HH3C-DOT11-APMT-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-DOT11-APMT-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, HH3C-DOT11-REF-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cDot11APMT 1.3.6.1.4.1.25506.2.75.2
This MIB provides AP information which includes AP current object information, AP statistic data. GLOSSARY IEEE 802.11 Standard to encourage interoperability among wireless networking equipment. Access point (AP) Transmitter/receiver (transceiver) device that commonly connects and transports data between a wireless network and a wired network. Access control (AC) To control and manage multi-APs, it will bridge wireless and wired network. Fat AP Applied in the home, SOHO and so on, and it could work independently without help from AC. Fit AP Applied in the enterprise environment, it will work under the control and management from AC. Control And Provisioning of Wireless Access Points Protocol The short name of protocol is CAPWAP. AC will control and manage AP by CAPWAP tunnel protocol defined by IETF. Also, a data tunnel will be set up between AC and AP. BSS IEEE 802.11 Basic Service Set (Radio Cell). The BSS of an AP comprises of the stations directly associating with the AP. Radio The chip set to receive and send wireless signal. Association The service used to establish access point or station mapping and enable STA invocation of the distribution system services. (Wireless clients attempt to connect to access points.) Basic Rate A data rate that is mandatory for client devices to support in order for them to achieve successful association.
     hh3cDot11APObjectGroup 1.3.6.1.4.1.25506.2.75.2.1
         hh3cDot11APObjectStatusTable 1.3.6.1.4.1.25506.2.75.2.1.1 no-access
The table will provide the general information about APs in different status.
             hh3cDot11APObjectStatusEntry 1.3.6.1.4.1.25506.2.75.2.1.1.1 no-access
Each entry contains the general information of an AP.
                 hh3cDot11APID 1.3.6.1.4.1.25506.2.75.2.1.1.1.1 hh3cdot11objectidtype no-access
To uniquely identify each AP, and relation-ship between hh3cDot11APID and AP device will be static.
                 hh3cDot11APIPAddress 1.3.6.1.4.1.25506.2.75.2.1.1.1.2 ipaddress read-only
Represents the IP address of an AP.
                 hh3cDot11APMacAddress 1.3.6.1.4.1.25506.2.75.2.1.1.1.3 macaddress read-only
Represents the MAC address of an AP.
                 hh3cDot11APOperationStatus 1.3.6.1.4.1.25506.2.75.2.1.1.1.4 integer read-only
Represents operational status of AP. The following values are supported: join - AP is joining to AC. joinConfirm - AC confirm whether permit AP to join. download - AP is downloading software from AC. config - AP and AC exchange configuration before AP - provide WLAN service. run - The WLAN service is ready. Enumeration: 'download': 3, 'config': 4, 'run': 5, 'joinConfirm': 2, 'join': 1.
                 hh3cDot11APTemplateNameOfAP 1.3.6.1.4.1.25506.2.75.2.1.1.1.5 octet string read-only
Represents the name of current AP template configured for AP.
                 hh3cDot11APReset 1.3.6.1.4.1.25506.2.75.2.1.1.1.6 truthvalue read-write
When read the value from the node 2: Represents the AP can not be reseted. 1: Represents the AP can be reseted. When write the value to the node 1: Represents reseting the AP. Other values are not supported
                 hh3cDot11APCpuUsage 1.3.6.1.4.1.25506.2.75.2.1.1.1.7 integer32 read-only
Represents the current CPU usage for AP.
                 hh3cDot11APConnectionType 1.3.6.1.4.1.25506.2.75.2.1.1.1.8 integer read-only
Represents the current connection type. Enumeration: 'notAvailable': 3, 'slave': 2, 'master': 1.
                 hh3cDot11APLastImgDownloadTime 1.3.6.1.4.1.25506.2.75.2.1.1.1.9 dateandtime read-only
Represents the time at which the device last downloaded image.
                 hh3cDot11APIPv6Address 1.3.6.1.4.1.25506.2.75.2.1.1.1.10 octet string read-only
Represents the IPv6 address of AP.
                 hh3cDot11APLastRegisterTime 1.3.6.1.4.1.25506.2.75.2.1.1.1.11 dateandtime read-only
Represents the time at which the device last registered with AC.
                 hh3cDot11APResetCM 1.3.6.1.4.1.25506.2.75.2.1.1.1.12 integer read-write
When reading the value from the node normal - Represents the AP cannot be reset. restart - Represents the AP can be reset. When writing the value to the node restart - Represents resetting the AP. Other values are not supported. Enumeration: 'restart': 1, 'normal': 0.
         hh3cDot11APObjectTable 1.3.6.1.4.1.25506.2.75.2.1.2 no-access
The table will provide information for APs in the running status.
             hh3cDot11APObjectEntry 1.3.6.1.4.1.25506.2.75.2.1.2.1 no-access
Each entry contains information of an AP in run status.
                 hh3cDot11APObjID 1.3.6.1.4.1.25506.2.75.2.1.2.1.1 hh3cdot11objectidtype no-access
To uniquely identify each AP, and relation-ship between hh3cDot11APObjID and AP device will be static.
                 hh3cDot11CurrAPIPAddress 1.3.6.1.4.1.25506.2.75.2.1.2.1.2 ipaddress read-only
Represents the IP address of an AP.
                 hh3cDot11CurrAPMacAddress 1.3.6.1.4.1.25506.2.75.2.1.2.1.3 macaddress read-only
Represents the MAC address of an AP.
                 hh3cDot11CurrACPortIndex 1.3.6.1.4.1.25506.2.75.2.1.2.1.4 integer32 read-only
Represents the port on the AC, by which the traffic of this AP comes through. NMS could refer it to access information kept in the MIB-2.
                 hh3cDot11CurrAPMACMode 1.3.6.1.4.1.25506.2.75.2.1.2.1.5 hh3cdot11macmodetype read-only
Represents what MAC mode defined in the CAPWAP is applied. For fat AP, the value will be fatap.
                 hh3cDot11CurrAPTemplateName 1.3.6.1.4.1.25506.2.75.2.1.2.1.6 octet string read-only
Represents the name of current AP template.
                 hh3cDot11CurrAPStationAssocCount 1.3.6.1.4.1.25506.2.75.2.1.2.1.7 integer32 read-only
Represents the total number of stations which are associating to AP.
                 hh3cDot11CurrAPName 1.3.6.1.4.1.25506.2.75.2.1.2.1.8 octet string read-only
Represents the name of AP.
                 hh3cDot11CurrAPModelName 1.3.6.1.4.1.25506.2.75.2.1.2.1.9 octet string read-only
Represents index of WTP model,with it to get AP model information.
                 hh3cDot11CurrAPImageName 1.3.6.1.4.1.25506.2.75.2.1.2.1.10 octet string read-only
Represents the image file name of AP.
                 hh3cDot11CurrAPSoftwareVersion 1.3.6.1.4.1.25506.2.75.2.1.2.1.11 octet string read-only
Represents the software version of AP.
                 hh3cDot11CurrAPIPNetMask 1.3.6.1.4.1.25506.2.75.2.1.2.1.12 ipaddress read-only
Represents the IP netmask of AP.
                 hh3cDot11CurrRadioModeSupport 1.3.6.1.4.1.25506.2.75.2.1.2.1.13 integer32 read-only
Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11n(8) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4).
                 hh3cDot11CurrIfNumber 1.3.6.1.4.1.25506.2.75.2.1.2.1.14 integer32 read-only
Represents number of interface of the AP.
                 hh3cDot11CurrAPElementID 1.3.6.1.4.1.25506.2.75.2.1.2.1.15 integer32 read-only
Represents the AP element ID.
                 hh3cDot11CurrAPMode 1.3.6.1.4.1.25506.2.75.2.1.2.1.16 integer read-only
Represents the forward mode of the AP. Enumeration: 'bridge': 1, 'route': 2.
                 hh3cDot11CurrAPIPv6Address 1.3.6.1.4.1.25506.2.75.2.1.2.1.17 octet string read-only
Represents the IPv6 address of AP.
                 hh3cDot11CurrAPSSIDNumber 1.3.6.1.4.1.25506.2.75.2.1.2.1.18 integer32 read-only
Represents the number of SSID configured on AP.
                 hh3cDot11CurrAPManufacturer 1.3.6.1.4.1.25506.2.75.2.1.2.1.19 octet string read-only
By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP.
                 hh3cDot11CurrAPMemorySize 1.3.6.1.4.1.25506.2.75.2.1.2.1.20 integer32 read-only
Represents the size of AP memory.
                 hh3cDot11CurrAPMemSizeInBytes 1.3.6.1.4.1.25506.2.75.2.1.2.1.21 integer32 read-only
Represents the size of AP memory.
                 hh3cDot11CurrAPFlashSize 1.3.6.1.4.1.25506.2.75.2.1.2.1.22 integer32 read-only
Represents the size of AP flash.
                 hh3cDot11CurrAPFlashSizeInBytes 1.3.6.1.4.1.25506.2.75.2.1.2.1.23 integer32 read-only
This object represents the size of AP flash.
                 hh3cDot11CurrAPReleasedVersion 1.3.6.1.4.1.25506.2.75.2.1.2.1.24 octet string read-only
Represents the released version of AP.
                 hh3cDot11CurrRadioModeSupport2 1.3.6.1.4.1.25506.2.75.2.1.2.1.25 integer32 read-only
Represents which radio type supported by the AP. The WLAN system support the following possible radio type. dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16) For a AP,it could support multiple radio types at the same time.So the value of object could combine multiple value of radio type above. For example: For one AP which support both b and g mode radio, when getting the value from the node, the value is 6(2 + 4).
                 hh3cDot11CurrAPCPUTypeCM 1.3.6.1.4.1.25506.2.75.2.1.2.1.26 octet string read-only
Represents the CPU type of AP.
                 hh3cDot11CurrAPMemoryTypeCM 1.3.6.1.4.1.25506.2.75.2.1.2.1.27 octet string read-only
Represents the memory card type of AP.
                 hh3cDot11CurrAPBSSIDNumberCM 1.3.6.1.4.1.25506.2.75.2.1.2.1.28 integer32 read-only
Represents the number of BSSID configured on AP.
         hh3cDot11APRadioTable 1.3.6.1.4.1.25506.2.75.2.1.3 no-access
The table will describe the radio information of AP. The AP here will be in running status.
             hh3cDot11APRadioEntry 1.3.6.1.4.1.25506.2.75.2.1.3.1 no-access
Each entry contains the information of each radio of a specific AP.
                 hh3cDot11CurAPID 1.3.6.1.4.1.25506.2.75.2.1.3.1.1 octet string no-access
To uniquely identify a AP in running status.
                 hh3cDot11RadioID 1.3.6.1.4.1.25506.2.75.2.1.3.1.2 integer32 no-access
Represents each radio.
                 hh3cDot11AdminStatus 1.3.6.1.4.1.25506.2.75.2.1.3.1.3 truthvalue read-only
Represents the administrator status of radio.
                 hh3cDot11OperStatus 1.3.6.1.4.1.25506.2.75.2.1.3.1.4 truthvalue read-only
Represents the operational status of radio.
                 hh3cDot11Channel 1.3.6.1.4.1.25506.2.75.2.1.3.1.5 hh3cdot11channelscopetype read-only
Represents the current channel allocation for radio.
                 hh3cDot11TxPowerLevel 1.3.6.1.4.1.25506.2.75.2.1.3.1.6 hh3cdot11txpwrlevelscopetype read-only
Represents the current transmit power level for radio.
                 hh3cDot11APRadioIfIndex 1.3.6.1.4.1.25506.2.75.2.1.3.1.7 integer32 read-only
Represents the interface index for the radio.
                 hh3cDot11AntennaGain 1.3.6.1.4.1.25506.2.75.2.1.3.1.8 integer32 read-only
Represents the current gain for antenna.
                 hh3cDot11MaxBandwidth 1.3.6.1.4.1.25506.2.75.2.1.3.1.9 integer32 read-only
Represents the maximum bandwidth for the radio.
                 hh3cDot11ResourceUseRatio 1.3.6.1.4.1.25506.2.75.2.1.3.1.10 integer32 read-only
Represents the ratio of radio resource usage.
                 hh3cDot11RadioModeSupport 1.3.6.1.4.1.25506.2.75.2.1.3.1.11 unsigned32 read-only
Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11gn(16), dot11an(32). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4).
                 hh3cDot11TxPowerLevel2 1.3.6.1.4.1.25506.2.75.2.1.3.1.12 integer32 read-only
The TxPowerLevel N currently being used to transmit data.
                 hh3cDot11PowerMgmtStatus 1.3.6.1.4.1.25506.2.75.2.1.3.1.13 truthvalue read-only
Represents status of power management of the radio.
                 hh3cDot11ChannelSwitchTimes 1.3.6.1.4.1.25506.2.75.2.1.3.1.14 counter32 read-only
Represents the channel switch times.
                 hh3cDot11AntennaType 1.3.6.1.4.1.25506.2.75.2.1.3.1.15 octet string read-only
Represents type of the antenna which radio used.
                 hh3cDot11DiversitySelectionRx 1.3.6.1.4.1.25506.2.75.2.1.3.1.16 truthvalue read-only
Represents the diversity selection received.
                 hh3cDot11MaxTxPwrLvl 1.3.6.1.4.1.25506.2.75.2.1.3.1.17 octet string read-only
Represents the maximum transmit power.
