HH3C-LI-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-LI-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMP-FRAMEWORK-MIB, SNMPv2-SMI, INET-ADDRESS-MIB, HH3C-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cLI 1.3.6.1.4.1.25506.2.111
Lawful Interception MIB
         hh3cLICommon 1.3.6.1.4.1.25506.2.111.1
             hh3cLITrapBindObjects 1.3.6.1.4.1.25506.2.111.1.1
                 hh3cLIBoardInformation 1.3.6.1.4.1.25506.2.111.1.1.1 unsigned32 no-access
It is a slot number.
             hh3cLINotifications 1.3.6.1.4.1.25506.2.111.1.2
                 hh3cLINotificationsPrefix 1.3.6.1.4.1.25506.2.111.1.2.0
                     hh3cLIActive 1.3.6.1.4.1.25506.2.111.1.2.0.1
This Notification is sent when a type of intercepting configuration is changed from inactive to active. The value of the hh3cLIStreamtype which identify the actual intercept stream is included in this notification.
                     hh3cLITimeOut 1.3.6.1.4.1.25506.2.111.1.2.0.2
When the time specified in hh3cLIMediationTimeout arrives, the device notifies the manager corresponding intercept is removed.
                     hh3cLIFailureInformation 1.3.6.1.4.1.25506.2.111.1.2.0.3
When interception is configured on distributed device, the configuration perhaps failed on some board. If this happened, this notification will occur.
             hh3cLIObjects 1.3.6.1.4.1.25506.2.111.1.3
                 hh3cLINewIndex 1.3.6.1.4.1.25506.2.111.1.3.1 integer32 read-only
This object will be used as an index value for a new hh3cLIMediationEntry. Whenever read, the agent will give a non-used value. This is to reduce the probability of conflict during creation of new hh3cLIMediationTable entries.
                 hh3cLIMediationTable 1.3.6.1.4.1.25506.2.111.1.3.2 no-access
This table describes interception gateway information with which interception device communicates.
                     hh3cLIMediationEntry 1.3.6.1.4.1.25506.2.111.1.3.2.1 no-access
An entry of configuring mediation device.
                         hh3cLIMediationIndex 1.3.6.1.4.1.25506.2.111.1.3.2.1.1 integer32 no-access
hh3cLIMediationIndex is a entry identifier. The Mediation Device should be responsible for making sure these are unique. Before creating a new entry, a value for this variable may be obtained by reading hh3cLINewIndex to reduce the probability of a value collision.
                         hh3cLIMediationDestAddrType 1.3.6.1.4.1.25506.2.111.1.3.2.1.2 inetaddresstype read-write
The type of hh3cLIMediationDestAddr.
                         hh3cLIMediationDestAddr 1.3.6.1.4.1.25506.2.111.1.3.2.1.3 inetaddress read-write
The IP Address of the Mediation Device to receive intercepted traffic.
                         hh3cLIMediationDestPort 1.3.6.1.4.1.25506.2.111.1.3.2.1.4 inetportnumber read-write
The L4-port number on the Mediation Device to receive intercepted traffic.
                         hh3cLIMediationSrcInterface 1.3.6.1.4.1.25506.2.111.1.3.2.1.5 interfaceindexorzero read-write
The interface on the intercepting device from which to transmit intercepted data. If zero, intercepting device will select an outbound interface according to hh3cLIMediationDestAddr.
                         hh3cLIMediationDscp 1.3.6.1.4.1.25506.2.111.1.3.2.1.6 integer32 read-write
The Differentiated Services Code Point the intercepting device applies to the IP packets encapsulating the intercepted traffic.
                         hh3cLIMediationTimeOut 1.3.6.1.4.1.25506.2.111.1.3.2.1.7 dateandtime read-write
The time at which this row and all related Stream Table rows should be automatically removed, and the intercept function expire.
                         hh3cLIMediationTransport 1.3.6.1.4.1.25506.2.111.1.3.2.1.8 integer read-write
The protocol used in transferring intercepted data to the Mediation Device. Enumeration: 'udp': 1.
                         hh3cLIMediationNotificationEnable 1.3.6.1.4.1.25506.2.111.1.3.2.1.9 truthvalue read-write
This variable controls the generation of any notifications or informs by the MIB agent for this table entry.
