HH3C-DOMAIN-MIB: View SNMP OID List / Download MIB

VENDOR: H3C


 Home MIB: HH3C-DOMAIN-MIB
Download as:   
SNMPv2-CONF, SNMPv2-SMI, INET-ADDRESS-MIB, HH3C-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 hh3cDomain 1.3.6.1.4.1.25506.2.46
The MIB module is used for managing domain.
       hh3cDomainControl 1.3.6.1.4.1.25506.2.46.1
           hh3cDomainDefault 1.3.6.1.4.1.25506.2.46.1.1 octet string read-write
Specifies default domain on the equipment. Default value is 'system'.
       hh3cDomainTables 1.3.6.1.4.1.25506.2.46.2
           hh3cDomainInfoTable 1.3.6.1.4.1.25506.2.46.2.1 no-access
The (conceptual) table listing the domains.
               hh3cDomainInfoEntry 1.3.6.1.4.1.25506.2.46.2.1.1 no-access
An entry (conceptual row) representing a domain.
                   hh3cDomainName 1.3.6.1.4.1.25506.2.46.2.1.1.1 octet string no-access
An index uniquely identifies a domain.
                   hh3cDomainState 1.3.6.1.4.1.25506.2.46.2.1.1.2 integer read-only
The state of the domain, which reflects whether the domain is active. Default value is active. Enumeration: 'active': 1, 'block': 2.
                   hh3cDomainMaxAccessNum 1.3.6.1.4.1.25506.2.46.2.1.1.3 integer32 read-only
The maximum number which the domain allows to access. If the value is set to 0, the access limit will be disabled.
                   hh3cDomainVlanAssignMode 1.3.6.1.4.1.25506.2.46.2.1.1.4 integer read-only
The vlan assignment mode. The mode SHOULD be the same as the mode of corresponding server. 1 (integer) - Integer Vlan assignment mode. 2 (string) - String Vlan assignment mode. 3 (vlanlist) - VLAN-List Vlan assignment mode. The default value is integer. Enumeration: 'integer': 1, 'vlanlist': 3, 'string': 2.
                   hh3cDomainIdleCutEnable 1.3.6.1.4.1.25506.2.46.2.1.1.5 truthvalue read-only
The idle cut control. Setting this attribute to true, the connection will be cut when the flow is less than hh3cDomainIdleCutMinFlow and lasts hh3cDomainIdleCutMaxTime. Default value is false.
                   hh3cDomainIdleCutMaxTime 1.3.6.1.4.1.25506.2.46.2.1.1.6 integer32 read-only
The maximal time of idle-cut. The unit is minute. If the value of hh3cDomainIdleCutEnable is false, the value of hh3cDomainIdleCutMaxTime is meaningless.
                   hh3cDomainIdleCutMinFlow 1.3.6.1.4.1.25506.2.46.2.1.1.7 integer32 read-only
The minimal flow of idle-cut. The unit is byte. If the value of hh3cDomainIdleCutEnable is false, the value of hh3cDomainIdleCutMinFlow is meaningless.
                   hh3cDomainMessengerEnable 1.3.6.1.4.1.25506.2.46.2.1.1.8 truthvalue read-only
The messenger service control. If set hh3cDomainMessengerEnable to true, hh3cDomainMessengerLimitTime and hh3cDomainMessengerSpanTime must be set to valid values. Default value is false.
                   hh3cDomainMessengerLimitTime 1.3.6.1.4.1.25506.2.46.2.1.1.9 integer32 read-only
The messenger service limit time. The unit is minute. If the value of hh3cDomainMessengerEnable is false, the value of hh3cDomainMessengerLimitTime is meaningless.
                   hh3cDomainMessengerSpanTime 1.3.6.1.4.1.25506.2.46.2.1.1.10 integer32 read-only
The messenger service span time. The unit is minute. It must be a multiple of 5. If the value of hh3cDomainMessengerEnable is false, the value of hh3cDomainMessengerSpanTime is meaningless.
                   hh3cDomainSelfServiceEnable 1.3.6.1.4.1.25506.2.46.2.1.1.11 truthvalue read-only
The self service control. If set hh3cDomainSelfServiceEnable to true, hh3cDomainSelfServiceURL must be set to a valid value. Default value is FALSE.
                   hh3cDomainSelfServiceURL 1.3.6.1.4.1.25506.2.46.2.1.1.12 octet string read-only
Self-service URL(Uniform Resource Locator) of the domain.
                   hh3cDomainAccFailureAction 1.3.6.1.4.1.25506.2.46.2.1.1.13 integer read-only
Defines the action that authentication should be taken if authentication succeeds but the associated accounting start fails. 1 (ignore) - treat as authentication success; ignore accounting start failure. 2 (reject) - treat as authentication failed if corresponding accounting start fails. Default value is reject. Enumeration: 'ignore': 1, 'reject': 2.