                 hh3cDot11PwrAttRange 1.3.6.1.4.1.25506.2.75.2.1.3.1.18 integer32 read-only
Represents the range of power attenuation.
                 hh3cDot11AvgRxSignalStrength 1.3.6.1.4.1.25506.2.75.2.1.3.1.19 integer32 read-only
Represents the average received signal strength.
                 hh3cDot11HighestRxSignalStrength 1.3.6.1.4.1.25506.2.75.2.1.3.1.20 integer32 read-only
Represents the highest received signal strength.
                 hh3cDot11LowestRxSignalStrength 1.3.6.1.4.1.25506.2.75.2.1.3.1.21 integer32 read-only
Represents the lowest received signal strength.
                 hh3cDot11RadioIfUpdownTimes 1.3.6.1.4.1.25506.2.75.2.1.3.1.22 counter32 read-only
Represents the up/down times on radio interface.
                 hh3cDot11RadioIfLastChange 1.3.6.1.4.1.25506.2.75.2.1.3.1.23 timeticks read-only
Represents time at last change that occurred on radio interface.
                 hh3cDot11RadioModeSupport2 1.3.6.1.4.1.25506.2.75.2.1.3.1.24 unsigned32 read-only
Represents radio type supported by the radio. The WLAN system supports the following possible radio type: dot11a(1), dot11b(2), dot11g(4), dot11an(8), dot11gn(16). For the radio, it could support multiple radio types at the same time. So the value of this object could combine multiple values of radio type above. For example: For one radio which supports both dot11b and dot11g mode, when get value from the object, the value is 5(1 + 4).
                 hh3cDot11OperStatusCM 1.3.6.1.4.1.25506.2.75.2.1.3.1.25 integer read-only
Represents the operational status of radio. Enumeration: 'down': 2, 'admindown': 4, 'testing': 3, 'up': 1.
         hh3cDot11APBSSTable 1.3.6.1.4.1.25506.2.75.2.1.4 no-access
After AP connect to AC and get AP template configuration, it will create BSS data structure for each radio. The table will describe BSS information of AP and service policy as per BSS.
             hh3cDot11APBSSEntry 1.3.6.1.4.1.25506.2.75.2.1.4.1 no-access
Each entry contains information of each BSS for specific radio.
                 hh3cDot11WlanID 1.3.6.1.4.1.25506.2.75.2.1.4.1.1 integer32 no-access
Represents ID of a specific ESS.
                 hh3cDot11BSSID 1.3.6.1.4.1.25506.2.75.2.1.4.1.2 macaddress read-only
As MAC Address format, it is to identify BSS.
                 hh3cDot11CurrSvcPolicyID 1.3.6.1.4.1.25506.2.75.2.1.4.1.3 hh3cdot11servicepolicyidtype read-only
Represents the ID of each service policy used by the AP.
                 hh3cDot11SSID 1.3.6.1.4.1.25506.2.75.2.1.4.1.4 octet string read-only
This object represents the SSID corresponding to this BSS.
                 hh3cDot11CurrSSIDResourceUseRatio 1.3.6.1.4.1.25506.2.75.2.1.4.1.5 integer32 read-only
Represents the ratio of resource usage of curr SSID
                 hh3cDot11APEssVlanId 1.3.6.1.4.1.25506.2.75.2.1.4.1.6 integer32 read-only
This object represents the VlanID of the interface ESS corresponding to this BSS.
         hh3cDot11APModelTable 1.3.6.1.4.1.25506.2.75.2.1.5 no-access
The table defines the capability information for a specific kind of AP.
             hh3cDot11APModelEntry 1.3.6.1.4.1.25506.2.75.2.1.5.1 no-access
Each entry contains capability information for a specific kind of AP.
                 hh3cDot11APModelAlias 1.3.6.1.4.1.25506.2.75.2.1.5.1.1 octet string no-access
Represents alias of AP model name.
                 hh3cDot11APModelName 1.3.6.1.4.1.25506.2.75.2.1.5.1.2 octet string read-only
Represents AP model name(like WA2100).
                 hh3cDot11RadioNumSupport 1.3.6.1.4.1.25506.2.75.2.1.5.1.3 hh3cdot11radioscopetype read-only
Represents how many radios the specific AP model could support.
                 hh3cDot11StationNumSupport 1.3.6.1.4.1.25506.2.75.2.1.5.1.4 integer32 read-only
Represents how many station could be supported by a specific AP model.
                 hh3cDot11MACModeSupport 1.3.6.1.4.1.25506.2.75.2.1.5.1.5 hh3cdot11macmodetype read-only
Represents the MAC mode type could be supported by a specific AP model.
                 hh3cDot11APManufacturer 1.3.6.1.4.1.25506.2.75.2.1.5.1.6 octet string read-only
By the 'SMI Network Management Private Enterprise Codes' assigned by the IANA, NMS could know which vendor manufactures the AP.
                 hh3cDot11APCPUType 1.3.6.1.4.1.25506.2.75.2.1.5.1.7 octet string read-only
Represents the CPU type of AP
                 hh3cDot11APCPUClockSpeed 1.3.6.1.4.1.25506.2.75.2.1.5.1.8 unsigned32 read-only
Represents the clock speed of CPU.
                 hh3cDot11APMemoryType 1.3.6.1.4.1.25506.2.75.2.1.5.1.9 octet string read-only
Represents the memory card type of AP
                 hh3cDot11APFlashType 1.3.6.1.4.1.25506.2.75.2.1.5.1.11 octet string read-only
Represents the flash card type of AP
                 hh3cDot11APFlashSize 1.3.6.1.4.1.25506.2.75.2.1.5.1.12 unsigned32 read-only
Represents the size of AP flash card.
                 hh3cDot11APMemSize 1.3.6.1.4.1.25506.2.75.2.1.5.1.13 gauge32 read-only
Represents the size of AP memory card.
                 hh3cDot11APFlashSizeInBytes 1.3.6.1.4.1.25506.2.75.2.1.5.1.14 unsigned32 read-only
This object represents the size of AP flash card in bytes.
                 hh3cDot11APMemorySize 1.3.6.1.4.1.25506.2.75.2.1.5.1.20 unsigned32 read-only
Represents the size of AP memory card.
         hh3cDot11APIfTable 1.3.6.1.4.1.25506.2.75.2.1.6 no-access
This table represents the AP interface informations.
             hh3cDot11APIfEntry 1.3.6.1.4.1.25506.2.75.2.1.6.1 no-access
Each entry of the table will provide data for the interface of AP.
                 hh3cDot11APIfIndex 1.3.6.1.4.1.25506.2.75.2.1.6.1.1 integer32 no-access
Represents the index for a interface.
                 hh3cDot11APIfDescr 1.3.6.1.4.1.25506.2.75.2.1.6.1.2 octet string read-only
Represents the interface description for a interface.
                 hh3cDot11APIfType 1.3.6.1.4.1.25506.2.75.2.1.6.1.3 integer32 read-only
Represents the interface type for a interface.
                 hh3cDot11APIfMtu 1.3.6.1.4.1.25506.2.75.2.1.6.1.4 integer32 read-write
Represents size of the largest datagram which can be sent/received on the interface, specified in octets.
                 hh3cDot11APIfPHYAddress 1.3.6.1.4.1.25506.2.75.2.1.6.1.5 octet string read-only
Represents the PHY address of interface.
                 hh3cDot11APIfSpeed 1.3.6.1.4.1.25506.2.75.2.1.6.1.6 integer32 read-only
Represents maximum bandwidth of this interface.
                 hh3cDot11APIfInDataRate 1.3.6.1.4.1.25506.2.75.2.1.6.1.7 integer32 read-only
Represents the average input data rate of this interface in latest 300 seconds.
                 hh3cDot11APIfOutDataRate 1.3.6.1.4.1.25506.2.75.2.1.6.1.8 integer32 read-only
Represents the average output data rate of this interface in latest 300 seconds.
                 hh3cDot11APIfSpeedKbps 1.3.6.1.4.1.25506.2.75.2.1.6.1.9 gauge32 read-only
Represents maximum bandwidth of this interface.
                 hh3cDot11APIfTypeCM 1.3.6.1.4.1.25506.2.75.2.1.6.1.10 integer32 read-only
Represents the interface type.
         hh3cDot11APSSIDObjectTable 1.3.6.1.4.1.25506.2.75.2.1.7 no-access
This table provides BSSID number configuration information based on SSID.
             hh3cDot11APSSIDObjectEntry 1.3.6.1.4.1.25506.2.75.2.1.7.1 no-access
Each entry provides BSSID number configuration information of a SSID.
                 hh3cDot11APConfigSPID 1.3.6.1.4.1.25506.2.75.2.1.7.1.1 hh3cdot11servicepolicyidtype no-access
Represents the service policy ID.
                 hh3cDot11APConfigSSIDName 1.3.6.1.4.1.25506.2.75.2.1.7.1.2 hh3cdot11ssidstringtype read-only
Represents the SSID name of this service policy.
                 hh3cDot11APConfigBSSIDNum 1.3.6.1.4.1.25506.2.75.2.1.7.1.3 integer32 read-only
Represents the number of BSSID that be configured with current SSID.
                 hh3cDot11APConfigPortalStaNum 1.3.6.1.4.1.25506.2.75.2.1.7.1.4 integer32 read-only
Represents the total number of associated protal stations with current SSID.
         hh3cDot11APSysInfoTable 1.3.6.1.4.1.25506.2.75.2.1.8 no-access
The table provides the system information of the AP.
             hh3cDot11APSysInfoEntry 1.3.6.1.4.1.25506.2.75.2.1.8.1 no-access
Each entry provides system information of an AP.
                 hh3cDot11APSysUpTime 1.3.6.1.4.1.25506.2.75.2.1.8.1.1 timeticks read-only
Represents how long AP has been powered on.
                 hh3cDot11APCPURTUsage 1.3.6.1.4.1.25506.2.75.2.1.8.1.2 integer32 read-only
Represents the CPU real time usage for AP.
                 hh3cDot11APCPUAvgUsage 1.3.6.1.4.1.25506.2.75.2.1.8.1.3 integer32 read-only
Represents the CPU average usage for AP.
                 hh3cDot11APMemRTUsage 1.3.6.1.4.1.25506.2.75.2.1.8.1.4 integer32 read-only
Represents the memory real time usage for AP.
                 hh3cDot11APMemAvgUsage 1.3.6.1.4.1.25506.2.75.2.1.8.1.5 integer32 read-only
Represents the average memory usage for AP.
                 hh3cDot11APIPAddressGateway 1.3.6.1.4.1.25506.2.75.2.1.8.1.6 ipaddress read-only
Represents the IP address gateway for AP.
                 hh3cDot11APACAssociateStatus 1.3.6.1.4.1.25506.2.75.2.1.8.1.7 integer read-only
Represents associate status of AP and AC. Enumeration: 'downloadingImage': 3, 'associated': 1, 'deassociated': 2.
                 hh3cDot11APManuBuildInfo 1.3.6.1.4.1.25506.2.75.2.1.8.1.8 octet string read-only
Represents the device version information for AP.
                 hh3cDot11APFlashFreeSize 1.3.6.1.4.1.25506.2.75.2.1.8.1.9 unsigned32 read-only
Represents the free size of AP flash card.
                 hh3cDot11APTemperature 1.3.6.1.4.1.25506.2.75.2.1.8.1.10 integer32 read-only
Represents the device temperature information for AP.
         hh3cDot11APIdleListTable 1.3.6.1.4.1.25506.2.75.2.1.9 no-access
This table provides the list of idle AP.
             hh3cDot11APIdleListEntry 1.3.6.1.4.1.25506.2.75.2.1.9.1 no-access
Each entry provides information of a idle AP.
                 hh3cDot11APIdleTemplateName 1.3.6.1.4.1.25506.2.75.2.1.9.1.1 octet string no-access
Represents the name of idle AP template.
                 hh3cDot11APIdleSerialID 1.3.6.1.4.1.25506.2.75.2.1.9.1.2 octet string read-only
Represents AP serial ID.
         hh3cDot11APSysInfoByAPIDTable 1.3.6.1.4.1.25506.2.75.2.1.10 no-access
The table provides the system information of the AP.
               hh3cDot11APSysInfoByAPIDEntry 1.3.6.1.4.1.25506.2.75.2.1.10.1 no-access
Each entry provides system information of an AP.
                   hh3cDot11APSysUpTime2 1.3.6.1.4.1.25506.2.75.2.1.10.1.1 timeticks read-only
Represents how long AP has been powered on.
                   hh3cDot11APCPURTUsage2 1.3.6.1.4.1.25506.2.75.2.1.10.1.2 integer32 read-only
Represents the CPU real time usage for AP.
                   hh3cDot11APCPUAvgUsage2 1.3.6.1.4.1.25506.2.75.2.1.10.1.3 integer32 read-only
Represents the CPU average usage for AP.
                   hh3cDot11APMemRTUsage2 1.3.6.1.4.1.25506.2.75.2.1.10.1.4 integer32 read-only
Represents the memory real time usage for AP.
                   hh3cDot11APMemAvgUsage2 1.3.6.1.4.1.25506.2.75.2.1.10.1.5 integer32 read-only
Represents the average memory usage for AP.
                   hh3cDot11APIPAddressGateway2 1.3.6.1.4.1.25506.2.75.2.1.10.1.6 ipaddress read-only
Represents the IP address gateway for AP.
