H3C-VOICE-IF-MIB: View SNMP OID List / Download MIB

VENDOR: HUAWEI


 Home MIB: H3C-VOICE-IF-MIB
Download as:   
SNMPv2-CONF, IF-MIB, SNMPv2-SMI, HUAWEI-3COM-OID-MIB, SNMPv2-TC

Download standard MIB format if you are planning to load a MIB file into some system (OS, Zabbix, PRTG ...) or view it with a MIB browser. CSV is more suitable for analyzing and viewing OID' and other MIB objects in excel. JSON and YAML formats are usually used in programing even though some systems can use MIB in YAML format (like Logstash).
Keep in mind that standard MIB files can be successfully loaded by systems and programs only if all the required MIB's from the "Imports" section are already loaded.
The tree-like SNMP object navigator requires no explanations because it is very simple to use. And if you stumbled on this MIB from Google note that you can always go back to the home page if you need to perform another MIB or OID lookup.


Object Name OID Type Access Info
 h3cVoiceInterface 1.3.6.1.4.1.2011.10.2.39.13
This MIB file is to provide the definition of the voice interface general configuration.
       h3cVoiceIfObjects 1.3.6.1.4.1.2011.10.2.39.13.1
           h3cVoiceIfConfigTable 1.3.6.1.4.1.2011.10.2.39.13.1.1 no-access
The table contains configurable parameters for both analog voice interface and digital voice interface.
               h3cVoiceIfConfigEntry 1.3.6.1.4.1.2011.10.2.39.13.1.1.1 no-access
The entry of voice interface table.
                   h3cVoiceIfCfgCngOn 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.1 integer read-write
This object indicates whether the silence gaps should be filled with background noise. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Enumeration: 'enable': 1, 'disable': 2.
                   h3cVoiceIfCfgNonLinearSwitch 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.2 integer read-write
This object expresses the nonlinear processing is enable or disable for the voice interface. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Currently, only digital voice subscriber lines can be set disabled. Enumeration: 'enable': 1, 'disable': 2.
                   h3cVoiceIfCfgInputGain 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.3 integer32 read-write
This object indicates the amount of gain added to the receiver side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
                   h3cVoiceIfCfgOutputGain 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.4 integer32 read-write
This object indicates the amount of gain added to the send side of the voice interface. Unit is 0.1 db. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
                   h3cVoiceIfCfgEchoCancelSwitch 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.5 integer read-write
This object indicates whether the echo cancellation is enabled. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. Enumeration: 'enable': 1, 'disable': 2.
                   h3cVoiceIfCfgEchoCancelDelay 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.6 integer32 read-write
This object indicates the delay of the echo cancellation for the voice interface. This value couldn't be modified unless h3cVoiceIfCfgEchoCancelSwitch is enable. Unit is milliseconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line. The default value of this object is 32.
                   h3cVoiceIfCfgTimerDialInterval 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.7 integer32 read-write
The interval, in seconds, between two dialing numbers. The default value of this object is 10 seconds. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
                   h3cVoiceIfCfgTimerFirstDial 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.8 integer32 read-write
The period of time, in seconds, before dialing the first number. The default value of this object is 10 seconds. It is applicable to FXO, FXS subscriber lines and E1/T1 with loop-start or ground-start protocol voice subscriber line.
                   h3cVoiceIfCfgPrivateline 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.9 displaystring read-write
This object indicates the E.164 phone number for plar mode. It is applicable to FXO, FXS, E&M subscriber lines and E1/T1 voice subscriber line.
                   h3cVoiceIfCfgRegTone 1.3.6.1.4.1.2011.10.2.39.13.1.1.1.10 octet string read-write
This object uses 2 or 3 letter country code specify voice parameters of different countrys. This value will take effect on all voice interfaces of all cards on the device.