HH3C-DOT11-RRM-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-DOT11-RRM-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HH3C-DOT11-REF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cDot11RRM 1.3.6.1.4.1.25506.2.75.8
This MIB file is to provide the object definition of WLAN radio resource management (RRM).
     hh3cDot11RRMConfigGroup 1.3.6.1.4.1.25506.2.75.8.1
         hh3cDot11RRMGlobalCfgPara 1.3.6.1.4.1.25506.2.75.8.1.1
             hh3cDot11RRM11nMadtMaxMcs 1.3.6.1.4.1.25506.2.75.8.1.1.1 integer32 read-write
Specify the maximum modulation and coding scheme (MCS) index for 802.11n mandatory rates. The value 255 indicates that no maximum MCS index is specified. No maximum MCS index is specified for 802.11n mandatory rates by default. Besides 255, the specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
             hh3cDot11RRM11nSuptMaxMcs 1.3.6.1.4.1.25506.2.75.8.1.1.2 integer32 read-write
Specify the maximum Modulation and Coding Scheme (MCS) index for 802.11n supported rates. The specified maximum MCS index for 802.11n supported rates must be no less than the specified maximum MCS index for 802.11n mandatory rates.
             hh3cDot11RRM11gProtect 1.3.6.1.4.1.25506.2.75.8.1.1.3 truthvalue read-write
Enable/Disable dot11g protection.
             hh3cDot11RRM11aPwrConstrt 1.3.6.1.4.1.25506.2.75.8.1.1.4 integer32 read-write
Configure the power constraint for all 802.11a radios. The configured power constraint is advertised in beacons if spectrum management is enabled. The range of power constraint is 0 to MAX-POWER-1 (where the MAX-POWER is defined by the regulatory domain).
             hh3cDot11RRM11aSpectrumManag 1.3.6.1.4.1.25506.2.75.8.1.1.5 truthvalue read-write
Enable/Disable spectrum management for 802.11a radios. When spectrum management is enabled, the WLAN sub-system advertises power capabilities of the AP and power constraints applicable to all devices in the BSS based on regulatory domain specification.
             hh3cDot11RRMAutoChlAvoid11h 1.3.6.1.4.1.25506.2.75.8.1.1.6 truthvalue read-write
Configure the auto-channel set as non-dot11h channels, this is, only the non-dot11h channels belonging to the country code are scanned during initial channel selection and one of them is selected.
             hh3cDot11RRMScanChl 1.3.6.1.4.1.25506.2.75.8.1.1.7 integer read-write
Set the scan mode. auto: When this option is set, all channels of the country code being set are scanned. all: When this option is set, all the channels of the radio band are scanned. Enumeration: 'auto': 1, 'all': 2.
             hh3cDot11RRMScanRptIntvel 1.3.6.1.4.1.25506.2.75.8.1.1.8 integer32 read-write
Set the scan report interval.
             hh3cDot11APInterfNumThreshhd 1.3.6.1.4.1.25506.2.75.8.1.1.9 integer32 read-write
Represents threshold of AP interference . If the value of AP interference exceeds this threshold, AP interference trap will be sent. If the value of this node is zero, AP interference trap will be sent immediately.
             hh3cDot11StaInterfNumThreshhd 1.3.6.1.4.1.25506.2.75.8.1.1.10 integer32 read-write
Represents threshold of STA interference. If the value of STA interference exceeds this threshold, STA interference trap will be sent. If the value of this node is zero, STA interference trap will be sent immediately.
         hh3cDot11RRMRadioCfgTable 1.3.6.1.4.1.25506.2.75.8.1.2 no-access
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
             hh3cDot11RRMRadioCfgEntry 1.3.6.1.4.1.25506.2.75.8.1.2.1 no-access
Configure WLAN RRM based radio type. When 802.11b parameter is modified, 802.11g parameter will be changed at the same time. In the same way, when 802.11g parameter is modified, 802.11b parameter will be changed at the same time.
                 hh3cDot11RRMRadioType 1.3.6.1.4.1.25506.2.75.8.1.2.1.1 hh3cdot11radiotype no-access
802.11 radio type.
                 hh3cDot11RRMCfgChlState 1.3.6.1.4.1.25506.2.75.8.1.2.1.2 truthvalue read-write
Enable/Disable dynamic channel selection.
                 hh3cDot11RRMCfgChlMode 1.3.6.1.4.1.25506.2.75.8.1.2.1.3 integer read-write
Configure the mode of channel selection. This node can be configured only when dynamic channel selection is enabled. Enumeration: 'selfDecisive': 1, 'userTriggered': 2.