                   hh3cDot11APACAssociateStatus2 1.3.6.1.4.1.25506.2.75.2.1.10.1.7 integer read-only
Represents associate status of AP and AC. Enumeration: 'downloadingImage': 3, 'associated': 1, 'deassociated': 2.
                   hh3cDot11APManuBuildInfo2 1.3.6.1.4.1.25506.2.75.2.1.10.1.8 octet string read-only
Represents the device version information for AP.
                   hh3cDot11APFlashFreeSize2 1.3.6.1.4.1.25506.2.75.2.1.10.1.9 unsigned32 read-only
Represents the free size of AP flash card.
                   hh3cDot11APTemperature2 1.3.6.1.4.1.25506.2.75.2.1.10.1.10 integer32 read-only
Represents the device temperature information for AP.
                   hh3cDot11APMacAddress2 1.3.6.1.4.1.25506.2.75.2.1.10.1.11 macaddress read-only
Represents the MAC address of AP.
                   hh3cDot11APACAssociateStatusCM 1.3.6.1.4.1.25506.2.75.2.1.10.1.12 integer read-only
Represents associate status of AP and AC. Enumeration: 'associated': 1, 'deassociated': 0.
     hh3cDot11APStatisGroup 1.3.6.1.4.1.25506.2.75.2.2
         hh3cDot11APRxStatisTable 1.3.6.1.4.1.25506.2.75.2.2.1 no-access
The table will provide the receiving statistic for a specific radio of AP.
             hh3cDot11APRxStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.1.1 no-access
Each entry of the table will provide the statistic data for each radio of a specific AP.
                 hh3cDot11RxFrameDupCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.1 counter32 read-only
Represents the number of duplicate frames reception.
                 hh3cDot11RxFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.2 counter32 read-only
Represents the number of frames reception.
                 hh3cDot11RxUcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.3 counter32 read-only
Represents the number of unicast frames reception.
                 hh3cDot11RxBcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.4 counter32 read-only
Represents the number of broadcast frames reception.
                 hh3cDot11RxMcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.5 counter32 read-only
Represents the number of multicast frames reception.
                 hh3cDot11RxDiscardFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.6 counter32 read-only
Represents the number of frames discarded by AP.
                 hh3cDot11RxFragCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.7 counter32 read-only
Represents the number of frame fragments reception.
                 hh3cDot11RxFcsErrCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.8 counter32 read-only
Represents the number of FCS error frames reception.
                 hh3cDot11RxFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.9 counter32 read-only
Represents the bytes of frames reception.
                 hh3cDot11RxUcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.10 counter32 read-only
Represents the bytes of unicast frames reception.
                 hh3cDot11RxBcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.11 counter32 read-only
Represents the bytes of broadcast frames reception.
                 hh3cDot11RxMcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.12 counter32 read-only
Represents the bytes of multicast frames reception.
                 hh3cDot11RxDiscardFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.13 counter32 read-only
Represents the bytes of frames discarded by AP.
                 hh3cDot11RxMgmtFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.14 counter32 read-only
Represents the number of management frames reception.
                 hh3cDot11RxCtrlFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.15 counter32 read-only
Represents the number of control frames reception.
                 hh3cDot11RxDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.16 counter32 read-only
Represents the number of data frames reception.
                 hh3cDot11RxDecryptErrorCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.17 counter32 read-only
Represents the number of decryption error.
                 hh3cDot11RxAuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.18 counter32 read-only
Represents the number of authentication frame reception.
                 hh3cDot11RxAssociateFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.19 counter32 read-only
Represents the number of associate frame reception.
                 hh3cDot11RxFrameErrorRatio 1.3.6.1.4.1.25506.2.75.2.2.1.1.20 integer32 read-only
Represents the ratio of error frame.
                 hh3cDot11RxPhyErrorCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.21 counter32 read-only
Represents the number of physical reception error.
                 hh3cDot11RxMICErrorCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.22 counter32 read-only
Represents the number of MIC verification error.
                 hh3cDot11RxDataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.23 counter32 read-only
Represents the bytes of data frames reception.
                 hh3cDot11RadioRxAverSnr 1.3.6.1.4.1.25506.2.75.2.2.1.1.24 integer32 read-only
Represents the average signal noise rate of this radio.
                 hh3cDot11RxPayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.1.1.25 counter32 read-only
Represents the payload bytes of data frames reception.
                 hh3cDot11RxTrafficSpeed 1.3.6.1.4.1.25506.2.75.2.2.1.1.26 integer32 read-only
Represents the bytes of frames reception per second.
                 hh3cDot11RxUcastDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.27 counter64 read-only
Represents the number of unicast data frames reception.
                 hh3cDot11RxNUcastDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.28 counter64 read-only
Represents the number of non-unicast data frames reception.
                 hh3cDot11RxTotalDiscardFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.29 counter64 read-only
Represents the number of total frames discarded by radio.
                 hh3cDot11RxTotalIPCheckErrPacketCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.30 counter64 read-only
Represents the total number of IP checksum error packets received through the current radio.
                 hh3cDot11RxSignalStrengthPacketCntCM 1.3.6.1.4.1.25506.2.75.2.2.1.1.31 octet string read-only
Represents the count of received packets according to signal strength.
                 hh3cDot11RxDataFrameCntCM 1.3.6.1.4.1.25506.2.75.2.2.1.1.32 counter32 read-only
Represents the number of received data frames, excluding retransmitted frames.
                 hh3cDot11RxTotalFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.1.1.33 counter64 read-only
Represents the total number of packets received through the current radio.
         hh3cDot11APTxStatisTable 1.3.6.1.4.1.25506.2.75.2.2.2 no-access
The table will provide the transmission statistic for a specific radio of AP.
             hh3cDot11APTxStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.2.1 no-access
Each entry of the table will provide the statistic data for each radio of a specific AP.
                 hh3cDot11TxFragCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.1 counter32 read-only
Represents the number of fragmented frames transmission.
                 hh3cDot11FailedCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.2 counter32 read-only
Represents the number of transmission failures.
                 hh3cDot11RetryCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.3 counter32 read-only
Represents the number of transmit retries.
                 hh3cDot11MultiRetryCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.4 counter32 read-only
Represents the number of transmits that required more than one retry.
                 hh3cDot11RtsSuccessCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.5 counter32 read-only
Represents the number of successful RTS (Request to send) transmission.
                 hh3cDot11RtsFailCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.6 counter32 read-only
Represents the number of RTS transmission failures.
                 hh3cDot11AckFailCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.7 counter32 read-only
Represents the number of acknowledgement failures.
                 hh3cDot11TxFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.8 counter32 read-only
Represents the total number of frames transmission.
                 hh3cDot11TxUcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.9 counter32 read-only
Represents the number of unicast frames transmission.
                 hh3cDot11TxBcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.10 counter32 read-only
Represents the number of broadcast frames transmission.
                 hh3cDot11TxMcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.11 counter32 read-only
Represents the number of multicast frames transmission.
                 hh3cDot11TxDiscardFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.12 counter32 read-only
Represents the number of frames discarded by AP.
                 hh3cDot11TxFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.13 counter32 read-only
Represents the total bytes of frames transmission.
                 hh3cDot11TxUcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.14 counter32 read-only
Represents the bytes of unicast frames transmission.
                 hh3cDot11TxBcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.15 counter32 read-only
Represents the bytes of broadcast frames transmission.
                 hh3cDot11TxMcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.16 counter32 read-only
Represents the bytes of multicast frames transmission.
                 hh3cDot11TxDiscardFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.17 counter32 read-only
Represents the bytes of multicast frames transmission.
                 hh3cDot11TxAuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.18 counter32 read-only
Represents the number of authentication frame transmission.
                 hh3cDot11TxAssociateFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.19 counter32 read-only
Represents the number of associate frame transmission.
                 hh3cDot11TxFrameRetryRatio 1.3.6.1.4.1.25506.2.75.2.2.2.1.20 integer32 read-only
Represents the ratio of retry frame.
                 hh3cDot11TxDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.21 counter32 read-only
Represents the number of data frame transmission.
                 hh3cDot11TxDataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.22 counter32 read-only
Represents the bytes of data frame transmission.
                 hh3cDot11TxMSDUCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.23 counter32 read-only
Represents the total number of MSDU transmission.
                 hh3cDot11TxDiscardMSDUCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.24 counter32 read-only
Represents the number of discarded MSDU transmission.
                 hh3cDot11RetryMSDUCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.25 counter32 read-only
Represents the number of retransfer MSDU.
                 hh3cDot11TxPayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.2.1.26 counter32 read-only
Represents the payload bytes of data frames transmission.
                 hh3cDot11TxTrafficSpeed 1.3.6.1.4.1.25506.2.75.2.2.2.1.27 integer32 read-only
Represents the bytes of frames transmission per second.
                 hh3cDot11TxErrFrameRatio 1.3.6.1.4.1.25506.2.75.2.2.2.1.28 integer32 read-only
Represents the ratio of error frame.
                 hh3cDot11TxFrameRate 1.3.6.1.4.1.25506.2.75.2.2.2.1.29 integer32 read-only
Represents the count of frames transmission per second.
                 hh3cDot11TxMgtFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.30 counter32 read-only
Represents the number of transmitted management frames.
                 hh3cDot11TxCtrlFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.31 counter32 read-only
Represents the number of transmission control frames.
                 hh3cDot11TxMACErrCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.32 counter32 read-only
Represents the count of MAC error frame.
                 hh3cDot11TxErrFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.33 counter32 read-only
Represents the count of error frame.
                 hh3cDot11TxUcastDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.34 counter64 read-only
Represents the number of unicast data frames transmission.
                 hh3cDot11TxNUcastDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.35 counter64 read-only
Represents the number of non-unicast data frames transmission.
                 hh3cDot11TxTotalFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.2.1.36 counter64 read-only
Represents the number of total frames transmission.
         hh3cDot11APAssocStatisTable 1.3.6.1.4.1.25506.2.75.2.2.3 no-access
The table will provide the station association statistic for AP.
             hh3cDot11APAssocStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.3.1 no-access
Each entry of the table will provide the statistic data of station association for AP.
                 hh3cDot11ApStationAssocSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.1 counter32 read-only
Represents the total number of station association with this AP.
                 hh3cDot11ApStationAssocFailSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.2 counter32 read-only
Represents the total number of station association failure with this AP.
                 hh3cDot11ApStationReassocSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.3 counter32 read-only
Represents the total number of station reassociation with this AP.
                 hh3cDot11ApStationAssocRejectSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.4 counter32 read-only
Represents the total number of station association rejected on account of resource limit with this AP.
                 hh3cDot11ApStationExDeAuthenSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.5 counter32 read-only
Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this AP.
                 hh3cDot11ApStationCurAssocSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.6 integer32 read-only
Represents the total number of current associated stations with this AP.
                 hh3cDot11ApStaCurAuthSuccSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.7 integer32 read-only
Represents the successful number of station authentication with this AP.
                 hh3cDot11AllStationUpSumTime 1.3.6.1.4.1.25506.2.75.2.2.3.1.8 counter32 read-only
Represents the sum of duration of all stations which associate with this AP.
                 hh3cDot11ApStationAssocReqSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.9 counter32 read-only
Represents the number of station association request with this AP.
                 hh3cDot11AllStationUpSumTimeTicks 1.3.6.1.4.1.25506.2.75.2.2.3.1.10 timeticks read-only
Represents the sum of duration of all stations which associate with this AP.
                 hh3cDot11ApStationReassocReqSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.11 counter32 read-only
Represents the total number of station reassociation request with this AP.
                 hh3cDot11ApStationReassocFailSum 1.3.6.1.4.1.25506.2.75.2.2.3.1.12 counter32 read-only
Represents the total number of station reassociation failure with this AP.
         hh3cDot11BSSRxStatisTable 1.3.6.1.4.1.25506.2.75.2.2.4 no-access
The table will provide the reception statistic for a specific BSS on a radio.
             hh3cDot11BSSRxStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.4.1 no-access
Each entry of the table will provide the statistic data for each BSS on a specific radio.
                 hh3cDot11BSSRxFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.4.1.1 counter32 read-only
Represents the number of frames reception with this BSS.
                 hh3cDot11BSSRxFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.4.1.2 counter32 read-only
Represents the bytes of frames reception with this BSS.
                 hh3cDot11BSSRxDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.4.1.3 counter32 read-only
Represents the number of data frames reception with this BSS.
                 hh3cDot11BSSRxDataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.4.1.4 counter32 read-only
Represents the bytes of data frames reception with this BSS.
                 hh3cDot11BSSRxAssociateFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.4.1.5 counter32 read-only
Represents the number of associate frames reception with this BSS.
                 hh3cDot11BSSRxFrameErrorRatio 1.3.6.1.4.1.25506.2.75.2.2.4.1.6 integer32 read-only
Represents the ratio of error frames reception with this BSS.
                 hh3cDot11BSSRxPayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.4.1.7 counter32 read-only
Represents the payload bytes of data frames reception with this BSS.
                 hh3cDot11BSSRxUniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.4.1.8 counter32 read-only
Represents the count of unicast frames received.
                 hh3cDot11BSSRxNonUniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.4.1.9 integer32 read-only
Represents the count of non-unicast frames received.
                 hh3cDot11BSSRxAuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.4.1.10 counter32 read-only
Represents the count of authentication frames received.