                         hh3cLIMediationRowStatus 1.3.6.1.4.1.25506.2.111.1.3.2.1.10 rowstatus read-only
Operation status of this table entry.
                 hh3cLIStreamTable 1.3.6.1.4.1.25506.2.111.1.3.3 no-access
This table lists the traffic stream's type to be intercepted. The specified filter is defined in hh3cLIIPStreamTable, hh3cLIMACStreamTable or hh3cLIUserStreamTable, according to hh3cLIStreamtype. Also it contains counters for packets to be intercepted and dropped by attached type of filter.
                     hh3cLIStreamEntry 1.3.6.1.4.1.25506.2.111.1.3.3.1 no-access
A single type of data stream to be intercepted.
                         hh3cLIStreamIndex 1.3.6.1.4.1.25506.2.111.1.3.3.1.1 integer32 no-access
The index of the stream entry.
                         hh3cLIStreamtype 1.3.6.1.4.1.25506.2.111.1.3.3.1.2 integer read-write
Identifies the type of stream, and according to it uses filter table. It can not be changed after a filter table is attached to it. The following types of streams are supported: ip: IP filter. The exact definition is a row in hh3cLIIPStreamTable. mac: MAC filter. The exact definition is a row in hh3cLIMACStreamTable. userConnecton: User connection filter. The exact definition is a row in hh3cLIUserStreamTable. Enumeration: 'ip': 1, 'mac': 2, 'userConnection': 3.
                         hh3cLIStreamEnable 1.3.6.1.4.1.25506.2.111.1.3.3.1.3 truthvalue read-write
If 'true', the interception is active. And it is set to 'true' only after an additional filter specification has been attached to this stream.
                         hh3cLIStreamPackets 1.3.6.1.4.1.25506.2.111.1.3.3.1.4 counter32 read-only
The numbers of packets that have been intercepted.
                         hh3cLIStreamDrops 1.3.6.1.4.1.25506.2.111.1.3.3.1.5 counter32 read-only
The numbers of packets were dropped in the lawful intercept process.
                         hh3cLIStreamHPackets 1.3.6.1.4.1.25506.2.111.1.3.3.1.6 counter64 read-only
The numbers of packets have been intercepted. This object is a 64-bit version of hh3cLIStreamPackets.
                         hh3cLIStreamHDrops 1.3.6.1.4.1.25506.2.111.1.3.3.1.7 counter64 read-only
The numbers of packets were dropped in the lawful intercept process. This object is a 64-bit version of hh3cLIStreamDrops.
                         hh3cLIStreamRowStatus 1.3.6.1.4.1.25506.2.111.1.3.3.1.8 rowstatus read-only
Operation status of this table entry.
         hh3cLIIPStream 1.3.6.1.4.1.25506.2.111.2
             hh3cLIIPStreamObjects 1.3.6.1.4.1.25506.2.111.2.1
                 hh3cLIIPStreamTable 1.3.6.1.4.1.25506.2.111.2.1.1 no-access
This table lists the IPv4 and IPv6 streams to be intercepted. It is associated with hh3cLIMediationTable and hh3cLIStreamTable.
                     hh3cLIIPStreamEntry 1.3.6.1.4.1.25506.2.111.2.1.1.1 no-access
A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hh3cLIStreamTable. The second index permits multiple classifiers to be used together, such as having an IP address as source or destination.
                         hh3cLIIPStreamInterface 1.3.6.1.4.1.25506.2.111.2.1.1.1.1 interfaceindexorzero read-write
Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any interface. Then at least one additional parameter must be selected, and not be default value.
                         hh3cLIIPStreamAddrType 1.3.6.1.4.1.25506.2.111.2.1.1.1.2 inetaddresstype read-write
The type of address, used in packet selection.
                         hh3cLIIPStreamDestAddr 1.3.6.1.4.1.25506.2.111.2.1.1.1.3 inetaddress read-write
The Destination address used in packet selection. This address will be consistent with the type specified in hh3cLIIPStreamAddrType.
                         hh3cLIIPStreamDestAddrLength 1.3.6.1.4.1.25506.2.111.2.1.1.1.4 inetaddressprefixlength read-write
The length of the Destination Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hh3cLIIPStreamAddrType.