                 hh3cDot11RRMChlProntoRadioElmt 1.3.6.1.4.1.25506.2.75.8.1.2.1.4 unsigned32 read-write
Specify the AP and radio that will change channel at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of channel selection control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
                 hh3cDot11RRMCfgPwrState 1.3.6.1.4.1.25506.2.75.8.1.2.1.5 truthvalue read-write
Enable/Disable dynamic power selection for the band.
                 hh3cDot11RRMCfgPwrMode 1.3.6.1.4.1.25506.2.75.8.1.2.1.6 integer read-write
Configure the mode of transmit power control. This node can be configured only when dynamic power selection is enabled. Enumeration: 'selfDecisive': 1, 'userTriggered': 2.
                 hh3cDot11RRMPwrProntoRadioElmt 1.3.6.1.4.1.25506.2.75.8.1.2.1.7 unsigned32 read-write
Specify the AP and radio that will change power at next calibration cycle. 0 is returned when getting the value of this node. This node can be configured only when the mode of transmit power control is user-triggered. When configuring, the higher 24 bits stand for the AP index, and the last 8 bits stand for the radio index. 4294967295 stand for configuring each radio on all APs.
                 hh3cDot11RRMCfgIntrvl 1.3.6.1.4.1.25506.2.75.8.1.2.1.8 integer32 read-write
Configure the calibration interval.
                 hh3cDot11RRMCfgIntrfThres 1.3.6.1.4.1.25506.2.75.8.1.2.1.9 integer32 read-write
Configure the interface threshold. By default, interference observed on an operating channel is considered during dynamic frequency selection and transmit power control. If the interference percentage on the channel reaches the set threshold, RRM will perform resource adjustment to control the situation.
                 hh3cDot11RRMCfgNoiseThres 1.3.6.1.4.1.25506.2.75.8.1.2.1.10 integer32 read-write
Configure the noise threshold.
                 hh3cDot11RRMCfgPERThres 1.3.6.1.4.1.25506.2.75.8.1.2.1.11 integer32 read-write
Configure the CRC error threshold. If the percentage of CRC errors reaches the threshold, RRM will perform resource adjustment to control the situation.
                 hh3cDot11RRMCfgToleranceFctr 1.3.6.1.4.1.25506.2.75.8.1.2.1.12 integer32 read-write
Configure the tolerance level. During dynamic frequency selection (DFS), the channel will be changed only if there is a better channel having lesser interference and packet error rate than those specified by the user.
                 hh3cDot11RRMCfgAdjacencyFctr 1.3.6.1.4.1.25506.2.75.8.1.2.1.13 integer32 read-write
Configure the adjacency factor for the band. If transmit power control (TPC) is configured, power will be adjusted when the nth neighbor is detected. The value n is the adjacency factor.
         hh3cDot11RRMAPCfgTable 1.3.6.1.4.1.25506.2.75.8.1.3 no-access
This table defines the RRM parameters for AP.
             hh3cDot11RRMAPCfgEntry 1.3.6.1.4.1.25506.2.75.8.1.3.1 no-access
Each entry contains information of RRM parameters for AP.
                 hh3cDot11RRMAPWorkMode 1.3.6.1.4.1.25506.2.75.8.1.3.1.1 integer read-write
AP work mode. Enumeration: 'hybrid': 3, 'monitor': 2, 'normal': 1.
         hh3cDot11RRMSDRadioGroupTable 1.3.6.1.4.1.25506.2.75.8.1.4 no-access
This table defines RRM self-decisive radio group.
             hh3cDot11RRMSDRadioGroupEntry 1.3.6.1.4.1.25506.2.75.8.1.4.1 no-access
Each entry contains information of one RRM self-decisive radio group.
                 hh3cDot11RRMSDRadioGroupId 1.3.6.1.4.1.25506.2.75.8.1.4.1.1 unsigned32 no-access
Represents RRM self-decisive radio group ID.
                 hh3cDot11RRMSDRadioGroupDesc 1.3.6.1.4.1.25506.2.75.8.1.4.1.2 octet string read-only
Represents the description of RRM self-decisive radio group.
                 hh3cDot11RRMSDRdGrpChlHolddownTm 1.3.6.1.4.1.25506.2.75.8.1.4.1.3 unsigned32 read-only
Represents the channel holddown time of RRM self-decisive radio group.
                 hh3cDot11RRMSDRdGrpPwrHolddownTm 1.3.6.1.4.1.25506.2.75.8.1.4.1.4 unsigned32 read-only
Represents the power holddown time of RRM self-decisive radio group.
                 hh3cDot11RRMSDRdGroupRowStatus 1.3.6.1.4.1.25506.2.75.8.1.4.1.5 rowstatus read-only
The row status of this table entry.