         hh3cDot11BSSTxStatisTable 1.3.6.1.4.1.25506.2.75.2.2.5 no-access
The table will provide the transmission statistic for a specific BSS on a radio.
             hh3cDot11BSSTxStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.5.1 no-access
Each entry of the table will provide the statistic data for each BSS on a specific radio.
                 hh3cDot11BSSTxFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.1 counter32 read-only
Represents the total number of frames transmission with this BSS.
                 hh3cDot11BSSTxFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.5.1.2 counter32 read-only
Represents the total number of bytes transmission with this BSS.
                 hh3cDot11BSSTxDataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.3 counter32 read-only
Represents the number of data frame transmission with this BSS.
                 hh3cDot11BSSTxDataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.5.1.4 counter32 read-only
Represents the bytes of data frame transmission with this BSS.
                 hh3cDot11BSSTxAssociateFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.5 counter32 read-only
Represents the number of associate frame transmission with this BSS.
                 hh3cDot11BSSTxPayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.5.1.6 counter32 read-only
Represents the payload bytes of data frame transmission with this BSS.
                 hh3cDot11BSSTxRetryCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.7 counter32 read-only
Represents the count of bytes retransmitted with this BSS.
                 hh3cDot11BSSTxUniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.8 counter32 read-only
Represents the count of unicast frames transmission with this BSS.
                 hh3cDot11BSSTxNonUniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.9 integer32 read-only
Represents the number of non-unicast frames transmission with this BSS.
                 hh3cDot11BSSTxAuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.5.1.10 counter32 read-only
Represents the count of authentication frames transmission with this BSS.
         hh3cDot11BSSAssocStatisTable 1.3.6.1.4.1.25506.2.75.2.2.6 no-access
The table will provide the station association statistic for BSS.
             hh3cDot11BSSAssocStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.6.1 no-access
Each entry of the table will provide the statistic data of station association for BSS.
                 hh3cDot11BSSStationAssocSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.1 counter32 read-only
Represents the total number of station association with this BSS.
                 hh3cDot11BSSStationAssocFailSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.2 counter32 read-only
Represents the total number of station association failure with this BSS.
                 hh3cDot11BSSStationReassocSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.3 counter32 read-only
Represents the total number of station reassociation with this BSS.
                 hh3cDot11BSSStationAssocRejectSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.4 counter32 read-only
Represents the total number of station association rejected on account of resource limit with this BSS.
                 hh3cDot11BSSStationExDeAssocSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.5 counter32 read-only
Represents the total number of exceptional station deauthentication (Without sending a deauthentication to AP) with this BSS.
                 hh3cDot11BSSStationCurAssocSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.6 integer32 read-only
Represents the total number of current associated stations with this BSS.
                 hh3cDot11BSSStationAssocReqSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.7 counter32 read-only
Represents the total number of station association request with this BSS.
                 hh3cDot11BSSStationCurAuthSum 1.3.6.1.4.1.25506.2.75.2.2.6.1.8 integer32 read-only
Represents the total number of current associated stations which have passed portal or 1x authentication with this BSS.
         hh3cDot11APLinkStatisTable 1.3.6.1.4.1.25506.2.75.2.2.7 no-access
The table will provide the link statistic for AP.
             hh3cDot11APLinkStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.7.1 no-access
Each entry provides the link statistic of the AP.
                 hh3cDot11UpLinkUpDownTimes 1.3.6.1.4.1.25506.2.75.2.2.7.1.1 counter32 read-only
Represents up/down times of uplink interface of the AP.
                 hh3cDot11DownLinkUpDownTimes 1.3.6.1.4.1.25506.2.75.2.2.7.1.2 counter32 read-only
Represents up/down times of downlink interface of the AP.
                 hh3cDot11PrivateSrvRxFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.7.1.3 counter64 read-only
Traffic bytes received from private services.
                 hh3cDot11PrivateSrvTxFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.7.1.4 counter64 read-only
Traffic bytes sent to private services.
                 hh3cDot11APInternetAllRxBytes 1.3.6.1.4.1.25506.2.75.2.2.7.1.5 counter64 read-only
Internet traffic bytes received from stations.
                 hh3cDot11APInternetAllTxBytes 1.3.6.1.4.1.25506.2.75.2.2.7.1.6 counter64 read-only
Internet traffic bytes sent to stations.
                 hh3cDot11APLocalAllRxBytes 1.3.6.1.4.1.25506.2.75.2.2.7.1.7 counter64 read-only
Local traffic bytes received from stations.
                 hh3cDot11APLocalAllTxBytes 1.3.6.1.4.1.25506.2.75.2.2.7.1.8 counter64 read-only
Local traffic bytes sent to stations.
         hh3cDot11RadioAssocStatisTable 1.3.6.1.4.1.25506.2.75.2.2.8 no-access
The table will provide the station association statistic for radio.
             hh3cDot11RadioAssocStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.8.1 no-access
Each entry of the table will provide the statistic data of station association for radio.
                 hh3cDot11RadioStaAssocSum 1.3.6.1.4.1.25506.2.75.2.2.8.1.1 counter32 read-only
Represents the total number of station association with this radio.
                 hh3cDot11RadioStaAssocFailSum 1.3.6.1.4.1.25506.2.75.2.2.8.1.2 counter32 read-only
Represents the total number of station association failure with this radio.
                 hh3cDot11RadioStaReassocSum 1.3.6.1.4.1.25506.2.75.2.2.8.1.3 counter32 read-only
Represents the total number of station re-association with this radio.
                 hh3cDot11RadioStaAssocRejectSum 1.3.6.1.4.1.25506.2.75.2.2.8.1.4 counter32 read-only
Represents the total number of station association rejected on account of resource limit with this radio.
                 hh3cDot11RadioStaExDeAssocSum 1.3.6.1.4.1.25506.2.75.2.2.8.1.5 counter32 read-only
Represents the total number of exceptional station de-authentication (Without sending a de-authentication to AP) with this radio.
                 hh3cDot11RadioStaCurAssocSum 1.3.6.1.4.1.25506.2.75.2.2.8.1.6 integer32 read-only
Represents the total number of current associated stations with this radio.
         hh3cDot11RadioMngFrameStatisTable 1.3.6.1.4.1.25506.2.75.2.2.9 no-access
The table will provide the management frame statistic for this radio.
             hh3cDot11RadioMngFrameStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.9.1 no-access
Each entry of the table will provide the management frame statistic for this radio.
                 hh3cDot11RadioStatisIndex 1.3.6.1.4.1.25506.2.75.2.2.9.1.1 hh3cdot11radioelementindex no-access
Represents index of radio.
                 hh3cDot11MngFrameType 1.3.6.1.4.1.25506.2.75.2.2.9.1.2 integer no-access
Represents the type of the management frame on this radio. Enumeration: 'probeResp': 6, 'assocReq': 1, 'reassocResp': 4, 'atim': 8, 'beacon': 7, 'deauthentication': 11, 'disassociation': 9, 'action': 12, 'assocResp': 2, 'reassocReq': 3, 'probeReq': 5, 'authentication': 10.
                 hh3cDot11MngFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.9.1.3 counter32 read-only
Represents the total number of each type for management frame on this radio.
         hh3cDot11APAuthFailStatisTable 1.3.6.1.4.1.25506.2.75.2.2.10 no-access
The table will provide the authentication failure statistic for this AP.
               hh3cDot11APAuthFailStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.10.1 no-access
Each entry of the table will provide the authentication failure statistic for this AP.
                   hh3cDot11APAuthFailStatisType 1.3.6.1.4.1.25506.2.75.2.2.10.1.1 integer no-access
Represents the type of authentication failure with this AP. Enumeration: 'overtime': 2, 'other': 4, 'invalidation': 1, 'rejected': 3.
                   hh3cDot11APAuthFailStatisCnt 1.3.6.1.4.1.25506.2.75.2.2.10.1.2 counter32 read-only
Represents the total number of each type for authentication failure on this AP.
         hh3cDot11APAssocFailStatisTable 1.3.6.1.4.1.25506.2.75.2.2.11 no-access
The table will provide the association failure statistic for this AP.
               hh3cDot11APAssocFailStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.11.1 no-access
Each entry of the table will provide the association failure statistic for this AP.
                   hh3cDot11APAssocFailStatisType 1.3.6.1.4.1.25506.2.75.2.2.11.1.1 integer no-access
Represents the type of association failure with this AP. Enumeration: 'overtime': 2, 'other': 4, 'invalidation': 1, 'rejected': 3.
                   hh3cDot11APAssocFailStatisCnt 1.3.6.1.4.1.25506.2.75.2.2.11.1.2 counter32 read-only
Represents the total number of each type for association failure on this AP.
         hh3cDot11APReassocStatisTable 1.3.6.1.4.1.25506.2.75.2.2.12 no-access
The table will provide the re-association statistic for this AP.
               hh3cDot11APReassocStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.12.1 no-access
Each entry of the table will provide the re-association statistic for this AP.
                   hh3cDot11APReassocStatisType 1.3.6.1.4.1.25506.2.75.2.2.12.1.1 integer no-access
Represents the type of re-association with this AP. Enumeration: 'success': 2, 'invalidation': 3, 'rejected': 5, 'overtime': 4, 'other': 6, 'total': 1.
                   hh3cDot11APReassocStatisCnt 1.3.6.1.4.1.25506.2.75.2.2.12.1.2 counter32 read-only
Represents the total number of each type for re-association with this AP.
         hh3cDot11APUserAuthStatisTable 1.3.6.1.4.1.25506.2.75.2.2.13 no-access
The table will provide the user authentication statistic for this AP.
               hh3cDot11APUserAuthStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.13.1 no-access
Each entry of the table will provide the user authentication statistic for this AP.
                   hh3cDot11UserAuthStatisType 1.3.6.1.4.1.25506.2.75.2.2.13.1.1 integer no-access
Represents the type of user authentication with this AP. Enumeration: 'success': 2, 'invalidation': 4, 'keyError': 3, 'rejected': 6, 'overtime': 5, 'other': 7, 'total': 1.
                   hh3cDot11UserAuthStatisCnt 1.3.6.1.4.1.25506.2.75.2.2.13.1.2 counter32 read-only
Represents the total number of each type for user authentication with this AP.
         hh3cDot11APDeauthStatisTable 1.3.6.1.4.1.25506.2.75.2.2.14 no-access
The table will provide the de-authentication statistic for this AP.
               hh3cDot11APDeauthStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.14.1 no-access
Each entry of the table will provide the de-authentication statistic for this AP.
                   hh3cDot11APDeauthStatisType 1.3.6.1.4.1.25506.2.75.2.2.14.1.1 integer no-access
Represents the type of de-authentication for this AP. Enumeration: 'shortResource': 3, 'other': 5, 'stationLeaving': 2, 'total': 1, 'exception': 4.
                   hh3cDot11APDeauthStatisCnt 1.3.6.1.4.1.25506.2.75.2.2.14.1.2 counter32 read-only
Represents the total number of each type for de-authentication with this AP.
         hh3cDot11APDeassocStatisTable 1.3.6.1.4.1.25506.2.75.2.2.15 no-access
The table will provide the de-association statistic for this AP.
               hh3cDot11APDeassocStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.15.1 no-access
Each entry of the table will provide the de-association statistic for this AP.
                   hh3cDot11APDeassocStatisType 1.3.6.1.4.1.25506.2.75.2.2.15.1.1 integer no-access
Represents the type of de-association with this AP. Enumeration: 'shortResource': 3, 'other': 5, 'stationLeaving': 2, 'total': 1, 'exception': 4.
                   hh3cDot11APDeassocStatisCnt 1.3.6.1.4.1.25506.2.75.2.2.15.1.2 counter32 read-only
Represents the total number of each type for de-association with this AP.
         hh3cDot11APAssocFailStatis2Table 1.3.6.1.4.1.25506.2.75.2.2.16 no-access
This table will provide statistic of association fails for each ap.
               hh3cDot11APAssocFailStatis2Entry 1.3.6.1.4.1.25506.2.75.2.2.16.1 no-access
Each entry will provide statistic of association fails for this ap.
                   hh3cDot11APAssocFailStatis2Type 1.3.6.1.4.1.25506.2.75.2.2.16.1.1 integer no-access
Represents the type of association fails for this AP Enumeration: 'unknownReasonCode': 3, 'notSupportRateSet': 2, 'shortResource': 1, 'other': 4, 'rssiLowness': 5.
                   hh3cDot11APAssocFailStatis2Cnt 1.3.6.1.4.1.25506.2.75.2.2.16.1.2 counter32 read-only
Represents the total count of association fails for this AP.
         hh3cDot11APIfStatisTable 1.3.6.1.4.1.25506.2.75.2.2.17 no-access
The table will provide the statistics on the interface of the AP.
               hh3cDot11APIfStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.17.1 no-access
Each entry of the table will provide statistics on the interface of the AP.
                   hh3cDot11APIfInPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.1 counter32 read-only
Represents the total number of packets received on the interface.
                   hh3cDot11APIfInNormalPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.2 counter32 read-only
Represents the total number of correct packets received on the interface.
                   hh3cDot11APIfInErrorPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.3 counter32 read-only
Represents the total number of error packets received on the interface.
                   hh3cDot11APIfOutPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.4 counter32 read-only
Represents the total number of packets sent from the interface.
