HH3C-HPEOC-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-HPEOC-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HH3C-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cHPEOC 1.3.6.1.4.1.25506.2.84
The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
       hh3cHPEOCSystem 1.3.6.1.4.1.25506.2.84.1
           hh3cHPEOCCltVlanType 1.3.6.1.4.1.25506.2.84.1.1 integer read-write
Control EOC CLT's VLAN type, ieee8021q : 802.1q VLAN mode, portbased : portbased VLAN mode. Enumeration: 'portbased': 2, 'ieee8021q': 1.
           hh3cHPEOCCltVlanManTable 1.3.6.1.4.1.25506.2.84.1.2 no-access
This table implements the management of CLT(Coax Line Terminal) VLAN.
               hh3cHPEOCCltVlanManEntry 1.3.6.1.4.1.25506.2.84.1.2.1 no-access
The entry of the table hh3cHPEOCCltVlanManTable.
                   hh3cHPEOCCltEthPortType 1.3.6.1.4.1.25506.2.84.1.2.1.1 integer read-write
Control CLT ethernet ports' type, normal : port which used for normal translation, debug : port which used for debug. Enumeration: 'debug': 2, 'normal': 1.
           hh3cHPEOCCltSysManTable 1.3.6.1.4.1.25506.2.84.1.3 no-access
This table implements the management of CLT(Coax Line Terminal).
               hh3cHPEOCCltSysManEntry 1.3.6.1.4.1.25506.2.84.1.3.1 no-access
The entry of the table hh3cHPEOCCltSysManTable.
                   hh3cHPEOCCltDescr 1.3.6.1.4.1.25506.2.84.1.3.1.1 displaystring read-write
Set the description of CLT.
                   hh3cHPEOCCltFwVersion 1.3.6.1.4.1.25506.2.84.1.3.1.2 displaystring read-only
EOC firmware version. If the object length is zero, it means the version is unknown.
           hh3cHPEOCCnuSysManTable 1.3.6.1.4.1.25506.2.84.1.4 no-access
This table implements the management of CNUs.
               hh3cHPEOCCnuSysManEntry 1.3.6.1.4.1.25506.2.84.1.4.1 no-access
The entry of the table hh3cHPEOCCnuSysManTable.
                   hh3cHPEOCCnuBcastControl 1.3.6.1.4.1.25506.2.84.1.4.1.1 truthvalue read-write
Broadcast storm suppression status. true(1) - Broadcast storm suppression enable. false(2) - Broadcast storm suppression disable.
                   hh3cHPEOCCnuAnonymStatus 1.3.6.1.4.1.25506.2.84.1.4.1.2 truthvalue read-only
Anonymity status. true(1) - the user which uses the CNU is anonymous. false(2) - the user which uses the CNU has an account.
                   hh3cHPEOCCnuMacLimit 1.3.6.1.4.1.25506.2.84.1.4.1.3 unsigned32 read-write
Configure the max number of MAC address entries which can access through the CNU, it ranges from 1 to 8. Otherwise, If configure 0, the CNU won't limit the MAC address entry. If configure 0xFF, it means no MAC address entry can access the CNU.
           hh3cHPEOCCltAutoUpgrade 1.3.6.1.4.1.25506.2.84.1.5 truthvalue read-write
Auto upgrade Status. true(1) - The firmware of the CNU will be auto changed by CLT. false(2)- The firmware of the CNU will not be auto changed.
           hh3cHPEOCOnLineCnuNumber 1.3.6.1.4.1.25506.2.84.1.6 integer32 read-only
The total number of the online CNU(s).
           hh3cHPEOCCpuMacAddress 1.3.6.1.4.1.25506.2.84.1.7 macaddress read-only
EOC CPU's MAC address.
           hh3cHPEOCOffLineCnuNumber 1.3.6.1.4.1.25506.2.84.1.8 integer32 read-only
The total number of the offline CNU(s).
           hh3cHPEOCDownLoadCNUFWResult 1.3.6.1.4.1.25506.2.84.1.9 displaystring no-access
Download CNU firmware result.