         hh3cDot11RRMAPCfg2Table 1.3.6.1.4.1.25506.2.75.8.1.5 no-access
This table defines the RRM parameters for AP.
             hh3cDot11RRMAPCfg2Entry 1.3.6.1.4.1.25506.2.75.8.1.5.1 no-access
Each entry contains information of RRM parameters for AP.
                 hh3cDot11RRMAPSerialID 1.3.6.1.4.1.25506.2.75.8.1.5.1.1 hh3cdot11objectidtype no-access
Serial ID of the AP.
                 hh3cDot11RRMAPIntfThreshold 1.3.6.1.4.1.25506.2.75.8.1.5.1.2 integer32 read-write
Represents threshold of AP interference . If the number of AP interference exceeds this threshold, AP interference trap will be sent.
                 hh3cDot11RRMStaIntfThreshold 1.3.6.1.4.1.25506.2.75.8.1.5.1.3 integer32 read-write
Represents threshold of STA interference. If the number of STA interference exceeds this threshold, station interference trap will be sent.
                 hh3cDot11RRMCoChlIntfTrapThhd 1.3.6.1.4.1.25506.2.75.8.1.5.1.4 integer32 read-write
Represents threshold of interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
                 hh3cDot11RRMAdjChlIntfTrapThhd 1.3.6.1.4.1.25506.2.75.8.1.5.1.5 integer32 read-write
Represents threshold of adjacent interference trap with current ap. If signal strength of the device exceeds this threshold, corresponding trap will be sent.
     hh3cDot11RRMDetectGroup 1.3.6.1.4.1.25506.2.75.8.2
         hh3cDot11RRMChlRptTable 1.3.6.1.4.1.25506.2.75.8.2.1 no-access
This table shows the RRM channel information of each radio on all APs.
             hh3cDot11RRMChlRptEntry 1.3.6.1.4.1.25506.2.75.8.2.1.1 no-access
Each entry contains information of RRM channel information of the radio on the AP.
                 hh3cDot11RRMRadioIndex 1.3.6.1.4.1.25506.2.75.8.2.1.1.1 hh3cdot11radioelementindex no-access
Represents index of the radio.
                 hh3cDot11RRMChlRptChlNum 1.3.6.1.4.1.25506.2.75.8.2.1.1.2 integer32 no-access
Channel number.
                 hh3cDot11RRMChlRptChlType 1.3.6.1.4.1.25506.2.75.8.2.1.1.3 integer read-only
Channel type. Enumeration: 'offChannel': 2, 'primeChannel': 1.
                 hh3cDot11RRMChlRptChlQlty 1.3.6.1.4.1.25506.2.75.8.2.1.1.4 integer read-only
Channel quality. Enumeration: 'bad': 2, 'good': 1.
                 hh3cDot11RRMChlRptNbrCnt 1.3.6.1.4.1.25506.2.75.8.2.1.1.5 integer32 read-only
Number of neighbors found on the channel.
                 hh3cDot11RRMChlRptLoad 1.3.6.1.4.1.25506.2.75.8.2.1.1.6 integer32 read-only
Load observed on the channel in percentage.
                 hh3cDot11RRMChlRptUtlz 1.3.6.1.4.1.25506.2.75.8.2.1.1.7 integer32 read-only
Utilization of the channel in percentage.
                 hh3cDot11RRMChlRptIntrf 1.3.6.1.4.1.25506.2.75.8.2.1.1.8 integer32 read-only
Interference observed on the channel in percentage.
                 hh3cDot11RRMChlRptPER 1.3.6.1.4.1.25506.2.75.8.2.1.1.9 integer32 read-only
Packet error rate observed on the channel in percentage.
                 hh3cDot11RRMChlRptRetryRate 1.3.6.1.4.1.25506.2.75.8.2.1.1.10 integer32 read-only
Percentage of retransmission happened on the channel.
                 hh3cDot11RRMChlRptNoise 1.3.6.1.4.1.25506.2.75.8.2.1.1.11 integer32 read-only
Noise observed on the channel.
                 hh3cDot11RRMChlRptRadarIndtcr 1.3.6.1.4.1.25506.2.75.8.2.1.1.12 integer read-write
Radar detection status. Enumeration: 'detected': 1, 'notDetected': 2.
         hh3cDot11RRMNbrInfoTable 1.3.6.1.4.1.25506.2.75.8.2.2 no-access
This table shows the RRM neighbor information of each radio on all APs.
             hh3cDot11RRMNbrInfoEntry 1.3.6.1.4.1.25506.2.75.8.2.2.1 no-access
Each entry contains information of RRM neighbor information of the radio on an AP.