                   hh3cDot11APIfInOctets 1.3.6.1.4.1.25506.2.75.2.2.17.1.5 counter32 read-only
Represents the total number of octets received on the interface.
                   hh3cDot11APIfOutOctets 1.3.6.1.4.1.25506.2.75.2.2.17.1.6 counter32 read-only
Represents the total number of octets sent from the interface.
                   hh3cDot11APIfFlowOut 1.3.6.1.4.1.25506.2.75.2.2.17.1.7 unsigned32 read-only
Represents the traffic rate (byte/s) on the uplink interface during a sampling period.
                   hh3cDot11APIfFlowIN 1.3.6.1.4.1.25506.2.75.2.2.17.1.8 unsigned32 read-only
Represents the traffic rate (byte/s) on the downlink interface during a sampling period.
                   hh3cDot11APIfInUcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.9 counter32 read-only
Represents the number of unicast packets received on the interface.
                   hh3cDot11APIfInNUcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.10 counter32 read-only
Represents the number of non-unicast packets received on the wired interface.
                   hh3cDot11APIfInDiscardPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.11 counter32 read-only
Represents the number of unicast packets discarded on the interface.
                   hh3cDot11APIfOutUcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.12 counter32 read-only
Represents the number of unicast packets send on the interface.
                   hh3cDot11APIfOutNUcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.13 counter32 read-only
Represents the number of non-unicast packets send on the interface.
                   hh3cDot11APIfOutDiscardPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.14 counter32 read-only
Represents the number of discarded packets send on the interface.
                   hh3cDot11APIfOutErrorPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.15 counter32 read-only
Represents the number of error packets send on the interface.
                   hh3cDot11APIfUpdownTimes 1.3.6.1.4.1.25506.2.75.2.2.17.1.16 counter32 read-only
Represents the up/down times on the interface.
                   hh3cDot11APIfStatusKeepTime 1.3.6.1.4.1.25506.2.75.2.2.17.1.17 timeticks read-only
Represents the last change time on the interface.
                   hh3cDot11APIfOperStatus 1.3.6.1.4.1.25506.2.75.2.2.17.1.18 integer read-only
Represents the operational state of the interface. Enumeration: 'dormant': 5, 'lowerLayerDown': 7, 'unknown': 4, 'testing': 3, 'up': 1, 'down': 2, 'notPresent': 6.
                   hh3cDot11APIfInBrdcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.19 counter64 read-only
Represents the number of broadcast packets received on the interface.
                   hh3cDot11APIfOutBrdcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.20 counter64 read-only
Represents the number of broadcast packets sent on the interface.
                   hh3cDot11APIfInMulcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.21 counter64 read-only
Represents the number of multicast packets received on the interface.
                   hh3cDot11APIfOutMulcastPkts 1.3.6.1.4.1.25506.2.75.2.2.17.1.22 counter64 read-only
Represents the number of multicast packets sent on the interface.
                   hh3cDot11APIfInPayloadOctets 1.3.6.1.4.1.25506.2.75.2.2.17.1.23 counter64 read-only
Represents the number of actual octets received on the interface.
                   hh3cDot11APIfOutPayloadOctets 1.3.6.1.4.1.25506.2.75.2.2.17.1.24 counter64 read-only
Represents the number of actual octets sent on the interface.
         hh3cDot11RadioMngFrmStatisTable 1.3.6.1.4.1.25506.2.75.2.2.18 no-access
The table will provide the management frame statistic of this radio.
               hh3cDot11RadioMngFrmStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.18.1 no-access
Each entry of the table will provide the management frame statistic of this radio.
                   hh3cDot11MngFrmType 1.3.6.1.4.1.25506.2.75.2.2.18.1.1 integer no-access
Represents the type of the management frame on this radio. Enumeration: 'probeResp': 6, 'assocReq': 1, 'reassocResp': 4, 'atim': 8, 'beacon': 7, 'deauthentication': 11, 'disassociation': 9, 'action': 12, 'assocResp': 2, 'reassocReq': 3, 'probeReq': 5, 'authentication': 10.
                   hh3cDot11MngFrmCnt 1.3.6.1.4.1.25506.2.75.2.2.18.1.2 counter32 read-only
Represents the total number of each type of management frame on this radio.
         hh3cDot11APPacketSizeStatisTable 1.3.6.1.4.1.25506.2.75.2.2.19 no-access
This table provides packets statistic base on size.
               hh3cDot11APPacketSizeStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.19.1 no-access
Each entry provides packets statistic base on size for each radio of a specific AP.
                   hh3cDot11APPacketSize 1.3.6.1.4.1.25506.2.75.2.2.19.1.1 integer no-access
This node represents packet size: sizeLevel1 : size <= 128 sizeLevel2 : 128 < size <= 512 sizeLevel3 : 512 < size <= 1024 sizeLevel4 : size > 1024 Enumeration: 'sizeLevel3': 3, 'sizeLevel2': 2, 'sizeLevel1': 1, 'sizeLevel4': 4.
                   hh3cDot11APRXPacketSizeCount 1.3.6.1.4.1.25506.2.75.2.2.19.1.2 counter64 read-only
Represents the count of packets reception base on frame size.
                   hh3cDot11APTXPacketSizeCount 1.3.6.1.4.1.25506.2.75.2.2.19.1.3 counter64 read-only
Represents the count of packets transmission base on frame size.
         hh3cDot11APPacketRateStatisTable 1.3.6.1.4.1.25506.2.75.2.2.20 no-access
This table provides packets statistic base on rate.
               hh3cDot11APPacketRateStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.20.1 no-access
Each entry provides packets statistic base on rate for each radio of a specific AP.
                   hh3cDot11APPacketRate 1.3.6.1.4.1.25506.2.75.2.2.20.1.1 integer32 no-access
Represents transmit data rate(twice as actual rate).
                   hh3cDot11APRXPacketRateCount 1.3.6.1.4.1.25506.2.75.2.2.20.1.2 counter64 read-only
Represents the count of packets reception base on transmit data rate.
                   hh3cDot11APTXPacketRateCount 1.3.6.1.4.1.25506.2.75.2.2.20.1.3 counter64 read-only
Represents the count of packets transmission base on transmit data rate.
         hh3cDot11APPacketMCSRateStatisTable 1.3.6.1.4.1.25506.2.75.2.2.21 no-access
This table provides packets statistic base on MCS rate.
               hh3cDot11APPacketMCSRateStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.21.1 no-access
Each entry provides packets statistic base on MCS rate for each radio of a specific AP.
                   hh3cDot11APPacketMCSRate 1.3.6.1.4.1.25506.2.75.2.2.21.1.1 integer32 no-access
Represents transmit data rate(twice as actual rate).
                   hh3cDot11APRXPacketMCSRateCount 1.3.6.1.4.1.25506.2.75.2.2.21.1.2 counter64 read-only
Represents the count of packets reception base on transmit data rate.
                   hh3cDot11APTXPacketMCSRateCount 1.3.6.1.4.1.25506.2.75.2.2.21.1.3 counter64 read-only
Represents the count of packets transmission base on transmit data rate.
         hh3cDot11APAssocFailStatis3Table 1.3.6.1.4.1.25506.2.75.2.2.22 no-access
This table will provide statistic of association fails for each AP.
               hh3cDot11APAssocFailStatis3Entry 1.3.6.1.4.1.25506.2.75.2.2.22.1 no-access
Each entry will provide statistic of association failure with this AP because of different reasons.
                   hh3cDot11APAssocFailStatis3SRCnt 1.3.6.1.4.1.25506.2.75.2.2.22.1.1 counter32 read-only
This object represents the count of association failure because of lack of resource.
                   hh3cDot11APAssocFailStatis3NSRCnt 1.3.6.1.4.1.25506.2.75.2.2.22.1.2 counter32 read-only
This object represents the count of association failure because of not support rate set.
                   hh3cDot11APAssocFailStatis3URCCnt 1.3.6.1.4.1.25506.2.75.2.2.22.1.3 counter32 read-only
This object represents the count of association failure because of unknown reason code.
                   hh3cDot11APAssocFailStatis3RFCnt 1.3.6.1.4.1.25506.2.75.2.2.22.1.4 counter32 read-only
This object represents the count of association failure because of re-associate failed.
                   hh3cDot11APAssocFailStatis3OtherCnt 1.3.6.1.4.1.25506.2.75.2.2.22.1.5 counter32 read-only
This object represents the count of association fails because of reason not in 802.11 the protocol.
                   hh3cDot11APAssocFailStatis3RSSILowCntCM 1.3.6.1.4.1.25506.2.75.2.2.22.1.6 counter32 read-only
Represents the count of failed associations due to low RSSI.
         hh3cDot11APIfStatisByAPIDTable 1.3.6.1.4.1.25506.2.75.2.2.23 no-access
The table will provide the statistics on the interface of the AP.
               hh3cDot11APIfStatisByAPIDEntry 1.3.6.1.4.1.25506.2.75.2.2.23.1 no-access
Each entry of the table will provide statistics on the interface of the AP.
                   hh3cDot11APIfInPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.1 counter64 read-only
Represents the total number of packets received on the interface.
                   hh3cDot11APIfInNormalPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.2 counter64 read-only
Represents the total number of correct packets received on the interface.
                   hh3cDot11APIfInErrorPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.3 counter64 read-only
Represents the total number of error packets received on the interface.
                   hh3cDot11APIfOutPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.4 counter64 read-only
Represents the total number of packets sent from the interface.
                   hh3cDot11APIfInOctets2 1.3.6.1.4.1.25506.2.75.2.2.23.1.5 counter64 read-only
Represents the total number of octets received on the interface.
                   hh3cDot11APIfOutOctets2 1.3.6.1.4.1.25506.2.75.2.2.23.1.6 counter64 read-only
Represents the total number of octets sent from the interface.
                   hh3cDot11APIfFlowOut2 1.3.6.1.4.1.25506.2.75.2.2.23.1.7 unsigned32 read-only
Represents the traffic rate (byte/s) on the uplink interface during a sampling period.
                   hh3cDot11APIfFlowIN2 1.3.6.1.4.1.25506.2.75.2.2.23.1.8 unsigned32 read-only
Represents the traffic rate (byte/s) on the downlink interface during a sampling period.
                   hh3cDot11APIfInUcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.9 counter64 read-only
Represents the number of unicast packets received on the interface.
                   hh3cDot11APIfInNUcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.10 counter64 read-only
Represents the number of non-unicast packets received on the wired interface.
                   hh3cDot11APIfInDiscardPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.11 counter64 read-only
Represents the number of unicast packets discarded on the interface.
                   hh3cDot11APIfOutUcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.12 counter64 read-only
Represents the number of unicast packets send on the interface.
                   hh3cDot11APIfOutNUcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.13 counter64 read-only
Represents the number of non-unicast packets send on the interface.
                   hh3cDot11APIfOutDiscardPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.14 counter64 read-only
Represents the number of discarded packets send on the interface.
                   hh3cDot11APIfOutErrorPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.15 counter64 read-only
Represents the number of error packets send on the interface.
                   hh3cDot11APIfUpdownTimes2 1.3.6.1.4.1.25506.2.75.2.2.23.1.16 counter32 read-only
Represents the up/down times on the interface.
                   hh3cDot11APIfStatusKeepTime2 1.3.6.1.4.1.25506.2.75.2.2.23.1.17 timeticks read-only
Represents the last change time on the interface.
                   hh3cDot11APIfOperStatus2 1.3.6.1.4.1.25506.2.75.2.2.23.1.18 integer read-only
Represents the operational state of the interface. Enumeration: 'dormant': 5, 'lowerLayerDown': 7, 'unknown': 4, 'testing': 3, 'up': 1, 'down': 2, 'notPresent': 6.
                   hh3cDot11APIfInBrdcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.19 counter64 read-only
Represents the number of broadcast packets received on the interface.
                   hh3cDot11APIfOutBrdcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.20 counter64 read-only
Represents the number of broadcast packets sent on the interface.
                   hh3cDot11APIfInMulcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.21 counter64 read-only
Represents the number of multicast packets received on the interface.
                   hh3cDot11APIfOutMulcastPkts2 1.3.6.1.4.1.25506.2.75.2.2.23.1.22 counter64 read-only
Represents the number of multicast packets sent on the interface.
                   hh3cDot11APIfInPayloadOctets2 1.3.6.1.4.1.25506.2.75.2.2.23.1.23 counter64 read-only
Represents the number of actual octets received on the interface.
                   hh3cDot11APIfOutPayloadOctets2 1.3.6.1.4.1.25506.2.75.2.2.23.1.24 counter64 read-only
Represents the number of actual octets sent on the interface.
                   hh3cDot11APIfInDataOctets2 1.3.6.1.4.1.25506.2.75.2.2.23.1.25 counter64 read-only
Represents the number of actual data octets received on the interface.
                   hh3cDot11APIfOutDataOctets2 1.3.6.1.4.1.25506.2.75.2.2.23.1.26 counter64 read-only
Represents the number of actual data octets sent on the interface.
                   hh3cDot11APIfAdminStatus 1.3.6.1.4.1.25506.2.75.2.2.23.1.27 integer read-write
Expected state of the interface. In testing state the interface does not forward any operational packets. When a managed system is initialized, all interfaces start with hh3cDot11APIfAdminStatus in the down state. As a result of either explicit management action or per configuration information retained by the managed system, hh3cDot11APIfAdminStatus is then changed to either the up or testing state or remains in the down state. Enumeration: 'down': 2, 'testing': 3, 'up': 1.