                         hh3cLIIPStreamSrcAddr 1.3.6.1.4.1.25506.2.111.2.1.1.1.5 inetaddress read-write
The Source Address used in packet selection. This address will be consistent with the type specified in hh3cLIIPStreamAddrType.
                         hh3cLIIPStreamSrcAddrLength 1.3.6.1.4.1.25506.2.111.2.1.1.1.6 inetaddressprefixlength read-write
The length of the Source Prefix. A value of zero means all addresses to match. This prefix length will be consistent with the type specified in hh3cLIIPStreamAddrType.
                         hh3cLIIPStreamTosByte 1.3.6.1.4.1.25506.2.111.2.1.1.1.7 integer32 read-write
The value of the TOS byte. If hh3cLIIPStreamTosByte&(~hh3cLIIPStreamTosByteMask)!=0, configuration is rejected.
                         hh3cLIIPStreamTosByteMask 1.3.6.1.4.1.25506.2.111.2.1.1.1.8 integer32 read-write
This value is ANDed with the value of the TOS byte in a packet and compared with hh3cLIIPStreamTosByte. If the values are equal, the comparison is equal. If both the mask and the TosByte value are zero, the result is to always accept.
                         hh3cLIIPStreamFlowId 1.3.6.1.4.1.25506.2.111.2.1.1.1.9 integer32 read-write
The flow identifier in an IPv6 header. -1 indicates that the Flow Id is unused.
                         hh3cLIIPStreamProtocol 1.3.6.1.4.1.25506.2.111.2.1.1.1.10 integer32 read-write
The IP protocol to match against the IPv4 protocol number or the IPv6 Next- Header number in the packet.
                         hh3cLIIPStreamDestL4PortMin 1.3.6.1.4.1.25506.2.111.2.1.1.1.11 inetportnumber read-write
The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hh3cLIIPStreamDestL4PortMax. If both hh3cLIIPStreamDestL4PortMin and hh3cLIIPStreamDestL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamDestL4PortMin is equal to hh3cLIIPStreamDestL4PortMax, only one port number to be intercepted.
                         hh3cLIIPStreamDestL4PortMax 1.3.6.1.4.1.25506.2.111.2.1.1.1.12 inetportnumber read-write
The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hh3cLIIPStreamDestL4PortMin. If both hh3cLIIPStreamDestL4PortMin and hh3cLIIPStreamDestL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamDestL4PortMin is equal to hh3cLIIPStreamDestL4PortMax, only one port number to be intercepted.
                         hh3cLIIPStreamSrcL4PortMin 1.3.6.1.4.1.25506.2.111.2.1.1.1.13 inetportnumber read-write
The minimum value that the layer-4 destination port number in the packet must have in order to match. This value must be equal to or less than the value specified for this entry in hh3cLIIPStreamSrcL4PortMax. If both hh3cLIIPStreamSrcL4PortMin and hh3cLIIPStreamSrcL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamSrcL4PortMin is equal to hh3cLIIPStreamSrcL4PortMax, only one port number to be intercepted.
                         hh3cLIIPStreamSrcL4PortMax 1.3.6.1.4.1.25506.2.111.2.1.1.1.14 inetportnumber read-write
The maximum value that the layer-4 destination port number in the packet must have in order to match this classifier entry. This value must be equal to or greater than the value specified for this entry in hh3cLIIPStreamSrcL4PortMin. If both hh3cLIIPStreamSrcL4PortMin and hh3cLIIPStreamSrcL4PortMax are at their default values, the port number is effectively unused. If hh3cLIIPStreamSrcL4PortMin is equal to hh3cLIIPStreamSrcL4PortMax, only one port number to be intercepted.
                         hh3cLIIPStreamVRF 1.3.6.1.4.1.25506.2.111.2.1.1.1.15 snmpadminstring read-write
It is the name of a Virtual Routing and Forwarding (VRF) of a VPN.
