HH3C-LswMix-MIB: View SNMP OID List / Download MIB

VENDOR: H3C

Home	MIB: HH3C-LswMix-MIB
Download as:		SNMPv2-CONF, HH3C-LSW-DEV-ADM-MIB, SNMPv2-SMI, HH3C-OID-MIB, SNMPv2-TC		Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash). Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded. The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.

Object Name	OID	Type	Access	Info
hh3cLswMix	1.3.6.1.4.1.25506.8.35.17
hh3cLswLastSwitchDate	1.3.6.1.4.1.25506.8.35.17.1	integer	read-only	This object indicates the date of the most recent change to the mpu(Main Processing Unit).
hh3cLswLastSwitchTime	1.3.6.1.4.1.25506.8.35.17.2	integer	read-only	This object indicates the time of the most recent change to the mpu.
hh3cLswMpuSwitchsNum	1.3.6.1.4.1.25506.8.35.17.3	integer	read-only	This object indicates the total times of the mpu switched since the system start up.
hh3cLswMpuSwitch	1.3.6.1.4.1.25506.8.35.17.4	integer	read-write	Setting this object will immediately switch the standby mpu to master mpu. Read is not supported. Enumeration: 'switch': 1.
hh3cLswXSlotTable	1.3.6.1.4.1.25506.8.35.17.5		no-access	The source main table.
hh3cLswXSlotEntry	1.3.6.1.4.1.25506.8.35.17.5.1		no-access	An entry in the source main table.
hh3cLswMainCardBoardStatus	1.3.6.1.4.1.25506.8.35.17.5.1.1	integer	read-only	The value describes whether the board is master, standby or process. master and standby are the possible states for the mpu, while process indicates the state of lpu(Line Processing Unit) Enumeration: 'standby': 2, 'process': 3, 'master': 1.
hh3cLswCrossBarStatus	1.3.6.1.4.1.25506.8.35.17.5.1.2	integer	read-only	The value describes whether the crossbar is master or standby. It is master when it's in the master mpu board, standby when in the standby mpu. But both crossbars in mpus are master when the device in load-balance mode. Enumeration: 'standby': 2, 'master': 1.
hh3csMixTrapMib	1.3.6.1.4.1.25506.8.35.17.10
hh3cSlaveSwitchOver	1.3.6.1.4.1.25506.8.35.17.10.1			An hh3cSlaveSwitchOver trap signifies that the action of standby mpu switching to master has completed.