                   hh3cDot11APIfOperStatusCM 1.3.6.1.4.1.25506.2.75.2.2.23.1.28 integer read-only
Operational status of the interface. Enumeration: 'down': 2, 'admindown': 4, 'testing': 3, 'up': 1.
         hh3cDot11APUserSecAuthStatisTable 1.3.6.1.4.1.25506.2.75.2.2.24 no-access
The table will provide the user authentication statistic for this AP.
               hh3cDot11APUserSecAuthStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.24.1 no-access
Each entry of the table will provide the user authentication statistic for this AP.
                   hh3cDot11APUserAuthCurNumber 1.3.6.1.4.1.25506.2.75.2.2.24.1.1 integer32 read-only
Represents the current number of user authenticated with this AP.
                   hh3cDot11APUserConnFailCnt 1.3.6.1.4.1.25506.2.75.2.2.24.1.2 counter32 read-only
Represents the total number of user disconnected with this AP.
                   hh3cDot11APUserAuthReqCnt 1.3.6.1.4.1.25506.2.75.2.2.24.1.3 counter32 read-only
Represents the total number of user authentication request with this AP.
                   hh3cDot11APUserAuthSuccCnt 1.3.6.1.4.1.25506.2.75.2.2.24.1.4 counter32 read-only
Represents the total number of successful authenticated users with this AP.
                   hh3cDot11APUserAuthFailCnt 1.3.6.1.4.1.25506.2.75.2.2.24.1.5 counter32 read-only
Represents the total number of user authentication failures with this AP.
                   hh3cDot11AllUserOnlineTime 1.3.6.1.4.1.25506.2.75.2.2.24.1.6 timeticks read-only
Represents the online time of all successful authenticated users with this AP.
         hh3cDot11APUserInfoStatisTable 1.3.6.1.4.1.25506.2.75.2.2.25 no-access
The table will provide the user information statistic of this AP.
               hh3cDot11APUserInfoStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.25.1 no-access
Each entry of the table will provide the user information statistic of this AP.
                   hh3cDot11APUserMacAddr 1.3.6.1.4.1.25506.2.75.2.2.25.1.1 macaddress no-access
Represents the mac address of user logging to this AP.
                   hh3cDot11APUserIpAddr 1.3.6.1.4.1.25506.2.75.2.2.25.1.2 ipaddress read-only
Represents the ip address of user logging to this AP.
                   hh3cDot11APUserLoginName 1.3.6.1.4.1.25506.2.75.2.2.25.1.3 octet string read-only
Represents the login name of user logging to this AP.
                   hh3cDot11APUserLoginTime 1.3.6.1.4.1.25506.2.75.2.2.25.1.4 octet string read-only
Represents the login time of user with this AP.
                   hh3cDot11APUserOnlineTime 1.3.6.1.4.1.25506.2.75.2.2.25.1.5 timeticks read-only
Represents the online time of user with this AP.
                   hh3cDot11APUserLoginNameCM 1.3.6.1.4.1.25506.2.75.2.2.25.1.6 octet string read-only
Represents the login name of dot1x user logging to this AP.
                   hh3cDot11APUserAuthTypeCM 1.3.6.1.4.1.25506.2.75.2.2.25.1.7 integer read-only
Represents the authentication type of user with this AP. authFree - There is no need others authentiaction, user will surf internet after association. associateAuth - Include WEP PSK authentication. portalAuth - The authentication lunched by portal pop-up program. autoAuth - 802.1X authentication. Enumeration: 'autoAuth': 4, 'authFree': 1, 'associateAuth': 2, 'portalAuth': 3.
                   hh3cDot11APUserTxPacketCntCM 1.3.6.1.4.1.25506.2.75.2.2.25.1.8 counter32 read-only
Represents the total count of packets sent to online users.
                   hh3cDot11APUserTxBytesCM 1.3.6.1.4.1.25506.2.75.2.2.25.1.9 counter64 read-only
Represents the total bytes sent to online users.
                   hh3cDot11APUserRxPacketCntCM 1.3.6.1.4.1.25506.2.75.2.2.25.1.10 counter32 read-only
Represents the total count of packets received from online users.
                   hh3cDot11APUserRxBytesCM 1.3.6.1.4.1.25506.2.75.2.2.25.1.11 counter64 read-only
Represents the total bytes received from online users.
         hh3cDot11APReassocStatis2Table 1.3.6.1.4.1.25506.2.75.2.2.26 no-access
This table will provide statistic of reassociation for each AP.
               hh3cDot11APReassocStatis2Entry 1.3.6.1.4.1.25506.2.75.2.2.26.1 no-access
Each entry will provide statistic of reassociation with this AP because of different reasons.
                   hh3cDot11APReassocFailStatis2Cnt 1.3.6.1.4.1.25506.2.75.2.2.26.1.1 counter32 read-only
This object represents the count of reassociation failure because of lack of resource.
         hh3cDot11TrafficTable 1.3.6.1.4.1.25506.2.75.2.2.27 no-access
The table describes user's traffic based on ssid
               hh3cDot11TrafficEntry 1.3.6.1.4.1.25506.2.75.2.2.27.1 no-access
Each entry contains the traffc information of a ssid.
                   hh3cDot11SSIDIndex 1.3.6.1.4.1.25506.2.75.2.2.27.1.1 octet string no-access
Represents the SSID.
                   hh3cDot11UpPacketNumber 1.3.6.1.4.1.25506.2.75.2.2.27.1.2 counter64 read-only
Represents the packet count of up link.
                   hh3cDot11UpByteNumber 1.3.6.1.4.1.25506.2.75.2.2.27.1.3 counter64 read-only
Represents the byte count of up link.
                   hh3cDot11DownPacketNumber 1.3.6.1.4.1.25506.2.75.2.2.27.1.4 counter64 read-only
Represents the packet count of down link.
                   hh3cDot11DownByteNumber 1.3.6.1.4.1.25506.2.75.2.2.27.1.5 counter64 read-only
Represents the byte count of down link.
         hh3cDot11APEchoStatisTable 1.3.6.1.4.1.25506.2.75.2.2.28 no-access
The table will provide the Echo statistic of this AP.
               hh3cDot11APEchoInfoStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.28.1 no-access
Each entry of the table will provide the Echo statistic of this AP.
                   hh3cDot11APEchoAvgDelay 1.3.6.1.4.1.25506.2.75.2.2.28.1.1 integer32 read-only
This object represents the average time delay of heart beat in this AP.
                   hh3cDot11APEchoRequestCnt 1.3.6.1.4.1.25506.2.75.2.2.28.1.2 counter64 read-only
This object represents the count of echo request in this AP.
                   hh3cDot11APEchoRespLossCnt 1.3.6.1.4.1.25506.2.75.2.2.28.1.3 counter64 read-only
This object represents the loss count of echo response in this AP.
         hh3cDot11APUserSecAuthTypeStatisTable 1.3.6.1.4.1.25506.2.75.2.2.29 no-access
The table will provide the user authentication type statistic for this AP.
               hh3cDot11APUserSecAuthTypeStatisEntry 1.3.6.1.4.1.25506.2.75.2.2.29.1 no-access
Each entry of the table will provide the user authentication type statistic for this AP.
                   hh3cDot11APPortalOnlineUserNum 1.3.6.1.4.1.25506.2.75.2.2.29.1.1 integer32 read-only
Represents the number of online portal users of this AP, including MAC-trigger and IMSIAuth users.
                   hh3cDot11APAuthFreeOnlineUserNum 1.3.6.1.4.1.25506.2.75.2.2.29.1.2 integer32 read-only
Represents the online number of user free authenticated with this AP.
                   hh3cDot11APAssocAuthOnlineUserNum 1.3.6.1.4.1.25506.2.75.2.2.29.1.3 integer32 read-only
Represents the number of online users authenticated by associated authentication with this AP, excluding AutoAuth users.
                   hh3cDot11APMacAuthOnlineUserNum 1.3.6.1.4.1.25506.2.75.2.2.29.1.4 integer32 read-only
Represents the online number of user MAC address authenticated with this AP.
                   hh3cDot11APAllPortalUserOnlineTime 1.3.6.1.4.1.25506.2.75.2.2.29.1.5 timeticks read-only
Represents the online time of all user portal authenticated with this AP.
                   hh3cDot11APAllAuthFreeUserOnlineTime 1.3.6.1.4.1.25506.2.75.2.2.29.1.6 timeticks read-only
Represents the online time of all user free authenticated with this AP.
                   hh3cDot11APAllAssocAuthUserOnlineTime 1.3.6.1.4.1.25506.2.75.2.2.29.1.7 timeticks read-only
Represents the online time of all user associated authenticated with this AP.
                   hh3cDot11APAllMacAuthUserOnlineTime 1.3.6.1.4.1.25506.2.75.2.2.29.1.8 timeticks read-only
Represents the online time of all user MAC address authenticated with this AP.
                   hh3cDot11APPortalUserLostCnntCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.9 counter32 read-only
Represents the lost connective count of user portal authenticated with this AP.
                   hh3cDot11APAuthFreeUserLostCnntCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.10 counter32 read-only
Represents the lost connective count of user free authenticated with this AP.
                   hh3cDot11APAssocAuthUserLostCnntCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.11 counter32 read-only
Represents the lost connective count of user associate authenticated with this AP.
                   hh3cDot11APMacAuthUserLostCnntCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.12 counter32 read-only
Represents the lost connective count of user MAC address authenticated with this AP.
                   hh3cDot11APPortalAuthReqCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.13 counter32 read-only
Represents the request count of user portal authenticated with this AP.
                   hh3cDot11APAssocAuthReqCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.14 counter32 read-only
Represents the request count of user associate authenticated with this AP.
                   hh3cDot11APMacAuthReqCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.15 counter32 read-only
Represents the request count of user MAC address authenticated with this AP.
                   hh3cDot11APPortalAuthSucCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.16 counter32 read-only
Represents the count of user portal authenticated successed with this AP.
                   hh3cDot11APAssocAuthSucCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.17 counter32 read-only
Represents the count of user associate authenticated successed with this AP.
                   hh3cDot11APMacAuthSucCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.18 counter32 read-only
Represents the count of user MAC address authenticated successed with this AP.
                   hh3cDot11APPortalAuthReqFailCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.19 counter32 read-only
Represents the count of user portal authenticated failed with this AP.
                   hh3cDot11APAssocAuthReqFailCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.20 counter32 read-only
Represents the count of user associate authenticated failed with this AP.
                   hh3cDot11APMacAuthReqFailCnt 1.3.6.1.4.1.25506.2.75.2.2.29.1.21 counter32 read-only
Represents the count of user MAC address authenticated failed with this AP.
                   hh3cDot11APAutoAuthOnlineUserNumCM 1.3.6.1.4.1.25506.2.75.2.2.29.1.22 integer32 read-only
Represents the number of online users authenticated by auto authentication with this AP.
                   hh3cDot11APAllAutoAuthUserOnlineTimeCM 1.3.6.1.4.1.25506.2.75.2.2.29.1.23 timeticks read-only
Represents the online time of users authenticated by auto authentication with this AP.
                   hh3cDot11APAutoAuthUserLostCnntCntCM 1.3.6.1.4.1.25506.2.75.2.2.29.1.24 counter32 read-only
Represents the disconnection count of AutoAuth users.
                   hh3cDot11APAutoAuthReqCntCM 1.3.6.1.4.1.25506.2.75.2.2.29.1.25 counter32 read-only
Represents the count of AutoAuth requests with this AP.
                   hh3cDot11APAutoAuthSucCntCM 1.3.6.1.4.1.25506.2.75.2.2.29.1.26 counter32 read-only
Represents the count of successful AutoAuth authentications with this AP.
                   hh3cDot11APAutoAuthReqFailCntCM 1.3.6.1.4.1.25506.2.75.2.2.29.1.27 counter32 read-only
Represents the count of failed AutoAuth requests with this AP.
         hh3cDot11RadioRxStatis64Table 1.3.6.1.4.1.25506.2.75.2.2.30 no-access
The table will provide the reception statistic for a specific radio of AP.
               hh3cDot11RadioRxStatis64Entry 1.3.6.1.4.1.25506.2.75.2.2.30.1 no-access
Each entry of the table will provide the reception statistic data for each radio of a specific AP.
                   hh3cDot11Rx64FrameDupCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.1 counter64 read-only
Represents the number of duplicate frames reception.
                   hh3cDot11Rx64FrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.2 counter64 read-only
Represents the number of frames reception.
                   hh3cDot11Rx64UcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.3 counter64 read-only
Represents the number of unicast frames reception.
                   hh3cDot11Rx64BcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.4 counter64 read-only
Represents the number of broadcast frames reception.
                   hh3cDot11Rx64McastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.5 counter64 read-only
Represents the number of multicast frames reception.
                   hh3cDot11Rx64DiscardFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.6 counter64 read-only
Represents the number of discarded frames reception.
                   hh3cDot11Rx64FragCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.7 counter64 read-only
Represents the number of frame fragments reception.
                   hh3cDot11Rx64FcsErrCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.8 counter64 read-only
Represents the number of FCS error frames reception.
                   hh3cDot11Rx64FrameBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.9 counter64 read-only
Represents the bytes of frames reception.