                 hh3cDot11RrmNbrBSSID 1.3.6.1.4.1.25506.2.75.8.2.2.1.1 macaddress no-access
MAC address of the AP.
                 hh3cDot11RrmNbrChl 1.3.6.1.4.1.25506.2.75.8.2.2.1.2 hh3cdot11channelscopetype read-only
Channel number on which the neighbor was found.
                 hh3cDot11RRMNbrIntrf 1.3.6.1.4.1.25506.2.75.8.2.2.1.3 integer32 read-only
Interference observed on the channel in percentage by neighbor.
                 hh3cDot11RrmNbrRSSI 1.3.6.1.4.1.25506.2.75.8.2.2.1.4 integer32 read-only
Signal strength of the AP in dBm.
                 hh3cDot11RrmNbrType 1.3.6.1.4.1.25506.2.75.8.2.2.1.5 integer read-only
Type of the AP, managed or unmanaged. Enumeration: 'unmanaged': 2, 'managed': 1.
                 hh3cDot11RrmNbrSSID 1.3.6.1.4.1.25506.2.75.8.2.2.1.6 hh3cdot11ssidstringtype read-only
SSID of the Neighbor.
         hh3cDot11RRMHistoryTable 1.3.6.1.4.1.25506.2.75.8.2.3 no-access
This table shows the details of the latest three channel changes and power changes applied on all APs, including time of change, reason of the change and the channel, power, interference parameters.
             hh3cDot11RRMHistoryEntry 1.3.6.1.4.1.25506.2.75.8.2.3.1 no-access
Each entry shows the details of channel and power changes.
                 hh3cDot11RRMHistoryId 1.3.6.1.4.1.25506.2.75.8.2.3.1.1 integer32 no-access
History number of the change.
                 hh3cDot11RRMHistoryRecIndctr 1.3.6.1.4.1.25506.2.75.8.2.3.1.2 integer no-access
History record type of the change. Enumeration: 'after': 2, 'before': 1.
                 hh3cDot11RRMHistoryChl 1.3.6.1.4.1.25506.2.75.8.2.3.1.3 hh3cdot11channelscopetype read-only
Channel on which the radio operates before/after the change of channel or power.
                 hh3cDot11RRMHistoryPwr 1.3.6.1.4.1.25506.2.75.8.2.3.1.4 integer32 read-only
Power of the radio before/after the change of channel or power.
                 hh3cDot11RRMHistoryLoad 1.3.6.1.4.1.25506.2.75.8.2.3.1.5 integer32 read-only
Load observed on the radio in percentage before/after the change of channel or power.
                 hh3cDot11RRMHistoryUtlz 1.3.6.1.4.1.25506.2.75.8.2.3.1.6 integer32 read-only
Utilization of the radio in percentage before/after the change of channel or power.
                 hh3cDot11RRMHistoryIntrf 1.3.6.1.4.1.25506.2.75.8.2.3.1.7 integer32 read-only
Interference observed on the radio in percentage before/after the change of channel or power.
                 hh3cDot11RRMHistoryNoise 1.3.6.1.4.1.25506.2.75.8.2.3.1.8 integer32 read-only
Noise observed on the radio before/after the change of channel or power.
                 hh3cDot11RRMHistoryPER 1.3.6.1.4.1.25506.2.75.8.2.3.1.9 integer32 read-only
Packet error rate observed on the radio in percentage before/after the change of channel or power.
                 hh3cDot11RRMHistoryRetryRate 1.3.6.1.4.1.25506.2.75.8.2.3.1.10 integer32 read-only
Percentage of retransmission happened on the radio before/after the change of channel or power.
                 hh3cDot11RRMHistoryChgReason 1.3.6.1.4.1.25506.2.75.8.2.3.1.11 bits read-only
Reason for the change of channel or power. The various bit positions are: |0 |Others | |1 |Coverage | |2 |Radar | |3 |Retransmission | |4 |Packets discarded | |5 |Interference | 0 is returned when the history record type is after. Bits: 'retransmission': 3, 'interference': 5, 'radar': 2, 'packetsDiscarded': 4, 'coverage': 1, 'others': 0.
                 hh3cDot11RRMHistoryChgDateTime 1.3.6.1.4.1.25506.2.75.8.2.3.1.12 dateandtime read-only
The time when the channel or power change occurred.
     hh3cDot11RRMNotifyGroup 1.3.6.1.4.1.25506.2.75.8.3
         hh3cDot11RRMChlQltyNotifications 1.3.6.1.4.1.25506.2.75.8.3.1
             hh3cDot11RRMChlQltyNtfPrefix 1.3.6.1.4.1.25506.2.75.8.3.1.0
                 hh3cDot11RRMIntrfLimit 1.3.6.1.4.1.25506.2.75.8.3.1.0.1
This notification will be sent when interference on the radio exceeds the limit.