                         hh3cLIIPStreamRowStatus 1.3.6.1.4.1.25506.2.111.2.1.1.1.18 rowstatus read-only
Operation status of this table entry.
         hh3cLIMACStream 1.3.6.1.4.1.25506.2.111.3
             hh3cLIMACStreamObjects 1.3.6.1.4.1.25506.2.111.3.1
                 hh3cLIMACStreamTable 1.3.6.1.4.1.25506.2.111.3.1.1 no-access
This table lists the IEEE 802 streams to be intercepted. It is associated with hh3cLIMediationTable and hh3cLIStreamTable.
                     hh3cLIMACStreamEntry 1.3.6.1.4.1.25506.2.111.3.1.1.1 no-access
A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hh3cLIStreamTable. The second index permits multiple classifiers to be used together, such as having an MAC address as source or destination.
                         hh3cLIMACStreamFields 1.3.6.1.4.1.25506.2.111.3.1.1.1.1 bits read-write
This object displays what attributes will be compared to identify traffic. interface: indicates that traffic on the stated interface is to be intercepted dstMacAddress: indicates that traffic destined to a given address should be intercepted srcMacAddress: indicates that traffic sourced from a given address should be intercepted ethernetPid: indicates that traffic with a stated Ethernet Protocol Identifier should be intercepted dSap: indicates that traffic with an certain 802.2 LLC Destination SAP should be intercepted sSap: indicates that traffic with an certain 802.2 LLC Source SAP should be intercepted At least one of the bits has to be set in order to activate an entry. If multiple bits are set, traffic to be intercepted must be satisfied with all set attributes. Bits: 'dSap': 4, 'sSap': 5, 'ethernetPid': 3, 'srcMacAddress': 2, 'interface': 0, 'dstMacAddress': 1.
                         hh3cLIMACStreamInterface 1.3.6.1.4.1.25506.2.111.3.1.1.1.2 interfaceindexorzero read-write
Traffic received or transmitted over this interface will be intercepted. This value must be set when creating a stream entry, either zero, or a valid interface index. If the value is zero, interception accepts any interface. Additional parameter must be selected together.
                         hh3cLIMACStreamDestAddr 1.3.6.1.4.1.25506.2.111.3.1.1.1.3 macaddress read-write
The Destination address used in packet selection.
                         hh3cLIMACStreamSrcAddr 1.3.6.1.4.1.25506.2.111.3.1.1.1.4 macaddress read-write
The Source Address used in packet selection.
                         hh3cLIMACStreamEthPid 1.3.6.1.4.1.25506.2.111.3.1.1.1.5 unsigned32 read-write
The value of the Ethernet Protocol Identifier in the Ethernet traffic or IEEE 802.2 SNAP traffic.
                         hh3cLIMACStreamDSap 1.3.6.1.4.1.25506.2.111.3.1.1.1.6 unsigned32 read-write
The value of the IEEE 802.2 Destination SAP.
                         hh3cLIMACStreamSSap 1.3.6.1.4.1.25506.2.111.3.1.1.1.7 unsigned32 read-write
The value of the IEEE 802.2 Source SAP.
                         hh3cLIMACStreamRowStatus 1.3.6.1.4.1.25506.2.111.3.1.1.1.8 rowstatus read-only
Operation status of this table entry.
         hh3cLIUserStream 1.3.6.1.4.1.25506.2.111.4
             hh3cLIUserStreamObjects 1.3.6.1.4.1.25506.2.111.4.1
                 hh3cLIUserStreamTable 1.3.6.1.4.1.25506.2.111.4.1.1 no-access
This table lists the user connection streams to be intercepted. It is associated with hh3cLIMediationTable and hh3cLIStreamTable.
                     hh3cLIUserStreamEntry 1.3.6.1.4.1.25506.2.111.4.1.1.1 no-access
A single stream to be intercepted. The first index indicates the Mediation Device. The second index is that of the stream's counter entry in the hh3cLIStreamTable. This permits multiple classifiers to be used together.
                         hh3cLIUserStreamAcctSessID 1.3.6.1.4.1.25506.2.111.4.1.1.1.1 octet string read-write
This is the RADIUS attribute 44 acct-session-ID. The string must be set, and the length not be zero.
                         hh3cLIUserStreamRowStatus 1.3.6.1.4.1.25506.2.111.4.1.1.1.2 rowstatus read-only
Operation status of this table entry.