           hh3cHPEOCCltAutoUpgradeType 1.3.6.1.4.1.25506.2.84.1.10 integer read-write
Type of auto upgrade status. It depends on hh3cHPEOCCltAutoUpgrade status. flash - The CLT auto upgrade the firmware inside its flash to the CNUs. ftp - First download the firmware from FTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. tftp - First download the firmware from TFTP server to the CLT, then the CLT auto upgrade the firmware to the CNUs. Enumeration: 'ftp': 2, 'tftp': 3, 'flash': 1.
           hh3cHPEOCAutoUpObjects 1.3.6.1.4.1.25506.2.84.1.11
                 hh3cHPEOCServerAddress 1.3.6.1.4.1.25506.2.84.1.11.1 ipaddress read-write
The address of remote host acting as server for operation. The default value is 0.0.0.0
                 hh3cHPEOCServerUser 1.3.6.1.4.1.25506.2.84.1.11.2 displaystring read-write
When using ftp to transfer files, the user name must be specified through this node. It contains 1 to 30 characters.
                 hh3cHPEOCServerPassword 1.3.6.1.4.1.25506.2.84.1.11.3 displaystring read-write
Remote user password for copying via ftp protocol. Optionally, this object may be ignored for protocols other than ftp. It contains 1 to 31 characters.
       hh3cHPEOCCableInfo 1.3.6.1.4.1.25506.2.84.2
           hh3cHPEOCCableInfoTable 1.3.6.1.4.1.25506.2.84.2.1 no-access
This table defines the primary parameters of the cable information.
               hh3cHPEOCCableInfoEntry 1.3.6.1.4.1.25506.2.84.2.1.1 no-access
The entry of the table hh3cHPEOCCableInfoTable.
                   hh3cHPEOCFECErrors 1.3.6.1.4.1.25506.2.84.2.1.1.1 counter64 read-only
The cable port's FEC bits errors ratio. FEC means the payload Forward Error Correction. It's a technology of controlling errors. Packets in transmission is checked by the receiver, if error occurs, the receiver will announce the sender to resend.
                   hh3cHPEOCAvgBitsPerCarrier 1.3.6.1.4.1.25506.2.84.2.1.1.2 unsigned32 read-only
The cable port's average bits per carrier.
                   hh3cHPEOCAvgSNRPerCarrier 1.3.6.1.4.1.25506.2.84.2.1.1.3 integer32 read-only
The cable port's signal noise ratio(SNR) bits per carrier.
                   hh3cHPEOCAvgInPBCRCErrors 1.3.6.1.4.1.25506.2.84.2.1.1.4 unsigned32 read-only
The input PB CRC errors on average.
                   hh3cHPEOCInTotalPkts 1.3.6.1.4.1.25506.2.84.2.1.1.5 counter64 read-only
The total number of packets(including bad packets) received on this interface.
                   hh3cHPEOCAvgOutPower 1.3.6.1.4.1.25506.2.84.2.1.1.6 integer32 read-only
The cable port's power sent on average, the unit is db.
                   hh3cHPEOCAvgOutPBCRCErrors 1.3.6.1.4.1.25506.2.84.2.1.1.7 unsigned32 read-only
The cable port's physical block(PB) cyclic redundancy check(CRC) errors sent on average.
                   hh3cHPEOCOutTotalPkts 1.3.6.1.4.1.25506.2.84.2.1.1.8 counter64 read-only
The total count of the packets(including bad packets) sent on this interface.
           hh3cHPEOCBitPerSymbolTable 1.3.6.1.4.1.25506.2.84.2.2 no-access
This table defines the bits per symbol parameters of the cable line.
               hh3cHPEOCBitPerSymbolEntry 1.3.6.1.4.1.25506.2.84.2.2.1 no-access
The entry of the table hh3cHPEOCBitPerSymbolTable.
                   hh3cHPEOCBitPerSymbolIndex 1.3.6.1.4.1.25506.2.84.2.2.1.1 unsigned32 no-access
The index of the hh3cHPEOCBitPerSymbolTable.
                   hh3cHPEOCBitPerSymbol 1.3.6.1.4.1.25506.2.84.2.2.1.2 octet string read-only
hh3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed frequency. Each 4 bits stand for one value, all the values picking-up will make up a cable bit map.