                 hh3cDot11RRMPERLimit 1.3.6.1.4.1.25506.2.75.8.3.1.0.2
This notification will be sent when packet error rate on the radio exceeds the limit.
                 hh3cDot11RRMNoiseLimit 1.3.6.1.4.1.25506.2.75.8.3.1.0.3
This notification will be sent when noise on the radio exceeds the limit.
         hh3cDot11RRMResChgNotifications 1.3.6.1.4.1.25506.2.75.8.3.2
             hh3cDot11RRMResChgNtfPrefix 1.3.6.1.4.1.25506.2.75.8.3.2.0
                 hh3cDot11RRMPowerChange 1.3.6.1.4.1.25506.2.75.8.3.2.0.1
This notification will be sent when power changed on the radio automatically.
         hh3cDot11RRMNotificationsVar 1.3.6.1.4.1.25506.2.75.8.3.3
             hh3cDot11NewPower 1.3.6.1.4.1.25506.2.75.8.3.3.1 integer32 no-access
Power of the radio after the change of power.
             hh3cDot11OldPower 1.3.6.1.4.1.25506.2.75.8.3.3.2 integer32 no-access
Power of the radio before the change of power.
     hh3cDot11MonitorDetectedGroup 1.3.6.1.4.1.25506.2.75.8.4
         hh3cDot11MonitorDetectedDevTable 1.3.6.1.4.1.25506.2.75.8.4.1 no-access
This table shows the devices of AP detected
             hh3cDot11MonitorDetectedDevEntry 1.3.6.1.4.1.25506.2.75.8.4.1.1 no-access
Each entry contains information of detected devices.
                 hh3cDot11MonitorDevMAC 1.3.6.1.4.1.25506.2.75.8.4.1.1.1 macaddress no-access
Represents MAC address of the device detected.
                 hh3cDot11MonitorDevType 1.3.6.1.4.1.25506.2.75.8.4.1.1.2 integer read-only
Represents type of the device detected. Enumeration: 'ap': 2, 'client': 1, 'unknown': 5, 'adhoc': 3, 'wirelessBridge': 4.
                 hh3cDot11MonitorDevVendor 1.3.6.1.4.1.25506.2.75.8.4.1.1.3 octet string read-only
Represents vendor of the detected device.
                 hh3cDot11MonitorDevSSID 1.3.6.1.4.1.25506.2.75.8.4.1.1.4 octet string read-only
Represents the service set identifier for the ESS of the device which type is ap or adhoc.
                 hh3cDot11MonitorDevBSSID 1.3.6.1.4.1.25506.2.75.8.4.1.1.5 macaddress read-only
Represents the basic service set identifier of the detected device.
                 hh3cDot11MonitorDevChannel 1.3.6.1.4.1.25506.2.75.8.4.1.1.6 hh3cdot11channelscopetype read-only
Represents the channel in which the device was last detected. AP will choose the channel which has maximum signal strength as effective channel, as there is interference between adjacent channels.
                 hh3cDot11MonitorRadioId 1.3.6.1.4.1.25506.2.75.8.4.1.1.7 hh3cdot11radioscopetype read-only
Represents the radio ID of the AP that detected the device.
                 hh3cDot11MonitorDevMaxRSSI 1.3.6.1.4.1.25506.2.75.8.4.1.1.8 integer32 read-only
Represents the maximum detected RSSI of the device in a scan report cycle.
                 hh3cDot11MonitorDevBeaconIntvl 1.3.6.1.4.1.25506.2.75.8.4.1.1.9 integer32 read-only
Represents the beacon interval for the detected device(not include the device which type is client).
                 hh3cDot11MonitorDevFstDctTime 1.3.6.1.4.1.25506.2.75.8.4.1.1.10 dateandtime read-only
Represents the time at which the device was first detected.
                 hh3cDot11MonitorDevLstDctTime 1.3.6.1.4.1.25506.2.75.8.4.1.1.11 dateandtime read-only
Represents the time at which the device was detected last time.
                 hh3cDot11MonitorDevClear 1.3.6.1.4.1.25506.2.75.8.4.1.1.12 truthvalue read-write
This object is used to clear the information of the device detected in the WLAN. It will return false for get operation.
                 hh3cDot11MonitorDevSNR 1.3.6.1.4.1.25506.2.75.8.4.1.1.13 integer32 read-only
Represents the SNR of the device in a scan report cycle.