                   hh3cDomainRowStatus 1.3.6.1.4.1.25506.2.46.2.1.1.14 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To destroy an existent row, the domain of the row MUST NOT be used by user.
                   hh3cDomainCurrentAccessNum 1.3.6.1.4.1.25506.2.46.2.1.1.15 integer32 read-only
The current access number of the domain.
           hh3cDomainSchemeTable 1.3.6.1.4.1.25506.2.46.2.2 no-access
The (conceptual) table listing schemes of all domains.
               hh3cDomainSchemeEntry 1.3.6.1.4.1.25506.2.46.2.2.1 no-access
An entry (conceptual row) representing an IP pool of a domain
                   hh3cDomainSchemeIndex 1.3.6.1.4.1.25506.2.46.2.2.1.1 integer32 no-access
The scheme index of domain, which is an identifier of a domain scheme.
                   hh3cDomainSchemeMode 1.3.6.1.4.1.25506.2.46.2.2.1.2 hh3cmodeofdomainscheme read-only
The scheme mode of the domain. Setting hh3cDomainSchemeMode to none(1) indicates the domain has none scheme. Setting hh3cDomainSchemeMode to local(2) indicates the domain will use local-server as a scheme. Setting hh3cDomainSchemeMode to radius(3) or tacacs(4) indicates the domain will use radius or tacacs scheme. If set hh3cDomainSchemeMode to radius(3) or tacacs(4), hh3cDomainAuthSchemeName and hh3cDomainAcctSchemeName must be set to valid values. And if hh3cDomainSchemeMode is set to none(1) or local(2), the value of hh3cDomainAuthSchemeName and hh3cDomainAcctSchemeName will be ignored.
                   hh3cDomainAuthSchemeName 1.3.6.1.4.1.25506.2.46.2.2.1.3 octet string read-only
The authentication scheme name of domain. If hh3cDomainSchemeMode is set to radius or tacacs, the hh3cDomainAuthSchemeName must be configured with a valid value.
                   hh3cDomainAcctSchemeName 1.3.6.1.4.1.25506.2.46.2.2.1.4 octet string read-only
The accounting scheme name of the domain. If hh3cDomainSchemeMode is set to radius or tacacs, the hh3cDomainAcctSchemeName must be configured with a valid value.
                   hh3cDomainSchemeRowStatus 1.3.6.1.4.1.25506.2.46.2.2.1.5 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and createAndGo, destroy operation. To create a new row, hh3cDomainSchemeMode must be specified. To destroy an existent row, the scheme of the row MUST NOT be used by user.
                   hh3cDomainSchemeAAAType 1.3.6.1.4.1.25506.2.46.2.2.1.6 hh3caaatypedomainscheme read-only
Service Type of the server.
                   hh3cDomainSchemeAAAName 1.3.6.1.4.1.25506.2.46.2.2.1.7 octet string read-only
The scheme name of the domain, whether the scheme represents accounting, authentication or authorization references the object hh3cDomainSchemeAAAType. The value of the object must be valid if the value of hh3cDomainSchemeMode is radius or tacacs, the value of the object will be ignored if the value of hh3cDomainSchemeMode is none or local. If the domain has no scheme, there will be a null string. If this object is supported, the objects hh3cDomainAuthSchemeName and hh3cDomainAcctSchemeName will be ignored.
                   hh3cDomainSchemeAccessMode 1.3.6.1.4.1.25506.2.46.2.2.1.8 hh3caccessmodeofdomainscheme read-only
The access mode of the domain scheme.
           hh3cDomainIpPoolTable 1.3.6.1.4.1.25506.2.46.2.3 no-access
The (conceptual) table listing IP pools of all domains.
               hh3cDomainIpPoolEntry 1.3.6.1.4.1.25506.2.46.2.3.1 no-access
An entry (conceptual row) representing an IP pool of a domain.
                   hh3cDomainIpPoolNum 1.3.6.1.4.1.25506.2.46.2.3.1.1 integer32 no-access
The number of IP pool, which is an identifier of an IP pool.
                   hh3cDomainIpPoolLowIpAddrType 1.3.6.1.4.1.25506.2.46.2.3.1.2 inetaddresstype read-only
The low IP addresses type (IPv4 or IPv6) of IP pool.
                   hh3cDomainIpPoolLowIpAddr 1.3.6.1.4.1.25506.2.46.2.3.1.3 inetaddress read-only
The low IP address of IP pool.
                   hh3cDomainIpPoolLen 1.3.6.1.4.1.25506.2.46.2.3.1.4 integer32 read-only
The length of IP pool. Default value is 1.
                   hh3cDomainIpPoolRowStatus 1.3.6.1.4.1.25506.2.46.2.3.1.5 rowstatus read-only
This object is responsible for managing the creation, deletion and modification of rows, which supports active status and CreateAndGo, Destroy operation. To create a new row, hh3cDomainIpPoolNum and hh3cDomainIpPoolLowIpAddr must be specified. To destroy an existent row, the IP pool of this row MUST NOT be used by user.