                   hh3cDot11Rx64UcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.10 counter64 read-only
Represents the bytes of unicast frames reception.
                   hh3cDot11Rx64BcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.11 counter64 read-only
Represents the bytes of broadcast frames reception.
                   hh3cDot11Rx64McastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.12 counter64 read-only
Represents the bytes of multicast frames reception.
                   hh3cDot11Rx64DiscardFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.13 counter64 read-only
Represents the bytes of discarded frames reception.
                   hh3cDot11Rx64MgmtFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.14 counter64 read-only
Represents the number of management frames reception.
                   hh3cDot11Rx64CtrlFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.15 counter64 read-only
Represents the number of control frames reception.
                   hh3cDot11Rx64DataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.16 counter64 read-only
Represents the number of data frames reception.
                   hh3cDot11Rx64DecryptErrorCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.17 counter64 read-only
Represents the number of decryption error reception.
                   hh3cDot11Rx64AuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.18 counter64 read-only
Represents the number of authentication frame reception.
                   hh3cDot11Rx64AssociateFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.19 counter64 read-only
Represents the number of associate frame reception.
                   hh3cDot11Rx64PhyErrorCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.20 counter64 read-only
Represents the number of physical error reception.
                   hh3cDot11Rx64MICErrorCnt 1.3.6.1.4.1.25506.2.75.2.2.30.1.21 counter64 read-only
Represents the number of MIC verification error reception.
                   hh3cDot11Rx64DataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.22 counter64 read-only
Represents the bytes of data frames reception.
                   hh3cDot11Rx64PayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.30.1.23 counter64 read-only
Represents the payload bytes of data frames reception.
                   hh3cDot11Rx64DataFrameBytesCM 1.3.6.1.4.1.25506.2.75.2.2.30.1.24 counter64 read-only
Represents the number of received data frames, excluding retransmitted frames.
         hh3cDot11RadioTxStatis64Table 1.3.6.1.4.1.25506.2.75.2.2.31 no-access
The table will provide the transmission statistic for a specific radio of AP.
               hh3cDot11RadioTxStatis64Entry 1.3.6.1.4.1.25506.2.75.2.2.31.1 no-access
Each entry of the table will provide the transmission statistic data for each radio of a specific AP.
                   hh3cDot11Tx64FragCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.1 counter64 read-only
Represents the number of fragmented frames transmission.
                   hh3cDot11Tx64FailedCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.2 counter64 read-only
Represents the number of failures transmission.
                   hh3cDot11Tx64RetryCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.3 counter64 read-only
Represents the number of retries transmission.
                   hh3cDot11Tx64MultiRetryCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.4 counter64 read-only
Represents the number of transmits that required more than one retry transmission.
                   hh3cDot11Tx64RtsSuccessCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.5 counter64 read-only
Represents the number of successful RTS (Request to send) transmission.
                   hh3cDot11Tx64RtsFailCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.6 counter64 read-only
Represents the number of RTS failures transmission.
                   hh3cDot11Tx64AckFailCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.7 counter64 read-only
Represents the number of acknowledgement failures transmission.
                   hh3cDot11Tx64FrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.8 counter64 read-only
Represents the total number of frames transmission.
                   hh3cDot11Tx64UcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.9 counter64 read-only
Represents the number of unicast frames transmission.
                   hh3cDot11Tx64BcastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.10 counter64 read-only
Represents the number of broadcast frames transmission.
                   hh3cDot11Tx64McastFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.11 counter64 read-only
Represents the number of multicast frames transmission.
                   hh3cDot11Tx64DiscardFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.12 counter64 read-only
Represents the number of discarded frames transmission.
                   hh3cDot11Tx64FrameBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.13 counter64 read-only
Represents the total bytes of frames transmission.
                   hh3cDot11Tx64UcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.14 counter64 read-only
Represents the bytes of unicast frames transmission.
                   hh3cDot11Tx64BcastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.15 counter64 read-only
Represents the bytes of broadcast frames transmission.
                   hh3cDot11Tx64McastFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.16 counter64 read-only
Represents the bytes of multicast frames transmission.
                   hh3cDot11Tx64DiscardFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.17 counter64 read-only
Represents the bytes of discard frames transmission.
                   hh3cDot11Tx64AuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.18 counter64 read-only
Represents the number of authentication frame transmission.
                   hh3cDot11Tx64AssociateFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.19 counter64 read-only
Represents the number of associate frame transmission.
                   hh3cDot11Tx64DataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.20 counter64 read-only
Represents the number of data frame transmission.
                   hh3cDot11Tx64DataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.21 counter64 read-only
Represents the bytes of data frame transmission.
                   hh3cDot11Tx64MSDUCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.22 counter64 read-only
Represents the total number of MSDU transmission.
                   hh3cDot11Tx64DiscardMSDUCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.23 counter64 read-only
Represents the number of discarded MSDU transmission.
                   hh3cDot11Tx64RetryMSDUCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.24 counter64 read-only
Represents the number of retransfer MSDU transmission.
                   hh3cDot11Tx64PayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.31.1.25 counter64 read-only
Represents the payload bytes of data frames transmission.
                   hh3cDot11Tx64MgtFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.26 counter64 read-only
Represents the number of management frames transmission.
                   hh3cDot11Tx64CtrlFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.27 counter64 read-only
Represents the number of control frames transmission.
                   hh3cDot11Tx64MACErrCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.28 counter64 read-only
Represents the number of MAC error frame transmission.
                   hh3cDot11Tx64ErrFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.31.1.29 counter64 read-only
Represents the number of error frame transmission.
         hh3cDot11BSSRxStatis64Table 1.3.6.1.4.1.25506.2.75.2.2.32 no-access
The table will provide the reception statistic for a specific BSS on a radio.
               hh3cDot11BSSRxStatis64Entry 1.3.6.1.4.1.25506.2.75.2.2.32.1 no-access
Each entry of the table will provide the reception statistic data for each BSS on a specific radio.
                   hh3cDot11BSSRx64FrameCnt 1.3.6.1.4.1.25506.2.75.2.2.32.1.1 counter64 read-only
Represents the number of frames reception with this BSS.
                   hh3cDot11BSSRx64FrameBytes 1.3.6.1.4.1.25506.2.75.2.2.32.1.2 counter64 read-only
Represents the bytes of frames reception with this BSS.
                   hh3cDot11BSSRx64DataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.32.1.3 counter64 read-only
Represents the number of data frames reception with this BSS.
                   hh3cDot11BSSRx64DataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.32.1.4 counter64 read-only
Represents the bytes of data frames reception with this BSS.
                   hh3cDot11BSSRx64AssocFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.32.1.5 counter64 read-only
Represents the number of associate frames reception with this BSS.
                   hh3cDot11BSSRx64PayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.32.1.6 counter64 read-only
Represents the payload bytes of data frames reception with this BSS.
                   hh3cDot11BSSRx64UniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.32.1.7 counter64 read-only
Represents the number of unicast frames reception with this BSS.
                   hh3cDot11BSSRx64NonUniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.32.1.8 counter64 read-only
Represents the number of non-unicast frames reception with this BSS.
                   hh3cDot11BSSRx64AuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.32.1.9 counter64 read-only
Represents the number of authentication frames reception with this BSS.
         hh3cDot11BSSTxStatis64Table 1.3.6.1.4.1.25506.2.75.2.2.33 no-access
The table will provide the transmission statistic for a specific BSS on a radio.
               hh3cDot11BSSTxStatis64Entry 1.3.6.1.4.1.25506.2.75.2.2.33.1 no-access
Each entry of the table will provide the transmission statistic data for each BSS on a specific radio.
                   hh3cDot11BSSTx64FrameCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.1 counter64 read-only
Represents the total number of frames transmission with this BSS.
                   hh3cDot11BSSTx64FrameBytes 1.3.6.1.4.1.25506.2.75.2.2.33.1.2 counter64 read-only
Represents the total number of bytes transmission with this BSS.
                   hh3cDot11BSSTx64DataFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.3 counter64 read-only
Represents the number of data frame transmission with this BSS.
                   hh3cDot11BSSTx64DataFrameBytes 1.3.6.1.4.1.25506.2.75.2.2.33.1.4 counter64 read-only
Represents the bytes of data frame transmission with this BSS.
                   hh3cDot11BSSTx64AssocFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.5 counter64 read-only
Represents the number of associate frame transmission with this BSS.
                   hh3cDot11BSSTx64PayloadBytes 1.3.6.1.4.1.25506.2.75.2.2.33.1.6 counter64 read-only
Represents the payload bytes of data frame transmission with this BSS.
                   hh3cDot11BSSTx64RetryCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.7 counter64 read-only
Represents the number of bytes retransmitted with this BSS.
                   hh3cDot11BSSTx64UniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.8 counter64 read-only
Represents the number of unicast frames transmission with this BSS.
                   hh3cDot11BSSTx64NonUniFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.9 counter64 read-only
Represents the number of non-unicast frames transmission with this BSS.
                   hh3cDot11BSSTx64AuthenFrameCnt 1.3.6.1.4.1.25506.2.75.2.2.33.1.10 counter64 read-only
Represents the number of authentication frames transmission with this BSS.
         hh3cDot11APPacketMCSRateStatis2Table 1.3.6.1.4.1.25506.2.75.2.2.34 no-access
This table provides packet statistics based on MCS rate.
               hh3cDot11APPacketMCSRateStatis2Entry 1.3.6.1.4.1.25506.2.75.2.2.34.1 no-access
Each entry provides packet statistics based on MCS rate for each radio of a specific AP.
                   hh3cDot11APPacketMCS2Rate 1.3.6.1.4.1.25506.2.75.2.2.34.1.1 integer32 no-access
Represents data transmission rate(Tenfold as actual rate).
                   hh3cDot11APRXPacketMCSRate2Count 1.3.6.1.4.1.25506.2.75.2.2.34.1.2 counter64 read-only
Represents the count of packets received based on data transmission rate.
                   hh3cDot11APTXPacketMCSRate2Count 1.3.6.1.4.1.25506.2.75.2.2.34.1.3 counter64 read-only
Represents the count of packets transmitted base on data transmission rate.
         hh3cDot11APUserSecAuthStatisCMTable 1.3.6.1.4.1.25506.2.75.2.2.35 no-access
The table provides the user authentication statistics.
               hh3cDot11APUserSecAuthStatisCMEntry 1.3.6.1.4.1.25506.2.75.2.2.35.1 no-access
Each entry of the table provides the user authentication statistics of AP.
                   hh3cDot11APUserConnFailCntCM 1.3.6.1.4.1.25506.2.75.2.2.35.1.1 counter32 read-only
Represents the failed connection count of users with this AP.
                   hh3cDot11APUserAuthReqCntCM 1.3.6.1.4.1.25506.2.75.2.2.35.1.2 counter32 read-only
Represents the total number of user authentication requests with this AP.
                   hh3cDot11APUserAuthSuccCntCM 1.3.6.1.4.1.25506.2.75.2.2.35.1.3 counter32 read-only
Represents the total number of successful user authentications with this AP.
                   hh3cDot11APUserAuthFailCntCM 1.3.6.1.4.1.25506.2.75.2.2.35.1.4 counter32 read-only
Represents the total number of failed user authentications with this AP.
                   hh3cDot11AllUserOnlineTimeCM 1.3.6.1.4.1.25506.2.75.2.2.35.1.5 timeticks read-only
Represents the online time of all users with this AP.
         hh3cDot11APUserInfoStatis2CMTable 1.3.6.1.4.1.25506.2.75.2.2.36 no-access
The table will provide the authentication user information statistic of this AP.
               hh3cDot11APUserInfoStatis2CMEntry 1.3.6.1.4.1.25506.2.75.2.2.36.1 no-access
Each entry of the table will provide the authentication user information statistic of this AP.
                   hh3cDot11APUserMacAddr2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.1 macaddress no-access
Represents the mac address of authentication user logging to this AP.
                   hh3cDot11APUserIpAddr2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.2 ipaddress read-only
Represents the ip address of authentication user logging to this AP.
                   hh3cDot11APUserLoginName2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.3 octet string read-only
Represents the login name of authentication user logging to this AP.
                   hh3cDot11APUserLoginTime2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.4 octet string read-only
Represents the login time of authentication user with this AP.
                   hh3cDot11APUserOnlineTime2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.5 timeticks read-only
Represents how long authentication user has been online.
                   hh3cDot11APUserAuthType2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.6 integer read-only
Represents the authentication type of user with this AP. authFree - There is no need others authentiaction, user will surf internet after association. associateAuth - Include WEP PSK authentication. portalAuth - The authentication lunched by portal pop-up program. autoAuth - 802.1X authentication. Enumeration: 'autoAuth': 4, 'authFree': 1, 'associateAuth': 2, 'portalAuth': 3.
                   hh3cDot11APUserTxPacketCnt2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.7 counter32 read-only
Represents the total count of packets sent to online users.
                   hh3cDot11APUserTxBytes2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.8 counter64 read-only
Represents the total bytes sent to online users.
                   hh3cDot11APUserRxPacketCnt2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.9 counter32 read-only
Represents the total count of packets received from online users.
                   hh3cDot11APUserRxBytes2CM 1.3.6.1.4.1.25506.2.75.2.2.36.1.10 counter64 read-only
Represents the total bytes received from online users.
