 integer read-write
Whether the vlan is stp Ignored Enumeration: 'enable': 1, 'disable': 2.