     hh3cDot11APMtNotifyGroup 1.3.6.1.4.1.25506.2.75.2.3
         hh3cDot11APMtTraps 1.3.6.1.4.1.25506.2.75.2.3.0
             hh3cDot11APMtWorkModeChgTrap 1.3.6.1.4.1.25506.2.75.2.3.0.1
The notification will be sent when AP changes the work mode, and hh3cDot11APWorkMode suggests which work mode will be used by AP.
             hh3cDot11APMtCfgErrorTrap 1.3.6.1.4.1.25506.2.75.2.3.0.2
The notification will represent errors caused by the configuration operation of AP.
             hh3cDot11APMtRadioFailTrap 1.3.6.1.4.1.25506.2.75.2.3.0.3
The notification will notify which the operational status of radio becomes down.
             hh3cDot11APMtRadioFailRecoverTrap 1.3.6.1.4.1.25506.2.75.2.3.0.4
The notification will notify the operational status of which radio becomes up again.
             hh3cDot11APMtRdoChanlChgTrap 1.3.6.1.4.1.25506.2.75.2.3.0.5
The notification will represent which radio changes the channel.
             hh3cDot11APMtTimeSynFail 1.3.6.1.4.1.25506.2.75.2.3.0.6
The notification will be sent when AC and AP failed to synchronize their time.
             hh3cDot11APMtChlIntfDetected 1.3.6.1.4.1.25506.2.75.2.3.0.7
The notification will be sent when some ambient device interferes with current channel.
             hh3cDot11APMtIntfAPDetected 1.3.6.1.4.1.25506.2.75.2.3.0.8
The notification will be sent when some ambient AP interferes with current channel.
             hh3cDot11APMtIntfStaDetected 1.3.6.1.4.1.25506.2.75.2.3.0.9
The notification will be sent when some ambient station interferes with current channel.
             hh3cDot11APMtIPChange 1.3.6.1.4.1.25506.2.75.2.3.0.10
The notification will be sent when IP address of the AP changes.
             hh3cDot11APFlashWriteFailure 1.3.6.1.4.1.25506.2.75.2.3.0.11
The notification will be sent when AP failed to write data into flash.
             hh3cDot11APSysReboot 1.3.6.1.4.1.25506.2.75.2.3.0.12
The notification will be sent when AP reboots.
             hh3cDot11APMtAvailChlTooLow 1.3.6.1.4.1.25506.2.75.2.3.0.13
The notification will be sent when number of available channels is too low.
             hh3cDot11APImgDwldSuccess 1.3.6.1.4.1.25506.2.75.2.3.0.14
The notification will be sent when AP succeeds to download image from AC.
             hh3cDot11APInterfDetectedTrap 1.3.6.1.4.1.25506.2.75.2.3.0.15
This notification will be sent when some ambient AP interferes with current channel.
             hh3cDot11APInterfClearTrap 1.3.6.1.4.1.25506.2.75.2.3.0.16
This notification will be sent when interference caused by ambient APs on the current channel disappears.
             hh3cDot11StaInterfDetectedTrap 1.3.6.1.4.1.25506.2.75.2.3.0.17
This notification will be sent when interference caused by ambient STAs on the current channel disappears.
             hh3cDot11StaInterfClearTrap 1.3.6.1.4.1.25506.2.75.2.3.0.18
This notification will be sent when interference caused by ambient devices on the current channel happens.
             hh3cDot11OtherDevIntDetectedTrap 1.3.6.1.4.1.25506.2.75.2.3.0.19
This notification will be sent when interference caused by ambient devices on the current channel disappears.
             hh3cDot11OtherDevIntClearTrap 1.3.6.1.4.1.25506.2.75.2.3.0.20
This notification will be sent when previous ambient device disappeared with the same channel.
             hh3cDot11APModuleTroubleTrap 1.3.6.1.4.1.25506.2.75.2.3.0.21
This notification will be sent when WLAN module failed.
             hh3cDot11APModuleTroubleClearTrap 1.3.6.1.4.1.25506.2.75.2.3.0.22
The notification will be sent when WLAN module recovered.
             hh3cDot11APRadioDownTrap 1.3.6.1.4.1.25506.2.75.2.3.0.23
This notification will be sent when WLAN links interrupted.
             hh3cDot11APRadioDownRecovTrap 1.3.6.1.4.1.25506.2.75.2.3.0.24
This notification will be sent when WLAN links recover.
             hh3cDot11APStaFullTrap 1.3.6.1.4.1.25506.2.75.2.3.0.25
This notification will be sent when STA number reach limit number.
             hh3cDot11APStaFullRecoverTrap 1.3.6.1.4.1.25506.2.75.2.3.0.26
This notification will be sent when STA number recover enough level.
             hh3cDot11DFSFreeCntBelowThrRecov 1.3.6.1.4.1.25506.2.75.2.3.0.27
This notification will be sent when available channels number recover enough level.
             hh3cDot11APCpuUsageHigh 1.3.6.1.4.1.25506.2.75.2.3.0.28
The notification will be sent when the AP CPU usage exceeds the threshold.
             hh3cDot11APCpuUsageHighRecover 1.3.6.1.4.1.25506.2.75.2.3.0.29
The notification will be sent when the AP CPU usage descends the threshold.
             hh3cDot11APMemUsageHigh 1.3.6.1.4.1.25506.2.75.2.3.0.30
The notification will be sent when the AP memory usage exceeds the threshold.
             hh3cDot11APMemUsageHighRecover 1.3.6.1.4.1.25506.2.75.2.3.0.31
The notification will be sent when the AP memory usage descends the threshold.
             hh3cDot11APTrapUserCntExceedThre 1.3.6.1.4.1.25506.2.75.2.3.0.32
The notification will be sent when the online user counter exceeds the threshold.
             hh3cDot11APMtDetectedIntfAP 1.3.6.1.4.1.25506.2.75.2.3.0.33
This notification will be sent when some ambient AP interferes with current channel.
             hh3cDot11APMtDetectedIntfSTA 1.3.6.1.4.1.25506.2.75.2.3.0.34
This notification will be sent when some ambient STA interferes with current channel.
             hh3cDot11APMtDetectedIntfOtherDev 1.3.6.1.4.1.25506.2.75.2.3.0.35
This notification will be sent when other device interferes with current channel.
             hh3cDot11DetcAdjChlIntfAP 1.3.6.1.4.1.25506.2.75.2.3.0.36
This notification will be sent when some ambient AP interferes with adjacent channel.
             hh3cDot11DetcAdjChlIntfAPClear 1.3.6.1.4.1.25506.2.75.2.3.0.37
This notification will be sent when interference caused by ambient APs on the adjacent channel disappears.
             hh3cDot11APPowerOffTrap 1.3.6.1.4.1.25506.2.75.2.3.0.38
This notification will be sent when AP is power-off.
             hh3cDot11APPowerOnTrap 1.3.6.1.4.1.25506.2.75.2.3.0.39
This notification will be sent when AP is power-on.
             hh3cDot11UpLinkSwitchTrap 1.3.6.1.4.1.25506.2.75.2.3.0.40
This notification will be sent when uplink switches to 3G or 4G.
         hh3cDot11APMtTrapVarObjects 1.3.6.1.4.1.25506.2.75.2.3.1
             hh3cDot11APMtTrapCfgErrReason 1.3.6.1.4.1.25506.2.75.2.3.1.1 hh3cdot11notifyreasontype no-access
Represents errors caused by configuration operation.
             hh3cDot11APMtTrapRadioFailReason 1.3.6.1.4.1.25506.2.75.2.3.1.2 integer no-access
Represents errors caused by configuration operation. The following values are supported: config - Configuration error hh3cerror - Hardware error swerror - Software error radar - Radar Detection unknown - Unknown reason Enumeration: 'hh3cerror': 2, 'swerror': 3, 'config': 1, 'unknown': 8, 'radar': 4.
             hh3cDot11APMtTrapOldChannel 1.3.6.1.4.1.25506.2.75.2.3.1.3 hh3cdot11channelscopetype no-access
Represents which channel the radio used to use.
             hh3cDot11APMtTrapNewChannel 1.3.6.1.4.1.25506.2.75.2.3.1.4 hh3cdot11channelscopetype no-access
Represents which channel the radio will use.
             hh3cDot11APChannelChgMode 1.3.6.1.4.1.25506.2.75.2.3.1.5 hh3cdot11rfmodetype no-access
Represents the channel change mode for a radio.
             hh3cDot11APChgWorkMode 1.3.6.1.4.1.25506.2.75.2.3.1.6 integer no-access
Represents what work mode for AP. The following values are supported: normal - AP will supply WLAN service. monitor - AP will be a monitor to detect attack. hybrid - AP will supply WLAN service and detect attack. Enumeration: 'hybrid': 3, 'monitor': 2, 'normal': 1.
             hh3cDot11APIntfDevMACAddress 1.3.6.1.4.1.25506.2.75.2.3.1.7 macaddress no-access
Represents MAC address of the device which triggers the notification.
             hh3cDot11APMtTrapOldIPAddr 1.3.6.1.4.1.25506.2.75.2.3.1.8 ipaddress no-access
Represents the IP address of AP.
             hh3cDot11CurrInterfDetectedNum 1.3.6.1.4.1.25506.2.75.2.3.1.9 integer32 no-access
Represents the number of interfere detected.
             hh3cDot11StaFullReason 1.3.6.1.4.1.25506.2.75.2.3.1.10 integer no-access
Reports which kind maximum number of STA is reached. New STA is not able to associate. Enumeration: 'ac': 6, 'radioConcur': 4, 'acConcur': 7, 'bss': 2, 'ap': 1, 'radio': 3, 'aid': 8, 'radiopolicy': 5.
             hh3cDot11StaLimitNumber 1.3.6.1.4.1.25506.2.75.2.3.1.11 integer32 no-access
Represents the limit number of STA.
             hh3cDot11APRadioDownReason 1.3.6.1.4.1.25506.2.75.2.3.1.12 integer no-access
Reports the reason why WLAN links is interrupted. Enumeration: 'phyicalUnusable': 1, 'apTunnelDown': 4, 'operatinUnusable': 3, 'configDisable': 2.
             hh3cDot11InterfMacList 1.3.6.1.4.1.25506.2.75.2.3.1.13 octet string no-access
Represents MAC address list of interfere detected.
             hh3cDot11APTrapUserCnt 1.3.6.1.4.1.25506.2.75.2.3.1.14 integer32 no-access
Represents the online user counter of AP.
             hh3cDot11APTrapUserThreshold 1.3.6.1.4.1.25506.2.75.2.3.1.15 integer32 no-access
Represents threshold of AP's online user counter.
             hh3cDot11APMtChanlChgCount 1.3.6.1.4.1.25506.2.75.2.3.1.16 integer32 no-access
Represents how many times that channel changed.
             hh3cDot11APMtFormerApVersion 1.3.6.1.4.1.25506.2.75.2.3.1.17 octet string no-access
Represents former software version of AP.
             hh3cDot11APMtAPID 1.3.6.1.4.1.25506.2.75.2.3.1.18 hh3cdot11objectidtype no-access
To uniquely identify each AP.
             hh3cDot11APMtRadioID 1.3.6.1.4.1.25506.2.75.2.3.1.19 hh3cdot11radioscopetype no-access
Represents each radio.
             hh3cDot11APMtChannel 1.3.6.1.4.1.25506.2.75.2.3.1.20 hh3cdot11channelscopetype no-access
Represents the current channel allocation for radio.
             hh3cDot11APMtInterfMacAdd 1.3.6.1.4.1.25506.2.75.2.3.1.21 macaddress no-access
Represents the MAC address of an AP.
             hh3cDot11APMtAdjChannel 1.3.6.1.4.1.25506.2.75.2.3.1.22 hh3cdot11channelscopetype no-access
Represents the adjacent channel of radio.
             hh3cDot11APMtFirstTrapTime 1.3.6.1.4.1.25506.2.75.2.3.1.23 timeticks no-access
Represents the first trap time.
             hh3cDot11APMtTrapAPMacAddress 1.3.6.1.4.1.25506.2.75.2.3.1.24 macaddress no-access
Represents the MAC address of an AP.
             hh3cDot11APMtUpLinkSwitchInfo 1.3.6.1.4.1.25506.2.75.2.3.1.25 integer no-access
Represents the type which uplink switches to. The following values are supported: TDSCDMA - The uplink switches to TDSCDMA. TDLTE - The uplink switches to TDLTE. unknown - Unknown uplink type. Enumeration: 'tdlte': 3, 'unknown': 1, 'tdscdma': 2.
             hh3cDot11APMtUpLinkSwitchTime 1.3.6.1.4.1.25506.2.75.2.3.1.26 timestamp no-access
Represents the time when uplink switches.
             hh3cDot11APMtOldCellId 1.3.6.1.4.1.25506.2.75.2.3.1.27 integer32 no-access
Represents the cell id before uplink switch.
             hh3cDot11APMtCurCellId 1.3.6.1.4.1.25506.2.75.2.3.1.28 integer32 no-access
Represents the cell id after uplink switch.
             hh3cDot11APMtOldBand 1.3.6.1.4.1.25506.2.75.2.3.1.29 octet string no-access
Represents the band before uplink switch.
             hh3cDot11APMtActiveBand 1.3.6.1.4.1.25506.2.75.2.3.1.30 octet string no-access
Represents the band after uplink switch.